Currently wmi.h has two separate set of definitions for peer
flags. One set of flags is defined in enum wmi_tlv_peer_flags, and,
except for the last three, are named WMI_TLV_PEER_*. The other set of
flags are defined as macros, and are named WMI_PEER_*. The last three
macros have the same name as the last three wmi_tlv_peer_flags
enumerators.
The code only uses the WMI_PEER_* names; the WMI_TLV_PEER_* names are
unused. So as a first step in consolidation, remove all the
WMI_TLV_PEER_* names.
But since having an enum to define all the flags is actually a good
thing since that provides a handle by which to refer to the entire set
of flags, recast the WMI_PEER_* macros into enumerators.
Compile tested only.
Signed-off-by: Jeff Johnson <[email protected]>
---
drivers/net/wireless/ath/ath11k/wmi.h | 59 +++++++++++------------------------
1 file changed, 18 insertions(+), 41 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 42e4234be69b..3ad29d5d0999 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -1096,25 +1096,27 @@ enum wmi_tlv_vdev_param {
};
enum wmi_tlv_peer_flags {
- WMI_TLV_PEER_AUTH = 0x00000001,
- WMI_TLV_PEER_QOS = 0x00000002,
- WMI_TLV_PEER_NEED_PTK_4_WAY = 0x00000004,
- WMI_TLV_PEER_NEED_GTK_2_WAY = 0x00000010,
- WMI_TLV_PEER_APSD = 0x00000800,
- WMI_TLV_PEER_HT = 0x00001000,
- WMI_TLV_PEER_40MHZ = 0x00002000,
- WMI_TLV_PEER_STBC = 0x00008000,
- WMI_TLV_PEER_LDPC = 0x00010000,
- WMI_TLV_PEER_DYN_MIMOPS = 0x00020000,
- WMI_TLV_PEER_STATIC_MIMOPS = 0x00040000,
- WMI_TLV_PEER_SPATIAL_MUX = 0x00200000,
- WMI_TLV_PEER_VHT = 0x02000000,
- WMI_TLV_PEER_80MHZ = 0x04000000,
- WMI_TLV_PEER_PMF = 0x08000000,
+ WMI_PEER_AUTH = 0x00000001,
+ WMI_PEER_QOS = 0x00000002,
+ WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
+ WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
+ WMI_PEER_HE = 0x00000400,
+ WMI_PEER_APSD = 0x00000800,
+ WMI_PEER_HT = 0x00001000,
+ WMI_PEER_40MHZ = 0x00002000,
+ WMI_PEER_STBC = 0x00008000,
+ WMI_PEER_LDPC = 0x00010000,
+ WMI_PEER_DYN_MIMOPS = 0x00020000,
+ WMI_PEER_STATIC_MIMOPS = 0x00040000,
+ WMI_PEER_SPATIAL_MUX = 0x00200000,
+ WMI_PEER_TWT_REQ = 0x00400000,
+ WMI_PEER_TWT_RESP = 0x00800000,
+ WMI_PEER_VHT = 0x02000000,
+ WMI_PEER_80MHZ = 0x04000000,
+ WMI_PEER_PMF = 0x08000000,
WMI_PEER_IS_P2P_CAPABLE = 0x20000000,
WMI_PEER_160MHZ = 0x40000000,
WMI_PEER_SAFEMODE_EN = 0x80000000,
-
};
/** Enum list of TLV Tags for each parameter structure type. */
@@ -4061,31 +4063,6 @@ struct wmi_unit_test_cmd {
#define MAX_SUPPORTED_RATES 128
-#define WMI_PEER_AUTH 0x00000001
-#define WMI_PEER_QOS 0x00000002
-#define WMI_PEER_NEED_PTK_4_WAY 0x00000004
-#define WMI_PEER_NEED_GTK_2_WAY 0x00000010
-#define WMI_PEER_HE 0x00000400
-#define WMI_PEER_APSD 0x00000800
-#define WMI_PEER_HT 0x00001000
-#define WMI_PEER_40MHZ 0x00002000
-#define WMI_PEER_STBC 0x00008000
-#define WMI_PEER_LDPC 0x00010000
-#define WMI_PEER_DYN_MIMOPS 0x00020000
-#define WMI_PEER_STATIC_MIMOPS 0x00040000
-#define WMI_PEER_SPATIAL_MUX 0x00200000
-#define WMI_PEER_TWT_REQ 0x00400000
-#define WMI_PEER_TWT_RESP 0x00800000
-#define WMI_PEER_VHT 0x02000000
-#define WMI_PEER_80MHZ 0x04000000
-#define WMI_PEER_PMF 0x08000000
-/* TODO: Place holder for WLAN_PEER_F_PS_PRESEND_REQUIRED = 0x10000000.
- * Need to be cleaned up
- */
-#define WMI_PEER_IS_P2P_CAPABLE 0x20000000
-#define WMI_PEER_160MHZ 0x40000000
-#define WMI_PEER_SAFEMODE_EN 0x80000000
-
struct beacon_tmpl_params {
u8 vdev_id;
u32 tim_ie_offset;
--
2.42.0