This is a patch to add blkcnt_t as the type of inode.i_blocks.
This enables you to make the size of blkcnt_t either 4 bytes or 8 bytes
on 32 bits architecture with CONFIG_LSF.
The content of the patch attached to this mail is below.
- CONFIG_LSF
Add new configuration parameter.
- blkcnt_t
On h8300, i386, mips, powerpc, s390 and sh that define sector_t,
blkcnt_t is defined as u64 if CONFIG_LSF is enabled; otherwise it is
defined as unsigned long.
On other architectures, it is defined as unsigned long.
- inode.i_blocks
Change the type from sector_t to blkcnt_t.
Any feedback and comments are welcome.
Signed-off-by: Takashi Sato <[email protected]>
diff -uprN -X linux-2.6.15-rc5-iblocks/Documentation/dontdiff linux-2.6.15-rc5-iblocks/block/Kconfig
linux-2.6.15-rc5-blocks/block/Kconfig
--- linux-2.6.15-rc5-iblocks/block/Kconfig 2005-12-13 11:51:46.000000000 +0900
+++ linux-2.6.15-rc5-blocks/block/Kconfig 2005-12-14 14:58:32.425068960 +0900
@@ -6,9 +6,19 @@
config LBD
bool "Support for Large Block Devices"
depends on X86 || (MIPS && 32BIT) || PPC32 || ARCH_S390_31 || SUPERH || UML
+ select LSF
help
Say Y here if you want to attach large (bigger than 2TB) discs to
your machine, or if you want to have a raid or loopback device
bigger than 2TB. Otherwise say N.
+config LSF
+ bool "Support for Large Single Files"
+ depends on X86 || (MIPS && 32BIT) || PPC32 || ARCH_S390_31 || SUPERH || UML
+ default n
+ help
+ When CONFIG_LBD is disabled, say Y here if you want to
+ handle large file(bigger than 2TB), otherwise say N.
+ When CONFIG_LBD is enabled, Y is set automatically.
+
source block/Kconfig.iosched
diff -uprN -X linux-2.6.15-rc5-iblocks/Documentation/dontdiff linux-2.6.15-rc5-iblocks/include/asm-h8300/types.h
linux-2.6.15-rc5-blocks/include/asm-h8300/types.h
--- linux-2.6.15-rc5-iblocks/include/asm-h8300/types.h 2005-10-28 09:02:08.000000000 +0900
+++ linux-2.6.15-rc5-blocks/include/asm-h8300/types.h 2005-12-14 09:07:43.000000000 +0900
@@ -58,6 +58,9 @@ typedef u32 dma_addr_t;
#define HAVE_SECTOR_T
typedef u64 sector_t;
+#define HAVE_BLKCNT_T
+typedef u64 blkcnt_t;
+
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
diff -uprN -X linux-2.6.15-rc5-iblocks/Documentation/dontdiff linux-2.6.15-rc5-iblocks/include/asm-i386/types.h
linux-2.6.15-rc5-blocks/include/asm-i386/types.h
--- linux-2.6.15-rc5-iblocks/include/asm-i386/types.h 2005-10-28 09:02:08.000000000 +0900
+++ linux-2.6.15-rc5-blocks/include/asm-i386/types.h 2005-12-14 09:05:33.000000000 +0900
@@ -63,6 +63,11 @@ typedef u64 sector_t;
#define HAVE_SECTOR_T
#endif
+#ifdef CONFIG_LSF
+typedef u64 blkcnt_t;
+#define HAVE_BLKCNT_T
+#endif
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
diff -uprN -X linux-2.6.15-rc5-iblocks/Documentation/dontdiff linux-2.6.15-rc5-iblocks/include/asm-mips/types.h
linux-2.6.15-rc5-blocks/include/asm-mips/types.h
--- linux-2.6.15-rc5-iblocks/include/asm-mips/types.h 2005-10-28 09:02:08.000000000 +0900
+++ linux-2.6.15-rc5-blocks/include/asm-mips/types.h 2005-12-14 09:08:04.000000000 +0900
@@ -99,6 +99,11 @@ typedef u64 sector_t;
#define HAVE_SECTOR_T
#endif
+#ifdef CONFIG_LSF
+typedef u64 blkcnt_t;
+#define HAVE_BLKCNT_T
+#endif
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
diff -uprN -X linux-2.6.15-rc5-iblocks/Documentation/dontdiff linux-2.6.15-rc5-iblocks/include/asm-powerpc/types.h
linux-2.6.15-rc5-blocks/include/asm-powerpc/types.h
--- linux-2.6.15-rc5-iblocks/include/asm-powerpc/types.h 2005-12-13 11:51:54.000000000 +0900
+++ linux-2.6.15-rc5-blocks/include/asm-powerpc/types.h 2005-12-14 09:06:21.000000000 +0900
@@ -103,6 +103,11 @@ typedef u64 sector_t;
#define HAVE_SECTOR_T
#endif
+#ifdef CONFIG_LSF
+typedef u64 blkcnt_t;
+#define HAVE_BLKCNT_T
+#endif
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
diff -uprN -X linux-2.6.15-rc5-iblocks/Documentation/dontdiff linux-2.6.15-rc5-iblocks/include/asm-s390/types.h
linux-2.6.15-rc5-blocks/include/asm-s390/types.h
--- linux-2.6.15-rc5-iblocks/include/asm-s390/types.h 2005-10-28 09:02:08.000000000 +0900
+++ linux-2.6.15-rc5-blocks/include/asm-s390/types.h 2005-12-14 09:06:02.000000000 +0900
@@ -93,6 +93,11 @@ typedef u64 sector_t;
#define HAVE_SECTOR_T
#endif
+#ifdef CONFIG_LSF
+typedef u64 blkcnt_t;
+#define HAVE_BLKCNT_T
+#endif
+
#endif /* ! __s390x__ */
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
diff -uprN -X linux-2.6.15-rc5-iblocks/Documentation/dontdiff linux-2.6.15-rc5-iblocks/include/asm-sh/types.h
linux-2.6.15-rc5-blocks/include/asm-sh/types.h
--- linux-2.6.15-rc5-iblocks/include/asm-sh/types.h 2005-10-28 09:02:08.000000000 +0900
+++ linux-2.6.15-rc5-blocks/include/asm-sh/types.h 2005-12-14 09:07:01.000000000 +0900
@@ -58,6 +58,11 @@ typedef u64 sector_t;
#define HAVE_SECTOR_T
#endif
+#ifdef CONFIG_LSF
+typedef u64 blkcnt_t;
+#define HAVE_BLKCNT_T
+#endif
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
diff -uprN -X linux-2.6.15-rc5-iblocks/Documentation/dontdiff linux-2.6.15-rc5-iblocks/include/linux/fs.h
linux-2.6.15-rc5-blocks/include/linux/fs.h
--- linux-2.6.15-rc5-iblocks/include/linux/fs.h 2005-12-13 11:58:09.000000000 +0900
+++ linux-2.6.15-rc5-blocks/include/linux/fs.h 2005-12-14 08:59:59.000000000 +0900
@@ -450,7 +450,7 @@ struct inode {
unsigned int i_blkbits;
unsigned long i_blksize;
unsigned long i_version;
- sector_t i_blocks;
+ blkcnt_t i_blocks;
unsigned short i_bytes;
spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */
struct semaphore i_sem;
diff -uprN -X linux-2.6.15-rc5-iblocks/Documentation/dontdiff linux-2.6.15-rc5-iblocks/include/linux/types.h
linux-2.6.15-rc5-blocks/include/linux/types.h
--- linux-2.6.15-rc5-iblocks/include/linux/types.h 2005-12-13 11:51:55.000000000 +0900
+++ linux-2.6.15-rc5-blocks/include/linux/types.h 2005-12-14 09:07:26.000000000 +0900
@@ -135,6 +135,10 @@ typedef __s64 int64_t;
typedef unsigned long sector_t;
#endif
+#ifndef HAVE_BLKCNT_T
+typedef unsigned long blkcnt_t;
+#endif
+
/*
* The type of an index into the pagecache. Use a #define so asm/types.h
* can override it.
-- Takashi Sato