Hi Arjan,
Sorry, for late response.
----- Original Message -----
From: "Arjan van de Ven" <[email protected]>
To: "Masayuki Ohtak" <[email protected]>
Cc: <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>;
<[email protected]>; <[email protected]>; <[email protected]>
Sent: Friday, August 06, 2010 1:40 PM
Subject: Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
> On 8/5/2010 9:33 PM, Masayuki Ohtak wrote:
> >
> > +config PCH_I2C
> > + tristate "PCH I2C"
> >
>
> this is really not very descriptive. Can you make it "OKI Semi PCH I2C
> controller" or something
We will modify.
>
> if you has human get asked "PCH I2C"... almost nobody will know what
> that means.+static irqreturn_t pch_handler_ch0(int irq, void *pData);
>
>
> > +static irqreturn_t(*pch_handler_list[PCH_MAX_CHN]) (int irq, void *pData) = {
> > + pch_handler_ch0,
> > +};
> >
>
> hummmmmm what is this for??
This is callback function list for mulit-cahnnel I2C device.
>
>
> > +
> > +static inline void pch_setbit(void __iomem *addr, u32 offset, u32 bitmask)
> > +{
> > + iowrite32(((ioread32(addr + offset)) | (bitmask)), (addr + offset));
> > +}
> >
>
> this might be more readble if it's made 3 lines with a local variable...
> + "Cleared the registers PCH_I2CCTL,PCH_I2CMOD,PCH_I2CBUFFOR\n,"
>
>
> > + "PCH_I2CBUFSLV,PCH_I2CBUFSUB,PCH_I2CBUFMSK,\n"
> >
I will divide to 3 lines.
>
> what's that weird character ?diff --git a/drivers/i2c/i2c-dev.c
> b/drivers/i2c/i2c-dev.c
> + case I2C_MODE_SEL:
>
>
> > + pch_mode = arg;
> > +
> > + if (pch_mode <= 4) {
> > + msgbuf[0] = pch_mode;
> > + msg.buf = msgbuf;
> > + msg.len = 1;
> > + msg.flags = 0;
> > + ret = i2c_transfer(client->adapter, &msg, 1);
> >
>
> in generic code??
>
>
I will revert i2c-dev.c.
I will submit modified patch soon.
Thanks, Ohtake(OKISemi)