Well, ok, and I will try it again.
Thanks.
----- Original Message -----
From: "Greg KH" <[email protected]>
To: "fangxiaozhi 00110321" <[email protected]>
Cc: <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>
Sent: Wednesday, October 08, 2008 11:21 AM
Subject: Re: PATCH 10/4]linux-usb: To support more Huawei data card productIDs, fix kernel 2.6.27-rc7
> On Wed, Oct 08, 2008 at 09:31:35AM +0800, fangxiaozhi 00110321 wrote:
>> From: fangxiaozhi <[email protected]>
>>
>> 1. This patch is based on the kernel of 2.6.27-rc7
>> 2. In this patch, we want to do one thing: add more Huawei product IDs into the USB driver. Then it can support more Huawei data card devices. So to declare the unusual device for new Huawei data card devices
>> in unusual_devs.h and to declare more new product IDs in option.c.
>> 3. To modify the data value and length in the function of
>> usb_stor_huawei_e220_init in initializers.c
>> That's because based on the USB standard, while sending SET_FETURE_D to the device, it requires the corresponding data to be zero, and its sending length also must be zero.
>> In our old solution, it can be compatible with our WCDMA data card devices, but can not support our CDMA data card devices.
>> But in this new solution, it can be compatible with all of our data card devices.
>>
>> Signed-off-by: fangxiaozhi <[email protected]>
>> -------------------------------------------------------------------
>>
>> diff -uprN -X linux-2.6.27-rc7-orig/Documentation/dontdiff linux-2.6.27-rc7-orig/drivers/usb/serial/option.c linux-2.6.27-rc7/drivers/usb/serial/option.c
>> --- linux-2.6.27-rc7-orig/drivers/usb/serial/option.c 2008-09-22 06:29:55.000000000 +0800
>> +++ linux-2.6.27-rc7/drivers/usb/serial/option.c 2008-09-24 12:00:14.000000000 +0800
>> @@ -106,11 +106,20 @@ static int option_send_setup(struct tty
>> #define HUAWEI_PRODUCT_E220 0x1003
>> #define HUAWEI_PRODUCT_E220BIS 0x1004
>> #define HUAWEI_PRODUCT_E1401 0x1401
>> +#define HUAWEI_PRODUCT_E1402 0x1402
>
> Hm, all of the tabs seem to have been converted to spaces in this patch,
> and it does not apply at all.
>
> Care to fix your email client settings and try again?
>
> thanks,
>
> greg k-h