From: Varadarajan Narayanan <[email protected]>
Add programming sequence support for managing the Stromer
PLLs.
Co-developed-by: Sricharan R <[email protected]>
Signed-off-by: Sricharan R <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
Signed-off-by: Kathiravan T <[email protected]>
---
Changes since V3:
- Updated the title with correct patch version
Changes since V2:
- splitted this patch from IPQ5018 series[1]
- Rebased on linux-6.2-rc1
[1]
https://lore.kernel.org/linux-arm-msm/[email protected]/
drivers/clk/qcom/clk-alpha-pll.c | 100 ++++++++++++++++++++++++++++++-
drivers/clk/qcom/clk-alpha-pll.h | 7 ++-
2 files changed, 105 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index f9e4cfd7261c..29866100df08 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -204,9 +204,24 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
[PLL_OFF_CONFIG_CTL] = 0x1C,
[PLL_OFF_STATUS] = 0x20,
},
+ [CLK_ALPHA_PLL_TYPE_STROMER] = {
+ [PLL_OFF_L_VAL] = 0x08,
+ [PLL_OFF_ALPHA_VAL] = 0x10,
+ [PLL_OFF_ALPHA_VAL_U] = 0x14,
+ [PLL_OFF_USER_CTL] = 0x18,
+ [PLL_OFF_USER_CTL_U] = 0x1c,
+ [PLL_OFF_CONFIG_CTL] = 0x20,
+ [PLL_OFF_CONFIG_CTL_U] = 0xff,
+ [PLL_OFF_TEST_CTL] = 0x30,
+ [PLL_OFF_TEST_CTL_U] = 0x34,
+ [PLL_OFF_STATUS] = 0x28,
+ },
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
+static unsigned long
+alpha_pll_round_rate(unsigned long rate, unsigned long prate, u32 *l, u64 *a,
+ u32 alpha_width);
/*
* Even though 40 bits are present, use only 32 for ease of calculation.
*/
@@ -215,6 +230,8 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
#define ALPHA_BITWIDTH 32U
#define ALPHA_SHIFT(w) min(w, ALPHA_BITWIDTH)
+#define ALPHA_PLL_STATUS_REG_SHIFT 8
+
#define PLL_HUAYRA_M_WIDTH 8
#define PLL_HUAYRA_M_SHIFT 8
#define PLL_HUAYRA_M_MASK 0xff
@@ -325,7 +342,7 @@ static void clk_alpha_pll_write_config(struct regmap *regmap, unsigned int reg,
void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config)
{
- u32 val, mask;
+ u32 val, val_u, mask, mask_u;
regmap_write(regmap, PLL_L_VAL(pll), config->l);
regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
@@ -355,14 +372,85 @@ void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
mask |= config->pre_div_mask;
mask |= config->post_div_mask;
mask |= config->vco_mask;
+ mask |= config->alpha_en_mask;
+ mask |= config->alpha_mode_mask;
regmap_update_bits(regmap, PLL_USER_CTL(pll), mask, val);
+ /* Stromer APSS PLL does not enable LOCK_DET by default, so enable it */
+ val_u = config->status_reg_val << ALPHA_PLL_STATUS_REG_SHIFT;
+ val_u |= config->lock_det;
+
+ mask_u = config->status_reg_mask;
+ mask_u |= config->lock_det;
+
+ if (val_u)
+ regmap_update_bits(regmap, PLL_USER_CTL_U(pll), mask_u, val_u);
+
+ if (config->test_ctl_val)
+ regmap_write(regmap, PLL_TEST_CTL(pll), config->test_ctl_val);
+
+ if (config->test_ctl_hi_val)
+ regmap_write(regmap, PLL_TEST_CTL_U(pll), config->test_ctl_hi_val);
+
if (pll->flags & SUPPORTS_FSM_MODE)
qcom_pll_set_fsm_mode(regmap, PLL_MODE(pll), 6, 0);
}
EXPORT_SYMBOL_GPL(clk_alpha_pll_configure);
+static int clk_alpha_pll_stromer_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ u32 l;
+ u64 a;
+
+ req->rate = alpha_pll_round_rate(req->rate, req->best_parent_rate,
+ &l, &a, ALPHA_REG_BITWIDTH);
+
+ return 0;
+}
+
+static int clk_alpha_pll_stromer_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long prate)
+{
+ struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+ u32 l;
+ int ret;
+ u64 a;
+
+ rate = alpha_pll_round_rate(rate, prate, &l, &a, ALPHA_REG_BITWIDTH);
+
+ regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
+ regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
+ regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll),
+ a >> ALPHA_BITWIDTH);
+
+ regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
+ PLL_ALPHA_EN, PLL_ALPHA_EN);
+
+ if (!clk_hw_is_enabled(hw))
+ return 0;
+
+ /*
+ * Stromer PLL supports Dynamic programming.
+ * It allows the PLL frequency to be changed on-the-fly without first
+ * execution of a shutdown procedure followed by a bring up procedure.
+ */
+
+ regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_UPDATE,
+ PLL_UPDATE);
+
+ ret = wait_for_pll_update(pll);
+ if (ret)
+ return ret;
+
+ ret = wait_for_pll_enable_lock(pll);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static int clk_alpha_pll_hwfsm_enable(struct clk_hw *hw)
{
int ret;
@@ -1013,6 +1101,16 @@ const struct clk_ops clk_alpha_pll_hwfsm_ops = {
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_hwfsm_ops);
+const struct clk_ops clk_alpha_pll_stromer_ops = {
+ .enable = clk_alpha_pll_enable,
+ .disable = clk_alpha_pll_disable,
+ .is_enabled = clk_alpha_pll_is_enabled,
+ .recalc_rate = clk_alpha_pll_recalc_rate,
+ .determine_rate = clk_alpha_pll_stromer_determine_rate,
+ .set_rate = clk_alpha_pll_stromer_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_stromer_ops);
+
const struct clk_ops clk_alpha_pll_fixed_trion_ops = {
.enable = clk_trion_pll_enable,
.disable = clk_trion_pll_disable,
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 2bdae362c827..1d122919e275 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved. */
+/* Copyright (c) 2015, 2018, 2021 The Linux Foundation. All rights reserved. */
#ifndef __QCOM_CLK_ALPHA_PLL_H__
#define __QCOM_CLK_ALPHA_PLL_H__
@@ -22,6 +22,7 @@ enum {
CLK_ALPHA_PLL_TYPE_RIVIAN_EVO,
CLK_ALPHA_PLL_TYPE_DEFAULT_EVO,
CLK_ALPHA_PLL_TYPE_BRAMMO_EVO,
+ CLK_ALPHA_PLL_TYPE_STROMER,
CLK_ALPHA_PLL_TYPE_MAX,
};
@@ -131,6 +132,9 @@ struct alpha_pll_config {
u32 post_div_mask;
u32 vco_val;
u32 vco_mask;
+ u32 status_reg_val;
+ u32 status_reg_mask;
+ u32 lock_det;
};
extern const struct clk_ops clk_alpha_pll_ops;
@@ -139,6 +143,7 @@ extern const struct clk_ops clk_alpha_pll_hwfsm_ops;
extern const struct clk_ops clk_alpha_pll_postdiv_ops;
extern const struct clk_ops clk_alpha_pll_huayra_ops;
extern const struct clk_ops clk_alpha_pll_postdiv_ro_ops;
+extern const struct clk_ops clk_alpha_pll_stromer_ops;
extern const struct clk_ops clk_alpha_pll_fabia_ops;
extern const struct clk_ops clk_alpha_pll_fixed_fabia_ops;
--
2.17.1
On 12/27/2022 6:55 PM, Kathiravan T wrote:
> From: Varadarajan Narayanan <[email protected]>
>
> Add programming sequence support for managing the Stromer
> PLLs.
>
> Co-developed-by: Sricharan R <[email protected]>
> Signed-off-by: Sricharan R <[email protected]>
> Signed-off-by: Varadarajan Narayanan <[email protected]>
> Signed-off-by: Kathiravan T <[email protected]>
Gentle ping!...
> ---
> Changes since V3:
> - Updated the title with correct patch version
>
> Changes since V2:
> - splitted this patch from IPQ5018 series[1]
> - Rebased on linux-6.2-rc1
> [1]
> https://lore.kernel.org/linux-arm-msm/[email protected]/
>
> drivers/clk/qcom/clk-alpha-pll.c | 100 ++++++++++++++++++++++++++++++-
> drivers/clk/qcom/clk-alpha-pll.h | 7 ++-
> 2 files changed, 105 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index f9e4cfd7261c..29866100df08 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -204,9 +204,24 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
> [PLL_OFF_CONFIG_CTL] = 0x1C,
> [PLL_OFF_STATUS] = 0x20,
> },
> + [CLK_ALPHA_PLL_TYPE_STROMER] = {
> + [PLL_OFF_L_VAL] = 0x08,
> + [PLL_OFF_ALPHA_VAL] = 0x10,
> + [PLL_OFF_ALPHA_VAL_U] = 0x14,
> + [PLL_OFF_USER_CTL] = 0x18,
> + [PLL_OFF_USER_CTL_U] = 0x1c,
> + [PLL_OFF_CONFIG_CTL] = 0x20,
> + [PLL_OFF_CONFIG_CTL_U] = 0xff,
> + [PLL_OFF_TEST_CTL] = 0x30,
> + [PLL_OFF_TEST_CTL_U] = 0x34,
> + [PLL_OFF_STATUS] = 0x28,
> + },
> };
> EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
>
> +static unsigned long
> +alpha_pll_round_rate(unsigned long rate, unsigned long prate, u32 *l, u64 *a,
> + u32 alpha_width);
> /*
> * Even though 40 bits are present, use only 32 for ease of calculation.
> */
> @@ -215,6 +230,8 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
> #define ALPHA_BITWIDTH 32U
> #define ALPHA_SHIFT(w) min(w, ALPHA_BITWIDTH)
>
> +#define ALPHA_PLL_STATUS_REG_SHIFT 8
> +
> #define PLL_HUAYRA_M_WIDTH 8
> #define PLL_HUAYRA_M_SHIFT 8
> #define PLL_HUAYRA_M_MASK 0xff
> @@ -325,7 +342,7 @@ static void clk_alpha_pll_write_config(struct regmap *regmap, unsigned int reg,
> void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> const struct alpha_pll_config *config)
> {
> - u32 val, mask;
> + u32 val, val_u, mask, mask_u;
>
> regmap_write(regmap, PLL_L_VAL(pll), config->l);
> regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
> @@ -355,14 +372,85 @@ void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> mask |= config->pre_div_mask;
> mask |= config->post_div_mask;
> mask |= config->vco_mask;
> + mask |= config->alpha_en_mask;
> + mask |= config->alpha_mode_mask;
>
> regmap_update_bits(regmap, PLL_USER_CTL(pll), mask, val);
>
> + /* Stromer APSS PLL does not enable LOCK_DET by default, so enable it */
> + val_u = config->status_reg_val << ALPHA_PLL_STATUS_REG_SHIFT;
> + val_u |= config->lock_det;
> +
> + mask_u = config->status_reg_mask;
> + mask_u |= config->lock_det;
> +
> + if (val_u)
> + regmap_update_bits(regmap, PLL_USER_CTL_U(pll), mask_u, val_u);
> +
> + if (config->test_ctl_val)
> + regmap_write(regmap, PLL_TEST_CTL(pll), config->test_ctl_val);
> +
> + if (config->test_ctl_hi_val)
> + regmap_write(regmap, PLL_TEST_CTL_U(pll), config->test_ctl_hi_val);
> +
> if (pll->flags & SUPPORTS_FSM_MODE)
> qcom_pll_set_fsm_mode(regmap, PLL_MODE(pll), 6, 0);
> }
> EXPORT_SYMBOL_GPL(clk_alpha_pll_configure);
>
> +static int clk_alpha_pll_stromer_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + u32 l;
> + u64 a;
> +
> + req->rate = alpha_pll_round_rate(req->rate, req->best_parent_rate,
> + &l, &a, ALPHA_REG_BITWIDTH);
> +
> + return 0;
> +}
> +
> +static int clk_alpha_pll_stromer_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long prate)
> +{
> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> + u32 l;
> + int ret;
> + u64 a;
> +
> + rate = alpha_pll_round_rate(rate, prate, &l, &a, ALPHA_REG_BITWIDTH);
> +
> + regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
> + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
> + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll),
> + a >> ALPHA_BITWIDTH);
> +
> + regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
> + PLL_ALPHA_EN, PLL_ALPHA_EN);
> +
> + if (!clk_hw_is_enabled(hw))
> + return 0;
> +
> + /*
> + * Stromer PLL supports Dynamic programming.
> + * It allows the PLL frequency to be changed on-the-fly without first
> + * execution of a shutdown procedure followed by a bring up procedure.
> + */
> +
> + regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_UPDATE,
> + PLL_UPDATE);
> +
> + ret = wait_for_pll_update(pll);
> + if (ret)
> + return ret;
> +
> + ret = wait_for_pll_enable_lock(pll);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> static int clk_alpha_pll_hwfsm_enable(struct clk_hw *hw)
> {
> int ret;
> @@ -1013,6 +1101,16 @@ const struct clk_ops clk_alpha_pll_hwfsm_ops = {
> };
> EXPORT_SYMBOL_GPL(clk_alpha_pll_hwfsm_ops);
>
> +const struct clk_ops clk_alpha_pll_stromer_ops = {
> + .enable = clk_alpha_pll_enable,
> + .disable = clk_alpha_pll_disable,
> + .is_enabled = clk_alpha_pll_is_enabled,
> + .recalc_rate = clk_alpha_pll_recalc_rate,
> + .determine_rate = clk_alpha_pll_stromer_determine_rate,
> + .set_rate = clk_alpha_pll_stromer_set_rate,
> +};
> +EXPORT_SYMBOL_GPL(clk_alpha_pll_stromer_ops);
> +
> const struct clk_ops clk_alpha_pll_fixed_trion_ops = {
> .enable = clk_trion_pll_enable,
> .disable = clk_trion_pll_disable,
> diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
> index 2bdae362c827..1d122919e275 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.h
> +++ b/drivers/clk/qcom/clk-alpha-pll.h
> @@ -1,5 +1,5 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -/* Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved. */
> +/* Copyright (c) 2015, 2018, 2021 The Linux Foundation. All rights reserved. */
>
> #ifndef __QCOM_CLK_ALPHA_PLL_H__
> #define __QCOM_CLK_ALPHA_PLL_H__
> @@ -22,6 +22,7 @@ enum {
> CLK_ALPHA_PLL_TYPE_RIVIAN_EVO,
> CLK_ALPHA_PLL_TYPE_DEFAULT_EVO,
> CLK_ALPHA_PLL_TYPE_BRAMMO_EVO,
> + CLK_ALPHA_PLL_TYPE_STROMER,
> CLK_ALPHA_PLL_TYPE_MAX,
> };
>
> @@ -131,6 +132,9 @@ struct alpha_pll_config {
> u32 post_div_mask;
> u32 vco_val;
> u32 vco_mask;
> + u32 status_reg_val;
> + u32 status_reg_mask;
> + u32 lock_det;
> };
>
> extern const struct clk_ops clk_alpha_pll_ops;
> @@ -139,6 +143,7 @@ extern const struct clk_ops clk_alpha_pll_hwfsm_ops;
> extern const struct clk_ops clk_alpha_pll_postdiv_ops;
> extern const struct clk_ops clk_alpha_pll_huayra_ops;
> extern const struct clk_ops clk_alpha_pll_postdiv_ro_ops;
> +extern const struct clk_ops clk_alpha_pll_stromer_ops;
>
> extern const struct clk_ops clk_alpha_pll_fabia_ops;
> extern const struct clk_ops clk_alpha_pll_fixed_fabia_ops;
Quoting Kathiravan T (2022-12-27 05:25:07)
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index f9e4cfd7261c..29866100df08 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -204,9 +204,24 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
> [PLL_OFF_CONFIG_CTL] = 0x1C,
> [PLL_OFF_STATUS] = 0x20,
> },
> + [CLK_ALPHA_PLL_TYPE_STROMER] = {
> + [PLL_OFF_L_VAL] = 0x08,
> + [PLL_OFF_ALPHA_VAL] = 0x10,
> + [PLL_OFF_ALPHA_VAL_U] = 0x14,
> + [PLL_OFF_USER_CTL] = 0x18,
> + [PLL_OFF_USER_CTL_U] = 0x1c,
> + [PLL_OFF_CONFIG_CTL] = 0x20,
> + [PLL_OFF_CONFIG_CTL_U] = 0xff,
> + [PLL_OFF_TEST_CTL] = 0x30,
> + [PLL_OFF_TEST_CTL_U] = 0x34,
> + [PLL_OFF_STATUS] = 0x28,
> + },
> };
> EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
>
> +static unsigned long
> +alpha_pll_round_rate(unsigned long rate, unsigned long prate, u32 *l, u64 *a,
Is this necessary?
> + u32 alpha_width);
> /*
> * Even though 40 bits are present, use only 32 for ease of calculation.
> */
> @@ -215,6 +230,8 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
> #define ALPHA_BITWIDTH 32U
> #define ALPHA_SHIFT(w) min(w, ALPHA_BITWIDTH)
>
> +#define ALPHA_PLL_STATUS_REG_SHIFT 8
> +
> #define PLL_HUAYRA_M_WIDTH 8
> #define PLL_HUAYRA_M_SHIFT 8
> #define PLL_HUAYRA_M_MASK 0xff
> @@ -325,7 +342,7 @@ static void clk_alpha_pll_write_config(struct regmap *regmap, unsigned int reg,
> void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> const struct alpha_pll_config *config)
> {
> - u32 val, mask;
> + u32 val, val_u, mask, mask_u;
>
> regmap_write(regmap, PLL_L_VAL(pll), config->l);
> regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
> @@ -355,14 +372,85 @@ void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> mask |= config->pre_div_mask;
> mask |= config->post_div_mask;
> mask |= config->vco_mask;
> + mask |= config->alpha_en_mask;
> + mask |= config->alpha_mode_mask;
>
> regmap_update_bits(regmap, PLL_USER_CTL(pll), mask, val);
>
> + /* Stromer APSS PLL does not enable LOCK_DET by default, so enable it */
Instead of adding these things to clk_alpha_pll_configure() can you
introduce another api like clk_stromer_pll_configure() that sets these
values unconditionally? That way we don't have to think or worry about
the other alpha PLLs (of which there are many).
> + val_u = config->status_reg_val << ALPHA_PLL_STATUS_REG_SHIFT;
> + val_u |= config->lock_det;
> +
> + mask_u = config->status_reg_mask;
> + mask_u |= config->lock_det;
> +
> + if (val_u)
> + regmap_update_bits(regmap, PLL_USER_CTL_U(pll), mask_u, val_u);
> +
> + if (config->test_ctl_val)
> + regmap_write(regmap, PLL_TEST_CTL(pll), config->test_ctl_val);
> +
> + if (config->test_ctl_hi_val)
> + regmap_write(regmap, PLL_TEST_CTL_U(pll), config->test_ctl_hi_val);
> +
> if (pll->flags & SUPPORTS_FSM_MODE)
> qcom_pll_set_fsm_mode(regmap, PLL_MODE(pll), 6, 0);
> }
> EXPORT_SYMBOL_GPL(clk_alpha_pll_configure);
>
> +static int clk_alpha_pll_stromer_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + u32 l;
> + u64 a;
> +
> + req->rate = alpha_pll_round_rate(req->rate, req->best_parent_rate,
> + &l, &a, ALPHA_REG_BITWIDTH);
> +
> + return 0;
> +}
> +
> +static int clk_alpha_pll_stromer_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long prate)
> +{
> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> + u32 l;
> + int ret;
> + u64 a;
> +
> + rate = alpha_pll_round_rate(rate, prate, &l, &a, ALPHA_REG_BITWIDTH);
> +
> + regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
> + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
> + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll),
> + a >> ALPHA_BITWIDTH);
> +
> + regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
> + PLL_ALPHA_EN, PLL_ALPHA_EN);
> +
> + if (!clk_hw_is_enabled(hw))
> + return 0;
> +
> + /*
> + * Stromer PLL supports Dynamic programming.
> + * It allows the PLL frequency to be changed on-the-fly without first
> + * execution of a shutdown procedure followed by a bring up procedure.
> + */
> +
Drop newline above please.
> + regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_UPDATE,
> + PLL_UPDATE);
> +
> + ret = wait_for_pll_update(pll);
> + if (ret)
> + return ret;
> +
> + ret = wait_for_pll_enable_lock(pll);
> + if (ret)
> + return ret;
> +
> + return 0;
Just use
return wait_for_pll_enable_lock(pll);
> +}
> +
> static int clk_alpha_pll_hwfsm_enable(struct clk_hw *hw)
> {
> int ret;
> @@ -1013,6 +1101,16 @@ const struct clk_ops clk_alpha_pll_hwfsm_ops = {
> };
> EXPORT_SYMBOL_GPL(clk_alpha_pll_hwfsm_ops);
>
> +const struct clk_ops clk_alpha_pll_stromer_ops = {
> + .enable = clk_alpha_pll_enable,
> + .disable = clk_alpha_pll_disable,
> + .is_enabled = clk_alpha_pll_is_enabled,
> + .recalc_rate = clk_alpha_pll_recalc_rate,
> + .determine_rate = clk_alpha_pll_stromer_determine_rate,
> + .set_rate = clk_alpha_pll_stromer_set_rate,
> +};
> +EXPORT_SYMBOL_GPL(clk_alpha_pll_stromer_ops);
> +
> const struct clk_ops clk_alpha_pll_fixed_trion_ops = {
> .enable = clk_trion_pll_enable,
> .disable = clk_trion_pll_disable,
> diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
> index 2bdae362c827..1d122919e275 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.h
> +++ b/drivers/clk/qcom/clk-alpha-pll.h
> @@ -1,5 +1,5 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -/* Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved. */
> +/* Copyright (c) 2015, 2018, 2021 The Linux Foundation. All rights reserved. */
2022 or 2023?
Hi Stephen,
Thanks for taking time to review the patch.
On 1/13/2023 5:23 AM, Stephen Boyd wrote:
> Quoting Kathiravan T (2022-12-27 05:25:07)
>> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
>> index f9e4cfd7261c..29866100df08 100644
>> --- a/drivers/clk/qcom/clk-alpha-pll.c
>> +++ b/drivers/clk/qcom/clk-alpha-pll.c
>> @@ -204,9 +204,24 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
>> [PLL_OFF_CONFIG_CTL] = 0x1C,
>> [PLL_OFF_STATUS] = 0x20,
>> },
>> + [CLK_ALPHA_PLL_TYPE_STROMER] = {
>> + [PLL_OFF_L_VAL] = 0x08,
>> + [PLL_OFF_ALPHA_VAL] = 0x10,
>> + [PLL_OFF_ALPHA_VAL_U] = 0x14,
>> + [PLL_OFF_USER_CTL] = 0x18,
>> + [PLL_OFF_USER_CTL_U] = 0x1c,
>> + [PLL_OFF_CONFIG_CTL] = 0x20,
>> + [PLL_OFF_CONFIG_CTL_U] = 0xff,
>> + [PLL_OFF_TEST_CTL] = 0x30,
>> + [PLL_OFF_TEST_CTL_U] = 0x34,
>> + [PLL_OFF_STATUS] = 0x28,
>> + },
>> };
>> EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
>>
>> +static unsigned long
>> +alpha_pll_round_rate(unsigned long rate, unsigned long prate, u32 *l, u64 *a,
> Is this necessary?
Not really, will re-arrange the functions and drop this.
>
>> + u32 alpha_width);
>> /*
>> * Even though 40 bits are present, use only 32 for ease of calculation.
>> */
>> @@ -215,6 +230,8 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
>> #define ALPHA_BITWIDTH 32U
>> #define ALPHA_SHIFT(w) min(w, ALPHA_BITWIDTH)
>>
>> +#define ALPHA_PLL_STATUS_REG_SHIFT 8
>> +
>> #define PLL_HUAYRA_M_WIDTH 8
>> #define PLL_HUAYRA_M_SHIFT 8
>> #define PLL_HUAYRA_M_MASK 0xff
>> @@ -325,7 +342,7 @@ static void clk_alpha_pll_write_config(struct regmap *regmap, unsigned int reg,
>> void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>> const struct alpha_pll_config *config)
>> {
>> - u32 val, mask;
>> + u32 val, val_u, mask, mask_u;
>>
>> regmap_write(regmap, PLL_L_VAL(pll), config->l);
>> regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
>> @@ -355,14 +372,85 @@ void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>> mask |= config->pre_div_mask;
>> mask |= config->post_div_mask;
>> mask |= config->vco_mask;
>> + mask |= config->alpha_en_mask;
>> + mask |= config->alpha_mode_mask;
>>
>> regmap_update_bits(regmap, PLL_USER_CTL(pll), mask, val);
>>
>> + /* Stromer APSS PLL does not enable LOCK_DET by default, so enable it */
> Instead of adding these things to clk_alpha_pll_configure() can you
> introduce another api like clk_stromer_pll_configure() that sets these
> values unconditionally? That way we don't have to think or worry about
> the other alpha PLLs (of which there are many).
Sure, will introduce the new API.
>
>> + val_u = config->status_reg_val << ALPHA_PLL_STATUS_REG_SHIFT;
>> + val_u |= config->lock_det;
>> +
>> + mask_u = config->status_reg_mask;
>> + mask_u |= config->lock_det;
>> +
>> + if (val_u)
>> + regmap_update_bits(regmap, PLL_USER_CTL_U(pll), mask_u, val_u);
>> +
>> + if (config->test_ctl_val)
>> + regmap_write(regmap, PLL_TEST_CTL(pll), config->test_ctl_val);
>> +
>> + if (config->test_ctl_hi_val)
>> + regmap_write(regmap, PLL_TEST_CTL_U(pll), config->test_ctl_hi_val);
>> +
>> if (pll->flags & SUPPORTS_FSM_MODE)
>> qcom_pll_set_fsm_mode(regmap, PLL_MODE(pll), 6, 0);
>> }
>> EXPORT_SYMBOL_GPL(clk_alpha_pll_configure);
>>
>> +static int clk_alpha_pll_stromer_determine_rate(struct clk_hw *hw,
>> + struct clk_rate_request *req)
>> +{
>> + u32 l;
>> + u64 a;
>> +
>> + req->rate = alpha_pll_round_rate(req->rate, req->best_parent_rate,
>> + &l, &a, ALPHA_REG_BITWIDTH);
>> +
>> + return 0;
>> +}
>> +
>> +static int clk_alpha_pll_stromer_set_rate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long prate)
>> +{
>> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>> + u32 l;
>> + int ret;
>> + u64 a;
>> +
>> + rate = alpha_pll_round_rate(rate, prate, &l, &a, ALPHA_REG_BITWIDTH);
>> +
>> + regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
>> + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
>> + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll),
>> + a >> ALPHA_BITWIDTH);
>> +
>> + regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
>> + PLL_ALPHA_EN, PLL_ALPHA_EN);
>> +
>> + if (!clk_hw_is_enabled(hw))
>> + return 0;
>> +
>> + /*
>> + * Stromer PLL supports Dynamic programming.
>> + * It allows the PLL frequency to be changed on-the-fly without first
>> + * execution of a shutdown procedure followed by a bring up procedure.
>> + */
>> +
> Drop newline above please.
Ack.
>
>> + regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_UPDATE,
>> + PLL_UPDATE);
>> +
>> + ret = wait_for_pll_update(pll);
>> + if (ret)
>> + return ret;
>> +
>> + ret = wait_for_pll_enable_lock(pll);
>> + if (ret)
>> + return ret;
>> +
>> + return 0;
> Just use
>
> return wait_for_pll_enable_lock(pll);
Ack.
>
>> +}
>> +
>> static int clk_alpha_pll_hwfsm_enable(struct clk_hw *hw)
>> {
>> int ret;
>> @@ -1013,6 +1101,16 @@ const struct clk_ops clk_alpha_pll_hwfsm_ops = {
>> };
>> EXPORT_SYMBOL_GPL(clk_alpha_pll_hwfsm_ops);
>>
>> +const struct clk_ops clk_alpha_pll_stromer_ops = {
>> + .enable = clk_alpha_pll_enable,
>> + .disable = clk_alpha_pll_disable,
>> + .is_enabled = clk_alpha_pll_is_enabled,
>> + .recalc_rate = clk_alpha_pll_recalc_rate,
>> + .determine_rate = clk_alpha_pll_stromer_determine_rate,
>> + .set_rate = clk_alpha_pll_stromer_set_rate,
>> +};
>> +EXPORT_SYMBOL_GPL(clk_alpha_pll_stromer_ops);
>> +
>> const struct clk_ops clk_alpha_pll_fixed_trion_ops = {
>> .enable = clk_trion_pll_enable,
>> .disable = clk_trion_pll_disable,
>> diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
>> index 2bdae362c827..1d122919e275 100644
>> --- a/drivers/clk/qcom/clk-alpha-pll.h
>> +++ b/drivers/clk/qcom/clk-alpha-pll.h
>> @@ -1,5 +1,5 @@
>> /* SPDX-License-Identifier: GPL-2.0 */
>> -/* Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved. */
>> +/* Copyright (c) 2015, 2018, 2021 The Linux Foundation. All rights reserved. */
> 2022 or 2023?
Will make it as 2023.
I'm on vacation next week. I will post the V5 once I'm back.
Thanks,
Kathiravan T.