It is best practice to have 1 binding per file, so board level bindings
should be separate for various misc SoC bindings.
Cc: Mark Rutland <[email protected]>
Cc: Carlo Caione <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
---
It seems this one fell thru the cracks and didn't get applied.
.../devicetree/bindings/arm/amlogic.txt | 29 -------------------
.../amlogic/amlogic,meson-gx-ao-secure.txt | 28 ++++++++++++++++++
2 files changed, 28 insertions(+), 29 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 061f7b98a07f..5f650248b18e 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -111,32 +111,3 @@ Board compatible values (alphabetically, grouped by SoC):
- "amlogic,u200" (Meson g12a s905d2)
- "amediatech,x96-max" (Meson g12a s905x2)
- "seirobotics,sei510" (Meson g12a s905x2)
-
-Amlogic Meson Firmware registers Interface
-------------------------------------------
-
-The Meson SoCs have a register bank with status and data shared with the
-secure firmware.
-
-Required properties:
- - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
-
-Properties should indentify components of this register interface :
-
-Meson GX SoC Information
-------------------------
-A firmware register encodes the SoC type, package and revision information on
-the Meson GX SoCs.
-If present, the following property should be added :
-
-Optional properties:
- - amlogic,has-chip-id: If present, the interface gives the current SoC version.
-
-Example
--------
-
-ao-secure@140 {
- compatible = "amlogic,meson-gx-ao-secure", "syscon";
- reg = <0x0 0x140 0x0 0x140>;
- amlogic,has-chip-id;
-};
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
new file mode 100644
index 000000000000..c67d9f48fb91
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
@@ -0,0 +1,28 @@
+Amlogic Meson Firmware registers Interface
+------------------------------------------
+
+The Meson SoCs have a register bank with status and data shared with the
+secure firmware.
+
+Required properties:
+ - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
+
+Properties should indentify components of this register interface :
+
+Meson GX SoC Information
+------------------------
+A firmware register encodes the SoC type, package and revision information on
+the Meson GX SoCs.
+If present, the following property should be added :
+
+Optional properties:
+ - amlogic,has-chip-id: If present, the interface gives the current SoC version.
+
+Example
+-------
+
+ao-secure@140 {
+ compatible = "amlogic,meson-gx-ao-secure", "syscon";
+ reg = <0x0 0x140 0x0 0x140>;
+ amlogic,has-chip-id;
+};
--
2.20.1
Convert Amlogic SoC bindings to DT schema format using json-schema.
Cc: Carlo Caione <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
---
v3:
- Add board descriptions
- Rebase onto Linus' master
.../devicetree/bindings/arm/amlogic.txt | 113 --------------
.../devicetree/bindings/arm/amlogic.yaml | 140 ++++++++++++++++++
2 files changed, 140 insertions(+), 113 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/amlogic.txt
create mode 100644 Documentation/devicetree/bindings/arm/amlogic.yaml
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
deleted file mode 100644
index 5f650248b18e..000000000000
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ /dev/null
@@ -1,113 +0,0 @@
-Amlogic MesonX device tree bindings
--------------------------------------------
-
-Work in progress statement:
-
-Device tree files and bindings applying to Amlogic SoCs and boards are
-considered "unstable". Any Amlogic device tree binding may change at
-any time. Be sure to use a device tree binary and a kernel image
-generated from the same source tree.
-
-Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
-stable binding/ABI.
-
----------------------------------------------------------------
-
-Boards with the Amlogic Meson6 SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,meson6"
-
-Boards with the Amlogic Meson8 SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,meson8";
-
-Boards with the Amlogic Meson8b SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,meson8b";
-
-Boards with the Amlogic Meson8m2 SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,meson8m2";
-
-Boards with the Amlogic Meson GXBaby SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,meson-gxbb";
-
-Boards with the Amlogic Meson GXL S905X SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,s905x", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXL S905D SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,s905d", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXL S805X SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,s805x", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXL S905W SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,s905w", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXM S912 SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,s912", "amlogic,meson-gxm";
-
-Boards with the Amlogic Meson AXG A113D SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,a113d", "amlogic,meson-axg";
-
-Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,g12a";
-
-Board compatible values (alphabetically, grouped by SoC):
-
- - "geniatech,atv1200" (Meson6)
-
- - "minix,neo-x8" (Meson8)
-
- - "endless,ec100" (Meson8b)
- - "hardkernel,odroid-c1" (Meson8b)
- - "tronfy,mxq" (Meson8b)
-
- - "tronsmart,mxiii-plus" (Meson8m2)
-
- - "amlogic,p200" (Meson gxbb)
- - "amlogic,p201" (Meson gxbb)
- - "friendlyarm,nanopi-k2" (Meson gxbb)
- - "hardkernel,odroid-c2" (Meson gxbb)
- - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
- - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
- - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
- - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
- - "wetek,hub" (Meson gxbb)
- - "wetek,play2" (Meson gxbb)
-
- - "amlogic,p212" (Meson gxl s905x)
- - "hwacom,amazetv" (Meson gxl s905x)
- - "khadas,vim" (Meson gxl s905x)
- - "libretech,cc" (Meson gxl s905x)
-
- - "amlogic,p230" (Meson gxl s905d)
- - "amlogic,p231" (Meson gxl s905d)
- - "phicomm,n1" (Meson gxl s905d)
-
- - "amlogic,p241" (Meson gxl s805x)
- - "libretech,aml-s805x-ac" (Meson gxl s805x)
-
- - "amlogic,p281" (Meson gxl s905w)
- - "oranth,tx3-mini" (Meson gxl s905w)
-
- - "amlogic,q200" (Meson gxm s912)
- - "amlogic,q201" (Meson gxm s912)
- - "khadas,vim2" (Meson gxm s912)
- - "kingnovel,r-box-pro" (Meson gxm S912)
- - "nexbox,a1" (Meson gxm s912)
- - "tronsmart,vega-s96" (Meson gxm s912)
-
- - "amlogic,s400" (Meson axg a113d)
-
- - "amlogic,u200" (Meson g12a s905d2)
- - "amediatech,x96-max" (Meson g12a s905x2)
- - "seirobotics,sei510" (Meson g12a s905x2)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
new file mode 100644
index 000000000000..6d5bb493db03
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/amlogic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic MesonX device tree bindings
+
+maintainers:
+ - Neil Armstrong <[email protected]>
+ - Carlo Caione <[email protected]>
+ - Kevin Hilman <[email protected]>
+
+description: |+
+ Work in progress statement:
+
+ Device tree files and bindings applying to Amlogic SoCs and boards are
+ considered "unstable". Any Amlogic device tree binding may change at
+ any time. Be sure to use a device tree binary and a kernel image
+ generated from the same source tree.
+
+ Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
+ stable binding/ABI.
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: Boards with the Amlogic Meson6 SoC
+ items:
+ - enum:
+ - geniatech,atv1200
+ - const: amlogic,meson6
+
+ - description: Boards with the Amlogic Meson8 SoC
+ items:
+ - enum:
+ - minix,neo-x8
+ - const: amlogic,meson8
+
+ - description: Boards with the Amlogic Meson8m2 SoC
+ items:
+ - enum:
+ - tronsmart,mxiii-plus
+ - const: amlogic,meson8m2
+
+ - description: Boards with the Amlogic Meson8b SoC
+ items:
+ - enum:
+ - endless,ec100
+ - hardkernel,odroid-c1
+ - tronfy,mxq
+ - const: amlogic,meson8b
+
+ - description: Boards with the Amlogic Meson GXBaby SoC
+ items:
+ - enum:
+ - amlogic,p200
+ - amlogic,p201
+ - friendlyarm,nanopi-k2
+ - hardkernel,odroid-c2
+ - nexbox,a95x
+ - wetek,hub
+ - wetek,play2
+ - const: amlogic,meson-gxbb
+
+ - description: Tronsmart Vega S95 devices
+ items:
+ - enum:
+ - tronsmart,vega-s95-pro
+ - tronsmart,vega-s95-meta
+ - tronsmart,vega-s95-telos
+ - const: tronsmart,vega-s95
+ - const: amlogic,meson-gxbb
+
+ - description: Boards with the Amlogic Meson GXL S805X SoC
+ items:
+ - enum:
+ - amlogic,p241
+ - libretech,aml-s805x-ac
+ - const: amlogic,s805x
+ - const: amlogic,meson-gxl
+
+ - description: Boards with the Amlogic Meson GXL S905W SoC
+ items:
+ - enum:
+ - amlogic,p281
+ - oranth,tx3-mini
+ - const: amlogic,s905w
+ - const: amlogic,meson-gxl
+
+ - description: Boards with the Amlogic Meson GXL S905X SoC
+ items:
+ - enum:
+ - amediatech,x96-max
+ - amlogic,p212
+ - hwacom,amazetv
+ - khadas,vim
+ - libretech,cc
+ - nexbox,a95x
+ - seirobotics,sei510
+ - const: amlogic,s905x
+ - const: amlogic,meson-gxl
+
+ - description: Boards with the Amlogic Meson GXL S905D SoC
+ items:
+ - enum:
+ - amlogic,p230
+ - amlogic,p231
+ - phicomm,n1
+ - const: amlogic,s905d
+ - const: amlogic,meson-gxl
+
+ - description: Boards with the Amlogic Meson GXM S912 SoC
+ items:
+ - enum:
+ - amlogic,q200
+ - amlogic,q201
+ - khadas,vim2
+ - kingnovel,r-box-pro
+ - nexbox,a1
+ - tronsmart,vega-s96
+ - const: amlogic,s912
+ - const: amlogic,meson-gxm
+
+ - description: Boards with the Amlogic Meson AXG A113D SoC
+ items:
+ - enum:
+ - amlogic,s400
+ - const: amlogic,a113d
+ - const: amlogic,meson-axg
+
+ - description: Boards with the Amlogic Meson G12A S905D2 SoC
+ items:
+ - enum:
+ - amlogic,u200
+ - const: amlogic,g12a
+
+...
--
2.20.1
On 17/05/2019 17:27, Rob Herring wrote:
> It is best practice to have 1 binding per file, so board level bindings
> should be separate for various misc SoC bindings.
>
> Cc: Mark Rutland <[email protected]>
> Cc: Carlo Caione <[email protected]>
> Cc: Kevin Hilman <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> It seems this one fell thru the cracks and didn't get applied.
>
> .../devicetree/bindings/arm/amlogic.txt | 29 -------------------
> .../amlogic/amlogic,meson-gx-ao-secure.txt | 28 ++++++++++++++++++
> 2 files changed, 28 insertions(+), 29 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
> index 061f7b98a07f..5f650248b18e 100644
> --- a/Documentation/devicetree/bindings/arm/amlogic.txt
> +++ b/Documentation/devicetree/bindings/arm/amlogic.txt
> @@ -111,32 +111,3 @@ Board compatible values (alphabetically, grouped by SoC):
> - "amlogic,u200" (Meson g12a s905d2)
> - "amediatech,x96-max" (Meson g12a s905x2)
> - "seirobotics,sei510" (Meson g12a s905x2)
> -
> -Amlogic Meson Firmware registers Interface
> -------------------------------------------
> -
> -The Meson SoCs have a register bank with status and data shared with the
> -secure firmware.
> -
> -Required properties:
> - - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
> -
> -Properties should indentify components of this register interface :
> -
> -Meson GX SoC Information
> -------------------------
> -A firmware register encodes the SoC type, package and revision information on
> -the Meson GX SoCs.
> -If present, the following property should be added :
> -
> -Optional properties:
> - - amlogic,has-chip-id: If present, the interface gives the current SoC version.
> -
> -Example
> --------
> -
> -ao-secure@140 {
> - compatible = "amlogic,meson-gx-ao-secure", "syscon";
> - reg = <0x0 0x140 0x0 0x140>;
> - amlogic,has-chip-id;
> -};
> diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
> new file mode 100644
> index 000000000000..c67d9f48fb91
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
> @@ -0,0 +1,28 @@
> +Amlogic Meson Firmware registers Interface
> +------------------------------------------
> +
> +The Meson SoCs have a register bank with status and data shared with the
> +secure firmware.
> +
> +Required properties:
> + - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
> +
> +Properties should indentify components of this register interface :
> +
> +Meson GX SoC Information
> +------------------------
> +A firmware register encodes the SoC type, package and revision information on
> +the Meson GX SoCs.
> +If present, the following property should be added :
> +
> +Optional properties:
> + - amlogic,has-chip-id: If present, the interface gives the current SoC version.
> +
> +Example
> +-------
> +
> +ao-secure@140 {
> + compatible = "amlogic,meson-gx-ao-secure", "syscon";
> + reg = <0x0 0x140 0x0 0x140>;
> + amlogic,has-chip-id;
> +};
Acked-by: Neil Armstrong <[email protected]>
On 17/05/2019 17:27, Rob Herring wrote:
> Convert Amlogic SoC bindings to DT schema format using json-schema.
>
> Cc: Carlo Caione <[email protected]>
> Cc: Kevin Hilman <[email protected]>
> Cc: Mark Rutland <[email protected]>
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> v3:
> - Add board descriptions
> - Rebase onto Linus' master
>
> .../devicetree/bindings/arm/amlogic.txt | 113 --------------
> .../devicetree/bindings/arm/amlogic.yaml | 140 ++++++++++++++++++
> 2 files changed, 140 insertions(+), 113 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/arm/amlogic.txt
> create mode 100644 Documentation/devicetree/bindings/arm/amlogic.yaml
>
> diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
> deleted file mode 100644
> index 5f650248b18e..000000000000
> --- a/Documentation/devicetree/bindings/arm/amlogic.txt
> +++ /dev/null
> @@ -1,113 +0,0 @@
> -Amlogic MesonX device tree bindings
> --------------------------------------------
> -
> -Work in progress statement:
> -
> -Device tree files and bindings applying to Amlogic SoCs and boards are
> -considered "unstable". Any Amlogic device tree binding may change at
> -any time. Be sure to use a device tree binary and a kernel image
> -generated from the same source tree.
> -
> -Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
> -stable binding/ABI.
> -
> ----------------------------------------------------------------
> -
> -Boards with the Amlogic Meson6 SoC shall have the following properties:
> - Required root node property:
> - compatible: "amlogic,meson6"
> -
> -Boards with the Amlogic Meson8 SoC shall have the following properties:
> - Required root node property:
> - compatible: "amlogic,meson8";
> -
> -Boards with the Amlogic Meson8b SoC shall have the following properties:
> - Required root node property:
> - compatible: "amlogic,meson8b";
> -
> -Boards with the Amlogic Meson8m2 SoC shall have the following properties:
> - Required root node property:
> - compatible: "amlogic,meson8m2";
> -
> -Boards with the Amlogic Meson GXBaby SoC shall have the following properties:
> - Required root node property:
> - compatible: "amlogic,meson-gxbb";
> -
> -Boards with the Amlogic Meson GXL S905X SoC shall have the following properties:
> - Required root node property:
> - compatible: "amlogic,s905x", "amlogic,meson-gxl";
> -
> -Boards with the Amlogic Meson GXL S905D SoC shall have the following properties:
> - Required root node property:
> - compatible: "amlogic,s905d", "amlogic,meson-gxl";
> -
> -Boards with the Amlogic Meson GXL S805X SoC shall have the following properties:
> - Required root node property:
> - compatible: "amlogic,s805x", "amlogic,meson-gxl";
> -
> -Boards with the Amlogic Meson GXL S905W SoC shall have the following properties:
> - Required root node property:
> - compatible: "amlogic,s905w", "amlogic,meson-gxl";
> -
> -Boards with the Amlogic Meson GXM S912 SoC shall have the following properties:
> - Required root node property:
> - compatible: "amlogic,s912", "amlogic,meson-gxm";
> -
> -Boards with the Amlogic Meson AXG A113D SoC shall have the following properties:
> - Required root node property:
> - compatible: "amlogic,a113d", "amlogic,meson-axg";
> -
> -Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties:
> - Required root node property:
> - compatible: "amlogic,g12a";
> -
> -Board compatible values (alphabetically, grouped by SoC):
> -
> - - "geniatech,atv1200" (Meson6)
> -
> - - "minix,neo-x8" (Meson8)
> -
> - - "endless,ec100" (Meson8b)
> - - "hardkernel,odroid-c1" (Meson8b)
> - - "tronfy,mxq" (Meson8b)
> -
> - - "tronsmart,mxiii-plus" (Meson8m2)
> -
> - - "amlogic,p200" (Meson gxbb)
> - - "amlogic,p201" (Meson gxbb)
> - - "friendlyarm,nanopi-k2" (Meson gxbb)
> - - "hardkernel,odroid-c2" (Meson gxbb)
> - - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
> - - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
> - - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
> - - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
> - - "wetek,hub" (Meson gxbb)
> - - "wetek,play2" (Meson gxbb)
> -
> - - "amlogic,p212" (Meson gxl s905x)
> - - "hwacom,amazetv" (Meson gxl s905x)
> - - "khadas,vim" (Meson gxl s905x)
> - - "libretech,cc" (Meson gxl s905x)
> -
> - - "amlogic,p230" (Meson gxl s905d)
> - - "amlogic,p231" (Meson gxl s905d)
> - - "phicomm,n1" (Meson gxl s905d)
> -
> - - "amlogic,p241" (Meson gxl s805x)
> - - "libretech,aml-s805x-ac" (Meson gxl s805x)
> -
> - - "amlogic,p281" (Meson gxl s905w)
> - - "oranth,tx3-mini" (Meson gxl s905w)
> -
> - - "amlogic,q200" (Meson gxm s912)
> - - "amlogic,q201" (Meson gxm s912)
> - - "khadas,vim2" (Meson gxm s912)
> - - "kingnovel,r-box-pro" (Meson gxm S912)
> - - "nexbox,a1" (Meson gxm s912)
> - - "tronsmart,vega-s96" (Meson gxm s912)
> -
> - - "amlogic,s400" (Meson axg a113d)
> -
> - - "amlogic,u200" (Meson g12a s905d2)
> - - "amediatech,x96-max" (Meson g12a s905x2)
> - - "seirobotics,sei510" (Meson g12a s905x2)
> diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
> new file mode 100644
> index 000000000000..6d5bb493db03
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
> @@ -0,0 +1,140 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/amlogic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic MesonX device tree bindings
> +
> +maintainers:
> + - Neil Armstrong <[email protected]>
> + - Carlo Caione <[email protected]>
> + - Kevin Hilman <[email protected]>
Please drop Carlo and me.
> +
> +description: |+
> + Work in progress statement:
> +
> + Device tree files and bindings applying to Amlogic SoCs and boards are
> + considered "unstable". Any Amlogic device tree binding may change at
> + any time. Be sure to use a device tree binary and a kernel image
> + generated from the same source tree.
> +
> + Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
> + stable binding/ABI.
> +
> +properties:
> + $nodename:
> + const: '/'
> + compatible:
> + oneOf:
> + - description: Boards with the Amlogic Meson6 SoC
> + items:
> + - enum:
> + - geniatech,atv1200
> + - const: amlogic,meson6
> +
> + - description: Boards with the Amlogic Meson8 SoC
> + items:
> + - enum:
> + - minix,neo-x8
> + - const: amlogic,meson8
> +
> + - description: Boards with the Amlogic Meson8m2 SoC
> + items:
> + - enum:
> + - tronsmart,mxiii-plus
> + - const: amlogic,meson8m2
> +
> + - description: Boards with the Amlogic Meson8b SoC
> + items:
> + - enum:
> + - endless,ec100
> + - hardkernel,odroid-c1
> + - tronfy,mxq
> + - const: amlogic,meson8b
> +
> + - description: Boards with the Amlogic Meson GXBaby SoC
> + items:
> + - enum:
> + - amlogic,p200
> + - amlogic,p201
> + - friendlyarm,nanopi-k2
> + - hardkernel,odroid-c2
> + - nexbox,a95x
> + - wetek,hub
> + - wetek,play2
> + - const: amlogic,meson-gxbb
> +
> + - description: Tronsmart Vega S95 devices
> + items:
> + - enum:
> + - tronsmart,vega-s95-pro
> + - tronsmart,vega-s95-meta
> + - tronsmart,vega-s95-telos
> + - const: tronsmart,vega-s95
> + - const: amlogic,meson-gxbb
> +
> + - description: Boards with the Amlogic Meson GXL S805X SoC
> + items:
> + - enum:
> + - amlogic,p241
> + - libretech,aml-s805x-ac
> + - const: amlogic,s805x
> + - const: amlogic,meson-gxl
> +
> + - description: Boards with the Amlogic Meson GXL S905W SoC
> + items:
> + - enum:
> + - amlogic,p281
> + - oranth,tx3-mini
> + - const: amlogic,s905w
> + - const: amlogic,meson-gxl
> +
> + - description: Boards with the Amlogic Meson GXL S905X SoC
> + items:
> + - enum:
> + - amediatech,x96-max
> + - amlogic,p212
> + - hwacom,amazetv
> + - khadas,vim
> + - libretech,cc
> + - nexbox,a95x
> + - seirobotics,sei510
> + - const: amlogic,s905x
> + - const: amlogic,meson-gxl
> +
> + - description: Boards with the Amlogic Meson GXL S905D SoC
> + items:
> + - enum:
> + - amlogic,p230
> + - amlogic,p231
> + - phicomm,n1
> + - const: amlogic,s905d
> + - const: amlogic,meson-gxl
> +
> + - description: Boards with the Amlogic Meson GXM S912 SoC
> + items:
> + - enum:
> + - amlogic,q200
> + - amlogic,q201
> + - khadas,vim2
> + - kingnovel,r-box-pro
> + - nexbox,a1
> + - tronsmart,vega-s96
> + - const: amlogic,s912
> + - const: amlogic,meson-gxm
> +
> + - description: Boards with the Amlogic Meson AXG A113D SoC
> + items:
> + - enum:
> + - amlogic,s400
> + - const: amlogic,a113d
> + - const: amlogic,meson-axg
> +
> + - description: Boards with the Amlogic Meson G12A S905D2 SoC
> + items:
> + - enum:
> + - amlogic,u200
> + - const: amlogic,g12a
> +
> +...
>
Otherwise looks fine.
With carlo and me removed from the maintainers :
Reviewed-by: Neil Armstrong <[email protected]>
Neil
Rob Herring <[email protected]> writes:
> It is best practice to have 1 binding per file, so board level bindings
> should be separate for various misc SoC bindings.
>
> Cc: Mark Rutland <[email protected]>
> Cc: Carlo Caione <[email protected]>
> Cc: Kevin Hilman <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> It seems this one fell thru the cracks and didn't get applied.
Feel free to apply directly.
Acked-by: Kevin Hilman <[email protected]>
Kevin Hilman <[email protected]> writes:
> Rob Herring <[email protected]> writes:
>
>> It is best practice to have 1 binding per file, so board level bindings
>> should be separate for various misc SoC bindings.
>>
>> Cc: Mark Rutland <[email protected]>
>> Cc: Carlo Caione <[email protected]>
>> Cc: Kevin Hilman <[email protected]>
>> Cc: [email protected]
>> Cc: [email protected]
>> Cc: [email protected]
>> Signed-off-by: Rob Herring <[email protected]>
>> ---
>> It seems this one fell thru the cracks and didn't get applied.
>
> Feel free to apply directly.
>
> Acked-by: Kevin Hilman <[email protected]>
On second that, we're going to have dependencies on that for the v5.3
cycle, so I'll queue these up.
Kevin