From: Guan Xuetao <[email protected]>
Patch 9 implements timer and time. RTC and PWM device drivers are also here.
Signed-off-by: Guan Xuetao <[email protected]>
---
arch/unicore32/include/asm/timex.h | 34 +++
arch/unicore32/kernel/time.c | 157 +++++++++++++++
drivers/staging/puv3/puv3_pwm.c | 271 +++++++++++++++++++++++++
drivers/staging/puv3/puv3_rtc.c | 388 ++++++++++++++++++++++++++++++++++++
4 files changed, 850 insertions(+), 0 deletions(-)
diff --git a/arch/unicore32/include/asm/timex.h b/arch/unicore32/include/asm/timex.h
new file mode 100644
index 0000000..faf16ba
--- /dev/null
+++ b/arch/unicore32/include/asm/timex.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/unicore32/include/asm/timex.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_TIMEX_H__
+#define __UNICORE_TIMEX_H__
+
+#ifdef CONFIG_ARCH_FPGA
+
+/* in FPGA, APB clock is 33M, and OST clock is 32K, */
+/* so, 1M is selected for timer interrupt correctly */
+#define CLOCK_TICK_RATE (32*1024)
+
+#endif
+
+#if defined(CONFIG_PUV3_DB0913) \
+ || defined(CONFIG_PUV3_NB0916) \
+ || defined(CONFIG_PUV3_SMW0919)
+
+#define CLOCK_TICK_RATE (14318000)
+
+#endif
+
+#include <asm-generic/timex.h>
+
+#endif
diff --git a/arch/unicore32/kernel/time.c b/arch/unicore32/kernel/time.c
new file mode 100644
index 0000000..ed9cabf
--- /dev/null
+++ b/arch/unicore32/kernel/time.c
@@ -0,0 +1,157 @@
+/*
+ * linux/arch/unicore32/mach-puv3/time.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <[email protected]>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Contributors & Additions/Fixes:
+ * 2002-2009: First version by GUAN Xue-tao
+ *
+ * TODO:
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/timex.h>
+#include <linux/clockchips.h>
+
+#include <asm/mach/hardware.h>
+
+#define MIN_OSCR_DELTA 2
+
+static irqreturn_t puv3_ost0_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *c = dev_id;
+
+ /* Disarm the compare/match, signal the event. */
+ OST_OIER &= ~OST_OIER_E0;
+ OST_OSSR &= ~OST_OSSR_M0;
+ c->event_handler(c);
+
+ return IRQ_HANDLED;
+}
+
+static int
+puv3_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
+{
+ unsigned long next, oscr;
+
+ OST_OIER |= OST_OIER_E0;
+ next = OST_OSCR + delta;
+ OST_OSMR0 = next;
+ oscr = OST_OSCR;
+
+ return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
+}
+
+static void
+puv3_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ OST_OIER &= ~OST_OIER_E0;
+ OST_OSSR &= ~OST_OSSR_M0;
+ break;
+
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ }
+}
+
+static struct clock_event_device ckevt_puv3_osmr0 = {
+ .name = "osmr0",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+#ifdef CONFIG_ARCH_FPGA
+ .shift = 18, /* correct shift val: 16, but warn_on_slowpath */
+#else
+ .shift = 30,
+#endif
+ .rating = 200,
+ .set_next_event = puv3_osmr0_set_next_event,
+ .set_mode = puv3_osmr0_set_mode,
+};
+
+static cycle_t puv3_read_oscr(struct clocksource *cs)
+{
+ return OST_OSCR;
+}
+
+static struct clocksource cksrc_puv3_oscr = {
+ .name = "oscr",
+ .rating = 200,
+ .read = puv3_read_oscr,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 18,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct irqaction puv3_timer_irq = {
+ .name = "ost0",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = puv3_ost0_interrupt,
+ .dev_id = &ckevt_puv3_osmr0,
+};
+
+void __init time_init(void)
+{
+ OST_OIER = 0; /* disable any timer interrupts */
+ OST_OSSR = 0; /* clear status on all timers */
+
+ ckevt_puv3_osmr0.mult =
+ div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt_puv3_osmr0.shift);
+ ckevt_puv3_osmr0.max_delta_ns =
+ clockevent_delta2ns(0x7fffffff, &ckevt_puv3_osmr0);
+ ckevt_puv3_osmr0.min_delta_ns =
+ clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_puv3_osmr0) + 1;
+ ckevt_puv3_osmr0.cpumask = cpumask_of(0);
+
+ cksrc_puv3_oscr.mult =
+ clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_puv3_oscr.shift);
+
+ setup_irq(IRQ_TIMER0, &puv3_timer_irq);
+
+ clocksource_register(&cksrc_puv3_oscr);
+ clockevents_register_device(&ckevt_puv3_osmr0);
+}
+
+#ifdef CONFIG_PM
+unsigned long osmr[4], oier;
+
+void puv3_timer_suspend(void)
+{
+ osmr[0] = OST_OSMR0;
+ osmr[1] = OST_OSMR1;
+ osmr[2] = OST_OSMR2;
+ osmr[3] = OST_OSMR3;
+ oier = OST_OIER;
+}
+
+void puv3_timer_resume(void)
+{
+ OST_OSSR = 0;
+ OST_OSMR0 = osmr[0];
+ OST_OSMR1 = osmr[1];
+ OST_OSMR2 = osmr[2];
+ OST_OSMR3 = osmr[3];
+ OST_OIER = oier;
+
+ /*
+ * OSMR0 is the system timer: make sure OSCR is sufficiently behind
+ */
+ OST_OSCR = OST_OSMR0 - LATCH;
+}
+#else
+void puv3_timer_suspend(void) { };
+void puv3_timer_resume(void) { };
+#endif
+
diff --git a/drivers/staging/puv3/puv3_pwm.c b/drivers/staging/puv3/puv3_pwm.c
new file mode 100644
index 0000000..11bd761
--- /dev/null
+++ b/drivers/staging/puv3/puv3_pwm.c
@@ -0,0 +1,271 @@
+/*
+ * linux/drivers/pkunity/puv3/puv3_pwm.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <[email protected]>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on: arch/arm/plat-pxa/pwm.c
+ *
+ * Contributors & Additions/Fixes:
+ * 2009-06-23: add pwm support for nb0916 by ZHONG Qi
+ * 2009-05-31: add pwm drivers by GUAN Xue-tao
+ *
+ * TODO:
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+#include <asm/mach/hardware.h>
+
+struct pwm_device {
+ struct list_head node;
+ struct platform_device *pdev;
+
+ const char *label;
+ struct clk *clk;
+ int clk_enabled;
+
+ unsigned int use_count;
+ unsigned int pwm_id;
+};
+
+/*
+ * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
+ * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ */
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+ unsigned long long c;
+ unsigned long period_cycles, prescale, pv, dc;
+
+ if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+ return -EINVAL;
+
+ c = clk_get_rate(pwm->clk);
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ if (period_cycles < 1)
+ period_cycles = 1;
+ prescale = (period_cycles - 1) / 1024;
+ pv = period_cycles / (prescale + 1) - 1;
+
+ if (prescale > 63)
+ return -EINVAL;
+
+ if (duty_ns == period_ns)
+ dc = OST_PWMDCCR_FDCYCLE;
+ else
+ dc = (pv + 1) * duty_ns / period_ns;
+
+ /* NOTE: the clock to PWM has to be enabled first
+ * before writing to the registers
+ */
+ clk_enable(pwm->clk);
+ OST_PWMPWCR = prescale;
+ OST_PWMDCCR = pv - dc;
+ OST_PWMPCR = pv;
+ clk_disable(pwm->clk);
+
+ return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+ int rc = 0;
+
+ if (!pwm->clk_enabled) {
+ rc = clk_enable(pwm->clk);
+ if (!rc)
+ pwm->clk_enabled = 1;
+ }
+ return rc;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+ if (pwm->clk_enabled) {
+ clk_disable(pwm->clk);
+ pwm->clk_enabled = 0;
+ }
+}
+EXPORT_SYMBOL(pwm_disable);
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+ struct pwm_device *pwm;
+ int found = 0;
+
+ mutex_lock(&pwm_lock);
+
+ list_for_each_entry(pwm, &pwm_list, node) {
+ if (pwm->pwm_id == pwm_id) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ if (pwm->use_count == 0) {
+ pwm->use_count++;
+ pwm->label = label;
+ } else
+ pwm = ERR_PTR(-EBUSY);
+ } else
+ pwm = ERR_PTR(-ENOENT);
+
+ mutex_unlock(&pwm_lock);
+ return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+
+ if (pwm->use_count) {
+ pwm->use_count--;
+ pwm->label = NULL;
+ } else
+ pr_warning("PWM device already freed\n");
+
+ mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static inline void __add_pwm(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+ list_add_tail(&pwm->node, &pwm_list);
+ mutex_unlock(&pwm_lock);
+}
+
+static struct pwm_device *pwm_probe(struct platform_device *pdev,
+ unsigned int pwm_id, struct pwm_device *parent_pwm)
+{
+ struct pwm_device *pwm;
+ struct resource *r;
+ int ret = 0;
+
+ pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+ if (pwm == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pwm->clk = clk_get(NULL, "OST_CLK");
+ if (IS_ERR(pwm->clk)) {
+ ret = PTR_ERR(pwm->clk);
+ goto err_free;
+ }
+ pwm->clk_enabled = 0;
+
+ pwm->use_count = 0;
+ pwm->pwm_id = pwm_id;
+ pwm->pdev = pdev;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ ret = -ENODEV;
+ goto err_free_clk;
+ }
+
+ r = request_mem_region(r->start, resource_size(r), pdev->name);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "failed to request memory resource\n");
+ ret = -EBUSY;
+ goto err_free_clk;
+ }
+
+ __add_pwm(pwm);
+ platform_set_drvdata(pdev, pwm);
+ return pwm;
+
+err_free_clk:
+ clk_put(pwm->clk);
+err_free:
+ kfree(pwm);
+ return ERR_PTR(ret);
+}
+
+static int __devinit puv3_pwm_probe(struct platform_device *pdev)
+{
+ struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL);
+
+ if (IS_ERR(pwm))
+ return PTR_ERR(pwm);
+
+ return 0;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+ struct pwm_device *pwm;
+ struct resource *r;
+
+ pwm = platform_get_drvdata(pdev);
+ if (pwm == NULL)
+ return -ENODEV;
+
+ mutex_lock(&pwm_lock);
+ list_del(&pwm->node);
+ mutex_unlock(&pwm_lock);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(r->start, resource_size(r));
+
+ clk_put(pwm->clk);
+ kfree(pwm);
+ return 0;
+}
+
+static struct platform_driver puv3_pwm_driver = {
+ .driver = {
+ .name = "PKUnity-v3-PWM",
+ },
+ .probe = puv3_pwm_probe,
+ .remove = __devexit_p(pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+ int ret = 0;
+
+ ret = platform_driver_register(&puv3_pwm_driver);
+ if (ret) {
+ printk(KERN_ERR "failed to register puv3_pwm_driver\n");
+ return ret;
+ }
+
+ return ret;
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+ platform_driver_unregister(&puv3_pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/puv3/puv3_rtc.c b/drivers/staging/puv3/puv3_rtc.c
new file mode 100644
index 0000000..f58d07f
--- /dev/null
+++ b/drivers/staging/puv3/puv3_rtc.c
@@ -0,0 +1,388 @@
+/*
+ * linux/drivers/pkunity/puv3/puv3_rtc.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <[email protected]>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on: drivers/rtc/rtc-s3c.c
+ *
+ * Contributors & Additions/Fixes:
+ * 2009-05: First version by HU Dong-liang
+ * 2009-06 HU Dong-liang: add device_init_wakeup to support wakeup by rtc
+ *
+ * TODO:
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/clk.h>
+#include <linux/log2.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+#include <asm/mach/hardware.h>
+#include <asm/irq.h>
+
+static struct resource *puv3_rtc_mem;
+
+static int puv3_rtc_alarmno = IRQ_RTCAlarm;
+static int puv3_rtc_tickno = IRQ_RTC;
+
+static DEFINE_SPINLOCK(puv3_rtc_pie_lock);
+
+/* IRQ Handlers */
+
+static irqreturn_t puv3_rtc_alarmirq(int irq, void *id)
+{
+ struct rtc_device *rdev = id;
+
+ RTC_RTSR |= RTC_RTSR_AL;
+ rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t puv3_rtc_tickirq(int irq, void *id)
+{
+ struct rtc_device *rdev = id;
+
+ RTC_RTSR |= RTC_RTSR_HZ;
+ rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF);
+ return IRQ_HANDLED;
+}
+
+/* Update control registers */
+static void puv3_rtc_setaie(int to)
+{
+ unsigned int tmp;
+
+ pr_debug("%s: aie=%d\n", __func__, to);
+
+ tmp = RTC_RTSR & ~RTC_RTSR_ALE;
+
+ if (to)
+ tmp |= RTC_RTSR_ALE;
+
+ RTC_RTSR = tmp;
+}
+
+static int puv3_rtc_setpie(struct device *dev, int enabled)
+{
+ unsigned int tmp;
+
+ pr_debug("%s: pie=%d\n", __func__, enabled);
+
+ spin_lock_irq(&puv3_rtc_pie_lock);
+ tmp = RTC_RTSR & ~RTC_RTSR_HZE;
+
+ if (enabled)
+ tmp |= RTC_RTSR_HZE;
+
+ RTC_RTSR = tmp;
+ spin_unlock_irq(&puv3_rtc_pie_lock);
+
+ return 0;
+}
+
+static int puv3_rtc_setfreq(struct device *dev, int freq)
+{
+ return 0;
+}
+
+/* Time read/write */
+
+static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
+{
+ rtc_time_to_tm(RTC_RCNR, rtc_tm);
+
+ pr_debug("read time %02x.%02x.%02x %02x/%02x/%02x\n",
+ rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
+ rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
+
+ return 0;
+}
+
+static int puv3_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+ unsigned long rtc_count = 0;
+
+ pr_debug("set time %02d.%02d.%02d %02d/%02d/%02d\n",
+ tm->tm_year, tm->tm_mon, tm->tm_mday,
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+ rtc_tm_to_time(tm, &rtc_count);
+ RTC_RCNR = rtc_count;
+
+ return 0;
+}
+
+static int puv3_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rtc_time *alm_tm = &alrm->time;
+
+ rtc_time_to_tm(RTC_RTAR, alm_tm);
+
+ alrm->enabled = RTC_RTSR & RTC_RTSR_ALE;
+
+ pr_debug("read alarm %02x %02x.%02x.%02x %02x/%02x/%02x\n",
+ alrm->enabled,
+ alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday,
+ alm_tm->tm_hour, alm_tm->tm_min, alm_tm->tm_sec);
+
+ return 0;
+}
+
+static int puv3_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rtc_time *tm = &alrm->time;
+ unsigned long rtcalarm_count = 0;
+
+ pr_debug("puv3_rtc_setalarm: %d, %02x/%02x/%02x %02x.%02x.%02x\n",
+ alrm->enabled,
+ tm->tm_mday & 0xff, tm->tm_mon & 0xff, tm->tm_year & 0xff,
+ tm->tm_hour & 0xff, tm->tm_min & 0xff, tm->tm_sec);
+
+ rtc_tm_to_time(tm, &rtcalarm_count);
+ RTC_RTAR = rtcalarm_count;
+
+ puv3_rtc_setaie(alrm->enabled);
+
+ if (alrm->enabled)
+ enable_irq_wake(puv3_rtc_alarmno);
+ else
+ disable_irq_wake(puv3_rtc_alarmno);
+
+ return 0;
+}
+
+static int puv3_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+ seq_printf(seq, "periodic_IRQ\t: %s\n",
+ (RTC_RTSR & RTC_RTSR_HZE) ? "yes" : "no");
+ return 0;
+}
+
+static int puv3_rtc_open(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = request_irq(puv3_rtc_alarmno, puv3_rtc_alarmirq,
+ IRQF_DISABLED, "pkunity-rtc alarm", rtc_dev);
+
+ if (ret) {
+ dev_err(dev, "IRQ%d error %d\n", puv3_rtc_alarmno, ret);
+ return ret;
+ }
+
+ ret = request_irq(puv3_rtc_tickno, puv3_rtc_tickirq,
+ IRQF_DISABLED, "pkunity-rtc tick", rtc_dev);
+
+ if (ret) {
+ dev_err(dev, "IRQ%d error %d\n", puv3_rtc_tickno, ret);
+ goto tick_err;
+ }
+
+ return ret;
+
+ tick_err:
+ free_irq(puv3_rtc_alarmno, rtc_dev);
+ return ret;
+}
+
+static void puv3_rtc_release(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
+
+ /* do not clear AIE here, it may be needed for wake */
+
+ puv3_rtc_setpie(dev, 0);
+ free_irq(puv3_rtc_alarmno, rtc_dev);
+ free_irq(puv3_rtc_tickno, rtc_dev);
+}
+
+static const struct rtc_class_ops puv3_rtcops = {
+ .open = puv3_rtc_open,
+ .release = puv3_rtc_release,
+ .read_time = puv3_rtc_gettime,
+ .set_time = puv3_rtc_settime,
+ .read_alarm = puv3_rtc_getalarm,
+ .set_alarm = puv3_rtc_setalarm,
+ .irq_set_freq = puv3_rtc_setfreq,
+ .irq_set_state = puv3_rtc_setpie,
+ .proc = puv3_rtc_proc,
+};
+
+static void puv3_rtc_enable(struct platform_device *pdev, int en)
+{
+ if (!en) {
+ RTC_RTSR &= ~RTC_RTSR_HZE;
+ } else {
+ /* re-enable the device, and check it is ok */
+
+ if ((RTC_RTSR & RTC_RTSR_HZE) == 0) {
+ dev_info(&pdev->dev, "rtc disabled, re-enabling\n");
+ RTC_RTSR |= RTC_RTSR_HZE;
+ }
+ }
+}
+
+static int puv3_rtc_remove(struct platform_device *dev)
+{
+ struct rtc_device *rtc = platform_get_drvdata(dev);
+
+ platform_set_drvdata(dev, NULL);
+ rtc_device_unregister(rtc);
+
+ puv3_rtc_setpie(&dev->dev, 0);
+ puv3_rtc_setaie(0);
+
+ release_resource(puv3_rtc_mem);
+ kfree(puv3_rtc_mem);
+
+ return 0;
+}
+
+static int puv3_rtc_probe(struct platform_device *pdev)
+{
+ struct rtc_device *rtc;
+ struct resource *res;
+ int ret;
+
+ pr_debug("%s: probe=%p\n", __func__, pdev);
+
+ /* find the IRQs */
+
+ puv3_rtc_tickno = platform_get_irq(pdev, 1);
+ if (puv3_rtc_tickno < 0) {
+ dev_err(&pdev->dev, "no irq for rtc tick\n");
+ return -ENOENT;
+ }
+
+ puv3_rtc_alarmno = platform_get_irq(pdev, 0);
+ if (puv3_rtc_alarmno < 0) {
+ dev_err(&pdev->dev, "no irq for alarm\n");
+ return -ENOENT;
+ }
+
+ pr_debug("PKUnity_rtc: tick irq %d, alarm irq %d\n",
+ puv3_rtc_tickno, puv3_rtc_alarmno);
+
+ /* get the memory region */
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "failed to get memory region resource\n");
+ return -ENOENT;
+ }
+
+ puv3_rtc_mem = request_mem_region(res->start,
+ res->end-res->start+1,
+ pdev->name);
+
+ if (puv3_rtc_mem == NULL) {
+ dev_err(&pdev->dev, "failed to reserve memory region\n");
+ ret = -ENOENT;
+ goto err_nores;
+ }
+
+ puv3_rtc_enable(pdev, 1);
+
+ puv3_rtc_setfreq(&pdev->dev, 1);
+
+ /* register RTC and exit */
+
+ rtc = rtc_device_register("pkunity", &pdev->dev, &puv3_rtcops,
+ THIS_MODULE);
+
+ if (IS_ERR(rtc)) {
+ dev_err(&pdev->dev, "cannot attach rtc\n");
+ ret = PTR_ERR(rtc);
+ goto err_nortc;
+ }
+
+ /* platform setup code should have handled this; sigh */
+ if (!device_can_wakeup(&pdev->dev))
+ device_init_wakeup(&pdev->dev, 1);
+
+ platform_set_drvdata(pdev, rtc);
+ return 0;
+
+ err_nortc:
+ puv3_rtc_enable(pdev, 0);
+ release_resource(puv3_rtc_mem);
+
+ err_nores:
+ return ret;
+}
+
+#ifdef CONFIG_PM
+
+/* RTC Power management control */
+
+static int ticnt_save;
+
+static int puv3_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ /* save RTAR for anyone using periodic interrupts */
+ ticnt_save = RTC_RTAR;
+ puv3_rtc_enable(pdev, 0);
+ return 0;
+}
+
+static int puv3_rtc_resume(struct platform_device *pdev)
+{
+ puv3_rtc_enable(pdev, 1);
+ RTC_RTAR = ticnt_save;
+ return 0;
+}
+#else
+#define puv3_rtc_suspend NULL
+#define puv3_rtc_resume NULL
+#endif
+
+static struct platform_driver puv3_rtcdrv = {
+ .probe = puv3_rtc_probe,
+ .remove = __devexit_p(puv3_rtc_remove),
+ .suspend = puv3_rtc_suspend,
+ .resume = puv3_rtc_resume,
+ .driver = {
+ .name = "PKUnity-v3-RTC",
+ .owner = THIS_MODULE,
+ }
+};
+
+static char __initdata banner[] = "PKUnity-v3 RTC, (c) 2009 PKUnity Co.\n";
+
+static int __init puv3_rtc_init(void)
+{
+ printk(banner);
+ return platform_driver_register(&puv3_rtcdrv);
+}
+
+static void __exit puv3_rtc_exit(void)
+{
+ platform_driver_unregister(&puv3_rtcdrv);
+}
+
+module_init(puv3_rtc_init);
+module_exit(puv3_rtc_exit);
+
+MODULE_DESCRIPTION("RTC Driver for the PKUnity v3 chip");
+MODULE_AUTHOR("Hu Dongliang");
+MODULE_LICENSE("GPL v2");
+
2010/12/25 Guan Xuetao <[email protected]>:
> From: Guan Xuetao <[email protected]>
>
> Patch 9 implements timer and time. RTC and PWM device drivers are also here.
>
> Signed-off-by: Guan Xuetao <[email protected]>
Just a small request:
> +static struct clocksource cksrc_puv3_oscr = {
> + ? ? ? .name ? ? ? ? ? = "oscr",
> + ? ? ? .rating ? ? ? ? = 200,
> + ? ? ? .read ? ? ? ? ? = puv3_read_oscr,
> + ? ? ? .mask ? ? ? ? ? = CLOCKSOURCE_MASK(32),
> + ? ? ? .shift ? ? ? ? ?= 18,
Drop the shift assignment here.
> + ? ? ? cksrc_puv3_oscr.mult =
> + ? ? ? ? ? ? ? clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_puv3_oscr.shift);
> +
Drop the mult assignment here.
> + ? ? ? clocksource_register(&cksrc_puv3_oscr);
Use "clocksource_register_hz(&cksrc_puv3_oscr, CLOCK_TICK_RATE );" and
the kernel will fill in mult/shift appropriately.
If you have any troubles after doing so, let me know.
thanks
-john