2018-06-06 14:38:44

by Dongjiu Geng

[permalink] [raw]
Subject: [PATCH v2] usb: xhci: remove the code build warning

Initialize the 'err' variate to remove the build warning,
the warning is shown as below:

drivers/usb/host/xhci-tegra.c: In function 'tegra_xusb_mbox_thread':
drivers/usb/host/xhci-tegra.c:552:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized]
drivers/usb/host/xhci-tegra.c:482:6: note: 'err' was declared here

Signed-off-by: Dongjiu Geng <[email protected]>
Acked-by: Thierry Reding <[email protected]>
---
How to reproduce:
1. make defconfig ARCH=arm
2. make -j100 CROSS_COMPILE=arm-linux-gnueabi- ARCH=arm

Then you can see below warnings:
drivers/usb/host/xhci-tegra.c: In function 'tegra_xusb_mbox_thread':
drivers/usb/host/xhci-tegra.c:552:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized]
drivers/usb/host/xhci-tegra.c:482:6: note: 'err' was declared here
---
drivers/usb/host/xhci-tegra.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index a8c1d07..d50549f 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -481,7 +481,7 @@ static void tegra_xusb_mbox_handle(struct tegra_xusb *tegra,
unsigned long mask;
unsigned int port;
bool idle, enable;
- int err;
+ int err = 0;

memset(&rsp, 0, sizeof(rsp));

--
1.9.1




2018-06-11 12:31:31

by Dongjiu Geng

[permalink] [raw]
Subject: Re: [PATCH v2] usb: xhci: remove the code build warning

Hi Mathias,
This patch is ready to apply, It is great that this patch can be applied to 4.18. thanks a lot.

On 2018/6/6 22:36, Dongjiu Geng wrote:
> Initialize the 'err' variate to remove the build warning,
> the warning is shown as below:
>
> drivers/usb/host/xhci-tegra.c: In function 'tegra_xusb_mbox_thread':
> drivers/usb/host/xhci-tegra.c:552:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized]
> drivers/usb/host/xhci-tegra.c:482:6: note: 'err' was declared here
>
> Signed-off-by: Dongjiu Geng <[email protected]>
> Acked-by: Thierry Reding <[email protected]>
> ---
> How to reproduce:
> 1. make defconfig ARCH=arm
> 2. make -j100 CROSS_COMPILE=arm-linux-gnueabi- ARCH=arm
>
> Then you can see below warnings:
> drivers/usb/host/xhci-tegra.c: In function 'tegra_xusb_mbox_thread':
> drivers/usb/host/xhci-tegra.c:552:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized]
> drivers/usb/host/xhci-tegra.c:482:6: note: 'err' was declared here
> ---
> drivers/usb/host/xhci-tegra.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
> index a8c1d07..d50549f 100644
> --- a/drivers/usb/host/xhci-tegra.c
> +++ b/drivers/usb/host/xhci-tegra.c
> @@ -481,7 +481,7 @@ static void tegra_xusb_mbox_handle(struct tegra_xusb *tegra,
> unsigned long mask;
> unsigned int port;
> bool idle, enable;
> - int err;
> + int err = 0;
>
> memset(&rsp, 0, sizeof(rsp));
>
>


2018-06-15 10:41:11

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH v2] usb: xhci: remove the code build warning

On Wed, Jun 06, 2018 at 10:36:59PM +0800, Dongjiu Geng wrote:
> Initialize the 'err' variate to remove the build warning,
> the warning is shown as below:
>
> drivers/usb/host/xhci-tegra.c: In function 'tegra_xusb_mbox_thread':
> drivers/usb/host/xhci-tegra.c:552:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized]
> drivers/usb/host/xhci-tegra.c:482:6: note: 'err' was declared here
>
> Signed-off-by: Dongjiu Geng <[email protected]>
> Acked-by: Thierry Reding <[email protected]>
> ---
> How to reproduce:
> 1. make defconfig ARCH=arm
> 2. make -j100 CROSS_COMPILE=arm-linux-gnueabi- ARCH=arm
>
> Then you can see below warnings:
> drivers/usb/host/xhci-tegra.c: In function 'tegra_xusb_mbox_thread':
> drivers/usb/host/xhci-tegra.c:552:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized]
> drivers/usb/host/xhci-tegra.c:482:6: note: 'err' was declared here

What changed from v1? Always put that below the --- line.

Please fix up and resend a v3.

thanks,

greg k-h

2018-06-16 09:09:08

by Dongjiu Geng

[permalink] [raw]
Subject: 答复: [PATCH v2] usb: xhci: remove the code b uild warning

> On Wed, Jun 06, 2018 at 10:36:59PM +0800, Dongjiu Geng wrote:
> > Initialize the 'err' variate to remove the build warning, the warning
> > is shown as below:
> >
> > drivers/usb/host/xhci-tegra.c: In function 'tegra_xusb_mbox_thread':
> > drivers/usb/host/xhci-tegra.c:552:6: warning: 'err' may be used
> > uninitialized in this function [-Wuninitialized]
> > drivers/usb/host/xhci-tegra.c:482:6: note: 'err' was declared here
> >
> > Signed-off-by: Dongjiu Geng <[email protected]>
> > Acked-by: Thierry Reding <[email protected]>
> > ---
> > How to reproduce:
> > 1. make defconfig ARCH=arm
> > 2. make -j100 CROSS_COMPILE=arm-linux-gnueabi- ARCH=arm
> >
> > Then you can see below warnings:
> > drivers/usb/host/xhci-tegra.c: In function 'tegra_xusb_mbox_thread':
> > drivers/usb/host/xhci-tegra.c:552:6: warning: 'err' may be used
> > uninitialized in this function [-Wuninitialized]
> > drivers/usb/host/xhci-tegra.c:482:6: note: 'err' was declared here
>
> What changed from v1? Always put that below the --- line.
>
> Please fix up and resend a v3.


Thanks, I justly add "Acked-by: Thierry Reding <[email protected]>" in the V2 compared with v1
Anyway I will put that below and resend a v3.

>
> thanks,
>
> greg k-h