On Tue, Jun 14, 2022 at 03:14:10PM +0800, Yu Kuai wrote:
> We found that boot time is increased for about 8s after upgrading kernel
> from v4.19 to v5.10(megaraid-sas is used in the environment).
But 'blk-mq: clearing flush request reference in tags->rqs[]' was merged
to v5.14, :-)
>
> Following is where the extra time is spent:
>
> scsi_probe_and_add_lun
> __scsi_remove_device
> blk_cleanup_queue
> blk_mq_exit_queue
> blk_mq_exit_hw_queues
> blk_mq_exit_hctx
> blk_mq_clear_flush_rq_mapping -> function latency is 0.1ms
So queue_depth looks pretty long, is it 4k?
But if it is 0.1ms, how can the 8sec delay be caused? That requires 80K hw queues
for making so long, so I guess there must be other delay added by the feature
of BLK_MQ_F_TAG_HCTX_SHARED.
> cmpxchg
>
> There are three reasons:
> 1) megaraid-sas is using multiple hctxs in v5.10, thus blk_mq_exit_hctx()
> will be called much more times in v5.10 compared to v4.19.
> 2) scsi will scan for each target thus __scsi_remove_device() will be
> called for many times.
> 3) blk_mq_clear_flush_rq_mapping() is introduced after v4.19, it will
> call cmpxchg() for each request, and function latency is abount 0.1ms.
>
> Since that blk_mq_clear_flush_rq_mapping() will only be called while the
> queue is freezed already, which means there is no inflight request,
> it's safe to set NULL for 'tags->rqs[]' directly instead of using
> cmpxchg(). Tests show that with this change, function latency of
> blk_mq_clear_flush_rq_mapping() is about 1us, and boot time is not
> increased.
tags is shared among all LUNs attached to the host, so freezing single
request queue here means nothing, so your patch doesn't work.
Please test the following patch, and see if it can improve boot delay for
your case.
diff --git a/block/blk-mq.c b/block/blk-mq.c
index e9bf950983c7..1463076a527c 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -3443,8 +3443,9 @@ static void blk_mq_exit_hctx(struct request_queue *q,
if (blk_mq_hw_queue_mapped(hctx))
blk_mq_tag_idle(hctx);
- blk_mq_clear_flush_rq_mapping(set->tags[hctx_idx],
- set->queue_depth, flush_rq);
+ if (blk_queue_init_done(q))
+ blk_mq_clear_flush_rq_mapping(set->tags[hctx_idx],
+ set->queue_depth, flush_rq);
if (set->ops->exit_request)
set->ops->exit_request(set, flush_rq, hctx_idx);
Thanks,
Ming
?? 2022/06/14 15:31, Ming Lei д??:
> On Tue, Jun 14, 2022 at 03:14:10PM +0800, Yu Kuai wrote:
>> We found that boot time is increased for about 8s after upgrading kernel
>> from v4.19 to v5.10(megaraid-sas is used in the environment).
>
> But 'blk-mq: clearing flush request reference in tags->rqs[]' was merged
> to v5.14, :-)
Hi,
Yes, but this patch is applied to 5.10 stable, thus we backport in our
v5.10. Sorry that I didn't mention that.
>
>>
>> Following is where the extra time is spent:
>>
>>
>> __scsi_remove_device
>> blk_cleanup_queue
>> blk_mq_exit_queue
>> blk_mq_exit_hw_queues
>> blk_mq_exit_hctx
>> blk_mq_clear_flush_rq_mapping -> function latency is 0.1ms
>
> So queue_depth looks pretty long, is it 4k?
No, in the environment, it's just 32, and nr_hw_queues is 128, which
means each blk_cleanup_queue() will cost about 10-20 ms.
>
> But if it is 0.1ms, how can the 8sec delay be caused? That requires 80K hw queues
> for making so long, so I guess there must be other delay added by the feature
> of BLK_MQ_F_TAG_HCTX_SHARED.
Please see details in the reasons 2), scsi scan will call
__scsi_remove_device() a lot of times(each host, each channel, each
target).
>
>> cmpxchg
>>
>> There are three reasons:
>> 1) megaraid-sas is using multiple hctxs in v5.10, thus blk_mq_exit_hctx()
>> will be called much more times in v5.10 compared to v4.19.
>> 2) scsi will scan for each target thus __scsi_remove_device() will be
>> called for many times.
>> 3) blk_mq_clear_flush_rq_mapping() is introduced after v4.19, it will
>> call cmpxchg() for each request, and function latency is abount 0.1ms.
>>
>> Since that blk_mq_clear_flush_rq_mapping() will only be called while the
>> queue is freezed already, which means there is no inflight request,
>> it's safe to set NULL for 'tags->rqs[]' directly instead of using
>> cmpxchg(). Tests show that with this change, function latency of
>> blk_mq_clear_flush_rq_mapping() is about 1us, and boot time is not
>> increased.
>
> tags is shared among all LUNs attached to the host, so freezing single
> request queue here means nothing, so your patch doesn't work.
You'are right, I forgot about that tags can be shared.
>
> Please test the following patch, and see if it can improve boot delay for
> your case.
>
> diff --git a/block/blk-mq.c b/block/blk-mq.c
> index e9bf950983c7..1463076a527c 100644
> --- a/block/blk-mq.c
> +++ b/block/blk-mq.c
> @@ -3443,8 +3443,9 @@ static void blk_mq_exit_hctx(struct request_queue *q,
> if (blk_mq_hw_queue_mapped(hctx))
> blk_mq_tag_idle(hctx);
>
> - blk_mq_clear_flush_rq_mapping(set->tags[hctx_idx],
> - set->queue_depth, flush_rq);
> + if (blk_queue_init_done(q))
> + blk_mq_clear_flush_rq_mapping(set->tags[hctx_idx],
> + set->queue_depth, flush_rq);
> if (set->ops->exit_request)
> set->ops->exit_request(set, flush_rq, hctx_idx);
>
Thanks for the patch, I test it and boot delay is fixed.
Kuai
>
>
> Thanks,
> Ming
>
> .
>
On Tue, Jun 14, 2022 at 09:15:36PM +0800, Yu Kuai wrote:
> 在 2022/06/14 15:31, Ming Lei 写道:
> > On Tue, Jun 14, 2022 at 03:14:10PM +0800, Yu Kuai wrote:
> > > We found that boot time is increased for about 8s after upgrading kernel
> > > from v4.19 to v5.10(megaraid-sas is used in the environment).
> >
> > But 'blk-mq: clearing flush request reference in tags->rqs[]' was merged
> > to v5.14, :-)
> Hi,
>
> Yes, but this patch is applied to 5.10 stable, thus we backport in our
> v5.10. Sorry that I didn't mention that.
>
> >
> > >
> > > Following is where the extra time is spent:
> > >
> > >
> > > __scsi_remove_device
> > > blk_cleanup_queue
> > > blk_mq_exit_queue
> > > blk_mq_exit_hw_queues
> > > blk_mq_exit_hctx
> > > blk_mq_clear_flush_rq_mapping -> function latency is 0.1ms
> >
> > So queue_depth looks pretty long, is it 4k?
> No, in the environment, it's just 32, and nr_hw_queues is 128, which
> means each blk_cleanup_queue() will cost about 10-20 ms.
So 32 * cmpxchg takes 100us, which is really crazy, what is the arch
and processor?
>
> >
> > But if it is 0.1ms, how can the 8sec delay be caused? That requires 80K hw queues
> > for making so long, so I guess there must be other delay added by the feature
> > of BLK_MQ_F_TAG_HCTX_SHARED.
>
> Please see details in the reasons 2), scsi scan will call
> __scsi_remove_device() a lot of times(each host, each channel, each
> target).
80K / 128 = 640 LUNs.
OK, that can be true.
> >
> > > cmpxchg
> > >
> > > There are three reasons:
> > > 1) megaraid-sas is using multiple hctxs in v5.10, thus blk_mq_exit_hctx()
> > > will be called much more times in v5.10 compared to v4.19.
> > > 2) scsi will scan for each target thus __scsi_remove_device() will be
> > > called for many times.
> > > 3) blk_mq_clear_flush_rq_mapping() is introduced after v4.19, it will
> > > call cmpxchg() for each request, and function latency is abount 0.1ms.
> > >
> > > Since that blk_mq_clear_flush_rq_mapping() will only be called while the
> > > queue is freezed already, which means there is no inflight request,
> > > it's safe to set NULL for 'tags->rqs[]' directly instead of using
> > > cmpxchg(). Tests show that with this change, function latency of
> > > blk_mq_clear_flush_rq_mapping() is about 1us, and boot time is not
> > > increased.
> >
> > tags is shared among all LUNs attached to the host, so freezing single
> > request queue here means nothing, so your patch doesn't work.
>
> You'are right, I forgot about that tags can be shared.
>
> >
> > Please test the following patch, and see if it can improve boot delay for
> > your case.
> >
> > diff --git a/block/blk-mq.c b/block/blk-mq.c
> > index e9bf950983c7..1463076a527c 100644
> > --- a/block/blk-mq.c
> > +++ b/block/blk-mq.c
> > @@ -3443,8 +3443,9 @@ static void blk_mq_exit_hctx(struct request_queue *q,
> > if (blk_mq_hw_queue_mapped(hctx))
> > blk_mq_tag_idle(hctx);
> > - blk_mq_clear_flush_rq_mapping(set->tags[hctx_idx],
> > - set->queue_depth, flush_rq);
> > + if (blk_queue_init_done(q))
> > + blk_mq_clear_flush_rq_mapping(set->tags[hctx_idx],
> > + set->queue_depth, flush_rq);
> > if (set->ops->exit_request)
> > set->ops->exit_request(set, flush_rq, hctx_idx);
>
> Thanks for the patch, I test it and boot delay is fixed.
Thanks for the test, and I will send it out tomorrow.
Thanks,
Ming
On Tue, Jun 14, 2022 at 09:15:36PM +0800, Yu Kuai wrote:
> > for making so long, so I guess there must be other delay added by the feature
> > of BLK_MQ_F_TAG_HCTX_SHARED.
>
> Please see details in the reasons 2), scsi scan will call
> __scsi_remove_device() a lot of times(each host, each channel, each
> target).
Well, if the SCSI core does that you are falling back to a sequentical
scan instad of using REPORT LUNS. Which seems like a bug on its own
that is worth investigation.