Use rpmsg byte conversion functions in order for the RPMSG
headers and generic functions to be used by external entities.
Signed-off-by: Mathieu Poirier <[email protected]>
---
drivers/rpmsg/virtio_rpmsg_bus.c | 60 +++++++++++++++++++-------------
1 file changed, 35 insertions(+), 25 deletions(-)
diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index 9006fc7f73d0..793fe924671f 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -19,11 +19,11 @@
#include <linux/mutex.h>
#include <linux/of_device.h>
#include <linux/rpmsg.h>
+#include <linux/rpmsg_byteorder.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/virtio.h>
-#include <linux/virtio_byteorder.h>
#include <linux/virtio_ids.h>
#include <linux/virtio_config.h>
#include <linux/wait.h>
@@ -85,11 +85,11 @@ struct virtproc_info {
* Every message sent(/received) on the rpmsg bus begins with this header.
*/
struct rpmsg_hdr {
- __virtio32 src;
- __virtio32 dst;
- __virtio32 reserved;
- __virtio16 len;
- __virtio16 flags;
+ __rpmsg32 src;
+ __rpmsg32 dst;
+ __rpmsg32 reserved;
+ __rpmsg16 len;
+ __rpmsg16 flags;
u8 data[];
} __packed;
@@ -107,8 +107,8 @@ struct rpmsg_hdr {
*/
struct rpmsg_ns_msg {
char name[RPMSG_NAME_SIZE];
- __virtio32 addr;
- __virtio32 flags;
+ __rpmsg32 addr;
+ __rpmsg32 flags;
} __packed;
/**
@@ -280,6 +280,14 @@ static struct rpmsg_endpoint *__rpmsg_create_ept(struct virtproc_info *vrp,
return NULL;
}
+static bool virtio_rpmsg_is_little_endian(struct rpmsg_device *rpdev)
+{
+ struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
+ struct virtproc_info *vrp = vch->vrp;
+
+ return virtio_is_little_endian(vrp->vdev);
+}
+
static struct rpmsg_endpoint *virtio_rpmsg_create_ept(struct rpmsg_device *rpdev,
rpmsg_rx_cb_t cb,
void *priv,
@@ -336,8 +344,8 @@ static int virtio_rpmsg_announce_create(struct rpmsg_device *rpdev)
struct rpmsg_ns_msg nsm;
strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE);
- nsm.addr = cpu_to_virtio32(vrp->vdev, rpdev->ept->addr);
- nsm.flags = cpu_to_virtio32(vrp->vdev, RPMSG_NS_CREATE);
+ nsm.addr = cpu_to_rpmsg32(rpdev, rpdev->ept->addr);
+ nsm.flags = cpu_to_rpmsg32(rpdev, RPMSG_NS_CREATE);
err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
if (err)
@@ -360,8 +368,8 @@ static int virtio_rpmsg_announce_destroy(struct rpmsg_device *rpdev)
struct rpmsg_ns_msg nsm;
strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE);
- nsm.addr = cpu_to_virtio32(vrp->vdev, rpdev->ept->addr);
- nsm.flags = cpu_to_virtio32(vrp->vdev, RPMSG_NS_DESTROY);
+ nsm.addr = cpu_to_rpmsg32(rpdev, rpdev->ept->addr);
+ nsm.flags = cpu_to_rpmsg32(rpdev, RPMSG_NS_DESTROY);
err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
if (err)
@@ -372,6 +380,7 @@ static int virtio_rpmsg_announce_destroy(struct rpmsg_device *rpdev)
}
static const struct rpmsg_device_ops virtio_rpmsg_ops = {
+ .is_little_endian = virtio_rpmsg_is_little_endian,
.create_ept = virtio_rpmsg_create_ept,
.announce_create = virtio_rpmsg_announce_create,
.announce_destroy = virtio_rpmsg_announce_destroy,
@@ -613,10 +622,10 @@ static int rpmsg_send_offchannel_raw(struct rpmsg_device *rpdev,
}
}
- msg->len = cpu_to_virtio16(vrp->vdev, len);
+ msg->len = cpu_to_rpmsg16(rpdev, len);
msg->flags = 0;
- msg->src = cpu_to_virtio32(vrp->vdev, src);
- msg->dst = cpu_to_virtio32(vrp->vdev, dst);
+ msg->src = cpu_to_rpmsg32(rpdev, src);
+ msg->dst = cpu_to_rpmsg32(rpdev, dst);
msg->reserved = 0;
memcpy(msg->data, data, len);
@@ -705,14 +714,15 @@ static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
{
struct rpmsg_endpoint *ept;
struct scatterlist sg;
- unsigned int msg_len = virtio16_to_cpu(vrp->vdev, msg->len);
+ bool little_endian = rpmsg_is_little_endian();
+ unsigned int msg_len = __rpmsg16_to_cpu(little_endian, msg->len);
int err;
dev_dbg(dev, "From: 0x%x, To: 0x%x, Len: %d, Flags: %d, Reserved: %d\n",
- virtio32_to_cpu(vrp->vdev, msg->src),
- virtio32_to_cpu(vrp->vdev, msg->dst), msg_len,
- virtio16_to_cpu(vrp->vdev, msg->flags),
- virtio32_to_cpu(vrp->vdev, msg->reserved));
+ __rpmsg32_to_cpu(little_endian, msg->src),
+ __rpmsg32_to_cpu(little_endian, msg->dst), msg_len,
+ __rpmsg16_to_cpu(little_endian, msg->flags),
+ __rpmsg32_to_cpu(little_endian, msg->reserved));
#if defined(CONFIG_DYNAMIC_DEBUG)
dynamic_hex_dump("rpmsg_virtio RX: ", DUMP_PREFIX_NONE, 16, 1,
msg, sizeof(*msg) + msg_len, true);
@@ -731,7 +741,7 @@ static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
/* use the dst addr to fetch the callback of the appropriate user */
mutex_lock(&vrp->endpoints_lock);
- ept = idr_find(&vrp->endpoints, virtio32_to_cpu(vrp->vdev, msg->dst));
+ ept = idr_find(&vrp->endpoints, __rpmsg32_to_cpu(little_endian, msg->dst));
/* let's make sure no one deallocates ept while we use it */
if (ept)
@@ -745,7 +755,7 @@ static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
if (ept->cb)
ept->cb(ept->rpdev, msg->data, msg_len, ept->priv,
- virtio32_to_cpu(vrp->vdev, msg->src));
+ __rpmsg32_to_cpu(little_endian, msg->src));
mutex_unlock(&ept->cb_lock);
@@ -853,13 +863,13 @@ static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len,
strncpy(chinfo.name, msg->name, sizeof(chinfo.name));
chinfo.src = RPMSG_ADDR_ANY;
- chinfo.dst = virtio32_to_cpu(vrp->vdev, msg->addr);
+ chinfo.dst = rpmsg32_to_cpu(rpdev, msg->addr);
dev_info(dev, "%sing channel %s addr 0x%x\n",
- virtio32_to_cpu(vrp->vdev, msg->flags) & RPMSG_NS_DESTROY ?
+ rpmsg32_to_cpu(rpdev, msg->flags) & RPMSG_NS_DESTROY ?
"destroy" : "creat", msg->name, chinfo.dst);
- if (virtio32_to_cpu(vrp->vdev, msg->flags) & RPMSG_NS_DESTROY) {
+ if (rpmsg32_to_cpu(rpdev, msg->flags) & RPMSG_NS_DESTROY) {
ret = rpmsg_unregister_device(&vrp->vdev->dev, &chinfo);
if (ret)
dev_err(dev, "rpmsg_destroy_channel failed: %d\n", ret);
--
2.25.1
On 10/14/20 1:25 AM, Mathieu Poirier wrote:
> Use rpmsg byte conversion functions in order for the RPMSG
> headers and generic functions to be used by external entities.
>
> Signed-off-by: Mathieu Poirier <[email protected]>
> ---
> drivers/rpmsg/virtio_rpmsg_bus.c | 60 +++++++++++++++++++-------------
> 1 file changed, 35 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
> index 9006fc7f73d0..793fe924671f 100644
> --- a/drivers/rpmsg/virtio_rpmsg_bus.c
> +++ b/drivers/rpmsg/virtio_rpmsg_bus.c
> @@ -19,11 +19,11 @@
> #include <linux/mutex.h>
> #include <linux/of_device.h>
> #include <linux/rpmsg.h>
> +#include <linux/rpmsg_byteorder.h>
> #include <linux/scatterlist.h>
> #include <linux/slab.h>
> #include <linux/sched.h>
> #include <linux/virtio.h>
> -#include <linux/virtio_byteorder.h>
> #include <linux/virtio_ids.h>
> #include <linux/virtio_config.h>
> #include <linux/wait.h>
> @@ -85,11 +85,11 @@ struct virtproc_info {
> * Every message sent(/received) on the rpmsg bus begins with this header.
> */
> struct rpmsg_hdr {
> - __virtio32 src;
> - __virtio32 dst;
> - __virtio32 reserved;
> - __virtio16 len;
> - __virtio16 flags;
> + __rpmsg32 src;
> + __rpmsg32 dst;
> + __rpmsg32 reserved;
> + __rpmsg16 len;
> + __rpmsg16 flags;
> u8 data[];
> } __packed;
>
> @@ -107,8 +107,8 @@ struct rpmsg_hdr {
> */
> struct rpmsg_ns_msg {
> char name[RPMSG_NAME_SIZE];
> - __virtio32 addr;
> - __virtio32 flags;
> + __rpmsg32 addr;
> + __rpmsg32 flags;
> } __packed;
>
> /**
> @@ -280,6 +280,14 @@ static struct rpmsg_endpoint *__rpmsg_create_ept(struct virtproc_info *vrp,
> return NULL;
> }
>
> +static bool virtio_rpmsg_is_little_endian(struct rpmsg_device *rpdev)
> +{
> + struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
> + struct virtproc_info *vrp = vch->vrp;
> +
> + return virtio_is_little_endian(vrp->vdev);
> +}
Regarding this i wonder if the endianess could not be a rpmsg_device field that would be set on
__rpmsg_create_channel?
I don't think that the endianess could change, so perhaps no need to call ops for each conversion
using interface implemented in rpmsg.h...
But perhaps I missed something?
> +
> static struct rpmsg_endpoint *virtio_rpmsg_create_ept(struct rpmsg_device *rpdev,
> rpmsg_rx_cb_t cb,
> void *priv,
> @@ -336,8 +344,8 @@ static int virtio_rpmsg_announce_create(struct rpmsg_device *rpdev)
> struct rpmsg_ns_msg nsm;
>
> strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE);
> - nsm.addr = cpu_to_virtio32(vrp->vdev, rpdev->ept->addr);
> - nsm.flags = cpu_to_virtio32(vrp->vdev, RPMSG_NS_CREATE);
> + nsm.addr = cpu_to_rpmsg32(rpdev, rpdev->ept->addr);
> + nsm.flags = cpu_to_rpmsg32(rpdev, RPMSG_NS_CREATE);
>
> err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
> if (err)
> @@ -360,8 +368,8 @@ static int virtio_rpmsg_announce_destroy(struct rpmsg_device *rpdev)
> struct rpmsg_ns_msg nsm;
>
> strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE);
> - nsm.addr = cpu_to_virtio32(vrp->vdev, rpdev->ept->addr);
> - nsm.flags = cpu_to_virtio32(vrp->vdev, RPMSG_NS_DESTROY);
> + nsm.addr = cpu_to_rpmsg32(rpdev, rpdev->ept->addr);
> + nsm.flags = cpu_to_rpmsg32(rpdev, RPMSG_NS_DESTROY);
>
> err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
> if (err)
> @@ -372,6 +380,7 @@ static int virtio_rpmsg_announce_destroy(struct rpmsg_device *rpdev)
> }
>
> static const struct rpmsg_device_ops virtio_rpmsg_ops = {
> + .is_little_endian = virtio_rpmsg_is_little_endian,
> .create_ept = virtio_rpmsg_create_ept,
> .announce_create = virtio_rpmsg_announce_create,
> .announce_destroy = virtio_rpmsg_announce_destroy,
> @@ -613,10 +622,10 @@ static int rpmsg_send_offchannel_raw(struct rpmsg_device *rpdev,
> }
> }
>
> - msg->len = cpu_to_virtio16(vrp->vdev, len);
> + msg->len = cpu_to_rpmsg16(rpdev, len);
> msg->flags = 0;
> - msg->src = cpu_to_virtio32(vrp->vdev, src);
> - msg->dst = cpu_to_virtio32(vrp->vdev, dst);
> + msg->src = cpu_to_rpmsg32(rpdev, src);
> + msg->dst = cpu_to_rpmsg32(rpdev, dst);
> msg->reserved = 0;
> memcpy(msg->data, data, len);
>
> @@ -705,14 +714,15 @@ static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
> {
> struct rpmsg_endpoint *ept;
> struct scatterlist sg;
> - unsigned int msg_len = virtio16_to_cpu(vrp->vdev, msg->len);
> + bool little_endian = rpmsg_is_little_endian();
> + unsigned int msg_len = __rpmsg16_to_cpu(little_endian, msg->len);
> int err;
>
> dev_dbg(dev, "From: 0x%x, To: 0x%x, Len: %d, Flags: %d, Reserved: %d\n",
> - virtio32_to_cpu(vrp->vdev, msg->src),
> - virtio32_to_cpu(vrp->vdev, msg->dst), msg_len,
> - virtio16_to_cpu(vrp->vdev, msg->flags),
> - virtio32_to_cpu(vrp->vdev, msg->reserved));
> + __rpmsg32_to_cpu(little_endian, msg->src),
> + __rpmsg32_to_cpu(little_endian, msg->dst), msg_len,
> + __rpmsg16_to_cpu(little_endian, msg->flags),
> + __rpmsg32_to_cpu(little_endian, msg->reserved));
Nitpicking: sometime rpmsgXX_to_cpu is used, sometime __rpmsgXX_to_cpu,
Perhaps only one API should be used... But i don't see any blocking point to use both...:)
Thanks,
Arnaud
> #if defined(CONFIG_DYNAMIC_DEBUG)
> dynamic_hex_dump("rpmsg_virtio RX: ", DUMP_PREFIX_NONE, 16, 1,
> msg, sizeof(*msg) + msg_len, true);
> @@ -731,7 +741,7 @@ static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
> /* use the dst addr to fetch the callback of the appropriate user */
> mutex_lock(&vrp->endpoints_lock);
>
> - ept = idr_find(&vrp->endpoints, virtio32_to_cpu(vrp->vdev, msg->dst));
> + ept = idr_find(&vrp->endpoints, __rpmsg32_to_cpu(little_endian, msg->dst));
>
> /* let's make sure no one deallocates ept while we use it */
> if (ept)
> @@ -745,7 +755,7 @@ static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
>
> if (ept->cb)
> ept->cb(ept->rpdev, msg->data, msg_len, ept->priv,
> - virtio32_to_cpu(vrp->vdev, msg->src));
> + __rpmsg32_to_cpu(little_endian, msg->src));
>
> mutex_unlock(&ept->cb_lock);
>
> @@ -853,13 +863,13 @@ static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len,
>
> strncpy(chinfo.name, msg->name, sizeof(chinfo.name));
> chinfo.src = RPMSG_ADDR_ANY;
> - chinfo.dst = virtio32_to_cpu(vrp->vdev, msg->addr);
> + chinfo.dst = rpmsg32_to_cpu(rpdev, msg->addr);
>
> dev_info(dev, "%sing channel %s addr 0x%x\n",
> - virtio32_to_cpu(vrp->vdev, msg->flags) & RPMSG_NS_DESTROY ?
> + rpmsg32_to_cpu(rpdev, msg->flags) & RPMSG_NS_DESTROY ?
> "destroy" : "creat", msg->name, chinfo.dst);
>
> - if (virtio32_to_cpu(vrp->vdev, msg->flags) & RPMSG_NS_DESTROY) {
> + if (rpmsg32_to_cpu(rpdev, msg->flags) & RPMSG_NS_DESTROY) {
> ret = rpmsg_unregister_device(&vrp->vdev->dev, &chinfo);
> if (ret)
> dev_err(dev, "rpmsg_destroy_channel failed: %d\n", ret);
>
On Wed, Oct 14, 2020 at 07:04:32PM +0200, Arnaud POULIQUEN wrote:
>
>
> On 10/14/20 1:25 AM, Mathieu Poirier wrote:
> > Use rpmsg byte conversion functions in order for the RPMSG
> > headers and generic functions to be used by external entities.
> >
> > Signed-off-by: Mathieu Poirier <[email protected]>
> > ---
> > drivers/rpmsg/virtio_rpmsg_bus.c | 60 +++++++++++++++++++-------------
> > 1 file changed, 35 insertions(+), 25 deletions(-)
> >
> > diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
> > index 9006fc7f73d0..793fe924671f 100644
> > --- a/drivers/rpmsg/virtio_rpmsg_bus.c
> > +++ b/drivers/rpmsg/virtio_rpmsg_bus.c
> > @@ -19,11 +19,11 @@
> > #include <linux/mutex.h>
> > #include <linux/of_device.h>
> > #include <linux/rpmsg.h>
> > +#include <linux/rpmsg_byteorder.h>
> > #include <linux/scatterlist.h>
> > #include <linux/slab.h>
> > #include <linux/sched.h>
> > #include <linux/virtio.h>
> > -#include <linux/virtio_byteorder.h>
> > #include <linux/virtio_ids.h>
> > #include <linux/virtio_config.h>
> > #include <linux/wait.h>
> > @@ -85,11 +85,11 @@ struct virtproc_info {
> > * Every message sent(/received) on the rpmsg bus begins with this header.
> > */
> > struct rpmsg_hdr {
> > - __virtio32 src;
> > - __virtio32 dst;
> > - __virtio32 reserved;
> > - __virtio16 len;
> > - __virtio16 flags;
> > + __rpmsg32 src;
> > + __rpmsg32 dst;
> > + __rpmsg32 reserved;
> > + __rpmsg16 len;
> > + __rpmsg16 flags;
> > u8 data[];
> > } __packed;
> >
> > @@ -107,8 +107,8 @@ struct rpmsg_hdr {
> > */
> > struct rpmsg_ns_msg {
> > char name[RPMSG_NAME_SIZE];
> > - __virtio32 addr;
> > - __virtio32 flags;
> > + __rpmsg32 addr;
> > + __rpmsg32 flags;
> > } __packed;
> >
> > /**
> > @@ -280,6 +280,14 @@ static struct rpmsg_endpoint *__rpmsg_create_ept(struct virtproc_info *vrp,
> > return NULL;
> > }
> >
> > +static bool virtio_rpmsg_is_little_endian(struct rpmsg_device *rpdev)
> > +{
> > + struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
> > + struct virtproc_info *vrp = vch->vrp;
> > +
> > + return virtio_is_little_endian(vrp->vdev);
> > +}
>
> Regarding this i wonder if the endianess could not be a rpmsg_device field that would be set on
> __rpmsg_create_channel?
> I don't think that the endianess could change, so perhaps no need to call ops for each conversion
> using interface implemented in rpmsg.h...
That's a valid point - I certainly don't expect the endianness to change
dynamically.
> But perhaps I missed something?
>
> > +
> > static struct rpmsg_endpoint *virtio_rpmsg_create_ept(struct rpmsg_device *rpdev,
> > rpmsg_rx_cb_t cb,
> > void *priv,
> > @@ -336,8 +344,8 @@ static int virtio_rpmsg_announce_create(struct rpmsg_device *rpdev)
> > struct rpmsg_ns_msg nsm;
> >
> > strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE);
> > - nsm.addr = cpu_to_virtio32(vrp->vdev, rpdev->ept->addr);
> > - nsm.flags = cpu_to_virtio32(vrp->vdev, RPMSG_NS_CREATE);
> > + nsm.addr = cpu_to_rpmsg32(rpdev, rpdev->ept->addr);
> > + nsm.flags = cpu_to_rpmsg32(rpdev, RPMSG_NS_CREATE);
> >
> > err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
> > if (err)
> > @@ -360,8 +368,8 @@ static int virtio_rpmsg_announce_destroy(struct rpmsg_device *rpdev)
> > struct rpmsg_ns_msg nsm;
> >
> > strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE);
> > - nsm.addr = cpu_to_virtio32(vrp->vdev, rpdev->ept->addr);
> > - nsm.flags = cpu_to_virtio32(vrp->vdev, RPMSG_NS_DESTROY);
> > + nsm.addr = cpu_to_rpmsg32(rpdev, rpdev->ept->addr);
> > + nsm.flags = cpu_to_rpmsg32(rpdev, RPMSG_NS_DESTROY);
> >
> > err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
> > if (err)
> > @@ -372,6 +380,7 @@ static int virtio_rpmsg_announce_destroy(struct rpmsg_device *rpdev)
> > }
> >
> > static const struct rpmsg_device_ops virtio_rpmsg_ops = {
> > + .is_little_endian = virtio_rpmsg_is_little_endian,
> > .create_ept = virtio_rpmsg_create_ept,
> > .announce_create = virtio_rpmsg_announce_create,
> > .announce_destroy = virtio_rpmsg_announce_destroy,
> > @@ -613,10 +622,10 @@ static int rpmsg_send_offchannel_raw(struct rpmsg_device *rpdev,
> > }
> > }
> >
> > - msg->len = cpu_to_virtio16(vrp->vdev, len);
> > + msg->len = cpu_to_rpmsg16(rpdev, len);
> > msg->flags = 0;
> > - msg->src = cpu_to_virtio32(vrp->vdev, src);
> > - msg->dst = cpu_to_virtio32(vrp->vdev, dst);
> > + msg->src = cpu_to_rpmsg32(rpdev, src);
> > + msg->dst = cpu_to_rpmsg32(rpdev, dst);
> > msg->reserved = 0;
> > memcpy(msg->data, data, len);
> >
> > @@ -705,14 +714,15 @@ static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
> > {
> > struct rpmsg_endpoint *ept;
> > struct scatterlist sg;
> > - unsigned int msg_len = virtio16_to_cpu(vrp->vdev, msg->len);
> > + bool little_endian = rpmsg_is_little_endian();
> > + unsigned int msg_len = __rpmsg16_to_cpu(little_endian, msg->len);
> > int err;
> >
> > dev_dbg(dev, "From: 0x%x, To: 0x%x, Len: %d, Flags: %d, Reserved: %d\n",
> > - virtio32_to_cpu(vrp->vdev, msg->src),
> > - virtio32_to_cpu(vrp->vdev, msg->dst), msg_len,
> > - virtio16_to_cpu(vrp->vdev, msg->flags),
> > - virtio32_to_cpu(vrp->vdev, msg->reserved));
> > + __rpmsg32_to_cpu(little_endian, msg->src),
> > + __rpmsg32_to_cpu(little_endian, msg->dst), msg_len,
> > + __rpmsg16_to_cpu(little_endian, msg->flags),
> > + __rpmsg32_to_cpu(little_endian, msg->reserved));
>
> Nitpicking: sometime rpmsgXX_to_cpu is used, sometime __rpmsgXX_to_cpu,
> Perhaps only one API should be used... But i don't see any blocking point to use both...:)
Here we have to use __rpmsgXX_to_CPU() because the rpmsg_device is not
available. It could be fixed but would require a serious amount of refactoring
for little value. Moreover since this rpmsg_recv_single() is specific to the
virtIO implementation the end result is the same.
>
> Thanks,
> Arnaud
>
> > #if defined(CONFIG_DYNAMIC_DEBUG)
> > dynamic_hex_dump("rpmsg_virtio RX: ", DUMP_PREFIX_NONE, 16, 1,
> > msg, sizeof(*msg) + msg_len, true);
> > @@ -731,7 +741,7 @@ static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
> > /* use the dst addr to fetch the callback of the appropriate user */
> > mutex_lock(&vrp->endpoints_lock);
> >
> > - ept = idr_find(&vrp->endpoints, virtio32_to_cpu(vrp->vdev, msg->dst));
> > + ept = idr_find(&vrp->endpoints, __rpmsg32_to_cpu(little_endian, msg->dst));
> >
> > /* let's make sure no one deallocates ept while we use it */
> > if (ept)
> > @@ -745,7 +755,7 @@ static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
> >
> > if (ept->cb)
> > ept->cb(ept->rpdev, msg->data, msg_len, ept->priv,
> > - virtio32_to_cpu(vrp->vdev, msg->src));
> > + __rpmsg32_to_cpu(little_endian, msg->src));
> >
> > mutex_unlock(&ept->cb_lock);
> >
> > @@ -853,13 +863,13 @@ static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len,
> >
> > strncpy(chinfo.name, msg->name, sizeof(chinfo.name));
> > chinfo.src = RPMSG_ADDR_ANY;
> > - chinfo.dst = virtio32_to_cpu(vrp->vdev, msg->addr);
> > + chinfo.dst = rpmsg32_to_cpu(rpdev, msg->addr);
> >
> > dev_info(dev, "%sing channel %s addr 0x%x\n",
> > - virtio32_to_cpu(vrp->vdev, msg->flags) & RPMSG_NS_DESTROY ?
> > + rpmsg32_to_cpu(rpdev, msg->flags) & RPMSG_NS_DESTROY ?
> > "destroy" : "creat", msg->name, chinfo.dst);
> >
> > - if (virtio32_to_cpu(vrp->vdev, msg->flags) & RPMSG_NS_DESTROY) {
> > + if (rpmsg32_to_cpu(rpdev, msg->flags) & RPMSG_NS_DESTROY) {
> > ret = rpmsg_unregister_device(&vrp->vdev->dev, &chinfo);
> > if (ret)
> > dev_err(dev, "rpmsg_destroy_channel failed: %d\n", ret);
> >