Not all endpoints of camss have to be populated. In fact, most of the
time they shouldn't be as n-th auxilliary cameras are usually ewaste.
Don't fail probing the entire camss even even one endpoint is not
linked and throw an error when none is found.
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/media/platform/qcom/camss/camss.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 1ef26aea3eae..3aa03fbc94e2 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -1084,9 +1084,8 @@ static int camss_of_parse_ports(struct camss *camss)
remote = of_graph_get_remote_port_parent(node);
if (!remote) {
- dev_err(dev, "Cannot get remote parent\n");
- ret = -EINVAL;
- goto err_cleanup;
+ of_node_put(node);
+ continue;
}
csd = v4l2_async_nf_add_fwnode(&camss->notifier,
@@ -1105,7 +1104,7 @@ static int camss_of_parse_ports(struct camss *camss)
num_subdevs++;
}
- return num_subdevs;
+ return num_subdevs ? num_subdevs : -EINVAL;
err_cleanup:
of_node_put(node);
---
base-commit: b16049b21162bb649cdd8519642a35972b7910fe
change-id: 20230614-topic-camss_grpah-39f9a4f7420c
Best regards,
--
Konrad Dybcio <[email protected]>
On 14/06/2023 14:22, Konrad Dybcio wrote:
> Not all endpoints of camss have to be populated. In fact, most of the
> time they shouldn't be as n-th auxilliary cameras are usually ewaste.
>
> Don't fail probing the entire camss even even one endpoint is not
> linked and throw an error when none is found.
>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> drivers/media/platform/qcom/camss/camss.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
> index 1ef26aea3eae..3aa03fbc94e2 100644
> --- a/drivers/media/platform/qcom/camss/camss.c
> +++ b/drivers/media/platform/qcom/camss/camss.c
> @@ -1084,9 +1084,8 @@ static int camss_of_parse_ports(struct camss *camss)
>
> remote = of_graph_get_remote_port_parent(node);
> if (!remote) {
> - dev_err(dev, "Cannot get remote parent\n");
> - ret = -EINVAL;
> - goto err_cleanup;
> + of_node_put(node);
> + continue;
> }
>
> csd = v4l2_async_nf_add_fwnode(&camss->notifier,
> @@ -1105,7 +1104,7 @@ static int camss_of_parse_ports(struct camss *camss)
> num_subdevs++;
> }
>
> - return num_subdevs;
> + return num_subdevs ? num_subdevs : -EINVAL;
>
> err_cleanup:
> of_node_put(node);
>
> ---
> base-commit: b16049b21162bb649cdd8519642a35972b7910fe
> change-id: 20230614-topic-camss_grpah-39f9a4f7420c
>
> Best regards,
Can you give an example of the DT that is causing this ?
---
bod
On 14.06.2023 15:48, Bryan O'Donoghue wrote:
> On 14/06/2023 14:22, Konrad Dybcio wrote:
>> Not all endpoints of camss have to be populated. In fact, most of the
>> time they shouldn't be as n-th auxilliary cameras are usually ewaste.
>>
>> Don't fail probing the entire camss even even one endpoint is not
>> linked and throw an error when none is found.
>>
>> Signed-off-by: Konrad Dybcio <[email protected]>
>> ---
>> drivers/media/platform/qcom/camss/camss.c | 7 +++----
>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
>> index 1ef26aea3eae..3aa03fbc94e2 100644
>> --- a/drivers/media/platform/qcom/camss/camss.c
>> +++ b/drivers/media/platform/qcom/camss/camss.c
>> @@ -1084,9 +1084,8 @@ static int camss_of_parse_ports(struct camss *camss)
>> remote = of_graph_get_remote_port_parent(node);
>> if (!remote) {
>> - dev_err(dev, "Cannot get remote parent\n");
>> - ret = -EINVAL;
>> - goto err_cleanup;
>> + of_node_put(node);
>> + continue;
>> }
>> csd = v4l2_async_nf_add_fwnode(&camss->notifier,
>> @@ -1105,7 +1104,7 @@ static int camss_of_parse_ports(struct camss *camss)
>> num_subdevs++;
>> }
>> - return num_subdevs;
>> + return num_subdevs ? num_subdevs : -EINVAL;
>> err_cleanup:
>> of_node_put(node);
>>
>> ---
>> base-commit: b16049b21162bb649cdd8519642a35972b7910fe
>> change-id: 20230614-topic-camss_grpah-39f9a4f7420c
>>
>> Best regards,
>
> Can you give an example of the DT that is causing this ?
None upstream (8916 has a single port and 845c's sec camera has
never been enabled), but it's easy to spot if you leave csiphy0_ep
unoccupied and add something to csiphyN_ep for N>=1
Konrad
>
> ---
> bod
On 14/06/2023 14:50, Konrad Dybcio wrote:
> On 14.06.2023 15:48, Bryan O'Donoghue wrote:
>> On 14/06/2023 14:22, Konrad Dybcio wrote:
>>> Not all endpoints of camss have to be populated. In fact, most of the
>>> time they shouldn't be as n-th auxilliary cameras are usually ewaste.
>>>
>>> Don't fail probing the entire camss even even one endpoint is not
>>> linked and throw an error when none is found.
>>>
>>> Signed-off-by: Konrad Dybcio <[email protected]>
>>> ---
>>> drivers/media/platform/qcom/camss/camss.c | 7 +++----
>>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
>>> index 1ef26aea3eae..3aa03fbc94e2 100644
>>> --- a/drivers/media/platform/qcom/camss/camss.c
>>> +++ b/drivers/media/platform/qcom/camss/camss.c
>>> @@ -1084,9 +1084,8 @@ static int camss_of_parse_ports(struct camss *camss)
>>> remote = of_graph_get_remote_port_parent(node);
>>> if (!remote) {
>>> - dev_err(dev, "Cannot get remote parent\n");
>>> - ret = -EINVAL;
>>> - goto err_cleanup;
>>> + of_node_put(node);
>>> + continue;
>>> }
>>> csd = v4l2_async_nf_add_fwnode(&camss->notifier,
>>> @@ -1105,7 +1104,7 @@ static int camss_of_parse_ports(struct camss *camss)
>>> num_subdevs++;
>>> }
>>> - return num_subdevs;
>>> + return num_subdevs ? num_subdevs : -EINVAL;
Can you if/else this instead of the ?
Then add my Acked-by:
---
bod