mips_cm_error_report() extracts the cause and other cause from the error
register using shifts. This works fine for the former, as it is stored
in the top bits, and the shift will thus remove all non-related bits.
However, the latter is stored in the bottom bits, hence thus needs masking
to get rid of non-related bits. Without such masking, using it as an
index into the cm2_causes[] array will lead to an out-of-bounds access,
probably causing a crash.
Fix this by using FIELD_GET() instead. Bite the bullet and convert all
MIPS CM handling to the bitfield API, to improve readability and safety.
Fixes: 3885c2b463f6a236 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Geert Uytterhoeven <[email protected]>
---
Compile-tested only, but assembler output before/after compared.
---
arch/mips/include/asm/mips-cm.h | 12 ++++++------
arch/mips/kernel/mips-cm.c | 21 ++++++++++-----------
2 files changed, 16 insertions(+), 17 deletions(-)
diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index aeae2effa123d7e2..23c67c0871b17c91 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -11,6 +11,7 @@
#ifndef __MIPS_ASM_MIPS_CM_H__
#define __MIPS_ASM_MIPS_CM_H__
+#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/errno.h>
@@ -153,8 +154,8 @@ GCR_ACCESSOR_RO(32, 0x030, rev)
#define CM_GCR_REV_MINOR GENMASK(7, 0)
#define CM_ENCODE_REV(major, minor) \
- (((major) << __ffs(CM_GCR_REV_MAJOR)) | \
- ((minor) << __ffs(CM_GCR_REV_MINOR)))
+ (FIELD_PREP(CM_GCR_REV_MAJOR, major) | \
+ FIELD_PREP(CM_GCR_REV_MINOR, minor))
#define CM_REV_CM2 CM_ENCODE_REV(6, 0)
#define CM_REV_CM2_5 CM_ENCODE_REV(7, 0)
@@ -362,10 +363,10 @@ static inline int mips_cm_revision(void)
static inline unsigned int mips_cm_max_vp_width(void)
{
extern int smp_num_siblings;
- uint32_t cfg;
if (mips_cm_revision() >= CM_REV_CM3)
- return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW;
+ return FIELD_GET(CM_GCR_SYS_CONFIG2_MAXVPW,
+ read_gcr_sys_config2());
if (mips_cm_present()) {
/*
@@ -373,8 +374,7 @@ static inline unsigned int mips_cm_max_vp_width(void)
* number of VP(E)s, and if that ever changes then this will
* need revisiting.
*/
- cfg = read_gcr_cl_config() & CM_GCR_Cx_CONFIG_PVPE;
- return (cfg >> __ffs(CM_GCR_Cx_CONFIG_PVPE)) + 1;
+ return FIELD_GET(CM_GCR_Cx_CONFIG_PVPE, read_gcr_cl_config()) + 1;
}
if (IS_ENABLED(CONFIG_SMP))
diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
index 90f1c3df1f0e495e..b4f7d950c84680d3 100644
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -221,8 +221,7 @@ static void mips_cm_probe_l2sync(void)
phys_addr_t addr;
/* L2-only sync was introduced with CM major revision 6 */
- major_rev = (read_gcr_rev() & CM_GCR_REV_MAJOR) >>
- __ffs(CM_GCR_REV_MAJOR);
+ major_rev = FIELD_GET(CM_GCR_REV_MAJOR, read_gcr_rev());
if (major_rev < 6)
return;
@@ -306,13 +305,13 @@ void mips_cm_lock_other(unsigned int cluster, unsigned int core,
preempt_disable();
if (cm_rev >= CM_REV_CM3) {
- val = core << __ffs(CM3_GCR_Cx_OTHER_CORE);
- val |= vp << __ffs(CM3_GCR_Cx_OTHER_VP);
+ val = FIELD_PREP(CM3_GCR_Cx_OTHER_CORE, core) |
+ FIELD_PREP(CM3_GCR_Cx_OTHER_VP, vp);
if (cm_rev >= CM_REV_CM3_5) {
val |= CM_GCR_Cx_OTHER_CLUSTER_EN;
- val |= cluster << __ffs(CM_GCR_Cx_OTHER_CLUSTER);
- val |= block << __ffs(CM_GCR_Cx_OTHER_BLOCK);
+ val |= FIELD_PREP(CM_GCR_Cx_OTHER_CLUSTER, cluster);
+ val |= FIELD_PREP(CM_GCR_Cx_OTHER_BLOCK, block);
} else {
WARN_ON(cluster != 0);
WARN_ON(block != CM_GCR_Cx_OTHER_BLOCK_LOCAL);
@@ -342,7 +341,7 @@ void mips_cm_lock_other(unsigned int cluster, unsigned int core,
spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core),
per_cpu(cm_core_lock_flags, curr_core));
- val = core << __ffs(CM_GCR_Cx_OTHER_CORENUM);
+ val = FIELD_PREP(CM_GCR_Cx_OTHER_CORENUM, core);
}
write_gcr_cl_other(val);
@@ -386,8 +385,8 @@ void mips_cm_error_report(void)
cm_other = read_gcr_error_mult();
if (revision < CM_REV_CM3) { /* CM2 */
- cause = cm_error >> __ffs(CM_GCR_ERROR_CAUSE_ERRTYPE);
- ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
+ cause = FIELD_GET(CM_GCR_ERROR_CAUSE_ERRTYPE, cm_error);
+ ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other);
if (!cause)
return;
@@ -445,8 +444,8 @@ void mips_cm_error_report(void)
ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits;
ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit;
- cause = cm_error >> __ffs64(CM3_GCR_ERROR_CAUSE_ERRTYPE);
- ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
+ cause = FIELD_GET(CM3_GCR_ERROR_CAUSE_ERRTYPE, cm_error);
+ ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other);
if (!cause)
return;
--
2.25.1
在 2021/10/29 10:58, Geert Uytterhoeven 写道:
> mips_cm_error_report() extracts the cause and other cause from the error
> register using shifts. This works fine for the former, as it is stored
> in the top bits, and the shift will thus remove all non-related bits.
> However, the latter is stored in the bottom bits, hence thus needs masking
> to get rid of non-related bits. Without such masking, using it as an
> index into the cm2_causes[] array will lead to an out-of-bounds access,
> probably causing a crash.
>
> Fix this by using FIELD_GET() instead. Bite the bullet and convert all
> MIPS CM handling to the bitfield API, to improve readability and safety.
>
> Fixes: 3885c2b463f6a236 ("MIPS: CM: Add support for reporting CM cache errors")
> Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Jiaxun Yang <[email protected]>
> ---
> Compile-tested only, but assembler output before/after compared.
> ---
> arch/mips/include/asm/mips-cm.h | 12 ++++++------
> arch/mips/kernel/mips-cm.c | 21 ++++++++++-----------
> 2 files changed, 16 insertions(+), 17 deletions(-)
>
> diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
> index aeae2effa123d7e2..23c67c0871b17c91 100644
> --- a/arch/mips/include/asm/mips-cm.h
> +++ b/arch/mips/include/asm/mips-cm.h
> @@ -11,6 +11,7 @@
> #ifndef __MIPS_ASM_MIPS_CM_H__
> #define __MIPS_ASM_MIPS_CM_H__
>
> +#include <linux/bitfield.h>
> #include <linux/bitops.h>
> #include <linux/errno.h>
>
> @@ -153,8 +154,8 @@ GCR_ACCESSOR_RO(32, 0x030, rev)
> #define CM_GCR_REV_MINOR GENMASK(7, 0)
>
> #define CM_ENCODE_REV(major, minor) \
> - (((major) << __ffs(CM_GCR_REV_MAJOR)) | \
> - ((minor) << __ffs(CM_GCR_REV_MINOR)))
> + (FIELD_PREP(CM_GCR_REV_MAJOR, major) | \
> + FIELD_PREP(CM_GCR_REV_MINOR, minor))
>
> #define CM_REV_CM2 CM_ENCODE_REV(6, 0)
> #define CM_REV_CM2_5 CM_ENCODE_REV(7, 0)
> @@ -362,10 +363,10 @@ static inline int mips_cm_revision(void)
> static inline unsigned int mips_cm_max_vp_width(void)
> {
> extern int smp_num_siblings;
> - uint32_t cfg;
>
> if (mips_cm_revision() >= CM_REV_CM3)
> - return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW;
> + return FIELD_GET(CM_GCR_SYS_CONFIG2_MAXVPW,
> + read_gcr_sys_config2());
>
> if (mips_cm_present()) {
> /*
> @@ -373,8 +374,7 @@ static inline unsigned int mips_cm_max_vp_width(void)
> * number of VP(E)s, and if that ever changes then this will
> * need revisiting.
> */
> - cfg = read_gcr_cl_config() & CM_GCR_Cx_CONFIG_PVPE;
> - return (cfg >> __ffs(CM_GCR_Cx_CONFIG_PVPE)) + 1;
> + return FIELD_GET(CM_GCR_Cx_CONFIG_PVPE, read_gcr_cl_config()) + 1;
> }
>
> if (IS_ENABLED(CONFIG_SMP))
> diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
> index 90f1c3df1f0e495e..b4f7d950c84680d3 100644
> --- a/arch/mips/kernel/mips-cm.c
> +++ b/arch/mips/kernel/mips-cm.c
> @@ -221,8 +221,7 @@ static void mips_cm_probe_l2sync(void)
> phys_addr_t addr;
>
> /* L2-only sync was introduced with CM major revision 6 */
> - major_rev = (read_gcr_rev() & CM_GCR_REV_MAJOR) >>
> - __ffs(CM_GCR_REV_MAJOR);
> + major_rev = FIELD_GET(CM_GCR_REV_MAJOR, read_gcr_rev());
> if (major_rev < 6)
> return;
>
> @@ -306,13 +305,13 @@ void mips_cm_lock_other(unsigned int cluster, unsigned int core,
> preempt_disable();
>
> if (cm_rev >= CM_REV_CM3) {
> - val = core << __ffs(CM3_GCR_Cx_OTHER_CORE);
> - val |= vp << __ffs(CM3_GCR_Cx_OTHER_VP);
> + val = FIELD_PREP(CM3_GCR_Cx_OTHER_CORE, core) |
> + FIELD_PREP(CM3_GCR_Cx_OTHER_VP, vp);
>
> if (cm_rev >= CM_REV_CM3_5) {
> val |= CM_GCR_Cx_OTHER_CLUSTER_EN;
> - val |= cluster << __ffs(CM_GCR_Cx_OTHER_CLUSTER);
> - val |= block << __ffs(CM_GCR_Cx_OTHER_BLOCK);
> + val |= FIELD_PREP(CM_GCR_Cx_OTHER_CLUSTER, cluster);
> + val |= FIELD_PREP(CM_GCR_Cx_OTHER_BLOCK, block);
> } else {
> WARN_ON(cluster != 0);
> WARN_ON(block != CM_GCR_Cx_OTHER_BLOCK_LOCAL);
> @@ -342,7 +341,7 @@ void mips_cm_lock_other(unsigned int cluster, unsigned int core,
> spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core),
> per_cpu(cm_core_lock_flags, curr_core));
>
> - val = core << __ffs(CM_GCR_Cx_OTHER_CORENUM);
> + val = FIELD_PREP(CM_GCR_Cx_OTHER_CORENUM, core);
> }
>
> write_gcr_cl_other(val);
> @@ -386,8 +385,8 @@ void mips_cm_error_report(void)
> cm_other = read_gcr_error_mult();
>
> if (revision < CM_REV_CM3) { /* CM2 */
> - cause = cm_error >> __ffs(CM_GCR_ERROR_CAUSE_ERRTYPE);
> - ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
> + cause = FIELD_GET(CM_GCR_ERROR_CAUSE_ERRTYPE, cm_error);
> + ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other);
>
> if (!cause)
> return;
> @@ -445,8 +444,8 @@ void mips_cm_error_report(void)
> ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits;
> ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit;
>
> - cause = cm_error >> __ffs64(CM3_GCR_ERROR_CAUSE_ERRTYPE);
> - ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
> + cause = FIELD_GET(CM3_GCR_ERROR_CAUSE_ERRTYPE, cm_error);
> + ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other);
>
> if (!cause)
> return;
On Fri, Oct 29, 2021 at 11:58:16AM +0200, Geert Uytterhoeven wrote:
> mips_cm_error_report() extracts the cause and other cause from the error
> register using shifts. This works fine for the former, as it is stored
> in the top bits, and the shift will thus remove all non-related bits.
> However, the latter is stored in the bottom bits, hence thus needs masking
> to get rid of non-related bits. Without such masking, using it as an
> index into the cm2_causes[] array will lead to an out-of-bounds access,
> probably causing a crash.
>
> Fix this by using FIELD_GET() instead. Bite the bullet and convert all
> MIPS CM handling to the bitfield API, to improve readability and safety.
>
> Fixes: 3885c2b463f6a236 ("MIPS: CM: Add support for reporting CM cache errors")
> Signed-off-by: Geert Uytterhoeven <[email protected]>
> ---
> Compile-tested only, but assembler output before/after compared.
> ---
> arch/mips/include/asm/mips-cm.h | 12 ++++++------
> arch/mips/kernel/mips-cm.c | 21 ++++++++++-----------
> 2 files changed, 16 insertions(+), 17 deletions(-)
applied to mips-next.
Thomas.
--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]