From: Peng Fan <[email protected]>
Add i.MX8MP NoC node to make the interconnect i.MX8MP driver could work.
Currently dynamic frequency scaling of the i.MX8MP NoC has not been
supported, only NoC initial settings are configured by interconnect
driver.
Signed-off-by: Peng Fan <[email protected]>
---
V4:
Georgi has merged the V3 driver and bindings patches. So only resend
this patch. Per Georgi's comments:
- Drop syscon from compatbile
- Drop the header inclusion
Seems I not see this patch in patchwork or mailist, maybe sent failed.
So gave a resend of V4.
V3:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
I not list the full change log, since this is only a minor patch
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index eb2d516278eb..42ed8ee08548 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1019,6 +1019,27 @@ eqos: ethernet@30bf0000 {
};
};
+ noc: interconnect@32700000 {
+ compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc";
+ reg = <0x32700000 0x100000>;
+ clocks = <&clk IMX8MP_CLK_NOC>;
+ #interconnect-cells = <1>;
+
+ operating-points-v2 = <&noc_opp_table>;
+
+ noc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200M {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+
+ opp-1000M {
+ opp-hz = /bits/ 64 <1000000000>;
+ };
+ };
+ };
+
aips4: bus@32c00000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32c00000 0x400000>;
--
2.25.1
On 7.07.22 2:47, Peng Fan (OSS) wrote:
> From: Peng Fan <[email protected]>
>
> Add i.MX8MP NoC node to make the interconnect i.MX8MP driver could work.
> Currently dynamic frequency scaling of the i.MX8MP NoC has not been
> supported, only NoC initial settings are configured by interconnect
> driver.
>
> Signed-off-by: Peng Fan <[email protected]>
Looks good to me.
Acked-by: Georgi Djakov <[email protected]>
> ---
>
> V4:
> Georgi has merged the V3 driver and bindings patches. So only resend
> this patch. Per Georgi's comments:
> - Drop syscon from compatbile
> - Drop the header inclusion
>
> Seems I not see this patch in patchwork or mailist, maybe sent failed.
> So gave a resend of V4.
>
> V3:
> https://lore.kernel.org/linux-arm-kernel/[email protected]/
>
> I not list the full change log, since this is only a minor patch
>
> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index eb2d516278eb..42ed8ee08548 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1019,6 +1019,27 @@ eqos: ethernet@30bf0000 {
> };
> };
>
> + noc: interconnect@32700000 {
> + compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc";
> + reg = <0x32700000 0x100000>;
> + clocks = <&clk IMX8MP_CLK_NOC>;
> + #interconnect-cells = <1>;
> +
> + operating-points-v2 = <&noc_opp_table>;
> +
> + noc_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-200M {
> + opp-hz = /bits/ 64 <200000000>;
> + };
> +
> + opp-1000M {
> + opp-hz = /bits/ 64 <1000000000>;
> + };
> + };
> + };
> +
> aips4: bus@32c00000 {
> compatible = "fsl,aips-bus", "simple-bus";
> reg = <0x32c00000 0x400000>;
On Thu, Jul 07, 2022 at 07:47:57AM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <[email protected]>
>
> Add i.MX8MP NoC node to make the interconnect i.MX8MP driver could work.
> Currently dynamic frequency scaling of the i.MX8MP NoC has not been
> supported, only NoC initial settings are configured by interconnect
> driver.
>
> Signed-off-by: Peng Fan <[email protected]>
> ---
>
> V4:
> Georgi has merged the V3 driver and bindings patches. So only resend
> this patch. Per Georgi's comments:
> - Drop syscon from compatbile
> - Drop the header inclusion
>
> Seems I not see this patch in patchwork or mailist, maybe sent failed.
> So gave a resend of V4.
>
> V3:
> https://lore.kernel.org/linux-arm-kernel/[email protected]/
>
> I not list the full change log, since this is only a minor patch
>
> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index eb2d516278eb..42ed8ee08548 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1019,6 +1019,27 @@ eqos: ethernet@30bf0000 {
> };
> };
>
> + noc: interconnect@32700000 {
> + compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc";
> + reg = <0x32700000 0x100000>;
> + clocks = <&clk IMX8MP_CLK_NOC>;
> + #interconnect-cells = <1>;
> +
This newline is not really necessary. Dropped it and applied patch.
Shawn
> + operating-points-v2 = <&noc_opp_table>;
> +
> + noc_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-200M {
> + opp-hz = /bits/ 64 <200000000>;
> + };
> +
> + opp-1000M {
> + opp-hz = /bits/ 64 <1000000000>;
> + };
> + };
> + };
> +
> aips4: bus@32c00000 {
> compatible = "fsl,aips-bus", "simple-bus";
> reg = <0x32c00000 0x400000>;
> --
> 2.25.1
>