The device property API allows drivers to gather device resources from
different sources, such as ACPI, and lift the dependency on Device Tree.
Convert the driver to unleash the power of the device property API.
Suggested-by: Marek Behún <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
---
Compile-tested only for the !OF case.
This depends on "[PATCH v6 00/19] auxdisplay: ht16k33: Add character display
support"
(https://lore.kernel.org/r/[email protected])
drivers/auxdisplay/Kconfig | 2 +-
drivers/auxdisplay/ht16k33.c | 25 +++++++++++--------------
2 files changed, 12 insertions(+), 15 deletions(-)
diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index e32ef7f9945d49b2..64012cda4d126707 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -169,7 +169,7 @@ config IMG_ASCII_LCD
config HT16K33
tristate "Holtek Ht16K33 LED controller with keyscan"
- depends on FB && OF && I2C && INPUT
+ depends on FB && I2C && INPUT
select FB_SYS_FOPS
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c
index 89ee5b4b3dfccb68..e5b810e37e0337a6 100644
--- a/drivers/auxdisplay/ht16k33.c
+++ b/drivers/auxdisplay/ht16k33.c
@@ -12,7 +12,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
-#include <linux/of.h>
+#include <linux/property.h>
#include <linux/fb.h>
#include <linux/slab.h>
#include <linux/backlight.h>
@@ -481,15 +481,13 @@ static int ht16k33_led_probe(struct device *dev, struct led_classdev *led,
unsigned int brightness)
{
struct led_init_data init_data = {};
- struct device_node *node;
int err;
/* The LED is optional */
- node = of_get_child_by_name(dev->of_node, "led");
- if (!node)
+ init_data.fwnode = device_get_named_child_node(dev, "led");
+ if (!init_data.fwnode)
return 0;
- init_data.fwnode = of_fwnode_handle(node);
init_data.devicename = "auxdisplay";
init_data.devname_mandatory = true;
@@ -510,7 +508,6 @@ static int ht16k33_keypad_probe(struct i2c_client *client,
struct ht16k33_keypad *keypad)
{
struct device *dev = &client->dev;
- struct device_node *node = dev->of_node;
u32 rows = HT16K33_MATRIX_KEYPAD_MAX_ROWS;
u32 cols = HT16K33_MATRIX_KEYPAD_MAX_COLS;
int err;
@@ -529,11 +526,11 @@ static int ht16k33_keypad_probe(struct i2c_client *client,
keypad->dev->open = ht16k33_keypad_start;
keypad->dev->close = ht16k33_keypad_stop;
- if (!of_get_property(node, "linux,no-autorepeat", NULL))
+ if (!device_property_present(dev, "linux,no-autorepeat"))
__set_bit(EV_REP, keypad->dev->evbit);
- err = of_property_read_u32(node, "debounce-delay-ms",
- &keypad->debounce_ms);
+ err = device_property_read_u32(dev, "debounce-delay-ms",
+ &keypad->debounce_ms);
if (err) {
dev_err(dev, "key debounce delay not specified\n");
return err;
@@ -620,8 +617,8 @@ static int ht16k33_fbdev_probe(struct device *dev, struct ht16k33_priv *priv,
goto err_fbdev_buffer;
}
- err = of_property_read_u32(dev->of_node, "refresh-rate-hz",
- &fbdev->refresh_rate);
+ err = device_property_read_u32(dev, "refresh-rate-hz",
+ &fbdev->refresh_rate);
if (err) {
dev_err(dev, "refresh rate not specified\n");
goto err_fbdev_info;
@@ -727,8 +724,8 @@ static int ht16k33_probe(struct i2c_client *client)
if (err)
return err;
- err = of_property_read_u32(dev->of_node, "default-brightness-level",
- &dft_brightness);
+ err = device_property_read_u32(dev, "default-brightness-level",
+ &dft_brightness);
if (err) {
dft_brightness = MAX_BRIGHTNESS;
} else if (dft_brightness > MAX_BRIGHTNESS) {
@@ -816,7 +813,7 @@ static struct i2c_driver ht16k33_driver = {
.remove = ht16k33_remove,
.driver = {
.name = DRIVER_NAME,
- .of_match_table = of_match_ptr(ht16k33_of_match),
+ .of_match_table = ht16k33_of_match,
},
.id_table = ht16k33_i2c_match,
};
--
2.25.1
On Tue, Sep 14, 2021 at 5:42 PM Geert Uytterhoeven <[email protected]> wrote:
>
> The device property API allows drivers to gather device resources from
> different sources, such as ACPI, and lift the dependency on Device Tree.
> Convert the driver to unleash the power of the device property API.
With or without the nit-pick below
Reviewed-by: Andy Shevchenko <[email protected]>
> Suggested-by: Marek Behún <[email protected]>
> Signed-off-by: Geert Uytterhoeven <[email protected]>
> ---
> Compile-tested only for the !OF case.
>
> This depends on "[PATCH v6 00/19] auxdisplay: ht16k33: Add character display
> support"
> (https://lore.kernel.org/r/[email protected])
>
> drivers/auxdisplay/Kconfig | 2 +-
> drivers/auxdisplay/ht16k33.c | 25 +++++++++++--------------
> 2 files changed, 12 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
> index e32ef7f9945d49b2..64012cda4d126707 100644
> --- a/drivers/auxdisplay/Kconfig
> +++ b/drivers/auxdisplay/Kconfig
> @@ -169,7 +169,7 @@ config IMG_ASCII_LCD
>
> config HT16K33
> tristate "Holtek Ht16K33 LED controller with keyscan"
> - depends on FB && OF && I2C && INPUT
> + depends on FB && I2C && INPUT
> select FB_SYS_FOPS
> select FB_SYS_FILLRECT
> select FB_SYS_COPYAREA
> diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c
> index 89ee5b4b3dfccb68..e5b810e37e0337a6 100644
> --- a/drivers/auxdisplay/ht16k33.c
> +++ b/drivers/auxdisplay/ht16k33.c
> @@ -12,7 +12,7 @@
> #include <linux/module.h>
> #include <linux/interrupt.h>
> #include <linux/i2c.h>
> -#include <linux/of.h>
> +#include <linux/property.h>
> #include <linux/fb.h>
> #include <linux/slab.h>
> #include <linux/backlight.h>
> @@ -481,15 +481,13 @@ static int ht16k33_led_probe(struct device *dev, struct led_classdev *led,
> unsigned int brightness)
> {
> struct led_init_data init_data = {};
> - struct device_node *node;
> int err;
>
> /* The LED is optional */
> - node = of_get_child_by_name(dev->of_node, "led");
> - if (!node)
> + init_data.fwnode = device_get_named_child_node(dev, "led");
> + if (!init_data.fwnode)
> return 0;
>
> - init_data.fwnode = of_fwnode_handle(node);
> init_data.devicename = "auxdisplay";
> init_data.devname_mandatory = true;
>
> @@ -510,7 +508,6 @@ static int ht16k33_keypad_probe(struct i2c_client *client,
> struct ht16k33_keypad *keypad)
> {
> struct device *dev = &client->dev;
> - struct device_node *node = dev->of_node;
> u32 rows = HT16K33_MATRIX_KEYPAD_MAX_ROWS;
> u32 cols = HT16K33_MATRIX_KEYPAD_MAX_COLS;
> int err;
> @@ -529,11 +526,11 @@ static int ht16k33_keypad_probe(struct i2c_client *client,
> keypad->dev->open = ht16k33_keypad_start;
> keypad->dev->close = ht16k33_keypad_stop;
>
> - if (!of_get_property(node, "linux,no-autorepeat", NULL))
> + if (!device_property_present(dev, "linux,no-autorepeat"))
If it's boolean property one may use device_property_read_bool()...
> __set_bit(EV_REP, keypad->dev->evbit);
...or put it as a parameter to __assign_bit(), for example.
>
> - err = of_property_read_u32(node, "debounce-delay-ms",
> - &keypad->debounce_ms);
> + err = device_property_read_u32(dev, "debounce-delay-ms",
> + &keypad->debounce_ms);
> if (err) {
> dev_err(dev, "key debounce delay not specified\n");
> return err;
> @@ -620,8 +617,8 @@ static int ht16k33_fbdev_probe(struct device *dev, struct ht16k33_priv *priv,
> goto err_fbdev_buffer;
> }
>
> - err = of_property_read_u32(dev->of_node, "refresh-rate-hz",
> - &fbdev->refresh_rate);
> + err = device_property_read_u32(dev, "refresh-rate-hz",
> + &fbdev->refresh_rate);
> if (err) {
> dev_err(dev, "refresh rate not specified\n");
> goto err_fbdev_info;
> @@ -727,8 +724,8 @@ static int ht16k33_probe(struct i2c_client *client)
> if (err)
> return err;
>
> - err = of_property_read_u32(dev->of_node, "default-brightness-level",
> - &dft_brightness);
> + err = device_property_read_u32(dev, "default-brightness-level",
> + &dft_brightness);
> if (err) {
> dft_brightness = MAX_BRIGHTNESS;
> } else if (dft_brightness > MAX_BRIGHTNESS) {
> @@ -816,7 +813,7 @@ static struct i2c_driver ht16k33_driver = {
> .remove = ht16k33_remove,
> .driver = {
> .name = DRIVER_NAME,
> - .of_match_table = of_match_ptr(ht16k33_of_match),
> + .of_match_table = ht16k33_of_match,
> },
> .id_table = ht16k33_i2c_match,
> };
> --
> 2.25.1
>
--
With Best Regards,
Andy Shevchenko
Hi Geert,
As part of this change let's rename matrix_keypad_parse_of_params() to
matrix_keypad_parse_properties() as well.
- Robin
On 2021-09-14 16:42, Geert Uytterhoeven wrote:
> The device property API allows drivers to gather device resources from
> different sources, such as ACPI, and lift the dependency on Device Tree.
> Convert the driver to unleash the power of the device property API.
>
> Suggested-by: Marek Behún <[email protected]>
> Signed-off-by: Geert Uytterhoeven <[email protected]>
> ---
> Compile-tested only for the !OF case.
>
> This depends on "[PATCH v6 00/19] auxdisplay: ht16k33: Add character display
> support"
> (https://lore.kernel.org/r/[email protected])
>
> drivers/auxdisplay/Kconfig | 2 +-
> drivers/auxdisplay/ht16k33.c | 25 +++++++++++--------------
> 2 files changed, 12 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
> index e32ef7f9945d49b2..64012cda4d126707 100644
> --- a/drivers/auxdisplay/Kconfig
> +++ b/drivers/auxdisplay/Kconfig
> @@ -169,7 +169,7 @@ config IMG_ASCII_LCD
>
> config HT16K33
> tristate "Holtek Ht16K33 LED controller with keyscan"
> - depends on FB && OF && I2C && INPUT
> + depends on FB && I2C && INPUT
> select FB_SYS_FOPS
> select FB_SYS_FILLRECT
> select FB_SYS_COPYAREA
> diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c
> index 89ee5b4b3dfccb68..e5b810e37e0337a6 100644
> --- a/drivers/auxdisplay/ht16k33.c
> +++ b/drivers/auxdisplay/ht16k33.c
> @@ -12,7 +12,7 @@
> #include <linux/module.h>
> #include <linux/interrupt.h>
> #include <linux/i2c.h>
> -#include <linux/of.h>
> +#include <linux/property.h>
> #include <linux/fb.h>
> #include <linux/slab.h>
> #include <linux/backlight.h>
> @@ -481,15 +481,13 @@ static int ht16k33_led_probe(struct device *dev,
> struct
> led_classdev *led,
> unsigned int brightness)
> {
> struct led_init_data init_data = {};
> - struct device_node *node;
> int err;
>
> /* The LED is optional */
> - node = of_get_child_by_name(dev->of_node, "led");
> - if (!node)
> + init_data.fwnode = device_get_named_child_node(dev, "led");
> + if (!init_data.fwnode)
> return 0;
>
> - init_data.fwnode = of_fwnode_handle(node);
> init_data.devicename = "auxdisplay";
> init_data.devname_mandatory = true;
>
> @@ -510,7 +508,6 @@ static int ht16k33_keypad_probe(struct i2c_client
> *client,
> struct ht16k33_keypad *keypad)
> {
> struct device *dev = &client->dev;
> - struct device_node *node = dev->of_node;
> u32 rows = HT16K33_MATRIX_KEYPAD_MAX_ROWS;
> u32 cols = HT16K33_MATRIX_KEYPAD_MAX_COLS;
> int err;
> @@ -529,11 +526,11 @@ static int ht16k33_keypad_probe(struct i2c_client
> *client,
> keypad->dev->open = ht16k33_keypad_start;
> keypad->dev->close = ht16k33_keypad_stop;
>
> - if (!of_get_property(node, "linux,no-autorepeat", NULL))
> + if (!device_property_present(dev, "linux,no-autorepeat"))
> __set_bit(EV_REP, keypad->dev->evbit);
>
> - err = of_property_read_u32(node, "debounce-delay-ms",
> - &keypad->debounce_ms);
> + err = device_property_read_u32(dev, "debounce-delay-ms",
> + &keypad->debounce_ms);
> if (err) {
> dev_err(dev, "key debounce delay not specified\n");
> return err;
> @@ -620,8 +617,8 @@ static int ht16k33_fbdev_probe(struct device *dev,
> struct
> ht16k33_priv *priv,
> goto err_fbdev_buffer;
> }
>
> - err = of_property_read_u32(dev->of_node, "refresh-rate-hz",
> - &fbdev->refresh_rate);
> + err = device_property_read_u32(dev, "refresh-rate-hz",
> + &fbdev->refresh_rate);
> if (err) {
> dev_err(dev, "refresh rate not specified\n");
> goto err_fbdev_info;
> @@ -727,8 +724,8 @@ static int ht16k33_probe(struct i2c_client *client)
> if (err)
> return err;
>
> - err = of_property_read_u32(dev->of_node, "default-brightness-level",
> - &dft_brightness);
> + err = device_property_read_u32(dev, "default-brightness-level",
> + &dft_brightness);
> if (err) {
> dft_brightness = MAX_BRIGHTNESS;
> } else if (dft_brightness > MAX_BRIGHTNESS) {
> @@ -816,7 +813,7 @@ static struct i2c_driver ht16k33_driver = {
> .remove = ht16k33_remove,
> .driver = {
> .name = DRIVER_NAME,
> - .of_match_table = of_match_ptr(ht16k33_of_match),
> + .of_match_table = ht16k33_of_match,
> },
> .id_table = ht16k33_i2c_match,
> };