2023-08-10 11:00:36

by Varadarajan Narayanan

Subject: [PATCH v7 3/5] arm64: dts: qcom: ipq5332: Add USB related nodes

Add USB phy and controller nodes.

Signed-off-by: Varadarajan Narayanan <[email protected]>
---
v6:
Remove clock names
Move the nodes to address sorted location
v5:
Use generic phy instead of usb-phy
'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom dtbs_check' passed
'DT_CHECKER_FLAGS='-v -m' DT_SCHEMA_FILES=qcom dt_binding_check' passed
v4:
Change node name
Remove blank line
'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom qcom/ipq5332-rdp441.dtb' passed
v1:
Rename phy node
Change compatible from m31,ipq5332-usb-hsphy -> qcom,ipq5332-usb-hsphy
Remove 'qscratch' from phy node
Fix alignment and upper-case hex no.s
Add clock definition for the phy
Remove snps,ref-clock-period-ns as it is not used. dwc3_ref_clk_period()
in dwc3/core.c takes the frequency from ref clock and calculates fladj
as appropriate.
---
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 55 +++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 8bfc2db..c45d9d4 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -145,6 +145,19 @@
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;

+ usbphy0: phy@7b000 {
+ compatible = "qcom,ipq5332-usb-hsphy";
+ reg = <0x0007b000 0x12c>;
+
+ clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+
+ resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
qfprom: efuse@a4000 {
compatible = "qcom,ipq5332-qfprom", "qcom,qfprom";
reg = <0x000a4000 0x721>;
@@ -290,6 +303,48 @@
status = "disabled";
};

+ usb: usb2@8a00000 {
+ compatible = "qcom,ipq5332-dwc3", "qcom,dwc3";
+ reg = <0x08af8800 0x400>;
+
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq";
+
+ clocks = <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_SNOC_USB_CLK>,
+ <&gcc GCC_USB0_SLEEP_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "core",
+ "iface",
+ "sleep",
+ "mock_utmi";
+
+ resets = <&gcc GCC_USB_BCR>;
+
+ qcom,select-utmi-as-pipe-clk;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ status = "disabled";
+
+ usb2_0_dwc: usb@8a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x08a00000 0xe000>;
+ clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "ref";
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ phy-names = "usb2-phy";
+ phys = <&usbphy0>;
+ tx-fifo-resize;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
reg = <0x0b000000 0x1000>, /* GICD */
--
2.7.4

2023-08-14 10:38:46

by Krzysztof Kozlowski

Subject: Re: [PATCH v7 3/5] arm64: dts: qcom: ipq5332: Add USB related nodes

On 10/08/2023 11:56, Varadarajan Narayanan wrote:
> Add USB phy and controller nodes.
>
> Signed-off-by: Varadarajan Narayanan <[email protected]>
> ---
> v6:
> Remove clock names
> Move the nodes to address sorted location
> v5:
> Use generic phy instead of usb-phy
> 'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom dtbs_check' passed
> 'DT_CHECKER_FLAGS='-v -m' DT_SCHEMA_FILES=qcom dt_binding_check' passed
> v4:
> Change node name
> Remove blank line
> 'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom qcom/ipq5332-rdp441.dtb' passed
> v1:
> Rename phy node
> Change compatible from m31,ipq5332-usb-hsphy -> qcom,ipq5332-usb-hsphy
> Remove 'qscratch' from phy node
> Fix alignment and upper-case hex no.s
> Add clock definition for the phy
> Remove snps,ref-clock-period-ns as it is not used. dwc3_ref_clk_period()
> in dwc3/core.c takes the frequency from ref clock and calculates fladj
> as appropriate.
> ---
> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 55 +++++++++++++++++++++++++++++++++++
> 1 file changed, 55 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> index 8bfc2db..c45d9d4 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -145,6 +145,19 @@
> #size-cells = <1>;
> ranges = <0 0 0 0xffffffff>;
>
> + usbphy0: phy@7b000 {
> + compatible = "qcom,ipq5332-usb-hsphy";
> + reg = <0x0007b000 0x12c>;
> +
> + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
> +
> + resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> +
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> qfprom: efuse@a4000 {
> compatible = "qcom,ipq5332-qfprom", "qcom,qfprom";
> reg = <0x000a4000 0x721>;
> @@ -290,6 +303,48 @@
> status = "disabled";
> };
>
> + usb: usb2@8a00000 {

usb@

Node names must be generic.

> + compatible = "qcom,ipq5332-dwc3", "qcom,dwc3";
> + reg = <0x08af8800 0x400>;

OK, so this was not really checked for any warnings.

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).


Best regards,
Krzysztof