On 2023-09-27 09:55, Niklas Schnelle wrote:
> On Tue, 2023-09-26 at 13:08 -0300, Jason Gunthorpe wrote:
>> On Tue, Sep 26, 2023 at 05:04:28PM +0200, Joerg Roedel wrote:
>>> Hi Niklas,
>>>
>>> On Fri, Aug 25, 2023 at 12:11:15PM +0200, Niklas Schnelle wrote:
>>>> Niklas Schnelle (6):
>>>> iommu: Allow .iotlb_sync_map to fail and handle s390's -ENOMEM return
>>>> s390/pci: prepare is_passed_through() for dma-iommu
>>>> s390/pci: Use dma-iommu layer
>>>> iommu/s390: Disable deferred flush for ISM devices
>>>> iommu/dma: Allow a single FQ in addition to per-CPU FQs
>>>> iommu/dma: Use a large flush queue and timeout for shadow_on_flush
>>>
>>> Turned out this series has non-trivial conflicts with Jasons
>>> default-domain work so I had to remove it from the IOMMU tree for now.
>>> Can you please rebase it to the latest iommu/core branch and re-send? I
>>> will take it into the tree again then.
>>
>> Niklas, I think you just 'take yours' to resolve this. All the
>> IOMMU_DOMAIN_PLATFORM related and .default_domain = parts should be
>> removed. Let me know if you need anything
>>
>> Thanks,
>> Jason
>
> Hi Joerg, Hi Jason,
>
> I've run into an unfortunate problem, not with the rebase itself but
> with the iommu/core branch.
>
> Jason is right, I basically need to just remove the platform ops and
> .default_domain ops. This seems to work fine for an NVMe both in the
> host and also when using the IOMMU with vfio-pci + KVM. I've already
> pushed the result of that to my git.kernel.org:
> https://git.kernel.org/pub/scm/linux/kernel/git/niks/linux.git/log/?h=b4/dma_iommu
>
> The problem is that something seems to be broken in the iommu/core
> branch. Regardless of whether I have my DMA API conversion on top or
> with the base iommu/core branch I can not use ConnectX-4 VFs.
>
> # lspci
> 111a:00:00.0 Ethernet controller: Mellanox Technologies MT27710 Family [ConnectX-4 Lx Virtual Function]
> # dmesg | grep mlx
> [ 3.189749] mlx5_core 111a:00:00.0: mlx5_mdev_init:1802:(pid 464): Failed initializing cmdif SW structs, aborting
> [ 3.189783] mlx5_core: probe of 111a:00:00.0 failed with error -12
>
> This same card works on v6.6-rc3 both with and without my DMA API
> conversion patch series applied. Looking at mlx5_mdev_init() ->
> mlx5_cmd_init(). The -ENOMEM seems to come from the following
> dma_pool_create():
>
> cmd->pool = dma_pool_create("mlx5_cmd", mlx5_core_dma_dev(dev), size, align, 0);
>
> I'll try to debug this further but wanted to let you know already in
> case you have some ideas.
I could imagine that potentially something in the initial default domain
conversion somehow interferes with the DMA ops in a way that ends up
causing alloc_cmd_page() to fail (maybe calling zpci_dma_init_device()
at the wrong point, or too many times?). FWIW I see nothing that would
obviously affect dma_pool_create() itself.
Robin.
> Either way as it doesn't seem to be related
> to the DMA API conversion I can sent that out again regardless if you
> want, really don't want to miss another cycle.
>
> Thanks,
> Niklas