2023-11-21 06:17:40

by Claudiu

Subject: [PATCH 01/13] net: ravb: Check return value of reset_control_deassert()

From: Claudiu Beznea <[email protected]>

reset_control_deassert() could return an error. Some devices cannot work
if reset signal de-assert operation fails. To avoid this check the return
code of reset_control_deassert() in ravb_probe() and take proper action.

Fixes: 0d13a1a464a0 ("ravb: Add reset support")
Signed-off-by: Claudiu Beznea <[email protected]>
---
drivers/net/ethernet/renesas/ravb_main.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index c70cff80cc99..342978bdbd7e 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -2645,7 +2645,12 @@ static int ravb_probe(struct platform_device *pdev)
ndev->features = info->net_features;
ndev->hw_features = info->net_hw_features;

- reset_control_deassert(rstc);
+ error = reset_control_deassert(rstc);
+ if (error) {
+ free_netdev(ndev);
+ return error;
+ }
+
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);

--
2.39.2

2023-11-24 19:04:43

by Sergey Shtylyov

Subject: Re: [PATCH 01/13] net: ravb: Check return value of reset_control_deassert()

On 11/21/23 8:59 AM, claudiu beznea wrote:

[...]
>>> From: Claudiu Beznea <[email protected]>
>>>
>>> reset_control_deassert() could return an error. Some devices cannot work
>>> if reset signal de-assert operation fails. To avoid this check the return
>>> code of reset_control_deassert() in ravb_probe() and take proper action.
>>>
>>> Fixes: 0d13a1a464a0 ("ravb: Add reset support")
>>> Signed-off-by: Claudiu Beznea <[email protected]>
>>> ---
>>> drivers/net/ethernet/renesas/ravb_main.c | 7 ++++++-
>>> 1 file changed, 6 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
>>> index c70cff80cc99..342978bdbd7e 100644
>>> --- a/drivers/net/ethernet/renesas/ravb_main.c
>>> +++ b/drivers/net/ethernet/renesas/ravb_main.c
>>> @@ -2645,7 +2645,12 @@ static int ravb_probe(struct platform_device *pdev)
>>> ndev->features = info->net_features;
>>> ndev->hw_features = info->net_hw_features;
>>>
>>> - reset_control_deassert(rstc);
>>> + error = reset_control_deassert(rstc);
>>> + if (error) {
>>> + free_netdev(ndev);
>>> + return error;
>>
>> No, please use *goto* here. And please fix up the order of statements under
>> the out_release label before doing that.
>
> This will lead to a bit more complicated patch, AFAICT. I tried to keep it

It's OK! :-)

> simple for a fix. Same thing for patch 2.

Patch 2 is not as simple as it could have been...

[...]

MBR, Sergey