The idea behind iop_preinit() was to put the SCC IOP into bypass mode.
However, that remains unimplemented and implementing it would be
difficult. Let the comments and code reflect this. Even if iop_preinit()
worked as described in the comments, it gets called immediately before
iop_init() so it might as well part of iop_init().
Cc: Joshua Thompson <[email protected]>
Tested-by: Stan Johnson <[email protected]>
Signed-off-by: Finn Thain <[email protected]>
---
arch/m68k/mac/config.c | 8 -------
arch/m68k/mac/iop.c | 54 ++++++++++++++----------------------------
2 files changed, 18 insertions(+), 44 deletions(-)
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 2bea1799b8de..f66944909be9 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -55,7 +55,6 @@ struct mac_booter_data mac_bi_data;
static unsigned long mac_orig_videoaddr;
extern int mac_hwclk(int, struct rtc_time *);
-extern void iop_preinit(void);
extern void iop_init(void);
extern void via_init(void);
extern void via_init_clock(irq_handler_t func);
@@ -836,13 +835,6 @@ static void __init mac_identify(void)
break;
}
- /*
- * We need to pre-init the IOPs, if any. Otherwise
- * the serial console won't work if the user had
- * the serial ports set to "Faster" mode in MacOS.
- */
- iop_preinit();
-
pr_info("Detected Macintosh model: %d\n", model);
/*
diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c
index c669a7644301..de156a027f5b 100644
--- a/arch/m68k/mac/iop.c
+++ b/arch/m68k/mac/iop.c
@@ -47,6 +47,10 @@
*
* TODO:
*
+ * o The SCC IOP has to be placed in bypass mode before the serial console
+ * gets initialized. iop_init() would be one place to do that. Or the
+ * bootloader could do that. For now, the Serial Switch control panel
+ * is needed for that -- contrary to the changelog above.
* o Something should be periodically checking iop_alive() to make sure the
* IOP hasn't died.
* o Some of the IOP manager routines need better error checking and
@@ -224,40 +228,6 @@ static struct iop_msg *iop_get_unused_msg(void)
return NULL;
}
-/*
- * This is called by the startup code before anything else. Its purpose
- * is to find and initialize the IOPs early in the boot sequence, so that
- * the serial IOP can be placed into bypass mode _before_ we try to
- * initialize the serial console.
- */
-
-void __init iop_preinit(void)
-{
- if (macintosh_config->scc_type == MAC_SCC_IOP) {
- if (macintosh_config->ident == MAC_MODEL_IIFX) {
- iop_base[IOP_NUM_SCC] = (struct mac_iop *) SCC_IOP_BASE_IIFX;
- } else {
- iop_base[IOP_NUM_SCC] = (struct mac_iop *) SCC_IOP_BASE_QUADRA;
- }
- iop_scc_present = 1;
- } else {
- iop_base[IOP_NUM_SCC] = NULL;
- iop_scc_present = 0;
- }
- if (macintosh_config->adb_type == MAC_ADB_IOP) {
- if (macintosh_config->ident == MAC_MODEL_IIFX) {
- iop_base[IOP_NUM_ISM] = (struct mac_iop *) ISM_IOP_BASE_IIFX;
- } else {
- iop_base[IOP_NUM_ISM] = (struct mac_iop *) ISM_IOP_BASE_QUADRA;
- }
- iop_stop(iop_base[IOP_NUM_ISM]);
- iop_ism_present = 1;
- } else {
- iop_base[IOP_NUM_ISM] = NULL;
- iop_ism_present = 0;
- }
-}
-
/*
* Initialize the IOPs, if present.
*/
@@ -266,11 +236,23 @@ void __init iop_init(void)
{
int i;
- if (iop_scc_present) {
+ if (macintosh_config->scc_type == MAC_SCC_IOP) {
+ if (macintosh_config->ident == MAC_MODEL_IIFX)
+ iop_base[IOP_NUM_SCC] = (struct mac_iop *)SCC_IOP_BASE_IIFX;
+ else
+ iop_base[IOP_NUM_SCC] = (struct mac_iop *)SCC_IOP_BASE_QUADRA;
+ iop_scc_present = 1;
pr_debug("SCC IOP detected at %p\n", iop_base[IOP_NUM_SCC]);
}
- if (iop_ism_present) {
+ if (macintosh_config->adb_type == MAC_ADB_IOP) {
+ if (macintosh_config->ident == MAC_MODEL_IIFX)
+ iop_base[IOP_NUM_ISM] = (struct mac_iop *)ISM_IOP_BASE_IIFX;
+ else
+ iop_base[IOP_NUM_ISM] = (struct mac_iop *)ISM_IOP_BASE_QUADRA;
+ iop_ism_present = 1;
pr_debug("ISM IOP detected at %p\n", iop_base[IOP_NUM_ISM]);
+
+ iop_stop(iop_base[IOP_NUM_ISM]);
iop_start(iop_base[IOP_NUM_ISM]);
iop_alive(iop_base[IOP_NUM_ISM]); /* clears the alive flag */
}
--
2.26.2
On Fri, Nov 20, 2020 at 5:51 AM Finn Thain <[email protected]> wrote:
> The idea behind iop_preinit() was to put the SCC IOP into bypass mode.
> However, that remains unimplemented and implementing it would be
> difficult. Let the comments and code reflect this. Even if iop_preinit()
> worked as described in the comments, it gets called immediately before
> iop_init() so it might as well part of iop_init().
>
> Cc: Joshua Thompson <[email protected]>
> Tested-by: Stan Johnson <[email protected]>
> Signed-off-by: Finn Thain <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
i.e. will queue in the m68k for-v5.11 branch.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds