After adding this binding header file, you can intuitively find
the interrupt number corresponding to each GPIO, and apply it
in the format of IRQID_XXX where it needs to be used.
Associated platforms:
- Amlogic Meson-G12A
- Amlogic Meson-G12B
- Amlogic Meson-SM1
[PATCH 1/3]:
V1 -> V2: Rename irq-meson-g12a-gpio.h to amlogic,meson-g12a-gpio-intc.h
[PATCH 2/3]:
V1 -> V2: Include header file changed to amlogic,meson-g12a-gpio-intc.h
[PATCH 3/3]:
V1 -> V2: Include header file changed to amlogic,meson-g12a-gpio-intc.h
Huqiang Qin (3):
dt-bindings: interrupt-controller: Add header file for Amlogic
Meson-G12A SoCs
pinctrl: Replace the IRQ number in the driver with the IRQID macro
definition
arm64: dts: Replace the IRQ number with the IRQID macro definition
.../boot/dts/amlogic/meson-g12-common.dtsi | 1 +
.../boot/dts/amlogic/meson-g12a-x96-max.dts | 2 +-
.../dts/amlogic/meson-g12b-bananapi-cm4.dtsi | 2 +-
.../boot/dts/amlogic/meson-g12b-bananapi.dtsi | 2 +-
.../amlogic/meson-g12b-odroid-go-ultra.dts | 4 +-
.../dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
.../boot/dts/amlogic/meson-g12b-w400.dtsi | 2 +-
.../dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 2 +-
.../boot/dts/amlogic/meson-sm1-bananapi.dtsi | 4 +-
.../boot/dts/amlogic/meson-sm1-h96-max.dts | 2 +-
.../boot/dts/amlogic/meson-sm1-odroid.dtsi | 2 +-
.../boot/dts/amlogic/meson-sm1-sei610.dts | 12 +-
.../dts/amlogic/meson-sm1-x96-air-gbit.dts | 2 +-
drivers/pinctrl/meson/pinctrl-meson-g12a.c | 35 ++---
.../amlogic,meson-g12a-gpio-intc.h | 126 ++++++++++++++++++
15 files changed, 164 insertions(+), 36 deletions(-)
create mode 100644 include/dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h
base-commit: c58c49dd89324b18a812762a2bfa5a0458e4f252
--
2.37.1
Replacing IRQ numbers with IRQID macro definitions makes node properties
easier to understand and also makes GPIO interrupts easier to use.
Associated platforms:
- Amlogic Meson-G12A
- Amlogic Meson-G12B
- Amlogic Meson-SM1
Signed-off-by: Huqiang Qin <[email protected]>
---
V1 -> V2: Include header file changed to amlogic,meson-g12a-gpio-intc.h
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 2 +-
.../boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi | 2 +-
.../boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts | 4 ++--
.../arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi | 2 +-
.../boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi | 4 ++--
arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 12 ++++++------
.../boot/dts/amlogic/meson-sm1-x96-air-gbit.dts | 2 +-
13 files changed, 20 insertions(+), 19 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 0c49655cc90c..d8b94a3167c3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/clock/g12a-aoclkc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
#include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index b2bb94981838..c79f3e8d26b7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -344,7 +344,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
index 97e522921b06..428b35e1d79c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -201,7 +201,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
index 83709787eb91..c69b0f803916 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
@@ -327,7 +327,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
index 276e95b34022..eed2a23047ca 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
@@ -380,7 +380,7 @@ rk818: pmic@1c {
compatible = "rockchip,rk818";
reg = <0x1c>;
interrupt-parent = <&gpio_intc>;
- interrupts = <7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
+ interrupts = <IRQID_GPIOAO_7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
#clock-cells = <1>;
vcc1-supply = <&vdd_sys>;
@@ -519,7 +519,7 @@ rk817: pmic@20 {
reg = <0x20>;
interrupt-parent = <&gpio_intc>;
- interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */
+ interrupts = <IRQID_GPIOAO_5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */
vcc1-supply = <&vdd_sys>;
vcc2-supply = <&vdd_sys>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 24d0442dffb2..01aa970b2f8c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -185,7 +185,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
index b40d2c1002c9..ac8b7178257e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -269,7 +269,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
index d1debccdc1c2..95e03bb02af2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
@@ -100,7 +100,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
index 17045ff81c69..62404743e62d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -45,7 +45,7 @@ key {
linux,code = <BTN_1>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
- interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
};
};
@@ -217,7 +217,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
index 0f6660e68e72..ebda1dd30fa6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
@@ -100,7 +100,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index 2fce44939f45..86b90f44a4b3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -283,7 +283,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 9068a334ea57..4f07d6387bb1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -53,7 +53,7 @@ key-1 {
linux,code = <BTN_0>;
gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
- interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <IRQID_GPIOH_6 IRQ_TYPE_EDGE_BOTH>;
};
key-2 {
@@ -61,7 +61,7 @@ key-2 {
linux,code = <BTN_1>;
gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
- interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <IRQID_GPIOH_7 IRQ_TYPE_EDGE_BOTH>;
};
key-3 {
@@ -69,7 +69,7 @@ key-3 {
linux,code = <BTN_2>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
- interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <IRQID_GPIOAO_2 IRQ_TYPE_EDGE_BOTH>;
};
key-mic-mute {
@@ -78,7 +78,7 @@ key-mic-mute {
linux,input-type = <EV_SW>;
gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
- interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <IRQID_GPIOE_2 IRQ_TYPE_EDGE_BOTH>;
};
key-power {
@@ -86,7 +86,7 @@ key-power {
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
- interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
};
};
@@ -583,7 +583,7 @@ &uart_A {
bluetooth {
compatible = "brcm,bcm43438-bt";
interrupt-parent = <&gpio_intc>;
- interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <IRQID_GPIOX_18 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wakeup";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
index 7e1a74046ba5..6ee406066ee0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
@@ -100,7 +100,7 @@ external_phy: ethernet-phy@0 {
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
};
};
--
2.37.1
Replacing IRQ numbers with IRQID macro definitions makes driver code
easier to understand.
Associated platforms:
- Amlogic Meson-G12A
- Amlogic Meson-G12B
- Amlogic Meson-SM1
Signed-off-by: Huqiang Qin <[email protected]>
Acked-by: Linus Walleij <[email protected]>
---
V1 -> V2: Include header file changed to amlogic,meson-g12a-gpio-intc.h
drivers/pinctrl/meson/pinctrl-meson-g12a.c | 35 +++++++++++-----------
1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/drivers/pinctrl/meson/pinctrl-meson-g12a.c b/drivers/pinctrl/meson/pinctrl-meson-g12a.c
index d182a575981e..3cd86d6a0a60 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-g12a.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-g12a.c
@@ -8,6 +8,7 @@
*/
#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
#include "pinctrl-meson.h"
#include "pinctrl-meson-axg-pmx.h"
@@ -1318,31 +1319,31 @@ static struct meson_pmx_func meson_g12a_aobus_functions[] = {
static struct meson_bank meson_g12a_periphs_banks[] = {
/* name first last irq pullen pull dir out in ds */
- BANK_DS("Z", GPIOZ_0, GPIOZ_15, 12, 27,
- 4, 0, 4, 0, 12, 0, 13, 0, 14, 0, 5, 0),
- BANK_DS("H", GPIOH_0, GPIOH_8, 28, 36,
- 3, 0, 3, 0, 9, 0, 10, 0, 11, 0, 4, 0),
- BANK_DS("BOOT", BOOT_0, BOOT_15, 37, 52,
- 0, 0, 0, 0, 0, 0, 1, 0, 2, 0, 0, 0),
- BANK_DS("C", GPIOC_0, GPIOC_7, 53, 60,
- 1, 0, 1, 0, 3, 0, 4, 0, 5, 0, 1, 0),
- BANK_DS("A", GPIOA_0, GPIOA_15, 61, 76,
- 5, 0, 5, 0, 16, 0, 17, 0, 18, 0, 6, 0),
- BANK_DS("X", GPIOX_0, GPIOX_19, 77, 96,
- 2, 0, 2, 0, 6, 0, 7, 0, 8, 0, 2, 0),
+ BANK_DS("Z", GPIOZ_0, GPIOZ_15, IRQID_GPIOZ_0, IRQID_GPIOZ_15,
+ 4, 0, 4, 0, 12, 0, 13, 0, 14, 0, 5, 0),
+ BANK_DS("H", GPIOH_0, GPIOH_8, IRQID_GPIOH_0, IRQID_GPIOH_8,
+ 3, 0, 3, 0, 9, 0, 10, 0, 11, 0, 4, 0),
+ BANK_DS("BOOT", BOOT_0, BOOT_15, IRQID_BOOT_0, IRQID_BOOT_15,
+ 0, 0, 0, 0, 0, 0, 1, 0, 2, 0, 0, 0),
+ BANK_DS("C", GPIOC_0, GPIOC_7, IRQID_GPIOC_0, IRQID_GPIOC_7,
+ 1, 0, 1, 0, 3, 0, 4, 0, 5, 0, 1, 0),
+ BANK_DS("A", GPIOA_0, GPIOA_15, IRQID_GPIOA_0, IRQID_GPIOA_15,
+ 5, 0, 5, 0, 16, 0, 17, 0, 18, 0, 6, 0),
+ BANK_DS("X", GPIOX_0, GPIOX_19, IRQID_GPIOX_0, IRQID_GPIOX_19,
+ 2, 0, 2, 0, 6, 0, 7, 0, 8, 0, 2, 0),
};
static struct meson_bank meson_g12a_aobus_banks[] = {
/* name first last irq pullen pull dir out in ds */
- BANK_DS("AO", GPIOAO_0, GPIOAO_11, 0, 11, 3, 0, 2, 0, 0, 0, 4, 0, 1, 0,
- 0, 0),
+ BANK_DS("AO", GPIOAO_0, GPIOAO_11, IRQID_GPIOAO_0, IRQID_GPIOAO_11,
+ 3, 0, 2, 0, 0, 0, 4, 0, 1, 0, 0, 0),
/* GPIOE actually located in the AO bank */
- BANK_DS("E", GPIOE_0, GPIOE_2, 97, 99, 3, 16, 2, 16, 0, 16, 4, 16, 1,
- 16, 1, 0),
+ BANK_DS("E", GPIOE_0, GPIOE_2, IRQID_GPIOE_0, IRQID_GPIOE_2,
+ 3, 16, 2, 16, 0, 16, 4, 16, 1, 16, 1, 0),
};
static struct meson_pmx_bank meson_g12a_periphs_pmx_banks[] = {
- /* name first lask reg offset */
+ /* name first last reg offset */
BANK_PMX("Z", GPIOZ_0, GPIOZ_15, 0x6, 0),
BANK_PMX("H", GPIOH_0, GPIOH_8, 0xb, 0),
BANK_PMX("BOOT", BOOT_0, BOOT_15, 0x0, 0),
--
2.37.1
Add a new dt-binding header that details the interrupt number of the GPIO.
Signed-off-by: Huqiang Qin <[email protected]>
---
V1 -> V2: Rename irq-meson-g12a-gpio.h to amlogic,meson-g12a-gpio-intc.h
.../amlogic,meson-g12a-gpio-intc.h | 126 ++++++++++++++++++
1 file changed, 126 insertions(+)
create mode 100644 include/dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h
diff --git a/include/dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h b/include/dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h
new file mode 100644
index 000000000000..bd415cb7b669
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2023 Amlogic, Inc. All rights reserved.
+ * Author: Huqiang Qin <[email protected]>
+ */
+
+#ifndef _DT_BINDINGS_IRQ_MESON_G12A_GPIO_H
+#define _DT_BINDINGS_IRQ_MESON_G12A_GPIO_H
+
+/* IRQID[11:0] - GPIOAO[11:0] */
+#define IRQID_GPIOAO_0 0
+#define IRQID_GPIOAO_1 1
+#define IRQID_GPIOAO_2 2
+#define IRQID_GPIOAO_3 3
+#define IRQID_GPIOAO_4 4
+#define IRQID_GPIOAO_5 5
+#define IRQID_GPIOAO_6 6
+#define IRQID_GPIOAO_7 7
+#define IRQID_GPIOAO_8 8
+#define IRQID_GPIOAO_9 9
+#define IRQID_GPIOAO_10 10
+#define IRQID_GPIOAO_11 11
+
+/* IRQID[27:12] - GPIOZ[15:0] */
+#define IRQID_GPIOZ_0 12
+#define IRQID_GPIOZ_1 13
+#define IRQID_GPIOZ_2 14
+#define IRQID_GPIOZ_3 15
+#define IRQID_GPIOZ_4 16
+#define IRQID_GPIOZ_5 17
+#define IRQID_GPIOZ_6 18
+#define IRQID_GPIOZ_7 19
+#define IRQID_GPIOZ_8 20
+#define IRQID_GPIOZ_9 21
+#define IRQID_GPIOZ_10 22
+#define IRQID_GPIOZ_11 23
+#define IRQID_GPIOZ_12 24
+#define IRQID_GPIOZ_13 25
+#define IRQID_GPIOZ_14 26
+#define IRQID_GPIOZ_15 27
+
+/* IRQID[36:28] - GPIOH[8:0] */
+#define IRQID_GPIOH_0 28
+#define IRQID_GPIOH_1 29
+#define IRQID_GPIOH_2 30
+#define IRQID_GPIOH_3 31
+#define IRQID_GPIOH_4 32
+#define IRQID_GPIOH_5 33
+#define IRQID_GPIOH_6 34
+#define IRQID_GPIOH_7 35
+#define IRQID_GPIOH_8 36
+
+/* IRQID[52:37] - BOOT[15:0] */
+#define IRQID_BOOT_0 37
+#define IRQID_BOOT_1 38
+#define IRQID_BOOT_2 39
+#define IRQID_BOOT_3 40
+#define IRQID_BOOT_4 41
+#define IRQID_BOOT_5 42
+#define IRQID_BOOT_6 43
+#define IRQID_BOOT_7 44
+#define IRQID_BOOT_8 45
+#define IRQID_BOOT_9 46
+#define IRQID_BOOT_10 47
+#define IRQID_BOOT_11 48
+#define IRQID_BOOT_12 49
+#define IRQID_BOOT_13 50
+#define IRQID_BOOT_14 51
+#define IRQID_BOOT_15 52
+
+/* IRQID[60:53] - GPIOC[7:0] */
+#define IRQID_GPIOC_0 53
+#define IRQID_GPIOC_1 54
+#define IRQID_GPIOC_2 55
+#define IRQID_GPIOC_3 56
+#define IRQID_GPIOC_4 57
+#define IRQID_GPIOC_5 58
+#define IRQID_GPIOC_6 59
+#define IRQID_GPIOC_7 60
+
+/* IRQID[76:61] - GPIOA[15:0] */
+#define IRQID_GPIOA_0 61
+#define IRQID_GPIOA_1 62
+#define IRQID_GPIOA_2 63
+#define IRQID_GPIOA_3 64
+#define IRQID_GPIOA_4 65
+#define IRQID_GPIOA_5 66
+#define IRQID_GPIOA_6 67
+#define IRQID_GPIOA_7 68
+#define IRQID_GPIOA_8 69
+#define IRQID_GPIOA_9 70
+#define IRQID_GPIOA_10 71
+#define IRQID_GPIOA_11 72
+#define IRQID_GPIOA_12 73
+#define IRQID_GPIOA_13 74
+#define IRQID_GPIOA_14 75
+#define IRQID_GPIOA_15 76
+
+/* IRQID[96:77] - GPIOX[19:0] */
+#define IRQID_GPIOX_0 77
+#define IRQID_GPIOX_1 78
+#define IRQID_GPIOX_2 79
+#define IRQID_GPIOX_3 80
+#define IRQID_GPIOX_4 81
+#define IRQID_GPIOX_5 82
+#define IRQID_GPIOX_6 83
+#define IRQID_GPIOX_7 84
+#define IRQID_GPIOX_8 85
+#define IRQID_GPIOX_9 86
+#define IRQID_GPIOX_10 87
+#define IRQID_GPIOX_11 88
+#define IRQID_GPIOX_12 89
+#define IRQID_GPIOX_13 90
+#define IRQID_GPIOX_14 91
+#define IRQID_GPIOX_15 92
+#define IRQID_GPIOX_16 93
+#define IRQID_GPIOX_17 94
+#define IRQID_GPIOX_18 95
+#define IRQID_GPIOX_19 96
+
+/* IRQID[99:97] - GPIOE[2:0] */
+#define IRQID_GPIOE_0 97
+#define IRQID_GPIOE_1 98
+#define IRQID_GPIOE_2 99
+
+#endif /* _DT_BINDINGS_IRQ_MESON_G12A_GPIO_H */
--
2.37.1
On 24/07/2023 08:01, Huqiang Qin wrote:
> Add a new dt-binding header that details the interrupt number of the GPIO.
>
> Signed-off-by: Huqiang Qin <[email protected]>
> ---
>
> V1 -> V2: Rename irq-meson-g12a-gpio.h to amlogic,meson-g12a-gpio-intc.h
Acked-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On 24/07/2023 08:01, Huqiang Qin wrote:
> Replacing IRQ numbers with IRQID macro definitions makes node properties
> easier to understand and also makes GPIO interrupts easier to use.
>
> Associated platforms:
> - Amlogic Meson-G12A
> - Amlogic Meson-G12B
> - Amlogic Meson-SM1
>
> Signed-off-by: Huqiang Qin <[email protected]>
> ---
>
> V1 -> V2: Include header file changed to amlogic,meson-g12a-gpio-intc.h
>
> arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 1 +
> arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 2 +-
> .../boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi | 2 +-
> arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi | 2 +-
> .../boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts | 4 ++--
> .../arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
> arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi | 2 +-
> .../boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi | 4 ++--
> arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 2 +-
> arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 12 ++++++------
> .../boot/dts/amlogic/meson-sm1-x96-air-gbit.dts | 2 +-
> 13 files changed, 20 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> index 0c49655cc90c..d8b94a3167c3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> @@ -9,6 +9,7 @@
> #include <dt-bindings/clock/g12a-aoclkc.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
> #include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
> #include <dt-bindings/thermal/thermal.h>
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> index b2bb94981838..c79f3e8d26b7 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> @@ -344,7 +344,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
> index 97e522921b06..428b35e1d79c 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
> @@ -201,7 +201,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
> index 83709787eb91..c69b0f803916 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
> @@ -327,7 +327,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
> index 276e95b34022..eed2a23047ca 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
> @@ -380,7 +380,7 @@ rk818: pmic@1c {
> compatible = "rockchip,rk818";
> reg = <0x1c>;
> interrupt-parent = <&gpio_intc>;
> - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
> + interrupts = <IRQID_GPIOAO_7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
> #clock-cells = <1>;
>
> vcc1-supply = <&vdd_sys>;
> @@ -519,7 +519,7 @@ rk817: pmic@20 {
> reg = <0x20>;
> interrupt-parent = <&gpio_intc>;
>
> - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */
> + interrupts = <IRQID_GPIOAO_5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */
>
> vcc1-supply = <&vdd_sys>;
> vcc2-supply = <&vdd_sys>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> index 24d0442dffb2..01aa970b2f8c 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> @@ -185,7 +185,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
> index b40d2c1002c9..ac8b7178257e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
> @@ -269,7 +269,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
> index d1debccdc1c2..95e03bb02af2 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
> @@ -100,7 +100,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
> index 17045ff81c69..62404743e62d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
> @@ -45,7 +45,7 @@ key {
> linux,code = <BTN_1>;
> gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
> interrupt-parent = <&gpio_intc>;
> - interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
> };
> };
>
> @@ -217,7 +217,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
> index 0f6660e68e72..ebda1dd30fa6 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
> @@ -100,7 +100,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> index 2fce44939f45..86b90f44a4b3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> @@ -283,7 +283,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> index 9068a334ea57..4f07d6387bb1 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> @@ -53,7 +53,7 @@ key-1 {
> linux,code = <BTN_0>;
> gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
> interrupt-parent = <&gpio_intc>;
> - interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <IRQID_GPIOH_6 IRQ_TYPE_EDGE_BOTH>;
> };
>
> key-2 {
> @@ -61,7 +61,7 @@ key-2 {
> linux,code = <BTN_1>;
> gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
> interrupt-parent = <&gpio_intc>;
> - interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <IRQID_GPIOH_7 IRQ_TYPE_EDGE_BOTH>;
> };
>
> key-3 {
> @@ -69,7 +69,7 @@ key-3 {
> linux,code = <BTN_2>;
> gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
> interrupt-parent = <&gpio_intc>;
> - interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <IRQID_GPIOAO_2 IRQ_TYPE_EDGE_BOTH>;
> };
>
> key-mic-mute {
> @@ -78,7 +78,7 @@ key-mic-mute {
> linux,input-type = <EV_SW>;
> gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
> interrupt-parent = <&gpio_intc>;
> - interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <IRQID_GPIOE_2 IRQ_TYPE_EDGE_BOTH>;
> };
>
> key-power {
> @@ -86,7 +86,7 @@ key-power {
> linux,code = <KEY_POWER>;
> gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
> interrupt-parent = <&gpio_intc>;
> - interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
> };
> };
>
> @@ -583,7 +583,7 @@ &uart_A {
> bluetooth {
> compatible = "brcm,bcm43438-bt";
> interrupt-parent = <&gpio_intc>;
> - interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <IRQID_GPIOX_18 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "host-wakeup";
> shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> max-speed = <2000000>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
> index 7e1a74046ba5..6ee406066ee0 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
> @@ -100,7 +100,7 @@ external_phy: ethernet-phy@0 {
>
> interrupt-parent = <&gpio_intc>;
> /* MAC_INTR on GPIOZ_14 */
> - interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
Reviewed-by: Neil Armstrong <[email protected]>
Hi Linus,
On 24/07/2023 08:01, Huqiang Qin wrote:
> After adding this binding header file, you can intuitively find
> the interrupt number corresponding to each GPIO, and apply it
> in the format of IRQID_XXX where it needs to be used.
>
> Associated platforms:
> - Amlogic Meson-G12A
> - Amlogic Meson-G12B
> - Amlogic Meson-SM1
>
> [PATCH 1/3]:
> V1 -> V2: Rename irq-meson-g12a-gpio.h to amlogic,meson-g12a-gpio-intc.h
>
> [PATCH 2/3]:
> V1 -> V2: Include header file changed to amlogic,meson-g12a-gpio-intc.h
>
> [PATCH 3/3]:
> V1 -> V2: Include header file changed to amlogic,meson-g12a-gpio-intc.h
>
> Huqiang Qin (3):
> dt-bindings: interrupt-controller: Add header file for Amlogic
> Meson-G12A SoCs
> pinctrl: Replace the IRQ number in the driver with the IRQID macro
> definition
> arm64: dts: Replace the IRQ number with the IRQID macro definition
What's the best way to apply this patchset ?
Thanks,
Neil
>
> .../boot/dts/amlogic/meson-g12-common.dtsi | 1 +
> .../boot/dts/amlogic/meson-g12a-x96-max.dts | 2 +-
> .../dts/amlogic/meson-g12b-bananapi-cm4.dtsi | 2 +-
> .../boot/dts/amlogic/meson-g12b-bananapi.dtsi | 2 +-
> .../amlogic/meson-g12b-odroid-go-ultra.dts | 4 +-
> .../dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
> .../boot/dts/amlogic/meson-g12b-w400.dtsi | 2 +-
> .../dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 2 +-
> .../boot/dts/amlogic/meson-sm1-bananapi.dtsi | 4 +-
> .../boot/dts/amlogic/meson-sm1-h96-max.dts | 2 +-
> .../boot/dts/amlogic/meson-sm1-odroid.dtsi | 2 +-
> .../boot/dts/amlogic/meson-sm1-sei610.dts | 12 +-
> .../dts/amlogic/meson-sm1-x96-air-gbit.dts | 2 +-
> drivers/pinctrl/meson/pinctrl-meson-g12a.c | 35 ++---
> .../amlogic,meson-g12a-gpio-intc.h | 126 ++++++++++++++++++
> 15 files changed, 164 insertions(+), 36 deletions(-)
> create mode 100644 include/dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h
>
>
> base-commit: c58c49dd89324b18a812762a2bfa5a0458e4f252
On Mon, Jul 24, 2023 at 8:02 AM Huqiang Qin <[email protected]> wrote:
> After adding this binding header file, you can intuitively find
> the interrupt number corresponding to each GPIO, and apply it
> in the format of IRQID_XXX where it needs to be used.
(...)
> Huqiang Qin (3):
> dt-bindings: interrupt-controller: Add header file for Amlogic
> Meson-G12A SoCs
> pinctrl: Replace the IRQ number in the driver with the IRQID macro
> definition
> arm64: dts: Replace the IRQ number with the IRQID macro definition
Neil wrote:
> What's the best way to apply this patchset ?
I just applied all three to the pin control tree.
I could have applied just the two first and then offered an
immutable branch. But eh... too much work for too low risk.
Better to just apply it and hope all works out. If it explodes
I just back out and figure something like the above.
Yours,
Linus Walleij
On 07/08/2023 15:37, Linus Walleij wrote:
> On Mon, Jul 24, 2023 at 8:02 AM Huqiang Qin <[email protected]> wrote:
>
>> After adding this binding header file, you can intuitively find
>> the interrupt number corresponding to each GPIO, and apply it
>> in the format of IRQID_XXX where it needs to be used.
> (...)
>
>> Huqiang Qin (3):
>> dt-bindings: interrupt-controller: Add header file for Amlogic
>> Meson-G12A SoCs
>> pinctrl: Replace the IRQ number in the driver with the IRQID macro
>> definition
>> arm64: dts: Replace the IRQ number with the IRQID macro definition
>
> Neil wrote:
>> What's the best way to apply this patchset ?
>
> I just applied all three to the pin control tree.
>
> I could have applied just the two first and then offered an
> immutable branch. But eh... too much work for too low risk.
> Better to just apply it and hope all works out. If it explodes
> I just back out and figure something like the above.
Perfect, thx :-)
Neil
>
> Yours,
> Linus Walleij