This is the start of the stable review cycle for the 4.9.315 release.
There are 19 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 18 May 2022 19:36:02 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.315-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.9.315-rc1
Yang Yingliang <[email protected]>
tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
Nicolas Dichtel <[email protected]>
ping: fix address binding wrt vrf
Sven Schwermer <[email protected]>
USB: serial: option: add Fibocom MA510 modem
Sven Schwermer <[email protected]>
USB: serial: option: add Fibocom L610 modem
Ethan Yang <[email protected]>
USB: serial: qcserial: add support for Sierra Wireless EM7590
Scott Chen <[email protected]>
USB: serial: pl2303: add device id for HP LM930 Display
Sergey Ryazanov <[email protected]>
usb: cdc-wdm: fix reading stuck on device close
Mark Brown <[email protected]>
ASoC: ops: Validate input values in snd_soc_put_volsw_range()
Mark Brown <[email protected]>
ASoC: max98090: Generate notifications on changes for custom control
Mark Brown <[email protected]>
ASoC: max98090: Reject invalid values in custom control put()
Ji-Ze Hong (Peter Hong) <[email protected]>
hwmon: (f71882fg) Fix negative temperature
Taehee Yoo <[email protected]>
net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
Alexandra Winter <[email protected]>
s390/lcs: fix variable dereferenced before check
Alexandra Winter <[email protected]>
s390/ctcm: fix potential memory leak
Alexandra Winter <[email protected]>
s390/ctcm: fix variable dereferenced before check
Johannes Berg <[email protected]>
mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection
Eric Dumazet <[email protected]>
netlink: do not reset transport header in netlink_recvmsg()
Lokesh Dhoundiyal <[email protected]>
ipv4: drop dst in multicast routing path
Tariq Toukan <[email protected]>
net: Fix features skip in for_each_netdev_feature()
-------------
Diffstat:
Makefile | 4 ++--
drivers/hwmon/f71882fg.c | 5 +++--
drivers/net/ethernet/sfc/ef10.c | 5 +++++
drivers/net/wireless/mac80211_hwsim.c | 3 +++
drivers/s390/net/ctcm_mpc.c | 6 +-----
drivers/s390/net/ctcm_sysfs.c | 5 +++--
drivers/s390/net/lcs.c | 7 ++++---
drivers/tty/serial/digicolor-usart.c | 2 +-
drivers/usb/class/cdc-wdm.c | 1 +
drivers/usb/serial/option.c | 4 ++++
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 1 +
drivers/usb/serial/qcserial.c | 2 ++
include/linux/netdev_features.h | 4 ++--
net/ipv4/ping.c | 12 +++++++++++-
net/ipv4/route.c | 1 +
net/netlink/af_netlink.c | 1 -
sound/soc/codecs/max98090.c | 5 ++++-
sound/soc/soc-ops.c | 18 +++++++++++++++++-
19 files changed, 66 insertions(+), 21 deletions(-)
From: Sven Schwermer <[email protected]>
commit 714adff9a6271b5f1664b04c944b598141ebfe73 upstream.
The L610 modem has 3 USB configurations that are configurable via the AT
command AT+GTUSBMODE={31,32,33} which make the modem enumerate with the
following interfaces, respectively:
31: Modem + NV + MOS + Diag + LOG + AT + AT
32: ECM + Modem + NV + MOS + Diag + LOG + AT + AT
33: RNDIS + Modem + NV + MOS + Diag + LOG + AT + AT
A detailed description of the USB configuration for each mode follows:
+GTUSBMODE: 31
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=124 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4d10 Rev= 0.00
S: Manufacturer=FIBOCOM
S: Product=L610
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=400mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+GTUSBMODE: 32
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=122 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4d11 Rev= 0.00
S: Manufacturer=FIBOCOM
S: Product=L610
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+GTUSBMODE: 33
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=126 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4d11 Rev= 0.00
S: Manufacturer=FIBOCOM
S: Product=L610
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Sven Schwermer <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2101,6 +2101,8 @@ static const struct usb_device_id option
.driver_info = RSVD(3) },
{ USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 (IOT version) */
.driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
+ { USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */
+ { USB_DEVICE_INTERFACE_CLASS(0x1782, 0x4d11, 0xff) }, /* Fibocom L610 (ECM/RNDIS mode) */
{ USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */
.driver_info = RSVD(4) | RSVD(5) },
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */
From: Mark Brown <[email protected]>
[ Upstream commit aa22125c57f9e577f0a667e4fa07fc3fa8ca1e60 ]
Check that values written via snd_soc_put_volsw_range() are
within the range advertised by the control, ensuring that we
don't write out of spec values to the hardware.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-ops.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c
index 74968ddee49f..90ba5521c189 100644
--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -528,7 +528,15 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
unsigned int val, val_mask;
- int err, ret;
+ int err, ret, tmp;
+
+ tmp = ucontrol->value.integer.value[0];
+ if (tmp < 0)
+ return -EINVAL;
+ if (mc->platform_max && tmp > mc->platform_max)
+ return -EINVAL;
+ if (tmp > mc->max - mc->min + 1)
+ return -EINVAL;
if (invert)
val = (max - ucontrol->value.integer.value[0]) & mask;
@@ -543,6 +551,14 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
ret = err;
if (snd_soc_volsw_is_stereo(mc)) {
+ tmp = ucontrol->value.integer.value[1];
+ if (tmp < 0)
+ return -EINVAL;
+ if (mc->platform_max && tmp > mc->platform_max)
+ return -EINVAL;
+ if (tmp > mc->max - mc->min + 1)
+ return -EINVAL;
+
if (invert)
val = (max - ucontrol->value.integer.value[1]) & mask;
else
--
2.35.1
From: Johannes Berg <[email protected]>
[ Upstream commit 9e2db50f1ef2238fc2f71c5de1c0418b7a5b0ea2 ]
This is needed since it might use (and pass out) pointers to
e.g. keys protected by RCU. Can't really happen here as the
frames aren't encrypted, but we need to still adhere to the
rules.
Fixes: cacfddf82baf ("mac80211_hwsim: initialize ieee80211_tx_info at hw_scan_work")
Signed-off-by: Johannes Berg <[email protected]>
Link: https://lore.kernel.org/r/20220505230421.5f139f9de173.I77ae111a28f7c0e9fd1ebcee7f39dbec5c606770@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mac80211_hwsim.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index a34647efb5ea..2cd1b3cfcc09 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1987,11 +1987,13 @@ static void hw_scan_work(struct work_struct *work)
memcpy(skb_put(probe, req->ie_len), req->ie,
req->ie_len);
+ rcu_read_lock();
if (!ieee80211_tx_prepare_skb(hwsim->hw,
hwsim->hw_scan_vif,
probe,
hwsim->tmp_chan->band,
NULL)) {
+ rcu_read_unlock();
kfree_skb(probe);
continue;
}
@@ -1999,6 +2001,7 @@ static void hw_scan_work(struct work_struct *work)
local_bh_disable();
mac80211_hwsim_tx_frame(hwsim->hw, probe,
hwsim->tmp_chan);
+ rcu_read_unlock();
local_bh_enable();
}
}
--
2.35.1
From: Eric Dumazet <[email protected]>
[ Upstream commit d5076fe4049cadef1f040eda4aaa001bb5424225 ]
netlink_recvmsg() does not need to change transport header.
If transport header was needed, it should have been reset
by the producer (netlink_dump()), not the consumer(s).
The following trace probably happened when multiple threads
were using MSG_PEEK.
BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg
write to 0xffff88811e9f15b2 of 2 bytes by task 32012 on cpu 1:
skb_reset_transport_header include/linux/skbuff.h:2760 [inline]
netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
__sys_recvfrom+0x204/0x2c0 net/socket.c:2097
__do_sys_recvfrom net/socket.c:2115 [inline]
__se_sys_recvfrom net/socket.c:2111 [inline]
__x64_sys_recvfrom+0x74/0x90 net/socket.c:2111
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
write to 0xffff88811e9f15b2 of 2 bytes by task 32005 on cpu 0:
skb_reset_transport_header include/linux/skbuff.h:2760 [inline]
netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978
____sys_recvmsg+0x162/0x2f0
___sys_recvmsg net/socket.c:2674 [inline]
__sys_recvmsg+0x209/0x3f0 net/socket.c:2704
__do_sys_recvmsg net/socket.c:2714 [inline]
__se_sys_recvmsg net/socket.c:2711 [inline]
__x64_sys_recvmsg+0x42/0x50 net/socket.c:2711
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0xffff -> 0x0000
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 32005 Comm: syz-executor.4 Not tainted 5.18.0-rc1-syzkaller-00328-ge1f700ebd6be-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netlink/af_netlink.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index a8674e9ff37b..47b1631bf14c 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1929,7 +1929,6 @@ static int netlink_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
copied = len;
}
- skb_reset_transport_header(data_skb);
err = skb_copy_datagram_msg(data_skb, 0, msg, copied);
if (msg->msg_name) {
--
2.35.1
From: Ji-Ze Hong (Peter Hong) <[email protected]>
[ Upstream commit 4aaaaf0f279836f06d3b9d0ffeec7a1e1a04ceef ]
All temperature of Fintek superio hwmonitor that using 1-byte reg will use
2's complement.
In show_temp()
temp = data->temp[nr] * 1000;
When data->temp[nr] read as 255, it indicate -1C, but this code will report
255C to userspace. It'll be ok when change to:
temp = ((s8)data->temp[nr]) * 1000;
Signed-off-by: Ji-Ze Hong (Peter Hong) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/f71882fg.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index cb28e4b4fb10..b87ca56fb774 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -1590,8 +1590,9 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
temp *= 125;
if (sign)
temp -= 128000;
- } else
- temp = data->temp[nr] * 1000;
+ } else {
+ temp = ((s8)data->temp[nr]) * 1000;
+ }
return sprintf(buf, "%d\n", temp);
}
--
2.35.1
From: Nicolas Dichtel <[email protected]>
commit e1a7ac6f3ba6e157adcd0ca94d92a401f1943f56 upstream.
When ping_group_range is updated, 'ping' uses the DGRAM ICMP socket,
instead of an IP raw socket. In this case, 'ping' is unable to bind its
socket to a local address owned by a vrflite.
Before the patch:
$ sysctl -w net.ipv4.ping_group_range='0 2147483647'
$ ip link add blue type vrf table 10
$ ip link add foo type dummy
$ ip link set foo master blue
$ ip link set foo up
$ ip addr add 192.168.1.1/24 dev foo
$ ip addr add 2001::1/64 dev foo
$ ip vrf exec blue ping -c1 -I 192.168.1.1 192.168.1.2
ping: bind: Cannot assign requested address
$ ip vrf exec blue ping6 -c1 -I 2001::1 2001::2
ping6: bind icmp socket: Cannot assign requested address
CC: [email protected]
Fixes: 1b69c6d0ae90 ("net: Introduce L3 Master device abstraction")
Signed-off-by: Nicolas Dichtel <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/ping.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -302,6 +302,7 @@ static int ping_check_bind_addr(struct s
struct net *net = sock_net(sk);
if (sk->sk_family == AF_INET) {
struct sockaddr_in *addr = (struct sockaddr_in *) uaddr;
+ u32 tb_id = RT_TABLE_LOCAL;
int chk_addr_ret;
if (addr_len < sizeof(*addr))
@@ -315,7 +316,8 @@ static int ping_check_bind_addr(struct s
pr_debug("ping_check_bind_addr(sk=%p,addr=%pI4,port=%d)\n",
sk, &addr->sin_addr.s_addr, ntohs(addr->sin_port));
- chk_addr_ret = inet_addr_type(net, addr->sin_addr.s_addr);
+ tb_id = l3mdev_fib_table_by_index(net, sk->sk_bound_dev_if) ? : tb_id;
+ chk_addr_ret = inet_addr_type_table(net, addr->sin_addr.s_addr, tb_id);
if (addr->sin_addr.s_addr == htonl(INADDR_ANY))
chk_addr_ret = RTN_LOCAL;
@@ -355,6 +357,14 @@ static int ping_check_bind_addr(struct s
if (!dev) {
rcu_read_unlock();
return -ENODEV;
+ }
+ }
+
+ if (!dev && sk->sk_bound_dev_if) {
+ dev = dev_get_by_index_rcu(net, sk->sk_bound_dev_if);
+ if (!dev) {
+ rcu_read_unlock();
+ return -ENODEV;
}
}
has_addr = pingv6_ops.ipv6_chk_addr(net, &addr->sin6_addr, dev,
From: Alexandra Winter <[email protected]>
[ Upstream commit 0c0b20587b9f25a2ad14db7f80ebe49bdf29920a ]
smatch complains about
drivers/s390/net/ctcm_mpc.c:1210 ctcmpc_unpack_skb() warn: possible memory leak of 'mpcginfo'
mpc_action_discontact() did not free mpcginfo. Consolidate the freeing in
ctcmpc_unpack_skb().
Fixes: 293d984f0e36 ("ctcm: infrastructure for replaced ctc driver")
Signed-off-by: Alexandra Winter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/net/ctcm_mpc.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/s390/net/ctcm_mpc.c b/drivers/s390/net/ctcm_mpc.c
index c103fc7efe9f..f2559e20df70 100644
--- a/drivers/s390/net/ctcm_mpc.c
+++ b/drivers/s390/net/ctcm_mpc.c
@@ -624,8 +624,6 @@ static void mpc_rcvd_sweep_resp(struct mpcg_info *mpcginfo)
ctcm_clear_busy_do(dev);
}
- kfree(mpcginfo);
-
return;
}
@@ -1205,10 +1203,10 @@ static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
CTCM_FUNTAIL, dev->name);
priv->stats.rx_dropped++;
/* mpcginfo only used for non-data transfers */
- kfree(mpcginfo);
if (do_debug_data)
ctcmpc_dump_skb(pskb, -8);
}
+ kfree(mpcginfo);
}
done:
@@ -1998,7 +1996,6 @@ static void mpc_action_rcvd_xid0(fsm_instance *fsm, int event, void *arg)
}
break;
}
- kfree(mpcginfo);
CTCM_PR_DEBUG("ctcmpc:%s() %s xid2:%i xid7:%i xidt_p2:%i \n",
__func__, ch->id, grp->outstanding_xid2,
@@ -2059,7 +2056,6 @@ static void mpc_action_rcvd_xid7(fsm_instance *fsm, int event, void *arg)
mpc_validate_xid(mpcginfo);
break;
}
- kfree(mpcginfo);
return;
}
--
2.35.1
On 5/16/2022 12:36 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.315 release.
> There are 19 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 18 May 2022 19:36:02 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.315-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
From: Tariq Toukan <[email protected]>
[ Upstream commit 85db6352fc8a158a893151baa1716463d34a20d0 ]
The find_next_netdev_feature() macro gets the "remaining length",
not bit index.
Passing "bit - 1" for the following iteration is wrong as it skips
the adjacent bit. Pass "bit" instead.
Fixes: 3b89ea9c5902 ("net: Fix for_each_netdev_feature on Big endian")
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/netdev_features.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/netdev_features.h b/include/linux/netdev_features.h
index b692edeb0b90..27abbd7fbb2b 100644
--- a/include/linux/netdev_features.h
+++ b/include/linux/netdev_features.h
@@ -139,7 +139,7 @@ enum {
#define NETIF_F_BUSY_POLL __NETIF_F(BUSY_POLL)
#define NETIF_F_HW_TC __NETIF_F(HW_TC)
-/* Finds the next feature with the highest number of the range of start till 0.
+/* Finds the next feature with the highest number of the range of start-1 till 0.
*/
static inline int find_next_netdev_feature(u64 feature, unsigned long start)
{
@@ -158,7 +158,7 @@ static inline int find_next_netdev_feature(u64 feature, unsigned long start)
for ((bit) = find_next_netdev_feature((mask_addr), \
NETDEV_FEATURE_COUNT); \
(bit) >= 0; \
- (bit) = find_next_netdev_feature((mask_addr), (bit) - 1))
+ (bit) = find_next_netdev_feature((mask_addr), (bit)))
/* Features valid for ethtool to change */
/* = all defined minus driver/device-class-related */
--
2.35.1
From: Sergey Ryazanov <[email protected]>
commit 01e01f5c89773c600a9f0b32c888de0146066c3a upstream.
cdc-wdm tracks whether a response reading request is in-progress and
blocks the next request from being sent until the previous request is
completed. As soon as last user closes the cdc-wdm device file, the
driver cancels any ongoing requests, resets the pending response
counter, but leaves the response reading in-progress flag
(WDM_RESPONDING) untouched.
So if the user closes the device file during the response receive
request is being performed, no more data will be obtained from the
modem. The request will be cancelled, effectively preventing the
WDM_RESPONDING flag from being reseted. Keeping the flag set will
prevent a new response receive request from being sent, permanently
blocking the read path. The read path will staying blocked until the
module will be reloaded or till the modem will be re-attached.
This stuck has been observed with a Huawei E3372 modem attached to an
OpenWrt router and using the comgt utility to set up a network
connection.
Fix this issue by clearing the WDM_RESPONDING flag on the device file
close.
Without this fix, the device reading stuck can be easily reproduced in a
few connection establishing attempts. With this fix, a load test for
modem connection re-establishing worked for several hours without any
issues.
Fixes: 922a5eadd5a3 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device")
Signed-off-by: Sergey Ryazanov <[email protected]>
Cc: stable <[email protected]>
Acked-by: Oliver Neukum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-wdm.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -744,6 +744,7 @@ static int wdm_release(struct inode *ino
kill_urbs(desc);
spin_lock_irq(&desc->iuspin);
desc->resp_count = 0;
+ clear_bit(WDM_RESPONDING, &desc->flags);
spin_unlock_irq(&desc->iuspin);
desc->manage_power(desc->intf, 0);
} else {
From: Mark Brown <[email protected]>
[ Upstream commit 2fbe467bcbfc760a08f08475eea6bbd4c2874319 ]
The max98090 driver has a custom put function for some controls which can
only be updated in certain circumstances which makes no effort to validate
that input is suitable for the control, allowing out of spec values to be
written to the hardware and presented to userspace. Fix this by returning
an error when invalid values are written.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/max98090.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index e7aef841f87d..4aefb13900c2 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -419,6 +419,9 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol,
val = (val >> mc->shift) & mask;
+ if (sel < 0 || sel > mc->max)
+ return -EINVAL;
+
*select = sel;
/* Setting a volume is only valid if it is already On */
--
2.35.1
On 5/16/22 1:36 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.315 release.
> There are 19 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 18 May 2022 19:36:02 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.315-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
From: Ethan Yang <[email protected]>
commit 870b1eee2d844727b06e238c121d260bc5645580 upstream.
Add support for Sierra Wireless EM7590 0xc080/0xc081 compositions.
Signed-off-by: Ethan Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/qcserial.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -170,6 +170,8 @@ static const struct usb_device_id id_tab
{DEVICE_SWI(0x1199, 0x9090)}, /* Sierra Wireless EM7565 QDL */
{DEVICE_SWI(0x1199, 0x9091)}, /* Sierra Wireless EM7565 */
{DEVICE_SWI(0x1199, 0x90d2)}, /* Sierra Wireless EM9191 QDL */
+ {DEVICE_SWI(0x1199, 0xc080)}, /* Sierra Wireless EM7590 QDL */
+ {DEVICE_SWI(0x1199, 0xc081)}, /* Sierra Wireless EM7590 */
{DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
From: Alexandra Winter <[email protected]>
[ Upstream commit 2c50c6867c85afee6f2b3bcbc50fc9d0083d1343 ]
Found by cppcheck and smatch.
smatch complains about
drivers/s390/net/ctcm_sysfs.c:43 ctcm_buffer_write() warn: variable dereferenced before check 'priv' (see line 42)
Fixes: 3c09e2647b5e ("ctcm: rename READ/WRITE defines to avoid redefinitions")
Reported-by: Colin Ian King <[email protected]>
Signed-off-by: Alexandra Winter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/net/ctcm_sysfs.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/s390/net/ctcm_sysfs.c b/drivers/s390/net/ctcm_sysfs.c
index ddb0aa321339..07b7177abf26 100644
--- a/drivers/s390/net/ctcm_sysfs.c
+++ b/drivers/s390/net/ctcm_sysfs.c
@@ -38,11 +38,12 @@ static ssize_t ctcm_buffer_write(struct device *dev,
struct ctcm_priv *priv = dev_get_drvdata(dev);
int rc;
- ndev = priv->channel[CTCM_READ]->netdev;
- if (!(priv && priv->channel[CTCM_READ] && ndev)) {
+ if (!(priv && priv->channel[CTCM_READ] &&
+ priv->channel[CTCM_READ]->netdev)) {
CTCM_DBF_TEXT(SETUP, CTC_DBF_ERROR, "bfnondev");
return -ENODEV;
}
+ ndev = priv->channel[CTCM_READ]->netdev;
rc = kstrtouint(buf, 0, &bs1);
if (rc)
--
2.35.1
Hi!
> This is the start of the stable review cycle for the 4.9.315 release.
> There are 19 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.9.y
Tested-by: Pavel Machek (CIP) <[email protected]>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Mon, May 16, 2022 at 09:36:13PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.315 release.
> There are 19 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 18 May 2022 19:36:02 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 163 pass: 163 fail: 0
Qemu test results:
total: 397 pass: 397 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On Tue, 17 May 2022 at 01:07, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.9.315 release.
> There are 19 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 18 May 2022 19:36:02 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.315-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 4.9.315-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.9.y
* git commit: f71a7b3321693ff2eb8f97a521ad23ca53934428
* git describe: v4.9.314-20-gf71a7b332169
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.9.y/build/v4.9.314-20-gf71a7b332169
## Test Regressions (compared to v4.9.313-8-g0d0d580b3778)
No test regressions found.
## Metric Regressions (compared to v4.9.313-8-g0d0d580b3778)
No metric regressions found.
## Test Fixes (compared to v4.9.313-8-g0d0d580b3778)
No test fixes found.
## Metric Fixes (compared to v4.9.313-8-g0d0d580b3778)
No metric fixes found.
## Test result summary
total: 80137, pass: 63338, fail: 858, skip: 13732, xfail: 2209
## Build Summary
* arm: 238 total, 238 passed, 0 failed
* arm64: 32 total, 32 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 22 total, 22 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 31 total, 31 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-inte[
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* ssuite
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org