The arm64 Guarded Control Stack (GCS) feature provides support for
hardware protected stacks of return addresses, intended to provide
hardening against return oriented programming (ROP) attacks and to make
it easier to gather call stacks for applications such as profiling.
When GCS is active a secondary stack called the Guarded Control Stack is
maintained, protected with a memory attribute which means that it can
only be written with specific GCS operations. The current GCS pointer
can not be directly written to by userspace. When a BL is executed the
value stored in LR is also pushed onto the GCS, and when a RET is
executed the top of the GCS is popped and compared to LR with a fault
being raised if the values do not match. GCS operations may only be
performed on GCS pages, a data abort is generated if they are not.
The combination of hardware enforcement and lack of extra instructions
in the function entry and exit paths should result in something which
has less overhead and is more difficult to attack than a purely software
implementation like clang's shadow stacks.
This series implements support for use of GCS by userspace, along with
support for use of GCS within KVM guests. It does not enable use of GCS
by either EL1 or EL2, this will be implemented separately. Executables
are started without GCS and must use a prctl() to enable it, it is
expected that this will be done very early in application execution by
the dynamic linker or other startup code. For dynamic linking this will
be done by checking that everything in the executable is marked as GCS
compatible.
x86 has an equivalent feature called shadow stacks, this series depends
on the x86 patches for generic memory management support for the new
guarded/shadow stack page type and shares APIs as much as possible. As
there has been extensive discussion with the wider community around the
ABI for shadow stacks I have as far as practical kept implementation
decisions close to those for x86, anticipating that review would lead to
similar conclusions in the absence of strong reasoning for divergence.
The main divergence I am concious of is that x86 allows shadow stack to
be enabled and disabled repeatedly, freeing the shadow stack for the
thread whenever disabled, while this implementation keeps the GCS
allocated after disable but refuses to reenable it. This is to avoid
races with things actively walking the GCS during a disable, we do
anticipate that some systems will wish to disable GCS at runtime but are
not aware of any demand for subsequently reenabling it.
x86 uses an arch_prctl() to manage enable and disable, since only x86
and S/390 use arch_prctl() a generic prctl() was proposed[1] as part of a
patch set for the equivalent RISC-V Zicfiss feature which I initially
adopted fairly directly but following review feedback has been revised
quite a bit.
We currently maintain the x86 pattern of implicitly allocating a shadow
stack for threads started with shadow stack enabled, there has been some
discussion of removing this support and requiring the use of clone3()
with explicit allocation of shadow stacks instead. I have no strong
feelings either way, implicit allocation is not really consistent with
anything else we do and creates the potential for errors around thread
exit but on the other hand it is existing ABI on x86 and minimises the
changes needed in userspace code.
There is an open issue with support for CRIU, on x86 this required the
ability to set the GCS mode via ptrace. This series supports
configuring mode bits other than enable/disable via ptrace but it needs
to be confirmed if this is sufficient.
The series depends on support for shadow stacks in clone3(), that series
includes the addition of ARCH_HAS_USER_SHADOW_STACK.
https://lore.kernel.org/r/[email protected]
It also depends on the addition of more waitpid() flags to nolibc:
https://lore.kernel.org/r/[email protected]
You can see a branch with the full set of dependencies against Linus'
tree at:
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc.git arm64-gcs
[1] https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Mark Brown <[email protected]>
---
Changes in v7:
- Rebase onto v6.7-rc2 via the clone3() patch series.
- Change the token used to cap the stack during signal handling to be
compatible with GCSPOPM.
- Fix flags for new page types.
- Fold in support for clone3().
- Replace copy_to_user_gcs() with put_user_gcs().
- Link to v6: https://lore.kernel.org/r/[email protected]
Changes in v6:
- Rebase onto v6.6-rc3.
- Add some more gcsb_dsync() barriers following spec clarifications.
- Due to ongoing discussion around clone()/clone3() I've not updated
anything there, the behaviour is the same as on previous versions.
- Link to v5: https://lore.kernel.org/r/[email protected]
Changes in v5:
- Don't map any permissions for user GCSs, we always use EL0 accessors
or use a separate mapping of the page.
- Reduce the standard size of the GCS to RLIMIT_STACK/2.
- Enforce a PAGE_SIZE alignment requirement on map_shadow_stack().
- Clarifications and fixes to documentation.
- More tests.
- Link to v4: https://lore.kernel.org/r/[email protected]
Changes in v4:
- Implement flags for map_shadow_stack() allowing the cap and end of
stack marker to be enabled independently or not at all.
- Relax size and alignment requirements for map_shadow_stack().
- Add more blurb explaining the advantages of hardware enforcement.
- Link to v3: https://lore.kernel.org/r/[email protected]
Changes in v3:
- Rebase onto v6.5-rc4.
- Add a GCS barrier on context switch.
- Add a GCS stress test.
- Link to v2: https://lore.kernel.org/r/[email protected]
Changes in v2:
- Rebase onto v6.5-rc3.
- Rework prctl() interface to allow each bit to be locked independently.
- map_shadow_stack() now places the cap token based on the size
requested by the caller not the actual space allocated.
- Mode changes other than enable via ptrace are now supported.
- Expand test coverage.
- Various smaller fixes and adjustments.
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Mark Brown (39):
arm64/mm: Restructure arch_validate_flags() for extensibility
prctl: arch-agnostic prctl for shadow stack
mman: Add map_shadow_stack() flags
arm64: Document boot requirements for Guarded Control Stacks
arm64/gcs: Document the ABI for Guarded Control Stacks
arm64/sysreg: Add new system registers for GCS
arm64/sysreg: Add definitions for architected GCS caps
arm64/gcs: Add manual encodings of GCS instructions
arm64/gcs: Provide put_user_gcs()
arm64/cpufeature: Runtime detection of Guarded Control Stack (GCS)
arm64/mm: Allocate PIE slots for EL0 guarded control stack
mm: Define VM_SHADOW_STACK for arm64 when we support GCS
arm64/mm: Map pages for guarded control stack
KVM: arm64: Manage GCS registers for guests
arm64/gcs: Allow GCS usage at EL0 and EL1
arm64/idreg: Add overrride for GCS
arm64/hwcap: Add hwcap for GCS
arm64/traps: Handle GCS exceptions
arm64/mm: Handle GCS data aborts
arm64/gcs: Context switch GCS state for EL0
arm64/gcs: Allocate a new GCS for threads with GCS enabled
arm64/gcs: Implement shadow stack prctl() interface
arm64/mm: Implement map_shadow_stack()
arm64/signal: Set up and restore the GCS context for signal handlers
arm64/signal: Expose GCS state in signal frames
arm64/ptrace: Expose GCS via ptrace and core files
arm64: Add Kconfig for Guarded Control Stack (GCS)
kselftest/arm64: Verify the GCS hwcap
kselftest/arm64: Add GCS as a detected feature in the signal tests
kselftest/arm64: Add framework support for GCS to signal handling tests
kselftest/arm64: Allow signals tests to specify an expected si_code
kselftest/arm64: Always run signals tests with GCS enabled
kselftest/arm64: Add very basic GCS test program
kselftest/arm64: Add a GCS test program built with the system libc
kselftest/arm64: Add test coverage for GCS mode locking
selftests/arm64: Add GCS signal tests
kselftest/arm64: Add a GCS stress test
kselftest/arm64: Enable GCS for the FP stress tests
kselftest/clone3: Enable GCS in the clone3 selftests
Documentation/admin-guide/kernel-parameters.txt | 6 +
Documentation/arch/arm64/booting.rst | 22 +
Documentation/arch/arm64/elf_hwcaps.rst | 3 +
Documentation/arch/arm64/gcs.rst | 233 +++++++
Documentation/arch/arm64/index.rst | 1 +
Documentation/filesystems/proc.rst | 2 +-
arch/arm64/Kconfig | 20 +
arch/arm64/include/asm/cpufeature.h | 6 +
arch/arm64/include/asm/el2_setup.h | 17 +
arch/arm64/include/asm/esr.h | 28 +-
arch/arm64/include/asm/exception.h | 2 +
arch/arm64/include/asm/gcs.h | 107 +++
arch/arm64/include/asm/hwcap.h | 1 +
arch/arm64/include/asm/kvm_arm.h | 4 +-
arch/arm64/include/asm/kvm_host.h | 12 +
arch/arm64/include/asm/mman.h | 23 +-
arch/arm64/include/asm/pgtable-prot.h | 14 +-
arch/arm64/include/asm/processor.h | 7 +
arch/arm64/include/asm/sysreg.h | 20 +
arch/arm64/include/asm/uaccess.h | 40 ++
arch/arm64/include/uapi/asm/hwcap.h | 1 +
arch/arm64/include/uapi/asm/ptrace.h | 8 +
arch/arm64/include/uapi/asm/sigcontext.h | 9 +
arch/arm64/kernel/cpufeature.c | 19 +
arch/arm64/kernel/cpuinfo.c | 1 +
arch/arm64/kernel/entry-common.c | 23 +
arch/arm64/kernel/idreg-override.c | 2 +
arch/arm64/kernel/process.c | 81 +++
arch/arm64/kernel/ptrace.c | 59 ++
arch/arm64/kernel/signal.c | 236 ++++++-
arch/arm64/kernel/traps.c | 11 +
arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h | 17 +
arch/arm64/kvm/sys_regs.c | 22 +
arch/arm64/mm/Makefile | 1 +
arch/arm64/mm/fault.c | 79 ++-
arch/arm64/mm/gcs.c | 259 +++++++
arch/arm64/mm/mmap.c | 13 +-
arch/arm64/tools/cpucaps | 1 +
arch/arm64/tools/sysreg | 55 ++
arch/x86/include/uapi/asm/mman.h | 3 -
fs/proc/task_mmu.c | 3 +
include/linux/mm.h | 16 +-
include/uapi/asm-generic/mman.h | 4 +
include/uapi/linux/elf.h | 1 +
include/uapi/linux/prctl.h | 22 +
kernel/sys.c | 30 +
tools/testing/selftests/arm64/Makefile | 2 +-
tools/testing/selftests/arm64/abi/hwcap.c | 19 +
tools/testing/selftests/arm64/fp/assembler.h | 15 +
tools/testing/selftests/arm64/fp/fpsimd-test.S | 2 +
tools/testing/selftests/arm64/fp/sve-test.S | 2 +
tools/testing/selftests/arm64/fp/za-test.S | 2 +
tools/testing/selftests/arm64/fp/zt-test.S | 2 +
tools/testing/selftests/arm64/gcs/.gitignore | 5 +
tools/testing/selftests/arm64/gcs/Makefile | 24 +
tools/testing/selftests/arm64/gcs/asm-offsets.h | 0
tools/testing/selftests/arm64/gcs/basic-gcs.c | 428 ++++++++++++
tools/testing/selftests/arm64/gcs/gcs-locking.c | 200 ++++++
.../selftests/arm64/gcs/gcs-stress-thread.S | 311 +++++++++
tools/testing/selftests/arm64/gcs/gcs-stress.c | 532 +++++++++++++++
tools/testing/selftests/arm64/gcs/gcs-util.h | 100 +++
tools/testing/selftests/arm64/gcs/libc-gcs.c | 742 +++++++++++++++++++++
tools/testing/selftests/arm64/signal/.gitignore | 1 +
.../testing/selftests/arm64/signal/test_signals.c | 17 +-
.../testing/selftests/arm64/signal/test_signals.h | 6 +
.../selftests/arm64/signal/test_signals_utils.c | 32 +-
.../selftests/arm64/signal/test_signals_utils.h | 39 ++
.../arm64/signal/testcases/gcs_exception_fault.c | 59 ++
.../selftests/arm64/signal/testcases/gcs_frame.c | 78 +++
.../arm64/signal/testcases/gcs_write_fault.c | 67 ++
.../selftests/arm64/signal/testcases/testcases.c | 7 +
.../selftests/arm64/signal/testcases/testcases.h | 1 +
tools/testing/selftests/clone3/clone3.c | 37 +
73 files changed, 4234 insertions(+), 40 deletions(-)
---
base-commit: 3d0134d322380292c055454d9633738733992d61
change-id: 20230303-arm64-gcs-e311ab0d8729
Best regards,
--
Mark Brown <[email protected]>
Three architectures (x86, aarch64, riscv) have announced support for
shadow stacks with fairly similar functionality. While x86 is using
arch_prctl() to control the functionality neither arm64 nor riscv uses
that interface so this patch adds arch-agnostic prctl() support to
get and set status of shadow stacks and lock the current configuation to
prevent further changes, with support for turning on and off individual
subfeatures so applications can limit their exposure to features that
they do not need. The features are:
- PR_SHADOW_STACK_ENABLE: Tracking and enforcement of shadow stacks,
including allocation of a shadow stack if one is not already
allocated.
- PR_SHADOW_STACK_WRITE: Writes to specific addresses in the shadow
stack.
- PR_SHADOW_STACK_PUSH: Push additional values onto the shadow stack.
These features are expected to be inherited by new threads and cleared
on exec(), unknown features should be rejected for enable but accepted
for locking (in order to allow for future proofing).
This is based on a patch originally written by Deepak Gupta but modified
fairly heavily, support for indirect landing pads is removed, additional
modes added and the locking interface reworked. The set status prctl()
is also reworked to just set flags, if setting/reading the shadow stack
pointer is required this could be a separate prctl.
Signed-off-by: Mark Brown <[email protected]>
---
include/linux/mm.h | 4 ++++
include/uapi/linux/prctl.h | 22 ++++++++++++++++++++++
kernel/sys.c | 30 ++++++++++++++++++++++++++++++
3 files changed, 56 insertions(+)
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 10462f354614..8b28483b4afa 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -4143,4 +4143,8 @@ static inline bool pfn_is_unaccepted_memory(unsigned long pfn)
return range_contains_unaccepted_memory(paddr, paddr + PAGE_SIZE);
}
+int arch_get_shadow_stack_status(struct task_struct *t, unsigned long __user *status);
+int arch_set_shadow_stack_status(struct task_struct *t, unsigned long status);
+int arch_lock_shadow_stack_status(struct task_struct *t, unsigned long status);
+
#endif /* _LINUX_MM_H */
diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
index 370ed14b1ae0..3c66ed8f46d8 100644
--- a/include/uapi/linux/prctl.h
+++ b/include/uapi/linux/prctl.h
@@ -306,4 +306,26 @@ struct prctl_mm_map {
# define PR_RISCV_V_VSTATE_CTRL_NEXT_MASK 0xc
# define PR_RISCV_V_VSTATE_CTRL_MASK 0x1f
+/*
+ * Get the current shadow stack configuration for the current thread,
+ * this will be the value configured via PR_SET_SHADOW_STACK_STATUS.
+ */
+#define PR_GET_SHADOW_STACK_STATUS 71
+
+/*
+ * Set the current shadow stack configuration. Enabling the shadow
+ * stack will cause a shadow stack to be allocated for the thread.
+ */
+#define PR_SET_SHADOW_STACK_STATUS 72
+# define PR_SHADOW_STACK_ENABLE (1UL << 0)
+# define PR_SHADOW_STACK_WRITE (1UL << 1)
+# define PR_SHADOW_STACK_PUSH (1UL << 2)
+
+/*
+ * Prevent further changes to the specified shadow stack
+ * configuration. All bits may be locked via this call, including
+ * undefined bits.
+ */
+#define PR_LOCK_SHADOW_STACK_STATUS 73
+
#endif /* _LINUX_PRCTL_H */
diff --git a/kernel/sys.c b/kernel/sys.c
index e219fcfa112d..96e8a6b5993a 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -2301,6 +2301,21 @@ int __weak arch_prctl_spec_ctrl_set(struct task_struct *t, unsigned long which,
return -EINVAL;
}
+int __weak arch_get_shadow_stack_status(struct task_struct *t, unsigned long __user *status)
+{
+ return -EINVAL;
+}
+
+int __weak arch_set_shadow_stack_status(struct task_struct *t, unsigned long status)
+{
+ return -EINVAL;
+}
+
+int __weak arch_lock_shadow_stack_status(struct task_struct *t, unsigned long status)
+{
+ return -EINVAL;
+}
+
#define PR_IO_FLUSHER (PF_MEMALLOC_NOIO | PF_LOCAL_THROTTLE)
#ifdef CONFIG_ANON_VMA_NAME
@@ -2743,6 +2758,21 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
case PR_RISCV_V_GET_CONTROL:
error = RISCV_V_GET_CONTROL();
break;
+ case PR_GET_SHADOW_STACK_STATUS:
+ if (arg3 || arg4 || arg5)
+ return -EINVAL;
+ error = arch_get_shadow_stack_status(me, (unsigned long __user *) arg2);
+ break;
+ case PR_SET_SHADOW_STACK_STATUS:
+ if (arg3 || arg4 || arg5)
+ return -EINVAL;
+ error = arch_set_shadow_stack_status(me, arg2);
+ break;
+ case PR_LOCK_SHADOW_STACK_STATUS:
+ if (arg3 || arg4 || arg5)
+ return -EINVAL;
+ error = arch_lock_shadow_stack_status(me, arg2);
+ break;
default:
error = -EINVAL;
break;
--
2.39.2
Add some documentation of the userspace ABI for Guarded Control Stacks.
Signed-off-by: Mark Brown <[email protected]>
---
Documentation/arch/arm64/gcs.rst | 233 +++++++++++++++++++++++++++++++++++++
Documentation/arch/arm64/index.rst | 1 +
2 files changed, 234 insertions(+)
diff --git a/Documentation/arch/arm64/gcs.rst b/Documentation/arch/arm64/gcs.rst
new file mode 100644
index 000000000000..c45c0326836a
--- /dev/null
+++ b/Documentation/arch/arm64/gcs.rst
@@ -0,0 +1,233 @@
+===============================================
+Guarded Control Stack support for AArch64 Linux
+===============================================
+
+This document outlines briefly the interface provided to userspace by Linux in
+order to support use of the ARM Guarded Control Stack (GCS) feature.
+
+This is an outline of the most important features and issues only and not
+intended to be exhaustive.
+
+
+
+1. General
+-----------
+
+* GCS is an architecture feature intended to provide greater protection
+ against return oriented programming (ROP) attacks and to simplify the
+ implementation of features that need to collect stack traces such as
+ profiling.
+
+* When GCS is enabled a separate guarded control stack is maintained by the
+ PE which is writeable only through specific GCS operations. This
+ stores the call stack only, when a procedure call instruction is
+ performed the current PC is pushed onto the GCS and on RET the
+ address in the LR is verified against that on the top of the GCS.
+
+* When active current GCS pointer is stored in the system register
+ GCSPR_EL0. This is readable by userspace but can only be updated
+ via specific GCS instructions.
+
+* The architecture provides instructions for switching between guarded
+ control stacks with checks to ensure that the new stack is a valid
+ target for switching.
+
+* The functionality of GCS is similar to that provided by the x86 Shadow
+ Stack feature, due to sharing of userspace interfaces the ABI refers to
+ shadow stacks rather than GCS.
+
+* Support for GCS is reported to userspace via HWCAP2_GCS in the aux vector
+ AT_HWCAP2 entry.
+
+* GCS is enabled per thread. While there is support for disabling GCS
+ at runtime this should be done with great care.
+
+* GCS memory access faults are reported as normal memory access faults.
+
+* GCS specific errors (those reported with EC 0x2d) will be reported as
+ SIGSEGV with a si_code of SEGV_CPERR (control protection error).
+
+* GCS is supported only for AArch64.
+
+* On systems where GCS is supported GCSPR_EL0 is always readable by EL0
+ regardless of the GCS configuration for the thread.
+
+* The architecture supports enabling GCS without verifying that return values
+ in LR match those in the GCS, the LR will be ignored. This is not supported
+ by Linux.
+
+* EL0 GCS entries with bit 63 set are reserved for use, one such use is defined
+ below for signals and should be ignored when parsing the stack if not
+ understood.
+
+
+2. Enabling and disabling Guarded Control Stacks
+-------------------------------------------------
+
+* GCS is enabled and disabled for a thread via the PR_SET_SHADOW_STACK_STATUS
+ prctl(), this takes a single flags argument specifying which GCS features
+ should be used.
+
+* When set PR_SHADOW_STACK_ENABLE flag allocates a Guarded Control Stack
+ and enables GCS for the thread, enabling the functionality controlled by
+ GCSCRE0_EL1.{nTR, RVCHKEN, PCRSEL}.
+
+* When set the PR_SHADOW_STACK_PUSH flag enables the functionality controlled
+ by GCSCRE0_EL1.PUSHMEn, allowing explicit GCS pushes.
+
+* When set the PR_SHADOW_STACK_WRITE flag enables the functionality controlled
+ by GCSCRE0_EL1.STREn, allowing explicit stores to the Guarded Control Stack.
+
+* Any unknown flags will cause PR_SET_SHADOW_STACK_STATUS to return -EINVAL.
+
+* PR_LOCK_SHADOW_STACK_STATUS is passed a bitmask of features with the same
+ values as used for PR_SET_SHADOW_STACK_STATUS. Any future changes to the
+ status of the specified GCS mode bits will be rejected.
+
+* PR_LOCK_SHADOW_STACK_STATUS allows any bit to be locked, this allows
+ userspace to prevent changes to any future features.
+
+* There is no support for a process to remove a lock that has been set for
+ it.
+
+* PR_SET_SHADOW_STACK_STATUS and PR_LOCK_SHADOW_STACK_STATUS affect only the
+ thread that called them, any other running threads will be unaffected.
+
+* New threads inherit the GCS configuration of the thread that created them.
+
+* GCS is disabled on exec().
+
+* The current GCS configuration for a thread may be read with the
+ PR_GET_SHADOW_STACK_STATUS prctl(), this returns the same flags that
+ are passed to PR_SET_SHADOW_STACK_STATUS.
+
+* If GCS is disabled for a thread after having previously been enabled then
+ the stack will remain allocated for the lifetime of the thread. At present
+ any attempt to reenable GCS for the thread will be rejected, this may be
+ revisited in future.
+
+* It should be noted that since enabling GCS will result in GCS becoming
+ active immediately it is not normally possible to return from the function
+ that invoked the prctl() that enabled GCS. It is expected that the normal
+ usage will be that GCS is enabled very early in execution of a program.
+
+
+
+3. Allocation of Guarded Control Stacks
+----------------------------------------
+
+* When GCS is enabled for a thread a new Guarded Control Stack will be
+ allocated for it of size RLIMIT_STACK or 4 gigabytes, whichever is
+ smaller.
+
+* When a new thread is created by a thread which has GCS enabled then a
+ new Guarded Control Stack will be allocated for the new thread with
+ half the size of the standard stack.
+
+* When a stack is allocated by enabling GCS or during thread creation then
+ the top 8 bytes of the stack will be initialised to 0 and GCSPR_EL0 will
+ be set to point to the address of this 0 value, this can be used to
+ detect the top of the stack.
+
+* Additional Guarded Control Stacks can be allocated using the
+ map_shadow_stack() system call.
+
+* Stacks allocated using map_shadow_stack() can optionally have an end of
+ stack marker and cap placed at the top of the stack. If the flag
+ SHADOW_STACK_SET_TOKEN is specified a cap will be placed on the stack,
+ if SHADOW_STACK_SET_MARKER is not specified the cap will be the top 8
+ bytes of the stack and if it is specified then the cap will be the next
+ 8 bytes. While specifying just SHADOW_STACK_SET_MARKER by itself is
+ valid since the marker is all bits 0 it has no observable effect.
+
+* Stacks allocated using map_shadow_stack() must have a size which is a
+ multiple of 8 bytes larger than 8 bytes and must be 8 bytes aligned.
+
+* An address can be specified to map_shadow_stack(), if one is provided then
+ it must be aligned to a page boundary.
+
+* When a thread is freed the Guarded Control Stack initially allocated for
+ that thread will be freed. Note carefully that if the stack has been
+ switched this may not be the stack currently in use by the thread.
+
+
+4. Signal handling
+--------------------
+
+* A new signal frame record gcs_context encodes the current GCS mode and
+ pointer for the interrupted context on signal delivery. This will always
+ be present on systems that support GCS.
+
+* The record contains a flag field which reports the current GCS configuration
+ for the interrupted context as PR_GET_SHADOW_STACK_STATUS would.
+
+* The signal handler is run with the same GCS configuration as the interrupted
+ context.
+
+* When GCS is enabled for the interrupted thread a signal handling specific
+ GCS cap token will be written to the GCS, this is an architectural GCS cap
+ token with bit 63 set and the token type (bits 0..11) all clear. The
+ GCSPR_EL0 reported in the signal frame will point to this cap token.
+
+* The signal handler will use the same GCS as the interrupted context.
+
+* When GCS is enabled on signal entry a frame with the address of the signal
+ return handler will be pushed onto the GCS, allowing return from the signal
+ handler via RET as normal. This will not be reported in the gcs_context in
+ the signal frame.
+
+
+5. Signal return
+-----------------
+
+When returning from a signal handler:
+
+* If there is a gcs_context record in the signal frame then the GCS flags
+ and GCSPR_EL0 will be restored from that context prior to further
+ validation.
+
+* If there is no gcs_context record in the signal frame then the GCS
+ configuration will be unchanged.
+
+* If GCS is enabled on return from a signal handler then GCSPR_EL0 must
+ point to a valid GCS signal cap record, this will be popped from the
+ GCS prior to signal return.
+
+* If the GCS configuration is locked when returning from a signal then any
+ attempt to change the GCS configuration will be treated as an error. This
+ is true even if GCS was not enabled prior to signal entry.
+
+* GCS may be disabled via signal return but any attempt to enable GCS via
+ signal return will be rejected.
+
+
+6. ptrace extensions
+---------------------
+
+* A new regset NT_ARM_GCS is defined for use with PTRACE_GETREGSET and
+ PTRACE_SETREGSET.
+
+* Due to the complexity surrounding allocation and deallocation of stacks and
+ lack of practical application it is not possible to enable GCS via ptrace.
+ GCS may be disabled via the ptrace interface.
+
+* Other GCS modes may be configured via ptrace.
+
+* Configuration via ptrace ignores locking of GCS mode bits.
+
+
+7. ELF coredump extensions
+---------------------------
+
+* NT_ARM_GCS notes will be added to each coredump for each thread of the
+ dumped process. The contents will be equivalent to the data that would
+ have been read if a PTRACE_GETREGSET of the corresponding type were
+ executed for each thread when the coredump was generated.
+
+
+
+8. /proc extensions
+--------------------
+
+* Guarded Control Stack pages will include "ss" in their VmFlags in
+ /proc/<pid>/smaps.
diff --git a/Documentation/arch/arm64/index.rst b/Documentation/arch/arm64/index.rst
index d08e924204bf..dcf3ee3eb8c0 100644
--- a/Documentation/arch/arm64/index.rst
+++ b/Documentation/arch/arm64/index.rst
@@ -14,6 +14,7 @@ ARM64 Architecture
booting
cpu-feature-registers
elf_hwcaps
+ gcs
hugetlbpage
kdump
legacy_instructions
--
2.39.2
The architecture defines a format for guarded control stack caps, used
to mark the top of an unused GCS in order to limit the potential for
exploitation via stack switching. Add definitions associated with these.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/include/asm/sysreg.h | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 5e65f51c10d2..75a49b41fa93 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -1039,6 +1039,26 @@
#define PIRx_ELx_PERM(idx, perm) ((perm) << ((idx) * 4))
+/*
+ * Definitions for Guarded Control Stack
+ */
+
+#define GCS_CAP_ADDR_MASK GENMASK(63, 12)
+#define GCS_CAP_ADDR_SHIFT 12
+#define GCS_CAP_ADDR_WIDTH 52
+#define GCS_CAP_ADDR(x) FIELD_GET(GCS_CAP_ADDR_MASK, x)
+
+#define GCS_CAP_TOKEN_MASK GENMASK(11, 0)
+#define GCS_CAP_TOKEN_SHIFT 0
+#define GCS_CAP_TOKEN_WIDTH 12
+#define GCS_CAP_TOKEN(x) FIELD_GET(GCS_CAP_TOKEN_MASK, x)
+
+#define GCS_CAP_VALID_TOKEN 0x1
+#define GCS_CAP_IN_PROGRESS_TOKEN 0x5
+
+#define GCS_CAP(x) ((((unsigned long)x) & GCS_CAP_ADDR_MASK) | \
+ GCS_CAP_VALID_TOKEN)
+
#define ARM64_FEATURE_FIELD_BITS 4
/* Defined for compatibility only, do not add new users. */
--
2.39.2
FEAT_GCS introduces a number of new system registers. Add the registers
available up to EL2 to sysreg as per DDI0601 2022-12.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/tools/sysreg | 55 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/arm64/tools/sysreg b/arch/arm64/tools/sysreg
index 96cbeeab4eec..d2ee46b63482 100644
--- a/arch/arm64/tools/sysreg
+++ b/arch/arm64/tools/sysreg
@@ -1790,6 +1790,41 @@ Sysreg SMCR_EL1 3 0 1 2 6
Fields SMCR_ELx
EndSysreg
+SysregFields GCSCR_ELx
+Res0 63:10
+Field 9 STREn
+Field 8 PUSHMEn
+Res0 7
+Field 6 EXLOCKEN
+Field 5 RVCHKEN
+Res0 4:1
+Field 0 PCRSEL
+EndSysregFields
+
+Sysreg GCSCR_EL1 3 0 2 5 0
+Fields GCSCR_ELx
+EndSysreg
+
+SysregFields GCSPR_ELx
+Field 63:3 PTR
+Res0 2:0
+EndSysregFields
+
+Sysreg GCSPR_EL1 3 0 2 5 1
+Fields GCSPR_ELx
+EndSysreg
+
+Sysreg GCSCRE0_EL1 3 0 2 5 2
+Res0 63:11
+Field 10 nTR
+Field 9 STREn
+Field 8 PUSHMEn
+Res0 7:6
+Field 5 RVCHKEN
+Res0 4:1
+Field 0 PCRSEL
+EndSysreg
+
Sysreg ALLINT 3 0 4 3 0
Res0 63:14
Field 13 ALLINT
@@ -2020,6 +2055,10 @@ Field 4 DZP
Field 3:0 BS
EndSysreg
+Sysreg GCSPR_EL0 3 3 2 5 1
+Fields GCSPR_ELx
+EndSysreg
+
Sysreg SVCR 3 3 4 2 2
Res0 63:2
Field 1 ZA
@@ -2348,6 +2387,14 @@ Sysreg SMCR_EL2 3 4 1 2 6
Fields SMCR_ELx
EndSysreg
+Sysreg GCSCR_EL2 3 4 2 5 0
+Fields GCSCR_ELx
+EndSysreg
+
+Sysreg GCSPR_EL2 3 4 2 5 1
+Fields GCSPR_ELx
+EndSysreg
+
Sysreg DACR32_EL2 3 4 3 0 0
Res0 63:32
Field 31:30 D15
@@ -2407,6 +2454,14 @@ Sysreg SMCR_EL12 3 5 1 2 6
Fields SMCR_ELx
EndSysreg
+Sysreg GCSCR_EL12 3 5 2 5 0
+Fields GCSCR_ELx
+EndSysreg
+
+Sysreg GCSPR_EL12 3 5 2 5 1
+Fields GCSPR_ELx
+EndSysreg
+
Sysreg FAR_EL12 3 5 6 0 0
Field 63:0 ADDR
EndSysreg
--
2.39.2
Define C callable functions for GCS instructions used by the kernel. In
order to avoid ambitious toolchain requirements for GCS support these are
manually encoded, this means we have fixed register numbers which will be
a bit limiting for the compiler but none of these should be used in
sufficiently fast paths for this to be a problem.
Note that GCSSTTR is used to store to EL0.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/include/asm/gcs.h | 51 ++++++++++++++++++++++++++++++++++++++++
arch/arm64/include/asm/uaccess.h | 22 +++++++++++++++++
2 files changed, 73 insertions(+)
diff --git a/arch/arm64/include/asm/gcs.h b/arch/arm64/include/asm/gcs.h
new file mode 100644
index 000000000000..7c5e95218db6
--- /dev/null
+++ b/arch/arm64/include/asm/gcs.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2023 ARM Ltd.
+ */
+#ifndef __ASM_GCS_H
+#define __ASM_GCS_H
+
+#include <asm/types.h>
+#include <asm/uaccess.h>
+
+static inline void gcsb_dsync(void)
+{
+ asm volatile(".inst 0xd503227f" : : : "memory");
+}
+
+static inline void gcsstr(u64 *addr, u64 val)
+{
+ register u64 *_addr __asm__ ("x0") = addr;
+ register long _val __asm__ ("x1") = val;
+
+ /* GCSSTTR x1, x0 */
+ asm volatile(
+ ".inst 0xd91f1c01\n"
+ :
+ : "rZ" (_val), "r" (_addr)
+ : "memory");
+}
+
+static inline void gcsss1(u64 Xt)
+{
+ asm volatile (
+ "sys #3, C7, C7, #2, %0\n"
+ :
+ : "rZ" (Xt)
+ : "memory");
+}
+
+static inline u64 gcsss2(void)
+{
+ u64 Xt;
+
+ asm volatile(
+ "SYSL %0, #3, C7, C7, #3\n"
+ : "=r" (Xt)
+ :
+ : "memory");
+
+ return Xt;
+}
+
+#endif
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index 14be5000c5a0..22e10e79f56a 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -425,4 +425,26 @@ static inline size_t probe_subpage_writeable(const char __user *uaddr,
#endif /* CONFIG_ARCH_HAS_SUBPAGE_FAULTS */
+#ifdef CONFIG_ARM64_GCS
+
+static inline int gcssttr(unsigned long __user *addr, unsigned long val)
+{
+ register unsigned long __user *_addr __asm__ ("x0") = addr;
+ register unsigned long _val __asm__ ("x1") = val;
+ int err = 0;
+
+ /* GCSSTTR x1, x0 */
+ asm volatile(
+ "1: .inst 0xd91f1c01\n"
+ "2: \n"
+ _ASM_EXTABLE_UACCESS_ERR(1b, 2b, %w0)
+ : "+r" (err)
+ : "rZ" (_val), "r" (_addr)
+ : "memory");
+
+ return err;
+}
+
+#endif /* CONFIG_ARM64_GCS */
+
#endif /* __ASM_UACCESS_H */
--
2.39.2
In preparation for adding arm64 GCS support make the map_shadow_stack()
SHADOW_STACK_SET_TOKEN flag generic and add _SET_MARKER. The existing
flag indicats that a token usable for stack switch should be added to
the top of the newly mapped GCS region while the new flag indicates that
a top of stack marker suitable for use by unwinders should be added
above that.
For arm64 the top of stack marker is all bits 0.
Signed-off-by: Mark Brown <[email protected]>
---
arch/x86/include/uapi/asm/mman.h | 3 ---
include/uapi/asm-generic/mman.h | 4 ++++
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/x86/include/uapi/asm/mman.h b/arch/x86/include/uapi/asm/mman.h
index 46cdc941f958..ac1e6277212b 100644
--- a/arch/x86/include/uapi/asm/mman.h
+++ b/arch/x86/include/uapi/asm/mman.h
@@ -5,9 +5,6 @@
#define MAP_32BIT 0x40 /* only give out 32bit addresses */
#define MAP_ABOVE4G 0x80 /* only map above 4GB */
-/* Flags for map_shadow_stack(2) */
-#define SHADOW_STACK_SET_TOKEN (1ULL << 0) /* Set up a restore token in the shadow stack */
-
#include <asm-generic/mman.h>
#endif /* _ASM_X86_MMAN_H */
diff --git a/include/uapi/asm-generic/mman.h b/include/uapi/asm-generic/mman.h
index 57e8195d0b53..d6a282687af5 100644
--- a/include/uapi/asm-generic/mman.h
+++ b/include/uapi/asm-generic/mman.h
@@ -19,4 +19,8 @@
#define MCL_FUTURE 2 /* lock all future mappings */
#define MCL_ONFAULT 4 /* lock all pages that are faulted in */
+#define SHADOW_STACK_SET_TOKEN (1ULL << 0) /* Set up a restore token in the shadow stack */
+#define SHADOW_STACK_SET_MARKER (1ULL << 1) /* Set up a top of stack merker in the shadow stack */
+
+
#endif /* __ASM_GENERIC_MMAN_H */
--
2.39.2
Pages used for guarded control stacks need to be described to the hardware
using the Permission Indirection Extension, GCS is not supported without
PIE. In order to support copy on write for guarded stacks we allocate two
values, one for active GCSs and one for GCS pages marked as read only prior
to copy.
Since the actual effect is defined using PIE the specific bit pattern used
does not matter to the hardware but we choose two values which differ only
in PTE_WRITE in order to help share code with non-PIE cases.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/include/asm/pgtable-prot.h | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h
index e9624f6326dd..297a645e8a0f 100644
--- a/arch/arm64/include/asm/pgtable-prot.h
+++ b/arch/arm64/include/asm/pgtable-prot.h
@@ -127,15 +127,23 @@ extern bool arm64_use_ng_mappings;
/* 6: PTE_PXN | PTE_WRITE */
/* 7: PAGE_SHARED_EXEC PTE_PXN | PTE_WRITE | PTE_USER */
/* 8: PAGE_KERNEL_ROX PTE_UXN */
-/* 9: PTE_UXN | PTE_USER */
+/* 9: PAGE_GCS_RO PTE_UXN | PTE_USER */
/* a: PAGE_KERNEL_EXEC PTE_UXN | PTE_WRITE */
-/* b: PTE_UXN | PTE_WRITE | PTE_USER */
+/* b: PAGE_GCS PTE_UXN | PTE_WRITE | PTE_USER */
/* c: PAGE_KERNEL_RO PTE_UXN | PTE_PXN */
/* d: PAGE_READONLY PTE_UXN | PTE_PXN | PTE_USER */
/* e: PAGE_KERNEL PTE_UXN | PTE_PXN | PTE_WRITE */
/* f: PAGE_SHARED PTE_UXN | PTE_PXN | PTE_WRITE | PTE_USER */
+#define _PAGE_GCS (_PAGE_DEFAULT | PTE_NG | PTE_UXN | PTE_WRITE | PTE_USER)
+#define _PAGE_GCS_RO (_PAGE_DEFAULT | PTE_NG | PTE_UXN | PTE_USER)
+
+#define PAGE_GCS __pgprot(_PAGE_GCS)
+#define PAGE_GCS_RO __pgprot(_PAGE_GCS_RO)
+
#define PIE_E0 ( \
+ PIRx_ELx_PERM(pte_pi_index(_PAGE_GCS), PIE_GCS) | \
+ PIRx_ELx_PERM(pte_pi_index(_PAGE_GCS_RO), PIE_R) | \
PIRx_ELx_PERM(pte_pi_index(_PAGE_EXECONLY), PIE_X_O) | \
PIRx_ELx_PERM(pte_pi_index(_PAGE_READONLY_EXEC), PIE_RX) | \
PIRx_ELx_PERM(pte_pi_index(_PAGE_SHARED_EXEC), PIE_RWX) | \
@@ -143,6 +151,8 @@ extern bool arm64_use_ng_mappings;
PIRx_ELx_PERM(pte_pi_index(_PAGE_SHARED), PIE_RW))
#define PIE_E1 ( \
+ PIRx_ELx_PERM(pte_pi_index(_PAGE_GCS), PIE_NONE_O) | \
+ PIRx_ELx_PERM(pte_pi_index(_PAGE_GCS_RO), PIE_NONE_O) | \
PIRx_ELx_PERM(pte_pi_index(_PAGE_EXECONLY), PIE_NONE_O) | \
PIRx_ELx_PERM(pte_pi_index(_PAGE_READONLY_EXEC), PIE_R) | \
PIRx_ELx_PERM(pte_pi_index(_PAGE_SHARED_EXEC), PIE_RW) | \
--
2.39.2
Hook up an override for GCS, allowing it to be disabled from the command
line by specifying arm64.nogcs in case there are problems.
Signed-off-by: Mark Brown <[email protected]>
---
Documentation/admin-guide/kernel-parameters.txt | 6 ++++++
arch/arm64/kernel/idreg-override.c | 2 ++
2 files changed, 8 insertions(+)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 65731b060e3f..e2282f310ad7 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -418,9 +418,15 @@
arm64.nobti [ARM64] Unconditionally disable Branch Target
Identification support
+ arm64.nogcs [ARM64] Unconditionally disable Guarded Control Stack
+ support
+
arm64.nomops [ARM64] Unconditionally disable Memory Copy and Memory
Set instructions support
+ arm64.nopauth [ARM64] Unconditionally disable Pointer Authentication
+ support
+
arm64.nomte [ARM64] Unconditionally disable Memory Tagging Extension
support
diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c
index 3addc09f8746..cc059ba39d58 100644
--- a/arch/arm64/kernel/idreg-override.c
+++ b/arch/arm64/kernel/idreg-override.c
@@ -99,6 +99,7 @@ static const struct ftr_set_desc pfr1 __initconst = {
.override = &id_aa64pfr1_override,
.fields = {
FIELD("bt", ID_AA64PFR1_EL1_BT_SHIFT, NULL ),
+ FIELD("gcs", ID_AA64PFR1_EL1_GCS_SHIFT, NULL),
FIELD("mte", ID_AA64PFR1_EL1_MTE_SHIFT, NULL),
FIELD("sme", ID_AA64PFR1_EL1_SME_SHIFT, pfr1_sme_filter),
{}
@@ -178,6 +179,7 @@ static const struct {
{ "arm64.nosve", "id_aa64pfr0.sve=0" },
{ "arm64.nosme", "id_aa64pfr1.sme=0" },
{ "arm64.nobti", "id_aa64pfr1.bt=0" },
+ { "arm64.nogcs", "id_aa64pfr1.gcs=0" },
{ "arm64.nopauth",
"id_aa64isar1.gpi=0 id_aa64isar1.gpa=0 "
"id_aa64isar1.api=0 id_aa64isar1.apa=0 "
--
2.39.2
Use VM_HIGH_ARCH_5 for guarded control stack pages.
Signed-off-by: Mark Brown <[email protected]>
---
Documentation/filesystems/proc.rst | 2 +-
fs/proc/task_mmu.c | 3 +++
include/linux/mm.h | 12 +++++++++++-
3 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst
index 49ef12df631b..1dfc5cb20f28 100644
--- a/Documentation/filesystems/proc.rst
+++ b/Documentation/filesystems/proc.rst
@@ -570,7 +570,7 @@ encoded manner. The codes are the following:
mt arm64 MTE allocation tags are enabled
um userfaultfd missing tracking
uw userfaultfd wr-protect tracking
- ss shadow stack page
+ ss shadow/guarded control stack page
== =======================================
Note that there is no guarantee that every flag and associated mnemonic will
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index f0a904aeee8e..29fd7d6fbeb0 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -701,6 +701,9 @@ static void show_smap_vma_flags(struct seq_file *m, struct vm_area_struct *vma)
#endif /* CONFIG_HAVE_ARCH_USERFAULTFD_MINOR */
#ifdef CONFIG_ARCH_HAS_USER_SHADOW_STACK
[ilog2(VM_SHADOW_STACK)] = "ss",
+#endif
+#ifdef CONFIG_ARM64_GCS
+ [ilog2(VM_SHADOW_STACK)] = "ss",
#endif
};
size_t i;
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 8b28483b4afa..3c96fc6c1128 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -352,7 +352,17 @@ extern unsigned int kobjsize(const void *objp);
* for more details on the guard size.
*/
# define VM_SHADOW_STACK VM_HIGH_ARCH_5
-#else
+#endif
+
+#if defined(CONFIG_ARM64_GCS)
+/*
+ * arm64's Guarded Control Stack implements similar functionality and
+ * has similar constraints to shadow stacks.
+ */
+# define VM_SHADOW_STACK VM_HIGH_ARCH_5
+#endif
+
+#ifndef VM_SHADOW_STACK
# define VM_SHADOW_STACK VM_NONE
#endif
--
2.39.2
In order for EL1 to write to an EL0 GCS it must use the GCSSTTR instruction
rather than a normal STTR. Provide a put_user_gcs() which does this.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/include/asm/uaccess.h | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index 22e10e79f56a..e118c3d772c8 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -445,6 +445,24 @@ static inline int gcssttr(unsigned long __user *addr, unsigned long val)
return err;
}
+static inline void put_user_gcs(unsigned long val, unsigned long __user *addr,
+ int *err)
+{
+ int ret;
+
+ if (!access_ok((char __user *)addr, sizeof(u64))) {
+ *err = -EFAULT;
+ return;
+ }
+
+ uaccess_ttbr0_enable();
+ ret = gcssttr(addr, val);
+ if (ret != 0)
+ *err = ret;
+ uaccess_ttbr0_disable();
+}
+
+
#endif /* CONFIG_ARM64_GCS */
#endif /* __ASM_UACCESS_H */
--
2.39.2
GCS introduces a number of system registers for EL1 and EL0, on systems
with GCS we need to context switch them and expose them to VMMs to allow
guests to use GCS. Traps are already disabled.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/include/asm/kvm_host.h | 12 ++++++++++++
arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h | 17 +++++++++++++++++
arch/arm64/kvm/sys_regs.c | 22 ++++++++++++++++++++++
3 files changed, 51 insertions(+)
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 824f29f04916..2b09805da26a 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -401,6 +401,12 @@ enum vcpu_sysreg {
PIR_EL1, /* Permission Indirection Register 1 (EL1) */
PIRE0_EL1, /* Permission Indirection Register 0 (EL1) */
+ /* Guarded Control Stack registers */
+ GCSCRE0_EL1, /* Guarded Control Stack Control (EL0) */
+ GCSCR_EL1, /* Guarded Control Stack Control (EL1) */
+ GCSPR_EL0, /* Guarded Control Stack Pointer (EL0) */
+ GCSPR_EL1, /* Guarded Control Stack Pointer (EL1) */
+
/* 32bit specific registers. */
DACR32_EL2, /* Domain Access Control Register */
IFSR32_EL2, /* Instruction Fault Status Register */
@@ -1177,6 +1183,12 @@ bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu);
#define kvm_vm_has_ran_once(kvm) \
(test_bit(KVM_ARCH_FLAG_HAS_RAN_ONCE, &(kvm)->arch.flags))
+static inline bool has_gcs(void)
+{
+ return IS_ENABLED(CONFIG_ARM64_GCS) &&
+ cpus_have_final_cap(ARM64_HAS_GCS);
+}
+
int kvm_trng_call(struct kvm_vcpu *vcpu);
#ifdef CONFIG_KVM
extern phys_addr_t hyp_mem_base;
diff --git a/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h b/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
index bb6b571ec627..ec34d4a90717 100644
--- a/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
+++ b/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
@@ -25,6 +25,8 @@ static inline void __sysreg_save_user_state(struct kvm_cpu_context *ctxt)
{
ctxt_sys_reg(ctxt, TPIDR_EL0) = read_sysreg(tpidr_el0);
ctxt_sys_reg(ctxt, TPIDRRO_EL0) = read_sysreg(tpidrro_el0);
+ if (has_gcs())
+ ctxt_sys_reg(ctxt, GCSPR_EL0) = read_sysreg_s(SYS_GCSPR_EL0);
}
static inline bool ctxt_has_mte(struct kvm_cpu_context *ctxt)
@@ -62,6 +64,12 @@ static inline void __sysreg_save_el1_state(struct kvm_cpu_context *ctxt)
ctxt_sys_reg(ctxt, PAR_EL1) = read_sysreg_par();
ctxt_sys_reg(ctxt, TPIDR_EL1) = read_sysreg(tpidr_el1);
+ if (has_gcs()) {
+ ctxt_sys_reg(ctxt, GCSPR_EL1) = read_sysreg_el1(SYS_GCSPR);
+ ctxt_sys_reg(ctxt, GCSCR_EL1) = read_sysreg_el1(SYS_GCSCR);
+ ctxt_sys_reg(ctxt, GCSCRE0_EL1) = read_sysreg_s(SYS_GCSCRE0_EL1);
+ }
+
if (ctxt_has_mte(ctxt)) {
ctxt_sys_reg(ctxt, TFSR_EL1) = read_sysreg_el1(SYS_TFSR);
ctxt_sys_reg(ctxt, TFSRE0_EL1) = read_sysreg_s(SYS_TFSRE0_EL1);
@@ -95,6 +103,8 @@ static inline void __sysreg_restore_user_state(struct kvm_cpu_context *ctxt)
{
write_sysreg(ctxt_sys_reg(ctxt, TPIDR_EL0), tpidr_el0);
write_sysreg(ctxt_sys_reg(ctxt, TPIDRRO_EL0), tpidrro_el0);
+ if (has_gcs())
+ write_sysreg_s(ctxt_sys_reg(ctxt, GCSPR_EL0), SYS_GCSPR_EL0);
}
static inline void __sysreg_restore_el1_state(struct kvm_cpu_context *ctxt)
@@ -138,6 +148,13 @@ static inline void __sysreg_restore_el1_state(struct kvm_cpu_context *ctxt)
write_sysreg(ctxt_sys_reg(ctxt, PAR_EL1), par_el1);
write_sysreg(ctxt_sys_reg(ctxt, TPIDR_EL1), tpidr_el1);
+ if (has_gcs()) {
+ write_sysreg_el1(ctxt_sys_reg(ctxt, GCSPR_EL1), SYS_GCSPR);
+ write_sysreg_el1(ctxt_sys_reg(ctxt, GCSCR_EL1), SYS_GCSCR);
+ write_sysreg_s(ctxt_sys_reg(ctxt, GCSCRE0_EL1),
+ SYS_GCSCRE0_EL1);
+ }
+
if (ctxt_has_mte(ctxt)) {
write_sysreg_el1(ctxt_sys_reg(ctxt, TFSR_EL1), SYS_TFSR);
write_sysreg_s(ctxt_sys_reg(ctxt, TFSRE0_EL1), SYS_TFSRE0_EL1);
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 4735e1b37fb3..300719f82dd1 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1876,6 +1876,23 @@ static unsigned int mte_visibility(const struct kvm_vcpu *vcpu,
.visibility = mte_visibility, \
}
+static unsigned int gcs_visibility(const struct kvm_vcpu *vcpu,
+ const struct sys_reg_desc *rd)
+{
+ if (has_gcs())
+ return 0;
+
+ return REG_HIDDEN;
+}
+
+#define GCS_REG(name) { \
+ SYS_DESC(SYS_##name), \
+ .access = undef_access, \
+ .reset = reset_unknown, \
+ .reg = name, \
+ .visibility = gcs_visibility, \
+}
+
static unsigned int el2_visibility(const struct kvm_vcpu *vcpu,
const struct sys_reg_desc *rd)
{
@@ -2223,6 +2240,10 @@ static const struct sys_reg_desc sys_reg_descs[] = {
PTRAUTH_KEY(APDB),
PTRAUTH_KEY(APGA),
+ GCS_REG(GCSCR_EL1),
+ GCS_REG(GCSPR_EL1),
+ GCS_REG(GCSCRE0_EL1),
+
{ SYS_DESC(SYS_SPSR_EL1), access_spsr},
{ SYS_DESC(SYS_ELR_EL1), access_elr},
@@ -2309,6 +2330,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
{ SYS_DESC(SYS_SMIDR_EL1), undef_access },
{ SYS_DESC(SYS_CSSELR_EL1), access_csselr, reset_unknown, CSSELR_EL1 },
{ SYS_DESC(SYS_CTR_EL0), access_ctr },
+ GCS_REG(GCSPR_EL0),
{ SYS_DESC(SYS_SVCR), undef_access },
{ PMU_SYS_REG(PMCR_EL0), .access = access_pmcr, .reset = reset_pmcr,
--
2.39.2
All GCS operations at EL0 must happen on a page which is marked as
having UnprivGCS access, including read operations. If a GCS operation
attempts to access a page without this then it will generate a data
abort with the GCS bit set in ESR_EL1.ISS2.
EL0 may validly generate such faults, for example due to copy on write
which will cause the GCS data to be stored in a read only page with no
GCS permissions until the actual copy happens. Since UnprivGCS allows
both reads and writes to the GCS (though only through GCS operations) we
need to ensure that the memory management subsystem handles GCS accesses
as writes at all times. Do this by adding FAULT_FLAG_WRITE to any GCS
page faults, adding handling to ensure that invalid cases are identfied
as such early so the memory management core does not think they will
succeed. The core cannot distinguish between VMAs which are generally
writeable and VMAs which are only writeable through GCS operations.
EL1 may validly write to EL0 GCS for management purposes (eg, while
initialising with cap tokens).
We also report any GCS faults in VMAs not marked as part of a GCS as
access violations, causing a fault to be delivered to userspace if it
attempts to do GCS operations outside a GCS.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/mm/fault.c | 79 +++++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 71 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 460d799e1296..28de0807b4a1 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -494,13 +494,30 @@ static void do_bad_area(unsigned long far, unsigned long esr,
}
}
+/*
+ * Note: not valid for EL1 DC IVAC, but we never use that such that it
+ * should fault. EL0 cannot issue DC IVAC (undef).
+ */
+static bool is_write_abort(unsigned long esr)
+{
+ return (esr & ESR_ELx_WNR) && !(esr & ESR_ELx_CM);
+}
+
+static bool is_gcs_fault(unsigned long esr)
+{
+ if (!esr_is_data_abort(esr))
+ return false;
+
+ return ESR_ELx_ISS2(esr) & ESR_ELx_GCS;
+}
+
#define VM_FAULT_BADMAP ((__force vm_fault_t)0x010000)
#define VM_FAULT_BADACCESS ((__force vm_fault_t)0x020000)
static vm_fault_t __do_page_fault(struct mm_struct *mm,
struct vm_area_struct *vma, unsigned long addr,
unsigned int mm_flags, unsigned long vm_flags,
- struct pt_regs *regs)
+ unsigned long esr, struct pt_regs *regs)
{
/*
* Ok, we have a good vm_area for this memory access, so we can handle
@@ -510,6 +527,26 @@ static vm_fault_t __do_page_fault(struct mm_struct *mm,
*/
if (!(vma->vm_flags & vm_flags))
return VM_FAULT_BADACCESS;
+
+ if (vma->vm_flags & VM_SHADOW_STACK) {
+ /*
+ * Writes to a GCS must either be generated by a GCS
+ * operation or be from EL1.
+ */
+ if (is_write_abort(esr) &&
+ !(is_gcs_fault(esr) || is_el1_data_abort(esr)))
+ return VM_FAULT_BADACCESS;
+ } else {
+ /*
+ * GCS faults should never happen for pages that are
+ * not part of a GCS and the operation being attempted
+ * can never succeed.
+ */
+ if (is_gcs_fault(esr))
+ return VM_FAULT_BADACCESS;
+ }
+
+
return handle_mm_fault(vma, addr, mm_flags, regs);
}
@@ -518,13 +555,18 @@ static bool is_el0_instruction_abort(unsigned long esr)
return ESR_ELx_EC(esr) == ESR_ELx_EC_IABT_LOW;
}
-/*
- * Note: not valid for EL1 DC IVAC, but we never use that such that it
- * should fault. EL0 cannot issue DC IVAC (undef).
- */
-static bool is_write_abort(unsigned long esr)
+static bool is_invalid_el0_gcs_access(struct vm_area_struct *vma, u64 esr)
{
- return (esr & ESR_ELx_WNR) && !(esr & ESR_ELx_CM);
+ if (!system_supports_gcs())
+ return false;
+ if (likely(!(vma->vm_flags & VM_SHADOW_STACK))) {
+ if (is_gcs_fault(esr))
+ return true;
+ return false;
+ }
+ if (is_gcs_fault(esr))
+ return false;
+ return is_write_abort(esr);
}
static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
@@ -573,6 +615,13 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
/* If EPAN is absent then exec implies read */
if (!alternative_has_cap_unlikely(ARM64_HAS_EPAN))
vm_flags |= VM_EXEC;
+ /*
+ * Upgrade read faults to write faults, GCS reads must
+ * occur on a page marked as GCS so we need to trigger
+ * copy on write always.
+ */
+ if (is_gcs_fault(esr))
+ mm_flags |= FAULT_FLAG_WRITE;
}
if (is_ttbr0_addr(addr) && is_el1_permission_fault(addr, esr, regs)) {
@@ -594,6 +643,20 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
if (!vma)
goto lock_mmap;
+ /*
+ * We get legitimate write faults for GCS pages from GCS
+ * operations, even when the initial operation was a read, as
+ * a result of upgrading GCS accesses to writes for CoW but
+ * GCS acceses outside of a GCS must fail. Specifically check
+ * for this since the mm core isn't able to distinguish
+ * invalid GCS access from valid ones and will try to resolve
+ * the fault.
+ */
+ if (is_invalid_el0_gcs_access(vma, esr)) {
+ vma_end_read(vma);
+ goto lock_mmap;
+ }
+
if (!(vma->vm_flags & vm_flags)) {
vma_end_read(vma);
goto lock_mmap;
@@ -623,7 +686,7 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
goto done;
}
- fault = __do_page_fault(mm, vma, addr, mm_flags, vm_flags, regs);
+ fault = __do_page_fault(mm, vma, addr, mm_flags, vm_flags, esr, regs);
/* Quick path to respond to signals */
if (fault_signal_pending(fault, regs)) {
--
2.39.2
FEAT_GCS introduces a number of new system registers, we require that
access to these registers is not trapped when we identify that the feature
is detected.
Signed-off-by: Mark Brown <[email protected]>
---
Documentation/arch/arm64/booting.rst | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/Documentation/arch/arm64/booting.rst b/Documentation/arch/arm64/booting.rst
index b57776a68f15..de3679770c64 100644
--- a/Documentation/arch/arm64/booting.rst
+++ b/Documentation/arch/arm64/booting.rst
@@ -411,6 +411,28 @@ Before jumping into the kernel, the following conditions must be met:
- HFGRWR_EL2.nPIRE0_EL1 (bit 57) must be initialised to 0b1.
+ - For features with Guarded Control Stacks (FEAT_GCS):
+
+ - If EL3 is present:
+
+ - SCR_EL3.GCSEn (bit 39) must be initialised to 0b1.
+
+ - If the kernel is entered at EL1 and EL2 is present:
+
+ - HFGITR_EL2.nGCSEPP (bit 59) must be initialised to 0b1.
+
+ - HFGITR_EL2.nGCSSTR_EL1 (bit 58) must be initialised to 0b1.
+
+ - HFGITR_EL2.nGCSPUSHM_EL1 (bit 57) must be initialised to 0b1.
+
+ - HFGRTR_EL2.nGCS_EL1 (bit 53) must be initialised to 0b1.
+
+ - HFGRTR_EL2.nGCS_EL0 (bit 52) must be initialised to 0b1.
+
+ - HFGWTR_EL2.nGCS_EL1 (bit 53) must be initialised to 0b1.
+
+ - HFGWTR_EL2.nGCS_EL0 (bit 52) must be initialised to 0b1.
+
The requirements described above for CPU mode, caches, MMUs, architected
timers, coherency and system registers apply to all CPUs. All CPUs must
enter the kernel in the same exception level. Where the values documented
--
2.39.2
When a new thread is created by a thread with GCS enabled the GCS needs
to be specified along with the regular stack. clone3() has been
extended to support this case, allowing userspace to explicitly request
the size for the GCS to be created, but plain clone() is not extensible
and existing clone3() users will not specify a size.
For compatibility with these cases and also x86 (which did not initially
implement clone3() support for shadow stacks) if no GCS is specified we
will allocate one thread so when a thread is created which has GCS
enabled allocate one for it. We follow the extensively discussed x86
implementation and allocate min(RLIMIT_STACK, 4G). Since the GCS only
stores the call stack and not any variables this should be more than
sufficient for most applications.
GCSs allocated via this mechanism then it will be freed when the thread
exits.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/include/asm/gcs.h | 9 ++++++
arch/arm64/kernel/process.c | 25 +++++++++++++++
arch/arm64/mm/gcs.c | 76 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 110 insertions(+)
diff --git a/arch/arm64/include/asm/gcs.h b/arch/arm64/include/asm/gcs.h
index 04594ef59dad..c1f274fdb9c0 100644
--- a/arch/arm64/include/asm/gcs.h
+++ b/arch/arm64/include/asm/gcs.h
@@ -8,6 +8,8 @@
#include <asm/types.h>
#include <asm/uaccess.h>
+struct kernel_clone_args;
+
static inline void gcsb_dsync(void)
{
asm volatile(".inst 0xd503227f" : : : "memory");
@@ -58,6 +60,8 @@ static inline bool task_gcs_el0_enabled(struct task_struct *task)
void gcs_set_el0_mode(struct task_struct *task);
void gcs_free(struct task_struct *task);
void gcs_preserve_current_state(void);
+unsigned long gcs_alloc_thread_stack(struct task_struct *tsk,
+ const struct kernel_clone_args *args);
#else
@@ -69,6 +73,11 @@ static inline bool task_gcs_el0_enabled(struct task_struct *task)
static inline void gcs_set_el0_mode(struct task_struct *task) { }
static inline void gcs_free(struct task_struct *task) { }
static inline void gcs_preserve_current_state(void) { }
+static inline unsigned long gcs_alloc_thread_stack(struct task_struct *tsk,
+ const struct kernel_clone_args *args)
+{
+ return -ENOTSUPP;
+}
#endif
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index fd80b43c2969..588d2bc4b329 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -285,9 +285,29 @@ static void flush_gcs(void)
write_sysreg_s(0, SYS_GCSPR_EL0);
}
+static int copy_thread_gcs(struct task_struct *p,
+ const struct kernel_clone_args *args)
+{
+ unsigned long gcs;
+
+ gcs = gcs_alloc_thread_stack(p, args);
+ if (IS_ERR_VALUE(gcs))
+ return PTR_ERR((void *)gcs);
+
+ /* Ensure the current state of the GCS is seen by CoW */
+ gcsb_dsync();
+
+ return 0;
+}
+
#else
static void flush_gcs(void) { }
+static int copy_thread_gcs(struct task_struct *p,
+ const struct kernel_clone_args *args)
+{
+ return 0;
+}
#endif
@@ -369,6 +389,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
unsigned long stack_start = args->stack;
unsigned long tls = args->tls;
struct pt_regs *childregs = task_pt_regs(p);
+ int ret;
memset(&p->thread.cpu_context, 0, sizeof(struct cpu_context));
@@ -410,6 +431,10 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
p->thread.uw.tp_value = tls;
p->thread.tpidr2_el0 = 0;
}
+
+ ret = copy_thread_gcs(p, args);
+ if (ret != 0)
+ return ret;
} else {
/*
* A kthread has no context to ERET to, so ensure any buggy
diff --git a/arch/arm64/mm/gcs.c b/arch/arm64/mm/gcs.c
index b0a67efc522b..0d4881173b5f 100644
--- a/arch/arm64/mm/gcs.c
+++ b/arch/arm64/mm/gcs.c
@@ -8,6 +8,82 @@
#include <asm/cpufeature.h>
#include <asm/page.h>
+static unsigned long alloc_gcs(unsigned long addr, unsigned long size,
+ unsigned long token_offset, bool set_res_tok)
+{
+ int flags = MAP_ANONYMOUS | MAP_PRIVATE;
+ struct mm_struct *mm = current->mm;
+ unsigned long mapped_addr, unused;
+
+ if (addr)
+ flags |= MAP_FIXED_NOREPLACE;
+
+ mmap_write_lock(mm);
+ mapped_addr = do_mmap(NULL, addr, size, PROT_READ | PROT_WRITE, flags,
+ VM_SHADOW_STACK, 0, &unused, NULL);
+ mmap_write_unlock(mm);
+
+ return mapped_addr;
+}
+
+static unsigned long gcs_size(unsigned long size)
+{
+ if (size)
+ return PAGE_ALIGN(size);
+
+ /* Allocate RLIMIT_STACK/2 with limits of PAGE_SIZE..2G */
+ size = PAGE_ALIGN(min_t(unsigned long long,
+ rlimit(RLIMIT_STACK) / 2, SZ_2G));
+ return max(PAGE_SIZE, size);
+}
+
+unsigned long gcs_alloc_thread_stack(struct task_struct *tsk,
+ const struct kernel_clone_args *args)
+{
+ unsigned long addr, size;
+
+ /* If the user specified a GCS use it. */
+ if (args->shadow_stack_size) {
+ if (!system_supports_gcs())
+ return (unsigned long)ERR_PTR(-EINVAL);
+
+ size = args->shadow_stack_size;
+
+ if (size < 8)
+ return (unsigned long)ERR_PTR(-EINVAL);
+
+ } else {
+ /*
+ * Otherwise fall back to legacy clone() support and
+ * implicitly allocate a GCS if we need a new one.
+ */
+
+ if (!system_supports_gcs())
+ return 0;
+
+ if (!task_gcs_el0_enabled(tsk))
+ return 0;
+
+ if ((args->flags & (CLONE_VFORK | CLONE_VM)) != CLONE_VM) {
+ tsk->thread.gcspr_el0 = read_sysreg_s(SYS_GCSPR_EL0);
+ return 0;
+ }
+
+ size = args->stack_size;
+ }
+
+ size = gcs_size(size);
+ addr = alloc_gcs(0, size, 0, 0);
+ if (IS_ERR_VALUE(addr))
+ return addr;
+
+ tsk->thread.gcs_base = addr;
+ tsk->thread.gcs_size = size;
+ tsk->thread.gcspr_el0 = addr + size - sizeof(u64);
+
+ return addr;
+}
+
/*
* Apply the GCS mode configured for the specified task to the
* hardware.
--
2.39.2
Map pages flagged as being part of a GCS as such rather than using the
full set of generic VM flags.
This is done using a conditional rather than extending the size of
protection_map since that would make for a very sparse array.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/include/asm/mman.h | 9 +++++++++
arch/arm64/mm/mmap.c | 13 ++++++++++++-
2 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/include/asm/mman.h b/arch/arm64/include/asm/mman.h
index c21849ffdd88..6d3fe6433a62 100644
--- a/arch/arm64/include/asm/mman.h
+++ b/arch/arm64/include/asm/mman.h
@@ -61,6 +61,15 @@ static inline bool arch_validate_flags(unsigned long vm_flags)
return false;
}
+ if (system_supports_gcs() && (vm_flags & VM_SHADOW_STACK)) {
+ /*
+ * An executable GCS isn't a good idea, and the mm
+ * core can't cope with a shared GCS.
+ */
+ if (vm_flags & (VM_EXEC | VM_ARM64_BTI | VM_SHARED))
+ return false;
+ }
+
return true;
}
diff --git a/arch/arm64/mm/mmap.c b/arch/arm64/mm/mmap.c
index 645fe60d000f..605d4e6edc1d 100644
--- a/arch/arm64/mm/mmap.c
+++ b/arch/arm64/mm/mmap.c
@@ -79,9 +79,20 @@ arch_initcall(adjust_protection_map);
pgprot_t vm_get_page_prot(unsigned long vm_flags)
{
- pteval_t prot = pgprot_val(protection_map[vm_flags &
+ pteval_t prot;
+
+ /* If this is a GCS then only interpret VM_WRITE. */
+ if (system_supports_gcs() && (vm_flags & VM_SHADOW_STACK)) {
+ if (vm_flags & VM_WRITE)
+ prot = _PAGE_GCS;
+ else
+ prot = _PAGE_GCS_RO;
+ } else {
+ prot = pgprot_val(protection_map[vm_flags &
(VM_READ|VM_WRITE|VM_EXEC|VM_SHARED)]);
+ }
+ /* VM_ARM64_BTI on a GCS is rejected in arch_valdiate_flags() */
if (vm_flags & VM_ARM64_BTI)
prot |= PTE_GP;
--
2.39.2
Add a cpufeature for GCS, allowing other code to conditionally support it
at runtime.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/include/asm/cpufeature.h | 6 ++++++
arch/arm64/kernel/cpufeature.c | 16 ++++++++++++++++
arch/arm64/tools/cpucaps | 1 +
3 files changed, 23 insertions(+)
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index f6d416fe49b0..5696a55cc1f8 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -819,6 +819,12 @@ static inline bool system_supports_tlb_range(void)
return alternative_has_cap_unlikely(ARM64_HAS_TLB_RANGE);
}
+static inline bool system_supports_gcs(void)
+{
+ return IS_ENABLED(CONFIG_ARM64_GCS) &&
+ alternative_has_cap_unlikely(ARM64_HAS_GCS);
+}
+
int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt);
bool try_emulate_mrs(struct pt_regs *regs, u32 isn);
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 646591c67e7a..5477451cefa1 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -255,6 +255,8 @@ static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
};
static const struct arm64_ftr_bits ftr_id_aa64pfr1[] = {
+ ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_GCS),
+ FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_GCS_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_SME_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_MPAM_frac_SHIFT, 4, 0),
@@ -2242,6 +2244,12 @@ static void cpu_enable_mops(const struct arm64_cpu_capabilities *__unused)
sysreg_clear_set(sctlr_el1, 0, SCTLR_EL1_MSCEn);
}
+static void cpu_enable_gcs(const struct arm64_cpu_capabilities *__unused)
+{
+ /* GCS is not currently used at EL1 */
+ write_sysreg_s(0, SYS_GCSCR_EL1);
+}
+
/* Internal helper functions to match cpu capability type */
static bool
cpucap_late_cpu_optional(const struct arm64_cpu_capabilities *cap)
@@ -2731,6 +2739,14 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
.matches = has_cpuid_feature,
ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, EVT, IMP)
},
+ {
+ .desc = "Guarded Control Stack (GCS)",
+ .capability = ARM64_HAS_GCS,
+ .type = ARM64_CPUCAP_SYSTEM_FEATURE,
+ .cpu_enable = cpu_enable_gcs,
+ .matches = has_cpuid_feature,
+ ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, GCS, IMP)
+ },
{},
};
diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
index b98c38288a9d..30d27f6301fd 100644
--- a/arch/arm64/tools/cpucaps
+++ b/arch/arm64/tools/cpucaps
@@ -28,6 +28,7 @@ HAS_EPAN
HAS_EVT
HAS_FGT
HAS_FPSIMD
+HAS_GCS
HAS_GENERIC_AUTH
HAS_GENERIC_AUTH_ARCH_QARMA3
HAS_GENERIC_AUTH_ARCH_QARMA5
--
2.39.2
There is a control HCRX_EL2.GCSEn which must be set to allow GCS
features to take effect at lower ELs and also fine grained traps for GCS
usage at EL0 and EL1. Configure all these to allow GCS usage by EL0 and
EL1.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/include/asm/el2_setup.h | 17 +++++++++++++++++
arch/arm64/include/asm/kvm_arm.h | 4 ++--
2 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h
index b7afaa026842..17672563e333 100644
--- a/arch/arm64/include/asm/el2_setup.h
+++ b/arch/arm64/include/asm/el2_setup.h
@@ -27,6 +27,14 @@
ubfx x0, x0, #ID_AA64MMFR1_EL1_HCX_SHIFT, #4
cbz x0, .Lskip_hcrx_\@
mov_q x0, HCRX_HOST_FLAGS
+
+ /* Enable GCS if supported */
+ mrs_s x1, SYS_ID_AA64PFR1_EL1
+ ubfx x1, x1, #ID_AA64PFR1_EL1_GCS_SHIFT, #4
+ cbz x1, .Lset_hcrx_\@
+ orr x0, x0, #HCRX_EL2_GCSEn
+
+.Lset_hcrx_\@:
msr_s SYS_HCRX_EL2, x0
.Lskip_hcrx_\@:
.endm
@@ -190,6 +198,15 @@
orr x0, x0, #HFGxTR_EL2_nPIR_EL1
orr x0, x0, #HFGxTR_EL2_nPIRE0_EL1
+ /* GCS depends on PIE so we don't check it if PIE is absent */
+ mrs_s x1, SYS_ID_AA64PFR1_EL1
+ ubfx x1, x1, #ID_AA64PFR1_EL1_GCS_SHIFT, #4
+ cbz x1, .Lset_fgt_\@
+
+ /* Disable traps of access to GCS registers at EL0 and EL1 */
+ orr x0, x0, #HFGxTR_EL2_nGCS_EL1_MASK
+ orr x0, x0, #HFGxTR_EL2_nGCS_EL0_MASK
+
.Lset_fgt_\@:
msr_s SYS_HFGRTR_EL2, x0
msr_s SYS_HFGWTR_EL2, x0
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index b85f46a73e21..e4b6a29879b7 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -103,9 +103,9 @@
#define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H)
#define HCRX_GUEST_FLAGS \
- (HCRX_EL2_SMPME | HCRX_EL2_TCR2En | \
+ (HCRX_EL2_SMPME | HCRX_EL2_TCR2En | HCRX_EL2_GCSEn |\
(cpus_have_final_cap(ARM64_HAS_MOPS) ? (HCRX_EL2_MSCEn | HCRX_EL2_MCE2) : 0))
-#define HCRX_HOST_FLAGS (HCRX_EL2_MSCEn | HCRX_EL2_TCR2En)
+#define HCRX_HOST_FLAGS (HCRX_EL2_MSCEn | HCRX_EL2_TCR2En | HCRX_EL2_GCSEn)
/* TCR_EL2 Registers bits */
#define TCR_EL2_RES1 ((1U << 31) | (1 << 23))
--
2.39.2
Provide a hwcap to enable userspace to detect support for GCS.
Signed-off-by: Mark Brown <[email protected]>
---
Documentation/arch/arm64/elf_hwcaps.rst | 3 +++
arch/arm64/include/asm/hwcap.h | 1 +
arch/arm64/include/uapi/asm/hwcap.h | 1 +
arch/arm64/kernel/cpufeature.c | 3 +++
arch/arm64/kernel/cpuinfo.c | 1 +
5 files changed, 9 insertions(+)
diff --git a/Documentation/arch/arm64/elf_hwcaps.rst b/Documentation/arch/arm64/elf_hwcaps.rst
index ced7b335e2e0..86d4ace9c75c 100644
--- a/Documentation/arch/arm64/elf_hwcaps.rst
+++ b/Documentation/arch/arm64/elf_hwcaps.rst
@@ -317,6 +317,9 @@ HWCAP2_LRCPC3
HWCAP2_LSE128
Functionality implied by ID_AA64ISAR0_EL1.Atomic == 0b0011.
+HWCAP2_GCS
+ Functionality implied by ID_AA64PFR1_EL1.GCS == 0b1
+
4. Unused AT_HWCAP bits
-----------------------
diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h
index cd71e09ea14d..e01e6b72a839 100644
--- a/arch/arm64/include/asm/hwcap.h
+++ b/arch/arm64/include/asm/hwcap.h
@@ -142,6 +142,7 @@
#define KERNEL_HWCAP_SVE_B16B16 __khwcap2_feature(SVE_B16B16)
#define KERNEL_HWCAP_LRCPC3 __khwcap2_feature(LRCPC3)
#define KERNEL_HWCAP_LSE128 __khwcap2_feature(LSE128)
+#define KERNEL_HWCAP_GCS __khwcap2_feature(GCS)
/*
* This yields a mask that user programs can use to figure out what
diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h
index 5023599fa278..996b5b5d4c4e 100644
--- a/arch/arm64/include/uapi/asm/hwcap.h
+++ b/arch/arm64/include/uapi/asm/hwcap.h
@@ -107,5 +107,6 @@
#define HWCAP2_SVE_B16B16 (1UL << 45)
#define HWCAP2_LRCPC3 (1UL << 46)
#define HWCAP2_LSE128 (1UL << 47)
+#define HWCAP2_GCS (1UL << 48)
#endif /* _UAPI__ASM_HWCAP_H */
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 5477451cefa1..dab80391543f 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -2859,6 +2859,9 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
HWCAP_CAP(ID_AA64ZFR0_EL1, I8MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEI8MM),
HWCAP_CAP(ID_AA64ZFR0_EL1, F32MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF32MM),
HWCAP_CAP(ID_AA64ZFR0_EL1, F64MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF64MM),
+#endif
+#ifdef CONFIG_ARM64_GCS
+ HWCAP_CAP(ID_AA64PFR1_EL1, GCS, IMP, CAP_HWCAP, KERNEL_HWCAP_GCS),
#endif
HWCAP_CAP(ID_AA64PFR1_EL1, SSBS, SSBS2, CAP_HWCAP, KERNEL_HWCAP_SSBS),
#ifdef CONFIG_ARM64_BTI
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index a257da7b56fe..d557ee301464 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -130,6 +130,7 @@ static const char *const hwcap_str[] = {
[KERNEL_HWCAP_SVE_B16B16] = "sveb16b16",
[KERNEL_HWCAP_LRCPC3] = "lrcpc3",
[KERNEL_HWCAP_LSE128] = "lse128",
+ [KERNEL_HWCAP_GCS] = "gcs",
};
#ifdef CONFIG_COMPAT
--
2.39.2
When invoking a signal handler we use the GCS configuration and stack
for the current thread.
Since we implement signal return by calling the signal handler with a
return address set up pointing to a trampoline in the vDSO we need to
also configure any active GCS for this by pushing a frame for the
trampoline onto the GCS. If we do not do this then signal return will
generate a GCS protection fault.
In order to guard against attempts to bypass GCS protections via signal
return we only allow returning with GCSPR_EL0 pointing to an address
where it was previously preempted by a signal. We do this by pushing a
cap onto the GCS, this takes the form of an architectural GCS cap token
with the top bit set and token type of 0 which we add on signal entry
and validate and pop off on signal return. The combination of the top
bit being set and the token type mean that this can't be interpreted as
a valid token or address.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/include/asm/gcs.h | 1 +
arch/arm64/kernel/signal.c | 129 +++++++++++++++++++++++++++++++++++++++++--
arch/arm64/mm/gcs.c | 1 +
3 files changed, 126 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/include/asm/gcs.h b/arch/arm64/include/asm/gcs.h
index 48c97e63e56a..f50660603ecf 100644
--- a/arch/arm64/include/asm/gcs.h
+++ b/arch/arm64/include/asm/gcs.h
@@ -9,6 +9,7 @@
#include <asm/uaccess.h>
struct kernel_clone_args;
+struct ksignal;
static inline void gcsb_dsync(void)
{
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 0e8beb3349ea..b5dff91274fb 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -25,6 +25,7 @@
#include <asm/elf.h>
#include <asm/exception.h>
#include <asm/cacheflush.h>
+#include <asm/gcs.h>
#include <asm/ucontext.h>
#include <asm/unistd.h>
#include <asm/fpsimd.h>
@@ -34,6 +35,37 @@
#include <asm/traps.h>
#include <asm/vdso.h>
+#ifdef CONFIG_ARM64_GCS
+/* Extra bit set in the address distinguishing a signal cap token. */
+#define GCS_SIGNAL_CAP_FLAG BIT(63)
+
+#define GCS_SIGNAL_CAP(addr) ((((unsigned long)addr) & GCS_CAP_ADDR_MASK) | \
+ GCS_SIGNAL_CAP_FLAG)
+
+static bool gcs_signal_cap_valid(u64 addr, u64 val)
+{
+ /*
+ * The top bit should be set, this is an invalid address for
+ * EL0 and will only be set for caps created by signals.
+ */
+ if (!(val & GCS_SIGNAL_CAP_FLAG))
+ return false;
+
+ /* The rest should be a standard architectural cap token. */
+ val &= ~GCS_SIGNAL_CAP_FLAG;
+
+ /* The cap must have the low bits set to a token value */
+ if (GCS_CAP_TOKEN(val) != 0)
+ return false;
+
+ /* The cap must store the VA the cap was stored at */
+ if (GCS_CAP_ADDR(addr) != GCS_CAP_ADDR(val))
+ return false;
+
+ return true;
+}
+#endif
+
/*
* Do a signal return; undo the signal stack. These are aligned to 128-bit.
*/
@@ -815,6 +847,45 @@ static int restore_sigframe(struct pt_regs *regs,
return err;
}
+#ifdef CONFIG_ARM64_GCS
+static int gcs_restore_signal(void)
+{
+ u64 gcspr_el0, cap;
+ int ret;
+
+ if (!system_supports_gcs())
+ return 0;
+
+ if (!(current->thread.gcs_el0_mode & PR_SHADOW_STACK_ENABLE))
+ return 0;
+
+ gcspr_el0 = read_sysreg_s(SYS_GCSPR_EL0);
+
+ /*
+ * GCSPR_EL0 should be pointing at a capped GCS, read the cap...
+ */
+ gcsb_dsync();
+ ret = copy_from_user(&cap, (__user void*)gcspr_el0, sizeof(cap));
+ if (ret)
+ return -EFAULT;
+
+ /*
+ * ...then check that the cap is the actual GCS before
+ * restoring it.
+ */
+ if (!gcs_signal_cap_valid(gcspr_el0, cap))
+ return -EINVAL;
+
+ current->thread.gcspr_el0 = gcspr_el0 + sizeof(cap);
+ write_sysreg_s(current->thread.gcspr_el0, SYS_GCSPR_EL0);
+
+ return 0;
+}
+
+#else
+static int gcs_restore_signal(void) { return 0; }
+#endif
+
SYSCALL_DEFINE0(rt_sigreturn)
{
struct pt_regs *regs = current_pt_regs();
@@ -841,6 +912,9 @@ SYSCALL_DEFINE0(rt_sigreturn)
if (restore_altstack(&frame->uc.uc_stack))
goto badframe;
+ if (gcs_restore_signal())
+ goto badframe;
+
return regs->regs[0];
badframe:
@@ -1071,7 +1145,50 @@ static int get_sigframe(struct rt_sigframe_user_layout *user,
return 0;
}
-static void setup_return(struct pt_regs *regs, struct k_sigaction *ka,
+#ifdef CONFIG_ARM64_GCS
+
+static int gcs_signal_entry(__sigrestore_t sigtramp, struct ksignal *ksig)
+{
+ unsigned long __user *gcspr_el0;
+ int ret = 0;
+
+ if (!system_supports_gcs())
+ return 0;
+
+ if (!task_gcs_el0_enabled(current))
+ return 0;
+
+ /*
+ * We are entering a signal handler, current register state is
+ * active.
+ */
+ gcspr_el0 = (unsigned long __user *)read_sysreg_s(SYS_GCSPR_EL0);
+
+ /*
+ * Push a cap and the GCS entry for the trampoline onto the GCS.
+ */
+ put_user_gcs((unsigned long)sigtramp, gcspr_el0 - 2, &ret);
+ put_user_gcs(GCS_SIGNAL_CAP(gcspr_el0 - 1), gcspr_el0 - 1, &ret);
+ if (ret != 0)
+ return ret;
+
+ gcsb_dsync();
+
+ gcspr_el0 -= 2;
+ write_sysreg_s((unsigned long)gcspr_el0, SYS_GCSPR_EL0);
+
+ return 0;
+}
+#else
+
+static int gcs_signal_entry(__sigrestore_t sigtramp, struct ksignal *ksig)
+{
+ return 0;
+}
+
+#endif
+
+static int setup_return(struct pt_regs *regs, struct ksignal *ksig,
struct rt_sigframe_user_layout *user, int usig)
{
__sigrestore_t sigtramp;
@@ -1079,7 +1196,7 @@ static void setup_return(struct pt_regs *regs, struct k_sigaction *ka,
regs->regs[0] = usig;
regs->sp = (unsigned long)user->sigframe;
regs->regs[29] = (unsigned long)&user->next_frame->fp;
- regs->pc = (unsigned long)ka->sa.sa_handler;
+ regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
/*
* Signal delivery is a (wacky) indirect function call in
@@ -1119,12 +1236,14 @@ static void setup_return(struct pt_regs *regs, struct k_sigaction *ka,
sme_smstop();
}
- if (ka->sa.sa_flags & SA_RESTORER)
- sigtramp = ka->sa.sa_restorer;
+ if (ksig->ka.sa.sa_flags & SA_RESTORER)
+ sigtramp = ksig->ka.sa.sa_restorer;
else
sigtramp = VDSO_SYMBOL(current->mm->context.vdso, sigtramp);
regs->regs[30] = (unsigned long)sigtramp;
+
+ return gcs_signal_entry(sigtramp, ksig);
}
static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
@@ -1147,7 +1266,7 @@ static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
err |= setup_sigframe(&user, regs, set);
if (err == 0) {
- setup_return(regs, &ksig->ka, &user, usig);
+ err = setup_return(regs, ksig, &user, usig);
if (ksig->ka.sa.sa_flags & SA_SIGINFO) {
err |= copy_siginfo_to_user(&frame->info, &ksig->info);
regs->regs[1] = (unsigned long)&frame->info;
diff --git a/arch/arm64/mm/gcs.c b/arch/arm64/mm/gcs.c
index 02f8f6046c10..6f51429c5a46 100644
--- a/arch/arm64/mm/gcs.c
+++ b/arch/arm64/mm/gcs.c
@@ -6,6 +6,7 @@
#include <linux/types.h>
#include <asm/cpufeature.h>
+#include <asm/gcs.h>
#include <asm/page.h>
static unsigned long alloc_gcs(unsigned long addr, unsigned long size,
--
2.39.2
A new exception code is defined for GCS specific faults other than
standard load/store faults, for example GCS token validation failures,
add handling for this. These faults are reported to userspace as
segfaults with code SEGV_CPERR (protection error), mirroring the
reporting for x86 shadow stack errors.
GCS faults due to memory load/store operations generate data aborts with
a flag set, these will be handled separately as part of the data abort
handling.
Since we do not currently enable GCS for EL1 we should not get any faults
there but while we're at it we wire things up there, treating any GCS
fault as fatal.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/include/asm/esr.h | 28 +++++++++++++++++++++++++++-
arch/arm64/include/asm/exception.h | 2 ++
arch/arm64/kernel/entry-common.c | 23 +++++++++++++++++++++++
arch/arm64/kernel/traps.c | 11 +++++++++++
4 files changed, 63 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h
index ae35939f395b..a87a8305051f 100644
--- a/arch/arm64/include/asm/esr.h
+++ b/arch/arm64/include/asm/esr.h
@@ -51,7 +51,8 @@
#define ESR_ELx_EC_FP_EXC32 (0x28)
/* Unallocated EC: 0x29 - 0x2B */
#define ESR_ELx_EC_FP_EXC64 (0x2C)
-/* Unallocated EC: 0x2D - 0x2E */
+#define ESR_ELx_EC_GCS (0x2D)
+/* Unallocated EC: 0x2E */
#define ESR_ELx_EC_SERROR (0x2F)
#define ESR_ELx_EC_BREAKPT_LOW (0x30)
#define ESR_ELx_EC_BREAKPT_CUR (0x31)
@@ -382,6 +383,31 @@
#define ESR_ELx_MOPS_ISS_SRCREG(esr) (((esr) & (UL(0x1f) << 5)) >> 5)
#define ESR_ELx_MOPS_ISS_SIZEREG(esr) (((esr) & (UL(0x1f) << 0)) >> 0)
+/* ISS field definitions for GCS */
+#define ESR_ELx_ExType_SHIFT (20)
+#define ESR_ELx_ExType_MASK GENMASK(23, 20)
+#define ESR_ELx_Raddr_SHIFT (10)
+#define ESR_ELx_Raddr_MASK GENMASK(14, 10)
+#define ESR_ELx_Rn_SHIFT (5)
+#define ESR_ELx_Rn_MASK GENMASK(9, 5)
+#define ESR_ELx_Rvalue_SHIFT 5
+#define ESR_ELx_Rvalue_MASK GENMASK(9, 5)
+#define ESR_ELx_IT_SHIFT (0)
+#define ESR_ELx_IT_MASK GENMASK(4, 0)
+
+#define ESR_ELx_ExType_DATA_CHECK 0
+#define ESR_ELx_ExType_EXLOCK 1
+#define ESR_ELx_ExType_STR 2
+
+#define ESR_ELx_IT_RET 0
+#define ESR_ELx_IT_GCSPOPM 1
+#define ESR_ELx_IT_RET_KEYA 2
+#define ESR_ELx_IT_RET_KEYB 3
+#define ESR_ELx_IT_GCSSS1 4
+#define ESR_ELx_IT_GCSSS2 5
+#define ESR_ELx_IT_GCSPOPCX 6
+#define ESR_ELx_IT_GCSPOPX 7
+
#ifndef __ASSEMBLY__
#include <asm/types.h>
diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h
index ad688e157c9b..99caff458e20 100644
--- a/arch/arm64/include/asm/exception.h
+++ b/arch/arm64/include/asm/exception.h
@@ -57,6 +57,8 @@ void do_el0_undef(struct pt_regs *regs, unsigned long esr);
void do_el1_undef(struct pt_regs *regs, unsigned long esr);
void do_el0_bti(struct pt_regs *regs);
void do_el1_bti(struct pt_regs *regs, unsigned long esr);
+void do_el0_gcs(struct pt_regs *regs, unsigned long esr);
+void do_el1_gcs(struct pt_regs *regs, unsigned long esr);
void do_debug_exception(unsigned long addr_if_watchpoint, unsigned long esr,
struct pt_regs *regs);
void do_fpsimd_acc(unsigned long esr, struct pt_regs *regs);
diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
index 0fc94207e69a..52d78ce63a4e 100644
--- a/arch/arm64/kernel/entry-common.c
+++ b/arch/arm64/kernel/entry-common.c
@@ -429,6 +429,15 @@ static void noinstr el1_bti(struct pt_regs *regs, unsigned long esr)
exit_to_kernel_mode(regs);
}
+static void noinstr el1_gcs(struct pt_regs *regs, unsigned long esr)
+{
+ enter_from_kernel_mode(regs);
+ local_daif_inherit(regs);
+ do_el1_gcs(regs, esr);
+ local_daif_mask();
+ exit_to_kernel_mode(regs);
+}
+
static void noinstr el1_dbg(struct pt_regs *regs, unsigned long esr)
{
unsigned long far = read_sysreg(far_el1);
@@ -471,6 +480,9 @@ asmlinkage void noinstr el1h_64_sync_handler(struct pt_regs *regs)
case ESR_ELx_EC_BTI:
el1_bti(regs, esr);
break;
+ case ESR_ELx_EC_GCS:
+ el1_gcs(regs, esr);
+ break;
case ESR_ELx_EC_BREAKPT_CUR:
case ESR_ELx_EC_SOFTSTP_CUR:
case ESR_ELx_EC_WATCHPT_CUR:
@@ -650,6 +662,14 @@ static void noinstr el0_mops(struct pt_regs *regs, unsigned long esr)
exit_to_user_mode(regs);
}
+static void noinstr el0_gcs(struct pt_regs *regs, unsigned long esr)
+{
+ enter_from_user_mode(regs);
+ local_daif_restore(DAIF_PROCCTX);
+ do_el0_gcs(regs, esr);
+ exit_to_user_mode(regs);
+}
+
static void noinstr el0_inv(struct pt_regs *regs, unsigned long esr)
{
enter_from_user_mode(regs);
@@ -732,6 +752,9 @@ asmlinkage void noinstr el0t_64_sync_handler(struct pt_regs *regs)
case ESR_ELx_EC_MOPS:
el0_mops(regs, esr);
break;
+ case ESR_ELx_EC_GCS:
+ el0_gcs(regs, esr);
+ break;
case ESR_ELx_EC_BREAKPT_LOW:
case ESR_ELx_EC_SOFTSTP_LOW:
case ESR_ELx_EC_WATCHPT_LOW:
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 215e6d7f2df8..fb867c6526a6 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -500,6 +500,16 @@ void do_el1_bti(struct pt_regs *regs, unsigned long esr)
die("Oops - BTI", regs, esr);
}
+void do_el0_gcs(struct pt_regs *regs, unsigned long esr)
+{
+ force_signal_inject(SIGSEGV, SEGV_CPERR, regs->pc, 0);
+}
+
+void do_el1_gcs(struct pt_regs *regs, unsigned long esr)
+{
+ die("Oops - GCS", regs, esr);
+}
+
void do_el0_fpac(struct pt_regs *regs, unsigned long esr)
{
force_signal_inject(SIGILL, ILL_ILLOPN, regs->pc, esr);
@@ -838,6 +848,7 @@ static const char *esr_class_str[] = {
[ESR_ELx_EC_MOPS] = "MOPS",
[ESR_ELx_EC_FP_EXC32] = "FP (AArch32)",
[ESR_ELx_EC_FP_EXC64] = "FP (AArch64)",
+ [ESR_ELx_EC_GCS] = "Guarded Control Stack",
[ESR_ELx_EC_SERROR] = "SError",
[ESR_ELx_EC_BREAKPT_LOW] = "Breakpoint (lower EL)",
[ESR_ELx_EC_BREAKPT_CUR] = "Breakpoint (current EL)",
--
2.39.2
Provide a Kconfig option allowing the user to select if GCS support is
built into the kernel.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/Kconfig | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 7b071a00425d..05cffc0f5786 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -2078,6 +2078,26 @@ config ARM64_EPAN
if the cpu does not implement the feature.
endmenu # "ARMv8.7 architectural features"
+menu "v9.4 architectural features"
+
+config ARM64_GCS
+ bool "Enable support for Guarded Control Stack (GCS)"
+ default y
+ select ARCH_HAS_USER_SHADOW_STACK
+ select ARCH_USES_HIGH_VMA_FLAGS
+ help
+ Guarded Control Stack (GCS) provides support for a separate
+ stack with restricted access which contains only return
+ addresses. This can be used to harden against some attacks
+ by comparing return address used by the program with what is
+ stored in the GCS, and may also be used to efficiently obtain
+ the call stack for applications such as profiling.
+
+ The feature is detected at runtime, and will remain disabled
+ if the system does not implement the feature.
+
+endmenu # "v9.4 architectural features"
+
config ARM64_SVE
bool "ARM Scalable Vector Extension support"
default y
--
2.39.2
Provide a new register type NT_ARM_GCS reporting the current GCS mode
and pointer for EL0. Due to the interactions with allocation and
deallocation of Guarded Control Stacks we do not permit any changes to
the GCS mode via ptrace, only GCSPR_EL0 may be changed.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/include/uapi/asm/ptrace.h | 8 +++++
arch/arm64/kernel/ptrace.c | 59 ++++++++++++++++++++++++++++++++++++
include/uapi/linux/elf.h | 1 +
3 files changed, 68 insertions(+)
diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h
index 7fa2f7036aa7..0f39ba4f3efd 100644
--- a/arch/arm64/include/uapi/asm/ptrace.h
+++ b/arch/arm64/include/uapi/asm/ptrace.h
@@ -324,6 +324,14 @@ struct user_za_header {
#define ZA_PT_SIZE(vq) \
(ZA_PT_ZA_OFFSET + ZA_PT_ZA_SIZE(vq))
+/* GCS state (NT_ARM_GCS) */
+
+struct user_gcs {
+ __u64 features_enabled;
+ __u64 features_locked;
+ __u64 gcspr_el0;
+};
+
#endif /* __ASSEMBLY__ */
#endif /* _UAPI__ASM_PTRACE_H */
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 20d7ef82de90..f15b8e33561e 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -33,6 +33,7 @@
#include <asm/cpufeature.h>
#include <asm/debug-monitors.h>
#include <asm/fpsimd.h>
+#include <asm/gcs.h>
#include <asm/mte.h>
#include <asm/pointer_auth.h>
#include <asm/stacktrace.h>
@@ -1409,6 +1410,51 @@ static int tagged_addr_ctrl_set(struct task_struct *target, const struct
}
#endif
+#ifdef CONFIG_ARM64_GCS
+static int gcs_get(struct task_struct *target,
+ const struct user_regset *regset,
+ struct membuf to)
+{
+ struct user_gcs user_gcs;
+
+ if (target == current)
+ gcs_preserve_current_state();
+
+ user_gcs.features_enabled = target->thread.gcs_el0_mode;
+ user_gcs.features_locked = target->thread.gcs_el0_locked;
+ user_gcs.gcspr_el0 = target->thread.gcspr_el0;
+
+ return membuf_write(&to, &user_gcs, sizeof(user_gcs));
+}
+
+static int gcs_set(struct task_struct *target, const struct
+ user_regset *regset, unsigned int pos,
+ unsigned int count, const void *kbuf, const
+ void __user *ubuf)
+{
+ int ret;
+ struct user_gcs user_gcs;
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &user_gcs, 0, -1);
+ if (ret)
+ return ret;
+
+ if (user_gcs.features_enabled & ~PR_SHADOW_STACK_SUPPORTED_STATUS_MASK)
+ return -EINVAL;
+
+ /* Do not allow enable via ptrace */
+ if ((user_gcs.features_enabled & PR_SHADOW_STACK_ENABLE) &&
+ !!(target->thread.gcs_el0_mode & PR_SHADOW_STACK_ENABLE))
+ return -EBUSY;
+
+ target->thread.gcs_el0_mode = user_gcs.features_enabled;
+ target->thread.gcs_el0_locked = user_gcs.features_locked;
+ target->thread.gcspr_el0 = user_gcs.gcspr_el0;
+
+ return 0;
+}
+#endif
+
enum aarch64_regset {
REGSET_GPR,
REGSET_FPR,
@@ -1437,6 +1483,9 @@ enum aarch64_regset {
#ifdef CONFIG_ARM64_TAGGED_ADDR_ABI
REGSET_TAGGED_ADDR_CTRL,
#endif
+#ifdef CONFIG_ARM64_GCS
+ REGSET_GCS,
+#endif
};
static const struct user_regset aarch64_regsets[] = {
@@ -1587,6 +1636,16 @@ static const struct user_regset aarch64_regsets[] = {
.set = tagged_addr_ctrl_set,
},
#endif
+#ifdef CONFIG_ARM64_GCS
+ [REGSET_GCS] = {
+ .core_note_type = NT_ARM_GCS,
+ .n = sizeof(struct user_gcs) / sizeof(u64),
+ .size = sizeof(u64),
+ .align = sizeof(u64),
+ .regset_get = gcs_get,
+ .set = gcs_set,
+ },
+#endif
};
static const struct user_regset_view user_aarch64_view = {
diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h
index 9417309b7230..436dfc359f61 100644
--- a/include/uapi/linux/elf.h
+++ b/include/uapi/linux/elf.h
@@ -440,6 +440,7 @@ typedef struct elf64_shdr {
#define NT_ARM_SSVE 0x40b /* ARM Streaming SVE registers */
#define NT_ARM_ZA 0x40c /* ARM SME ZA registers */
#define NT_ARM_ZT 0x40d /* ARM SME ZT registers */
+#define NT_ARM_GCS 0x40e /* ARM GCS state */
#define NT_ARC_V2 0x600 /* ARCv2 accumulator/extra registers */
#define NT_VMCOREDD 0x700 /* Vmcore Device Dump Note */
#define NT_MIPS_DSP 0x800 /* MIPS DSP ASE registers */
--
2.39.2
Add coverage of the GCS hwcap to the hwcap selftest, using a read of
GCSPR_EL0 to generate SIGILL without having to worry about enabling GCS.
Signed-off-by: Mark Brown <[email protected]>
---
tools/testing/selftests/arm64/abi/hwcap.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/tools/testing/selftests/arm64/abi/hwcap.c b/tools/testing/selftests/arm64/abi/hwcap.c
index 1189e77c8152..bc9e3250a9df 100644
--- a/tools/testing/selftests/arm64/abi/hwcap.c
+++ b/tools/testing/selftests/arm64/abi/hwcap.c
@@ -63,6 +63,17 @@ static void fp_sigill(void)
asm volatile("fmov s0, #1");
}
+static void gcs_sigill(void)
+{
+ unsigned long *gcspr;
+
+ asm volatile(
+ "mrs %0, S3_3_C2_C5_1"
+ : "=r" (gcspr)
+ :
+ : "cc");
+}
+
static void ilrcpc_sigill(void)
{
/* LDAPUR W0, [SP, #8] */
@@ -360,6 +371,14 @@ static const struct hwcap_data {
.cpuinfo = "fp",
.sigill_fn = fp_sigill,
},
+ {
+ .name = "GCS",
+ .at_hwcap = AT_HWCAP2,
+ .hwcap_bit = HWCAP2_GCS,
+ .cpuinfo = "gcs",
+ .sigill_fn = gcs_sigill,
+ .sigill_reliable = true,
+ },
{
.name = "JSCVT",
.at_hwcap = AT_HWCAP,
--
2.39.2
There are two registers controlling the GCS state of EL0, GCSPR_EL0 which
is the current GCS pointer and GCSCRE0_EL1 which has enable bits for the
specific GCS functionality enabled for EL0. Manage these on context switch
and process lifetime events, GCS is reset on exec(). Also ensure that
any changes to the GCS memory are visible to other PEs and that changes
from other PEs are visible on this one by issuing a GCSB DSYNC when
moving to or from a thread with GCS.
Since the current GCS configuration of a thread will be visible to
userspace we store the configuration in the format used with userspace
and provide a helper which configures the system register as needed.
On systems that support GCS we always allow access to GCSPR_EL0, this
facilitates reporting of GCS faults if userspace implements disabling of
GCS on error - the GCS can still be discovered and examined even if GCS
has been disabled.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/include/asm/gcs.h | 24 ++++++++++++++++
arch/arm64/include/asm/processor.h | 6 ++++
arch/arm64/kernel/process.c | 56 ++++++++++++++++++++++++++++++++++++++
arch/arm64/mm/Makefile | 1 +
arch/arm64/mm/gcs.c | 39 ++++++++++++++++++++++++++
5 files changed, 126 insertions(+)
diff --git a/arch/arm64/include/asm/gcs.h b/arch/arm64/include/asm/gcs.h
index 7c5e95218db6..04594ef59dad 100644
--- a/arch/arm64/include/asm/gcs.h
+++ b/arch/arm64/include/asm/gcs.h
@@ -48,4 +48,28 @@ static inline u64 gcsss2(void)
return Xt;
}
+#ifdef CONFIG_ARM64_GCS
+
+static inline bool task_gcs_el0_enabled(struct task_struct *task)
+{
+ return current->thread.gcs_el0_mode & PR_SHADOW_STACK_ENABLE;
+}
+
+void gcs_set_el0_mode(struct task_struct *task);
+void gcs_free(struct task_struct *task);
+void gcs_preserve_current_state(void);
+
+#else
+
+static inline bool task_gcs_el0_enabled(struct task_struct *task)
+{
+ return false;
+}
+
+static inline void gcs_set_el0_mode(struct task_struct *task) { }
+static inline void gcs_free(struct task_struct *task) { }
+static inline void gcs_preserve_current_state(void) { }
+
+#endif
+
#endif
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index e5bc54522e71..c28681cf9721 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -179,6 +179,12 @@ struct thread_struct {
u64 sctlr_user;
u64 svcr;
u64 tpidr2_el0;
+#ifdef CONFIG_ARM64_GCS
+ unsigned int gcs_el0_mode;
+ u64 gcspr_el0;
+ u64 gcs_base;
+ u64 gcs_size;
+#endif
};
static inline unsigned int thread_get_vl(struct thread_struct *thread,
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 7387b68c745b..fd80b43c2969 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -48,6 +48,7 @@
#include <asm/cacheflush.h>
#include <asm/exec.h>
#include <asm/fpsimd.h>
+#include <asm/gcs.h>
#include <asm/mmu_context.h>
#include <asm/mte.h>
#include <asm/processor.h>
@@ -271,12 +272,32 @@ static void flush_tagged_addr_state(void)
clear_thread_flag(TIF_TAGGED_ADDR);
}
+#ifdef CONFIG_ARM64_GCS
+
+static void flush_gcs(void)
+{
+ if (!system_supports_gcs())
+ return;
+
+ gcs_free(current);
+ current->thread.gcs_el0_mode = 0;
+ write_sysreg_s(0, SYS_GCSCRE0_EL1);
+ write_sysreg_s(0, SYS_GCSPR_EL0);
+}
+
+#else
+
+static void flush_gcs(void) { }
+
+#endif
+
void flush_thread(void)
{
fpsimd_flush_thread();
tls_thread_flush();
flush_ptrace_hw_breakpoint(current);
flush_tagged_addr_state();
+ flush_gcs();
}
void arch_release_task_struct(struct task_struct *tsk)
@@ -474,6 +495,40 @@ static void entry_task_switch(struct task_struct *next)
__this_cpu_write(__entry_task, next);
}
+#ifdef CONFIG_ARM64_GCS
+
+void gcs_preserve_current_state(void)
+{
+ if (task_gcs_el0_enabled(current))
+ current->thread.gcspr_el0 = read_sysreg_s(SYS_GCSPR_EL0);
+}
+
+static void gcs_thread_switch(struct task_struct *next)
+{
+ if (!system_supports_gcs())
+ return;
+
+ gcs_preserve_current_state();
+
+ gcs_set_el0_mode(next);
+ write_sysreg_s(next->thread.gcspr_el0, SYS_GCSPR_EL0);
+
+ /*
+ * Ensure that GCS changes are observable by/from other PEs in
+ * case of migration.
+ */
+ if (task_gcs_el0_enabled(current) || task_gcs_el0_enabled(next))
+ gcsb_dsync();
+}
+
+#else
+
+static void gcs_thread_switch(struct task_struct *next)
+{
+}
+
+#endif
+
/*
* ARM erratum 1418040 handling, affecting the 32bit view of CNTVCT.
* Ensure access is disabled when switching to a 32bit task, ensure
@@ -533,6 +588,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
ssbs_thread_switch(next);
erratum_1418040_thread_switch(next);
ptrauth_thread_switch_user(next);
+ gcs_thread_switch(next);
/*
* Complete any pending TLB or cache maintenance on this CPU in case
diff --git a/arch/arm64/mm/Makefile b/arch/arm64/mm/Makefile
index dbd1bc95967d..4e7cb2f02999 100644
--- a/arch/arm64/mm/Makefile
+++ b/arch/arm64/mm/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_TRANS_TABLE) += trans_pgd.o
obj-$(CONFIG_TRANS_TABLE) += trans_pgd-asm.o
obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o
obj-$(CONFIG_ARM64_MTE) += mteswap.o
+obj-$(CONFIG_ARM64_GCS) += gcs.o
KASAN_SANITIZE_physaddr.o += n
obj-$(CONFIG_KASAN) += kasan_init.o
diff --git a/arch/arm64/mm/gcs.c b/arch/arm64/mm/gcs.c
new file mode 100644
index 000000000000..b0a67efc522b
--- /dev/null
+++ b/arch/arm64/mm/gcs.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/syscalls.h>
+#include <linux/types.h>
+
+#include <asm/cpufeature.h>
+#include <asm/page.h>
+
+/*
+ * Apply the GCS mode configured for the specified task to the
+ * hardware.
+ */
+void gcs_set_el0_mode(struct task_struct *task)
+{
+ u64 gcscre0_el1 = GCSCRE0_EL1_nTR;
+
+ if (task->thread.gcs_el0_mode & PR_SHADOW_STACK_ENABLE)
+ gcscre0_el1 |= GCSCRE0_EL1_RVCHKEN | GCSCRE0_EL1_PCRSEL;
+
+ if (task->thread.gcs_el0_mode & PR_SHADOW_STACK_WRITE)
+ gcscre0_el1 |= GCSCRE0_EL1_STREn;
+
+ if (task->thread.gcs_el0_mode & PR_SHADOW_STACK_PUSH)
+ gcscre0_el1 |= GCSCRE0_EL1_PUSHMEn;
+
+ write_sysreg_s(gcscre0_el1, SYS_GCSCRE0_EL1);
+}
+
+void gcs_free(struct task_struct *task)
+{
+ if (task->thread.gcs_base)
+ vm_munmap(task->thread.gcs_base, task->thread.gcs_size);
+
+ task->thread.gcspr_el0 = 0;
+ task->thread.gcs_base = 0;
+ task->thread.gcs_size = 0;
+}
--
2.39.2
In preparation for testing GCS related signal handling add it as a feature
we check for in the signal handling support code.
Signed-off-by: Mark Brown <[email protected]>
---
tools/testing/selftests/arm64/signal/test_signals.h | 2 ++
tools/testing/selftests/arm64/signal/test_signals_utils.c | 3 +++
2 files changed, 5 insertions(+)
diff --git a/tools/testing/selftests/arm64/signal/test_signals.h b/tools/testing/selftests/arm64/signal/test_signals.h
index 1e6273d81575..7ada43688c02 100644
--- a/tools/testing/selftests/arm64/signal/test_signals.h
+++ b/tools/testing/selftests/arm64/signal/test_signals.h
@@ -35,6 +35,7 @@ enum {
FSME_BIT,
FSME_FA64_BIT,
FSME2_BIT,
+ FGCS_BIT,
FMAX_END
};
@@ -43,6 +44,7 @@ enum {
#define FEAT_SME (1UL << FSME_BIT)
#define FEAT_SME_FA64 (1UL << FSME_FA64_BIT)
#define FEAT_SME2 (1UL << FSME2_BIT)
+#define FEAT_GCS (1UL << FGCS_BIT)
/*
* A descriptor used to describe and configure a test case.
diff --git a/tools/testing/selftests/arm64/signal/test_signals_utils.c b/tools/testing/selftests/arm64/signal/test_signals_utils.c
index 0dc948db3a4a..89ef95c1af0e 100644
--- a/tools/testing/selftests/arm64/signal/test_signals_utils.c
+++ b/tools/testing/selftests/arm64/signal/test_signals_utils.c
@@ -30,6 +30,7 @@ static char const *const feats_names[FMAX_END] = {
" SME ",
" FA64 ",
" SME2 ",
+ " GCS ",
};
#define MAX_FEATS_SZ 128
@@ -329,6 +330,8 @@ int test_init(struct tdescr *td)
td->feats_supported |= FEAT_SME_FA64;
if (getauxval(AT_HWCAP2) & HWCAP2_SME2)
td->feats_supported |= FEAT_SME2;
+ if (getauxval(AT_HWCAP2) & HWCAP2_GCS)
+ td->feats_supported |= FEAT_GCS;
if (feats_ok(td)) {
if (td->feats_required & td->feats_supported)
fprintf(stderr,
--
2.39.2
Teach the framework about the GCS signal context, avoiding warnings on
the unknown context.
Signed-off-by: Mark Brown <[email protected]>
---
tools/testing/selftests/arm64/signal/testcases/testcases.c | 7 +++++++
tools/testing/selftests/arm64/signal/testcases/testcases.h | 1 +
2 files changed, 8 insertions(+)
diff --git a/tools/testing/selftests/arm64/signal/testcases/testcases.c b/tools/testing/selftests/arm64/signal/testcases/testcases.c
index 9f580b55b388..1cd124732be4 100644
--- a/tools/testing/selftests/arm64/signal/testcases/testcases.c
+++ b/tools/testing/selftests/arm64/signal/testcases/testcases.c
@@ -209,6 +209,13 @@ bool validate_reserved(ucontext_t *uc, size_t resv_sz, char **err)
zt = (struct zt_context *)head;
new_flags |= ZT_CTX;
break;
+ case GCS_MAGIC:
+ if (flags & GCS_CTX)
+ *err = "Multiple GCS_MAGIC";
+ if (head->size != sizeof(struct gcs_context))
+ *err = "Bad size for gcs_context";
+ new_flags |= GCS_CTX;
+ break;
case EXTRA_MAGIC:
if (flags & EXTRA_CTX)
*err = "Multiple EXTRA_MAGIC";
diff --git a/tools/testing/selftests/arm64/signal/testcases/testcases.h b/tools/testing/selftests/arm64/signal/testcases/testcases.h
index a08ab0d6207a..9b2599745c29 100644
--- a/tools/testing/selftests/arm64/signal/testcases/testcases.h
+++ b/tools/testing/selftests/arm64/signal/testcases/testcases.h
@@ -19,6 +19,7 @@
#define ZA_CTX (1 << 2)
#define EXTRA_CTX (1 << 3)
#define ZT_CTX (1 << 4)
+#define GCS_CTX (1 << 5)
#define KSFT_BAD_MAGIC 0xdeadbeef
--
2.39.2
Implement the architecture neutral prtctl() interface for setting the
shadow stack status, this supports setting and reading the current GCS
configuration for the current thread.
Userspace can enable basic GCS functionality and additionally also
support for GCS pushes and arbatrary GCS stores. It is expected that
this prctl() will be called very early in application startup, for
example by the dynamic linker, and not subsequently adjusted during
normal operation. Users should carefully note that after enabling GCS
for a thread GCS will become active with no call stack so it is not
normally possible to return from the function that invoked the prctl().
State is stored per thread, enabling GCS for a thread causes a GCS to be
allocated for that thread.
Userspace may lock the current GCS configuration by specifying
PR_SHADOW_STACK_ENABLE_LOCK, this prevents any further changes to the
GCS configuration via any means.
If GCS is not being enabled then all flags other than _LOCK are ignored,
it is not possible to enable stores or pops without enabling GCS.
When disabling the GCS we do not free the allocated stack, this allows
for inspection of the GCS after disabling as part of fault reporting.
Since it is not an expected use case and since it presents some
complications in determining what to do with previously initialsed data
on the GCS attempts to reenable GCS after this are rejected. This can
be revisted if a use case arises.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/include/asm/gcs.h | 22 ++++++++++
arch/arm64/include/asm/processor.h | 1 +
arch/arm64/mm/gcs.c | 82 ++++++++++++++++++++++++++++++++++++++
3 files changed, 105 insertions(+)
diff --git a/arch/arm64/include/asm/gcs.h b/arch/arm64/include/asm/gcs.h
index c1f274fdb9c0..48c97e63e56a 100644
--- a/arch/arm64/include/asm/gcs.h
+++ b/arch/arm64/include/asm/gcs.h
@@ -50,6 +50,9 @@ static inline u64 gcsss2(void)
return Xt;
}
+#define PR_SHADOW_STACK_SUPPORTED_STATUS_MASK \
+ (PR_SHADOW_STACK_ENABLE | PR_SHADOW_STACK_WRITE | PR_SHADOW_STACK_PUSH)
+
#ifdef CONFIG_ARM64_GCS
static inline bool task_gcs_el0_enabled(struct task_struct *task)
@@ -63,6 +66,20 @@ void gcs_preserve_current_state(void);
unsigned long gcs_alloc_thread_stack(struct task_struct *tsk,
const struct kernel_clone_args *args);
+static inline int gcs_check_locked(struct task_struct *task,
+ unsigned long new_val)
+{
+ unsigned long cur_val = task->thread.gcs_el0_mode;
+
+ cur_val &= task->thread.gcs_el0_locked;
+ new_val &= task->thread.gcs_el0_locked;
+
+ if (cur_val != new_val)
+ return -EBUSY;
+
+ return 0;
+}
+
#else
static inline bool task_gcs_el0_enabled(struct task_struct *task)
@@ -78,6 +95,11 @@ static inline unsigned long gcs_alloc_thread_stack(struct task_struct *tsk,
{
return -ENOTSUPP;
}
+static inline int gcs_check_locked(struct task_struct *task,
+ unsigned long new_val)
+{
+ return 0;
+}
#endif
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index c28681cf9721..029d20ea7878 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -181,6 +181,7 @@ struct thread_struct {
u64 tpidr2_el0;
#ifdef CONFIG_ARM64_GCS
unsigned int gcs_el0_mode;
+ unsigned int gcs_el0_locked;
u64 gcspr_el0;
u64 gcs_base;
u64 gcs_size;
diff --git a/arch/arm64/mm/gcs.c b/arch/arm64/mm/gcs.c
index 0d4881173b5f..315bd698de86 100644
--- a/arch/arm64/mm/gcs.c
+++ b/arch/arm64/mm/gcs.c
@@ -113,3 +113,85 @@ void gcs_free(struct task_struct *task)
task->thread.gcs_base = 0;
task->thread.gcs_size = 0;
}
+
+int arch_set_shadow_stack_status(struct task_struct *task, unsigned long arg)
+{
+ unsigned long gcs, size;
+ int ret;
+
+ if (!system_supports_gcs())
+ return -EINVAL;
+
+ if (is_compat_thread(task_thread_info(task)))
+ return -EINVAL;
+
+ /* Reject unknown flags */
+ if (arg & ~PR_SHADOW_STACK_SUPPORTED_STATUS_MASK)
+ return -EINVAL;
+
+ ret = gcs_check_locked(task, arg);
+ if (ret != 0)
+ return ret;
+
+ /* If we are enabling GCS then make sure we have a stack */
+ if (arg & PR_SHADOW_STACK_ENABLE) {
+ if (!task_gcs_el0_enabled(task)) {
+ /* Do not allow GCS to be reenabled */
+ if (task->thread.gcs_base)
+ return -EINVAL;
+
+ if (task != current)
+ return -EBUSY;
+
+ size = gcs_size(0);
+ gcs = alloc_gcs(task->thread.gcspr_el0, size,
+ 0, 0);
+ if (!gcs)
+ return -ENOMEM;
+
+ task->thread.gcspr_el0 = gcs + size - sizeof(u64);
+ task->thread.gcs_base = gcs;
+ task->thread.gcs_size = size;
+ if (task == current)
+ write_sysreg_s(task->thread.gcspr_el0,
+ SYS_GCSPR_EL0);
+
+ }
+ }
+
+ task->thread.gcs_el0_mode = arg;
+ if (task == current)
+ gcs_set_el0_mode(task);
+
+ return 0;
+}
+
+int arch_get_shadow_stack_status(struct task_struct *task,
+ unsigned long __user *arg)
+{
+ if (!system_supports_gcs())
+ return -EINVAL;
+
+ if (is_compat_thread(task_thread_info(task)))
+ return -EINVAL;
+
+ return put_user(task->thread.gcs_el0_mode, arg);
+}
+
+int arch_lock_shadow_stack_status(struct task_struct *task,
+ unsigned long arg)
+{
+ if (!system_supports_gcs())
+ return -EINVAL;
+
+ if (is_compat_thread(task_thread_info(task)))
+ return -EINVAL;
+
+ /*
+ * We support locking unknown bits so applications can prevent
+ * any changes in a future proof manner.
+ */
+ task->thread.gcs_el0_locked |= arg;
+
+ return 0;
+}
--
2.39.2
As discussed extensively in the changelog for the addition of this
syscall on x86 ("x86/shstk: Introduce map_shadow_stack syscall") the
existing mmap() and madvise() syscalls do not map entirely well onto the
security requirements for guarded control stacks since they lead to
windows where memory is allocated but not yet protected or stacks which
are not properly and safely initialised. Instead a new syscall
map_shadow_stack() has been defined which allocates and initialises a
shadow stack page.
Implement this for arm64. Two flags are provided, allowing applications
to request that the stack be initialised with a valid cap token at the
top of the stack and optionally also an end of stack marker above that.
We support requesting an end of stack marker alone but since this is a
NULL pointer it is indistinguishable from not initialising anything by
itself.
Since the x86 code has not yet been rebased to v6.5-rc1 this includes
the architecture neutral parts of Rick Edgecmbe's "x86/shstk: Introduce
map_shadow_stack syscall".
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/mm/gcs.c | 61 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/arch/arm64/mm/gcs.c b/arch/arm64/mm/gcs.c
index 315bd698de86..02f8f6046c10 100644
--- a/arch/arm64/mm/gcs.c
+++ b/arch/arm64/mm/gcs.c
@@ -84,6 +84,67 @@ unsigned long gcs_alloc_thread_stack(struct task_struct *tsk,
return addr;
}
+SYSCALL_DEFINE3(map_shadow_stack, unsigned long, addr, unsigned long, size, unsigned int, flags)
+{
+ unsigned long alloc_size;
+ unsigned long __user *cap_ptr;
+ unsigned long cap_val;
+ int ret = 0;
+ int cap_offset;
+
+ if (!system_supports_gcs())
+ return -EOPNOTSUPP;
+
+ if (flags & ~(SHADOW_STACK_SET_TOKEN | SHADOW_STACK_SET_MARKER))
+ return -EINVAL;
+
+ if (addr && (addr % PAGE_SIZE))
+ return -EINVAL;
+
+ if (size == 8 || size % 8)
+ return -EINVAL;
+
+ /*
+ * An overflow would result in attempting to write the restore token
+ * to the wrong location. Not catastrophic, but just return the right
+ * error code and block it.
+ */
+ alloc_size = PAGE_ALIGN(size);
+ if (alloc_size < size)
+ return -EOVERFLOW;
+
+ addr = alloc_gcs(addr, alloc_size, 0, false);
+ if (IS_ERR_VALUE(addr))
+ return addr;
+
+ /*
+ * Put a cap token at the end of the allocated region so it
+ * can be switched to.
+ */
+ if (flags & SHADOW_STACK_SET_TOKEN) {
+ /* Leave an extra empty frame as a top of stack marker? */
+ if (flags & SHADOW_STACK_SET_MARKER)
+ cap_offset = 2;
+ else
+ cap_offset = 1;
+
+ cap_ptr = (unsigned long __user *)(addr + size -
+ (cap_offset * sizeof(unsigned long)));
+ cap_val = GCS_CAP(cap_ptr);
+
+ put_user_gcs(cap_val, cap_ptr, &ret);
+ if (ret != 0) {
+ vm_munmap(addr, size);
+ return -EFAULT;
+ }
+
+ /* Ensure the new cap is viaible for GCS */
+ gcsb_dsync();
+ }
+
+ return addr;
+}
+
/*
* Apply the GCS mode configured for the specified task to the
* hardware.
--
2.39.2
Since it is not possible to return from the function that enabled GCS
without disabling GCS it is very inconvenient to use the signal handling
tests to cover GCS when GCS is not enabled by the toolchain and runtime,
something that no current distribution does. Since none of the testcases
do anything with stacks that would cause problems with GCS we can sidestep
this issue by unconditionally enabling GCS on startup and exiting with a
call to exit() rather than a return from main().
Signed-off-by: Mark Brown <[email protected]>
---
.../testing/selftests/arm64/signal/test_signals.c | 17 ++++++++++++-
.../selftests/arm64/signal/test_signals_utils.h | 29 ++++++++++++++++++++++
2 files changed, 45 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/arm64/signal/test_signals.c b/tools/testing/selftests/arm64/signal/test_signals.c
index 00051b40d71e..30e95f50db19 100644
--- a/tools/testing/selftests/arm64/signal/test_signals.c
+++ b/tools/testing/selftests/arm64/signal/test_signals.c
@@ -7,6 +7,10 @@
* Each test provides its own tde struct tdescr descriptor to link with
* this wrapper. Framework provides common helpers.
*/
+
+#include <sys/auxv.h>
+#include <sys/prctl.h>
+
#include <kselftest.h>
#include "test_signals.h"
@@ -16,6 +20,16 @@ struct tdescr *current = &tde;
int main(int argc, char *argv[])
{
+ /*
+ * Ensure GCS is at least enabled throughout the tests if
+ * supported, otherwise the inability to return from the
+ * function that enabled GCS makes it very inconvenient to set
+ * up test cases. The prctl() may fail if GCS was locked by
+ * libc setup code.
+ */
+ if (getauxval(AT_HWCAP2) & HWCAP2_GCS)
+ gcs_set_state(PR_SHADOW_STACK_ENABLE);
+
ksft_print_msg("%s :: %s\n", current->name, current->descr);
if (test_setup(current) && test_init(current)) {
test_run(current);
@@ -23,5 +37,6 @@ int main(int argc, char *argv[])
}
test_result(current);
- return current->result;
+ /* Do not return in case GCS was enabled */
+ exit(current->result);
}
diff --git a/tools/testing/selftests/arm64/signal/test_signals_utils.h b/tools/testing/selftests/arm64/signal/test_signals_utils.h
index 762c8fe9c54a..1e80808ee105 100644
--- a/tools/testing/selftests/arm64/signal/test_signals_utils.h
+++ b/tools/testing/selftests/arm64/signal/test_signals_utils.h
@@ -18,6 +18,35 @@ void test_cleanup(struct tdescr *td);
int test_run(struct tdescr *td);
void test_result(struct tdescr *td);
+#ifndef __NR_prctl
+#define __NR_prctl 167
+#endif
+
+/*
+ * The prctl takes 1 argument but we need to ensure that the other
+ * values passed in registers to the syscall are zero since the kernel
+ * validates them.
+ */
+#define gcs_set_state(state) \
+ ({ \
+ register long _num __asm__ ("x8") = __NR_prctl; \
+ register long _arg1 __asm__ ("x0") = PR_SET_SHADOW_STACK_STATUS; \
+ register long _arg2 __asm__ ("x1") = (long)(state); \
+ register long _arg3 __asm__ ("x2") = 0; \
+ register long _arg4 __asm__ ("x3") = 0; \
+ register long _arg5 __asm__ ("x4") = 0; \
+ \
+ __asm__ volatile ( \
+ "svc #0\n" \
+ : "=r"(_arg1) \
+ : "r"(_arg1), "r"(_arg2), \
+ "r"(_arg3), "r"(_arg4), \
+ "r"(_arg5), "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+ })
+
static inline bool feats_ok(struct tdescr *td)
{
if (td->feats_incompatible & td->feats_supported)
--
2.39.2
Add a context for the GCS state and include it in the signal context when
running on a system that supports GCS. We reuse the same flags that the
prctl() uses to specify which GCS features are enabled and also provide the
current GCS pointer.
We do not support enabling GCS via signal return, there is a conflict
between specifying GCSPR_EL0 and allocation of a new GCS and this is not
an ancticipated use case. We also enforce GCS configuration locking on
signal return.
Signed-off-by: Mark Brown <[email protected]>
---
arch/arm64/include/uapi/asm/sigcontext.h | 9 +++
arch/arm64/kernel/signal.c | 107 +++++++++++++++++++++++++++++++
2 files changed, 116 insertions(+)
diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
index f23c1dc3f002..7b66d245f2d2 100644
--- a/arch/arm64/include/uapi/asm/sigcontext.h
+++ b/arch/arm64/include/uapi/asm/sigcontext.h
@@ -168,6 +168,15 @@ struct zt_context {
__u16 __reserved[3];
};
+#define GCS_MAGIC 0x47435300
+
+struct gcs_context {
+ struct _aarch64_ctx head;
+ __u64 gcspr;
+ __u64 features_enabled;
+ __u64 reserved;
+};
+
#endif /* !__ASSEMBLY__ */
#include <asm/sve_context.h>
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index b5dff91274fb..7ff775495f3e 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -88,6 +88,7 @@ struct rt_sigframe_user_layout {
unsigned long fpsimd_offset;
unsigned long esr_offset;
+ unsigned long gcs_offset;
unsigned long sve_offset;
unsigned long tpidr2_offset;
unsigned long za_offset;
@@ -214,6 +215,8 @@ struct user_ctxs {
u32 za_size;
struct zt_context __user *zt;
u32 zt_size;
+ struct gcs_context __user *gcs;
+ u32 gcs_size;
};
static int preserve_fpsimd_context(struct fpsimd_context __user *ctx)
@@ -606,6 +609,82 @@ extern int restore_zt_context(struct user_ctxs *user);
#endif /* ! CONFIG_ARM64_SME */
+#ifdef CONFIG_ARM64_GCS
+
+static int preserve_gcs_context(struct gcs_context __user *ctx)
+{
+ int err = 0;
+ u64 gcspr;
+
+ /*
+ * We will add a cap token to the frame, include it in the
+ * GCSPR_EL0 we report to support stack switching via
+ * sigreturn.
+ */
+ gcs_preserve_current_state();
+ gcspr = current->thread.gcspr_el0;
+ if (task_gcs_el0_enabled(current))
+ gcspr -= 8;
+
+ __put_user_error(GCS_MAGIC, &ctx->head.magic, err);
+ __put_user_error(sizeof(*ctx), &ctx->head.size, err);
+ __put_user_error(gcspr, &ctx->gcspr, err);
+ __put_user_error(current->thread.gcs_el0_mode,
+ &ctx->features_enabled, err);
+
+ return err;
+}
+
+static int restore_gcs_context(struct user_ctxs *user)
+{
+ u64 gcspr, enabled;
+ int err = 0;
+
+ if (user->gcs_size != sizeof(*user->gcs))
+ return -EINVAL;
+
+ __get_user_error(gcspr, &user->gcs->gcspr, err);
+ __get_user_error(enabled, &user->gcs->features_enabled, err);
+ if (err)
+ return err;
+
+ /* Don't allow unknown modes */
+ if (enabled & ~PR_SHADOW_STACK_SUPPORTED_STATUS_MASK)
+ return -EINVAL;
+
+ err = gcs_check_locked(current, enabled);
+ if (err != 0)
+ return err;
+
+ /* Don't allow enabling */
+ if (!task_gcs_el0_enabled(current) &&
+ (enabled & PR_SHADOW_STACK_ENABLE))
+ return -EINVAL;
+
+ /* If we are disabling disable everything */
+ if (!(enabled & PR_SHADOW_STACK_ENABLE))
+ enabled = 0;
+
+ current->thread.gcs_el0_mode = enabled;
+
+ /*
+ * We let userspace set GCSPR_EL0 to anything here, we will
+ * validate later in gcs_restore_signal().
+ */
+ current->thread.gcspr_el0 = gcspr;
+ write_sysreg_s(current->thread.gcspr_el0, SYS_GCSPR_EL0);
+
+ return 0;
+}
+
+#else /* ! CONFIG_ARM64_GCS */
+
+/* Turn any non-optimised out attempts to use these into a link error: */
+extern int preserve_gcs_context(void __user *ctx);
+extern int restore_gcs_context(struct user_ctxs *user);
+
+#endif /* ! CONFIG_ARM64_GCS */
+
static int parse_user_sigframe(struct user_ctxs *user,
struct rt_sigframe __user *sf)
{
@@ -622,6 +701,7 @@ static int parse_user_sigframe(struct user_ctxs *user,
user->tpidr2 = NULL;
user->za = NULL;
user->zt = NULL;
+ user->gcs = NULL;
if (!IS_ALIGNED((unsigned long)base, 16))
goto invalid;
@@ -716,6 +796,17 @@ static int parse_user_sigframe(struct user_ctxs *user,
user->zt_size = size;
break;
+ case GCS_MAGIC:
+ if (!system_supports_gcs())
+ goto invalid;
+
+ if (user->gcs)
+ goto invalid;
+
+ user->gcs = (struct gcs_context __user *)head;
+ user->gcs_size = size;
+ break;
+
case EXTRA_MAGIC:
if (have_extra_context)
goto invalid;
@@ -835,6 +926,9 @@ static int restore_sigframe(struct pt_regs *regs,
err = restore_fpsimd_context(&user);
}
+ if (err == 0 && system_supports_gcs() && user.gcs)
+ err = restore_gcs_context(&user);
+
if (err == 0 && system_supports_tpidr2() && user.tpidr2)
err = restore_tpidr2_context(&user);
@@ -949,6 +1043,13 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
return err;
}
+ if (system_supports_gcs()) {
+ err = sigframe_alloc(user, &user->gcs_offset,
+ sizeof(struct gcs_context));
+ if (err)
+ return err;
+ }
+
if (system_supports_sve() || system_supports_sme()) {
unsigned int vq = 0;
@@ -1042,6 +1143,12 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user,
__put_user_error(current->thread.fault_code, &esr_ctx->esr, err);
}
+ if (system_supports_gcs() && err == 0 && user->gcs_offset) {
+ struct gcs_context __user *gcs_ctx =
+ apply_user_offset(user, user->gcs_offset);
+ err |= preserve_gcs_context(gcs_ctx);
+ }
+
/* Scalable Vector Extension state (including streaming), if present */
if ((system_supports_sve() || system_supports_sme()) &&
err == 0 && user->sve_offset) {
--
2.39.2
Add a stress test which runs one more process than we have CPUs spinning
through a very recursive function with frequent syscalls immediately prior
to return and signals being injected every 100ms. The goal is to flag up
any scheduling related issues, for example failure to ensure that barriers
are inserted when moving a GCS using task to another CPU. The test runs for
a configurable amount of time, defaulting to 10 seconds.
Signed-off-by: Mark Brown <[email protected]>
---
tools/testing/selftests/arm64/gcs/.gitignore | 2 +
tools/testing/selftests/arm64/gcs/Makefile | 6 +-
tools/testing/selftests/arm64/gcs/asm-offsets.h | 0
.../selftests/arm64/gcs/gcs-stress-thread.S | 311 ++++++++++++
tools/testing/selftests/arm64/gcs/gcs-stress.c | 532 +++++++++++++++++++++
5 files changed, 850 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/arm64/gcs/.gitignore b/tools/testing/selftests/arm64/gcs/.gitignore
index 0c86f53f68ad..1e8d1f6b27f2 100644
--- a/tools/testing/selftests/arm64/gcs/.gitignore
+++ b/tools/testing/selftests/arm64/gcs/.gitignore
@@ -1,3 +1,5 @@
basic-gcs
libc-gcs
gcs-locking
+gcs-stress
+gcs-stress-thread
diff --git a/tools/testing/selftests/arm64/gcs/Makefile b/tools/testing/selftests/arm64/gcs/Makefile
index 2173d6275956..d8b06ca51e22 100644
--- a/tools/testing/selftests/arm64/gcs/Makefile
+++ b/tools/testing/selftests/arm64/gcs/Makefile
@@ -6,7 +6,8 @@
# nolibc.
#
-TEST_GEN_PROGS := basic-gcs libc-gcs gcs-locking
+TEST_GEN_PROGS := basic-gcs libc-gcs gcs-locking gcs-stress
+TEST_GEN_PROGS_EXTENDED := gcs-stress-thread
LDLIBS+=-lpthread
@@ -18,3 +19,6 @@ $(OUTPUT)/basic-gcs: basic-gcs.c
-I../../../../../usr/include \
-std=gnu99 -I../.. -g \
-ffreestanding -Wall $^ -o $@ -lgcc
+
+$(OUTPUT)/gcs-stress-thread: gcs-stress-thread.S
+ $(CC) -nostdlib $^ -o $@
diff --git a/tools/testing/selftests/arm64/gcs/asm-offsets.h b/tools/testing/selftests/arm64/gcs/asm-offsets.h
new file mode 100644
index 000000000000..e69de29bb2d1
diff --git a/tools/testing/selftests/arm64/gcs/gcs-stress-thread.S b/tools/testing/selftests/arm64/gcs/gcs-stress-thread.S
new file mode 100644
index 000000000000..4fe8695333e5
--- /dev/null
+++ b/tools/testing/selftests/arm64/gcs/gcs-stress-thread.S
@@ -0,0 +1,311 @@
+// Program that loops for ever doing lots of recursions and system calls,
+// intended to be used as part of a stress test for GCS context switching.
+//
+// Copyright 2015-2023 Arm Ltd
+
+#include <asm/unistd.h>
+
+#define sa_sz 32
+#define sa_flags 8
+#define sa_handler 0
+#define sa_mask_sz 8
+
+#define si_code 8
+
+#define SIGINT 2
+#define SIGABRT 6
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGTERM 15
+#define SEGV_CPERR 10
+
+#define SA_NODEFER 1073741824
+#define SA_SIGINFO 4
+#define ucontext_regs 184
+
+#define PR_SET_SHADOW_STACK_STATUS 72
+# define PR_SHADOW_STACK_ENABLE (1UL << 0)
+
+#define GCSPR_EL0 S3_3_C2_C5_1
+
+.macro function name
+ .macro endfunction
+ .type \name, @function
+ .purgem endfunction
+ .endm
+\name:
+.endm
+
+// Print a single character x0 to stdout
+// Clobbers x0-x2,x8
+function putc
+ str x0, [sp, #-16]!
+
+ mov x0, #1 // STDOUT_FILENO
+ mov x1, sp
+ mov x2, #1
+ mov x8, #__NR_write
+ svc #0
+
+ add sp, sp, #16
+ ret
+endfunction
+.globl putc
+
+// Print a NUL-terminated string starting at address x0 to stdout
+// Clobbers x0-x3,x8
+function puts
+ mov x1, x0
+
+ mov x2, #0
+0: ldrb w3, [x0], #1
+ cbz w3, 1f
+ add x2, x2, #1
+ b 0b
+
+1: mov w0, #1 // STDOUT_FILENO
+ mov x8, #__NR_write
+ svc #0
+
+ ret
+endfunction
+.globl puts
+
+// Utility macro to print a literal string
+// Clobbers x0-x4,x8
+.macro puts string
+ .pushsection .rodata.str1.1, "aMS", @progbits, 1
+.L__puts_literal\@: .string "\string"
+ .popsection
+
+ ldr x0, =.L__puts_literal\@
+ bl puts
+.endm
+
+// Print an unsigned decimal number x0 to stdout
+// Clobbers x0-x4,x8
+function putdec
+ mov x1, sp
+ str x30, [sp, #-32]! // Result can't be > 20 digits
+
+ mov x2, #0
+ strb w2, [x1, #-1]! // Write the NUL terminator
+
+ mov x2, #10
+0: udiv x3, x0, x2 // div-mod loop to generate the digits
+ msub x0, x3, x2, x0
+ add w0, w0, #'0'
+ strb w0, [x1, #-1]!
+ mov x0, x3
+ cbnz x3, 0b
+
+ ldrb w0, [x1]
+ cbnz w0, 1f
+ mov w0, #'0' // Print "0" for 0, not ""
+ strb w0, [x1, #-1]!
+
+1: mov x0, x1
+ bl puts
+
+ ldr x30, [sp], #32
+ ret
+endfunction
+.globl putdec
+
+// Print an unsigned decimal number x0 to stdout, followed by a newline
+// Clobbers x0-x5,x8
+function putdecn
+ mov x5, x30
+
+ bl putdec
+ mov x0, #'\n'
+ bl putc
+
+ ret x5
+endfunction
+.globl putdecn
+
+// Fill x1 bytes starting at x0 with 0.
+// Clobbers x1, x2.
+function memclr
+ mov w2, #0
+endfunction
+.globl memclr
+ // fall through to memfill
+
+// Trivial memory fill: fill x1 bytes starting at address x0 with byte w2
+// Clobbers x1
+function memfill
+ cmp x1, #0
+ b.eq 1f
+
+0: strb w2, [x0], #1
+ subs x1, x1, #1
+ b.ne 0b
+
+1: ret
+endfunction
+.globl memfill
+
+// w0: signal number
+// x1: sa_action
+// w2: sa_flags
+// Clobbers x0-x6,x8
+function setsignal
+ str x30, [sp, #-((sa_sz + 15) / 16 * 16 + 16)]!
+
+ mov w4, w0
+ mov x5, x1
+ mov w6, w2
+
+ add x0, sp, #16
+ mov x1, #sa_sz
+ bl memclr
+
+ mov w0, w4
+ add x1, sp, #16
+ str w6, [x1, #sa_flags]
+ str x5, [x1, #sa_handler]
+ mov x2, #0
+ mov x3, #sa_mask_sz
+ mov x8, #__NR_rt_sigaction
+ svc #0
+
+ cbz w0, 1f
+
+ puts "sigaction failure\n"
+ b abort
+
+1: ldr x30, [sp], #((sa_sz + 15) / 16 * 16 + 16)
+ ret
+endfunction
+
+
+function tickle_handler
+ // Perhaps collect GCSPR_EL0 here in future?
+ ret
+endfunction
+
+function terminate_handler
+ mov w21, w0
+ mov x20, x2
+
+ puts "Terminated by signal "
+ mov w0, w21
+ bl putdec
+ puts ", no error\n"
+
+ mov x0, #0
+ mov x8, #__NR_exit
+ svc #0
+endfunction
+
+function segv_handler
+ // stash the siginfo_t *
+ mov x20, x1
+
+ // Disable GCS, we don't want additional faults logging things
+ mov x0, PR_SET_SHADOW_STACK_STATUS
+ mov x1, xzr
+ mov x2, xzr
+ mov x3, xzr
+ mov x4, xzr
+ mov x5, xzr
+ mov x8, #__NR_prctl
+ svc #0
+
+ puts "Got SIGSEGV code "
+
+ ldr x21, [x20, #si_code]
+ mov x0, x21
+ bl putdec
+
+ // GCS faults should have si_code SEGV_CPERR
+ cmp x21, #SEGV_CPERR
+ bne 1f
+
+ puts " (GCS violation)"
+1:
+ mov x0, '\n'
+ bl putc
+ b abort
+endfunction
+
+// Recurse x20 times
+.macro recurse id
+function recurse\id
+ stp x29, x30, [sp, #-16]!
+ mov x29, sp
+
+ cmp x20, 0
+ beq 1f
+ sub x20, x20, 1
+ bl recurse\id
+
+1:
+ ldp x29, x30, [sp], #16
+
+ // Do a syscall immediately prior to returning to try to provoke
+ // scheduling and migration at a point where coherency issues
+ // might trigger.
+ mov x8, #__NR_getpid
+ svc #0
+
+ ret
+endfunction
+.endmacro
+
+// Generate and use two copies so we're changing the GCS contents
+recurse 1
+recurse 2
+
+.globl _start
+function _start
+ // Run with GCS
+ mov x0, PR_SET_SHADOW_STACK_STATUS
+ mov x1, PR_SHADOW_STACK_ENABLE
+ mov x2, xzr
+ mov x3, xzr
+ mov x4, xzr
+ mov x5, xzr
+ mov x8, #__NR_prctl
+ svc #0
+ cbz x0, 1f
+ puts "Failed to enable GCS\n"
+ b abort
+1:
+
+ mov w0, #SIGTERM
+ adr x1, terminate_handler
+ mov w2, #SA_SIGINFO
+ bl setsignal
+
+ mov w0, #SIGUSR1
+ adr x1, tickle_handler
+ mov w2, #SA_SIGINFO
+ orr w2, w2, #SA_NODEFER
+ bl setsignal
+
+ mov w0, #SIGSEGV
+ adr x1, segv_handler
+ mov w2, #SA_SIGINFO
+ orr w2, w2, #SA_NODEFER
+ bl setsignal
+
+ puts "Running\n"
+
+loop:
+ // Small recursion depth so we're frequently flipping between
+ // the two recursors and changing what's on the stack
+ mov x20, #5
+ bl recurse1
+ mov x20, #5
+ bl recurse2
+ b loop
+endfunction
+
+abort:
+ mov x0, #255
+ mov x8, #__NR_exit
+ svc #0
diff --git a/tools/testing/selftests/arm64/gcs/gcs-stress.c b/tools/testing/selftests/arm64/gcs/gcs-stress.c
new file mode 100644
index 000000000000..23fd8ec37bdc
--- /dev/null
+++ b/tools/testing/selftests/arm64/gcs/gcs-stress.c
@@ -0,0 +1,532 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022-3 ARM Limited.
+ */
+
+#define _GNU_SOURCE
+#define _POSIX_C_SOURCE 199309L
+
+#include <errno.h>
+#include <getopt.h>
+#include <poll.h>
+#include <signal.h>
+#include <stdbool.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/auxv.h>
+#include <sys/epoll.h>
+#include <sys/prctl.h>
+#include <sys/types.h>
+#include <sys/uio.h>
+#include <sys/wait.h>
+#include <asm/hwcap.h>
+
+#include "../../kselftest.h"
+
+struct child_data {
+ char *name, *output;
+ pid_t pid;
+ int stdout;
+ bool output_seen;
+ bool exited;
+ int exit_status;
+ int exit_signal;
+};
+
+static int epoll_fd;
+static struct child_data *children;
+static struct epoll_event *evs;
+static int tests;
+static int num_children;
+static bool terminate;
+
+static int startup_pipe[2];
+
+static int num_processors(void)
+{
+ long nproc = sysconf(_SC_NPROCESSORS_CONF);
+ if (nproc < 0) {
+ perror("Unable to read number of processors\n");
+ exit(EXIT_FAILURE);
+ }
+
+ return nproc;
+}
+
+static void start_thread(struct child_data *child)
+{
+ int ret, pipefd[2], i;
+ struct epoll_event ev;
+
+ ret = pipe(pipefd);
+ if (ret != 0)
+ ksft_exit_fail_msg("Failed to create stdout pipe: %s (%d)\n",
+ strerror(errno), errno);
+
+ child->pid = fork();
+ if (child->pid == -1)
+ ksft_exit_fail_msg("fork() failed: %s (%d)\n",
+ strerror(errno), errno);
+
+ if (!child->pid) {
+ /*
+ * In child, replace stdout with the pipe, errors to
+ * stderr from here as kselftest prints to stdout.
+ */
+ ret = dup2(pipefd[1], 1);
+ if (ret == -1) {
+ fprintf(stderr, "dup2() %d\n", errno);
+ exit(EXIT_FAILURE);
+ }
+
+ /*
+ * Duplicate the read side of the startup pipe to
+ * FD 3 so we can close everything else.
+ */
+ ret = dup2(startup_pipe[0], 3);
+ if (ret == -1) {
+ fprintf(stderr, "dup2() %d\n", errno);
+ exit(EXIT_FAILURE);
+ }
+
+ /*
+ * Very dumb mechanism to clean open FDs other than
+ * stdio. We don't want O_CLOEXEC for the pipes...
+ */
+ for (i = 4; i < 8192; i++)
+ close(i);
+
+ /*
+ * Read from the startup pipe, there should be no data
+ * and we should block until it is closed. We just
+ * carry on on error since this isn't super critical.
+ */
+ ret = read(3, &i, sizeof(i));
+ if (ret < 0)
+ fprintf(stderr, "read(startp pipe) failed: %s (%d)\n",
+ strerror(errno), errno);
+ if (ret > 0)
+ fprintf(stderr, "%d bytes of data on startup pipe\n",
+ ret);
+ close(3);
+
+ ret = execl("gcs-stress-thread", "gcs-stress-thread", NULL);
+ fprintf(stderr, "execl(gcs-stress-thread) failed: %d (%s)\n",
+ errno, strerror(errno));
+
+ exit(EXIT_FAILURE);
+ } else {
+ /*
+ * In parent, remember the child and close our copy of the
+ * write side of stdout.
+ */
+ close(pipefd[1]);
+ child->stdout = pipefd[0];
+ child->output = NULL;
+ child->exited = false;
+ child->output_seen = false;
+
+ ev.events = EPOLLIN | EPOLLHUP;
+ ev.data.ptr = child;
+
+ ret = asprintf(&child->name, "Thread-%d", child->pid);
+ if (ret == -1)
+ ksft_exit_fail_msg("asprintf() failed\n");
+
+ ret = epoll_ctl(epoll_fd, EPOLL_CTL_ADD, child->stdout, &ev);
+ if (ret < 0) {
+ ksft_exit_fail_msg("%s EPOLL_CTL_ADD failed: %s (%d)\n",
+ child->name, strerror(errno), errno);
+ }
+ }
+
+ ksft_print_msg("Started %s\n", child->name);
+ num_children++;
+}
+
+static bool child_output_read(struct child_data *child)
+{
+ char read_data[1024];
+ char work[1024];
+ int ret, len, cur_work, cur_read;
+
+ ret = read(child->stdout, read_data, sizeof(read_data));
+ if (ret < 0) {
+ if (errno == EINTR)
+ return true;
+
+ ksft_print_msg("%s: read() failed: %s (%d)\n",
+ child->name, strerror(errno),
+ errno);
+ return false;
+ }
+ len = ret;
+
+ child->output_seen = true;
+
+ /* Pick up any partial read */
+ if (child->output) {
+ strncpy(work, child->output, sizeof(work) - 1);
+ cur_work = strnlen(work, sizeof(work));
+ free(child->output);
+ child->output = NULL;
+ } else {
+ cur_work = 0;
+ }
+
+ cur_read = 0;
+ while (cur_read < len) {
+ work[cur_work] = read_data[cur_read++];
+
+ if (work[cur_work] == '\n') {
+ work[cur_work] = '\0';
+ ksft_print_msg("%s: %s\n", child->name, work);
+ cur_work = 0;
+ } else {
+ cur_work++;
+ }
+ }
+
+ if (cur_work) {
+ work[cur_work] = '\0';
+ ret = asprintf(&child->output, "%s", work);
+ if (ret == -1)
+ ksft_exit_fail_msg("Out of memory\n");
+ }
+
+ return false;
+}
+
+static void child_output(struct child_data *child, uint32_t events,
+ bool flush)
+{
+ bool read_more;
+
+ if (events & EPOLLIN) {
+ do {
+ read_more = child_output_read(child);
+ } while (read_more);
+ }
+
+ if (events & EPOLLHUP) {
+ close(child->stdout);
+ child->stdout = -1;
+ flush = true;
+ }
+
+ if (flush && child->output) {
+ ksft_print_msg("%s: %s<EOF>\n", child->name, child->output);
+ free(child->output);
+ child->output = NULL;
+ }
+}
+
+static void child_tickle(struct child_data *child)
+{
+ if (child->output_seen && !child->exited)
+ kill(child->pid, SIGUSR1);
+}
+
+static void child_stop(struct child_data *child)
+{
+ if (!child->exited)
+ kill(child->pid, SIGTERM);
+}
+
+static void child_cleanup(struct child_data *child)
+{
+ pid_t ret;
+ int status;
+ bool fail = false;
+
+ if (!child->exited) {
+ do {
+ ret = waitpid(child->pid, &status, 0);
+ if (ret == -1 && errno == EINTR)
+ continue;
+
+ if (ret == -1) {
+ ksft_print_msg("waitpid(%d) failed: %s (%d)\n",
+ child->pid, strerror(errno),
+ errno);
+ fail = true;
+ break;
+ }
+
+ if (WIFEXITED(status)) {
+ child->exit_status = WEXITSTATUS(status);
+ child->exited = true;
+ }
+
+ if (WIFSIGNALED(status)) {
+ child->exit_signal = WTERMSIG(status);
+ ksft_print_msg("%s: Exited due to signal %d\n",
+ child->name);
+ fail = true;
+ child->exited = true;
+ }
+ } while (!child->exited);
+ }
+
+ if (!child->output_seen) {
+ ksft_print_msg("%s no output seen\n", child->name);
+ fail = true;
+ }
+
+ if (child->exit_status != 0) {
+ ksft_print_msg("%s exited with error code %d\n",
+ child->name, child->exit_status);
+ fail = true;
+ }
+
+ ksft_test_result(!fail, "%s\n", child->name);
+}
+
+static void handle_child_signal(int sig, siginfo_t *info, void *context)
+{
+ int i;
+ bool found = false;
+
+ for (i = 0; i < num_children; i++) {
+ if (children[i].pid == info->si_pid) {
+ children[i].exited = true;
+ children[i].exit_status = info->si_status;
+ found = true;
+ break;
+ }
+ }
+
+ if (!found)
+ ksft_print_msg("SIGCHLD for unknown PID %d with status %d\n",
+ info->si_pid, info->si_status);
+}
+
+static void handle_exit_signal(int sig, siginfo_t *info, void *context)
+{
+ int i;
+
+ /* If we're already exiting then don't signal again */
+ if (terminate)
+ return;
+
+ ksft_print_msg("Got signal, exiting...\n");
+
+ terminate = true;
+
+ /*
+ * This should be redundant, the main loop should clean up
+ * after us, but for safety stop everything we can here.
+ */
+ for (i = 0; i < num_children; i++)
+ child_stop(&children[i]);
+}
+
+/* Handle any pending output without blocking */
+static void drain_output(bool flush)
+{
+ int ret = 1;
+ int i;
+
+ while (ret > 0) {
+ ret = epoll_wait(epoll_fd, evs, tests, 0);
+ if (ret < 0) {
+ if (errno == EINTR)
+ continue;
+ ksft_print_msg("epoll_wait() failed: %s (%d)\n",
+ strerror(errno), errno);
+ }
+
+ for (i = 0; i < ret; i++)
+ child_output(evs[i].data.ptr, evs[i].events, flush);
+ }
+}
+
+static const struct option options[] = {
+ { "timeout", required_argument, NULL, 't' },
+ { }
+};
+
+int main(int argc, char **argv)
+{
+ int seen_children;
+ bool all_children_started = false;
+ int gcs_threads;
+ int timeout = 10;
+ int ret, cpus, i, c;
+ struct sigaction sa;
+
+ while ((c = getopt_long(argc, argv, "t:", options, NULL)) != -1) {
+ switch (c) {
+ case 't':
+ ret = sscanf(optarg, "%d", &timeout);
+ if (ret != 1)
+ ksft_exit_fail_msg("Failed to parse timeout %s\n",
+ optarg);
+ break;
+ default:
+ ksft_exit_fail_msg("Unknown argument\n");
+ }
+ }
+
+ cpus = num_processors();
+ tests = 0;
+
+ if (getauxval(AT_HWCAP2) & HWCAP2_GCS) {
+ /* One extra thread, trying to trigger migrations */
+ gcs_threads = cpus + 1;
+ tests += gcs_threads;
+ } else {
+ gcs_threads = 0;
+ }
+
+ ksft_print_header();
+ ksft_set_plan(tests);
+
+ ksft_print_msg("%d CPUs, %d GCS threads\n",
+ cpus, gcs_threads);
+
+ if (!tests)
+ ksft_exit_skip("No tests scheduled\n");
+
+ if (timeout > 0)
+ ksft_print_msg("Will run for %ds\n", timeout);
+ else
+ ksft_print_msg("Will run until terminated\n");
+
+ children = calloc(sizeof(*children), tests);
+ if (!children)
+ ksft_exit_fail_msg("Unable to allocate child data\n");
+
+ ret = epoll_create1(EPOLL_CLOEXEC);
+ if (ret < 0)
+ ksft_exit_fail_msg("epoll_create1() failed: %s (%d)\n",
+ strerror(errno), ret);
+ epoll_fd = ret;
+
+ /* Create a pipe which children will block on before execing */
+ ret = pipe(startup_pipe);
+ if (ret != 0)
+ ksft_exit_fail_msg("Failed to create startup pipe: %s (%d)\n",
+ strerror(errno), errno);
+
+ /* Get signal handers ready before we start any children */
+ memset(&sa, 0, sizeof(sa));
+ sa.sa_sigaction = handle_exit_signal;
+ sa.sa_flags = SA_RESTART | SA_SIGINFO;
+ sigemptyset(&sa.sa_mask);
+ ret = sigaction(SIGINT, &sa, NULL);
+ if (ret < 0)
+ ksft_print_msg("Failed to install SIGINT handler: %s (%d)\n",
+ strerror(errno), errno);
+ ret = sigaction(SIGTERM, &sa, NULL);
+ if (ret < 0)
+ ksft_print_msg("Failed to install SIGTERM handler: %s (%d)\n",
+ strerror(errno), errno);
+ sa.sa_sigaction = handle_child_signal;
+ ret = sigaction(SIGCHLD, &sa, NULL);
+ if (ret < 0)
+ ksft_print_msg("Failed to install SIGCHLD handler: %s (%d)\n",
+ strerror(errno), errno);
+
+ evs = calloc(tests, sizeof(*evs));
+ if (!evs)
+ ksft_exit_fail_msg("Failed to allocated %d epoll events\n",
+ tests);
+
+ for (i = 0; i < gcs_threads; i++)
+ start_thread(&children[i]);
+
+ /*
+ * All children started, close the startup pipe and let them
+ * run.
+ */
+ close(startup_pipe[0]);
+ close(startup_pipe[1]);
+
+ timeout *= 10;
+ for (;;) {
+ /* Did we get a signal asking us to exit? */
+ if (terminate)
+ break;
+
+ /*
+ * Timeout is counted in 100ms with no output, the
+ * tests print during startup then are silent when
+ * running so this should ensure they all ran enough
+ * to install the signal handler, this is especially
+ * useful in emulation where we will both be slow and
+ * likely to have a large set of VLs.
+ */
+ ret = epoll_wait(epoll_fd, evs, tests, 100);
+ if (ret < 0) {
+ if (errno == EINTR)
+ continue;
+ ksft_exit_fail_msg("epoll_wait() failed: %s (%d)\n",
+ strerror(errno), errno);
+ }
+
+ /* Output? */
+ if (ret > 0) {
+ for (i = 0; i < ret; i++) {
+ child_output(evs[i].data.ptr, evs[i].events,
+ false);
+ }
+ continue;
+ }
+
+ /* Otherwise epoll_wait() timed out */
+
+ /*
+ * If the child processes have not produced output they
+ * aren't actually running the tests yet.
+ */
+ if (!all_children_started) {
+ seen_children = 0;
+
+ for (i = 0; i < num_children; i++)
+ if (children[i].output_seen ||
+ children[i].exited)
+ seen_children++;
+
+ if (seen_children != num_children) {
+ ksft_print_msg("Waiting for %d children\n",
+ num_children - seen_children);
+ continue;
+ }
+
+ all_children_started = true;
+ }
+
+ ksft_print_msg("Sending signals, timeout remaining: %d00ms\n",
+ timeout);
+
+ for (i = 0; i < num_children; i++)
+ child_tickle(&children[i]);
+
+ /* Negative timeout means run indefinitely */
+ if (timeout < 0)
+ continue;
+ if (--timeout == 0)
+ break;
+ }
+
+ ksft_print_msg("Finishing up...\n");
+ terminate = true;
+
+ for (i = 0; i < tests; i++)
+ child_stop(&children[i]);
+
+ drain_output(false);
+
+ for (i = 0; i < tests; i++)
+ child_cleanup(&children[i]);
+
+ drain_output(true);
+
+ ksft_print_cnts();
+
+ return 0;
+}
--
2.39.2
Do some testing of the signal handling for GCS, checking that a GCS
frame has the expected information in it and that the expected signals
are delivered with invalid operations.
Signed-off-by: Mark Brown <[email protected]>
---
tools/testing/selftests/arm64/signal/.gitignore | 1 +
.../selftests/arm64/signal/test_signals_utils.h | 10 +++
.../arm64/signal/testcases/gcs_exception_fault.c | 59 ++++++++++++++++
.../selftests/arm64/signal/testcases/gcs_frame.c | 78 ++++++++++++++++++++++
.../arm64/signal/testcases/gcs_write_fault.c | 67 +++++++++++++++++++
5 files changed, 215 insertions(+)
diff --git a/tools/testing/selftests/arm64/signal/.gitignore b/tools/testing/selftests/arm64/signal/.gitignore
index 839e3a252629..26de12918890 100644
--- a/tools/testing/selftests/arm64/signal/.gitignore
+++ b/tools/testing/selftests/arm64/signal/.gitignore
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
mangle_*
fake_sigreturn_*
+gcs_*
sme_*
ssve_*
sve_*
diff --git a/tools/testing/selftests/arm64/signal/test_signals_utils.h b/tools/testing/selftests/arm64/signal/test_signals_utils.h
index 1e80808ee105..36fc12b3cd60 100644
--- a/tools/testing/selftests/arm64/signal/test_signals_utils.h
+++ b/tools/testing/selftests/arm64/signal/test_signals_utils.h
@@ -6,6 +6,7 @@
#include <assert.h>
#include <stdio.h>
+#include <stdint.h>
#include <string.h>
#include <linux/compiler.h>
@@ -47,6 +48,15 @@ void test_result(struct tdescr *td);
_arg1; \
})
+static inline __attribute__((always_inline)) uint64_t get_gcspr_el0(void)
+{
+ uint64_t val;
+
+ asm volatile("mrs %0, S3_3_C2_C5_1" : "=r" (val));
+
+ return val;
+}
+
static inline bool feats_ok(struct tdescr *td)
{
if (td->feats_incompatible & td->feats_supported)
diff --git a/tools/testing/selftests/arm64/signal/testcases/gcs_exception_fault.c b/tools/testing/selftests/arm64/signal/testcases/gcs_exception_fault.c
new file mode 100644
index 000000000000..532d533592a1
--- /dev/null
+++ b/tools/testing/selftests/arm64/signal/testcases/gcs_exception_fault.c
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 ARM Limited
+ */
+
+#include <errno.h>
+#include <signal.h>
+#include <unistd.h>
+
+#include <sys/mman.h>
+#include <sys/prctl.h>
+
+#include "test_signals_utils.h"
+#include "testcases.h"
+
+/* This should be includable from some standard header, but which? */
+#ifndef SEGV_CPERR
+#define SEGV_CPERR 10
+#endif
+
+static inline void gcsss1(uint64_t Xt)
+{
+ asm volatile (
+ "sys #3, C7, C7, #2, %0\n"
+ :
+ : "rZ" (Xt)
+ : "memory");
+}
+
+static int gcs_op_fault_trigger(struct tdescr *td)
+{
+ /*
+ * The slot below our current GCS should be in a valid GCS but
+ * must not have a valid cap in it.
+ */
+ gcsss1(get_gcspr_el0() - 8);
+
+ return 0;
+}
+
+static int gcs_op_fault_signal(struct tdescr *td, siginfo_t *si,
+ ucontext_t *uc)
+{
+ ASSERT_GOOD_CONTEXT(uc);
+
+ return 1;
+}
+
+struct tdescr tde = {
+ .name = "Invalid GCS operation",
+ .descr = "An invalid GCS operation generates the expected signal",
+ .feats_required = FEAT_GCS,
+ .timeout = 3,
+ .sig_ok = SIGSEGV,
+ .sig_ok_code = SEGV_CPERR,
+ .sanity_disabled = true,
+ .trigger = gcs_op_fault_trigger,
+ .run = gcs_op_fault_signal,
+};
diff --git a/tools/testing/selftests/arm64/signal/testcases/gcs_frame.c b/tools/testing/selftests/arm64/signal/testcases/gcs_frame.c
new file mode 100644
index 000000000000..d67cb26195a6
--- /dev/null
+++ b/tools/testing/selftests/arm64/signal/testcases/gcs_frame.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 ARM Limited
+ */
+
+#include <signal.h>
+#include <ucontext.h>
+#include <sys/prctl.h>
+
+#include "test_signals_utils.h"
+#include "testcases.h"
+
+static union {
+ ucontext_t uc;
+ char buf[1024 * 64];
+} context;
+
+static int gcs_regs(struct tdescr *td, siginfo_t *si, ucontext_t *uc)
+{
+ size_t offset;
+ struct _aarch64_ctx *head = GET_BUF_RESV_HEAD(context);
+ struct gcs_context *gcs;
+ unsigned long expected, gcspr;
+ int ret;
+
+ ret = prctl(PR_GET_SHADOW_STACK_STATUS, &expected, 0, 0, 0);
+ if (ret != 0) {
+ fprintf(stderr, "Unable to query GCS status\n");
+ return 1;
+ }
+
+ /* We expect a cap to be added to the GCS in the signal frame */
+ gcspr = get_gcspr_el0();
+ gcspr -= 8;
+ fprintf(stderr, "Expecting GCSPR_EL0 %lx\n", gcspr);
+
+ if (!get_current_context(td, &context.uc, sizeof(context))) {
+ fprintf(stderr, "Failed getting context\n");
+ return 1;
+ }
+ fprintf(stderr, "Got context\n");
+
+ head = get_header(head, GCS_MAGIC, GET_BUF_RESV_SIZE(context),
+ &offset);
+ if (!head) {
+ fprintf(stderr, "No GCS context\n");
+ return 1;
+ }
+
+ gcs = (struct gcs_context *)head;
+
+ /* Basic size validation is done in get_current_context() */
+
+ if (gcs->features_enabled != expected) {
+ fprintf(stderr, "Features enabled %llx but expected %lx\n",
+ gcs->features_enabled, expected);
+ return 1;
+ }
+
+ if (gcs->gcspr != gcspr) {
+ fprintf(stderr, "Got GCSPR %llx but expected %lx\n",
+ gcs->gcspr, gcspr);
+ return 1;
+ }
+
+ fprintf(stderr, "GCS context validated\n");
+ td->pass = 1;
+
+ return 0;
+}
+
+struct tdescr tde = {
+ .name = "GCS basics",
+ .descr = "Validate a GCS signal context",
+ .feats_required = FEAT_GCS,
+ .timeout = 3,
+ .run = gcs_regs,
+};
diff --git a/tools/testing/selftests/arm64/signal/testcases/gcs_write_fault.c b/tools/testing/selftests/arm64/signal/testcases/gcs_write_fault.c
new file mode 100644
index 000000000000..126b1a294a29
--- /dev/null
+++ b/tools/testing/selftests/arm64/signal/testcases/gcs_write_fault.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 ARM Limited
+ */
+
+#include <errno.h>
+#include <signal.h>
+#include <unistd.h>
+
+#include <sys/mman.h>
+#include <sys/prctl.h>
+
+#include "test_signals_utils.h"
+#include "testcases.h"
+
+static uint64_t *gcs_page;
+
+#ifndef __NR_map_shadow_stack
+#define __NR_map_shadow_stack 452
+#endif
+
+static bool alloc_gcs(struct tdescr *td)
+{
+ long page_size = sysconf(_SC_PAGE_SIZE);
+
+ gcs_page = (void *)syscall(__NR_map_shadow_stack, 0,
+ page_size, 0);
+ if (gcs_page == MAP_FAILED) {
+ fprintf(stderr, "Failed to map %ld byte GCS: %d\n",
+ page_size, errno);
+ return false;
+ }
+
+ return true;
+}
+
+static int gcs_write_fault_trigger(struct tdescr *td)
+{
+ /* Verify that the page is readable (ie, not completely unmapped) */
+ fprintf(stderr, "Read value 0x%lx\n", gcs_page[0]);
+
+ /* A regular write should trigger a fault */
+ gcs_page[0] = EINVAL;
+
+ return 0;
+}
+
+static int gcs_write_fault_signal(struct tdescr *td, siginfo_t *si,
+ ucontext_t *uc)
+{
+ ASSERT_GOOD_CONTEXT(uc);
+
+ return 1;
+}
+
+
+struct tdescr tde = {
+ .name = "GCS write fault",
+ .descr = "Normal writes to a GCS segfault",
+ .feats_required = FEAT_GCS,
+ .timeout = 3,
+ .sig_ok = SIGSEGV,
+ .sanity_disabled = true,
+ .init = alloc_gcs,
+ .trigger = gcs_write_fault_trigger,
+ .run = gcs_write_fault_signal,
+};
--
2.39.2
There are things like threads which nolibc struggles with which we want
to add coverage for, and the ABI allows us to test most of these even if
libc itself does not understand GCS so add a test application built
using the system libc.
Signed-off-by: Mark Brown <[email protected]>
---
tools/testing/selftests/arm64/gcs/.gitignore | 1 +
tools/testing/selftests/arm64/gcs/Makefile | 4 +-
tools/testing/selftests/arm64/gcs/gcs-util.h | 10 +
tools/testing/selftests/arm64/gcs/libc-gcs.c | 742 +++++++++++++++++++++++++++
4 files changed, 756 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/arm64/gcs/.gitignore b/tools/testing/selftests/arm64/gcs/.gitignore
index 0e5e695ecba5..5810c4a163d4 100644
--- a/tools/testing/selftests/arm64/gcs/.gitignore
+++ b/tools/testing/selftests/arm64/gcs/.gitignore
@@ -1 +1,2 @@
basic-gcs
+libc-gcs
diff --git a/tools/testing/selftests/arm64/gcs/Makefile b/tools/testing/selftests/arm64/gcs/Makefile
index 61a30f483429..a8fdf21e9a47 100644
--- a/tools/testing/selftests/arm64/gcs/Makefile
+++ b/tools/testing/selftests/arm64/gcs/Makefile
@@ -6,7 +6,9 @@
# nolibc.
#
-TEST_GEN_PROGS := basic-gcs
+TEST_GEN_PROGS := basic-gcs libc-gcs
+
+LDLIBS+=-lpthread
include ../../lib.mk
diff --git a/tools/testing/selftests/arm64/gcs/gcs-util.h b/tools/testing/selftests/arm64/gcs/gcs-util.h
index b37801c95604..4bafd1d7feb5 100644
--- a/tools/testing/selftests/arm64/gcs/gcs-util.h
+++ b/tools/testing/selftests/arm64/gcs/gcs-util.h
@@ -16,6 +16,16 @@
#define __NR_prctl 167
#endif
+#ifndef NT_ARM_GCS
+#define NT_ARM_GCS 0x40e
+
+struct user_gcs {
+ __u64 features_enabled;
+ __u64 features_locked;
+ __u64 gcspr_el0;
+};
+#endif
+
/* Shadow Stack/Guarded Control Stack interface */
#define PR_GET_SHADOW_STACK_STATUS 71
#define PR_SET_SHADOW_STACK_STATUS 72
diff --git a/tools/testing/selftests/arm64/gcs/libc-gcs.c b/tools/testing/selftests/arm64/gcs/libc-gcs.c
new file mode 100644
index 000000000000..58141d46f861
--- /dev/null
+++ b/tools/testing/selftests/arm64/gcs/libc-gcs.c
@@ -0,0 +1,742 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 ARM Limited.
+ */
+
+#define _GNU_SOURCE
+
+#include <pthread.h>
+#include <stdbool.h>
+
+#include <sys/auxv.h>
+#include <sys/mman.h>
+#include <sys/prctl.h>
+#include <sys/ptrace.h>
+#include <sys/uio.h>
+
+#include <asm/hwcap.h>
+#include <asm/mman.h>
+
+#include <linux/compiler.h>
+
+#include "kselftest_harness.h"
+
+#include "gcs-util.h"
+
+#define my_syscall2(num, arg1, arg2) \
+({ \
+ register long _num __asm__ ("x8") = (num); \
+ register long _arg1 __asm__ ("x0") = (long)(arg1); \
+ register long _arg2 __asm__ ("x1") = (long)(arg2); \
+ register long _arg3 __asm__ ("x2") = 0; \
+ register long _arg4 __asm__ ("x3") = 0; \
+ register long _arg5 __asm__ ("x4") = 0; \
+ \
+ __asm__ volatile ( \
+ "svc #0\n" \
+ : "=r"(_arg1) \
+ : "r"(_arg1), "r"(_arg2), \
+ "r"(_arg3), "r"(_arg4), \
+ "r"(_arg5), "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+static noinline void gcs_recurse(int depth)
+{
+ if (depth)
+ gcs_recurse(depth - 1);
+
+ /* Prevent tail call optimization so we actually recurse */
+ asm volatile("dsb sy" : : : "memory");
+}
+
+/* Smoke test that a function call and return works*/
+TEST(can_call_function)
+{
+ gcs_recurse(0);
+}
+
+static void *gcs_test_thread(void *arg)
+{
+ int ret;
+ unsigned long mode;
+
+ /*
+ * Some libcs don't seem to fill unused arguments with 0 but
+ * the kernel validates this so we supply all 5 arguments.
+ */
+ ret = prctl(PR_GET_SHADOW_STACK_STATUS, &mode, 0, 0, 0);
+ if (ret != 0) {
+ ksft_print_msg("PR_GET_SHADOW_STACK_STATUS failed: %d\n", ret);
+ return NULL;
+ }
+
+ if (!(mode & PR_SHADOW_STACK_ENABLE)) {
+ ksft_print_msg("GCS not enabled in thread, mode is %u\n",
+ mode);
+ return NULL;
+ }
+
+ /* Just in case... */
+ gcs_recurse(0);
+
+ /* Use a non-NULL value to indicate a pass */
+ return &gcs_test_thread;
+}
+
+/* Verify that if we start a new thread it has GCS enabled */
+TEST(gcs_enabled_thread)
+{
+ pthread_t thread;
+ void *thread_ret;
+ int ret;
+
+ ret = pthread_create(&thread, NULL, gcs_test_thread, NULL);
+ ASSERT_TRUE(ret == 0);
+ if (ret != 0)
+ return;
+
+ ret = pthread_join(thread, &thread_ret);
+ ASSERT_TRUE(ret == 0);
+ if (ret != 0)
+ return;
+
+ ASSERT_TRUE(thread_ret != NULL);
+}
+
+/* Read the GCS until we find the terminator */
+TEST(gcs_find_terminator)
+{
+ unsigned long *gcs, *cur;
+
+ gcs = get_gcspr();
+ cur = gcs;
+ while (*cur)
+ cur++;
+
+ ksft_print_msg("GCS in use from %p-%p\n", gcs, cur);
+
+ /*
+ * We should have at least whatever called into this test so
+ * the two pointer should differ.
+ */
+ ASSERT_TRUE(gcs != cur);
+}
+
+/*
+ * We can access a GCS via ptrace
+ *
+ * This could usefully have a fixture but note that each test is
+ * fork()ed into a new child whcih causes issues. Might be better to
+ * lift at least some of this out into a separate, non-harness, test
+ * program.
+ */
+TEST(ptrace_read_write)
+{
+ pid_t child, pid;
+ int ret, status;
+ siginfo_t si;
+ uint64_t val, rval, gcspr;
+ struct user_gcs child_gcs;
+ struct iovec iov, local_iov, remote_iov;
+
+ child = fork();
+ if (child == -1) {
+ ksft_print_msg("fork() failed: %d (%s)\n",
+ errno, strerror(errno));
+ ASSERT_NE(child, -1);
+ }
+
+ if (child == 0) {
+ /*
+ * In child, make sure there's something on the stack and
+ * ask to be traced.
+ */
+ gcs_recurse(0);
+ if (ptrace(PTRACE_TRACEME, -1, NULL, NULL))
+ ksft_exit_fail_msg("PTRACE_TRACEME", strerror(errno));
+
+ if (raise(SIGSTOP))
+ ksft_exit_fail_msg("raise(SIGSTOP)", strerror(errno));
+
+ return;
+ }
+
+ ksft_print_msg("Child: %d\n", child);
+
+ /* Attach to the child */
+ while (1) {
+ int sig;
+
+ pid = wait(&status);
+ if (pid == -1) {
+ ksft_print_msg("wait() failed: %s",
+ strerror(errno));
+ goto error;
+ }
+
+ /*
+ * This should never happen but it's hard to flag in
+ * the framework.
+ */
+ if (pid != child)
+ continue;
+
+ if (WIFEXITED(status) || WIFSIGNALED(status))
+ ksft_exit_fail_msg("Child died unexpectedly\n");
+
+ if (!WIFSTOPPED(status))
+ goto error;
+
+ sig = WSTOPSIG(status);
+
+ if (ptrace(PTRACE_GETSIGINFO, pid, NULL, &si)) {
+ if (errno == ESRCH) {
+ ASSERT_NE(errno, ESRCH);
+ return;
+ }
+
+ if (errno == EINVAL) {
+ sig = 0; /* bust group-stop */
+ goto cont;
+ }
+
+ ksft_print_msg("PTRACE_GETSIGINFO: %s\n",
+ strerror(errno));
+ goto error;
+ }
+
+ if (sig == SIGSTOP && si.si_code == SI_TKILL &&
+ si.si_pid == pid)
+ break;
+
+ cont:
+ if (ptrace(PTRACE_CONT, pid, NULL, sig)) {
+ if (errno == ESRCH) {
+ ASSERT_NE(errno, ESRCH);
+ return;
+ }
+
+ ksft_print_msg("PTRACE_CONT: %s\n", strerror(errno));
+ goto error;
+ }
+ }
+
+ /* Where is the child GCS? */
+ iov.iov_base = &child_gcs;
+ iov.iov_len = sizeof(child_gcs);
+ ret = ptrace(PTRACE_GETREGSET, child, NT_ARM_GCS, &iov);
+ if (ret != 0) {
+ ksft_print_msg("Failed to read child GCS state: %s (%d)\n",
+ strerror(errno), errno);
+ goto error;
+ }
+
+ /* We should have inherited GCS over fork(), confirm */
+ if (!(child_gcs.features_enabled & PR_SHADOW_STACK_ENABLE)) {
+ ASSERT_TRUE(child_gcs.features_enabled &
+ PR_SHADOW_STACK_ENABLE);
+ goto error;
+ }
+
+ gcspr = child_gcs.gcspr_el0;
+ ksft_print_msg("Child GCSPR 0x%lx, flags %x, locked %x\n",
+ gcspr, child_gcs.features_enabled,
+ child_gcs.features_locked);
+
+ /* Ideally we'd cross check with the child memory map */
+
+ errno = 0;
+ val = ptrace(PTRACE_PEEKDATA, child, (void *)gcspr, NULL);
+ ret = errno;
+ if (ret != 0)
+ ksft_print_msg("PTRACE_PEEKDATA failed: %s (%d)\n",
+ strerror(ret), ret);
+ EXPECT_EQ(ret, 0);
+
+ /* The child should be in a function, the GCSPR shouldn't be 0 */
+ EXPECT_NE(val, 0);
+
+ /* Same thing via process_vm_readv() */
+ local_iov.iov_base = &rval;
+ local_iov.iov_len = sizeof(rval);
+ remote_iov.iov_base = (void *)gcspr;
+ remote_iov.iov_len = sizeof(rval);
+ ret = process_vm_writev(child, &local_iov, 1, &remote_iov, 1, 0);
+ if (ret == -1)
+ ksft_print_msg("process_vm_readv() failed: %s (%d)\n",
+ strerror(errno), errno);
+ EXPECT_EQ(ret, sizeof(rval));
+ EXPECT_EQ(val, rval);
+
+ /* Write data via a peek */
+ ret = ptrace(PTRACE_POKEDATA, child, (void *)gcspr, NULL);
+ if (ret == -1)
+ ksft_print_msg("PTRACE_POKEDATA failed: %s (%d)\n",
+ strerror(errno), errno);
+ EXPECT_EQ(ret, 0);
+ EXPECT_EQ(0, ptrace(PTRACE_PEEKDATA, child, (void *)gcspr, NULL));
+
+ /* Restore what we had before, this time with process_vm_writev() */
+ local_iov.iov_base = &rval;
+ local_iov.iov_len = sizeof(val);
+ remote_iov.iov_base = (void *)gcspr;
+ remote_iov.iov_len = sizeof(rval);
+ ret = process_vm_readv(child, &local_iov, 1, &remote_iov, 1, 0);
+ if (ret == -1)
+ ksft_print_msg("process_vm_writev() failed: %s (%d)\n",
+ strerror(errno), errno);
+ EXPECT_EQ(ret, sizeof(rval));
+
+ EXPECT_EQ(val, ptrace(PTRACE_PEEKDATA, child, (void *)gcspr, NULL));
+
+ /* That's all, folks */
+ kill(child, SIGKILL);
+ return;
+
+error:
+ kill(child, SIGKILL);
+ ASSERT_FALSE(true);
+}
+
+FIXTURE(map_gcs)
+{
+ unsigned long *stack;
+};
+
+FIXTURE_VARIANT(map_gcs)
+{
+ size_t stack_size;
+ unsigned long flags;
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s2k_cap_marker)
+{
+ .stack_size = 2 * 1024,
+ .flags = SHADOW_STACK_SET_MARKER | SHADOW_STACK_SET_TOKEN,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s2k_cap)
+{
+ .stack_size = 2 * 1024,
+ .flags = SHADOW_STACK_SET_TOKEN,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s2k_marker)
+{
+ .stack_size = 2 * 1024,
+ .flags = SHADOW_STACK_SET_MARKER,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s2k)
+{
+ .stack_size = 2 * 1024,
+ .flags = 0,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s4k_cap_marker)
+{
+ .stack_size = 4 * 1024,
+ .flags = SHADOW_STACK_SET_MARKER | SHADOW_STACK_SET_TOKEN,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s4k_cap)
+{
+ .stack_size = 4 * 1024,
+ .flags = SHADOW_STACK_SET_TOKEN,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s3k_marker)
+{
+ .stack_size = 4 * 1024,
+ .flags = SHADOW_STACK_SET_MARKER,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s4k)
+{
+ .stack_size = 4 * 1024,
+ .flags = 0,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s16k_cap_marker)
+{
+ .stack_size = 16 * 1024,
+ .flags = SHADOW_STACK_SET_MARKER | SHADOW_STACK_SET_TOKEN,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s16k_cap)
+{
+ .stack_size = 16 * 1024,
+ .flags = SHADOW_STACK_SET_TOKEN,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s16k_marker)
+{
+ .stack_size = 16 * 1024,
+ .flags = SHADOW_STACK_SET_MARKER,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s16k)
+{
+ .stack_size = 16 * 1024,
+ .flags = 0,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s64k_cap_marker)
+{
+ .stack_size = 64 * 1024,
+ .flags = SHADOW_STACK_SET_MARKER | SHADOW_STACK_SET_TOKEN,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s64k_cap)
+{
+ .stack_size = 64 * 1024,
+ .flags = SHADOW_STACK_SET_TOKEN,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s64k_marker)
+{
+ .stack_size = 64 * 1024,
+ .flags = SHADOW_STACK_SET_MARKER,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s64k)
+{
+ .stack_size = 64 * 1024,
+ .flags = 0,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s128k_cap_marker)
+{
+ .stack_size = 128 * 1024,
+ .flags = SHADOW_STACK_SET_MARKER | SHADOW_STACK_SET_TOKEN,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s128k_cap)
+{
+ .stack_size = 128 * 1024,
+ .flags = SHADOW_STACK_SET_TOKEN,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s128k_marker)
+{
+ .stack_size = 128 * 1024,
+ .flags = SHADOW_STACK_SET_MARKER,
+};
+
+FIXTURE_VARIANT_ADD(map_gcs, s128k)
+{
+ .stack_size = 128 * 1024,
+ .flags = 0,
+};
+
+FIXTURE_SETUP(map_gcs)
+{
+ self->stack = (void *)syscall(__NR_map_shadow_stack, 0,
+ variant->stack_size,
+ variant->flags);
+ ASSERT_FALSE(self->stack == MAP_FAILED);
+ ksft_print_msg("Allocated stack from %p-%p\n", self->stack,
+ (unsigned long)self->stack + variant->stack_size);
+}
+
+FIXTURE_TEARDOWN(map_gcs)
+{
+ int ret;
+
+ if (self->stack != MAP_FAILED) {
+ ret = munmap(self->stack, variant->stack_size);
+ ASSERT_EQ(ret, 0);
+ }
+}
+
+/* The stack has a cap token */
+TEST_F(map_gcs, stack_capped)
+{
+ unsigned long *stack = self->stack;
+ size_t cap_index;
+
+ cap_index = (variant->stack_size / sizeof(unsigned long));
+
+ switch (variant->flags & (SHADOW_STACK_SET_MARKER | SHADOW_STACK_SET_TOKEN)) {
+ case SHADOW_STACK_SET_MARKER | SHADOW_STACK_SET_TOKEN:
+ cap_index -= 2;
+ break;
+ case SHADOW_STACK_SET_TOKEN:
+ cap_index -= 1;
+ break;
+ case SHADOW_STACK_SET_MARKER:
+ case 0:
+ /* No cap, no test */
+ return;
+ }
+
+ ASSERT_EQ(stack[cap_index], GCS_CAP(&stack[cap_index]));
+}
+
+/* The top of the stack is 0 */
+TEST_F(map_gcs, stack_terminated)
+{
+ unsigned long *stack = self->stack;
+ size_t term_index;
+
+ if (!(variant->flags & SHADOW_STACK_SET_MARKER))
+ return;
+
+ term_index = (variant->stack_size / sizeof(unsigned long)) - 1;
+
+ ASSERT_EQ(stack[term_index], 0);
+}
+
+/* Writes should fault */
+TEST_F_SIGNAL(map_gcs, not_writeable, SIGSEGV)
+{
+ self->stack[0] = 0;
+}
+
+/* Put it all together, we can safely switch to and from the stack */
+TEST_F(map_gcs, stack_switch)
+{
+ size_t cap_index;
+ cap_index = (variant->stack_size / sizeof(unsigned long));
+ unsigned long *orig_gcspr_el0, *pivot_gcspr_el0;
+
+ /* Skip over the stack terminator and point at the cap */
+ switch (variant->flags & (SHADOW_STACK_SET_MARKER | SHADOW_STACK_SET_TOKEN)) {
+ case SHADOW_STACK_SET_MARKER | SHADOW_STACK_SET_TOKEN:
+ cap_index -= 2;
+ break;
+ case SHADOW_STACK_SET_TOKEN:
+ cap_index -= 1;
+ break;
+ case SHADOW_STACK_SET_MARKER:
+ case 0:
+ /* No cap, no test */
+ return;
+ }
+ pivot_gcspr_el0 = &self->stack[cap_index];
+
+ /* Pivot to the new GCS */
+ ksft_print_msg("Pivoting to %p from %p, target has value 0x%lx\n",
+ pivot_gcspr_el0, get_gcspr(),
+ *pivot_gcspr_el0);
+ gcsss1(pivot_gcspr_el0);
+ orig_gcspr_el0 = gcsss2();
+ ksft_print_msg("Pivoted to %p from %p, target has value 0x%lx\n",
+ pivot_gcspr_el0, get_gcspr(),
+ *pivot_gcspr_el0);
+
+ ksft_print_msg("Pivoted, GCSPR_EL0 now %p\n", get_gcspr());
+
+ /* New GCS must be in the new buffer */
+ ASSERT_TRUE((unsigned long)get_gcspr() > (unsigned long)self->stack);
+ ASSERT_TRUE((unsigned long)get_gcspr() <=
+ (unsigned long)self->stack + variant->stack_size);
+
+ /* We should be able to use all but 2 slots of the new stack */
+ ksft_print_msg("Recursing %d levels\n", cap_index - 1);
+ gcs_recurse(cap_index - 1);
+
+ /* Pivot back to the original GCS */
+ gcsss1(orig_gcspr_el0);
+ pivot_gcspr_el0 = gcsss2();
+
+ gcs_recurse(0);
+ ksft_print_msg("Pivoted back to GCSPR_EL0 0x%lx\n", get_gcspr());
+}
+
+/* We fault if we try to go beyond the end of the stack */
+TEST_F_SIGNAL(map_gcs, stack_overflow, SIGSEGV)
+{
+ size_t cap_index;
+ cap_index = (variant->stack_size / sizeof(unsigned long));
+ unsigned long *orig_gcspr_el0, *pivot_gcspr_el0;
+
+ /* Skip over the stack terminator and point at the cap */
+ switch (variant->flags & (SHADOW_STACK_SET_MARKER | SHADOW_STACK_SET_TOKEN)) {
+ case SHADOW_STACK_SET_MARKER | SHADOW_STACK_SET_TOKEN:
+ cap_index -= 2;
+ break;
+ case SHADOW_STACK_SET_TOKEN:
+ cap_index -= 1;
+ break;
+ case SHADOW_STACK_SET_MARKER:
+ case 0:
+ /* No cap, no test but we need to SEGV to avoid a false fail */
+ orig_gcspr_el0 = get_gcspr();
+ *orig_gcspr_el0 = 0;
+ return;
+ }
+ pivot_gcspr_el0 = &self->stack[cap_index];
+
+ /* Pivot to the new GCS */
+ ksft_print_msg("Pivoting to %p from %p, target has value 0x%lx\n",
+ pivot_gcspr_el0, get_gcspr(),
+ *pivot_gcspr_el0);
+ gcsss1(pivot_gcspr_el0);
+ orig_gcspr_el0 = gcsss2();
+ ksft_print_msg("Pivoted to %p from %p, target has value 0x%lx\n",
+ pivot_gcspr_el0, get_gcspr(),
+ *pivot_gcspr_el0);
+
+ ksft_print_msg("Pivoted, GCSPR_EL0 now %p\n", get_gcspr());
+
+ /* New GCS must be in the new buffer */
+ ASSERT_TRUE((unsigned long)get_gcspr() > (unsigned long)self->stack);
+ ASSERT_TRUE((unsigned long)get_gcspr() <=
+ (unsigned long)self->stack + variant->stack_size);
+
+ /* Now try to recurse, we should fault doing this. */
+ ksft_print_msg("Recursing %d levels...\n", cap_index + 1);
+ gcs_recurse(cap_index + 1);
+ ksft_print_msg("...done\n");
+
+ /* Clean up properly to try to guard against spurious passes. */
+ gcsss1(orig_gcspr_el0);
+ pivot_gcspr_el0 = gcsss2();
+ ksft_print_msg("Pivoted back to GCSPR_EL0 0x%lx\n", get_gcspr());
+}
+
+FIXTURE(map_invalid_gcs)
+{
+};
+
+FIXTURE_VARIANT(map_invalid_gcs)
+{
+ size_t stack_size;
+};
+
+FIXTURE_SETUP(map_invalid_gcs)
+{
+}
+
+FIXTURE_TEARDOWN(map_invalid_gcs)
+{
+}
+
+/* GCS must be larger than 16 bytes */
+FIXTURE_VARIANT_ADD(map_invalid_gcs, too_small)
+{
+ .stack_size = 8,
+};
+
+/* GCS size must be 16 byte aligned */
+FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_1) { .stack_size = 1024 + 1 };
+FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_2) { .stack_size = 1024 + 2 };
+FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_3) { .stack_size = 1024 + 3 };
+FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_4) { .stack_size = 1024 + 4 };
+FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_5) { .stack_size = 1024 + 5 };
+FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_6) { .stack_size = 1024 + 6 };
+FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_7) { .stack_size = 1024 + 7 };
+
+TEST_F(map_invalid_gcs, do_map)
+{
+ void *stack;
+
+ stack = (void *)syscall(__NR_map_shadow_stack, 0,
+ variant->stack_size, 0);
+ ASSERT_TRUE(stack == MAP_FAILED);
+ if (stack != MAP_FAILED)
+ munmap(stack, variant->stack_size);
+}
+
+FIXTURE(invalid_mprotect)
+{
+ unsigned long *stack;
+ size_t stack_size;
+};
+
+FIXTURE_VARIANT(invalid_mprotect)
+{
+ unsigned long flags;
+};
+
+FIXTURE_SETUP(invalid_mprotect)
+{
+ self->stack_size = sysconf(_SC_PAGE_SIZE);
+ self->stack = (void *)syscall(__NR_map_shadow_stack, 0,
+ self->stack_size, 0);
+ ASSERT_FALSE(self->stack == MAP_FAILED);
+ ksft_print_msg("Allocated stack from %p-%p\n", self->stack,
+ (unsigned long)self->stack + self->stack_size);
+}
+
+FIXTURE_TEARDOWN(invalid_mprotect)
+{
+ int ret;
+
+ if (self->stack != MAP_FAILED) {
+ ret = munmap(self->stack, self->stack_size);
+ ASSERT_EQ(ret, 0);
+ }
+}
+
+FIXTURE_VARIANT_ADD(invalid_mprotect, exec)
+{
+ .flags = PROT_EXEC,
+};
+
+FIXTURE_VARIANT_ADD(invalid_mprotect, bti)
+{
+ .flags = PROT_BTI,
+};
+
+FIXTURE_VARIANT_ADD(invalid_mprotect, exec_bti)
+{
+ .flags = PROT_EXEC | PROT_BTI,
+};
+
+TEST_F(invalid_mprotect, do_map)
+{
+ int ret;
+
+ ret = mprotect(self->stack, self->stack_size, variant->flags);
+ ASSERT_EQ(ret, -1);
+}
+
+TEST_F(invalid_mprotect, do_map_read)
+{
+ int ret;
+
+ ret = mprotect(self->stack, self->stack_size,
+ variant->flags | PROT_READ);
+ ASSERT_EQ(ret, -1);
+}
+
+int main(int argc, char **argv)
+{
+ unsigned long gcs_mode;
+ int ret;
+
+ if (!(getauxval(AT_HWCAP2) & HWCAP2_GCS))
+ ksft_exit_skip("SKIP GCS not supported\n");
+
+ /*
+ * Force shadow stacks on, our tests *should* be fine with or
+ * without libc support and with or without this having ended
+ * up tagged for GCS and enabled by the dynamic linker. We
+ * can't use the libc prctl() function since we can't return
+ * from enabling the stack. Also lock GCS if not already
+ * locked so we can test behaviour when it's locked.
+ */
+ ret = my_syscall2(__NR_prctl, PR_GET_SHADOW_STACK_STATUS, &gcs_mode);
+ if (ret) {
+ ksft_print_msg("Failed to read GCS state: %d\n", ret);
+ return EXIT_FAILURE;
+ }
+
+ if (!(gcs_mode & PR_SHADOW_STACK_ENABLE)) {
+ gcs_mode = PR_SHADOW_STACK_ENABLE;
+ ret = my_syscall2(__NR_prctl, PR_SET_SHADOW_STACK_STATUS,
+ gcs_mode);
+ if (ret) {
+ ksft_print_msg("Failed to configure GCS: %d\n", ret);
+ return EXIT_FAILURE;
+ }
+ }
+
+ /* Avoid returning in case libc doesn't understand GCS */
+ exit(test_harness_run(argc, argv));
+}
--
2.39.2
In order to allow testing without full userspace support for shadow stacks
the clone3() selftests open code enabling them at runtime, hook up arm64
support.
Signed-off-by: Mark Brown <[email protected]>
---
tools/testing/selftests/clone3/clone3.c | 37 +++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/tools/testing/selftests/clone3/clone3.c b/tools/testing/selftests/clone3/clone3.c
index dbe52582573c..6114a33d6ec2 100644
--- a/tools/testing/selftests/clone3/clone3.c
+++ b/tools/testing/selftests/clone3/clone3.c
@@ -432,6 +432,43 @@ static inline void enable_shadow_stack(void)
#endif
+#ifdef __aarc64__
+#define PR_SET_SHADOW_STACK_STATUS 72
+# define PR_SHADOW_STACK_ENABLE (1UL << 0)
+
+#define my_syscall2(num, arg1, arg2) \
+({ \
+ register long _num __asm__ ("x8") = (num); \
+ register long _arg1 __asm__ ("x0") = (long)(arg1); \
+ register long _arg2 __asm__ ("x1") = (long)(arg2); \
+ register long _arg3 __asm__ ("x2") = 0; \
+ register long _arg4 __asm__ ("x3") = 0; \
+ register long _arg5 __asm__ ("x4") = 0; \
+ \
+ __asm__ volatile ( \
+ "svc #0\n" \
+ : "=r"(_arg1) \
+ : "r"(_arg1), "r"(_arg2), \
+ "r"(_arg3), "r"(_arg4), \
+ "r"(_arg5), "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+#define ENABLE_SHADOW_STACK
+static inline void enable_shadow_stack(void)
+{
+ int ret;
+
+ ret = my_syscall2(__NR_prctl, PR_SET_SHADOW_STACK_STATUS,
+ PR_SHADOW_STACK_ENABLE);
+ if (ret == 0)
+ shadow_stack_enabled = true;
+}
+
+#endif
+
#ifndef ENABLE_SHADOW_STACK
static void enable_shadow_stack(void)
{
--
2.39.2
Currently we ignore si_code unless the expected signal is a SIGSEGV, in
which case we enforce it being SEGV_ACCERR. Allow test cases to specify
exactly which si_code should be generated so we can validate this, and
test for other segfault codes.
Signed-off-by: Mark Brown <[email protected]>
---
.../testing/selftests/arm64/signal/test_signals.h | 4 +++
.../selftests/arm64/signal/test_signals_utils.c | 29 ++++++++++++++--------
2 files changed, 23 insertions(+), 10 deletions(-)
diff --git a/tools/testing/selftests/arm64/signal/test_signals.h b/tools/testing/selftests/arm64/signal/test_signals.h
index 7ada43688c02..ee75a2c25ce7 100644
--- a/tools/testing/selftests/arm64/signal/test_signals.h
+++ b/tools/testing/selftests/arm64/signal/test_signals.h
@@ -71,6 +71,10 @@ struct tdescr {
* Zero when no signal is expected on success
*/
int sig_ok;
+ /*
+ * expected si_code for sig_ok, or 0 to not check
+ */
+ int sig_ok_code;
/* signum expected on unsupported CPU features. */
int sig_unsupp;
/* a timeout in second for test completion */
diff --git a/tools/testing/selftests/arm64/signal/test_signals_utils.c b/tools/testing/selftests/arm64/signal/test_signals_utils.c
index 89ef95c1af0e..63deca32b0df 100644
--- a/tools/testing/selftests/arm64/signal/test_signals_utils.c
+++ b/tools/testing/selftests/arm64/signal/test_signals_utils.c
@@ -143,16 +143,25 @@ static bool handle_signal_ok(struct tdescr *td,
"current->token ZEROED...test is probably broken!\n");
abort();
}
- /*
- * Trying to narrow down the SEGV to the ones generated by Kernel itself
- * via arm64_notify_segfault(). This is a best-effort check anyway, and
- * the si_code check may need to change if this aspect of the kernel
- * ABI changes.
- */
- if (td->sig_ok == SIGSEGV && si->si_code != SEGV_ACCERR) {
- fprintf(stdout,
- "si_code != SEGV_ACCERR...test is probably broken!\n");
- abort();
+ if (td->sig_ok_code) {
+ if (si->si_code != td->sig_ok_code) {
+ fprintf(stdout, "si_code is %d not %d\n",
+ si->si_code, td->sig_ok_code);
+ abort();
+ }
+ } else {
+ /*
+ * Trying to narrow down the SEGV to the ones
+ * generated by Kernel itself via
+ * arm64_notify_segfault(). This is a best-effort
+ * check anyway, and the si_code check may need to
+ * change if this aspect of the kernel ABI changes.
+ */
+ if (td->sig_ok == SIGSEGV && si->si_code != SEGV_ACCERR) {
+ fprintf(stdout,
+ "si_code != SEGV_ACCERR...test is probably broken!\n");
+ abort();
+ }
}
td->pass = 1;
/*
--
2.39.2
Verify that we can lock individual GCS mode bits, that other modes
aren't affected and as a side effect also that every combination of
modes can be enabled.
Normally the inability to reenable GCS after disabling it would be an
issue with testing but fortunately the kselftest_harness runs each test
within a fork()ed child. This can be inconvenient for some kinds of
testing but here it means that each test is in a separate thread and
therefore won't be affected by other tests in the suite.
Once we get toolchains with support for enabling GCS by default we will
need to take care to not do that in the build system but there are no
such toolchains yet so it is not yet an issue.
Signed-off-by: Mark Brown <[email protected]>
---
tools/testing/selftests/arm64/gcs/.gitignore | 1 +
tools/testing/selftests/arm64/gcs/Makefile | 2 +-
tools/testing/selftests/arm64/gcs/gcs-locking.c | 200 ++++++++++++++++++++++++
3 files changed, 202 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/arm64/gcs/.gitignore b/tools/testing/selftests/arm64/gcs/.gitignore
index 5810c4a163d4..0c86f53f68ad 100644
--- a/tools/testing/selftests/arm64/gcs/.gitignore
+++ b/tools/testing/selftests/arm64/gcs/.gitignore
@@ -1,2 +1,3 @@
basic-gcs
libc-gcs
+gcs-locking
diff --git a/tools/testing/selftests/arm64/gcs/Makefile b/tools/testing/selftests/arm64/gcs/Makefile
index a8fdf21e9a47..2173d6275956 100644
--- a/tools/testing/selftests/arm64/gcs/Makefile
+++ b/tools/testing/selftests/arm64/gcs/Makefile
@@ -6,7 +6,7 @@
# nolibc.
#
-TEST_GEN_PROGS := basic-gcs libc-gcs
+TEST_GEN_PROGS := basic-gcs libc-gcs gcs-locking
LDLIBS+=-lpthread
diff --git a/tools/testing/selftests/arm64/gcs/gcs-locking.c b/tools/testing/selftests/arm64/gcs/gcs-locking.c
new file mode 100644
index 000000000000..f6a73254317e
--- /dev/null
+++ b/tools/testing/selftests/arm64/gcs/gcs-locking.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 ARM Limited.
+ *
+ * Tests for GCS mode locking. These tests rely on both having GCS
+ * unconfigured on entry and on the kselftest harness running each
+ * test in a fork()ed process which will have it's own mode.
+ */
+
+#include <limits.h>
+
+#include <sys/auxv.h>
+#include <sys/prctl.h>
+
+#include <asm/hwcap.h>
+
+#include "kselftest_harness.h"
+
+#include "gcs-util.h"
+
+#define my_syscall2(num, arg1, arg2) \
+({ \
+ register long _num __asm__ ("x8") = (num); \
+ register long _arg1 __asm__ ("x0") = (long)(arg1); \
+ register long _arg2 __asm__ ("x1") = (long)(arg2); \
+ register long _arg3 __asm__ ("x2") = 0; \
+ register long _arg4 __asm__ ("x3") = 0; \
+ register long _arg5 __asm__ ("x4") = 0; \
+ \
+ __asm__ volatile ( \
+ "svc #0\n" \
+ : "=r"(_arg1) \
+ : "r"(_arg1), "r"(_arg2), \
+ "r"(_arg3), "r"(_arg4), \
+ "r"(_arg5), "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+/* No mode bits are rejected for locking */
+TEST(lock_all_modes)
+{
+ int ret;
+
+ ret = prctl(PR_LOCK_SHADOW_STACK_STATUS, ULONG_MAX, 0, 0, 0);
+ ASSERT_EQ(ret, 0);
+}
+
+FIXTURE(valid_modes)
+{
+};
+
+FIXTURE_VARIANT(valid_modes)
+{
+ unsigned long mode;
+};
+
+FIXTURE_VARIANT_ADD(valid_modes, enable)
+{
+ .mode = PR_SHADOW_STACK_ENABLE,
+};
+
+FIXTURE_VARIANT_ADD(valid_modes, enable_write)
+{
+ .mode = PR_SHADOW_STACK_ENABLE | PR_SHADOW_STACK_WRITE,
+};
+
+FIXTURE_VARIANT_ADD(valid_modes, enable_push)
+{
+ .mode = PR_SHADOW_STACK_ENABLE | PR_SHADOW_STACK_PUSH,
+};
+
+FIXTURE_VARIANT_ADD(valid_modes, enable_write_push)
+{
+ .mode = PR_SHADOW_STACK_ENABLE | PR_SHADOW_STACK_WRITE |
+ PR_SHADOW_STACK_PUSH,
+};
+
+FIXTURE_SETUP(valid_modes)
+{
+}
+
+FIXTURE_TEARDOWN(valid_modes)
+{
+}
+
+/* We can set the mode at all */
+TEST_F(valid_modes, set)
+{
+ int ret;
+
+ ret = my_syscall2(__NR_prctl, PR_SET_SHADOW_STACK_STATUS,
+ variant->mode);
+ ASSERT_EQ(ret, 0);
+
+ _exit(0);
+}
+
+/* Enabling, locking then disabling is rejected */
+TEST_F(valid_modes, enable_lock_disable)
+{
+ unsigned long mode;
+ int ret;
+
+ ret = my_syscall2(__NR_prctl, PR_SET_SHADOW_STACK_STATUS,
+ variant->mode);
+ ASSERT_EQ(ret, 0);
+
+ ret = prctl(PR_GET_SHADOW_STACK_STATUS, &mode, 0, 0, 0);
+ ASSERT_EQ(ret, 0);
+ ASSERT_EQ(mode, variant->mode);
+
+ ret = prctl(PR_LOCK_SHADOW_STACK_STATUS, variant->mode, 0, 0, 0);
+ ASSERT_EQ(ret, 0);
+
+ ret = my_syscall2(__NR_prctl, PR_SET_SHADOW_STACK_STATUS, 0);
+ ASSERT_EQ(ret, -EBUSY);
+
+ _exit(0);
+}
+
+/* Locking then enabling is rejected */
+TEST_F(valid_modes, lock_enable)
+{
+ unsigned long mode;
+ int ret;
+
+ ret = prctl(PR_LOCK_SHADOW_STACK_STATUS, variant->mode, 0, 0, 0);
+ ASSERT_EQ(ret, 0);
+
+ ret = my_syscall2(__NR_prctl, PR_SET_SHADOW_STACK_STATUS,
+ variant->mode);
+ ASSERT_EQ(ret, -EBUSY);
+
+ ret = prctl(PR_GET_SHADOW_STACK_STATUS, &mode, 0, 0, 0);
+ ASSERT_EQ(ret, 0);
+ ASSERT_EQ(mode, 0);
+
+ _exit(0);
+}
+
+/* Locking then changing other modes is fine */
+TEST_F(valid_modes, lock_enable_disable_others)
+{
+ unsigned long mode;
+ int ret;
+
+ ret = my_syscall2(__NR_prctl, PR_SET_SHADOW_STACK_STATUS,
+ variant->mode);
+ ASSERT_EQ(ret, 0);
+
+ ret = prctl(PR_GET_SHADOW_STACK_STATUS, &mode, 0, 0, 0);
+ ASSERT_EQ(ret, 0);
+ ASSERT_EQ(mode, variant->mode);
+
+ ret = prctl(PR_LOCK_SHADOW_STACK_STATUS, variant->mode, 0, 0, 0);
+ ASSERT_EQ(ret, 0);
+
+ ret = my_syscall2(__NR_prctl, PR_SET_SHADOW_STACK_STATUS,
+ PR_SHADOW_STACK_ALL_MODES);
+ ASSERT_EQ(ret, 0);
+
+ ret = prctl(PR_GET_SHADOW_STACK_STATUS, &mode, 0, 0, 0);
+ ASSERT_EQ(ret, 0);
+ ASSERT_EQ(mode, PR_SHADOW_STACK_ALL_MODES);
+
+
+ ret = my_syscall2(__NR_prctl, PR_SET_SHADOW_STACK_STATUS,
+ variant->mode);
+ ASSERT_EQ(ret, 0);
+
+ ret = prctl(PR_GET_SHADOW_STACK_STATUS, &mode, 0, 0, 0);
+ ASSERT_EQ(ret, 0);
+ ASSERT_EQ(mode, variant->mode);
+
+ _exit(0);
+}
+
+int main(int argc, char **argv)
+{
+ unsigned long mode;
+ int ret;
+
+ if (!(getauxval(AT_HWCAP2) & HWCAP2_GCS))
+ ksft_exit_skip("SKIP GCS not supported\n");
+
+ ret = prctl(PR_GET_SHADOW_STACK_STATUS, &mode, 0, 0, 0);
+ if (ret) {
+ ksft_print_msg("Failed to read GCS state: %d\n", ret);
+ return EXIT_FAILURE;
+ }
+
+ if (mode & PR_SHADOW_STACK_ENABLE) {
+ ksft_print_msg("GCS was enabled, test unsupported\n");
+ return KSFT_SKIP;
+ }
+
+ return test_harness_run(argc, argv);
+}
--
2.39.2
This test program just covers the basic GCS ABI, covering aspects of the
ABI as standalone features without attempting to integrate things.
Signed-off-by: Mark Brown <[email protected]>
---
tools/testing/selftests/arm64/Makefile | 2 +-
tools/testing/selftests/arm64/gcs/.gitignore | 1 +
tools/testing/selftests/arm64/gcs/Makefile | 18 ++
tools/testing/selftests/arm64/gcs/basic-gcs.c | 428 ++++++++++++++++++++++++++
tools/testing/selftests/arm64/gcs/gcs-util.h | 90 ++++++
5 files changed, 538 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/arm64/Makefile b/tools/testing/selftests/arm64/Makefile
index 28b93cab8c0d..22029e60eff3 100644
--- a/tools/testing/selftests/arm64/Makefile
+++ b/tools/testing/selftests/arm64/Makefile
@@ -4,7 +4,7 @@
ARCH ?= $(shell uname -m 2>/dev/null || echo not)
ifneq (,$(filter $(ARCH),aarch64 arm64))
-ARM64_SUBTARGETS ?= tags signal pauth fp mte bti abi
+ARM64_SUBTARGETS ?= tags signal pauth fp mte bti abi gcs
else
ARM64_SUBTARGETS :=
endif
diff --git a/tools/testing/selftests/arm64/gcs/.gitignore b/tools/testing/selftests/arm64/gcs/.gitignore
new file mode 100644
index 000000000000..0e5e695ecba5
--- /dev/null
+++ b/tools/testing/selftests/arm64/gcs/.gitignore
@@ -0,0 +1 @@
+basic-gcs
diff --git a/tools/testing/selftests/arm64/gcs/Makefile b/tools/testing/selftests/arm64/gcs/Makefile
new file mode 100644
index 000000000000..61a30f483429
--- /dev/null
+++ b/tools/testing/selftests/arm64/gcs/Makefile
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2023 ARM Limited
+#
+# In order to avoid interaction with the toolchain and dynamic linker the
+# portions of these tests that interact with the GCS are implemented using
+# nolibc.
+#
+
+TEST_GEN_PROGS := basic-gcs
+
+include ../../lib.mk
+
+$(OUTPUT)/basic-gcs: basic-gcs.c
+ $(CC) -g -fno-asynchronous-unwind-tables -fno-ident -s -Os -nostdlib \
+ -static -include ../../../../include/nolibc/nolibc.h \
+ -I../../../../../usr/include \
+ -std=gnu99 -I../.. -g \
+ -ffreestanding -Wall $^ -o $@ -lgcc
diff --git a/tools/testing/selftests/arm64/gcs/basic-gcs.c b/tools/testing/selftests/arm64/gcs/basic-gcs.c
new file mode 100644
index 000000000000..3ef957e0065f
--- /dev/null
+++ b/tools/testing/selftests/arm64/gcs/basic-gcs.c
@@ -0,0 +1,428 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 ARM Limited.
+ */
+
+#include <limits.h>
+#include <stdbool.h>
+
+#include <linux/prctl.h>
+
+#include <sys/mman.h>
+#include <asm/mman.h>
+#include <linux/sched.h>
+
+#include "kselftest.h"
+#include "gcs-util.h"
+
+/* nolibc doesn't have sysconf(), just hard code the maximum */
+static size_t page_size = 65536;
+
+static __attribute__((noinline)) void valid_gcs_function(void)
+{
+ /* Do something the compiler can't optimise out */
+ my_syscall1(__NR_prctl, PR_SVE_GET_VL);
+}
+
+static inline int gcs_set_status(unsigned long mode)
+{
+ bool enabling = mode & PR_SHADOW_STACK_ENABLE;
+ int ret;
+ unsigned long new_mode;
+
+ /*
+ * The prctl takes 1 argument but we need to ensure that the
+ * other 3 values passed in registers to the syscall are zero
+ * since the kernel validates them.
+ */
+ ret = my_syscall5(__NR_prctl, PR_SET_SHADOW_STACK_STATUS, mode,
+ 0, 0, 0);
+
+ if (ret == 0) {
+ ret = my_syscall5(__NR_prctl, PR_GET_SHADOW_STACK_STATUS,
+ &new_mode, 0, 0, 0);
+ if (ret == 0) {
+ if (new_mode != mode) {
+ ksft_print_msg("Mode set to %x not %x\n",
+ new_mode, mode);
+ ret = -EINVAL;
+ }
+ } else {
+ ksft_print_msg("Failed to validate mode: %d\n", ret);
+ }
+
+ if (enabling != chkfeat_gcs()) {
+ ksft_print_msg("%senabled by prctl but %senabled in CHKFEAT\n",
+ enabling ? "" : "not ",
+ chkfeat_gcs() ? "" : "not ");
+ ret = -EINVAL;
+ }
+ }
+
+ return ret;
+}
+
+/* Try to read the status */
+static bool read_status(void)
+{
+ unsigned long state;
+ int ret;
+
+ ret = my_syscall5(__NR_prctl, PR_GET_SHADOW_STACK_STATUS,
+ &state, 0, 0, 0);
+ if (ret != 0) {
+ ksft_print_msg("Failed to read state: %d\n", ret);
+ return false;
+ }
+
+ return state & PR_SHADOW_STACK_ENABLE;
+}
+
+/* Just a straight enable */
+static bool base_enable(void)
+{
+ int ret;
+
+ ret = gcs_set_status(PR_SHADOW_STACK_ENABLE);
+ if (ret) {
+ ksft_print_msg("PR_SHADOW_STACK_ENABLE failed %d\n", ret);
+ return false;
+ }
+
+ return true;
+}
+
+/* Check we can read GCSPR_EL0 when GCS is enabled */
+static bool read_gcspr_el0(void)
+{
+ unsigned long *gcspr_el0;
+
+ ksft_print_msg("GET GCSPR\n");
+ gcspr_el0 = get_gcspr();
+ ksft_print_msg("GCSPR_EL0 is %p\n", gcspr_el0);
+
+ return true;
+}
+
+/* Also allow writes to stack */
+static bool enable_writeable(void)
+{
+ int ret;
+
+ ret = gcs_set_status(PR_SHADOW_STACK_ENABLE | PR_SHADOW_STACK_WRITE);
+ if (ret) {
+ ksft_print_msg("PR_SHADOW_STACK_ENABLE writeable failed: %d\n", ret);
+ return false;
+ }
+
+ ret = gcs_set_status(PR_SHADOW_STACK_ENABLE);
+ if (ret) {
+ ksft_print_msg("failed to restore plain enable %d\n", ret);
+ return false;
+ }
+
+ return true;
+}
+
+/* Also allow writes to stack */
+static bool enable_push_pop(void)
+{
+ int ret;
+
+ ret = gcs_set_status(PR_SHADOW_STACK_ENABLE | PR_SHADOW_STACK_PUSH);
+ if (ret) {
+ ksft_print_msg("PR_SHADOW_STACK_ENABLE with push failed: %d\n",
+ ret);
+ return false;
+ }
+
+ ret = gcs_set_status(PR_SHADOW_STACK_ENABLE);
+ if (ret) {
+ ksft_print_msg("failed to restore plain enable %d\n", ret);
+ return false;
+ }
+
+ return true;
+}
+
+/* Enable GCS and allow everything */
+static bool enable_all(void)
+{
+ int ret;
+
+ ret = gcs_set_status(PR_SHADOW_STACK_ENABLE | PR_SHADOW_STACK_PUSH |
+ PR_SHADOW_STACK_WRITE);
+ if (ret) {
+ ksft_print_msg("PR_SHADOW_STACK_ENABLE with everything failed: %d\n",
+ ret);
+ return false;
+ }
+
+ ret = gcs_set_status(PR_SHADOW_STACK_ENABLE);
+ if (ret) {
+ ksft_print_msg("failed to restore plain enable %d\n", ret);
+ return false;
+ }
+
+ return true;
+}
+
+static bool enable_invalid(void)
+{
+ int ret = gcs_set_status(ULONG_MAX);
+ if (ret == 0) {
+ ksft_print_msg("GCS_SET_STATUS %lx succeeded\n", ULONG_MAX);
+ return false;
+ }
+
+ return true;
+}
+
+/* Map a GCS */
+static bool map_guarded_stack(void)
+{
+ int ret;
+ uint64_t *buf;
+ uint64_t expected_cap;
+ int elem;
+ bool pass = true;
+
+ buf = (void *)my_syscall3(__NR_map_shadow_stack, 0, page_size,
+ SHADOW_STACK_SET_MARKER |
+ SHADOW_STACK_SET_TOKEN);
+ if (buf == MAP_FAILED) {
+ ksft_print_msg("Failed to map %d byte GCS: %d\n",
+ page_size, errno);
+ return false;
+ }
+ ksft_print_msg("Mapped GCS at %p-%p\n", buf,
+ (uint64_t)buf + page_size);
+
+ /* The top of the newly allocated region should be 0 */
+ elem = (page_size / sizeof(uint64_t)) - 1;
+ if (buf[elem]) {
+ ksft_print_msg("Last entry is 0x%lx not 0x0\n", buf[elem]);
+ pass = false;
+ }
+
+ /* Then a valid cap token */
+ elem--;
+ expected_cap = ((uint64_t)buf + page_size - 16);
+ expected_cap &= GCS_CAP_ADDR_MASK;
+ expected_cap |= GCS_CAP_VALID_TOKEN;
+ if (buf[elem] != expected_cap) {
+ ksft_print_msg("Cap entry is 0x%lx not 0x%lx\n",
+ buf[elem], expected_cap);
+ pass = false;
+ }
+ ksft_print_msg("cap token is 0x%lx\n", buf[elem]);
+
+ /* The rest should be zeros */
+ for (elem = 0; elem < page_size / sizeof(uint64_t) - 2; elem++) {
+ if (!buf[elem])
+ continue;
+ ksft_print_msg("GCS slot %d is 0x%lx not 0x0\n",
+ elem, buf[elem]);
+ pass = false;
+ }
+
+ ret = munmap(buf, page_size);
+ if (ret != 0) {
+ ksft_print_msg("Failed to unmap %d byte GCS: %d\n",
+ page_size, errno);
+ pass = false;
+ }
+
+ return pass;
+}
+
+/* A fork()ed process can run */
+static bool test_fork(void)
+{
+ unsigned long child_mode;
+ int ret, status;
+ pid_t pid;
+ bool pass = true;
+
+ pid = fork();
+ if (pid == -1) {
+ ksft_print_msg("fork() failed: %d\n", errno);
+ pass = false;
+ goto out;
+ }
+ if (pid == 0) {
+ /* In child, make sure we can call a function, read
+ * the GCS pointer and status and then exit */
+ valid_gcs_function();
+ get_gcspr();
+
+ ret = my_syscall5(__NR_prctl, PR_GET_SHADOW_STACK_STATUS,
+ &child_mode, 0, 0, 0);
+ if (ret == 0 && !(child_mode & PR_SHADOW_STACK_ENABLE)) {
+ ksft_print_msg("GCS not enabled in child\n");
+ ret = -EINVAL;
+ }
+
+ exit(ret);
+ }
+
+ /*
+ * In parent, check we can still do function calls then block
+ * for the child.
+ */
+ valid_gcs_function();
+
+ ksft_print_msg("Waiting for child %d\n", pid);
+
+ ret = waitpid(pid, &status, 0);
+ if (ret == -1) {
+ ksft_print_msg("Failed to wait for child: %d\n",
+ errno);
+ return false;
+ }
+
+ if (!WIFEXITED(status)) {
+ ksft_print_msg("Child exited due to signal %d\n",
+ WTERMSIG(status));
+ pass = false;
+ } else {
+ if (WEXITSTATUS(status)) {
+ ksft_print_msg("Child exited with status %d\n",
+ WEXITSTATUS(status));
+ pass = false;
+ }
+ }
+
+out:
+
+ return pass;
+}
+
+/* Check that we can explicitly specify a GCS via clone3() */
+static bool test_clone3(void)
+{
+ struct clone_args args;
+ unsigned long child_mode;
+ pid_t pid = -1;
+ int status, ret;
+ bool pass;
+
+ memset(&args, 0, sizeof(args));
+ args.flags = CLONE_VM;
+ args.shadow_stack_size = page_size;
+
+ pid = my_syscall2(__NR_clone3, &args, sizeof(args));
+ if (pid < 0) {
+ ksft_print_msg("clone3() failed: %d\n", errno);
+ pass = false;
+ goto out;
+ }
+
+ /* In child? */
+ if (pid == 0) {
+ /* Do we have GCS enabled? */
+ ret = my_syscall5(__NR_prctl, PR_GET_SHADOW_STACK_STATUS,
+ &child_mode, 0, 0, 0);
+ if (ret != 0) {
+ ksft_print_msg("PR_GET_SHADOW_STACK_STATUS failed: %d\n",
+ ret);
+ exit(EXIT_FAILURE);
+ }
+
+ if (!(child_mode & PR_SHADOW_STACK_ENABLE)) {
+ ksft_print_msg("GCS not enabled in child\n");
+ exit(EXIT_FAILURE);
+ }
+
+ ksft_print_msg("GCS enabled in child\n");
+
+ /* We've probably already called a function but make sure */
+ valid_gcs_function();
+
+ exit(EXIT_SUCCESS);
+ }
+
+ if (waitpid(-1, &status, __WALL) < 0) {
+ ksft_print_msg("waitpid() failed %d\n", errno);
+ pass = false;
+ goto out;
+ }
+ if (WIFEXITED(status)) {
+ if (WEXITSTATUS(status) == EXIT_SUCCESS) {
+ pass = true;
+ } else {
+ ksft_print_msg("Child returned status %d\n",
+ WEXITSTATUS(status));
+ pass = false;
+ }
+ } else if (WIFSIGNALED(status)) {
+ ksft_print_msg("Child exited due to signal %d\n",
+ WTERMSIG(status));
+ pass = false;
+ } else {
+ ksft_print_msg("Child exited uncleanly\n");
+ pass = false;
+ }
+
+out:
+ return pass;
+}
+
+typedef bool (*gcs_test)(void);
+
+static struct {
+ char *name;
+ gcs_test test;
+ bool needs_enable;
+} tests[] = {
+ { "read_status", read_status },
+ { "base_enable", base_enable, true },
+ { "read_gcspr_el0", read_gcspr_el0 },
+ { "enable_writeable", enable_writeable, true },
+ { "enable_push_pop", enable_push_pop, true },
+ { "enable_all", enable_all, true },
+ { "enable_invalid", enable_invalid, true },
+ { "map_guarded_stack", map_guarded_stack },
+ { "fork", test_fork },
+ { "clone3", test_clone3 },
+};
+
+int main(void)
+{
+ int i, ret;
+ unsigned long gcs_mode;
+
+ ksft_print_header();
+
+ /*
+ * We don't have getauxval() with nolibc so treat a failure to
+ * read GCS state as a lack of support and skip.
+ */
+ ret = my_syscall5(__NR_prctl, PR_GET_SHADOW_STACK_STATUS,
+ &gcs_mode, 0, 0, 0);
+ if (ret != 0)
+ ksft_exit_skip("Failed to read GCS state: %d\n", ret);
+
+ if (!(gcs_mode & PR_SHADOW_STACK_ENABLE)) {
+ gcs_mode = PR_SHADOW_STACK_ENABLE;
+ ret = my_syscall5(__NR_prctl, PR_SET_SHADOW_STACK_STATUS,
+ gcs_mode, 0, 0, 0);
+ if (ret != 0)
+ ksft_exit_fail_msg("Failed to enable GCS: %d\n", ret);
+ }
+
+ ksft_set_plan(ARRAY_SIZE(tests));
+
+ for (i = 0; i < ARRAY_SIZE(tests); i++) {
+ ksft_test_result((*tests[i].test)(), "%s\n", tests[i].name);
+ }
+
+ /* One last test: disable GCS, we can do this one time */
+ my_syscall5(__NR_prctl, PR_SET_SHADOW_STACK_STATUS, 0, 0, 0, 0);
+ if (ret != 0)
+ ksft_print_msg("Failed to disable GCS: %d\n", ret);
+
+ ksft_finished();
+
+ return 0;
+}
diff --git a/tools/testing/selftests/arm64/gcs/gcs-util.h b/tools/testing/selftests/arm64/gcs/gcs-util.h
new file mode 100644
index 000000000000..b37801c95604
--- /dev/null
+++ b/tools/testing/selftests/arm64/gcs/gcs-util.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2023 ARM Limited.
+ */
+
+#ifndef GCS_UTIL_H
+#define GCS_UTIL_H
+
+#include <stdbool.h>
+
+#ifndef __NR_map_shadow_stack
+#define __NR_map_shadow_stack 453
+#endif
+
+#ifndef __NR_prctl
+#define __NR_prctl 167
+#endif
+
+/* Shadow Stack/Guarded Control Stack interface */
+#define PR_GET_SHADOW_STACK_STATUS 71
+#define PR_SET_SHADOW_STACK_STATUS 72
+#define PR_LOCK_SHADOW_STACK_STATUS 73
+
+# define PR_SHADOW_STACK_ENABLE (1UL << 0)
+# define PR_SHADOW_STACK_WRITE (1UL << 1)
+# define PR_SHADOW_STACK_PUSH (1UL << 2)
+
+#define PR_SHADOW_STACK_ALL_MODES \
+ PR_SHADOW_STACK_ENABLE | PR_SHADOW_STACK_WRITE | PR_SHADOW_STACK_PUSH
+
+#define SHADOW_STACK_SET_TOKEN (1ULL << 0) /* Set up a restore token in the shadow stack */
+#define SHADOW_STACK_SET_MARKER (1ULL << 1) /* Set up a top of stack merker in the shadow stack */
+
+#define GCS_CAP_ADDR_MASK (0xfffffffffffff000UL)
+#define GCS_CAP_TOKEN_MASK (0x0000000000000fffUL)
+#define GCS_CAP_VALID_TOKEN 1
+#define GCS_CAP_IN_PROGRESS_TOKEN 5
+
+#define GCS_CAP(x) (((unsigned long)(x) & GCS_CAP_ADDR_MASK) | \
+ GCS_CAP_VALID_TOKEN)
+
+static inline unsigned long *get_gcspr(void)
+{
+ unsigned long *gcspr;
+
+ asm volatile(
+ "mrs %0, S3_3_C2_C5_1"
+ : "=r" (gcspr)
+ :
+ : "cc");
+
+ return gcspr;
+}
+
+static inline void __attribute__((always_inline)) gcsss1(unsigned long *Xt)
+{
+ asm volatile (
+ "sys #3, C7, C7, #2, %0\n"
+ :
+ : "rZ" (Xt)
+ : "memory");
+}
+
+static inline unsigned long __attribute__((always_inline)) *gcsss2(void)
+{
+ unsigned long *Xt;
+
+ asm volatile(
+ "SYSL %0, #3, C7, C7, #3\n"
+ : "=r" (Xt)
+ :
+ : "memory");
+
+ return Xt;
+}
+
+static inline bool chkfeat_gcs(void)
+{
+ register long val __asm__ ("x16") = 1;
+
+ /* CHKFEAT x16 */
+ asm volatile(
+ "hint #0x28\n"
+ : "=r" (val)
+ : "r" (val));
+
+ return val != 1;
+}
+
+#endif
--
2.39.2
While it's a bit off topic for them the floating point stress tests do give
us some coverage of context thrashing cases, and also of active signal
delivery separate to the relatively complicated framework in the actual
signals tests. Have the tests enable GCS on startup, ignoring failures so
they continue to work as before on systems without GCS.
Signed-off-by: Mark Brown <[email protected]>
---
tools/testing/selftests/arm64/fp/assembler.h | 15 +++++++++++++++
tools/testing/selftests/arm64/fp/fpsimd-test.S | 2 ++
tools/testing/selftests/arm64/fp/sve-test.S | 2 ++
tools/testing/selftests/arm64/fp/za-test.S | 2 ++
tools/testing/selftests/arm64/fp/zt-test.S | 2 ++
5 files changed, 23 insertions(+)
diff --git a/tools/testing/selftests/arm64/fp/assembler.h b/tools/testing/selftests/arm64/fp/assembler.h
index 9b38a0da407d..7012f9f796de 100644
--- a/tools/testing/selftests/arm64/fp/assembler.h
+++ b/tools/testing/selftests/arm64/fp/assembler.h
@@ -65,4 +65,19 @@ endfunction
bl puts
.endm
+#define PR_SET_SHADOW_STACK_STATUS 72
+# define PR_SHADOW_STACK_ENABLE (1UL << 0)
+
+.macro enable_gcs
+ // Run with GCS
+ mov x0, PR_SET_SHADOW_STACK_STATUS
+ mov x1, PR_SHADOW_STACK_ENABLE
+ mov x2, xzr
+ mov x3, xzr
+ mov x4, xzr
+ mov x5, xzr
+ mov x8, #__NR_prctl
+ svc #0
+.endm
+
#endif /* ! ASSEMBLER_H */
diff --git a/tools/testing/selftests/arm64/fp/fpsimd-test.S b/tools/testing/selftests/arm64/fp/fpsimd-test.S
index 8b960d01ed2e..b16fb7f42e3e 100644
--- a/tools/testing/selftests/arm64/fp/fpsimd-test.S
+++ b/tools/testing/selftests/arm64/fp/fpsimd-test.S
@@ -215,6 +215,8 @@ endfunction
// Main program entry point
.globl _start
function _start
+ enable_gcs
+
mov x23, #0 // signal count
mov w0, #SIGINT
diff --git a/tools/testing/selftests/arm64/fp/sve-test.S b/tools/testing/selftests/arm64/fp/sve-test.S
index 547d077e3517..e29ab7c4e824 100644
--- a/tools/testing/selftests/arm64/fp/sve-test.S
+++ b/tools/testing/selftests/arm64/fp/sve-test.S
@@ -378,6 +378,8 @@ endfunction
// Main program entry point
.globl _start
function _start
+ enable_gcs
+
mov x23, #0 // Irritation signal count
mov w0, #SIGINT
diff --git a/tools/testing/selftests/arm64/fp/za-test.S b/tools/testing/selftests/arm64/fp/za-test.S
index 9dcd70911397..f789694fa3ea 100644
--- a/tools/testing/selftests/arm64/fp/za-test.S
+++ b/tools/testing/selftests/arm64/fp/za-test.S
@@ -231,6 +231,8 @@ endfunction
// Main program entry point
.globl _start
function _start
+ enable_gcs
+
mov x23, #0 // signal count
mov w0, #SIGINT
diff --git a/tools/testing/selftests/arm64/fp/zt-test.S b/tools/testing/selftests/arm64/fp/zt-test.S
index d63286397638..ea5e55310705 100644
--- a/tools/testing/selftests/arm64/fp/zt-test.S
+++ b/tools/testing/selftests/arm64/fp/zt-test.S
@@ -200,6 +200,8 @@ endfunction
// Main program entry point
.globl _start
function _start
+ enable_gcs
+
mov x23, #0 // signal count
mov w0, #SIGINT
--
2.39.2
Hello,
Mark Brown <[email protected]> writes:
> diff --git a/arch/arm64/mm/mmap.c b/arch/arm64/mm/mmap.c
> index 645fe60d000f..605d4e6edc1d 100644
> --- a/arch/arm64/mm/mmap.c
> +++ b/arch/arm64/mm/mmap.c
> @@ -79,9 +79,20 @@ arch_initcall(adjust_protection_map);
>
> pgprot_t vm_get_page_prot(unsigned long vm_flags)
> {
> - pteval_t prot = pgprot_val(protection_map[vm_flags &
> + pteval_t prot;
> +
> + /* If this is a GCS then only interpret VM_WRITE. */
> + if (system_supports_gcs() && (vm_flags & VM_SHADOW_STACK)) {
> + if (vm_flags & VM_WRITE)
> + prot = _PAGE_GCS;
> + else
> + prot = _PAGE_GCS_RO;
> + } else {
> + prot = pgprot_val(protection_map[vm_flags &
> (VM_READ|VM_WRITE|VM_EXEC|VM_SHARED)]);
> + }
>
> + /* VM_ARM64_BTI on a GCS is rejected in arch_valdiate_flags() */
s/valdiate/validate/
> if (vm_flags & VM_ARM64_BTI)
> prot |= PTE_GP;
--
Thiago
Mark Brown <[email protected]> writes:
> When a new thread is created by a thread with GCS enabled the GCS needs
> to be specified along with the regular stack. clone3() has been
> extended to support this case, allowing userspace to explicitly request
> the size for the GCS to be created, but plain clone() is not extensible
> and existing clone3() users will not specify a size.
>
> For compatibility with these cases and also x86 (which did not initially
> implement clone3() support for shadow stacks) if no GCS is specified we
> will allocate one thread so when a thread is created which has GCS
~~~~~~
This "thread" seems extraneous in the sentence. Remove it?
> enabled allocate one for it. We follow the extensively discussed x86
> implementation and allocate min(RLIMIT_STACK, 4G). Since the GCS only
Isn't it min(RLIMIT_STACK/2, 2G)?
> stores the call stack and not any variables this should be more than
> sufficient for most applications.
>
> GCSs allocated via this mechanism then it will be freed when the thread
> exits.
I'm not sure I parsed this sentence correctly. Is it missing an "If" at
the beginning?
--
Thiago
Mark Brown <[email protected]> writes:
> Implement the architecture neutral prtctl() interface for setting the
> shadow stack status, this supports setting and reading the current GCS
> configuration for the current thread.
>
> Userspace can enable basic GCS functionality and additionally also
> support for GCS pushes and arbatrary GCS stores. It is expected that
s/arbatrary/arbitrary/
> this prctl() will be called very early in application startup, for
> example by the dynamic linker, and not subsequently adjusted during
> normal operation. Users should carefully note that after enabling GCS
> for a thread GCS will become active with no call stack so it is not
> normally possible to return from the function that invoked the prctl().
--
Thiago
Mark Brown <[email protected]> writes:
> Since the x86 code has not yet been rebased to v6.5-rc1 this includes
> the architecture neutral parts of Rick Edgecmbe's "x86/shstk: Introduce
> map_shadow_stack syscall".
This paragraph can be dropped now.
--
Thiago
Mark Brown <[email protected]> writes:
> +static bool gcs_signal_cap_valid(u64 addr, u64 val)
> +{
> + /*
> + * The top bit should be set, this is an invalid address for
> + * EL0 and will only be set for caps created by signals.
> + */
> + if (!(val & GCS_SIGNAL_CAP_FLAG))
> + return false;
> +
> + /* The rest should be a standard architectural cap token. */
> + val &= ~GCS_SIGNAL_CAP_FLAG;
> +
> + /* The cap must have the low bits set to a token value */
> + if (GCS_CAP_TOKEN(val) != 0)
> + return false;
I found the comment above a little confusing, since the if condition
actually checks that low bits aren't set at all. Perhaps reword to
something like "The token value of a signal cap must be 0"?
> +
> + /* The cap must store the VA the cap was stored at */
> + if (GCS_CAP_ADDR(addr) != GCS_CAP_ADDR(val))
> + return false;
> +
> + return true;
> +}
> +#endif
> +
> /*
> * Do a signal return; undo the signal stack. These are aligned to 128-bit.
> */
> @@ -815,6 +847,45 @@ static int restore_sigframe(struct pt_regs *regs,
> return err;
> }
>
> +#ifdef CONFIG_ARM64_GCS
> +static int gcs_restore_signal(void)
> +{
> + u64 gcspr_el0, cap;
> + int ret;
> +
> + if (!system_supports_gcs())
> + return 0;
> +
> + if (!(current->thread.gcs_el0_mode & PR_SHADOW_STACK_ENABLE))
> + return 0;
> +
> + gcspr_el0 = read_sysreg_s(SYS_GCSPR_EL0);
> +
> + /*
> + * GCSPR_EL0 should be pointing at a capped GCS, read the cap...
> + */
> + gcsb_dsync();
> + ret = copy_from_user(&cap, (__user void*)gcspr_el0, sizeof(cap));
> + if (ret)
> + return -EFAULT;
> +
> + /*
> + * ...then check that the cap is the actual GCS before
> + * restoring it.
> + */
> + if (!gcs_signal_cap_valid(gcspr_el0, cap))
> + return -EINVAL;
> +
> + current->thread.gcspr_el0 = gcspr_el0 + sizeof(cap);
> + write_sysreg_s(current->thread.gcspr_el0, SYS_GCSPR_EL0);
At this point, there's an inactive but valid cap just below the GCS.
Over time, as different signals are received when the GCSPR is pointing
at different locations of the stack, there could be a number of valid
inactive caps available for misuse.
I'm still not proficient enough in GCS to know how exactly this could be
abused (e.g., somehow writing the desired return location right above
one of these inactive caps and arranging for GCSPR to point to the cap
before returning from a signal) but to be safe or paranoid, perhaps zero
the location of the cap before returning?
> +
> + return 0;
> +}
> +
> +#else
> +static int gcs_restore_signal(void) { return 0; }
> +#endif
> +
> SYSCALL_DEFINE0(rt_sigreturn)
> {
> struct pt_regs *regs = current_pt_regs();
> @@ -841,6 +912,9 @@ SYSCALL_DEFINE0(rt_sigreturn)
> if (restore_altstack(&frame->uc.uc_stack))
> goto badframe;
>
> + if (gcs_restore_signal())
> + goto badframe;
> +
> return regs->regs[0];
>
> badframe:
> @@ -1071,7 +1145,50 @@ static int get_sigframe(struct rt_sigframe_user_layout *user,
> return 0;
> }
>
> -static void setup_return(struct pt_regs *regs, struct k_sigaction *ka,
> +#ifdef CONFIG_ARM64_GCS
> +
> +static int gcs_signal_entry(__sigrestore_t sigtramp, struct ksignal *ksig)
The ksig argument is unused, so it can be removed.
> +{
> + unsigned long __user *gcspr_el0;
> + int ret = 0;
> +
> + if (!system_supports_gcs())
> + return 0;
> +
> + if (!task_gcs_el0_enabled(current))
> + return 0;
> +
> + /*
> + * We are entering a signal handler, current register state is
> + * active.
> + */
> + gcspr_el0 = (unsigned long __user *)read_sysreg_s(SYS_GCSPR_EL0);
> +
> + /*
> + * Push a cap and the GCS entry for the trampoline onto the GCS.
> + */
> + put_user_gcs((unsigned long)sigtramp, gcspr_el0 - 2, &ret);
> + put_user_gcs(GCS_SIGNAL_CAP(gcspr_el0 - 1), gcspr_el0 - 1, &ret);
> + if (ret != 0)
> + return ret;
> +
> + gcsb_dsync();
> +
> + gcspr_el0 -= 2;
> + write_sysreg_s((unsigned long)gcspr_el0, SYS_GCSPR_EL0);
> +
> + return 0;
> +}
> +#else
> +
> +static int gcs_signal_entry(__sigrestore_t sigtramp, struct ksignal *ksig)
> +{
> + return 0;
> +}
> +
> +#endif
> +
> +static int setup_return(struct pt_regs *regs, struct ksignal *ksig,
> struct rt_sigframe_user_layout *user, int usig)
Since the ksig argument isn't used by gcs_signal_entry(), setup_return()
can keep the ka argument and the changes below from ka to ksic->ka are
unnecessary.
> {
> __sigrestore_t sigtramp;
> @@ -1079,7 +1196,7 @@ static void setup_return(struct pt_regs *regs, struct k_sigaction *ka,
> regs->regs[0] = usig;
> regs->sp = (unsigned long)user->sigframe;
> regs->regs[29] = (unsigned long)&user->next_frame->fp;
> - regs->pc = (unsigned long)ka->sa.sa_handler;
> + regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
>
> /*
> * Signal delivery is a (wacky) indirect function call in
> @@ -1119,12 +1236,14 @@ static void setup_return(struct pt_regs *regs, struct k_sigaction *ka,
> sme_smstop();
> }
>
> - if (ka->sa.sa_flags & SA_RESTORER)
> - sigtramp = ka->sa.sa_restorer;
> + if (ksig->ka.sa.sa_flags & SA_RESTORER)
> + sigtramp = ksig->ka.sa.sa_restorer;
> else
> sigtramp = VDSO_SYMBOL(current->mm->context.vdso, sigtramp);
>
> regs->regs[30] = (unsigned long)sigtramp;
> +
> + return gcs_signal_entry(sigtramp, ksig);
> }
>
> static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
> @@ -1147,7 +1266,7 @@ static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
> err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
> err |= setup_sigframe(&user, regs, set);
> if (err == 0) {
> - setup_return(regs, &ksig->ka, &user, usig);
> + err = setup_return(regs, ksig, &user, usig);
> if (ksig->ka.sa.sa_flags & SA_SIGINFO) {
> err |= copy_siginfo_to_user(&frame->info, &ksig->info);
> regs->regs[1] = (unsigned long)&frame->info;
> diff --git a/arch/arm64/mm/gcs.c b/arch/arm64/mm/gcs.c
> index 02f8f6046c10..6f51429c5a46 100644
> --- a/arch/arm64/mm/gcs.c
> +++ b/arch/arm64/mm/gcs.c
> @@ -6,6 +6,7 @@
> #include <linux/types.h>
>
> #include <asm/cpufeature.h>
> +#include <asm/gcs.h>
> #include <asm/page.h>
This is #include isn't needed by this patch. Probably better as part of
another one.
--
Thiago
On Sat, Dec 09, 2023 at 12:15:22AM -0300, Thiago Jung Bauermann wrote:
> Mark Brown <[email protected]> writes:
> > + /* The cap must have the low bits set to a token value */
> > + if (GCS_CAP_TOKEN(val) != 0)
> > + return false;
> I found the comment above a little confusing, since the if condition
> actually checks that low bits aren't set at all. Perhaps reword to
> something like "The token value of a signal cap must be 0"?
Right, that's bitrot from the previous token format.
> I'm still not proficient enough in GCS to know how exactly this could be
> abused (e.g., somehow writing the desired return location right above
> one of these inactive caps and arranging for GCSPR to point to the cap
> before returning from a signal) but to be safe or paranoid, perhaps zero
> the location of the cap before returning?
Right, ideally we'd be doing a compare and exchange here to substitute
in a zero.
Mark Brown <[email protected]> writes:
> +static int preserve_gcs_context(struct gcs_context __user *ctx)
> +{
> + int err = 0;
> + u64 gcspr;
> +
> + /*
> + * We will add a cap token to the frame, include it in the
> + * GCSPR_EL0 we report to support stack switching via
> + * sigreturn.
> + */
> + gcs_preserve_current_state();
> + gcspr = current->thread.gcspr_el0;
> + if (task_gcs_el0_enabled(current))
> + gcspr -= 8;
> +
> + __put_user_error(GCS_MAGIC, &ctx->head.magic, err);
> + __put_user_error(sizeof(*ctx), &ctx->head.size, err);
> + __put_user_error(gcspr, &ctx->gcspr, err);
> + __put_user_error(current->thread.gcs_el0_mode,
> + &ctx->features_enabled, err);
Other preserve_<foo>_context() functions zero the reserved fields in
ctx. I suggest doing the same here. It helps with backward
compatibility.
> +
> + return err;
> +}
--
Thiago
Mark Brown <[email protected]> writes:
> Provide a new register type NT_ARM_GCS reporting the current GCS mode
> and pointer for EL0. Due to the interactions with allocation and
> deallocation of Guarded Control Stacks we do not permit any changes to
> the GCS mode via ptrace, only GCSPR_EL0 may be changed.
The code allows disabling GCS. Is that unintended?
> Signed-off-by: Mark Brown <[email protected]>
> ---
> arch/arm64/include/uapi/asm/ptrace.h | 8 +++++
> arch/arm64/kernel/ptrace.c | 59 ++++++++++++++++++++++++++++++++++++
> include/uapi/linux/elf.h | 1 +
> 3 files changed, 68 insertions(+)
>
> diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h
> index 7fa2f7036aa7..0f39ba4f3efd 100644
> --- a/arch/arm64/include/uapi/asm/ptrace.h
> +++ b/arch/arm64/include/uapi/asm/ptrace.h
> @@ -324,6 +324,14 @@ struct user_za_header {
> #define ZA_PT_SIZE(vq) \
> (ZA_PT_ZA_OFFSET + ZA_PT_ZA_SIZE(vq))
>
> +/* GCS state (NT_ARM_GCS) */
> +
> +struct user_gcs {
> + __u64 features_enabled;
> + __u64 features_locked;
> + __u64 gcspr_el0;
> +};
If there's a reserved field in sigframe's gcs_context, isn't it worth it
to have a reserved field here as well?
> +
> #endif /* __ASSEMBLY__ */
>
> #endif /* _UAPI__ASM_PTRACE_H */
> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
> index 20d7ef82de90..f15b8e33561e 100644
> --- a/arch/arm64/kernel/ptrace.c
> +++ b/arch/arm64/kernel/ptrace.c
> @@ -33,6 +33,7 @@
> #include <asm/cpufeature.h>
> #include <asm/debug-monitors.h>
> #include <asm/fpsimd.h>
> +#include <asm/gcs.h>
> #include <asm/mte.h>
> #include <asm/pointer_auth.h>
> #include <asm/stacktrace.h>
> @@ -1409,6 +1410,51 @@ static int tagged_addr_ctrl_set(struct task_struct *target, const struct
> }
> #endif
>
> +#ifdef CONFIG_ARM64_GCS
> +static int gcs_get(struct task_struct *target,
> + const struct user_regset *regset,
> + struct membuf to)
> +{
> + struct user_gcs user_gcs;
> +
> + if (target == current)
> + gcs_preserve_current_state();
> +
> + user_gcs.features_enabled = target->thread.gcs_el0_mode;
> + user_gcs.features_locked = target->thread.gcs_el0_locked;
> + user_gcs.gcspr_el0 = target->thread.gcspr_el0;
> +
> + return membuf_write(&to, &user_gcs, sizeof(user_gcs));
> +}
> +
> +static int gcs_set(struct task_struct *target, const struct
> + user_regset *regset, unsigned int pos,
> + unsigned int count, const void *kbuf, const
> + void __user *ubuf)
> +{
> + int ret;
> + struct user_gcs user_gcs;
> +
> + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &user_gcs, 0, -1);
> + if (ret)
> + return ret;
> +
> + if (user_gcs.features_enabled & ~PR_SHADOW_STACK_SUPPORTED_STATUS_MASK)
> + return -EINVAL;
> +
> + /* Do not allow enable via ptrace */
> + if ((user_gcs.features_enabled & PR_SHADOW_STACK_ENABLE) &&
> + !!(target->thread.gcs_el0_mode & PR_SHADOW_STACK_ENABLE))
There should be only one '!' above.
Though contrary to the patch description, this code allows disabling
GCS. Shouldn't we require that
(user_gcs.features_enabled & PR_SHADOW_STACK_ENABLE) ==
(target->thread.gcs_el0_mode & PR_SHADOW_STACK_ENABLE)
? That would ensure that the GCS mode can't be changed.
> + return -EBUSY;
> +
> + target->thread.gcs_el0_mode = user_gcs.features_enabled;
> + target->thread.gcs_el0_locked = user_gcs.features_locked;
> + target->thread.gcspr_el0 = user_gcs.gcspr_el0;
> +
> + return 0;
> +}
> +#endif
--
Thiago
On Sat, Dec 09, 2023 at 08:49:02PM -0300, Thiago Jung Bauermann wrote:
> Mark Brown <[email protected]> writes:
> > Provide a new register type NT_ARM_GCS reporting the current GCS mode
> > and pointer for EL0. Due to the interactions with allocation and
> > deallocation of Guarded Control Stacks we do not permit any changes to
> > the GCS mode via ptrace, only GCSPR_EL0 may be changed.
> The code allows disabling GCS. Is that unintended?
No, it's intentional - ptrace has a lot of control over the process,
there's not a huge point trying to protect against it doing a disable.
The reason we prevent enabling is the allocation of a GCS along with
enable, the complexity of doing that on a remote process seemed
unjustified. If clone3() ends up allowing manual allocation and
placement that'll likely be revised.
On Wed, Nov 22, 2023 at 1:43 AM Mark Brown <[email protected]> wrote:
>
> Three architectures (x86, aarch64, riscv) have announced support for
> shadow stacks with fairly similar functionality. While x86 is using
> arch_prctl() to control the functionality neither arm64 nor riscv uses
> that interface so this patch adds arch-agnostic prctl() support to
> get and set status of shadow stacks and lock the current configuation to
> prevent further changes, with support for turning on and off individual
> subfeatures so applications can limit their exposure to features that
> they do not need. The features are:
>
> - PR_SHADOW_STACK_ENABLE: Tracking and enforcement of shadow stacks,
> including allocation of a shadow stack if one is not already
> allocated.
> - PR_SHADOW_STACK_WRITE: Writes to specific addresses in the shadow
> stack.
> - PR_SHADOW_STACK_PUSH: Push additional values onto the shadow stack.
>
> These features are expected to be inherited by new threads and cleared
> on exec(), unknown features should be rejected for enable but accepted
> for locking (in order to allow for future proofing).
>
> This is based on a patch originally written by Deepak Gupta but modified
> fairly heavily, support for indirect landing pads is removed, additional
> modes added and the locking interface reworked. The set status prctl()
> is also reworked to just set flags, if setting/reading the shadow stack
> pointer is required this could be a separate prctl.
>
> Signed-off-by: Mark Brown <[email protected]>
> ---
> include/linux/mm.h | 4 ++++
> include/uapi/linux/prctl.h | 22 ++++++++++++++++++++++
> kernel/sys.c | 30 ++++++++++++++++++++++++++++++
> 3 files changed, 56 insertions(+)
>
> diff --git a/include/linux/mm.h b/include/linux/mm.h
> index 10462f354614..8b28483b4afa 100644
> --- a/include/linux/mm.h
> +++ b/include/linux/mm.h
> @@ -4143,4 +4143,8 @@ static inline bool pfn_is_unaccepted_memory(unsigned long pfn)
> return range_contains_unaccepted_memory(paddr, paddr + PAGE_SIZE);
> }
>
> +int arch_get_shadow_stack_status(struct task_struct *t, unsigned long __user *status);
> +int arch_set_shadow_stack_status(struct task_struct *t, unsigned long status);
> +int arch_lock_shadow_stack_status(struct task_struct *t, unsigned long status);
> +
> #endif /* _LINUX_MM_H */
> diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
> index 370ed14b1ae0..3c66ed8f46d8 100644
> --- a/include/uapi/linux/prctl.h
> +++ b/include/uapi/linux/prctl.h
> @@ -306,4 +306,26 @@ struct prctl_mm_map {
> # define PR_RISCV_V_VSTATE_CTRL_NEXT_MASK 0xc
> # define PR_RISCV_V_VSTATE_CTRL_MASK 0x1f
>
> +/*
> + * Get the current shadow stack configuration for the current thread,
> + * this will be the value configured via PR_SET_SHADOW_STACK_STATUS.
> + */
> +#define PR_GET_SHADOW_STACK_STATUS 71
> +
> +/*
> + * Set the current shadow stack configuration. Enabling the shadow
> + * stack will cause a shadow stack to be allocated for the thread.
> + */
> +#define PR_SET_SHADOW_STACK_STATUS 72
> +# define PR_SHADOW_STACK_ENABLE (1UL << 0)
Other architecture may require disabling shadow stack if glibc
tunables is set to permissive mode.
In permissive mode, if glibc encounters `dlopen` on an object which
doesn't support shadow stack,
glibc should be able to issue PR_SHADOW_STACK_DISABLE.
Architectures can choose to implement or not but I think arch agnostic
code should enumerate this.
> +# define PR_SHADOW_STACK_WRITE (1UL << 1)
> +# define PR_SHADOW_STACK_PUSH (1UL << 2)
> +
> +/*
> + * Prevent further changes to the specified shadow stack
> + * configuration. All bits may be locked via this call, including
> + * undefined bits.
> + */
On Tue, Dec 12, 2023 at 11:17:11AM -0800, Deepak Gupta wrote:
> On Wed, Nov 22, 2023 at 1:43 AM Mark Brown <[email protected]> wrote:
> > +/*
> > + * Set the current shadow stack configuration. Enabling the shadow
> > + * stack will cause a shadow stack to be allocated for the thread.
> > + */
> > +#define PR_SET_SHADOW_STACK_STATUS 72
> > +# define PR_SHADOW_STACK_ENABLE (1UL << 0)
> Other architecture may require disabling shadow stack if glibc
> tunables is set to permissive mode.
> In permissive mode, if glibc encounters `dlopen` on an object which
> doesn't support shadow stack,
> glibc should be able to issue PR_SHADOW_STACK_DISABLE.
> Architectures can choose to implement or not but I think arch agnostic
> code should enumerate this.
The current implementation for arm64 and therefore API for the prctl()
is that whatever combination of flags is specified will be set, this
means that setting the status to something that does not include _ENABLE
will result in disabling and we don't need a separate flag for disable.
We have use cases that make active use of disabling at runtime.
Please delete unneeded context from replies, it makes it much easier to
find new content.
On Wed, 2023-11-22 at 09:42 +0000, Mark Brown wrote:
> These features are expected to be inherited by new threads and
> cleared
> on exec(), unknown features should be rejected for enable but
> accepted
> for locking (in order to allow for future proofing).
The reason why I stuck with arch_prctl when this came up is that CRIU
(and probably other ptracers) needs a way to unlock via ptrace. ptrace
arch_prctl() can do this. Did you have a plan for unlocking via ptrace?
On Tue, Dec 12, 2023 at 08:17:09PM +0000, Edgecombe, Rick P wrote:
> On Wed, 2023-11-22 at 09:42 +0000, Mark Brown wrote:
> > These features are expected to be inherited by new threads and
> > cleared
> > on exec(), unknown features should be rejected for enable but
> > accepted
> > for locking (in order to allow for future proofing).
> The reason why I stuck with arch_prctl when this came up is that CRIU
> (and probably other ptracers) needs a way to unlock via ptrace. ptrace
> arch_prctl() can do this. Did you have a plan for unlocking via ptrace?
The set of locked features is read/write via ptrace in my arm64 series,
that's architecture specific unfortunately but that seems to be the way
with ptrace.
In general if things have a need to get at prctl()s via ptrace we should
just fix that, at least for arm64 there's things like the vector lengths
that are currently controlled via prctl(), but it shouldn't be a blocker
for the locking specifically.
+Mike, who did the CRIU work
Re:
https://lore.kernel.org/lkml/[email protected]/
On Tue, 2023-12-12 at 20:26 +0000, Mark Brown wrote:
> The set of locked features is read/write via ptrace in my arm64
> series,
> that's architecture specific unfortunately but that seems to be the
> way
> with ptrace.
Ah, sorry I didn't see that later in the series. Makes sense.
>
> In general if things have a need to get at prctl()s via ptrace we
> should
> just fix that, at least for arm64 there's things like the vector
> lengths
> that are currently controlled via prctl(), but it shouldn't be a
> blocker
> for the locking specifically.
ptrace arch_prctl() is a bit odd. Not all values of 'option' are
supported because ptrace arch_prctl's have to operate cross task. Some
have extra code to support doing this, and some only know how to
operate on the current task, so return an error in the ptrace case.
I guess a benefit would be that there could be some arch agnostic
ptrace userspace code. And I'd also guess (really a guess) that most
ptracing code has some arch awareness already, but the other way is
probably non-zero. Same for shadow stack enabling code. Then on the
kernel side we'd have to add and support a ptrace prctl() solution.
Is it worth the effort? I don't have a strong opinion.
On Tue, Dec 12, 2023 at 11:23 AM Mark Brown <[email protected]> wrote:
>
> On Tue, Dec 12, 2023 at 11:17:11AM -0800, Deepak Gupta wrote:
> > On Wed, Nov 22, 2023 at 1:43 AM Mark Brown <[email protected]> wrote:
>
> > > +/*
> > > + * Set the current shadow stack configuration. Enabling the shadow
> > > + * stack will cause a shadow stack to be allocated for the thread.
> > > + */
> > > +#define PR_SET_SHADOW_STACK_STATUS 72
> > > +# define PR_SHADOW_STACK_ENABLE (1UL << 0)
>
> > Other architecture may require disabling shadow stack if glibc
> > tunables is set to permissive mode.
> > In permissive mode, if glibc encounters `dlopen` on an object which
> > doesn't support shadow stack,
> > glibc should be able to issue PR_SHADOW_STACK_DISABLE.
>
> > Architectures can choose to implement or not but I think arch agnostic
> > code should enumerate this.
>
> The current implementation for arm64 and therefore API for the prctl()
> is that whatever combination of flags is specified will be set, this
> means that setting the status to something that does not include _ENABLE
> will result in disabling and we don't need a separate flag for disable.
> We have use cases that make active use of disabling at runtime.
A theoretical scenario (no current workloads should've this case
because no shadow stack)
- User mode did _ENABLE on the main thread. Shadow stack was allocated
for the current
thread.
- User mode created a bunch worker threads to run untrusted contained
code. They shadow
stack too.
- main thread had to do dlopen and now need to disable shadow stack on
itself due to
incompatibility of incoming object in address space.
- main thread controls worker threads and knows they're contained and
should still be running
with a shadow stack. Although once in a while the main thread needs
to perform writes to a shadow
stack of worker threads for some fixup (in the same addr space).
main thread doesn't want to delegate
this responsibility of ss writes to worker threads because they're untrusted.
How will it do that (currently _ENABLE is married to _WRITE and _PUSH) ?
Please note that I am making up this scenario just for sake of discussion
And don't know if software would be using it in this manner.
>
> Please delete unneeded context from replies, it makes it much easier to
> find new content.
Sorry about that.
Noted.
I'm going a bit out-of-order to report a build failure in a test:
Mark Brown <[email protected]> writes:
> +// Recurse x20 times
> +.macro recurse id
I get an assembler error here:
gcc -nostdlib gcs-stress-thread.S -o /home/thiago.bauermann/src/linux/tools/testing/selftests/arm64/gcs/gcs-stress-thread
gcs-stress-thread.S: Assembler messages:
gcs-stress-thread.S:236: Error: unexpected end of file in macro `recurse' definition
make[2]: *** [Makefile:24: /home/thiago.bauermann/src/linux/tools/testing/selftests/arm64/gcs/gcs-stress-thread] Error 1
This is with gas from Ubuntu 22.04, which ships binutils 2.38.
> +function recurse\id
> + stp x29, x30, [sp, #-16]!
> + mov x29, sp
> +
> + cmp x20, 0
> + beq 1f
> + sub x20, x20, 1
> + bl recurse\id
> +
> +1:
> + ldp x29, x30, [sp], #16
> +
> + // Do a syscall immediately prior to returning to try to provoke
> + // scheduling and migration at a point where coherency issues
> + // might trigger.
> + mov x8, #__NR_getpid
> + svc #0
> +
> + ret
> +endfunction
> +.endmacro
> +
> +// Generate and use two copies so we're changing the GCS contents
> +recurse 1
> +recurse 2
--
Thiago
On Tue, Dec 12, 2023 at 04:50:38PM -0800, Deepak Gupta wrote:
> A theoretical scenario (no current workloads should've this case
> because no shadow stack)
> - User mode did _ENABLE on the main thread. Shadow stack was allocated
> for the current
> thread.
> - User mode created a bunch worker threads to run untrusted contained
> code. They shadow
> stack too.
> - main thread had to do dlopen and now need to disable shadow stack on
> itself due to
> incompatibility of incoming object in address space.
> - main thread controls worker threads and knows they're contained and
> should still be running
> with a shadow stack. Although once in a while the main thread needs
> to perform writes to a shadow
> stack of worker threads for some fixup (in the same addr space).
> main thread doesn't want to delegate
> this responsibility of ss writes to worker threads because they're untrusted.
> How will it do that (currently _ENABLE is married to _WRITE and _PUSH) ?
That's feeling moderately firmly into "don't do that" territory to be
honest, the problems of trying to modify the stack of another running
thread while it's active just don't seem worth it - if you're
coordinating enough to do the modifications it's probably possible to
just ask the thread who's stack is being modified to do the modification
itself and having an unprotected thread writing into shadow stack memory
doesn't feel great.
That said in terms of the API there would be nothing stopping us saying
that _WRITE by itself is a valid combination of flags, in which case the
thread would have permission to write to any shadow stack memory it
could get to. For arm64 I think we can implement that, I'm not sure
about x86. _PUSH without _ENABLE is a lot less clear, you would at the
very least at some point have had a stack enabled to have a stack
pointer.
On Tue, Dec 12, 2023 at 09:22:59PM +0000, Edgecombe, Rick P wrote:
> On Tue, 2023-12-12 at 20:26 +0000, Mark Brown wrote:
> > In general if things have a need to get at prctl()s via ptrace we
> > should
> > just fix that, at least for arm64 there's things like the vector
> > lengths
> > that are currently controlled via prctl(), but it shouldn't be a
> > blocker
> > for the locking specifically.
> ptrace arch_prctl() is a bit odd. Not all values of 'option' are
> supported because ptrace arch_prctl's have to operate cross task. Some
> have extra code to support doing this, and some only know how to
> operate on the current task, so return an error in the ptrace case.
It feels like x86 is doing some things via arch_prctl() rather than
implementing specific ptrace() interfaces for them, there's a lot of
stuff where ptrace isn't a great fit for due to it's concept that it's
going to work with an array of registers so that's understandable.
> I guess a benefit would be that there could be some arch agnostic
> ptrace userspace code. And I'd also guess (really a guess) that most
> ptracing code has some arch awareness already, but the other way is
> probably non-zero. Same for shadow stack enabling code. Then on the
> kernel side we'd have to add and support a ptrace prctl() solution.
> Is it worth the effort? I don't have a strong opinion.
I don't have a strong enough opinion on it to start working on it
immediately at any rate.
On Wed, Dec 13, 2023 at 5:37 AM Mark Brown <[email protected]> wrote:
>
> On Tue, Dec 12, 2023 at 04:50:38PM -0800, Deepak Gupta wrote:
>
> > A theoretical scenario (no current workloads should've this case
> > because no shadow stack)
>
> > - User mode did _ENABLE on the main thread. Shadow stack was allocated
> > for the current
> > thread.
> > - User mode created a bunch worker threads to run untrusted contained
> > code. They shadow
> > stack too.
> > - main thread had to do dlopen and now need to disable shadow stack on
> > itself due to
> > incompatibility of incoming object in address space.
> > - main thread controls worker threads and knows they're contained and
> > should still be running
> > with a shadow stack. Although once in a while the main thread needs
> > to perform writes to a shadow
> > stack of worker threads for some fixup (in the same addr space).
> > main thread doesn't want to delegate
> > this responsibility of ss writes to worker threads because they're untrusted.
>
> > How will it do that (currently _ENABLE is married to _WRITE and _PUSH) ?
>
> That's feeling moderately firmly into "don't do that" territory to be
> honest, the problems of trying to modify the stack of another running
> thread while it's active just don't seem worth it - if you're
> coordinating enough to do the modifications it's probably possible to
> just ask the thread who's stack is being modified to do the modification
> itself and having an unprotected thread writing into shadow stack memory
> doesn't feel great.
>
Yeah no leanings on my side. Just wanted to articulate this scenario.
Since this is new ground,
we can define what's appropriate. Let's keep it this way where a
thread can write to shadow
stack mappings only when it itself has shadow stack enabled.
On Wed, Dec 13, 2023 at 11:43:49AM -0800, Deepak Gupta wrote:
> On Wed, Dec 13, 2023 at 5:37 AM Mark Brown <[email protected]> wrote:
> > On Tue, Dec 12, 2023 at 04:50:38PM -0800, Deepak Gupta wrote:
> > > How will it do that (currently _ENABLE is married to _WRITE and _PUSH) ?
> > That's feeling moderately firmly into "don't do that" territory to be
> > honest, the problems of trying to modify the stack of another running
> > thread while it's active just don't seem worth it - if you're
> > coordinating enough to do the modifications it's probably possible to
> > just ask the thread who's stack is being modified to do the modification
> > itself and having an unprotected thread writing into shadow stack memory
> > doesn't feel great.
> Yeah no leanings on my side. Just wanted to articulate this scenario.
> Since this is new ground,
> we can define what's appropriate. Let's keep it this way where a
> thread can write to shadow
> stack mappings only when it itself has shadow stack enabled.
Sounds good to me - it's much easier to relax permissions later than to
tighten them up.
On Wed, Nov 22, 2023 at 1:45 AM Mark Brown <[email protected]> wrote:
> +
> +/*
> + * Apply the GCS mode configured for the specified task to the
> + * hardware.
> + */
> +void gcs_set_el0_mode(struct task_struct *task)
> +{
> + u64 gcscre0_el1 = GCSCRE0_EL1_nTR;
> +
> + if (task->thread.gcs_el0_mode & PR_SHADOW_STACK_ENABLE)
> + gcscre0_el1 |= GCSCRE0_EL1_RVCHKEN | GCSCRE0_EL1_PCRSEL;
If the intent is to disable, is the GCS stack freed or kept around?
I expect if libc is taking the decision to disable, kernel should free it up.
Is it freed in some other flow?
> +
> + if (task->thread.gcs_el0_mode & PR_SHADOW_STACK_WRITE)
> + gcscre0_el1 |= GCSCRE0_EL1_STREn;
> +
> + if (task->thread.gcs_el0_mode & PR_SHADOW_STACK_PUSH)
> + gcscre0_el1 |= GCSCRE0_EL1_PUSHMEn;
> +
> + write_sysreg_s(gcscre0_el1, SYS_GCSCRE0_EL1);
> +}
On Wed, Dec 13, 2023 at 11:59:45AM -0800, Deepak Gupta wrote:
> On Wed, Nov 22, 2023 at 1:45 AM Mark Brown <[email protected]> wrote:
> > + if (task->thread.gcs_el0_mode & PR_SHADOW_STACK_ENABLE)
> > + gcscre0_el1 |= GCSCRE0_EL1_RVCHKEN | GCSCRE0_EL1_PCRSEL;
> If the intent is to disable, is the GCS stack freed or kept around?
> I expect if libc is taking the decision to disable, kernel should free it up.
> Is it freed in some other flow?
Kept around and freed on thread exit. There is a potential race between
for example disabling in a signal handler and something trying to walk
the stack so we err on the side of caution.
Mark Brown <[email protected]> writes:
> + /* Same thing via process_vm_readv() */
> + local_iov.iov_base = &rval;
> + local_iov.iov_len = sizeof(rval);
> + remote_iov.iov_base = (void *)gcspr;
> + remote_iov.iov_len = sizeof(rval);
> + ret = process_vm_writev(child, &local_iov, 1, &remote_iov, 1, 0);
> + if (ret == -1)
> + ksft_print_msg("process_vm_readv() failed: %s (%d)\n",
> + strerror(errno), errno);
The comment and the error message say "process_vm_readv()", but the
function actually called is process_vm_writev(). Is this intended?
Also, process_vm_writev() is failing when I run on my Arm FVP:
# # RUN global.ptrace_read_write ...
# # Child: 1150
# # Child GCSPR 0xffffa210ffd8, flags 1, locked 0
# # process_vm_readv() failed: Bad address (14)
# # libc-gcs.c:271:ptrace_read_write:Expected ret (-1) == sizeof(rval) (8)
# # libc-gcs.c:272:ptrace_read_write:Expected val (281473401005692) == rval (281473402849248)
# # libc-gcs.c:293:ptrace_read_write:Expected val (281473401005692) == ptrace(PTRACE_PEEKDATA, child, (void *)gcspr, NULL) (0)
# # ptrace_read_write: Test failed at step #1
# # FAIL global.ptrace_read_write
# not ok 4 global.ptrace_read_write
If I swap process_vm_readv() and process_vm_writev(), then the read
succeeds but the write fails:
# RUN global.ptrace_read_write ...
# Child: 1996
# Child GCSPR 0xffffa7fcffd8, flags 1, locked 0
# process_vm_writev() failed: Bad address (14)
# libc-gcs.c:291:ptrace_read_write:Expected ret (-1) == sizeof(rval) (8)
# libc-gcs.c:293:ptrace_read_write:Expected val (281473500358268) == ptrace(PTRACE_PEEKDATA, child, (void *)gcspr, NULL) (0)
# ptrace_read_write: Test failed at step #1
# FAIL global.ptrace_read_write
not ok 4 global.ptrace_read_write
> +/* Put it all together, we can safely switch to and from the stack */
> +TEST_F(map_gcs, stack_switch)
> +{
> + size_t cap_index;
> + cap_index = (variant->stack_size / sizeof(unsigned long));
> + unsigned long *orig_gcspr_el0, *pivot_gcspr_el0;
> +
> + /* Skip over the stack terminator and point at the cap */
> + switch (variant->flags & (SHADOW_STACK_SET_MARKER | SHADOW_STACK_SET_TOKEN)) {
> + case SHADOW_STACK_SET_MARKER | SHADOW_STACK_SET_TOKEN:
> + cap_index -= 2;
> + break;
> + case SHADOW_STACK_SET_TOKEN:
> + cap_index -= 1;
> + break;
> + case SHADOW_STACK_SET_MARKER:
> + case 0:
> + /* No cap, no test */
> + return;
> + }
> + pivot_gcspr_el0 = &self->stack[cap_index];
> +
> + /* Pivot to the new GCS */
> + ksft_print_msg("Pivoting to %p from %p, target has value 0x%lx\n",
> + pivot_gcspr_el0, get_gcspr(),
> + *pivot_gcspr_el0);
> + gcsss1(pivot_gcspr_el0);
> + orig_gcspr_el0 = gcsss2();
> + ksft_print_msg("Pivoted to %p from %p, target has value 0x%lx\n",
> + pivot_gcspr_el0, get_gcspr(),
Not sure about the intent here, but perhaps "get_gcspr()" here should be
"orig_gcspr_el0" instead? Ditto in the equivalent place at the
map_gcs.stack_overflow test below.
Also, it's strange that the tests defined after map_gcs.stack_overflow
don't run when I execute this test program. I'm doing:
$ ./run_kselftest.sh -t arm64:libc-gcs
I.e., these tests aren't being run in my FVP:
> +FIXTURE_VARIANT_ADD(map_invalid_gcs, too_small)
> +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_1)
> +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_2)
> +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_3)
> +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_4)
> +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_5)
> +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_6)
> +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_7)
> +TEST_F(map_invalid_gcs, do_map)
> +FIXTURE_VARIANT_ADD(invalid_mprotect, exec)
> +FIXTURE_VARIANT_ADD(invalid_mprotect, bti)
> +FIXTURE_VARIANT_ADD(invalid_mprotect, exec_bti)
> +TEST_F(invalid_mprotect, do_map)
> +TEST_F(invalid_mprotect, do_map_read)
Finally, one last comment:
> +int main(int argc, char **argv)
> +{
> + unsigned long gcs_mode;
> + int ret;
> +
> + if (!(getauxval(AT_HWCAP2) & HWCAP2_GCS))
> + ksft_exit_skip("SKIP GCS not supported\n");
> +
> + /*
> + * Force shadow stacks on, our tests *should* be fine with or
> + * without libc support and with or without this having ended
> + * up tagged for GCS and enabled by the dynamic linker. We
> + * can't use the libc prctl() function since we can't return
> + * from enabling the stack. Also lock GCS if not already
> + * locked so we can test behaviour when it's locked.
This is probably a leftover from a previous version: the test doesn't
lock any GCS flag.
> + */
> + ret = my_syscall2(__NR_prctl, PR_GET_SHADOW_STACK_STATUS, &gcs_mode);
> + if (ret) {
> + ksft_print_msg("Failed to read GCS state: %d\n", ret);
> + return EXIT_FAILURE;
> + }
> +
> + if (!(gcs_mode & PR_SHADOW_STACK_ENABLE)) {
> + gcs_mode = PR_SHADOW_STACK_ENABLE;
> + ret = my_syscall2(__NR_prctl, PR_SET_SHADOW_STACK_STATUS,
> + gcs_mode);
> + if (ret) {
> + ksft_print_msg("Failed to configure GCS: %d\n", ret);
> + return EXIT_FAILURE;
> + }
> + }
> +
> + /* Avoid returning in case libc doesn't understand GCS */
> + exit(test_harness_run(argc, argv));
> +}
--
Thiago
On Thu, Dec 14, 2023 at 11:50:11PM -0300, Thiago Jung Bauermann wrote:
> Mark Brown <[email protected]> writes:
> > + ret = process_vm_writev(child, &local_iov, 1, &remote_iov, 1, 0);
> > + if (ret == -1)
> > + ksft_print_msg("process_vm_readv() failed: %s (%d)\n",
> > + strerror(errno), errno);
> The comment and the error message say "process_vm_readv()", but the
> function actually called is process_vm_writev(). Is this intended?
No, that's a rebasing issue.
> If I swap process_vm_readv() and process_vm_writev(), then the read
> succeeds but the write fails:
>
> # RUN global.ptrace_read_write ...
> # Child: 1996
> # Child GCSPR 0xffffa7fcffd8, flags 1, locked 0
> # process_vm_writev() failed: Bad address (14)
> # libc-gcs.c:291:ptrace_read_write:Expected ret (-1) == sizeof(rval) (8)
> # libc-gcs.c:293:ptrace_read_write:Expected val (281473500358268) == ptrace(PTRACE_PEEKDATA, child, (void *)gcspr, NULL) (0)
> # ptrace_read_write: Test failed at step #1
> # FAIL global.ptrace_read_write
> not ok 4 global.ptrace_read_write
Yeah, I did notice something had happened with the writes but didn't
investigate yet.
> Also, it's strange that the tests defined after map_gcs.stack_overflow
> don't run when I execute this test program. I'm doing:
> $ ./run_kselftest.sh -t arm64:libc-gcs
> I.e., these tests aren't being run in my FVP:
> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, too_small)
> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_1)
> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_2)
> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_3)
> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_4)
> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_5)
> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_6)
> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_7)
> > +TEST_F(map_invalid_gcs, do_map)
> > +FIXTURE_VARIANT_ADD(invalid_mprotect, exec)
> > +FIXTURE_VARIANT_ADD(invalid_mprotect, bti)
> > +FIXTURE_VARIANT_ADD(invalid_mprotect, exec_bti)
> > +TEST_F(invalid_mprotect, do_map)
> > +TEST_F(invalid_mprotect, do_map_read)
I'm seeing all of those appearing. I'm not sure what to say there -
that's all kselftest framework stuff, I'd expect the framework to say
something about what it's doing if it decides to skip and I can't think
why it would decide to skip.
Mark Brown <[email protected]> writes:
> diff --git a/tools/testing/selftests/arm64/signal/testcases/gcs_exception_fault.c b/tools/testing/selftests/arm64/signal/testcases/gcs_exception_fault.c
> new file mode 100644
> index 000000000000..532d533592a1
> --- /dev/null
> +++ b/tools/testing/selftests/arm64/signal/testcases/gcs_exception_fault.c
> @@ -0,0 +1,59 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2023 ARM Limited
> + */
> +
> +#include <errno.h>
> +#include <signal.h>
> +#include <unistd.h>
> +
> +#include <sys/mman.h>
> +#include <sys/prctl.h>
> +
> +#include "test_signals_utils.h"
> +#include "testcases.h"
> +
> +/* This should be includable from some standard header, but which? */
> +#ifndef SEGV_CPERR
> +#define SEGV_CPERR 10
> +#endif
One suggestion is include/uapi/asm-generic/siginfo.h. It already has
SEGV_MTEAERR and SEGV_MTESERR, as well as si_codes specific to other
arches.
From there, it should find its way to glibc's
sysdeps/unix/sysv/linux/bits/siginfo-consts.h.
> +static int gcs_regs(struct tdescr *td, siginfo_t *si, ucontext_t *uc)
> +{
> + size_t offset;
> + struct _aarch64_ctx *head = GET_BUF_RESV_HEAD(context);
> + struct gcs_context *gcs;
> + unsigned long expected, gcspr;
> + int ret;
> +
> + ret = prctl(PR_GET_SHADOW_STACK_STATUS, &expected, 0, 0, 0);
> + if (ret != 0) {
> + fprintf(stderr, "Unable to query GCS status\n");
> + return 1;
> + }
> +
> + /* We expect a cap to be added to the GCS in the signal frame */
> + gcspr = get_gcspr_el0();
> + gcspr -= 8;
> + fprintf(stderr, "Expecting GCSPR_EL0 %lx\n", gcspr);
> +
> + if (!get_current_context(td, &context.uc, sizeof(context))) {
> + fprintf(stderr, "Failed getting context\n");
> + return 1;
> + }
At this point, before any function call is made, can the test check that
*(gcspr + 8) == 0? This would detect the issue I mentioned in
patch 24 of gcs_restore_signal() not zeroing the location of the cap.
> + fprintf(stderr, "Got context\n");
> +
> + head = get_header(head, GCS_MAGIC, GET_BUF_RESV_SIZE(context),
> + &offset);
> + if (!head) {
> + fprintf(stderr, "No GCS context\n");
> + return 1;
> + }
> +
> + gcs = (struct gcs_context *)head;
> +
> + /* Basic size validation is done in get_current_context() */
> +
> + if (gcs->features_enabled != expected) {
> + fprintf(stderr, "Features enabled %llx but expected %lx\n",
> + gcs->features_enabled, expected);
> + return 1;
> + }
> +
> + if (gcs->gcspr != gcspr) {
> + fprintf(stderr, "Got GCSPR %llx but expected %lx\n",
> + gcs->gcspr, gcspr);
> + return 1;
> + }
I suggest adding a new check here to ensure that gcs->reserved == 0.
> + fprintf(stderr, "GCS context validated\n");
> + td->pass = 1;
> +
> + return 0;
> +}
> +
> +struct tdescr tde = {
> + .name = "GCS basics",
> + .descr = "Validate a GCS signal context",
> + .feats_required = FEAT_GCS,
> + .timeout = 3,
> + .run = gcs_regs,
> +};
> diff --git a/tools/testing/selftests/arm64/signal/testcases/gcs_write_fault.c b/tools/testing/selftests/arm64/signal/testcases/gcs_write_fault.c
> new file mode 100644
> index 000000000000..126b1a294a29
> --- /dev/null
> +++ b/tools/testing/selftests/arm64/signal/testcases/gcs_write_fault.c
> @@ -0,0 +1,67 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2023 ARM Limited
> + */
> +
> +#include <errno.h>
> +#include <signal.h>
> +#include <unistd.h>
> +
> +#include <sys/mman.h>
> +#include <sys/prctl.h>
> +
> +#include "test_signals_utils.h"
> +#include "testcases.h"
> +
> +static uint64_t *gcs_page;
> +
> +#ifndef __NR_map_shadow_stack
> +#define __NR_map_shadow_stack 452
> +#endif
> +
> +static bool alloc_gcs(struct tdescr *td)
> +{
> + long page_size = sysconf(_SC_PAGE_SIZE);
> +
> + gcs_page = (void *)syscall(__NR_map_shadow_stack, 0,
> + page_size, 0);
> + if (gcs_page == MAP_FAILED) {
> + fprintf(stderr, "Failed to map %ld byte GCS: %d\n",
> + page_size, errno);
This call is failing with EINVAL for me:
# timeout set to 45
# selftests: arm64/signal: gcs_write_fault
# # GCS write fault :: Normal writes to a GCS segfault
# Registered handlers for all signals.
# Detected MINSTKSIGSZ:4720
# Required Features: [ GCS ] supported
# Incompatible Features: [] absent
# Failed to map 4096 byte GCS: 22
# FAILED Testcase initialization.
# ==>> completed. FAIL(0)
not ok 11 selftests: arm64/signal: gcs_write_fault # exit=1
> + return false;
> + }
> +
> + return true;
> +}
--
Thiago
Mark Brown <[email protected]> writes:
>> Also, it's strange that the tests defined after map_gcs.stack_overflow
>> don't run when I execute this test program. I'm doing:
>
>> $ ./run_kselftest.sh -t arm64:libc-gcs
>
>> I.e., these tests aren't being run in my FVP:
>
>> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, too_small)
>> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_1)
>> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_2)
>> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_3)
>> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_4)
>> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_5)
>> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_6)
>> > +FIXTURE_VARIANT_ADD(map_invalid_gcs, unligned_7)
>> > +TEST_F(map_invalid_gcs, do_map)
>> > +FIXTURE_VARIANT_ADD(invalid_mprotect, exec)
>> > +FIXTURE_VARIANT_ADD(invalid_mprotect, bti)
>> > +FIXTURE_VARIANT_ADD(invalid_mprotect, exec_bti)
>> > +TEST_F(invalid_mprotect, do_map)
>> > +TEST_F(invalid_mprotect, do_map_read)
>
> I'm seeing all of those appearing. I'm not sure what to say there -
> that's all kselftest framework stuff, I'd expect the framework to say
> something about what it's doing if it decides to skip and I can't think
> why it would decide to skip.
Thanks. I'll poke some more to see if I can figure out what's going on.
--
Thiago
Mark Brown <[email protected]> writes:
> arm64/mm: Restructure arch_validate_flags() for extensibility
> prctl: arch-agnostic prctl for shadow stack
> mman: Add map_shadow_stack() flags
> arm64: Document boot requirements for Guarded Control Stacks
> arm64/gcs: Document the ABI for Guarded Control Stacks
> arm64/sysreg: Add new system registers for GCS
> arm64/sysreg: Add definitions for architected GCS caps
> arm64/gcs: Add manual encodings of GCS instructions
> arm64/gcs: Provide put_user_gcs()
> arm64/cpufeature: Runtime detection of Guarded Control Stack (GCS)
> arm64/mm: Allocate PIE slots for EL0 guarded control stack
> mm: Define VM_SHADOW_STACK for arm64 when we support GCS
> arm64/mm: Map pages for guarded control stack
> KVM: arm64: Manage GCS registers for guests
> arm64/gcs: Allow GCS usage at EL0 and EL1
> arm64/idreg: Add overrride for GCS
> arm64/hwcap: Add hwcap for GCS
> arm64/traps: Handle GCS exceptions
> arm64/mm: Handle GCS data aborts
> arm64/gcs: Context switch GCS state for EL0
> arm64/gcs: Allocate a new GCS for threads with GCS enabled
> arm64/gcs: Implement shadow stack prctl() interface
> arm64/mm: Implement map_shadow_stack()
> arm64/signal: Set up and restore the GCS context for signal handlers
> arm64/signal: Expose GCS state in signal frames
> arm64/ptrace: Expose GCS via ptrace and core files
> arm64: Add Kconfig for Guarded Control Stack (GCS)
> kselftest/arm64: Verify the GCS hwcap
> kselftest/arm64: Add GCS as a detected feature in the signal tests
> kselftest/arm64: Add framework support for GCS to signal handling tests
> kselftest/arm64: Allow signals tests to specify an expected si_code
> kselftest/arm64: Always run signals tests with GCS enabled
> kselftest/arm64: Add very basic GCS test program
> kselftest/arm64: Add a GCS test program built with the system libc
> kselftest/arm64: Add test coverage for GCS mode locking
> selftests/arm64: Add GCS signal tests
> kselftest/arm64: Add a GCS stress test
> kselftest/arm64: Enable GCS for the FP stress tests
> kselftest/clone3: Enable GCS in the clone3 selftests
Not sure if this is warranted, so sorry for the potential spam:
I don't have any comments on the patches I haven't replied to.
--
Thiago
On Thu, Dec 14, 2023 at 11:50:11PM -0300, Thiago Jung Bauermann wrote:
> If I swap process_vm_readv() and process_vm_writev(), then the read
> succeeds but the write fails:
The writes are intended to fail, for security reasons we explicitly
block this API for GCS pages. Given that process_vm_writev() is only
available with similar permissions to ptrace() which does not have these
restrictions this on first consideration feels like something that we
should allow but it feels out of scope for this already very large
series to do so so I'll fix the test.
On Sat, Dec 16, 2023 at 11:12:37PM -0300, Thiago Jung Bauermann wrote:
> Mark Brown <[email protected]> writes:
> > +/* This should be includable from some standard header, but which? */
> > +#ifndef SEGV_CPERR
> > +#define SEGV_CPERR 10
> > +#endif
> One suggestion is include/uapi/asm-generic/siginfo.h. It already has
> SEGV_MTEAERR and SEGV_MTESERR, as well as si_codes specific to other
> arches.
Sadly the testsuite is being very clever with redefining siginfo_t which
means it conflicts with that header. I'll update the comment.
> > + if (!get_current_context(td, &context.uc, sizeof(context))) {
> > + fprintf(stderr, "Failed getting context\n");
> > + return 1;
> > + }
> At this point, before any function call is made, can the test check that
> *(gcspr + 8) == 0? This would detect the issue I mentioned in
> patch 24 of gcs_restore_signal() not zeroing the location of the cap.
Sure.
> > + if (gcs->gcspr != gcspr) {
> > + fprintf(stderr, "Got GCSPR %llx but expected %lx\n",
> > + gcs->gcspr, gcspr);
> > + return 1;
> > + }
> I suggest adding a new check here to ensure that gcs->reserved == 0.
This would mean that you couldn't use an old kselftest build to verify
a new kernel that starts using the reserved bits. It's niche but it
does seem like something that should work.