From: Martin Tůma <[email protected]>
Hi,
This patch adds a driver for the Digiteq Automotive MGB4 grabber card.
MGB4 is a modular frame grabber PCIe card for automotive video interfaces
(FPD-Link and GMSL for now). It is based on a Xilinx FPGA and uses their
XDMA IP core for DMA transfers. Additionally, Xilinx I2C and SPI IP cores
which already have drivers in linux are used in the design.
The driver is a quite standard v4l2 driver, with one exception - there are
a lot of sysfs options that may/must be set before opening the v4l2 device
to adapt the card on a specific signal (see mgb4.rst for details)
as the card must be able to work with various signal sources (or displays)
that can not be auto-detected.
Changes in v11
* Fixed broken video buffer size check.
* Documented video queue checks/locking during I/O reconfiguration and signal
parameters changes.
Changes in v10:
* Use propper locks/is_busy functions when accessing the video devices in
the sysfs callbacks.
* Fixed issues found by the sparse/smatch tools.
Changes in v9:
* Renamed all sysfs show/store functions using the propper naming convention.
* Now using device_add_groups() when initializing the sysfs properties.
* Fixed build without debugfs support.
* Fixed documentation (vsync/hsync) + added default values where applicable.
* Fixed the rest of minor issues from v8 review.
Changes in v8:
* Fixed broken video buffer size computation.
* Fixed switched I2C deserializers addresses.
* Do not depend on hwmon.
Changes in v7:
* Now using hwmon for FPGA temperature reporting.
* Now using VIDIOC_S_FMT and v4l2_pix_format.bytesperline for setting
the alignment.
* Removed the magic sleep when loading the i2c/spi adapter modules (solved by
request_module() calls with propper - "platform:" prefixed - module
names).
* Now properly reporting all the timings info in the VIDIOC_G_DV_TIMINGS
ioctls.
* Updated the documentation.
* Minor fixes as discussed in the v6 review.
* Added debugfs access to the FPGA registers.
Changes in v6:
* Rebased to current master that includes the Xilinx XDMA driver.
Changes in v5:
* Removed unused <linux/version.h> includes
Changes in v4:
* Redesigned the signal change handling logic. Now using the propper timings
API in the video input driver and a propper open() syscall check/logic in
the video output driver.
* Fixed all minor issues from v3 review.
* 'checkpatch.pl --strict' used for checking the code.
Changes in v3:
* Rebased the DMA transfers part to use the new XDMA driver from Xilinx/AMD
Changes in v2:
* Completely rewritten the original Xilinx's XDMA driver to meet kernel code
standards.
* Added all required "to" and "cc" mail addresses.
===== v4l2-compliance results - input =====
v4l2-compliance 1.24.1, 64 bits, 64-bit time_t
Compliance test for mgb4 device /dev/video0:
Driver Info:
Driver name : mgb4
Card type : MGB4 PCIe Card
Bus info : PCI:0000:01:00.0
Driver version : 6.4.0
Capabilities : 0x85200001
Video Capture
Read/Write
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x05200001
Video Capture
Read/Write
Streaming
Extended Pix Format
Required ioctls:
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
test VIDIOC_DV_TIMINGS_CAP: OK
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls (Input 0):
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
warn: v4l2-test-controls.cpp(1139): V4L2_CID_DV_RX_POWER_PRESENT not found for input 0
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls (Input 0):
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls (Input 0):
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls (Input 0):
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Total for mgb4 device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 1
===== v4l2-compliance results - output =====
v4l2-compliance 1.24.1, 64 bits, 64-bit time_t
Compliance test for mgb4 device /dev/video2:
Driver Info:
Driver name : mgb4
Card type : MGB4 PCIe Card
Bus info : PCI:0000:01:00.0
Driver version : 6.4.0
Capabilities : 0x85200002
Video Output
Read/Write
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x05200002
Video Output
Read/Write
Streaming
Extended Pix Format
Required ioctls:
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video2 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 1 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls (Output 0):
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls (Output 0):
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls (Output 0):
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls (Output 0):
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Total for mgb4 device /dev/video2: 45, Succeeded: 45, Failed: 0, Warnings: 0
Martin Tůma (2):
Added Digiteq Automotive MGB4 driver
Added Digiteq Automotive MGB4 driver documentation
Documentation/admin-guide/media/mgb4.rst | 374 +++++++
.../admin-guide/media/pci-cardlist.rst | 1 +
.../admin-guide/media/v4l-drivers.rst | 1 +
MAINTAINERS | 7 +
drivers/media/pci/Kconfig | 1 +
drivers/media/pci/Makefile | 1 +
drivers/media/pci/mgb4/Kconfig | 17 +
drivers/media/pci/mgb4/Makefile | 6 +
drivers/media/pci/mgb4/mgb4_cmt.c | 244 +++++
drivers/media/pci/mgb4/mgb4_cmt.h | 17 +
drivers/media/pci/mgb4/mgb4_core.c | 686 +++++++++++++
drivers/media/pci/mgb4/mgb4_core.h | 74 ++
drivers/media/pci/mgb4/mgb4_dma.c | 123 +++
drivers/media/pci/mgb4/mgb4_dma.h | 18 +
drivers/media/pci/mgb4/mgb4_i2c.c | 140 +++
drivers/media/pci/mgb4/mgb4_i2c.h | 35 +
drivers/media/pci/mgb4/mgb4_io.h | 33 +
drivers/media/pci/mgb4/mgb4_regs.c | 30 +
drivers/media/pci/mgb4/mgb4_regs.h | 35 +
drivers/media/pci/mgb4/mgb4_sysfs.h | 18 +
drivers/media/pci/mgb4/mgb4_sysfs_in.c | 772 ++++++++++++++
drivers/media/pci/mgb4/mgb4_sysfs_out.c | 737 ++++++++++++++
drivers/media/pci/mgb4/mgb4_sysfs_pci.c | 71 ++
drivers/media/pci/mgb4/mgb4_trigger.c | 208 ++++
drivers/media/pci/mgb4/mgb4_trigger.h | 8 +
drivers/media/pci/mgb4/mgb4_vin.c | 939 ++++++++++++++++++
drivers/media/pci/mgb4/mgb4_vin.h | 69 ++
drivers/media/pci/mgb4/mgb4_vout.c | 602 +++++++++++
drivers/media/pci/mgb4/mgb4_vout.h | 65 ++
29 files changed, 5332 insertions(+)
create mode 100644 Documentation/admin-guide/media/mgb4.rst
create mode 100644 drivers/media/pci/mgb4/Kconfig
create mode 100644 drivers/media/pci/mgb4/Makefile
create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.c
create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.h
create mode 100644 drivers/media/pci/mgb4/mgb4_core.c
create mode 100644 drivers/media/pci/mgb4/mgb4_core.h
create mode 100644 drivers/media/pci/mgb4/mgb4_dma.c
create mode 100644 drivers/media/pci/mgb4/mgb4_dma.h
create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.c
create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.h
create mode 100644 drivers/media/pci/mgb4/mgb4_io.h
create mode 100644 drivers/media/pci/mgb4/mgb4_regs.c
create mode 100644 drivers/media/pci/mgb4/mgb4_regs.h
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs.h
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_in.c
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_out.c
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_pci.c
create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.c
create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.h
create mode 100644 drivers/media/pci/mgb4/mgb4_vin.c
create mode 100644 drivers/media/pci/mgb4/mgb4_vin.h
create mode 100644 drivers/media/pci/mgb4/mgb4_vout.c
create mode 100644 drivers/media/pci/mgb4/mgb4_vout.h
base-commit: 27bbf45eae9ca98877a2d52a92a188147cd61b07
--
2.40.1
From: Martin Tůma <[email protected]>
The "admin-guide" documentation for the Digiteq Automotive MGB4 driver.
Signed-off-by: Martin Tůma <[email protected]>
---
Documentation/admin-guide/media/mgb4.rst | 374 ++++++++++++++++++
.../admin-guide/media/pci-cardlist.rst | 1 +
.../admin-guide/media/v4l-drivers.rst | 1 +
3 files changed, 376 insertions(+)
create mode 100644 Documentation/admin-guide/media/mgb4.rst
diff --git a/Documentation/admin-guide/media/mgb4.rst b/Documentation/admin-guide/media/mgb4.rst
new file mode 100644
index 000000000000..2977f74d7e26
--- /dev/null
+++ b/Documentation/admin-guide/media/mgb4.rst
@@ -0,0 +1,374 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+mgb4 sysfs interface
+====================
+
+The mgb4 driver provides a sysfs interface, that is used to configure video
+stream related parameters (some of them must be set properly before the v4l2
+device can be opened) and obtain the video device/stream status.
+
+There are two types of parameters - global / PCI card related, found under
+``/sys/class/video4linux/videoX/device`` and module specific found under
+``/sys/class/video4linux/videoX``.
+
+
+Global (PCI card) parameters
+============================
+
+**module_type** (R):
+ Module type.
+
+ | 0 - No module present
+ | 1 - FPDL3
+ | 2 - GMSL
+
+**module_version** (R):
+ Module version number. Zero in case of a missing module.
+
+**fw_type** (R):
+ Firmware type.
+
+ | 1 - FPDL3
+ | 2 - GMSL
+
+**fw_version** (R):
+ Firmware version number.
+
+**serial_number** (R):
+ Card serial number. The format is::
+
+ PRODUCT-REVISION-SERIES-SERIAL
+
+ where each component is a 8b number.
+
+
+Common FPDL3/GMSL input parameters
+==================================
+
+**input_id** (R):
+ Input number ID, zero based.
+
+**oldi_lane_width** (RW):
+ Number of deserializer output lanes.
+
+ | 0 - single
+ | 1 - dual (default)
+
+**color_mapping** (RW):
+ Mapping of the incoming bits in the signal to the colour bits of the pixels.
+
+ | 0 - OLDI/JEIDA
+ | 1 - SPWG/VESA (default)
+
+**link_status** (R):
+ Video link status. If the link is locked, chips are properly connected and
+ communicating at the same speed and protocol. The link can be locked without
+ an active video stream.
+
+ A value of 0 is equivalent to the V4L2_IN_ST_NO_SYNC flag of the V4L2
+ VIDIOC_ENUMINPUT status bits.
+
+ | 0 - unlocked
+ | 1 - locked
+
+**stream_status** (R):
+ Video stream status. A stream is detected if the link is locked, the input
+ pixel clock is running and the DE signal is moving.
+
+ A value of 0 is equivalent to the V4L2_IN_ST_NO_SIGNAL flag of the V4L2
+ VIDIOC_ENUMINPUT status bits.
+
+ | 0 - not detected
+ | 1 - detected
+
+**video_width** (R):
+ Video stream width. This is the actual width as detected by the HW.
+
+ The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in the width
+ field of the v4l2_bt_timings struct.
+
+**video_height** (R):
+ Video stream height. This is the actual height as detected by the HW.
+
+ The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in the height
+ field of the v4l2_bt_timings struct.
+
+**vsync_status** (R):
+ The type of VSYNC pulses as detected by the video format detector.
+
+ The value is equivalent to the flags returned by VIDIOC_QUERY_DV_TIMINGS in
+ the polarities field of the v4l2_bt_timings struct.
+
+ | 0 - active low
+ | 1 - active high
+ | 2 - not available
+
+**hsync_status** (R):
+ The type of HSYNC pulses as detected by the video format detector.
+
+ The value is equivalent to the flags returned by VIDIOC_QUERY_DV_TIMINGS in
+ the polarities field of the v4l2_bt_timings struct.
+
+ | 0 - active low
+ | 1 - active high
+ | 2 - not available
+
+**vsync_gap_length** (RW):
+ If the incoming video signal does not contain synchronization VSYNC and
+ HSYNC pulses, these must be generated internally in the FPGA to achieve
+ the correct frame ordering. This value indicates, how many "empty" pixels
+ (pixels with deasserted Data Enable signal) are necessary to generate the
+ internal VSYNC pulse.
+
+**hsync_gap_length** (RW):
+ If the incoming video signal does not contain synchronization VSYNC and
+ HSYNC pulses, these must be generated internally in the FPGA to achieve
+ the correct frame ordering. This value indicates, how many "empty" pixels
+ (pixels with deasserted Data Enable signal) are necessary to generate the
+ internal HSYNC pulse. The value must be greater than 1 and smaller than
+ vsync_gap_length.
+
+**pclk_frequency** (R):
+ Input pixel clock frequency in kHz.
+
+ The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in
+ the pixelclock field of the v4l2_bt_timings struct.
+
+ *Note: The frequency_range parameter must be set properly first to get
+ a valid frequency here.*
+
+**hsync_width** (R):
+ Width of the HSYNC signal in PCLK clock ticks.
+
+ The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in
+ the hsync field of the v4l2_bt_timings struct.
+
+**vsync_width** (R):
+ Width of the VSYNC signal in PCLK clock ticks.
+
+ The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in
+ the vsync field of the v4l2_bt_timings struct.
+
+**hback_porch** (R):
+ Number of PCLK pulses between deassertion of the HSYNC signal and the first
+ valid pixel in the video line (marked by DE=1).
+
+ The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in
+ the hbackporch field of the v4l2_bt_timings struct.
+
+**hfront_porch** (R):
+ Number of PCLK pulses between the end of the last valid pixel in the video
+ line (marked by DE=1) and assertion of the HSYNC signal.
+
+ The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in
+ the hfrontporch field of the v4l2_bt_timings struct.
+
+**vback_porch** (R):
+ Number of video lines between deassertion of the VSYNC signal and the video
+ line with the first valid pixel (marked by DE=1).
+
+ The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in
+ the vbackporch field of the v4l2_bt_timings struct.
+
+**vfront_porch** (R):
+ Number of video lines between the end of the last valid pixel line (marked
+ by DE=1) and assertion of the VSYNC signal.
+
+ The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in
+ the vfrontporch field of the v4l2_bt_timings struct.
+
+**frequency_range** (RW)
+ PLL frequency range of the OLDI input clock generator. The PLL frequency is
+ derived from the Pixel Clock Frequency (PCLK) and is equal to PCLK if
+ oldi_lane_width is set to "single" and PCLK/2 if oldi_lane_width is set to
+ "dual".
+
+ | 0 - PLL < 50MHz (default)
+ | 1 - PLL >= 50MHz
+
+ *Note: This parameter can not be changed while the input v4l2 device is
+ open.*
+
+
+Common FPDL3/GMSL output parameters
+===================================
+
+**output_id** (R):
+ Output number ID, zero based.
+
+**video_source** (RW):
+ Output video source. If set to 0 or 1, the source is the corresponding card
+ input and the v4l2 output devices are disabled. If set to 2 or 3, the source
+ is the corresponding v4l2 video output device. The default is
+ the corresponding v4l2 output, i.e. 2 for OUT1 and 3 for OUT2.
+
+ | 0 - input 0
+ | 1 - input 1
+ | 2 - v4l2 output 0
+ | 3 - v4l2 output 1
+
+ *Note: This parameter can not be changed while ANY of the input/output v4l2
+ devices is open.*
+
+**display_width** (RW):
+ Display width. There is no autodetection of the connected display, so the
+ proper value must be set before the start of streaming. The default width
+ is 1280.
+
+ *Note: This parameter can not be changed while the output v4l2 device is
+ open.*
+
+**display_height** (RW):
+ Display height. There is no autodetection of the connected display, so the
+ proper value must be set before the start of streaming. The default height
+ is 640.
+
+ *Note: This parameter can not be changed while the output v4l2 device is
+ open.*
+
+**frame_rate** (RW):
+ Output video frame rate in frames per second. The default frame rate is
+ 60Hz.
+
+**hsync_polarity** (RW):
+ HSYNC signal polarity.
+
+ | 0 - active low (default)
+ | 1 - active high
+
+**vsync_polarity** (RW):
+ VSYNC signal polarity.
+
+ | 0 - active low (default)
+ | 1 - active high
+
+**de_polarity** (RW):
+ DE signal polarity.
+
+ | 0 - active low
+ | 1 - active high (default)
+
+**pclk_frequency** (RW):
+ Output pixel clock frequency. Allowed values are between 25000-190000(kHz)
+ and there is a non-linear stepping between two consecutive allowed
+ frequencies. The driver finds the nearest allowed frequency to the given
+ value and sets it. When reading this property, you get the exact
+ frequency set by the driver. The default frequency is 70000kHz.
+
+ *Note: This parameter can not be changed while the output v4l2 device is
+ open.*
+
+**hsync_width** (RW):
+ Width of the HSYNC signal in pixels. The default value is 16.
+
+**vsync_width** (RW):
+ Width of the VSYNC signal in video lines. The default value is 2.
+
+**hback_porch** (RW):
+ Number of PCLK pulses between deassertion of the HSYNC signal and the first
+ valid pixel in the video line (marked by DE=1). The default value is 32.
+
+**hfront_porch** (RW):
+ Number of PCLK pulses between the end of the last valid pixel in the video
+ line (marked by DE=1) and assertion of the HSYNC signal. The default value
+ is 32.
+
+**vback_porch** (RW):
+ Number of video lines between deassertion of the VSYNC signal and the video
+ line with the first valid pixel (marked by DE=1). The default value is 2.
+
+**vfront_porch** (RW):
+ Number of video lines between the end of the last valid pixel line (marked
+ by DE=1) and assertion of the VSYNC signal. The default value is 2.
+
+
+FPDL3 specific input parameters
+===============================
+
+**fpdl3_input_width** (RW):
+ Number of deserializer input lines.
+
+ | 0 - auto (default)
+ | 1 - single
+ | 2 - dual
+
+FPDL3 specific output parameters
+================================
+
+**fpdl3_output_width** (RW):
+ Number of serializer output lines.
+
+ | 0 - auto (default)
+ | 1 - single
+ | 2 - dual
+
+GMSL specific input parameters
+==============================
+
+**gmsl_mode** (RW):
+ GMSL speed mode.
+
+ | 0 - 12Gb/s (default)
+ | 1 - 6Gb/s
+ | 2 - 3Gb/s
+ | 3 - 1.5Gb/s
+
+**gmsl_stream_id** (RW):
+ The GMSL multi-stream contains up to four video streams. This parameter
+ selects which stream is captured by the video input. The value is the
+ zero-based index of the stream. The default stream id is 0.
+
+ *Note: This parameter can not be changed while the input v4l2 device is
+ open.*
+
+**gmsl_fec** (RW):
+ GMSL Forward Error Correction (FEC).
+
+ | 0 - disabled
+ | 1 - enabled (default)
+
+
+====================
+mgb4 mtd partitions
+====================
+
+The mgb4 driver creates a MTD device with two partitions:
+ - mgb4-fw.X - FPGA firmware.
+ - mgb4-data.X - Factory settings, e.g. card serial number.
+
+The *mgb4-fw* partition is writable and is used for FW updates, *mgb4-data* is
+read-only. The *X* attached to the partition name represents the card number.
+Depending on the CONFIG_MTD_PARTITIONED_MASTER kernel configuration, you may
+also have a third partition named *mgb4-flash* available in the system. This
+partition represents the whole, unpartitioned, card's FLASH memory and one should
+not fiddle with it...
+
+====================
+mgb4 iio (triggers)
+====================
+
+The mgb4 driver creates an Industrial I/O (IIO) device that provides trigger and
+signal level status capability. The following scan elements are available:
+
+**activity**:
+ The trigger levels and pending status.
+
+ | bit 1 - trigger 1 pending
+ | bit 2 - trigger 2 pending
+ | bit 5 - trigger 1 level
+ | bit 6 - trigger 2 level
+
+**timestamp**:
+ The trigger event timestamp.
+
+The iio device can operate either in "raw" mode where you can fetch the signal
+levels (activity bits 5 and 6) using sysfs access or in triggered buffer mode.
+In the triggered buffer mode you can follow the signal level changes (activity
+bits 1 and 2) using the iio device in /dev. If you enable the timestamps, you
+will also get the exact trigger event time that can be matched to a video frame
+(every mgb4 video frame has a timestamp with the same clock source).
+
+*Note: although the activity sample always contains all the status bits, it makes
+no sense to get the pending bits in raw mode or the level bits in the triggered
+buffer mode - the values do not represent valid data in such case.*
diff --git a/Documentation/admin-guide/media/pci-cardlist.rst b/Documentation/admin-guide/media/pci-cardlist.rst
index 42528795d4da..7d8e3c8987db 100644
--- a/Documentation/admin-guide/media/pci-cardlist.rst
+++ b/Documentation/admin-guide/media/pci-cardlist.rst
@@ -77,6 +77,7 @@ ipu3-cio2 Intel ipu3-cio2 driver
ivtv Conexant cx23416/cx23415 MPEG encoder/decoder
ivtvfb Conexant cx23415 framebuffer
mantis MANTIS based cards
+mgb4 Digiteq Automotive MGB4 frame grabber
mxb Siemens-Nixdorf 'Multimedia eXtension Board'
netup-unidvb NetUP Universal DVB card
ngene Micronas nGene
diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst
index 1c41f87c3917..61283d67ceef 100644
--- a/Documentation/admin-guide/media/v4l-drivers.rst
+++ b/Documentation/admin-guide/media/v4l-drivers.rst
@@ -17,6 +17,7 @@ Video4Linux (V4L) driver-specific documentation
imx7
ipu3
ivtv
+ mgb4
omap3isp
omap4_camera
philips
--
2.40.1
From: Martin Tůma <[email protected]>
Digiteq Automotive MGB4 is a modular frame grabber PCIe card for automotive
video interfaces. As for now, two modules - FPD-Link and GMSL - are
available and supported by the driver. The card has two inputs and two
outputs (FPD-Link only).
In addition to the video interfaces it also provides a trigger signal
interface and a MTD interface for FPGA firmware upload.
Signed-off-by: Martin Tůma <[email protected]>
---
MAINTAINERS | 7 +
drivers/media/pci/Kconfig | 1 +
drivers/media/pci/Makefile | 1 +
drivers/media/pci/mgb4/Kconfig | 17 +
drivers/media/pci/mgb4/Makefile | 6 +
drivers/media/pci/mgb4/mgb4_cmt.c | 244 ++++++
drivers/media/pci/mgb4/mgb4_cmt.h | 17 +
drivers/media/pci/mgb4/mgb4_core.c | 686 +++++++++++++++++
drivers/media/pci/mgb4/mgb4_core.h | 74 ++
drivers/media/pci/mgb4/mgb4_dma.c | 123 ++++
drivers/media/pci/mgb4/mgb4_dma.h | 18 +
drivers/media/pci/mgb4/mgb4_i2c.c | 140 ++++
drivers/media/pci/mgb4/mgb4_i2c.h | 35 +
drivers/media/pci/mgb4/mgb4_io.h | 33 +
drivers/media/pci/mgb4/mgb4_regs.c | 30 +
drivers/media/pci/mgb4/mgb4_regs.h | 35 +
drivers/media/pci/mgb4/mgb4_sysfs.h | 18 +
drivers/media/pci/mgb4/mgb4_sysfs_in.c | 772 +++++++++++++++++++
drivers/media/pci/mgb4/mgb4_sysfs_out.c | 737 +++++++++++++++++++
drivers/media/pci/mgb4/mgb4_sysfs_pci.c | 71 ++
drivers/media/pci/mgb4/mgb4_trigger.c | 208 ++++++
drivers/media/pci/mgb4/mgb4_trigger.h | 8 +
drivers/media/pci/mgb4/mgb4_vin.c | 939 ++++++++++++++++++++++++
drivers/media/pci/mgb4/mgb4_vin.h | 69 ++
drivers/media/pci/mgb4/mgb4_vout.c | 602 +++++++++++++++
drivers/media/pci/mgb4/mgb4_vout.h | 65 ++
26 files changed, 4956 insertions(+)
create mode 100644 drivers/media/pci/mgb4/Kconfig
create mode 100644 drivers/media/pci/mgb4/Makefile
create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.c
create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.h
create mode 100644 drivers/media/pci/mgb4/mgb4_core.c
create mode 100644 drivers/media/pci/mgb4/mgb4_core.h
create mode 100644 drivers/media/pci/mgb4/mgb4_dma.c
create mode 100644 drivers/media/pci/mgb4/mgb4_dma.h
create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.c
create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.h
create mode 100644 drivers/media/pci/mgb4/mgb4_io.h
create mode 100644 drivers/media/pci/mgb4/mgb4_regs.c
create mode 100644 drivers/media/pci/mgb4/mgb4_regs.h
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs.h
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_in.c
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_out.c
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_pci.c
create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.c
create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.h
create mode 100644 drivers/media/pci/mgb4/mgb4_vin.c
create mode 100644 drivers/media/pci/mgb4/mgb4_vin.h
create mode 100644 drivers/media/pci/mgb4/mgb4_vout.c
create mode 100644 drivers/media/pci/mgb4/mgb4_vout.h
diff --git a/MAINTAINERS b/MAINTAINERS
index c155eb535906..4b3837d92d68 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6075,6 +6075,13 @@ L: [email protected]
S: Maintained
F: drivers/gpio/gpio-gpio-mm.c
+DIGITEQ AUTOMOTIVE MGB4 V4L2 DRIVER
+M: Martin Tuma <[email protected]>
+L: [email protected]
+S: Maintained
+F: Documentation/admin-guide/media/mgb4.rst
+F: drivers/media/pci/mgb4/
+
DIOLAN U2C-12 I2C DRIVER
M: Guenter Roeck <[email protected]>
L: [email protected]
diff --git a/drivers/media/pci/Kconfig b/drivers/media/pci/Kconfig
index ee095bde0b68..7f65aa609388 100644
--- a/drivers/media/pci/Kconfig
+++ b/drivers/media/pci/Kconfig
@@ -13,6 +13,7 @@ if MEDIA_PCI_SUPPORT
if MEDIA_CAMERA_SUPPORT
comment "Media capture support"
+source "drivers/media/pci/mgb4/Kconfig"
source "drivers/media/pci/solo6x10/Kconfig"
source "drivers/media/pci/sta2x11/Kconfig"
source "drivers/media/pci/tw5864/Kconfig"
diff --git a/drivers/media/pci/Makefile b/drivers/media/pci/Makefile
index 8bed619b7130..f18c7e15abe3 100644
--- a/drivers/media/pci/Makefile
+++ b/drivers/media/pci/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_VIDEO_CX25821) += cx25821/
obj-$(CONFIG_VIDEO_CX88) += cx88/
obj-$(CONFIG_VIDEO_DT3155) += dt3155/
obj-$(CONFIG_VIDEO_IVTV) += ivtv/
+obj-$(CONFIG_VIDEO_MGB4) += mgb4/
obj-$(CONFIG_VIDEO_SAA7134) += saa7134/
obj-$(CONFIG_VIDEO_SAA7164) += saa7164/
obj-$(CONFIG_VIDEO_SOLO6X10) += solo6x10/
diff --git a/drivers/media/pci/mgb4/Kconfig b/drivers/media/pci/mgb4/Kconfig
new file mode 100644
index 000000000000..13fad15a434c
--- /dev/null
+++ b/drivers/media/pci/mgb4/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config VIDEO_MGB4
+ tristate "Digiteq Automotive MGB4 support"
+ depends on VIDEO_DEV && PCI && I2C && DMADEVICES && SPI && MTD && IIO
+ select VIDEOBUF2_DMA_SG
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ select I2C_XILINX
+ select SPI_XILINX
+ select MTD_SPI_NOR
+ select XILINX_XDMA
+ help
+ This is a video4linux driver for Digiteq Automotive MGB4 grabber
+ cards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mgb4.
diff --git a/drivers/media/pci/mgb4/Makefile b/drivers/media/pci/mgb4/Makefile
new file mode 100644
index 000000000000..e92ead18bed0
--- /dev/null
+++ b/drivers/media/pci/mgb4/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+mgb4-objs := mgb4_regs.o mgb4_core.o mgb4_vin.o mgb4_vout.o \
+ mgb4_sysfs_pci.o mgb4_sysfs_in.o mgb4_sysfs_out.o \
+ mgb4_i2c.o mgb4_cmt.o mgb4_trigger.o mgb4_dma.o
+
+obj-$(CONFIG_VIDEO_MGB4) += mgb4.o
diff --git a/drivers/media/pci/mgb4/mgb4_cmt.c b/drivers/media/pci/mgb4/mgb4_cmt.c
new file mode 100644
index 000000000000..70dc78ef193c
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_cmt.c
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021-2023 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ *
+ * The CMT module configures the FPGA Clock Management Tile (CMT) registers. For
+ * different video signal frequencies (FPGA input signal frequencies), the FPGA
+ * CMT registers need to be adjusted for the FPGA to work properly. The values
+ * are precomputed based on formulas given by Xilinx in their FPGA documentation
+ * (which are in turn full of some magic values/tables...).
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include "mgb4_core.h"
+#include "mgb4_cmt.h"
+
+static const u16 cmt_vals_out[][15] = {
+ {0x1208, 0x0000, 0x171C, 0x0000, 0x1E38, 0x0000, 0x11C7, 0x0000, 0x1041, 0x01BC, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
+ {0x11C7, 0x0000, 0x1619, 0x0080, 0x1C71, 0x0000, 0x130D, 0x0080, 0x0041, 0x0090, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x9000, },
+ {0x11C7, 0x0000, 0x1619, 0x0080, 0x1C71, 0x0000, 0x165A, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
+ {0x11C7, 0x0000, 0x1619, 0x0080, 0x1C71, 0x0000, 0x1187, 0x0080, 0x1041, 0x01EE, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
+ {0x1186, 0x0000, 0x1555, 0x0000, 0x1AAA, 0x0000, 0x1451, 0x0000, 0x0042, 0x0013, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x11C7, 0x0000, 0x1619, 0x0080, 0x1C71, 0x0000, 0x134E, 0x0080, 0x0041, 0x005E, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x1619, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
+ {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x179E, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x179F, 0x0080, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x17DF, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x8800, },
+ {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x128B, 0x0080, 0x0041, 0x00DB, 0x7C01, 0x7DE9, 0xFFFF, 0x9000, 0x0100, },
+ {0x1186, 0x0000, 0x1555, 0x0000, 0x1AAA, 0x0000, 0x1820, 0x0000, 0x0083, 0x00FA, 0x7DE9, 0x7DE8, 0xFFFF, 0x0900, 0x9000, },
+ {0x1186, 0x0000, 0x1555, 0x0000, 0x1AAA, 0x0000, 0x1187, 0x0080, 0x1041, 0x01EE, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x169B, 0x0080, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1800, 0x0100, },
+ {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x171C, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
+ {0x1186, 0x0000, 0x1555, 0x0000, 0x1AAA, 0x0000, 0x1515, 0x0080, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x1493, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x15D8, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1900, 0x0100, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x124A, 0x0080, 0x0041, 0x010D, 0x7C01, 0x7DE9, 0xFFFF, 0x9000, 0x0100, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x175D, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x1619, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
+ {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x17DF, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x8800, },
+ {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x17E0, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x9000, },
+ {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x1820, 0x0000, 0x0083, 0x00FA, 0x7DE9, 0x7DE8, 0xFFFF, 0x0900, 0x9000, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x13D0, 0x0080, 0x0042, 0x002C, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x128B, 0x0080, 0x0041, 0x00DB, 0x7C01, 0x7DE9, 0xFFFF, 0x9000, 0x0100, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x1820, 0x0000, 0x00C3, 0x00FA, 0x7DE9, 0x7DE8, 0xFFFF, 0x0900, 0x9000, },
+ {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x134E, 0x0080, 0x0041, 0x005E, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x1515, 0x0080, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x175D, 0x0000, 0x00C4, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x11C7, 0x0000, 0x1041, 0x01BC, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1209, 0x0080, 0x0041, 0x013F, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x1100, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1556, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x8000, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x179F, 0x0080, 0x00C4, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x15D8, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1900, 0x0100, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1105, 0x0080, 0x1041, 0x01E8, 0x6401, 0x65E9, 0xFFFF, 0x9800, 0x1100, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1820, 0x0000, 0x00C4, 0x00FA, 0x7DE9, 0x7DE8, 0xFFFF, 0x0900, 0x9000, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x1493, 0x0080, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x138E, 0x0000, 0x0042, 0x005E, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x17E0, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x9000, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x165A, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x175D, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x1187, 0x0080, 0x1041, 0x01EE, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x175E, 0x0080, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x179E, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x134E, 0x0080, 0x0041, 0x005E, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x165A, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x16DC, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x169A, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x11C7, 0x0000, 0x1041, 0x01BC, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x169B, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1800, 0x0100, },
+ {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x171D, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x16DB, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1800, 0x0100, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1146, 0x0080, 0x1041, 0x0184, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x171C, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1451, 0x0000, 0x0042, 0x0013, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x171D, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x175D, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1452, 0x0080, 0x0042, 0x0013, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x15D8, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1900, 0x0100, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1104, 0x0000, 0x1041, 0x01E8, 0x5801, 0x59E9, 0xFFFF, 0x9900, 0x0900, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x179F, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1515, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x17DF, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x8800, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1659, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1555, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x8000, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x14D3, 0x0000, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1820, 0x0000, 0x0083, 0x00FA, 0x7DE9, 0x7DE8, 0xFFFF, 0x0900, 0x9000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1556, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x8000, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1187, 0x0080, 0x1041, 0x01EE, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1452, 0x0080, 0x0082, 0x0013, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x169B, 0x0080, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1800, 0x0100, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1514, 0x0000, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x17E0, 0x0080, 0x00C4, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x9000, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1515, 0x0080, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x16DC, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1493, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x15D8, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1900, 0x0100, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x171D, 0x0080, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1618, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1900, 0x0100, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x175D, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x14D4, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1619, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x179E, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x179F, 0x0080, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1515, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x13D0, 0x0080, 0x0042, 0x002C, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x169A, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x128B, 0x0080, 0x0041, 0x00DB, 0x7C01, 0x7DE9, 0xFFFF, 0x9000, 0x0100, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x169B, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1800, 0x0100, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1820, 0x0000, 0x00C3, 0x00FA, 0x7DE9, 0x7DE8, 0xFFFF, 0x0900, 0x9000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1556, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x8000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x16DB, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1800, 0x0100, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1411, 0x0080, 0x0042, 0x002C, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1597, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x8000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1451, 0x0000, 0x0042, 0x0013, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x171D, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x12CC, 0x0080, 0x0041, 0x00A9, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x9000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x175D, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1452, 0x0080, 0x0042, 0x0013, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x15D8, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1900, 0x0100, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x175E, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1492, 0x0000, 0x0042, 0x0013, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x179F, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1619, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1493, 0x0080, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x17DF, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x8800, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x130D, 0x0080, 0x0041, 0x0090, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x9000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x17E0, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x9000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x14D3, 0x0000, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x165A, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1820, 0x0000, 0x0083, 0x00FA, 0x7DE9, 0x7DE8, 0xFFFF, 0x0900, 0x9000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x14D4, 0x0080, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
+ {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x169B, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1800, 0x0100, },
+};
+
+static const u16 cmt_vals_in[][13] = {
+ {0x1082, 0x0000, 0x5104, 0x0000, 0x11C7, 0x0000, 0x1041, 0x02BC, 0x7C01, 0xFFE9, 0x9900, 0x9908, 0x8100},
+ {0x1104, 0x0000, 0x9208, 0x0000, 0x138E, 0x0000, 0x1041, 0x015E, 0x7C01, 0xFFE9, 0x0100, 0x0908, 0x1000},
+};
+
+static const u32 cmt_addrs_out[][15] = {
+ {0x420, 0x424, 0x428, 0x42C, 0x430, 0x434, 0x450, 0x454, 0x458, 0x460, 0x464, 0x468, 0x4A0, 0x538, 0x53C},
+ {0x620, 0x624, 0x628, 0x62C, 0x630, 0x634, 0x650, 0x654, 0x658, 0x660, 0x664, 0x668, 0x6A0, 0x738, 0x73C},
+};
+
+static const u32 cmt_addrs_in[][13] = {
+ {0x020, 0x024, 0x028, 0x02C, 0x050, 0x054, 0x058, 0x060, 0x064, 0x068, 0x0A0, 0x138, 0x13C},
+ {0x220, 0x224, 0x228, 0x22C, 0x250, 0x254, 0x258, 0x260, 0x264, 0x268, 0x2A0, 0x338, 0x33C},
+};
+
+static const u32 cmt_freq[] = {
+ 25000, 25510, 26020, 26530, 26983, 27551, 28000, 28570,
+ 29046, 29522, 30000, 30476, 30952, 31546, 32000, 32539,
+ 33035, 33571, 33928, 34522, 35000, 35428, 36000, 36571,
+ 36904, 37500, 38093, 38571, 39047, 39453, 40000, 40476,
+ 40952, 41494, 41964, 42857, 43535, 44047, 44444, 45000,
+ 45535, 46029, 46428, 46823, 47617, 48214, 48571, 49107,
+ 49523, 50000, 50476, 50892, 51428, 52380, 53333, 53967,
+ 54285, 55238, 55555, 55952, 57142, 58095, 58571, 59047,
+ 59521, 60000, 60316, 60952, 61428, 61904, 62500, 63092,
+ 63491, 64282, 65078, 65476, 66071, 66664, 67142, 67854,
+ 68571, 69044, 69642, 70000, 71425, 72616, 73214, 73808,
+ 74285, 75000, 75714, 76187, 76785, 77142, 78570, 80000,
+ 80357, 80951, 81428, 82142, 82857, 83332, 83928, 84285,
+ 85713, 87142, 87500, 88094, 88571, 89285, 90000, 90475,
+ 91071, 91428, 92856, 94642,
+};
+
+static size_t freq_srch(u32 key, const u32 *array, size_t size)
+{
+ int l = 0;
+ int r = size - 1;
+ int m = 0;
+
+ while (l <= r) {
+ m = (l + r) / 2;
+ if (array[m] < key)
+ l = m + 1;
+ else if (array[m] > key)
+ r = m - 1;
+ else
+ return m;
+ }
+
+ if (r < 0 || l > size - 1)
+ return m;
+ else
+ return (abs(key - array[l]) < abs(key - array[r])) ? l : r;
+}
+
+u32 mgb4_cmt_set_vout_freq(struct mgb4_vout_dev *voutdev, unsigned int freq)
+{
+ struct mgb4_regs *video = &voutdev->mgbdev->video;
+ const struct mgb4_vout_regs *regs = &voutdev->config->regs;
+ const u16 *reg_set;
+ const u32 *addr;
+ u32 config;
+ size_t i, index;
+
+ index = freq_srch(freq, cmt_freq, ARRAY_SIZE(cmt_freq));
+ addr = cmt_addrs_out[voutdev->config->id];
+ reg_set = cmt_vals_out[index];
+
+ config = mgb4_read_reg(video, regs->config);
+
+ mgb4_write_reg(video, regs->config, 0x1 | (config & ~0x3));
+
+ for (i = 0; i < ARRAY_SIZE(cmt_addrs_out[0]); i++)
+ mgb4_write_reg(&voutdev->mgbdev->cmt, addr[i], reg_set[i]);
+
+ mgb4_mask_reg(video, regs->config, 0x100, 0x100);
+ mgb4_mask_reg(video, regs->config, 0x100, 0x0);
+
+ mgb4_write_reg(video, regs->config, config & ~0x1);
+
+ return cmt_freq[index];
+}
+
+void mgb4_cmt_set_vin_freq_range(struct mgb4_vin_dev *vindev,
+ unsigned int freq_range)
+{
+ struct mgb4_regs *video = &vindev->mgbdev->video;
+ const struct mgb4_vin_regs *regs = &vindev->config->regs;
+ const u16 *reg_set;
+ const u32 *addr;
+ u32 config;
+ size_t i;
+
+ addr = cmt_addrs_in[vindev->config->id];
+ reg_set = cmt_vals_in[freq_range];
+
+ config = mgb4_read_reg(video, regs->config);
+
+ mgb4_write_reg(video, regs->config, 0x1 | (config & ~0x3));
+
+ for (i = 0; i < ARRAY_SIZE(cmt_addrs_in[0]); i++)
+ mgb4_write_reg(&vindev->mgbdev->cmt, addr[i], reg_set[i]);
+
+ mgb4_mask_reg(video, regs->config, 0x1000, 0x1000);
+ mgb4_mask_reg(video, regs->config, 0x1000, 0x0);
+
+ mgb4_write_reg(video, regs->config, config & ~0x1);
+}
diff --git a/drivers/media/pci/mgb4/mgb4_cmt.h b/drivers/media/pci/mgb4/mgb4_cmt.h
new file mode 100644
index 000000000000..b15df56ca059
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_cmt.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021-2023 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ */
+
+#ifndef __MGB4_CMT_H__
+#define __MGB4_CMT_H__
+
+#include "mgb4_vout.h"
+#include "mgb4_vin.h"
+
+u32 mgb4_cmt_set_vout_freq(struct mgb4_vout_dev *voutdev, unsigned int freq);
+void mgb4_cmt_set_vin_freq_range(struct mgb4_vin_dev *vindev,
+ unsigned int freq_range);
+
+#endif
diff --git a/drivers/media/pci/mgb4/mgb4_core.c b/drivers/media/pci/mgb4/mgb4_core.c
new file mode 100644
index 000000000000..3efb33fbf40c
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_core.c
@@ -0,0 +1,686 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This is the driver for the MGB4 video grabber card by Digiteq Automotive.
+ *
+ * Copyright (C) 2021-2023 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ *
+ * This is the main driver module. The DMA, I2C and SPI sub-drivers are
+ * initialized here and the input/output v4l2 devices are created.
+ *
+ * The mgb4 card uses different expansion modules for different video sources
+ * (GMSL and FPDL3 for now) so in probe() we detect the module type based on
+ * what we see on the I2C bus and check if it matches the FPGA bitstream (there
+ * are different bitstreams for different expansion modules). When no expansion
+ * module is present, we still let the driver initialize to allow flashing of
+ * the FPGA firmware using the SPI FLASH device. No v4l2 video devices are
+ * created in this case.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/dma/amd_xdma.h>
+#include <linux/platform_data/amd_xdma.h>
+#include <linux/spi/xilinx_spi.h>
+#include <linux/mtd/mtd.h>
+#include <linux/hwmon.h>
+#include <linux/debugfs.h>
+#include "mgb4_dma.h"
+#include "mgb4_i2c.h"
+#include "mgb4_sysfs.h"
+#include "mgb4_vout.h"
+#include "mgb4_vin.h"
+#include "mgb4_trigger.h"
+#include "mgb4_core.h"
+
+#define MGB4_USER_IRQS 16
+
+ATTRIBUTE_GROUPS(mgb4_pci);
+
+static int flashid;
+
+static struct xdma_chan_info h2c_chan_info = {
+ .dir = DMA_MEM_TO_DEV,
+};
+
+static struct xdma_chan_info c2h_chan_info = {
+ .dir = DMA_DEV_TO_MEM,
+};
+
+static struct xspi_platform_data spi_platform_data = {
+ .num_chipselect = 1,
+ .bits_per_word = 8
+};
+
+static const struct i2c_board_info extender_info = {
+ I2C_BOARD_INFO("extender", 0x21)
+};
+
+#if IS_REACHABLE(CONFIG_HWMON)
+static umode_t temp_is_visible(const void *data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ if (type == hwmon_temp &&
+ (attr == hwmon_temp_input || attr == hwmon_temp_label))
+ return 0444;
+ else
+ return 0;
+}
+
+static int temp_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+ int channel, long *val)
+{
+ struct mgb4_dev *mgbdev = dev_get_drvdata(dev);
+ u32 val10, raw;
+
+ if (type != hwmon_temp || attr != hwmon_temp_input)
+ return -EOPNOTSUPP;
+
+ raw = mgb4_read_reg(&mgbdev->video, 0xD0);
+ /* register value -> Celsius degrees formula given by Xilinx */
+ val10 = ((((raw >> 20) & 0xFFF) * 503975) - 1118822400) / 409600;
+ *val = val10 * 100;
+
+ return 0;
+}
+
+static int temp_read_string(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ if (type != hwmon_temp || attr != hwmon_temp_label)
+ return -EOPNOTSUPP;
+
+ *str = "FPGA Temperature";
+
+ return 0;
+}
+
+static const struct hwmon_ops temp_ops = {
+ .is_visible = temp_is_visible,
+ .read = temp_read,
+ .read_string = temp_read_string
+};
+
+static const struct hwmon_channel_info *temp_channel_info[] = {
+ HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
+ NULL
+};
+
+static const struct hwmon_chip_info temp_chip_info = {
+ .ops = &temp_ops,
+ .info = temp_channel_info,
+};
+#endif
+
+static int match_i2c_adap(struct device *dev, void *data)
+{
+ return i2c_verify_adapter(dev) ? 1 : 0;
+}
+
+static struct i2c_adapter *get_i2c_adap(struct platform_device *pdev)
+{
+ struct device *dev;
+
+ mutex_lock(&pdev->dev.mutex);
+ dev = device_find_child(&pdev->dev, NULL, match_i2c_adap);
+ mutex_unlock(&pdev->dev.mutex);
+
+ return dev ? to_i2c_adapter(dev) : NULL;
+}
+
+static int match_spi_adap(struct device *dev, void *data)
+{
+ return to_spi_device(dev) ? 1 : 0;
+}
+
+static struct spi_master *get_spi_adap(struct platform_device *pdev)
+{
+ struct device *dev;
+
+ mutex_lock(&pdev->dev.mutex);
+ dev = device_find_child(&pdev->dev, NULL, match_spi_adap);
+ mutex_unlock(&pdev->dev.mutex);
+
+ return dev ? container_of(dev, struct spi_master, dev) : NULL;
+}
+
+static int init_spi(struct mgb4_dev *mgbdev)
+{
+ struct resource spi_resources[] = {
+ {
+ .start = 0x400,
+ .end = 0x47f,
+ .flags = IORESOURCE_MEM,
+ .name = "io-memory",
+ },
+ {
+ .start = 14,
+ .end = 14,
+ .flags = IORESOURCE_IRQ,
+ .name = "irq",
+ },
+ };
+ struct spi_board_info spi_info = {
+ .max_speed_hz = 10000000,
+ .modalias = "m25p80",
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ };
+ struct pci_dev *pdev = mgbdev->pdev;
+ struct device *dev = &pdev->dev;
+ struct spi_master *master;
+ struct spi_device *spi_dev;
+ u32 irq;
+ int rv, id;
+ resource_size_t mapbase = pci_resource_start(pdev, MGB4_MGB4_BAR_ID);
+
+ request_module("platform:xilinx_spi");
+
+ irq = xdma_get_user_irq(mgbdev->xdev, 14);
+ xdma_enable_user_irq(mgbdev->xdev, irq);
+
+ spi_resources[0].parent = &pdev->resource[MGB4_MGB4_BAR_ID];
+ spi_resources[0].start += mapbase;
+ spi_resources[0].end += mapbase;
+ spi_resources[1].start = irq;
+ spi_resources[1].end = irq;
+
+ id = pci_dev_id(pdev);
+ mgbdev->spi_pdev = platform_device_register_resndata(dev, "xilinx_spi",
+ id, spi_resources,
+ ARRAY_SIZE(spi_resources),
+ &spi_platform_data,
+ sizeof(spi_platform_data));
+ if (IS_ERR(mgbdev->spi_pdev)) {
+ dev_err(dev, "failed to register SPI device\n");
+ return PTR_ERR(mgbdev->spi_pdev);
+ }
+
+ master = get_spi_adap(mgbdev->spi_pdev);
+ if (!master) {
+ dev_err(dev, "failed to get SPI adapter\n");
+ rv = -EINVAL;
+ goto err_pdev;
+ }
+
+ snprintf(mgbdev->fw_part_name, sizeof(mgbdev->fw_part_name),
+ "mgb4-fw.%d", flashid);
+ mgbdev->partitions[0].name = mgbdev->fw_part_name;
+ mgbdev->partitions[0].size = 0x400000;
+ mgbdev->partitions[0].offset = 0x400000;
+ mgbdev->partitions[0].mask_flags = 0;
+
+ snprintf(mgbdev->data_part_name, sizeof(mgbdev->data_part_name),
+ "mgb4-data.%d", flashid);
+ mgbdev->partitions[1].name = mgbdev->data_part_name;
+ mgbdev->partitions[1].size = 0x10000;
+ mgbdev->partitions[1].offset = 0xFF0000;
+ mgbdev->partitions[1].mask_flags = MTD_CAP_NORFLASH;
+
+ snprintf(mgbdev->flash_name, sizeof(mgbdev->flash_name),
+ "mgb4-flash.%d", flashid);
+ mgbdev->flash_data.name = mgbdev->flash_name;
+ mgbdev->flash_data.parts = mgbdev->partitions;
+ mgbdev->flash_data.nr_parts = ARRAY_SIZE(mgbdev->partitions);
+ mgbdev->flash_data.type = "spi-nor";
+
+ spi_info.platform_data = &mgbdev->flash_data;
+
+ spi_dev = spi_new_device(master, &spi_info);
+ put_device(&master->dev);
+ if (!spi_dev) {
+ dev_err(dev, "failed to create MTD device\n");
+ rv = -EINVAL;
+ goto err_pdev;
+ }
+
+ return 0;
+
+err_pdev:
+ platform_device_unregister(mgbdev->spi_pdev);
+
+ return rv;
+}
+
+static void free_spi(struct mgb4_dev *mgbdev)
+{
+ platform_device_unregister(mgbdev->spi_pdev);
+}
+
+static int init_i2c(struct mgb4_dev *mgbdev)
+{
+ struct resource i2c_resources[] = {
+ {
+ .start = 0x200,
+ .end = 0x3ff,
+ .flags = IORESOURCE_MEM,
+ .name = "io-memory",
+ },
+ {
+ .start = 15,
+ .end = 15,
+ .flags = IORESOURCE_IRQ,
+ .name = "irq",
+ },
+ };
+ struct pci_dev *pdev = mgbdev->pdev;
+ struct device *dev = &pdev->dev;
+ char clk_name[16];
+ u32 irq;
+ int rv, id;
+ resource_size_t mapbase = pci_resource_start(pdev, MGB4_MGB4_BAR_ID);
+
+ request_module("platform:xiic-i2c");
+
+ irq = xdma_get_user_irq(mgbdev->xdev, 15);
+ xdma_enable_user_irq(mgbdev->xdev, irq);
+
+ i2c_resources[0].parent = &pdev->resource[MGB4_MGB4_BAR_ID];
+ i2c_resources[0].start += mapbase;
+ i2c_resources[0].end += mapbase;
+ i2c_resources[1].start = irq;
+ i2c_resources[1].end = irq;
+
+ id = pci_dev_id(pdev);
+
+ /* create dummy clock required by the xiic-i2c adapter */
+ snprintf(clk_name, sizeof(clk_name), "xiic-i2c.%d", id);
+ mgbdev->i2c_clk = clk_hw_register_fixed_rate(NULL, clk_name, NULL,
+ 0, 125000000);
+ if (IS_ERR(mgbdev->i2c_clk)) {
+ dev_err(dev, "failed to register I2C clock\n");
+ return PTR_ERR(mgbdev->i2c_clk);
+ }
+ mgbdev->i2c_cl = clkdev_hw_create(mgbdev->i2c_clk, NULL, "xiic-i2c.%d",
+ id);
+ if (!mgbdev->i2c_cl) {
+ dev_err(dev, "failed to register I2C clockdev\n");
+ rv = -ENOMEM;
+ goto err_clk;
+ }
+
+ mgbdev->i2c_pdev = platform_device_register_resndata(dev, "xiic-i2c",
+ id, i2c_resources,
+ ARRAY_SIZE(i2c_resources),
+ NULL, 0);
+ if (IS_ERR(mgbdev->i2c_pdev)) {
+ dev_err(dev, "failed to register I2C device\n");
+ rv = PTR_ERR(mgbdev->i2c_pdev);
+ goto err_clkdev;
+ }
+
+ mgbdev->i2c_adap = get_i2c_adap(mgbdev->i2c_pdev);
+ if (!mgbdev->i2c_adap) {
+ dev_err(dev, "failed to get I2C adapter\n");
+ rv = -EINVAL;
+ goto err_pdev;
+ }
+
+ mutex_init(&mgbdev->i2c_lock);
+
+ return 0;
+
+err_pdev:
+ platform_device_unregister(mgbdev->i2c_pdev);
+err_clkdev:
+ clkdev_drop(mgbdev->i2c_cl);
+err_clk:
+ clk_hw_unregister(mgbdev->i2c_clk);
+
+ return rv;
+}
+
+static void free_i2c(struct mgb4_dev *mgbdev)
+{
+ put_device(&mgbdev->i2c_adap->dev);
+ platform_device_unregister(mgbdev->i2c_pdev);
+ clkdev_drop(mgbdev->i2c_cl);
+ clk_hw_unregister(mgbdev->i2c_clk);
+}
+
+static int get_serial_number(struct mgb4_dev *mgbdev)
+{
+ struct device *dev = &mgbdev->pdev->dev;
+ struct mtd_info *mtd;
+ size_t rs;
+ int rv;
+
+ mgbdev->serial_number = 0;
+
+ mtd = get_mtd_device_nm(mgbdev->data_part_name);
+ if (IS_ERR(mtd)) {
+ dev_warn(dev, "failed to get data MTD device\n");
+ return -ENOENT;
+ }
+ rv = mtd_read(mtd, 0, sizeof(mgbdev->serial_number), &rs,
+ (u_char *)&mgbdev->serial_number);
+ put_mtd_device(mtd);
+ if (rv < 0 || rs != sizeof(mgbdev->serial_number)) {
+ dev_warn(dev, "error reading MTD device\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int get_module_version(struct mgb4_dev *mgbdev)
+{
+ struct device *dev = &mgbdev->pdev->dev;
+ struct mgb4_i2c_client extender;
+ s32 version;
+ u32 fw_version;
+ int rv;
+
+ rv = mgb4_i2c_init(&extender, mgbdev->i2c_adap, &extender_info, 8);
+ if (rv < 0) {
+ dev_err(dev, "failed to create extender I2C device\n");
+ return rv;
+ }
+ version = mgb4_i2c_read_byte(&extender, 0x00);
+ mgb4_i2c_free(&extender);
+ if (version < 0) {
+ dev_err(dev, "error reading module version\n");
+ return -EIO;
+ }
+
+ mgbdev->module_version = ~((u32)version) & 0xff;
+ if (!(MGB4_IS_FPDL3(mgbdev) || MGB4_IS_GMSL(mgbdev))) {
+ dev_err(dev, "unknown module type\n");
+ return -EINVAL;
+ }
+ fw_version = mgb4_read_reg(&mgbdev->video, 0xC4);
+ if (fw_version >> 24 != mgbdev->module_version >> 4) {
+ dev_err(dev, "module/firmware type mismatch\n");
+ return -EINVAL;
+ }
+
+ dev_info(dev, "%s module detected\n",
+ MGB4_IS_FPDL3(mgbdev) ? "FPDL3" : "GMSL");
+
+ return 0;
+}
+
+static int map_regs(struct pci_dev *pdev, struct resource *res,
+ struct mgb4_regs *regs)
+{
+ int rv;
+ resource_size_t mapbase = pci_resource_start(pdev, MGB4_MGB4_BAR_ID);
+
+ res->start += mapbase;
+ res->end += mapbase;
+
+ rv = mgb4_regs_map(res, regs);
+ if (rv < 0) {
+ dev_err(&pdev->dev, "failed to map %s registers\n", res->name);
+ return rv;
+ }
+
+ return 0;
+}
+
+static int init_xdma(struct mgb4_dev *mgbdev)
+{
+ struct xdma_platdata data;
+ struct resource res[2] = { 0 };
+ struct dma_slave_map *map;
+ struct pci_dev *pdev = mgbdev->pdev;
+ struct device *dev = &pdev->dev;
+ int i;
+
+ res[0].start = pci_resource_start(pdev, MGB4_XDMA_BAR_ID);
+ res[0].end = pci_resource_end(pdev, MGB4_XDMA_BAR_ID);
+ res[0].flags = IORESOURCE_MEM;
+ res[0].parent = &pdev->resource[MGB4_XDMA_BAR_ID];
+ res[1].start = pci_irq_vector(pdev, 0);
+ res[1].end = res[1].start + MGB4_VIN_DEVICES + MGB4_VOUT_DEVICES
+ + MGB4_USER_IRQS - 1;
+ res[1].flags = IORESOURCE_IRQ;
+
+ data.max_dma_channels = MGB4_VIN_DEVICES + MGB4_VOUT_DEVICES;
+ data.device_map = mgbdev->slave_map;
+ data.device_map_cnt = MGB4_VIN_DEVICES + MGB4_VOUT_DEVICES;
+
+ for (i = 0; i < MGB4_VIN_DEVICES; i++) {
+ sprintf(mgbdev->channel_names[i], "c2h%d", i);
+ map = &data.device_map[i];
+ map->slave = mgbdev->channel_names[i];
+ map->devname = dev_name(dev);
+ map->param = XDMA_FILTER_PARAM(&c2h_chan_info);
+ }
+ for (i = 0; i < MGB4_VOUT_DEVICES; i++) {
+ sprintf(mgbdev->channel_names[i + MGB4_VIN_DEVICES], "h2c%d", i);
+ map = &data.device_map[i + MGB4_VIN_DEVICES];
+ map->slave = mgbdev->channel_names[i + MGB4_VIN_DEVICES];
+ map->devname = dev_name(dev);
+ map->param = XDMA_FILTER_PARAM(&h2c_chan_info);
+ }
+
+ mgbdev->xdev = platform_device_register_resndata(dev, "xdma",
+ PLATFORM_DEVID_AUTO, res,
+ 2, &data, sizeof(data));
+ if (IS_ERR(mgbdev->xdev)) {
+ dev_err(dev, "failed to register XDMA device\n");
+ return PTR_ERR(mgbdev->xdev);
+ }
+
+ return 0;
+}
+
+static void free_xdma(struct mgb4_dev *mgbdev)
+{
+ platform_device_unregister(mgbdev->xdev);
+}
+
+static int mgb4_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ int i, rv;
+ struct mgb4_dev *mgbdev;
+ struct resource video = {
+ .start = 0x0,
+ .end = 0x100,
+ .flags = IORESOURCE_MEM,
+ .name = "mgb4-video",
+ };
+ struct resource cmt = {
+ .start = 0x1000,
+ .end = 0x1800,
+ .flags = IORESOURCE_MEM,
+ .name = "mgb4-cmt",
+ };
+ int irqs = pci_msix_vec_count(pdev);
+
+ mgbdev = kzalloc(sizeof(*mgbdev), GFP_KERNEL);
+ if (!mgbdev)
+ return -ENOMEM;
+
+ mgbdev->pdev = pdev;
+ pci_set_drvdata(pdev, mgbdev);
+
+ /* PCIe related stuff */
+ rv = pci_enable_device(pdev);
+ if (rv) {
+ dev_err(&pdev->dev, "error enabling PCI device\n");
+ goto err_mgbdev;
+ }
+
+ rv = pcie_capability_set_word(pdev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
+ if (rv)
+ dev_warn(&pdev->dev, "error enabling PCIe relaxed ordering\n");
+ rv = pcie_capability_set_word(pdev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_EXT_TAG);
+ if (rv)
+ dev_warn(&pdev->dev, "error enabling PCIe extended tag field\n");
+ rv = pcie_set_readrq(pdev, 512);
+ if (rv)
+ dev_warn(&pdev->dev, "error setting PCIe max. memory read size\n");
+ pci_set_master(pdev);
+
+ rv = pci_alloc_irq_vectors(pdev, irqs, irqs, PCI_IRQ_MSIX);
+ if (rv < 0) {
+ dev_err(&pdev->dev, "error allocating MSI-X IRQs\n");
+ goto err_enable_pci;
+ }
+
+ rv = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (rv) {
+ dev_err(&pdev->dev, "error setting DMA mask\n");
+ goto err_enable_pci;
+ }
+
+ /* DMA + IRQ engine */
+ rv = init_xdma(mgbdev);
+ if (rv)
+ goto err_alloc_irq;
+ rv = mgb4_dma_channel_init(mgbdev);
+ if (rv)
+ goto err_dma_chan;
+
+ /* mgb4 video registers */
+ rv = map_regs(pdev, &video, &mgbdev->video);
+ if (rv < 0)
+ goto err_dma_chan;
+ /* mgb4 cmt registers */
+ rv = map_regs(pdev, &cmt, &mgbdev->cmt);
+ if (rv < 0)
+ goto err_video_regs;
+
+ /* SPI FLASH */
+ rv = init_spi(mgbdev);
+ if (rv < 0)
+ goto err_cmt_regs;
+
+ /* I2C controller */
+ rv = init_i2c(mgbdev);
+ if (rv < 0)
+ goto err_spi;
+
+ /* PCI card related sysfs attributes */
+ rv = device_add_groups(&pdev->dev, mgb4_pci_groups);
+ if (rv < 0)
+ goto err_i2c;
+
+#if IS_REACHABLE(CONFIG_HWMON)
+ /* HWmon (card temperature) */
+ mgbdev->hwmon_dev = hwmon_device_register_with_info(&pdev->dev, "mgb4",
+ mgbdev,
+ &temp_chip_info,
+ NULL);
+#endif
+
+#ifdef CONFIG_DEBUG_FS
+ mgbdev->debugfs = debugfs_create_dir(dev_name(&pdev->dev), NULL);
+#endif
+
+ /* Get card serial number. On systems without MTD flash support we may
+ * get an error thus ignore the return value. An invalid serial number
+ * should not break anything...
+ */
+ if (get_serial_number(mgbdev) < 0)
+ dev_warn(&pdev->dev, "error reading card serial number\n");
+
+ /* Get module type. If no valid module is found, skip the video device
+ * creation part but do not exit with error to allow flashing the card.
+ */
+ rv = get_module_version(mgbdev);
+ if (rv < 0)
+ goto exit;
+
+ /* Video input v4l2 devices */
+ for (i = 0; i < MGB4_VIN_DEVICES; i++)
+ mgbdev->vin[i] = mgb4_vin_create(mgbdev, i);
+
+ /* Video output v4l2 devices */
+ for (i = 0; i < MGB4_VOUT_DEVICES; i++)
+ mgbdev->vout[i] = mgb4_vout_create(mgbdev, i);
+
+ /* Triggers */
+ mgbdev->indio_dev = mgb4_trigger_create(mgbdev);
+
+exit:
+ flashid++;
+
+ return 0;
+
+err_i2c:
+ free_i2c(mgbdev);
+err_spi:
+ free_spi(mgbdev);
+err_cmt_regs:
+ mgb4_regs_free(&mgbdev->cmt);
+err_video_regs:
+ mgb4_regs_free(&mgbdev->video);
+err_dma_chan:
+ mgb4_dma_channel_free(mgbdev);
+ free_xdma(mgbdev);
+err_alloc_irq:
+ pci_disable_msix(pdev);
+err_enable_pci:
+ pci_disable_device(pdev);
+err_mgbdev:
+ kfree(mgbdev);
+
+ return rv;
+}
+
+static void mgb4_remove(struct pci_dev *pdev)
+{
+ struct mgb4_dev *mgbdev = pci_get_drvdata(pdev);
+ int i;
+
+#ifdef CONFIG_DEBUG_FS
+ debugfs_remove_recursive(mgbdev->debugfs);
+#endif
+#if IS_REACHABLE(CONFIG_HWMON)
+ hwmon_device_unregister(mgbdev->hwmon_dev);
+#endif
+
+ if (mgbdev->indio_dev)
+ mgb4_trigger_free(mgbdev->indio_dev);
+
+ for (i = 0; i < MGB4_VOUT_DEVICES; i++)
+ if (mgbdev->vout[i])
+ mgb4_vout_free(mgbdev->vout[i]);
+ for (i = 0; i < MGB4_VIN_DEVICES; i++)
+ if (mgbdev->vin[i])
+ mgb4_vin_free(mgbdev->vin[i]);
+
+ device_remove_groups(&mgbdev->pdev->dev, mgb4_pci_groups);
+ free_spi(mgbdev);
+ free_i2c(mgbdev);
+ mgb4_regs_free(&mgbdev->video);
+ mgb4_regs_free(&mgbdev->cmt);
+
+ mgb4_dma_channel_free(mgbdev);
+ free_xdma(mgbdev);
+
+ pci_disable_msix(mgbdev->pdev);
+ pci_disable_device(mgbdev->pdev);
+
+ kfree(mgbdev);
+}
+
+static const struct pci_device_id mgb4_pci_ids[] = {
+ { PCI_DEVICE(0x1ed8, 0x0101), },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, mgb4_pci_ids);
+
+static struct pci_driver mgb4_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = mgb4_pci_ids,
+ .probe = mgb4_probe,
+ .remove = mgb4_remove,
+};
+
+module_pci_driver(mgb4_pci_driver);
+
+MODULE_AUTHOR("Digiteq Automotive s.r.o.");
+MODULE_DESCRIPTION("Digiteq Automotive MGB4 Driver");
+MODULE_LICENSE("GPL");
+MODULE_SOFTDEP("pre: platform:xiic-i2c platform:xilinx_spi spi-nor");
diff --git a/drivers/media/pci/mgb4/mgb4_core.h b/drivers/media/pci/mgb4/mgb4_core.h
new file mode 100644
index 000000000000..2a946e46aec1
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_core.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021-2023 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ */
+
+#ifndef __MGB4_CORE_H__
+#define __MGB4_CORE_H__
+
+#include <linux/spi/flash.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mutex.h>
+#include <linux/dmaengine.h>
+#include "mgb4_regs.h"
+
+#define MGB4_VIN_DEVICES 2
+#define MGB4_VOUT_DEVICES 2
+
+#define MGB4_MGB4_BAR_ID 0
+#define MGB4_XDMA_BAR_ID 1
+
+#define MGB4_IS_GMSL(mgbdev) \
+ ((mgbdev)->module_version >> 4 == 2)
+#define MGB4_IS_FPDL3(mgbdev) \
+ ((mgbdev)->module_version >> 4 == 1)
+
+struct mgb4_dma_channel {
+ struct dma_chan *chan;
+ struct completion req_compl;
+};
+
+struct mgb4_dev {
+ struct pci_dev *pdev;
+ struct platform_device *xdev;
+ struct mgb4_vin_dev *vin[MGB4_VIN_DEVICES];
+ struct mgb4_vout_dev *vout[MGB4_VOUT_DEVICES];
+
+ struct mgb4_dma_channel c2h_chan[MGB4_VIN_DEVICES];
+ struct mgb4_dma_channel h2c_chan[MGB4_VOUT_DEVICES];
+ struct dma_slave_map slave_map[MGB4_VIN_DEVICES + MGB4_VOUT_DEVICES];
+
+ struct mgb4_regs video;
+ struct mgb4_regs cmt;
+
+ struct clk_hw *i2c_clk;
+ struct clk_lookup *i2c_cl;
+ struct platform_device *i2c_pdev;
+ struct i2c_adapter *i2c_adap;
+ struct mutex i2c_lock; /* I2C bus access lock */
+
+ struct platform_device *spi_pdev;
+ struct flash_platform_data flash_data;
+ struct mtd_partition partitions[2];
+ char flash_name[16];
+ char fw_part_name[16];
+ char data_part_name[16];
+ char channel_names[MGB4_VIN_DEVICES + MGB4_VOUT_DEVICES][16];
+
+ struct iio_dev *indio_dev;
+#if IS_REACHABLE(CONFIG_HWMON)
+ struct device *hwmon_dev;
+#endif
+
+ unsigned long io_reconfig;
+
+ u8 module_version;
+ u32 serial_number;
+
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *debugfs;
+#endif
+};
+
+#endif
diff --git a/drivers/media/pci/mgb4/mgb4_dma.c b/drivers/media/pci/mgb4/mgb4_dma.c
new file mode 100644
index 000000000000..cae888e6504b
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_dma.c
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021-2022 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ *
+ * This module handles the DMA transfers. A standard dmaengine API as provided
+ * by the XDMA module is used.
+ */
+
+#include <linux/pci.h>
+#include <linux/dma-direction.h>
+#include "mgb4_core.h"
+#include "mgb4_dma.h"
+
+static void chan_irq(void *param)
+{
+ struct mgb4_dma_channel *chan = param;
+
+ complete(&chan->req_compl);
+}
+
+int mgb4_dma_transfer(struct mgb4_dev *mgbdev, u32 channel, bool write,
+ u64 paddr, struct sg_table *sgt)
+{
+ struct dma_slave_config cfg;
+ struct mgb4_dma_channel *chan;
+ struct dma_async_tx_descriptor *tx;
+ struct pci_dev *pdev = mgbdev->pdev;
+ int ret;
+
+ memset(&cfg, 0, sizeof(cfg));
+
+ if (write) {
+ cfg.direction = DMA_MEM_TO_DEV;
+ cfg.dst_addr = paddr;
+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ chan = &mgbdev->h2c_chan[channel];
+ } else {
+ cfg.direction = DMA_DEV_TO_MEM;
+ cfg.src_addr = paddr;
+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ chan = &mgbdev->c2h_chan[channel];
+ }
+
+ ret = dmaengine_slave_config(chan->chan, &cfg);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to config dma: %d\n", ret);
+ return ret;
+ }
+
+ tx = dmaengine_prep_slave_sg(chan->chan, sgt->sgl, sgt->nents,
+ cfg.direction, 0);
+ if (!tx) {
+ dev_err(&pdev->dev, "failed to prep slave sg\n");
+ return -EIO;
+ }
+
+ tx->callback = chan_irq;
+ tx->callback_param = chan;
+
+ ret = dma_submit_error(dmaengine_submit(tx));
+ if (ret) {
+ dev_err(&pdev->dev, "failed to submit sg\n");
+ return -EIO;
+ }
+
+ dma_async_issue_pending(chan->chan);
+
+ if (!wait_for_completion_timeout(&chan->req_compl,
+ msecs_to_jiffies(10000))) {
+ dev_err(&pdev->dev, "dma timeout\n");
+ dmaengine_terminate_sync(chan->chan);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+int mgb4_dma_channel_init(struct mgb4_dev *mgbdev)
+{
+ int i, ret;
+ char name[16];
+ struct pci_dev *pdev = mgbdev->pdev;
+
+ for (i = 0; i < MGB4_VIN_DEVICES; i++) {
+ sprintf(name, "c2h%d", i);
+ mgbdev->c2h_chan[i].chan = dma_request_chan(&pdev->dev, name);
+ if (IS_ERR(mgbdev->c2h_chan[i].chan)) {
+ dev_err(&pdev->dev, "failed to initialize %s", name);
+ ret = PTR_ERR(mgbdev->c2h_chan[i].chan);
+ mgbdev->c2h_chan[i].chan = NULL;
+ return ret;
+ }
+ init_completion(&mgbdev->c2h_chan[i].req_compl);
+ }
+ for (i = 0; i < MGB4_VOUT_DEVICES; i++) {
+ sprintf(name, "h2c%d", i);
+ mgbdev->h2c_chan[i].chan = dma_request_chan(&pdev->dev, name);
+ if (IS_ERR(mgbdev->h2c_chan[i].chan)) {
+ dev_err(&pdev->dev, "failed to initialize %s", name);
+ ret = PTR_ERR(mgbdev->h2c_chan[i].chan);
+ mgbdev->h2c_chan[i].chan = NULL;
+ return ret;
+ }
+ init_completion(&mgbdev->h2c_chan[i].req_compl);
+ }
+
+ return 0;
+}
+
+void mgb4_dma_channel_free(struct mgb4_dev *mgbdev)
+{
+ int i;
+
+ for (i = 0; i < MGB4_VIN_DEVICES; i++) {
+ if (mgbdev->c2h_chan[i].chan)
+ dma_release_channel(mgbdev->c2h_chan[i].chan);
+ }
+ for (i = 0; i < MGB4_VOUT_DEVICES; i++) {
+ if (mgbdev->h2c_chan[i].chan)
+ dma_release_channel(mgbdev->h2c_chan[i].chan);
+ }
+}
diff --git a/drivers/media/pci/mgb4/mgb4_dma.h b/drivers/media/pci/mgb4/mgb4_dma.h
new file mode 100644
index 000000000000..4ebc2b1ce9b7
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_dma.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021-2023 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ */
+
+#ifndef __MGB4_DMA_H__
+#define __MGB4_DMA_H__
+
+#include "mgb4_core.h"
+
+int mgb4_dma_channel_init(struct mgb4_dev *mgbdev);
+void mgb4_dma_channel_free(struct mgb4_dev *mgbdev);
+
+int mgb4_dma_transfer(struct mgb4_dev *mgbdev, u32 channel, bool write,
+ u64 paddr, struct sg_table *sgt);
+
+#endif
diff --git a/drivers/media/pci/mgb4/mgb4_i2c.c b/drivers/media/pci/mgb4/mgb4_i2c.c
new file mode 100644
index 000000000000..2697b67e290e
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_i2c.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021-2023 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ *
+ * The i2c module unifies the I2C access to the serializes/deserializes. The I2C
+ * chips on the GMSL module use 16b addressing, the FPDL3 chips use standard
+ * 8b addressing.
+ */
+
+#include "mgb4_i2c.h"
+
+static int read_r16(struct i2c_client *client, u16 reg, u8 *val, int len)
+{
+ int ret;
+ u8 buf[2];
+ struct i2c_msg msg[2] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 2,
+ .buf = buf,
+ }, {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = len,
+ .buf = val,
+ }
+ };
+
+ buf[0] = (reg >> 8) & 0xff;
+ buf[1] = (reg >> 0) & 0xff;
+
+ ret = i2c_transfer(client->adapter, msg, 2);
+ if (ret < 0)
+ return ret;
+ else if (ret != 2)
+ return -EREMOTEIO;
+ else
+ return 0;
+}
+
+static int write_r16(struct i2c_client *client, u16 reg, const u8 *val, int len)
+{
+ int ret;
+ u8 buf[4];
+ struct i2c_msg msg[1] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 2 + len,
+ .buf = buf,
+ }
+ };
+
+ if (2 + len > sizeof(buf))
+ return -EINVAL;
+
+ buf[0] = (reg >> 8) & 0xff;
+ buf[1] = (reg >> 0) & 0xff;
+ memcpy(&buf[2], val, len);
+
+ ret = i2c_transfer(client->adapter, msg, 1);
+ if (ret < 0)
+ return ret;
+ else if (ret != 1)
+ return -EREMOTEIO;
+ else
+ return 0;
+}
+
+int mgb4_i2c_init(struct mgb4_i2c_client *client, struct i2c_adapter *adap,
+ struct i2c_board_info const *info, int addr_size)
+{
+ client->client = i2c_new_client_device(adap, info);
+ if (IS_ERR(client->client))
+ return PTR_ERR(client->client);
+
+ client->addr_size = addr_size;
+
+ return 0;
+}
+
+void mgb4_i2c_free(struct mgb4_i2c_client *client)
+{
+ i2c_unregister_device(client->client);
+}
+
+s32 mgb4_i2c_read_byte(struct mgb4_i2c_client *client, u16 reg)
+{
+ int ret;
+ u8 b;
+
+ if (client->addr_size == 8)
+ return i2c_smbus_read_byte_data(client->client, reg);
+
+ ret = read_r16(client->client, reg, &b, 1);
+ if (ret < 0)
+ return ret;
+
+ return (s32)b;
+}
+
+s32 mgb4_i2c_write_byte(struct mgb4_i2c_client *client, u16 reg, u8 val)
+{
+ if (client->addr_size == 8)
+ return i2c_smbus_write_byte_data(client->client, reg, val);
+ else
+ return write_r16(client->client, reg, &val, 1);
+}
+
+s32 mgb4_i2c_mask_byte(struct mgb4_i2c_client *client, u16 reg, u8 mask, u8 val)
+{
+ s32 ret;
+
+ if (mask != 0xFF) {
+ ret = mgb4_i2c_read_byte(client, reg);
+ if (ret < 0)
+ return ret;
+ val |= (u8)ret & ~mask;
+ }
+
+ return mgb4_i2c_write_byte(client, reg, val);
+}
+
+int mgb4_i2c_configure(struct mgb4_i2c_client *client,
+ const struct mgb4_i2c_kv *values, size_t count)
+{
+ size_t i;
+ s32 res;
+
+ for (i = 0; i < count; i++) {
+ res = mgb4_i2c_mask_byte(client, values[i].reg, values[i].mask,
+ values[i].val);
+ if (res < 0)
+ return res;
+ }
+
+ return 0;
+}
diff --git a/drivers/media/pci/mgb4/mgb4_i2c.h b/drivers/media/pci/mgb4/mgb4_i2c.h
new file mode 100644
index 000000000000..fac6a1634474
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_i2c.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021-2023 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ */
+
+#ifndef __MGB4_I2C_H__
+#define __MGB4_I2C_H__
+
+#include <linux/i2c.h>
+
+struct mgb4_i2c_client {
+ struct i2c_client *client;
+ int addr_size;
+};
+
+struct mgb4_i2c_kv {
+ u16 reg;
+ u8 mask;
+ u8 val;
+};
+
+int mgb4_i2c_init(struct mgb4_i2c_client *client, struct i2c_adapter *adap,
+ struct i2c_board_info const *info, int addr_size);
+void mgb4_i2c_free(struct mgb4_i2c_client *client);
+
+s32 mgb4_i2c_read_byte(struct mgb4_i2c_client *client, u16 reg);
+s32 mgb4_i2c_write_byte(struct mgb4_i2c_client *client, u16 reg, u8 val);
+s32 mgb4_i2c_mask_byte(struct mgb4_i2c_client *client, u16 reg, u8 mask,
+ u8 val);
+
+int mgb4_i2c_configure(struct mgb4_i2c_client *client,
+ const struct mgb4_i2c_kv *values, size_t count);
+
+#endif
diff --git a/drivers/media/pci/mgb4/mgb4_io.h b/drivers/media/pci/mgb4/mgb4_io.h
new file mode 100644
index 000000000000..8698db1be4a9
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_io.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021-2022 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ */
+
+#ifndef __MGB4_IO_H__
+#define __MGB4_IO_H__
+
+#include <media/v4l2-dev.h>
+
+#define MGB4_DEFAULT_WIDTH 1280
+#define MGB4_DEFAULT_HEIGHT 640
+#define MGB4_DEFAULT_PERIOD (125000000 / 60)
+
+/* Register access error indication */
+#define MGB4_ERR_NO_REG 0xFFFFFFFE
+/* Frame buffer addresses greater than 0xFFFFFFFA indicate HW errors */
+#define MGB4_ERR_QUEUE_TIMEOUT 0xFFFFFFFD
+#define MGB4_ERR_QUEUE_EMPTY 0xFFFFFFFC
+#define MGB4_ERR_QUEUE_FULL 0xFFFFFFFB
+
+struct mgb4_frame_buffer {
+ struct vb2_v4l2_buffer vb;
+ struct list_head list;
+};
+
+static inline struct mgb4_frame_buffer *to_frame_buffer(struct vb2_v4l2_buffer *vbuf)
+{
+ return container_of(vbuf, struct mgb4_frame_buffer, vb);
+}
+
+#endif
diff --git a/drivers/media/pci/mgb4/mgb4_regs.c b/drivers/media/pci/mgb4/mgb4_regs.c
new file mode 100644
index 000000000000..53d4e4503a74
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_regs.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021-2022 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ */
+
+#include <linux/ioport.h>
+#include "mgb4_regs.h"
+
+int mgb4_regs_map(struct resource *res, struct mgb4_regs *regs)
+{
+ regs->mapbase = res->start;
+ regs->mapsize = res->end - res->start;
+
+ if (!request_mem_region(regs->mapbase, regs->mapsize, res->name))
+ return -EINVAL;
+ regs->membase = ioremap(regs->mapbase, regs->mapsize);
+ if (!regs->membase) {
+ release_mem_region(regs->mapbase, regs->mapsize);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void mgb4_regs_free(struct mgb4_regs *regs)
+{
+ iounmap(regs->membase);
+ release_mem_region(regs->mapbase, regs->mapsize);
+}
diff --git a/drivers/media/pci/mgb4/mgb4_regs.h b/drivers/media/pci/mgb4/mgb4_regs.h
new file mode 100644
index 000000000000..c45180890730
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_regs.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021-2022 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ */
+
+#ifndef __MGB4_REGS_H__
+#define __MGB4_REGS_H__
+
+#include <linux/io.h>
+
+struct mgb4_regs {
+ resource_size_t mapbase;
+ resource_size_t mapsize;
+ void __iomem *membase;
+};
+
+#define mgb4_write_reg(regs, offset, val) \
+ iowrite32(val, (regs)->membase + (offset))
+#define mgb4_read_reg(regs, offset) \
+ ioread32((regs)->membase + (offset))
+
+static inline void mgb4_mask_reg(struct mgb4_regs *regs, u32 reg, u32 mask,
+ u32 val)
+{
+ u32 ret = mgb4_read_reg(regs, reg);
+
+ val |= ret & ~mask;
+ mgb4_write_reg(regs, reg, val);
+}
+
+int mgb4_regs_map(struct resource *res, struct mgb4_regs *regs);
+void mgb4_regs_free(struct mgb4_regs *regs);
+
+#endif
diff --git a/drivers/media/pci/mgb4/mgb4_sysfs.h b/drivers/media/pci/mgb4/mgb4_sysfs.h
new file mode 100644
index 000000000000..017d82c0624e
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_sysfs.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021-2022 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ */
+
+#ifndef __MGB4_SYSFS_H__
+#define __MGB4_SYSFS_H__
+
+#include <linux/sysfs.h>
+
+extern struct attribute *mgb4_pci_attrs[];
+extern struct attribute *mgb4_fpdl3_in_attrs[];
+extern struct attribute *mgb4_gmsl_in_attrs[];
+extern struct attribute *mgb4_fpdl3_out_attrs[];
+extern struct attribute *mgb4_gmsl_out_attrs[];
+
+#endif
diff --git a/drivers/media/pci/mgb4/mgb4_sysfs_in.c b/drivers/media/pci/mgb4/mgb4_sysfs_in.c
new file mode 100644
index 000000000000..0ba66a2cf145
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_sysfs_in.c
@@ -0,0 +1,772 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021-2023 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ *
+ * This module handles all the sysfs info/configuration that is related to the
+ * v4l2 input devices.
+ */
+
+#include <linux/device.h>
+#include "mgb4_core.h"
+#include "mgb4_i2c.h"
+#include "mgb4_vin.h"
+#include "mgb4_cmt.h"
+#include "mgb4_sysfs.h"
+
+/* Common for both FPDL3 and GMSL */
+
+static ssize_t input_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+
+ return sprintf(buf, "%d\n", vindev->config->id);
+}
+
+static ssize_t oldi_lane_width_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ struct mgb4_dev *mgbdev = vindev->mgbdev;
+ u16 i2c_reg;
+ u8 i2c_mask, i2c_single_val, i2c_dual_val;
+ u32 config;
+ int ret;
+
+ i2c_reg = MGB4_IS_GMSL(mgbdev) ? 0x1CE : 0x49;
+ i2c_mask = MGB4_IS_GMSL(mgbdev) ? 0x0E : 0x03;
+ i2c_single_val = MGB4_IS_GMSL(mgbdev) ? 0x00 : 0x02;
+ i2c_dual_val = MGB4_IS_GMSL(mgbdev) ? 0x0E : 0x00;
+
+ mutex_lock(&mgbdev->i2c_lock);
+ ret = mgb4_i2c_read_byte(&vindev->deser, i2c_reg);
+ mutex_unlock(&mgbdev->i2c_lock);
+ if (ret < 0)
+ return -EIO;
+
+ config = mgb4_read_reg(&mgbdev->video, vindev->config->regs.config);
+
+ if (((config & (1U << 9)) && ((ret & i2c_mask) != i2c_dual_val)) ||
+ (!(config & (1U << 9)) && ((ret & i2c_mask) != i2c_single_val))) {
+ dev_err(dev, "I2C/FPGA register value mismatch\n");
+ return -EINVAL;
+ }
+
+ return sprintf(buf, "%s\n", config & (1U << 9) ? "1" : "0");
+}
+
+/*
+ * OLDI lane width change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t oldi_lane_width_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ struct mgb4_dev *mgbdev = vindev->mgbdev;
+ u32 fpga_data;
+ u16 i2c_reg;
+ u8 i2c_mask, i2c_data;
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ switch (val) {
+ case 0: /* single */
+ fpga_data = 0;
+ i2c_data = MGB4_IS_GMSL(mgbdev) ? 0x00 : 0x02;
+ break;
+ case 1: /* dual */
+ fpga_data = 1U << 9;
+ i2c_data = MGB4_IS_GMSL(mgbdev) ? 0x0E : 0x00;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ i2c_reg = MGB4_IS_GMSL(mgbdev) ? 0x1CE : 0x49;
+ i2c_mask = MGB4_IS_GMSL(mgbdev) ? 0x0E : 0x03;
+
+ mutex_lock(&mgbdev->i2c_lock);
+ ret = mgb4_i2c_mask_byte(&vindev->deser, i2c_reg, i2c_mask, i2c_data);
+ mutex_unlock(&mgbdev->i2c_lock);
+ if (ret < 0)
+ return -EIO;
+ mgb4_mask_reg(&mgbdev->video, vindev->config->regs.config, 1U << 9,
+ fpga_data);
+ if (MGB4_IS_GMSL(mgbdev)) {
+ /* reset input link */
+ mutex_lock(&mgbdev->i2c_lock);
+ ret = mgb4_i2c_mask_byte(&vindev->deser, 0x10, 1U << 5, 1U << 5);
+ mutex_unlock(&mgbdev->i2c_lock);
+ if (ret < 0)
+ return -EIO;
+ }
+
+ return count;
+}
+
+static ssize_t color_mapping_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 config = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.config);
+
+ return sprintf(buf, "%s\n", config & (1U << 8) ? "0" : "1");
+}
+
+/*
+ * Color mapping change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t color_mapping_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 fpga_data;
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ switch (val) {
+ case 0: /* OLDI/JEIDA */
+ fpga_data = (1U << 8);
+ break;
+ case 1: /* SPWG/VESA */
+ fpga_data = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mgb4_mask_reg(&vindev->mgbdev->video, vindev->config->regs.config,
+ 1U << 8, fpga_data);
+
+ return count;
+}
+
+static ssize_t link_status_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 status = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.status);
+
+ return sprintf(buf, "%s\n", status & (1U << 2) ? "1" : "0");
+}
+
+static ssize_t stream_status_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 status = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.status);
+
+ return sprintf(buf, "%s\n", ((status & (1 << 14)) &&
+ (status & (1 << 2)) && (status & (3 << 9))) ? "1" : "0");
+}
+
+static ssize_t video_width_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 config = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.resolution);
+
+ return sprintf(buf, "%u\n", config >> 16);
+}
+
+static ssize_t video_height_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 config = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.resolution);
+
+ return sprintf(buf, "%u\n", config & 0xFFFF);
+}
+
+static ssize_t hsync_status_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 status = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.status);
+ u32 res;
+
+ if (!(status & (1U << 11)))
+ res = 0x02; // not available
+ else if (status & (1U << 12))
+ res = 0x01; // active high
+ else
+ res = 0x00; // active low
+
+ return sprintf(buf, "%u\n", res);
+}
+
+static ssize_t vsync_status_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 status = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.status);
+ u32 res;
+
+ if (!(status & (1U << 11)))
+ res = 0x02; // not available
+ else if (status & (1U << 13))
+ res = 0x01; // active high
+ else
+ res = 0x00; // active low
+
+ return sprintf(buf, "%u\n", res);
+}
+
+static ssize_t hsync_gap_length_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 sync = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.sync);
+
+ return sprintf(buf, "%u\n", sync >> 16);
+}
+
+/*
+ * HSYNC gap length change is expected to be called on live streams. Video
+ * device locking/queue check is not needed.
+ */
+static ssize_t hsync_gap_length_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 0xFFFF)
+ return -EINVAL;
+
+ mgb4_mask_reg(&vindev->mgbdev->video, vindev->config->regs.sync,
+ 0xFFFF0000, val << 16);
+
+ return count;
+}
+
+static ssize_t vsync_gap_length_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 sync = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.sync);
+
+ return sprintf(buf, "%u\n", sync & 0xFFFF);
+}
+
+/*
+ * VSYNC gap length change is expected to be called on live streams. Video
+ * device locking/queue check is not needed.
+ */
+static ssize_t vsync_gap_length_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 0xFFFF)
+ return -EINVAL;
+
+ mgb4_mask_reg(&vindev->mgbdev->video, vindev->config->regs.sync, 0xFFFF,
+ val);
+
+ return count;
+}
+
+static ssize_t pclk_frequency_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 freq = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.pclk);
+
+ return sprintf(buf, "%u\n", freq);
+}
+
+static ssize_t hsync_width_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 sig = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.signal);
+
+ return sprintf(buf, "%u\n", (sig & 0x00FF0000) >> 16);
+}
+
+static ssize_t vsync_width_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 sig = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.signal2);
+
+ return sprintf(buf, "%u\n", (sig & 0x00FF0000) >> 16);
+}
+
+static ssize_t hback_porch_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 sig = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.signal);
+
+ return sprintf(buf, "%u\n", (sig & 0x0000FF00) >> 8);
+}
+
+static ssize_t hfront_porch_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 sig = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.signal);
+
+ return sprintf(buf, "%u\n", (sig & 0x000000FF));
+}
+
+static ssize_t vback_porch_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 sig = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.signal2);
+
+ return sprintf(buf, "%u\n", (sig & 0x0000FF00) >> 8);
+}
+
+static ssize_t vfront_porch_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u32 sig = mgb4_read_reg(&vindev->mgbdev->video,
+ vindev->config->regs.signal2);
+
+ return sprintf(buf, "%u\n", (sig & 0x000000FF));
+}
+
+static ssize_t frequency_range_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+
+ return sprintf(buf, "%d\n", vindev->freq_range);
+}
+
+static ssize_t frequency_range_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 1)
+ return -EINVAL;
+
+ mutex_lock(vindev->vdev.lock);
+ if (vb2_is_busy(vindev->vdev.queue)) {
+ mutex_unlock(vindev->vdev.lock);
+ return -EBUSY;
+ }
+
+ mgb4_cmt_set_vin_freq_range(vindev, val);
+ vindev->freq_range = val;
+
+ mutex_unlock(vindev->vdev.lock);
+
+ return count;
+}
+
+/* FPDL3 only */
+
+static ssize_t fpdl3_input_width_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ s32 ret;
+
+ mutex_lock(&vindev->mgbdev->i2c_lock);
+ ret = mgb4_i2c_read_byte(&vindev->deser, 0x34);
+ mutex_unlock(&vindev->mgbdev->i2c_lock);
+ if (ret < 0)
+ return -EIO;
+
+ switch ((u8)ret & 0x18) {
+ case 0:
+ return sprintf(buf, "0\n");
+ case 0x10:
+ return sprintf(buf, "1\n");
+ case 0x08:
+ return sprintf(buf, "2\n");
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * FPD-Link width change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t fpdl3_input_width_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ u8 i2c_data;
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ switch (val) {
+ case 0: /* auto */
+ i2c_data = 0x00;
+ break;
+ case 1: /* single */
+ i2c_data = 0x10;
+ break;
+ case 2: /* dual */
+ i2c_data = 0x08;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mutex_lock(&vindev->mgbdev->i2c_lock);
+ ret = mgb4_i2c_mask_byte(&vindev->deser, 0x34, 0x18, i2c_data);
+ mutex_unlock(&vindev->mgbdev->i2c_lock);
+ if (ret < 0)
+ return -EIO;
+
+ return count;
+}
+
+/* GMSL only */
+
+static ssize_t gmsl_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ s32 r1, r300, r3;
+
+ mutex_lock(&vindev->mgbdev->i2c_lock);
+ r1 = mgb4_i2c_read_byte(&vindev->deser, 0x01);
+ r300 = mgb4_i2c_read_byte(&vindev->deser, 0x300);
+ r3 = mgb4_i2c_read_byte(&vindev->deser, 0x03);
+ mutex_unlock(&vindev->mgbdev->i2c_lock);
+ if (r1 < 0 || r300 < 0 || r3 < 0)
+ return -EIO;
+
+ if ((r1 & 0x03) == 0x03 && (r300 & 0x0C) == 0x0C && (r3 & 0xC0) == 0xC0)
+ return sprintf(buf, "0\n");
+ else if ((r1 & 0x03) == 0x02 && (r300 & 0x0C) == 0x08 && (r3 & 0xC0) == 0x00)
+ return sprintf(buf, "1\n");
+ else if ((r1 & 0x03) == 0x01 && (r300 & 0x0C) == 0x04 && (r3 & 0xC0) == 0x00)
+ return sprintf(buf, "2\n");
+ else if ((r1 & 0x03) == 0x00 && (r300 & 0x0C) == 0x00 && (r3 & 0xC0) == 0x00)
+ return sprintf(buf, "3\n");
+ else
+ return -EINVAL;
+}
+
+/*
+ * GMSL mode change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t gmsl_mode_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ static const struct mgb4_i2c_kv G12[] = {
+ {0x01, 0x03, 0x03}, {0x300, 0x0C, 0x0C}, {0x03, 0xC0, 0xC0}};
+ static const struct mgb4_i2c_kv G6[] = {
+ {0x01, 0x03, 0x02}, {0x300, 0x0C, 0x08}, {0x03, 0xC0, 0x00}};
+ static const struct mgb4_i2c_kv G3[] = {
+ {0x01, 0x03, 0x01}, {0x300, 0x0C, 0x04}, {0x03, 0xC0, 0x00}};
+ static const struct mgb4_i2c_kv G1[] = {
+ {0x01, 0x03, 0x00}, {0x300, 0x0C, 0x00}, {0x03, 0xC0, 0x00}};
+ static const struct mgb4_i2c_kv reset[] = {
+ {0x10, 1U << 5, 1U << 5}, {0x300, 1U << 6, 1U << 6}};
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ const struct mgb4_i2c_kv *values;
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ switch (val) {
+ case 0: /* 12Gb/s */
+ values = G12;
+ break;
+ case 1: /* 6Gb/s */
+ values = G6;
+ break;
+ case 2: /* 3Gb/s */
+ values = G3;
+ break;
+ case 3: /* 1.5Gb/s */
+ values = G1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mutex_lock(&vindev->mgbdev->i2c_lock);
+ ret = mgb4_i2c_configure(&vindev->deser, values, 3);
+ ret |= mgb4_i2c_configure(&vindev->deser, reset, 2);
+ mutex_unlock(&vindev->mgbdev->i2c_lock);
+ if (ret < 0)
+ return -EIO;
+
+ return count;
+}
+
+static ssize_t gmsl_stream_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ s32 ret;
+
+ mutex_lock(&vindev->mgbdev->i2c_lock);
+ ret = mgb4_i2c_read_byte(&vindev->deser, 0xA0);
+ mutex_unlock(&vindev->mgbdev->i2c_lock);
+ if (ret < 0)
+ return -EIO;
+
+ return sprintf(buf, "%d\n", ret & 0x03);
+}
+
+static ssize_t gmsl_stream_id_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 3)
+ return -EINVAL;
+
+ mutex_lock(vindev->vdev.lock);
+ if (vb2_is_busy(vindev->vdev.queue)) {
+ mutex_unlock(vindev->vdev.lock);
+ return -EBUSY;
+ }
+
+ mutex_lock(&vindev->mgbdev->i2c_lock);
+ ret = mgb4_i2c_mask_byte(&vindev->deser, 0xA0, 0x03, (u8)val);
+ mutex_unlock(&vindev->mgbdev->i2c_lock);
+
+ mutex_unlock(vindev->vdev.lock);
+
+ return (ret < 0) ? -EIO : count;
+}
+
+static ssize_t gmsl_fec_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ s32 r3e0, r308;
+
+ mutex_lock(&vindev->mgbdev->i2c_lock);
+ r3e0 = mgb4_i2c_read_byte(&vindev->deser, 0x3E0);
+ r308 = mgb4_i2c_read_byte(&vindev->deser, 0x308);
+ mutex_unlock(&vindev->mgbdev->i2c_lock);
+ if (r3e0 < 0 || r308 < 0)
+ return -EIO;
+
+ if ((r3e0 & 0x07) == 0x00 && (r308 & 0x01) == 0x00)
+ return sprintf(buf, "0\n");
+ else if ((r3e0 & 0x07) == 0x07 && (r308 & 0x01) == 0x01)
+ return sprintf(buf, "1\n");
+ else
+ return -EINVAL;
+}
+
+/*
+ * GMSL FEC change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t gmsl_fec_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
+ static const struct mgb4_i2c_kv enable[] = {
+ {0x3E0, 0x07, 0x07}, {0x308, 0x01, 0x01}};
+ static const struct mgb4_i2c_kv disable[] = {
+ {0x3E0, 0x07, 0x00}, {0x308, 0x01, 0x00}};
+ static const struct mgb4_i2c_kv reset[] = {
+ {0x10, 1U << 5, 1U << 5}, {0x300, 1U << 6, 1U << 6}};
+ const struct mgb4_i2c_kv *values;
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ switch (val) {
+ case 0: /* disabled */
+ values = disable;
+ break;
+ case 1: /* enabled */
+ values = enable;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mutex_lock(&vindev->mgbdev->i2c_lock);
+ ret = mgb4_i2c_configure(&vindev->deser, values, 2);
+ ret |= mgb4_i2c_configure(&vindev->deser, reset, 2);
+ mutex_unlock(&vindev->mgbdev->i2c_lock);
+ if (ret < 0)
+ return -EIO;
+
+ return count;
+}
+
+static DEVICE_ATTR_RO(input_id);
+static DEVICE_ATTR_RW(oldi_lane_width);
+static DEVICE_ATTR_RW(color_mapping);
+static DEVICE_ATTR_RO(link_status);
+static DEVICE_ATTR_RO(stream_status);
+static DEVICE_ATTR_RO(video_width);
+static DEVICE_ATTR_RO(video_height);
+static DEVICE_ATTR_RO(hsync_status);
+static DEVICE_ATTR_RO(vsync_status);
+static DEVICE_ATTR_RW(hsync_gap_length);
+static DEVICE_ATTR_RW(vsync_gap_length);
+static DEVICE_ATTR_RO(pclk_frequency);
+static DEVICE_ATTR_RO(hsync_width);
+static DEVICE_ATTR_RO(vsync_width);
+static DEVICE_ATTR_RO(hback_porch);
+static DEVICE_ATTR_RO(hfront_porch);
+static DEVICE_ATTR_RO(vback_porch);
+static DEVICE_ATTR_RO(vfront_porch);
+static DEVICE_ATTR_RW(frequency_range);
+
+static DEVICE_ATTR_RW(fpdl3_input_width);
+
+static DEVICE_ATTR_RW(gmsl_mode);
+static DEVICE_ATTR_RW(gmsl_stream_id);
+static DEVICE_ATTR_RW(gmsl_fec);
+
+struct attribute *mgb4_fpdl3_in_attrs[] = {
+ &dev_attr_input_id.attr,
+ &dev_attr_link_status.attr,
+ &dev_attr_stream_status.attr,
+ &dev_attr_video_width.attr,
+ &dev_attr_video_height.attr,
+ &dev_attr_hsync_status.attr,
+ &dev_attr_vsync_status.attr,
+ &dev_attr_oldi_lane_width.attr,
+ &dev_attr_color_mapping.attr,
+ &dev_attr_hsync_gap_length.attr,
+ &dev_attr_vsync_gap_length.attr,
+ &dev_attr_pclk_frequency.attr,
+ &dev_attr_hsync_width.attr,
+ &dev_attr_vsync_width.attr,
+ &dev_attr_hback_porch.attr,
+ &dev_attr_hfront_porch.attr,
+ &dev_attr_vback_porch.attr,
+ &dev_attr_vfront_porch.attr,
+ &dev_attr_frequency_range.attr,
+ &dev_attr_fpdl3_input_width.attr,
+ NULL
+};
+
+struct attribute *mgb4_gmsl_in_attrs[] = {
+ &dev_attr_input_id.attr,
+ &dev_attr_link_status.attr,
+ &dev_attr_stream_status.attr,
+ &dev_attr_video_width.attr,
+ &dev_attr_video_height.attr,
+ &dev_attr_hsync_status.attr,
+ &dev_attr_vsync_status.attr,
+ &dev_attr_oldi_lane_width.attr,
+ &dev_attr_color_mapping.attr,
+ &dev_attr_hsync_gap_length.attr,
+ &dev_attr_vsync_gap_length.attr,
+ &dev_attr_pclk_frequency.attr,
+ &dev_attr_hsync_width.attr,
+ &dev_attr_vsync_width.attr,
+ &dev_attr_hback_porch.attr,
+ &dev_attr_hfront_porch.attr,
+ &dev_attr_vback_porch.attr,
+ &dev_attr_vfront_porch.attr,
+ &dev_attr_frequency_range.attr,
+ &dev_attr_gmsl_mode.attr,
+ &dev_attr_gmsl_stream_id.attr,
+ &dev_attr_gmsl_fec.attr,
+ NULL
+};
diff --git a/drivers/media/pci/mgb4/mgb4_sysfs_out.c b/drivers/media/pci/mgb4/mgb4_sysfs_out.c
new file mode 100644
index 000000000000..23a9aabf3915
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_sysfs_out.c
@@ -0,0 +1,737 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021-2023 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ *
+ * This module handles all the sysfs info/configuration that is related to the
+ * v4l2 output devices.
+ */
+
+#include <linux/device.h>
+#include "mgb4_core.h"
+#include "mgb4_i2c.h"
+#include "mgb4_vout.h"
+#include "mgb4_vin.h"
+#include "mgb4_cmt.h"
+#include "mgb4_sysfs.h"
+
+static int loopin_cnt(struct mgb4_vin_dev *vindev)
+{
+ struct mgb4_vout_dev *voutdev;
+ u32 config;
+ int i, cnt = 0;
+
+ for (i = 0; i < MGB4_VOUT_DEVICES; i++) {
+ voutdev = vindev->mgbdev->vout[i];
+ if (!voutdev)
+ continue;
+
+ config = mgb4_read_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.config);
+ if ((config & 0xc) >> 2 == vindev->config->id)
+ cnt++;
+ }
+
+ return cnt;
+}
+
+static bool is_busy(struct video_device *dev)
+{
+ bool ret;
+
+ mutex_lock(dev->lock);
+ ret = vb2_is_busy(dev->queue);
+ mutex_unlock(dev->lock);
+
+ return ret;
+}
+
+/* Common for both FPDL3 and GMSL */
+
+static ssize_t output_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+
+ return sprintf(buf, "%d\n", voutdev->config->id);
+}
+
+static ssize_t video_source_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ u32 config = mgb4_read_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.config);
+
+ return sprintf(buf, "%u\n", (config & 0xc) >> 2);
+}
+
+/*
+ * Video source change may affect the buffer queue of ANY video input/output on
+ * the card thus if any of the inputs/outputs is in use, we do not allow
+ * the change.
+ *
+ * As we do not want to lock all the video devices at the same time, a two-stage
+ * locking strategy is used. In addition to the video device locking there is
+ * a global (PCI device) variable "io_reconfig" atomically checked/set when
+ * the reconfiguration is running. All the video devices check the variable in
+ * their queue_setup() functions and do not allow to start the queue when
+ * the reconfiguration has started.
+ */
+static ssize_t video_source_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ struct mgb4_dev *mgbdev = voutdev->mgbdev;
+ struct mgb4_vin_dev *loopin_new = NULL, *loopin_old = NULL;
+ unsigned long val;
+ ssize_t ret;
+ u32 config;
+ int i;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 3)
+ return -EINVAL;
+
+ if (test_and_set_bit(0, &mgbdev->io_reconfig))
+ return -EBUSY;
+
+ ret = -EBUSY;
+ for (i = 0; i < MGB4_VIN_DEVICES; i++)
+ if (mgbdev->vin[i] && is_busy(&mgbdev->vin[i]->vdev))
+ goto end;
+ for (i = 0; i < MGB4_VOUT_DEVICES; i++)
+ if (mgbdev->vout[i] && is_busy(&mgbdev->vout[i]->vdev))
+ goto end;
+
+ config = mgb4_read_reg(&mgbdev->video, voutdev->config->regs.config);
+
+ if (((config & 0xc) >> 2) < MGB4_VIN_DEVICES)
+ loopin_old = mgbdev->vin[(config & 0xc) >> 2];
+ if (val < MGB4_VIN_DEVICES)
+ loopin_new = mgbdev->vin[val];
+ if (loopin_old && loopin_cnt(loopin_old) == 1)
+ mgb4_mask_reg(&mgbdev->video, loopin_old->config->regs.config,
+ 0x2, 0x0);
+ if (loopin_new)
+ mgb4_mask_reg(&mgbdev->video, loopin_new->config->regs.config,
+ 0x2, 0x2);
+
+ if (val == voutdev->config->id + MGB4_VIN_DEVICES)
+ mgb4_write_reg(&mgbdev->video, voutdev->config->regs.config,
+ config & ~(1 << 1));
+ else
+ mgb4_write_reg(&mgbdev->video, voutdev->config->regs.config,
+ config | (1U << 1));
+
+ mgb4_mask_reg(&mgbdev->video, voutdev->config->regs.config, 0xc,
+ val << 2);
+
+ ret = count;
+end:
+ clear_bit(0, &mgbdev->io_reconfig);
+
+ return ret;
+}
+
+static ssize_t display_width_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ u32 config = mgb4_read_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.resolution);
+
+ return sprintf(buf, "%u\n", config >> 16);
+}
+
+static ssize_t display_width_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 0xFFFF)
+ return -EINVAL;
+
+ mutex_lock(voutdev->vdev.lock);
+ if (vb2_is_busy(voutdev->vdev.queue)) {
+ mutex_unlock(voutdev->vdev.lock);
+ return -EBUSY;
+ }
+
+ mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.resolution,
+ 0xFFFF0000, val << 16);
+
+ mutex_unlock(voutdev->vdev.lock);
+
+ return count;
+}
+
+static ssize_t display_height_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ u32 config = mgb4_read_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.resolution);
+
+ return sprintf(buf, "%u\n", config & 0xFFFF);
+}
+
+static ssize_t display_height_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 0xFFFF)
+ return -EINVAL;
+
+ mutex_lock(voutdev->vdev.lock);
+ if (vb2_is_busy(voutdev->vdev.queue)) {
+ mutex_unlock(voutdev->vdev.lock);
+ return -EBUSY;
+ }
+
+ mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.resolution,
+ 0xFFFF, val);
+
+ mutex_unlock(voutdev->vdev.lock);
+
+ return count;
+}
+
+static ssize_t frame_rate_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ u32 period = mgb4_read_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.frame_period);
+
+ return sprintf(buf, "%u\n", 125000000 / period);
+}
+
+/*
+ * Frame rate change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t frame_rate_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mgb4_write_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.frame_period, 125000000 / val);
+
+ return count;
+}
+
+static ssize_t hsync_width_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ u32 sig = mgb4_read_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.hsync);
+
+ return sprintf(buf, "%u\n", (sig & 0x00FF0000) >> 16);
+}
+
+/*
+ * HSYNC width change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t hsync_width_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 0xFF)
+ return -EINVAL;
+
+ mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.hsync,
+ 0x00FF0000, val << 16);
+
+ return count;
+}
+
+static ssize_t vsync_width_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ u32 sig = mgb4_read_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.vsync);
+
+ return sprintf(buf, "%u\n", (sig & 0x00FF0000) >> 16);
+}
+
+/*
+ * VSYNC vidth change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t vsync_width_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 0xFF)
+ return -EINVAL;
+
+ mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.vsync,
+ 0x00FF0000, val << 16);
+
+ return count;
+}
+
+static ssize_t hback_porch_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ u32 sig = mgb4_read_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.hsync);
+
+ return sprintf(buf, "%u\n", (sig & 0x0000FF00) >> 8);
+}
+
+/*
+ * hback porch change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t hback_porch_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 0xFF)
+ return -EINVAL;
+
+ mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.hsync,
+ 0x0000FF00, val << 8);
+
+ return count;
+}
+
+static ssize_t vback_porch_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ u32 sig = mgb4_read_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.vsync);
+
+ return sprintf(buf, "%u\n", (sig & 0x0000FF00) >> 8);
+}
+
+/*
+ * vback porch change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t vback_porch_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 0xFF)
+ return -EINVAL;
+
+ mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.vsync,
+ 0x0000FF00, val << 8);
+
+ return count;
+}
+
+static ssize_t hfront_porch_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ u32 sig = mgb4_read_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.hsync);
+
+ return sprintf(buf, "%u\n", (sig & 0x000000FF));
+}
+
+/*
+ * hfront porch change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t hfront_porch_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 0xFF)
+ return -EINVAL;
+
+ mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.hsync,
+ 0x000000FF, val);
+
+ return count;
+}
+
+static ssize_t vfront_porch_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ u32 sig = mgb4_read_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.vsync);
+
+ return sprintf(buf, "%u\n", (sig & 0x000000FF));
+}
+
+/*
+ * vfront porch change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t vfront_porch_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 0xFF)
+ return -EINVAL;
+
+ mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.vsync,
+ 0x000000FF, val);
+
+ return count;
+}
+
+/* FPDL3 only */
+
+static ssize_t hsync_polarity_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ u32 config = mgb4_read_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.hsync);
+
+ return sprintf(buf, "%u\n", (config & (1U << 31)) >> 31);
+}
+
+/*
+ * HSYNC polarity change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t hsync_polarity_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 1)
+ return -EINVAL;
+
+ mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.hsync,
+ (1U << 31), val << 31);
+
+ return count;
+}
+
+static ssize_t vsync_polarity_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ u32 config = mgb4_read_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.vsync);
+
+ return sprintf(buf, "%u\n", (config & (1U << 31)) >> 31);
+}
+
+/*
+ * VSYNC polarity change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t vsync_polarity_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 1)
+ return -EINVAL;
+
+ mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.vsync,
+ (1U << 31), val << 31);
+
+ return count;
+}
+
+static ssize_t de_polarity_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ u32 config = mgb4_read_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.vsync);
+
+ return sprintf(buf, "%u\n", (config & (1U << 30)) >> 30);
+}
+
+/*
+ * DE polarity change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t de_polarity_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+ if (val > 1)
+ return -EINVAL;
+
+ mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.vsync,
+ (1U << 30), val << 30);
+
+ return count;
+}
+
+static ssize_t fpdl3_output_width_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ s32 ret;
+
+ mutex_lock(&voutdev->mgbdev->i2c_lock);
+ ret = mgb4_i2c_read_byte(&voutdev->ser, 0x5B);
+ mutex_unlock(&voutdev->mgbdev->i2c_lock);
+ if (ret < 0)
+ return -EIO;
+
+ switch ((u8)ret & 0x03) {
+ case 0:
+ return sprintf(buf, "0\n");
+ case 1:
+ return sprintf(buf, "1\n");
+ case 3:
+ return sprintf(buf, "2\n");
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * FPD-Link width change is expected to be called on live streams. Video device
+ * locking/queue check is not needed.
+ */
+static ssize_t fpdl3_output_width_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ u8 i2c_data;
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ switch (val) {
+ case 0: /* auto */
+ i2c_data = 0x00;
+ break;
+ case 1: /* single */
+ i2c_data = 0x01;
+ break;
+ case 2: /* dual */
+ i2c_data = 0x03;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mutex_lock(&voutdev->mgbdev->i2c_lock);
+ ret = mgb4_i2c_mask_byte(&voutdev->ser, 0x5B, 0x03, i2c_data);
+ mutex_unlock(&voutdev->mgbdev->i2c_lock);
+ if (ret < 0)
+ return -EIO;
+
+ return count;
+}
+
+static ssize_t pclk_frequency_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+
+ return sprintf(buf, "%u\n", voutdev->freq);
+}
+
+static ssize_t pclk_frequency_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct video_device *vdev = to_video_device(dev);
+ struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
+ unsigned long val;
+ int ret;
+ unsigned int dp;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(voutdev->vdev.lock);
+ if (vb2_is_busy(voutdev->vdev.queue)) {
+ mutex_unlock(voutdev->vdev.lock);
+ return -EBUSY;
+ }
+
+ dp = (val > 50000) ? 1 : 0;
+ voutdev->freq = mgb4_cmt_set_vout_freq(voutdev, val >> dp) << dp;
+
+ mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.config,
+ 0x10, dp << 4);
+ mutex_lock(&voutdev->mgbdev->i2c_lock);
+ ret = mgb4_i2c_mask_byte(&voutdev->ser, 0x4F, 1 << 6, ((~dp) & 1) << 6);
+ mutex_unlock(&voutdev->mgbdev->i2c_lock);
+
+ mutex_unlock(voutdev->vdev.lock);
+
+ return (ret < 0) ? -EIO : count;
+}
+
+static DEVICE_ATTR_RO(output_id);
+static DEVICE_ATTR_RW(video_source);
+static DEVICE_ATTR_RW(display_width);
+static DEVICE_ATTR_RW(display_height);
+static DEVICE_ATTR_RW(frame_rate);
+static DEVICE_ATTR_RW(hsync_polarity);
+static DEVICE_ATTR_RW(vsync_polarity);
+static DEVICE_ATTR_RW(de_polarity);
+static DEVICE_ATTR_RW(pclk_frequency);
+static DEVICE_ATTR_RW(hsync_width);
+static DEVICE_ATTR_RW(vsync_width);
+static DEVICE_ATTR_RW(hback_porch);
+static DEVICE_ATTR_RW(hfront_porch);
+static DEVICE_ATTR_RW(vback_porch);
+static DEVICE_ATTR_RW(vfront_porch);
+
+static DEVICE_ATTR_RW(fpdl3_output_width);
+
+struct attribute *mgb4_fpdl3_out_attrs[] = {
+ &dev_attr_output_id.attr,
+ &dev_attr_video_source.attr,
+ &dev_attr_display_width.attr,
+ &dev_attr_display_height.attr,
+ &dev_attr_frame_rate.attr,
+ &dev_attr_hsync_polarity.attr,
+ &dev_attr_vsync_polarity.attr,
+ &dev_attr_de_polarity.attr,
+ &dev_attr_pclk_frequency.attr,
+ &dev_attr_hsync_width.attr,
+ &dev_attr_vsync_width.attr,
+ &dev_attr_hback_porch.attr,
+ &dev_attr_hfront_porch.attr,
+ &dev_attr_vback_porch.attr,
+ &dev_attr_vfront_porch.attr,
+ &dev_attr_fpdl3_output_width.attr,
+ NULL
+};
+
+struct attribute *mgb4_gmsl_out_attrs[] = {
+ &dev_attr_output_id.attr,
+ &dev_attr_video_source.attr,
+ &dev_attr_display_width.attr,
+ &dev_attr_display_height.attr,
+ &dev_attr_frame_rate.attr,
+ NULL
+};
diff --git a/drivers/media/pci/mgb4/mgb4_sysfs_pci.c b/drivers/media/pci/mgb4/mgb4_sysfs_pci.c
new file mode 100644
index 000000000000..d26935ff956b
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_sysfs_pci.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021-2022 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ *
+ * This module handles all the sysfs info/configuration that is related to the
+ * PCI card device.
+ */
+
+#include <linux/device.h>
+#include "mgb4_core.h"
+#include "mgb4_sysfs.h"
+
+static ssize_t module_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mgb4_dev *mgbdev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", mgbdev->module_version & 0x0F);
+}
+
+static ssize_t module_type_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mgb4_dev *mgbdev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", mgbdev->module_version >> 4);
+}
+
+static ssize_t fw_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mgb4_dev *mgbdev = dev_get_drvdata(dev);
+ u32 config = mgb4_read_reg(&mgbdev->video, 0xC4);
+
+ return sprintf(buf, "%u\n", config & 0xFFFF);
+}
+
+static ssize_t fw_type_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mgb4_dev *mgbdev = dev_get_drvdata(dev);
+ u32 config = mgb4_read_reg(&mgbdev->video, 0xC4);
+
+ return sprintf(buf, "%u\n", config >> 24);
+}
+
+static ssize_t serial_number_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mgb4_dev *mgbdev = dev_get_drvdata(dev);
+ u32 sn = mgbdev->serial_number;
+
+ return sprintf(buf, "%03d-%03d-%03d-%03d\n", sn >> 24, (sn >> 16) & 0xFF,
+ (sn >> 8) & 0xFF, sn & 0xFF);
+}
+
+static DEVICE_ATTR_RO(module_version);
+static DEVICE_ATTR_RO(module_type);
+static DEVICE_ATTR_RO(fw_version);
+static DEVICE_ATTR_RO(fw_type);
+static DEVICE_ATTR_RO(serial_number);
+
+struct attribute *mgb4_pci_attrs[] = {
+ &dev_attr_module_type.attr,
+ &dev_attr_module_version.attr,
+ &dev_attr_fw_type.attr,
+ &dev_attr_fw_version.attr,
+ &dev_attr_serial_number.attr,
+ NULL
+};
diff --git a/drivers/media/pci/mgb4/mgb4_trigger.c b/drivers/media/pci/mgb4/mgb4_trigger.c
new file mode 100644
index 000000000000..923650d53d4c
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_trigger.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021-2023 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ *
+ * This module handles the IIO trigger device. The card has two signal inputs
+ * for event triggers that can be used to record events related to the video
+ * stream. A standard linux IIO device with triggered buffer capability is
+ * created and configured that can be used to fetch the events with the same
+ * clock source as the video frames.
+ */
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/pci.h>
+#include <linux/dma/amd_xdma.h>
+#include "mgb4_core.h"
+#include "mgb4_trigger.h"
+
+struct trigger_data {
+ struct mgb4_dev *mgbdev;
+ struct iio_trigger *trig;
+};
+
+static int trigger_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct trigger_data *st = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (iio_buffer_enabled(indio_dev))
+ return -EBUSY;
+ *val = mgb4_read_reg(&st->mgbdev->video, 0xA0);
+
+ return IIO_VAL_INT;
+ }
+
+ return -EINVAL;
+}
+
+static int trigger_set_state(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+ struct trigger_data *st = iio_priv(indio_dev);
+ int irq = xdma_get_user_irq(st->mgbdev->xdev, 11);
+
+ if (state)
+ xdma_enable_user_irq(st->mgbdev->xdev, irq);
+ else
+ xdma_disable_user_irq(st->mgbdev->xdev, irq);
+
+ return 0;
+}
+
+static const struct iio_trigger_ops trigger_ops = {
+ .set_trigger_state = &trigger_set_state,
+};
+
+static const struct iio_info trigger_info = {
+ .read_raw = trigger_read_raw,
+};
+
+#define TRIGGER_CHANNEL(_si) { \
+ .type = IIO_ACTIVITY, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .scan_index = _si, \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 32, \
+ .storagebits = 32, \
+ .shift = 0, \
+ .endianness = IIO_CPU \
+ }, \
+}
+
+static const struct iio_chan_spec trigger_channels[] = {
+ TRIGGER_CHANNEL(0),
+ IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static irqreturn_t trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct trigger_data *st = iio_priv(indio_dev);
+ struct {
+ u32 data;
+ s64 ts __aligned(8);
+ } scan;
+
+ scan.data = mgb4_read_reg(&st->mgbdev->video, 0xA0);
+ mgb4_write_reg(&st->mgbdev->video, 0xA0, scan.data);
+
+ iio_push_to_buffers_with_timestamp(indio_dev, &scan, pf->timestamp);
+ iio_trigger_notify_done(indio_dev->trig);
+
+ mgb4_write_reg(&st->mgbdev->video, 0xB4, 1U << 11);
+
+ return IRQ_HANDLED;
+}
+
+static int probe_trigger(struct iio_dev *indio_dev, int irq)
+{
+ int ret;
+ struct trigger_data *st = iio_priv(indio_dev);
+
+ st->trig = iio_trigger_alloc(&st->mgbdev->pdev->dev, "%s-dev%d",
+ indio_dev->name, iio_device_id(indio_dev));
+ if (!st->trig)
+ return -ENOMEM;
+
+ ret = request_irq(irq, &iio_trigger_generic_data_rdy_poll, 0,
+ "mgb4-trigger", st->trig);
+ if (ret)
+ goto error_free_trig;
+
+ st->trig->ops = &trigger_ops;
+ iio_trigger_set_drvdata(st->trig, indio_dev);
+ ret = iio_trigger_register(st->trig);
+ if (ret)
+ goto error_free_irq;
+
+ indio_dev->trig = iio_trigger_get(st->trig);
+
+ return 0;
+
+error_free_irq:
+ free_irq(irq, st->trig);
+error_free_trig:
+ iio_trigger_free(st->trig);
+
+ return ret;
+}
+
+static void remove_trigger(struct iio_dev *indio_dev, int irq)
+{
+ struct trigger_data *st = iio_priv(indio_dev);
+
+ iio_trigger_unregister(st->trig);
+ free_irq(irq, st->trig);
+ iio_trigger_free(st->trig);
+}
+
+struct iio_dev *mgb4_trigger_create(struct mgb4_dev *mgbdev)
+{
+ struct iio_dev *indio_dev;
+ struct trigger_data *data;
+ struct pci_dev *pdev = mgbdev->pdev;
+ struct device *dev = &pdev->dev;
+ int rv, irq;
+
+ indio_dev = iio_device_alloc(dev, sizeof(*data));
+ if (!indio_dev)
+ return NULL;
+
+ indio_dev->info = &trigger_info;
+ indio_dev->name = "mgb4";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = trigger_channels;
+ indio_dev->num_channels = ARRAY_SIZE(trigger_channels);
+
+ data = iio_priv(indio_dev);
+ data->mgbdev = mgbdev;
+
+ irq = xdma_get_user_irq(mgbdev->xdev, 11);
+ rv = probe_trigger(indio_dev, irq);
+ if (rv < 0) {
+ dev_err(dev, "iio triggered setup failed\n");
+ goto error_alloc;
+ }
+ rv = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ trigger_handler, NULL);
+ if (rv < 0) {
+ dev_err(dev, "iio triggered buffer setup failed\n");
+ goto error_trigger;
+ }
+ rv = iio_device_register(indio_dev);
+ if (rv < 0) {
+ dev_err(dev, "iio device register failed\n");
+ goto error_buffer;
+ }
+
+ return indio_dev;
+
+error_buffer:
+ iio_triggered_buffer_cleanup(indio_dev);
+error_trigger:
+ remove_trigger(indio_dev, irq);
+error_alloc:
+ iio_device_free(indio_dev);
+
+ return NULL;
+}
+
+void mgb4_trigger_free(struct iio_dev *indio_dev)
+{
+ struct trigger_data *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ iio_triggered_buffer_cleanup(indio_dev);
+ remove_trigger(indio_dev, xdma_get_user_irq(st->mgbdev->xdev, 11));
+ iio_device_free(indio_dev);
+}
diff --git a/drivers/media/pci/mgb4/mgb4_trigger.h b/drivers/media/pci/mgb4/mgb4_trigger.h
new file mode 100644
index 000000000000..6c25bc4576f6
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_trigger.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021-2022 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ */
+
+struct iio_dev *mgb4_trigger_create(struct mgb4_dev *mgbdev);
+void mgb4_trigger_free(struct iio_dev *indio_dev);
diff --git a/drivers/media/pci/mgb4/mgb4_vin.c b/drivers/media/pci/mgb4/mgb4_vin.c
new file mode 100644
index 000000000000..d72b07b87cd1
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_vin.c
@@ -0,0 +1,939 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021-2023 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ *
+ * This is the v4l2 input device module. It initializes the signal deserializers
+ * and creates the v4l2 video devices. The input signal can change at any time
+ * which is handled by the "timings" callbacks and an IRQ based watcher, that
+ * emits the V4L2_EVENT_SOURCE_CHANGE event in case of a signal source change.
+ *
+ * When the device is in loopback mode (a direct, in HW, in->out frame passing
+ * mode) the card's frame queue must be running regardless of whether a v4l2
+ * stream is running and the output parameters like frame buffers padding must
+ * be in sync with the input parameters.
+ */
+
+#include <linux/pci.h>
+#include <linux/workqueue.h>
+#include <linux/align.h>
+#include <linux/dma/amd_xdma.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-v4l2.h>
+#include <media/videobuf2-dma-sg.h>
+#include <media/v4l2-dv-timings.h>
+#include <media/v4l2-event.h>
+#include "mgb4_core.h"
+#include "mgb4_dma.h"
+#include "mgb4_sysfs.h"
+#include "mgb4_io.h"
+#include "mgb4_vout.h"
+#include "mgb4_vin.h"
+
+ATTRIBUTE_GROUPS(mgb4_fpdl3_in);
+ATTRIBUTE_GROUPS(mgb4_gmsl_in);
+
+static const struct mgb4_vin_config vin_cfg[] = {
+ {0, 0, 0, 6, {0x10, 0x00, 0x04, 0x08, 0x1C, 0x14, 0x18, 0x20, 0x24, 0x28}},
+ {1, 1, 1, 7, {0x40, 0x30, 0x34, 0x38, 0x4C, 0x44, 0x48, 0x50, 0x54, 0x58}}
+};
+
+static const struct i2c_board_info fpdl3_deser_info[] = {
+ {I2C_BOARD_INFO("deserializer1", 0x38)},
+ {I2C_BOARD_INFO("deserializer2", 0x36)},
+};
+
+static const struct i2c_board_info gmsl_deser_info[] = {
+ {I2C_BOARD_INFO("deserializer1", 0x4C)},
+ {I2C_BOARD_INFO("deserializer2", 0x2A)},
+};
+
+static const struct mgb4_i2c_kv fpdl3_i2c[] = {
+ {0x06, 0xFF, 0x04}, {0x07, 0xFF, 0x01}, {0x45, 0xFF, 0xE8},
+ {0x49, 0xFF, 0x00}, {0x34, 0xFF, 0x00}, {0x23, 0xFF, 0x00}
+};
+
+static const struct mgb4_i2c_kv gmsl_i2c[] = {
+ {0x01, 0x03, 0x03}, {0x300, 0x0C, 0x0C}, {0x03, 0xC0, 0xC0},
+ {0x1CE, 0x0E, 0x0E}, {0x11, 0x05, 0x00}, {0x05, 0xC0, 0x40},
+ {0x307, 0x0F, 0x00}, {0xA0, 0x03, 0x00}, {0x3E0, 0x07, 0x07},
+ {0x308, 0x01, 0x01}, {0x10, 0x20, 0x20}, {0x300, 0x40, 0x40}
+};
+
+static const struct v4l2_dv_timings_cap video_timings_cap = {
+ .type = V4L2_DV_BT_656_1120,
+ .bt = {
+ .min_width = 320,
+ .max_width = 4096,
+ .min_height = 240,
+ .max_height = 2160,
+ .min_pixelclock = 1843200, /* 320 x 240 x 24Hz */
+ .max_pixelclock = 530841600, /* 4096 x 2160 x 60Hz */
+ .standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
+ V4L2_DV_BT_STD_CVT | V4L2_DV_BT_STD_GTF,
+ .capabilities = V4L2_DV_BT_CAP_PROGRESSIVE |
+ V4L2_DV_BT_CAP_CUSTOM,
+ },
+};
+
+/*
+ * Returns the video output connected with the given video input if the input
+ * is in loopback mode.
+ */
+static struct mgb4_vout_dev *loopback_dev(struct mgb4_vin_dev *vindev, int i)
+{
+ struct mgb4_vout_dev *voutdev;
+ u32 config;
+
+ voutdev = vindev->mgbdev->vout[i];
+ if (!voutdev)
+ return NULL;
+
+ config = mgb4_read_reg(&voutdev->mgbdev->video,
+ voutdev->config->regs.config);
+ if ((config & 0xc) >> 2 == vindev->config->id)
+ return voutdev;
+
+ return NULL;
+}
+
+/*
+ * Check, whether the loopback mode - a HW INPUT->OUTPUT transmission - is
+ * enabled on the given input.
+ */
+static int loopback_active(struct mgb4_vin_dev *vindev)
+{
+ int i;
+
+ for (i = 0; i < MGB4_VOUT_DEVICES; i++)
+ if (loopback_dev(vindev, i))
+ return 1;
+
+ return 0;
+}
+
+/*
+ * Set the output frame buffer padding of all outputs connected with the given
+ * input when the video input is set to loopback mode. The paddings must be
+ * the same for the loopback to work properly.
+ */
+static void set_loopback_padding(struct mgb4_vin_dev *vindev, u32 padding)
+{
+ struct mgb4_regs *video = &vindev->mgbdev->video;
+ struct mgb4_vout_dev *voutdev;
+ int i;
+
+ for (i = 0; i < MGB4_VOUT_DEVICES; i++) {
+ voutdev = loopback_dev(vindev, i);
+ if (voutdev)
+ mgb4_write_reg(video, voutdev->config->regs.padding,
+ padding);
+ }
+}
+
+static int get_timings(struct mgb4_vin_dev *vindev,
+ struct v4l2_dv_timings *timings)
+{
+ struct mgb4_regs *video = &vindev->mgbdev->video;
+ const struct mgb4_vin_regs *regs = &vindev->config->regs;
+
+ u32 status = mgb4_read_reg(video, regs->status);
+ u32 pclk = mgb4_read_reg(video, regs->pclk);
+ u32 signal = mgb4_read_reg(video, regs->signal);
+ u32 signal2 = mgb4_read_reg(video, regs->signal2);
+ u32 resolution = mgb4_read_reg(video, regs->resolution);
+
+ if (!(status & (1U << 2)))
+ return -ENOLCK;
+ if (!(status & (3 << 9)))
+ return -ENOLINK;
+
+ memset(timings, 0, sizeof(*timings));
+ timings->type = V4L2_DV_BT_656_1120;
+ timings->bt.width = resolution >> 16;
+ timings->bt.height = resolution & 0xFFFF;
+ if (status & (1U << 12))
+ timings->bt.polarities |= V4L2_DV_HSYNC_POS_POL;
+ if (status & (1U << 13))
+ timings->bt.polarities |= V4L2_DV_VSYNC_POS_POL;
+ timings->bt.pixelclock = pclk * 1000;
+ timings->bt.hsync = (signal & 0x00FF0000) >> 16;
+ timings->bt.vsync = (signal2 & 0x00FF0000) >> 16;
+ timings->bt.hbackporch = (signal & 0x0000FF00) >> 8;
+ timings->bt.hfrontporch = signal & 0x000000FF;
+ timings->bt.vbackporch = (signal2 & 0x0000FF00) >> 8;
+ timings->bt.vfrontporch = signal2 & 0x000000FF;
+
+ return 0;
+}
+
+static void return_all_buffers(struct mgb4_vin_dev *vindev,
+ enum vb2_buffer_state state)
+{
+ struct mgb4_frame_buffer *buf, *node;
+ unsigned long flags;
+
+ spin_lock_irqsave(&vindev->qlock, flags);
+ list_for_each_entry_safe(buf, node, &vindev->buf_list, list) {
+ vb2_buffer_done(&buf->vb.vb2_buf, state);
+ list_del(&buf->list);
+ }
+ spin_unlock_irqrestore(&vindev->qlock, flags);
+}
+
+static int queue_setup(struct vb2_queue *q, unsigned int *nbuffers,
+ unsigned int *nplanes, unsigned int sizes[],
+ struct device *alloc_devs[])
+{
+ struct mgb4_vin_dev *vindev = vb2_get_drv_priv(q);
+ unsigned int size = (vindev->timings.bt.width + vindev->padding)
+ * vindev->timings.bt.height * 4;
+
+ /*
+ * If I/O reconfiguration is in process, do not allow to start
+ * the queue. See video_source_store() in mgb4_sysfs_out.c for
+ * details.
+ */
+ if (test_bit(0, &vindev->mgbdev->io_reconfig))
+ return -EBUSY;
+
+ if (!size)
+ return -EINVAL;
+ if (*nplanes)
+ return sizes[0] < size ? -EINVAL : 0;
+ *nplanes = 1;
+ sizes[0] = size;
+
+ return 0;
+}
+
+static int buffer_init(struct vb2_buffer *vb)
+{
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct mgb4_frame_buffer *buf = to_frame_buffer(vbuf);
+
+ INIT_LIST_HEAD(&buf->list);
+
+ return 0;
+}
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+ struct mgb4_vin_dev *vindev = vb2_get_drv_priv(vb->vb2_queue);
+ struct device *dev = &vindev->mgbdev->pdev->dev;
+ unsigned int size = (vindev->timings.bt.width + vindev->padding)
+ * vindev->timings.bt.height * 4;
+
+ if (vb2_plane_size(vb, 0) < size) {
+ dev_err(dev, "buffer too small (%lu < %u)\n",
+ vb2_plane_size(vb, 0), size);
+ return -EINVAL;
+ }
+
+ vb2_set_plane_payload(vb, 0, size);
+
+ return 0;
+}
+
+static void buffer_queue(struct vb2_buffer *vb)
+{
+ struct mgb4_vin_dev *vindev = vb2_get_drv_priv(vb->vb2_queue);
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct mgb4_frame_buffer *buf = to_frame_buffer(vbuf);
+ unsigned long flags;
+
+ spin_lock_irqsave(&vindev->qlock, flags);
+ list_add_tail(&buf->list, &vindev->buf_list);
+ spin_unlock_irqrestore(&vindev->qlock, flags);
+}
+
+static void stop_streaming(struct vb2_queue *vq)
+{
+ struct mgb4_vin_dev *vindev = vb2_get_drv_priv(vq);
+ const struct mgb4_vin_config *config = vindev->config;
+ int irq = xdma_get_user_irq(vindev->mgbdev->xdev, config->vin_irq);
+
+ xdma_disable_user_irq(vindev->mgbdev->xdev, irq);
+
+ /*
+ * In loopback mode, the HW frame queue must be left running for
+ * the IN->OUT transmission to work!
+ */
+ if (!loopback_active(vindev))
+ mgb4_mask_reg(&vindev->mgbdev->video, config->regs.config, 0x2,
+ 0x0);
+
+ cancel_work_sync(&vindev->dma_work);
+ return_all_buffers(vindev, VB2_BUF_STATE_ERROR);
+}
+
+static int start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+ struct mgb4_vin_dev *vindev = vb2_get_drv_priv(vq);
+ const struct mgb4_vin_config *config = vindev->config;
+ int irq = xdma_get_user_irq(vindev->mgbdev->xdev, config->vin_irq);
+
+ vindev->sequence = 0;
+
+ /*
+ * In loopback mode, the HW frame queue is already running.
+ */
+ if (!loopback_active(vindev))
+ mgb4_mask_reg(&vindev->mgbdev->video, config->regs.config, 0x2,
+ 0x2);
+
+ xdma_enable_user_irq(vindev->mgbdev->xdev, irq);
+
+ return 0;
+}
+
+static const struct vb2_ops queue_ops = {
+ .queue_setup = queue_setup,
+ .buf_init = buffer_init,
+ .buf_prepare = buffer_prepare,
+ .buf_queue = buffer_queue,
+ .start_streaming = start_streaming,
+ .stop_streaming = stop_streaming,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish
+};
+
+static int fh_open(struct file *file)
+{
+ struct mgb4_vin_dev *vindev = video_drvdata(file);
+ int rv;
+
+ mutex_lock(&vindev->lock);
+
+ rv = v4l2_fh_open(file);
+ if (rv)
+ goto out;
+
+ if (!v4l2_fh_is_singular_file(file))
+ goto out;
+
+ get_timings(vindev, &vindev->timings);
+ set_loopback_padding(vindev, vindev->padding);
+
+out:
+ mutex_unlock(&vindev->lock);
+ return rv;
+}
+
+static int fh_release(struct file *file)
+{
+ struct mgb4_vin_dev *vindev = video_drvdata(file);
+ int rv;
+
+ mutex_lock(&vindev->lock);
+
+ if (v4l2_fh_is_singular_file(file))
+ set_loopback_padding(vindev, 0);
+
+ rv = _vb2_fop_release(file, NULL);
+
+ mutex_unlock(&vindev->lock);
+
+ return rv;
+}
+
+static const struct v4l2_file_operations video_fops = {
+ .owner = THIS_MODULE,
+ .open = fh_open,
+ .release = fh_release,
+ .unlocked_ioctl = video_ioctl2,
+ .read = vb2_fop_read,
+ .mmap = vb2_fop_mmap,
+ .poll = vb2_fop_poll,
+};
+
+static int vidioc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
+ strscpy(cap->card, "MGB4 PCIe Card", sizeof(cap->card));
+
+ return 0;
+}
+
+static int vidioc_enum_fmt(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ if (f->index != 0)
+ return -EINVAL;
+
+ f->pixelformat = V4L2_PIX_FMT_ABGR32;
+
+ return 0;
+}
+
+static int vidioc_enum_frameintervals(struct file *file, void *priv,
+ struct v4l2_frmivalenum *ival)
+{
+ struct mgb4_vin_dev *vindev = video_drvdata(file);
+
+ if (ival->index != 0)
+ return -EINVAL;
+ if (ival->pixel_format != V4L2_PIX_FMT_ABGR32)
+ return -EINVAL;
+ if (ival->width != vindev->timings.bt.width ||
+ ival->height != vindev->timings.bt.height)
+ return -EINVAL;
+
+ ival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS;
+ ival->stepwise.min.denominator = 60;
+ ival->stepwise.min.numerator = 1;
+ ival->stepwise.max.denominator = 1;
+ ival->stepwise.max.numerator = 1;
+ ival->stepwise.step = ival->stepwise.max;
+
+ return 0;
+}
+
+static int vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct mgb4_vin_dev *vindev = video_drvdata(file);
+
+ f->fmt.pix.pixelformat = V4L2_PIX_FMT_ABGR32;
+ f->fmt.pix.width = vindev->timings.bt.width;
+ f->fmt.pix.height = vindev->timings.bt.height;
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_RAW;
+ f->fmt.pix.bytesperline = (f->fmt.pix.width + vindev->padding) * 4;
+ f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * f->fmt.pix.height;
+
+ return 0;
+}
+
+static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct mgb4_vin_dev *vindev = video_drvdata(file);
+
+ f->fmt.pix.pixelformat = V4L2_PIX_FMT_ABGR32;
+ f->fmt.pix.width = vindev->timings.bt.width;
+ f->fmt.pix.height = vindev->timings.bt.height;
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_RAW;
+ f->fmt.pix.bytesperline = max(f->fmt.pix.width * 4,
+ ALIGN_DOWN(f->fmt.pix.bytesperline, 4));
+ f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * f->fmt.pix.height;
+
+ return 0;
+}
+
+static int vidioc_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct mgb4_vin_dev *vindev = video_drvdata(file);
+ struct mgb4_regs *video = &vindev->mgbdev->video;
+
+ if (vb2_is_busy(&vindev->queue))
+ return -EBUSY;
+
+ vidioc_try_fmt(file, priv, f);
+
+ vindev->padding = (f->fmt.pix.bytesperline - (f->fmt.pix.width * 4)) / 4;
+ mgb4_write_reg(video, vindev->config->regs.padding, vindev->padding);
+ set_loopback_padding(vindev, vindev->padding);
+
+ return 0;
+}
+
+static int vidioc_enum_input(struct file *file, void *priv,
+ struct v4l2_input *i)
+{
+ struct mgb4_vin_dev *vindev = video_drvdata(file);
+ struct mgb4_regs *video = &vindev->mgbdev->video;
+ u32 status;
+
+ if (i->index != 0)
+ return -EINVAL;
+
+ strscpy(i->name, "MGB4", sizeof(i->name));
+ i->type = V4L2_INPUT_TYPE_CAMERA;
+ i->capabilities = V4L2_IN_CAP_DV_TIMINGS;
+ i->status = 0;
+
+ status = mgb4_read_reg(video, vindev->config->regs.status);
+ if (!(status & (1U << 2)))
+ i->status |= V4L2_IN_ST_NO_SYNC;
+ if (!(status & (3 << 9)))
+ i->status |= V4L2_IN_ST_NO_SIGNAL;
+
+ return 0;
+}
+
+static int vidioc_enum_framesizes(struct file *file, void *fh,
+ struct v4l2_frmsizeenum *fsize)
+{
+ struct mgb4_vin_dev *vindev = video_drvdata(file);
+
+ if (fsize->index != 0 || fsize->pixel_format != V4L2_PIX_FMT_ABGR32)
+ return -EINVAL;
+
+ fsize->discrete.width = vindev->timings.bt.width;
+ fsize->discrete.height = vindev->timings.bt.height;
+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+
+ return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+ return (i == 0) ? 0 : -EINVAL;
+}
+
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+ *i = 0;
+ return 0;
+}
+
+static int vidioc_parm(struct file *file, void *priv,
+ struct v4l2_streamparm *parm)
+{
+ struct mgb4_vin_dev *vindev = video_drvdata(file);
+ struct mgb4_regs *video = &vindev->mgbdev->video;
+ const struct mgb4_vin_regs *regs = &vindev->config->regs;
+ struct v4l2_fract timeperframe = {
+ .numerator = mgb4_read_reg(video, regs->frame_period),
+ .denominator = 125000000,
+ };
+
+ if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ parm->parm.capture.readbuffers = 2;
+ parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
+ parm->parm.capture.timeperframe = timeperframe;
+
+ return 0;
+}
+
+static int vidioc_s_dv_timings(struct file *file, void *fh,
+ struct v4l2_dv_timings *timings)
+{
+ struct mgb4_vin_dev *vindev = video_drvdata(file);
+
+ if (timings->bt.width < video_timings_cap.bt.min_width ||
+ timings->bt.width > video_timings_cap.bt.max_width ||
+ timings->bt.height < video_timings_cap.bt.min_height ||
+ timings->bt.height > video_timings_cap.bt.max_height)
+ return -EINVAL;
+ if (timings->bt.width == vindev->timings.bt.width &&
+ timings->bt.height == vindev->timings.bt.height)
+ return 0;
+ if (vb2_is_busy(&vindev->queue))
+ return -EBUSY;
+
+ vindev->timings = *timings;
+
+ return 0;
+}
+
+static int vidioc_g_dv_timings(struct file *file, void *fh,
+ struct v4l2_dv_timings *timings)
+{
+ struct mgb4_vin_dev *vindev = video_drvdata(file);
+ *timings = vindev->timings;
+
+ return 0;
+}
+
+static int vidioc_query_dv_timings(struct file *file, void *fh,
+ struct v4l2_dv_timings *timings)
+{
+ struct mgb4_vin_dev *vindev = video_drvdata(file);
+
+ return get_timings(vindev, timings);
+}
+
+static int vidioc_enum_dv_timings(struct file *file, void *fh,
+ struct v4l2_enum_dv_timings *timings)
+{
+ return v4l2_enum_dv_timings_cap(timings, &video_timings_cap, NULL, NULL);
+}
+
+static int vidioc_dv_timings_cap(struct file *file, void *fh,
+ struct v4l2_dv_timings_cap *cap)
+{
+ *cap = video_timings_cap;
+
+ return 0;
+}
+
+static int vidioc_subscribe_event(struct v4l2_fh *fh,
+ const struct v4l2_event_subscription *sub)
+{
+ switch (sub->type) {
+ case V4L2_EVENT_SOURCE_CHANGE:
+ return v4l2_src_change_event_subscribe(fh, sub);
+ }
+
+ return v4l2_ctrl_subscribe_event(fh, sub);
+}
+
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
+ .vidioc_querycap = vidioc_querycap,
+ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt,
+ .vidioc_try_fmt_vid_cap = vidioc_try_fmt,
+ .vidioc_s_fmt_vid_cap = vidioc_s_fmt,
+ .vidioc_g_fmt_vid_cap = vidioc_g_fmt,
+ .vidioc_enum_framesizes = vidioc_enum_framesizes,
+ .vidioc_enum_frameintervals = vidioc_enum_frameintervals,
+ .vidioc_enum_input = vidioc_enum_input,
+ .vidioc_g_input = vidioc_g_input,
+ .vidioc_s_input = vidioc_s_input,
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+ .vidioc_g_parm = vidioc_parm,
+ .vidioc_s_parm = vidioc_parm,
+ .vidioc_dv_timings_cap = vidioc_dv_timings_cap,
+ .vidioc_enum_dv_timings = vidioc_enum_dv_timings,
+ .vidioc_g_dv_timings = vidioc_g_dv_timings,
+ .vidioc_s_dv_timings = vidioc_s_dv_timings,
+ .vidioc_query_dv_timings = vidioc_query_dv_timings,
+ .vidioc_subscribe_event = vidioc_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static void dma_transfer(struct work_struct *work)
+{
+ struct mgb4_vin_dev *vindev = container_of(work, struct mgb4_vin_dev,
+ dma_work);
+ struct mgb4_regs *video = &vindev->mgbdev->video;
+ struct device *dev = &vindev->mgbdev->pdev->dev;
+ struct mgb4_frame_buffer *buf = NULL;
+ unsigned long flags;
+ u32 addr;
+ int rv;
+
+ spin_lock_irqsave(&vindev->qlock, flags);
+ if (!list_empty(&vindev->buf_list)) {
+ buf = list_first_entry(&vindev->buf_list,
+ struct mgb4_frame_buffer, list);
+ list_del_init(vindev->buf_list.next);
+ }
+ spin_unlock_irqrestore(&vindev->qlock, flags);
+
+ if (!buf)
+ return;
+
+ addr = mgb4_read_reg(video, vindev->config->regs.address);
+ if (addr >= MGB4_ERR_QUEUE_FULL) {
+ dev_dbg(dev, "frame queue error (%d)\n", (int)addr);
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ return;
+ }
+
+ rv = mgb4_dma_transfer(vindev->mgbdev, vindev->config->dma_channel,
+ false, addr,
+ vb2_dma_sg_plane_desc(&buf->vb.vb2_buf, 0));
+ if (rv < 0) {
+ dev_warn(dev, "DMA transfer error\n");
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ } else {
+ buf->vb.vb2_buf.timestamp = ktime_get_ns();
+ buf->vb.sequence = vindev->sequence++;
+ buf->vb.field = V4L2_FIELD_NONE;
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
+ }
+}
+
+static void signal_change(struct work_struct *work)
+{
+ struct mgb4_vin_dev *vindev = container_of(work, struct mgb4_vin_dev,
+ err_work);
+ struct mgb4_regs *video = &vindev->mgbdev->video;
+ struct v4l2_bt_timings *timings = &vindev->timings.bt;
+ struct device *dev = &vindev->mgbdev->pdev->dev;
+
+ u32 resolution = mgb4_read_reg(video, vindev->config->regs.resolution);
+ u32 width = resolution >> 16;
+ u32 height = resolution & 0xFFFF;
+
+ if (timings->width != width || timings->height != height) {
+ static const struct v4l2_event ev = {
+ .type = V4L2_EVENT_SOURCE_CHANGE,
+ .u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
+ };
+
+ v4l2_event_queue(&vindev->vdev, &ev);
+
+ if (vb2_is_streaming(&vindev->queue))
+ vb2_queue_error(&vindev->queue);
+ }
+
+ dev_dbg(dev, "stream changed to %ux%u\n", width, height);
+}
+
+static irqreturn_t vin_handler(int irq, void *ctx)
+{
+ struct mgb4_vin_dev *vindev = (struct mgb4_vin_dev *)ctx;
+ struct mgb4_regs *video = &vindev->mgbdev->video;
+
+ schedule_work(&vindev->dma_work);
+
+ mgb4_write_reg(video, 0xB4, 1U << vindev->config->vin_irq);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t err_handler(int irq, void *ctx)
+{
+ struct mgb4_vin_dev *vindev = (struct mgb4_vin_dev *)ctx;
+ struct mgb4_regs *video = &vindev->mgbdev->video;
+
+ schedule_work(&vindev->err_work);
+
+ mgb4_write_reg(video, 0xB4, 1U << vindev->config->err_irq);
+
+ return IRQ_HANDLED;
+}
+
+static int deser_init(struct mgb4_vin_dev *vindev, int id)
+{
+ int rv, addr_size;
+ size_t values_count;
+ const struct mgb4_i2c_kv *values;
+ const struct i2c_board_info *info;
+ struct device *dev = &vindev->mgbdev->pdev->dev;
+
+ if (MGB4_IS_GMSL(vindev->mgbdev)) {
+ info = &gmsl_deser_info[id];
+ addr_size = 16;
+ values = gmsl_i2c;
+ values_count = ARRAY_SIZE(gmsl_i2c);
+ } else {
+ info = &fpdl3_deser_info[id];
+ addr_size = 8;
+ values = fpdl3_i2c;
+ values_count = ARRAY_SIZE(fpdl3_i2c);
+ }
+
+ rv = mgb4_i2c_init(&vindev->deser, vindev->mgbdev->i2c_adap, info,
+ addr_size);
+ if (rv < 0) {
+ dev_err(dev, "failed to create deserializer\n");
+ return rv;
+ }
+ rv = mgb4_i2c_configure(&vindev->deser, values, values_count);
+ if (rv < 0) {
+ dev_err(dev, "failed to configure deserializer\n");
+ goto err_i2c_dev;
+ }
+
+ return 0;
+
+err_i2c_dev:
+ mgb4_i2c_free(&vindev->deser);
+
+ return rv;
+}
+
+static void fpga_init(struct mgb4_vin_dev *vindev)
+{
+ struct mgb4_regs *video = &vindev->mgbdev->video;
+ const struct mgb4_vin_regs *regs = &vindev->config->regs;
+
+ mgb4_write_reg(video, regs->config, 0x00000001);
+ mgb4_write_reg(video, regs->sync, 0x03E80002);
+ mgb4_write_reg(video, regs->padding, 0x00000000);
+ mgb4_write_reg(video, regs->config, 1U << 9);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void debugfs_init(struct mgb4_vin_dev *vindev)
+{
+ struct mgb4_regs *video = &vindev->mgbdev->video;
+
+ vindev->debugfs = debugfs_create_dir(vindev->vdev.name,
+ vindev->mgbdev->debugfs);
+ if (!vindev->debugfs)
+ return;
+
+ vindev->regs[0].name = "CONFIG";
+ vindev->regs[0].offset = vindev->config->regs.config;
+ vindev->regs[1].name = "STATUS";
+ vindev->regs[1].offset = vindev->config->regs.status;
+ vindev->regs[2].name = "RESOLUTION";
+ vindev->regs[2].offset = vindev->config->regs.resolution;
+ vindev->regs[3].name = "FRAME_PERIOD";
+ vindev->regs[3].offset = vindev->config->regs.frame_period;
+ vindev->regs[4].name = "HS_VS_GENER_SETTINGS";
+ vindev->regs[4].offset = vindev->config->regs.sync;
+ vindev->regs[5].name = "PCLK_FREQUENCY";
+ vindev->regs[5].offset = vindev->config->regs.pclk;
+ vindev->regs[6].name = "VIDEO_PARAMS_1";
+ vindev->regs[6].offset = vindev->config->regs.signal;
+ vindev->regs[7].name = "VIDEO_PARAMS_2";
+ vindev->regs[7].offset = vindev->config->regs.signal2;
+ vindev->regs[8].name = "PADDING_PIXELS";
+ vindev->regs[8].offset = vindev->config->regs.padding;
+
+ vindev->regset.base = video->membase;
+ vindev->regset.regs = vindev->regs;
+ vindev->regset.nregs = ARRAY_SIZE(vindev->regs);
+
+ debugfs_create_regset32("registers", 0444, vindev->debugfs,
+ &vindev->regset);
+}
+#endif
+
+struct mgb4_vin_dev *mgb4_vin_create(struct mgb4_dev *mgbdev, int id)
+{
+ int rv;
+ const struct attribute_group **groups;
+ struct mgb4_vin_dev *vindev;
+ struct pci_dev *pdev = mgbdev->pdev;
+ struct device *dev = &pdev->dev;
+ int vin_irq, err_irq;
+
+ vindev = kzalloc(sizeof(*vindev), GFP_KERNEL);
+ if (!vindev)
+ return NULL;
+
+ vindev->mgbdev = mgbdev;
+ vindev->config = &vin_cfg[id];
+
+ /* Frame queue*/
+ INIT_LIST_HEAD(&vindev->buf_list);
+ spin_lock_init(&vindev->qlock);
+
+ /* Work queues */
+ INIT_WORK(&vindev->dma_work, dma_transfer);
+ INIT_WORK(&vindev->err_work, signal_change);
+
+ /* IRQ callback */
+ vin_irq = xdma_get_user_irq(mgbdev->xdev, vindev->config->vin_irq);
+ rv = request_irq(vin_irq, vin_handler, 0, "mgb4-vin", vindev);
+ if (rv) {
+ dev_err(dev, "failed to register vin irq handler\n");
+ goto err_alloc;
+ }
+ /* Error IRQ callback */
+ err_irq = xdma_get_user_irq(mgbdev->xdev, vindev->config->err_irq);
+ rv = request_irq(err_irq, err_handler, 0, "mgb4-err", vindev);
+ if (rv) {
+ dev_err(dev, "failed to register err irq handler\n");
+ goto err_vin_irq;
+ }
+
+ /* Set the FPGA registers default values */
+ fpga_init(vindev);
+
+ /* Set the deserializer default values */
+ rv = deser_init(vindev, id);
+ if (rv)
+ goto err_err_irq;
+
+ /* V4L2 stuff init */
+ rv = v4l2_device_register(dev, &vindev->v4l2dev);
+ if (rv) {
+ dev_err(dev, "failed to register v4l2 device\n");
+ goto err_err_irq;
+ }
+
+ mutex_init(&vindev->lock);
+
+ vindev->queue.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ vindev->queue.io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
+ vindev->queue.buf_struct_size = sizeof(struct mgb4_frame_buffer);
+ vindev->queue.ops = &queue_ops;
+ vindev->queue.mem_ops = &vb2_dma_sg_memops;
+ vindev->queue.gfp_flags = GFP_DMA32;
+ vindev->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ vindev->queue.min_buffers_needed = 2;
+ vindev->queue.drv_priv = vindev;
+ vindev->queue.lock = &vindev->lock;
+ vindev->queue.dev = dev;
+ rv = vb2_queue_init(&vindev->queue);
+ if (rv) {
+ dev_err(dev, "failed to initialize vb2 queue\n");
+ goto err_v4l2_dev;
+ }
+
+ snprintf(vindev->vdev.name, sizeof(vindev->vdev.name), "mgb4-in%d",
+ id + 1);
+ vindev->vdev.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE
+ | V4L2_CAP_STREAMING;
+ vindev->vdev.fops = &video_fops;
+ vindev->vdev.ioctl_ops = &video_ioctl_ops;
+ vindev->vdev.release = video_device_release_empty;
+ vindev->vdev.v4l2_dev = &vindev->v4l2dev;
+ vindev->vdev.lock = &vindev->lock;
+ vindev->vdev.queue = &vindev->queue;
+ video_set_drvdata(&vindev->vdev, vindev);
+
+ /* Enable the video signal change watcher */
+ xdma_enable_user_irq(vindev->mgbdev->xdev, err_irq);
+
+ /* Register the video device */
+ rv = video_register_device(&vindev->vdev, VFL_TYPE_VIDEO, -1);
+ if (rv) {
+ dev_err(dev, "failed to register video device\n");
+ goto err_v4l2_dev;
+ }
+
+ /* Module sysfs attributes */
+ groups = MGB4_IS_GMSL(mgbdev)
+ ? mgb4_gmsl_in_groups : mgb4_fpdl3_in_groups;
+ rv = device_add_groups(&vindev->vdev.dev, groups);
+ if (rv) {
+ dev_err(dev, "failed to create sysfs attributes\n");
+ goto err_video_dev;
+ }
+
+#ifdef CONFIG_DEBUG_FS
+ debugfs_init(vindev);
+#endif
+
+ return vindev;
+
+err_video_dev:
+ video_unregister_device(&vindev->vdev);
+err_v4l2_dev:
+ v4l2_device_unregister(&vindev->v4l2dev);
+err_err_irq:
+ free_irq(err_irq, vindev);
+err_vin_irq:
+ free_irq(vin_irq, vindev);
+err_alloc:
+ kfree(vindev);
+
+ return NULL;
+}
+
+void mgb4_vin_free(struct mgb4_vin_dev *vindev)
+{
+ const struct attribute_group **groups;
+ int vin_irq = xdma_get_user_irq(vindev->mgbdev->xdev,
+ vindev->config->vin_irq);
+ int err_irq = xdma_get_user_irq(vindev->mgbdev->xdev,
+ vindev->config->err_irq);
+
+ xdma_disable_user_irq(vindev->mgbdev->xdev, err_irq);
+
+ free_irq(vin_irq, vindev);
+ free_irq(err_irq, vindev);
+
+#ifdef CONFIG_DEBUG_FS
+ debugfs_remove_recursive(vindev->debugfs);
+#endif
+
+ groups = MGB4_IS_GMSL(vindev->mgbdev)
+ ? mgb4_gmsl_in_groups : mgb4_fpdl3_in_groups;
+ device_remove_groups(&vindev->vdev.dev, groups);
+
+ mgb4_i2c_free(&vindev->deser);
+ video_unregister_device(&vindev->vdev);
+ v4l2_device_unregister(&vindev->v4l2dev);
+
+ kfree(vindev);
+}
diff --git a/drivers/media/pci/mgb4/mgb4_vin.h b/drivers/media/pci/mgb4/mgb4_vin.h
new file mode 100644
index 000000000000..0249b400ad4d
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_vin.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021-2023 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ */
+
+#ifndef __MGB4_VIN_H__
+#define __MGB4_VIN_H__
+
+#include <media/v4l2-device.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-ctrls.h>
+#include <media/videobuf2-core.h>
+#include <linux/debugfs.h>
+#include "mgb4_i2c.h"
+
+struct mgb4_vin_regs {
+ u32 address;
+ u32 config;
+ u32 status;
+ u32 resolution;
+ u32 frame_period;
+ u32 sync;
+ u32 pclk;
+ u32 signal;
+ u32 signal2;
+ u32 padding;
+};
+
+struct mgb4_vin_config {
+ int id;
+ int dma_channel;
+ int vin_irq;
+ int err_irq;
+ struct mgb4_vin_regs regs;
+};
+
+struct mgb4_vin_dev {
+ struct mgb4_dev *mgbdev;
+ struct v4l2_device v4l2dev;
+ struct video_device vdev;
+ struct vb2_queue queue;
+ struct mutex lock; /* vdev lock */
+
+ spinlock_t qlock; /* video buffer queue lock */
+ struct list_head buf_list;
+ struct work_struct dma_work, err_work;
+
+ unsigned int sequence;
+
+ struct v4l2_dv_timings timings;
+ u32 freq_range;
+ u32 padding;
+
+ struct mgb4_i2c_client deser;
+
+ const struct mgb4_vin_config *config;
+
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *debugfs;
+ struct debugfs_regset32 regset;
+ struct debugfs_reg32 regs[9];
+#endif
+};
+
+struct mgb4_vin_dev *mgb4_vin_create(struct mgb4_dev *mgbdev, int id);
+void mgb4_vin_free(struct mgb4_vin_dev *vindev);
+
+#endif
diff --git a/drivers/media/pci/mgb4/mgb4_vout.c b/drivers/media/pci/mgb4/mgb4_vout.c
new file mode 100644
index 000000000000..857fc7bbd21a
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_vout.c
@@ -0,0 +1,602 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021-2023 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ *
+ * This is the v4l2 output device module. It initializes the signal serializers
+ * and creates the v4l2 video devices.
+ *
+ * When the device is in loopback mode (a direct, in HW, in->out frame passing
+ * mode) we disable the v4l2 output by returning EBUSY in the open() syscall.
+ */
+
+#include <linux/pci.h>
+#include <linux/align.h>
+#include <linux/dma/amd_xdma.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-v4l2.h>
+#include <media/videobuf2-dma-sg.h>
+#include "mgb4_core.h"
+#include "mgb4_dma.h"
+#include "mgb4_sysfs.h"
+#include "mgb4_io.h"
+#include "mgb4_cmt.h"
+#include "mgb4_vout.h"
+
+ATTRIBUTE_GROUPS(mgb4_fpdl3_out);
+ATTRIBUTE_GROUPS(mgb4_gmsl_out);
+
+static const struct mgb4_vout_config vout_cfg[] = {
+ {0, 0, 8, {0x78, 0x60, 0x64, 0x68, 0x74, 0x6C, 0x70, 0x7c}},
+ {1, 1, 9, {0x98, 0x80, 0x84, 0x88, 0x94, 0x8c, 0x90, 0x9c}}
+};
+
+static const struct i2c_board_info fpdl3_ser_info[] = {
+ {I2C_BOARD_INFO("serializer1", 0x14)},
+ {I2C_BOARD_INFO("serializer2", 0x16)},
+};
+
+static const struct mgb4_i2c_kv fpdl3_i2c[] = {
+ {0x05, 0xFF, 0x04}, {0x06, 0xFF, 0x01}, {0xC2, 0xFF, 0x80}
+};
+
+static void return_all_buffers(struct mgb4_vout_dev *voutdev,
+ enum vb2_buffer_state state)
+{
+ struct mgb4_frame_buffer *buf, *node;
+ unsigned long flags;
+
+ spin_lock_irqsave(&voutdev->qlock, flags);
+ list_for_each_entry_safe(buf, node, &voutdev->buf_list, list) {
+ vb2_buffer_done(&buf->vb.vb2_buf, state);
+ list_del(&buf->list);
+ }
+ spin_unlock_irqrestore(&voutdev->qlock, flags);
+}
+
+static int queue_setup(struct vb2_queue *q, unsigned int *nbuffers,
+ unsigned int *nplanes, unsigned int sizes[],
+ struct device *alloc_devs[])
+{
+ struct mgb4_vout_dev *voutdev = vb2_get_drv_priv(q);
+ unsigned int size;
+
+ /*
+ * If I/O reconfiguration is in process, do not allow to start
+ * the queue. See video_source_store() in mgb4_sysfs_out.c for
+ * details.
+ */
+ if (test_bit(0, &voutdev->mgbdev->io_reconfig))
+ return -EBUSY;
+
+ size = (voutdev->width + voutdev->padding) * voutdev->height * 4;
+
+ if (*nplanes)
+ return sizes[0] < size ? -EINVAL : 0;
+ *nplanes = 1;
+ sizes[0] = size;
+
+ return 0;
+}
+
+static int buffer_init(struct vb2_buffer *vb)
+{
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct mgb4_frame_buffer *buf = to_frame_buffer(vbuf);
+
+ INIT_LIST_HEAD(&buf->list);
+
+ return 0;
+}
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+ struct mgb4_vout_dev *voutdev = vb2_get_drv_priv(vb->vb2_queue);
+ struct device *dev = &voutdev->mgbdev->pdev->dev;
+ unsigned int size;
+
+ size = (voutdev->width + voutdev->padding) * voutdev->height * 4;
+
+ if (vb2_plane_size(vb, 0) < size) {
+ dev_err(dev, "buffer too small (%lu < %u)\n",
+ vb2_plane_size(vb, 0), size);
+ return -EINVAL;
+ }
+
+ vb2_set_plane_payload(vb, 0, size);
+
+ return 0;
+}
+
+static void buffer_queue(struct vb2_buffer *vb)
+{
+ struct mgb4_vout_dev *vindev = vb2_get_drv_priv(vb->vb2_queue);
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct mgb4_frame_buffer *buf = to_frame_buffer(vbuf);
+ unsigned long flags;
+
+ spin_lock_irqsave(&vindev->qlock, flags);
+ list_add_tail(&buf->list, &vindev->buf_list);
+ spin_unlock_irqrestore(&vindev->qlock, flags);
+}
+
+static void stop_streaming(struct vb2_queue *vq)
+{
+ struct mgb4_vout_dev *voutdev = vb2_get_drv_priv(vq);
+ struct mgb4_dev *mgbdev = voutdev->mgbdev;
+ int irq = xdma_get_user_irq(mgbdev->xdev, voutdev->config->irq);
+
+ xdma_disable_user_irq(mgbdev->xdev, irq);
+ cancel_work_sync(&voutdev->dma_work);
+ mgb4_mask_reg(&mgbdev->video, voutdev->config->regs.config, 0x2, 0x0);
+ return_all_buffers(voutdev, VB2_BUF_STATE_ERROR);
+}
+
+static int start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+ struct mgb4_vout_dev *voutdev = vb2_get_drv_priv(vq);
+ struct mgb4_dev *mgbdev = voutdev->mgbdev;
+ struct device *dev = &mgbdev->pdev->dev;
+ struct mgb4_frame_buffer *buf;
+ struct mgb4_regs *video = &mgbdev->video;
+ const struct mgb4_vout_config *config = voutdev->config;
+ int irq = xdma_get_user_irq(mgbdev->xdev, config->irq);
+ int rv;
+ u32 addr;
+
+ mgb4_mask_reg(video, config->regs.config, 0x2, 0x2);
+
+ addr = mgb4_read_reg(video, config->regs.address);
+ if (addr >= MGB4_ERR_QUEUE_FULL) {
+ dev_dbg(dev, "frame queue error (%d)\n", (int)addr);
+ return_all_buffers(voutdev, VB2_BUF_STATE_QUEUED);
+ return -EBUSY;
+ }
+
+ buf = list_first_entry(&voutdev->buf_list, struct mgb4_frame_buffer,
+ list);
+ list_del_init(voutdev->buf_list.next);
+
+ rv = mgb4_dma_transfer(mgbdev, config->dma_channel, true, addr,
+ vb2_dma_sg_plane_desc(&buf->vb.vb2_buf, 0));
+ if (rv < 0) {
+ dev_warn(dev, "DMA transfer error\n");
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ } else {
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
+ }
+
+ xdma_enable_user_irq(mgbdev->xdev, irq);
+
+ return 0;
+}
+
+static const struct vb2_ops queue_ops = {
+ .queue_setup = queue_setup,
+ .buf_init = buffer_init,
+ .buf_prepare = buffer_prepare,
+ .buf_queue = buffer_queue,
+ .start_streaming = start_streaming,
+ .stop_streaming = stop_streaming,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish
+};
+
+static int vidioc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
+ strscpy(cap->card, "MGB4 PCIe Card", sizeof(cap->card));
+
+ return 0;
+}
+
+static int vidioc_enum_fmt(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ if (f->index != 0)
+ return -EINVAL;
+
+ f->pixelformat = V4L2_PIX_FMT_ABGR32;
+
+ return 0;
+}
+
+static int vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct mgb4_vout_dev *voutdev = video_drvdata(file);
+
+ f->fmt.pix.pixelformat = V4L2_PIX_FMT_ABGR32;
+ f->fmt.pix.width = voutdev->width;
+ f->fmt.pix.height = voutdev->height;
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_RAW;
+ f->fmt.pix.bytesperline = (f->fmt.pix.width + voutdev->padding) * 4;
+ f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * f->fmt.pix.height;
+
+ return 0;
+}
+
+static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct mgb4_vout_dev *voutdev = video_drvdata(file);
+
+ f->fmt.pix.pixelformat = V4L2_PIX_FMT_ABGR32;
+ f->fmt.pix.width = voutdev->width;
+ f->fmt.pix.height = voutdev->height;
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_RAW;
+ f->fmt.pix.bytesperline = max(f->fmt.pix.width * 4,
+ ALIGN_DOWN(f->fmt.pix.bytesperline, 4));
+ f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * f->fmt.pix.height;
+
+ return 0;
+}
+
+static int vidioc_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct mgb4_vout_dev *voutdev = video_drvdata(file);
+ struct mgb4_regs *video = &voutdev->mgbdev->video;
+
+ if (vb2_is_busy(&voutdev->queue))
+ return -EBUSY;
+
+ vidioc_try_fmt(file, priv, f);
+
+ voutdev->padding = (f->fmt.pix.bytesperline - (f->fmt.pix.width * 4)) / 4;
+ mgb4_write_reg(video, voutdev->config->regs.padding, voutdev->padding);
+
+ return 0;
+}
+
+static int vidioc_g_output(struct file *file, void *priv, unsigned int *i)
+{
+ *i = 0;
+ return 0;
+}
+
+static int vidioc_s_output(struct file *file, void *priv, unsigned int i)
+{
+ return i ? -EINVAL : 0;
+}
+
+static int vidioc_enum_output(struct file *file, void *priv,
+ struct v4l2_output *out)
+{
+ if (out->index != 0)
+ return -EINVAL;
+
+ out->type = V4L2_OUTPUT_TYPE_ANALOG;
+ strscpy(out->name, "MGB4", sizeof(out->name));
+
+ return 0;
+}
+
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
+ .vidioc_querycap = vidioc_querycap,
+ .vidioc_enum_fmt_vid_out = vidioc_enum_fmt,
+ .vidioc_try_fmt_vid_out = vidioc_try_fmt,
+ .vidioc_s_fmt_vid_out = vidioc_s_fmt,
+ .vidioc_g_fmt_vid_out = vidioc_g_fmt,
+ .vidioc_enum_output = vidioc_enum_output,
+ .vidioc_g_output = vidioc_g_output,
+ .vidioc_s_output = vidioc_s_output,
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+};
+
+static int fh_open(struct file *file)
+{
+ struct mgb4_vout_dev *voutdev = video_drvdata(file);
+ struct mgb4_regs *video = &voutdev->mgbdev->video;
+ struct device *dev = &voutdev->mgbdev->pdev->dev;
+ u32 config, resolution;
+ int rv;
+
+ /* Return EBUSY when the device is in loopback mode */
+ config = mgb4_read_reg(video, voutdev->config->regs.config);
+ if ((config & 0xc) >> 2 != voutdev->config->id + MGB4_VIN_DEVICES) {
+ dev_dbg(dev, "can not open - device in loopback mode");
+ return -EBUSY;
+ }
+
+ mutex_lock(&voutdev->lock);
+
+ rv = v4l2_fh_open(file);
+ if (rv)
+ goto out;
+
+ if (!v4l2_fh_is_singular_file(file))
+ goto out;
+
+ resolution = mgb4_read_reg(video, voutdev->config->regs.resolution);
+ voutdev->width = resolution >> 16;
+ voutdev->height = resolution & 0xFFFF;
+
+out:
+ mutex_unlock(&voutdev->lock);
+ return rv;
+}
+
+static const struct v4l2_file_operations video_fops = {
+ .owner = THIS_MODULE,
+ .open = fh_open,
+ .release = vb2_fop_release,
+ .unlocked_ioctl = video_ioctl2,
+ .write = vb2_fop_write,
+ .mmap = vb2_fop_mmap,
+ .poll = vb2_fop_poll,
+};
+
+static void dma_transfer(struct work_struct *work)
+{
+ struct mgb4_vout_dev *voutdev = container_of(work, struct mgb4_vout_dev,
+ dma_work);
+ struct device *dev = &voutdev->mgbdev->pdev->dev;
+ struct mgb4_regs *video = &voutdev->mgbdev->video;
+ struct mgb4_frame_buffer *buf = NULL;
+ unsigned long flags;
+ u32 addr;
+ int rv;
+
+ spin_lock_irqsave(&voutdev->qlock, flags);
+ if (!list_empty(&voutdev->buf_list)) {
+ buf = list_first_entry(&voutdev->buf_list,
+ struct mgb4_frame_buffer, list);
+ list_del_init(voutdev->buf_list.next);
+ }
+ spin_unlock_irqrestore(&voutdev->qlock, flags);
+
+ if (!buf)
+ return;
+
+ addr = mgb4_read_reg(video, voutdev->config->regs.address);
+ if (addr >= MGB4_ERR_QUEUE_FULL) {
+ dev_dbg(dev, "frame queue error (%d)\n", (int)addr);
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ return;
+ }
+
+ rv = mgb4_dma_transfer(voutdev->mgbdev, voutdev->config->dma_channel,
+ true, addr,
+ vb2_dma_sg_plane_desc(&buf->vb.vb2_buf, 0));
+ if (rv < 0) {
+ dev_warn(dev, "DMA transfer error\n");
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ } else {
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
+ }
+}
+
+static irqreturn_t handler(int irq, void *ctx)
+{
+ struct mgb4_vout_dev *voutdev = (struct mgb4_vout_dev *)ctx;
+ struct mgb4_regs *video = &voutdev->mgbdev->video;
+
+ schedule_work(&voutdev->dma_work);
+
+ mgb4_write_reg(video, 0xB4, 1U << voutdev->config->irq);
+
+ return IRQ_HANDLED;
+}
+
+static int ser_init(struct mgb4_vout_dev *voutdev, int id)
+{
+ int rv;
+ const struct i2c_board_info *info = &fpdl3_ser_info[id];
+ struct mgb4_i2c_client *ser = &voutdev->ser;
+ struct device *dev = &voutdev->mgbdev->pdev->dev;
+
+ if (MGB4_IS_GMSL(voutdev->mgbdev))
+ return 0;
+
+ rv = mgb4_i2c_init(ser, voutdev->mgbdev->i2c_adap, info, 8);
+ if (rv < 0) {
+ dev_err(dev, "failed to create serializer\n");
+ return rv;
+ }
+ rv = mgb4_i2c_configure(ser, fpdl3_i2c, ARRAY_SIZE(fpdl3_i2c));
+ if (rv < 0) {
+ dev_err(dev, "failed to configure serializer\n");
+ goto err_i2c_dev;
+ }
+
+ return 0;
+
+err_i2c_dev:
+ mgb4_i2c_free(ser);
+
+ return rv;
+}
+
+static void fpga_init(struct mgb4_vout_dev *voutdev)
+{
+ struct mgb4_regs *video = &voutdev->mgbdev->video;
+ const struct mgb4_vout_regs *regs = &voutdev->config->regs;
+
+ mgb4_write_reg(video, regs->config, 0x00000011);
+ mgb4_write_reg(video, regs->resolution,
+ (MGB4_DEFAULT_WIDTH << 16) | MGB4_DEFAULT_HEIGHT);
+ mgb4_write_reg(video, regs->hsync, 0x00102020);
+ mgb4_write_reg(video, regs->vsync, 0x40020202);
+ mgb4_write_reg(video, regs->frame_period, MGB4_DEFAULT_PERIOD);
+ mgb4_write_reg(video, regs->padding, 0x00000000);
+
+ voutdev->freq = mgb4_cmt_set_vout_freq(voutdev, 70000 >> 1) << 1;
+
+ mgb4_write_reg(video, regs->config,
+ (voutdev->config->id + MGB4_VIN_DEVICES) << 2 | 1 << 4);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void debugfs_init(struct mgb4_vout_dev *voutdev)
+{
+ struct mgb4_regs *video = &voutdev->mgbdev->video;
+
+ voutdev->debugfs = debugfs_create_dir(voutdev->vdev.name,
+ voutdev->mgbdev->debugfs);
+ if (!voutdev->debugfs)
+ return;
+
+ voutdev->regs[0].name = "CONFIG";
+ voutdev->regs[0].offset = voutdev->config->regs.config;
+ voutdev->regs[1].name = "STATUS";
+ voutdev->regs[1].offset = voutdev->config->regs.status;
+ voutdev->regs[2].name = "RESOLUTION";
+ voutdev->regs[2].offset = voutdev->config->regs.resolution;
+ voutdev->regs[3].name = "VIDEO_PARAMS_1";
+ voutdev->regs[3].offset = voutdev->config->regs.hsync;
+ voutdev->regs[4].name = "VIDEO_PARAMS_2";
+ voutdev->regs[4].offset = voutdev->config->regs.vsync;
+ voutdev->regs[5].name = "FRAME_PERIOD";
+ voutdev->regs[5].offset = voutdev->config->regs.frame_period;
+ voutdev->regs[6].name = "PADDING";
+ voutdev->regs[6].offset = voutdev->config->regs.padding;
+
+ voutdev->regset.base = video->membase;
+ voutdev->regset.regs = voutdev->regs;
+ voutdev->regset.nregs = ARRAY_SIZE(voutdev->regs);
+
+ debugfs_create_regset32("registers", 0444, voutdev->debugfs,
+ &voutdev->regset);
+}
+#endif
+
+struct mgb4_vout_dev *mgb4_vout_create(struct mgb4_dev *mgbdev, int id)
+{
+ int rv, irq;
+ const struct attribute_group **groups;
+ struct mgb4_vout_dev *voutdev;
+ struct pci_dev *pdev = mgbdev->pdev;
+ struct device *dev = &pdev->dev;
+
+ voutdev = kzalloc(sizeof(*voutdev), GFP_KERNEL);
+ if (!voutdev)
+ return NULL;
+
+ voutdev->mgbdev = mgbdev;
+ voutdev->config = &vout_cfg[id];
+
+ /* Frame queue */
+ INIT_LIST_HEAD(&voutdev->buf_list);
+ spin_lock_init(&voutdev->qlock);
+
+ /* DMA transfer stuff */
+ INIT_WORK(&voutdev->dma_work, dma_transfer);
+
+ /* IRQ callback */
+ irq = xdma_get_user_irq(mgbdev->xdev, voutdev->config->irq);
+ rv = request_irq(irq, handler, 0, "mgb4-vout", voutdev);
+ if (rv) {
+ dev_err(dev, "failed to register irq handler\n");
+ goto err_alloc;
+ }
+
+ /* Set the FPGA registers default values */
+ fpga_init(voutdev);
+
+ /* Set the serializer default values */
+ rv = ser_init(voutdev, id);
+ if (rv)
+ goto err_irq;
+
+ /* V4L2 stuff init */
+ rv = v4l2_device_register(dev, &voutdev->v4l2dev);
+ if (rv) {
+ dev_err(dev, "failed to register v4l2 device\n");
+ goto err_irq;
+ }
+
+ mutex_init(&voutdev->lock);
+
+ voutdev->queue.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+ voutdev->queue.io_modes = VB2_MMAP | VB2_DMABUF | VB2_WRITE;
+ voutdev->queue.buf_struct_size = sizeof(struct mgb4_frame_buffer);
+ voutdev->queue.ops = &queue_ops;
+ voutdev->queue.mem_ops = &vb2_dma_sg_memops;
+ voutdev->queue.gfp_flags = GFP_DMA32;
+ voutdev->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ voutdev->queue.min_buffers_needed = 2;
+ voutdev->queue.drv_priv = voutdev;
+ voutdev->queue.lock = &voutdev->lock;
+ voutdev->queue.dev = dev;
+ rv = vb2_queue_init(&voutdev->queue);
+ if (rv) {
+ dev_err(dev, "failed to initialize vb2 queue\n");
+ goto err_v4l2_dev;
+ }
+
+ snprintf(voutdev->vdev.name, sizeof(voutdev->vdev.name), "mgb4-out%d",
+ id + 1);
+ voutdev->vdev.device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_READWRITE
+ | V4L2_CAP_STREAMING;
+ voutdev->vdev.vfl_dir = VFL_DIR_TX;
+ voutdev->vdev.fops = &video_fops;
+ voutdev->vdev.ioctl_ops = &video_ioctl_ops;
+ voutdev->vdev.release = video_device_release_empty;
+ voutdev->vdev.v4l2_dev = &voutdev->v4l2dev;
+ voutdev->vdev.lock = &voutdev->lock;
+ voutdev->vdev.queue = &voutdev->queue;
+ video_set_drvdata(&voutdev->vdev, voutdev);
+
+ rv = video_register_device(&voutdev->vdev, VFL_TYPE_VIDEO, -1);
+ if (rv) {
+ dev_err(dev, "failed to register video device\n");
+ goto err_v4l2_dev;
+ }
+
+ /* Module sysfs attributes */
+ groups = MGB4_IS_GMSL(mgbdev)
+ ? mgb4_gmsl_out_groups : mgb4_fpdl3_out_groups;
+ rv = device_add_groups(&voutdev->vdev.dev, groups);
+ if (rv) {
+ dev_err(dev, "failed to create sysfs attributes\n");
+ goto err_video_dev;
+ }
+
+#ifdef CONFIG_DEBUG_FS
+ debugfs_init(voutdev);
+#endif
+
+ return voutdev;
+
+err_video_dev:
+ video_unregister_device(&voutdev->vdev);
+err_v4l2_dev:
+ v4l2_device_unregister(&voutdev->v4l2dev);
+err_irq:
+ free_irq(irq, voutdev);
+err_alloc:
+ kfree(voutdev);
+
+ return NULL;
+}
+
+void mgb4_vout_free(struct mgb4_vout_dev *voutdev)
+{
+ const struct attribute_group **groups;
+ int irq = xdma_get_user_irq(voutdev->mgbdev->xdev, voutdev->config->irq);
+
+ free_irq(irq, voutdev);
+
+#ifdef CONFIG_DEBUG_FS
+ debugfs_remove_recursive(voutdev->debugfs);
+#endif
+
+ groups = MGB4_IS_GMSL(voutdev->mgbdev)
+ ? mgb4_gmsl_out_groups : mgb4_fpdl3_out_groups;
+ device_remove_groups(&voutdev->vdev.dev, groups);
+
+ mgb4_i2c_free(&voutdev->ser);
+ video_unregister_device(&voutdev->vdev);
+ v4l2_device_unregister(&voutdev->v4l2dev);
+
+ kfree(voutdev);
+}
diff --git a/drivers/media/pci/mgb4/mgb4_vout.h b/drivers/media/pci/mgb4/mgb4_vout.h
new file mode 100644
index 000000000000..b163dee711fd
--- /dev/null
+++ b/drivers/media/pci/mgb4/mgb4_vout.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021-2023 Digiteq Automotive
+ * author: Martin Tuma <[email protected]>
+ */
+
+#ifndef __MGB4_VOUT_H__
+#define __MGB4_VOUT_H__
+
+#include <media/v4l2-device.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-ctrls.h>
+#include <media/videobuf2-core.h>
+#include <linux/debugfs.h>
+#include "mgb4_i2c.h"
+
+struct mgb4_vout_regs {
+ u32 address;
+ u32 config;
+ u32 status;
+ u32 resolution;
+ u32 frame_period;
+ u32 hsync;
+ u32 vsync;
+ u32 padding;
+};
+
+struct mgb4_vout_config {
+ int id;
+ int dma_channel;
+ int irq;
+ struct mgb4_vout_regs regs;
+};
+
+struct mgb4_vout_dev {
+ struct mgb4_dev *mgbdev;
+ struct v4l2_device v4l2dev;
+ struct video_device vdev;
+ struct vb2_queue queue;
+ struct mutex lock; /* vdev lock */
+
+ spinlock_t qlock; /* buffer queue lock */
+ struct list_head buf_list;
+ struct work_struct dma_work;
+
+ u32 width;
+ u32 height;
+ u32 freq;
+ u32 padding;
+
+ struct mgb4_i2c_client ser;
+
+ const struct mgb4_vout_config *config;
+
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *debugfs;
+ struct debugfs_regset32 regset;
+ struct debugfs_reg32 regs[7];
+#endif
+};
+
+struct mgb4_vout_dev *mgb4_vout_create(struct mgb4_dev *mgbdev, int id);
+void mgb4_vout_free(struct mgb4_vout_dev *voutdev);
+
+#endif
--
2.40.1
Hi Martin,
Thank you for your work and patience!
I've just merged this v11, it all looked good to me.
Regards,
Hans
On 25/09/2023 16:36, [email protected] wrote:
> From: Martin Tůma <[email protected]>
>
> Hi,
> This patch adds a driver for the Digiteq Automotive MGB4 grabber card.
> MGB4 is a modular frame grabber PCIe card for automotive video interfaces
> (FPD-Link and GMSL for now). It is based on a Xilinx FPGA and uses their
> XDMA IP core for DMA transfers. Additionally, Xilinx I2C and SPI IP cores
> which already have drivers in linux are used in the design.
>
> The driver is a quite standard v4l2 driver, with one exception - there are
> a lot of sysfs options that may/must be set before opening the v4l2 device
> to adapt the card on a specific signal (see mgb4.rst for details)
> as the card must be able to work with various signal sources (or displays)
> that can not be auto-detected.
>
> Changes in v11
> * Fixed broken video buffer size check.
> * Documented video queue checks/locking during I/O reconfiguration and signal
> parameters changes.
>
> Changes in v10:
> * Use propper locks/is_busy functions when accessing the video devices in
> the sysfs callbacks.
> * Fixed issues found by the sparse/smatch tools.
>
> Changes in v9:
> * Renamed all sysfs show/store functions using the propper naming convention.
> * Now using device_add_groups() when initializing the sysfs properties.
> * Fixed build without debugfs support.
> * Fixed documentation (vsync/hsync) + added default values where applicable.
> * Fixed the rest of minor issues from v8 review.
>
> Changes in v8:
> * Fixed broken video buffer size computation.
> * Fixed switched I2C deserializers addresses.
> * Do not depend on hwmon.
>
> Changes in v7:
> * Now using hwmon for FPGA temperature reporting.
> * Now using VIDIOC_S_FMT and v4l2_pix_format.bytesperline for setting
> the alignment.
> * Removed the magic sleep when loading the i2c/spi adapter modules (solved by
> request_module() calls with propper - "platform:" prefixed - module
> names).
> * Now properly reporting all the timings info in the VIDIOC_G_DV_TIMINGS
> ioctls.
> * Updated the documentation.
> * Minor fixes as discussed in the v6 review.
> * Added debugfs access to the FPGA registers.
>
> Changes in v6:
> * Rebased to current master that includes the Xilinx XDMA driver.
>
> Changes in v5:
> * Removed unused <linux/version.h> includes
>
> Changes in v4:
> * Redesigned the signal change handling logic. Now using the propper timings
> API in the video input driver and a propper open() syscall check/logic in
> the video output driver.
> * Fixed all minor issues from v3 review.
> * 'checkpatch.pl --strict' used for checking the code.
>
> Changes in v3:
> * Rebased the DMA transfers part to use the new XDMA driver from Xilinx/AMD
>
> Changes in v2:
> * Completely rewritten the original Xilinx's XDMA driver to meet kernel code
> standards.
> * Added all required "to" and "cc" mail addresses.
>
>
> ===== v4l2-compliance results - input =====
>
> v4l2-compliance 1.24.1, 64 bits, 64-bit time_t
>
> Compliance test for mgb4 device /dev/video0:
>
> Driver Info:
> Driver name : mgb4
> Card type : MGB4 PCIe Card
> Bus info : PCI:0000:01:00.0
> Driver version : 6.4.0
> Capabilities : 0x85200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x05200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
> test invalid ioctls: OK
>
> Allow for multiple opens:
> test second /dev/video0 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
> test VIDIOC_DV_TIMINGS_CAP: OK
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls (Input 0):
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> warn: v4l2-test-controls.cpp(1139): V4L2_CID_DV_RX_POWER_PRESENT not found for input 0
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls (Input 0):
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls (Input 0):
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls (Input 0):
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
>
> Total for mgb4 device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 1
>
> ===== v4l2-compliance results - output =====
>
> v4l2-compliance 1.24.1, 64 bits, 64-bit time_t
>
> Compliance test for mgb4 device /dev/video2:
>
> Driver Info:
> Driver name : mgb4
> Card type : MGB4 PCIe Card
> Bus info : PCI:0000:01:00.0
> Driver version : 6.4.0
> Capabilities : 0x85200002
> Video Output
> Read/Write
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x05200002
> Video Output
> Read/Write
> Streaming
> Extended Pix Format
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
> test invalid ioctls: OK
>
> Allow for multiple opens:
> test second /dev/video2 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 1 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls (Output 0):
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls (Output 0):
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls (Output 0):
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls (Output 0):
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
>
> Total for mgb4 device /dev/video2: 45, Succeeded: 45, Failed: 0, Warnings: 0
>
> Martin Tůma (2):
> Added Digiteq Automotive MGB4 driver
> Added Digiteq Automotive MGB4 driver documentation
>
> Documentation/admin-guide/media/mgb4.rst | 374 +++++++
> .../admin-guide/media/pci-cardlist.rst | 1 +
> .../admin-guide/media/v4l-drivers.rst | 1 +
> MAINTAINERS | 7 +
> drivers/media/pci/Kconfig | 1 +
> drivers/media/pci/Makefile | 1 +
> drivers/media/pci/mgb4/Kconfig | 17 +
> drivers/media/pci/mgb4/Makefile | 6 +
> drivers/media/pci/mgb4/mgb4_cmt.c | 244 +++++
> drivers/media/pci/mgb4/mgb4_cmt.h | 17 +
> drivers/media/pci/mgb4/mgb4_core.c | 686 +++++++++++++
> drivers/media/pci/mgb4/mgb4_core.h | 74 ++
> drivers/media/pci/mgb4/mgb4_dma.c | 123 +++
> drivers/media/pci/mgb4/mgb4_dma.h | 18 +
> drivers/media/pci/mgb4/mgb4_i2c.c | 140 +++
> drivers/media/pci/mgb4/mgb4_i2c.h | 35 +
> drivers/media/pci/mgb4/mgb4_io.h | 33 +
> drivers/media/pci/mgb4/mgb4_regs.c | 30 +
> drivers/media/pci/mgb4/mgb4_regs.h | 35 +
> drivers/media/pci/mgb4/mgb4_sysfs.h | 18 +
> drivers/media/pci/mgb4/mgb4_sysfs_in.c | 772 ++++++++++++++
> drivers/media/pci/mgb4/mgb4_sysfs_out.c | 737 ++++++++++++++
> drivers/media/pci/mgb4/mgb4_sysfs_pci.c | 71 ++
> drivers/media/pci/mgb4/mgb4_trigger.c | 208 ++++
> drivers/media/pci/mgb4/mgb4_trigger.h | 8 +
> drivers/media/pci/mgb4/mgb4_vin.c | 939 ++++++++++++++++++
> drivers/media/pci/mgb4/mgb4_vin.h | 69 ++
> drivers/media/pci/mgb4/mgb4_vout.c | 602 +++++++++++
> drivers/media/pci/mgb4/mgb4_vout.h | 65 ++
> 29 files changed, 5332 insertions(+)
> create mode 100644 Documentation/admin-guide/media/mgb4.rst
> create mode 100644 drivers/media/pci/mgb4/Kconfig
> create mode 100644 drivers/media/pci/mgb4/Makefile
> create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.c
> create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.h
> create mode 100644 drivers/media/pci/mgb4/mgb4_core.c
> create mode 100644 drivers/media/pci/mgb4/mgb4_core.h
> create mode 100644 drivers/media/pci/mgb4/mgb4_dma.c
> create mode 100644 drivers/media/pci/mgb4/mgb4_dma.h
> create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.c
> create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.h
> create mode 100644 drivers/media/pci/mgb4/mgb4_io.h
> create mode 100644 drivers/media/pci/mgb4/mgb4_regs.c
> create mode 100644 drivers/media/pci/mgb4/mgb4_regs.h
> create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs.h
> create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_in.c
> create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_out.c
> create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_pci.c
> create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.c
> create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.h
> create mode 100644 drivers/media/pci/mgb4/mgb4_vin.c
> create mode 100644 drivers/media/pci/mgb4/mgb4_vin.h
> create mode 100644 drivers/media/pci/mgb4/mgb4_vout.c
> create mode 100644 drivers/media/pci/mgb4/mgb4_vout.h
>
>
> base-commit: 27bbf45eae9ca98877a2d52a92a188147cd61b07
Hi Hans,
Thank you very much for your patience and help making the driver a much
better code than what was send in the v1 patch. I will now watch
linux/master with champagne in my fridge ;-)
M.
On 27. 09. 23 14:03, Hans Verkuil wrote:
> Hi Martin,
>
> Thank you for your work and patience!
>
> I've just merged this v11, it all looked good to me.
>
> Regards,
>
> Hans
>
> On 25/09/2023 16:36, [email protected] wrote:
>> From: Martin Tůma <[email protected]>
>>
>> Hi,
>> This patch adds a driver for the Digiteq Automotive MGB4 grabber card.
>> MGB4 is a modular frame grabber PCIe card for automotive video interfaces
>> (FPD-Link and GMSL for now). It is based on a Xilinx FPGA and uses their
>> XDMA IP core for DMA transfers. Additionally, Xilinx I2C and SPI IP cores
>> which already have drivers in linux are used in the design.
>>
>> The driver is a quite standard v4l2 driver, with one exception - there are
>> a lot of sysfs options that may/must be set before opening the v4l2 device
>> to adapt the card on a specific signal (see mgb4.rst for details)
>> as the card must be able to work with various signal sources (or displays)
>> that can not be auto-detected.
>>
>> Changes in v11
>> * Fixed broken video buffer size check.
>> * Documented video queue checks/locking during I/O reconfiguration and signal
>> parameters changes.
>>
>> Changes in v10:
>> * Use propper locks/is_busy functions when accessing the video devices in
>> the sysfs callbacks.
>> * Fixed issues found by the sparse/smatch tools.
>>
>> Changes in v9:
>> * Renamed all sysfs show/store functions using the propper naming convention.
>> * Now using device_add_groups() when initializing the sysfs properties.
>> * Fixed build without debugfs support.
>> * Fixed documentation (vsync/hsync) + added default values where applicable.
>> * Fixed the rest of minor issues from v8 review.
>>
>> Changes in v8:
>> * Fixed broken video buffer size computation.
>> * Fixed switched I2C deserializers addresses.
>> * Do not depend on hwmon.
>>
>> Changes in v7:
>> * Now using hwmon for FPGA temperature reporting.
>> * Now using VIDIOC_S_FMT and v4l2_pix_format.bytesperline for setting
>> the alignment.
>> * Removed the magic sleep when loading the i2c/spi adapter modules (solved by
>> request_module() calls with propper - "platform:" prefixed - module
>> names).
>> * Now properly reporting all the timings info in the VIDIOC_G_DV_TIMINGS
>> ioctls.
>> * Updated the documentation.
>> * Minor fixes as discussed in the v6 review.
>> * Added debugfs access to the FPGA registers.
>>
>> Changes in v6:
>> * Rebased to current master that includes the Xilinx XDMA driver.
>>
>> Changes in v5:
>> * Removed unused <linux/version.h> includes
>>
>> Changes in v4:
>> * Redesigned the signal change handling logic. Now using the propper timings
>> API in the video input driver and a propper open() syscall check/logic in
>> the video output driver.
>> * Fixed all minor issues from v3 review.
>> * 'checkpatch.pl --strict' used for checking the code.
>>
>> Changes in v3:
>> * Rebased the DMA transfers part to use the new XDMA driver from Xilinx/AMD
>>
>> Changes in v2:
>> * Completely rewritten the original Xilinx's XDMA driver to meet kernel code
>> standards.
>> * Added all required "to" and "cc" mail addresses.
>>
>>
>> ===== v4l2-compliance results - input =====
>>
>> v4l2-compliance 1.24.1, 64 bits, 64-bit time_t
>>
>> Compliance test for mgb4 device /dev/video0:
>>
>> Driver Info:
>> Driver name : mgb4
>> Card type : MGB4 PCIe Card
>> Bus info : PCI:0000:01:00.0
>> Driver version : 6.4.0
>> Capabilities : 0x85200001
>> Video Capture
>> Read/Write
>> Streaming
>> Extended Pix Format
>> Device Capabilities
>> Device Caps : 0x05200001
>> Video Capture
>> Read/Write
>> Streaming
>> Extended Pix Format
>>
>> Required ioctls:
>> test VIDIOC_QUERYCAP: OK
>> test invalid ioctls: OK
>>
>> Allow for multiple opens:
>> test second /dev/video0 open: OK
>> test VIDIOC_QUERYCAP: OK
>> test VIDIOC_G/S_PRIORITY: OK
>> test for unlimited opens: OK
>>
>> Debug ioctls:
>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>> test VIDIOC_LOG_STATUS: OK (Not Supported)
>>
>> Input ioctls:
>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
>> test VIDIOC_G/S/ENUMINPUT: OK
>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
>> Inputs: 1 Audio Inputs: 0 Tuners: 0
>>
>> Output ioctls:
>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>> Outputs: 0 Audio Outputs: 0 Modulators: 0
>>
>> Input/Output configuration ioctls:
>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
>> test VIDIOC_DV_TIMINGS_CAP: OK
>> test VIDIOC_G/S_EDID: OK (Not Supported)
>>
>> Control ioctls (Input 0):
>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
>> test VIDIOC_QUERYCTRL: OK (Not Supported)
>> test VIDIOC_G/S_CTRL: OK (Not Supported)
>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
>> warn: v4l2-test-controls.cpp(1139): V4L2_CID_DV_RX_POWER_PRESENT not found for input 0
>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>> Standard Controls: 0 Private Controls: 0
>>
>> Format ioctls (Input 0):
>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>> test VIDIOC_G/S_PARM: OK
>> test VIDIOC_G_FBUF: OK (Not Supported)
>> test VIDIOC_G_FMT: OK
>> test VIDIOC_TRY_FMT: OK
>> test VIDIOC_S_FMT: OK
>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>> test Cropping: OK (Not Supported)
>> test Composing: OK (Not Supported)
>> test Scaling: OK (Not Supported)
>>
>> Codec ioctls (Input 0):
>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>
>> Buffer ioctls (Input 0):
>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>> test VIDIOC_EXPBUF: OK
>> test Requests: OK (Not Supported)
>>
>> Total for mgb4 device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 1
>>
>> ===== v4l2-compliance results - output =====
>>
>> v4l2-compliance 1.24.1, 64 bits, 64-bit time_t
>>
>> Compliance test for mgb4 device /dev/video2:
>>
>> Driver Info:
>> Driver name : mgb4
>> Card type : MGB4 PCIe Card
>> Bus info : PCI:0000:01:00.0
>> Driver version : 6.4.0
>> Capabilities : 0x85200002
>> Video Output
>> Read/Write
>> Streaming
>> Extended Pix Format
>> Device Capabilities
>> Device Caps : 0x05200002
>> Video Output
>> Read/Write
>> Streaming
>> Extended Pix Format
>>
>> Required ioctls:
>> test VIDIOC_QUERYCAP: OK
>> test invalid ioctls: OK
>>
>> Allow for multiple opens:
>> test second /dev/video2 open: OK
>> test VIDIOC_QUERYCAP: OK
>> test VIDIOC_G/S_PRIORITY: OK
>> test for unlimited opens: OK
>>
>> Debug ioctls:
>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>> test VIDIOC_LOG_STATUS: OK (Not Supported)
>>
>> Input ioctls:
>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
>> Inputs: 0 Audio Inputs: 0 Tuners: 0
>>
>> Output ioctls:
>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>> test VIDIOC_G/S/ENUMOUTPUT: OK
>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>> Outputs: 1 Audio Outputs: 0 Modulators: 0
>>
>> Input/Output configuration ioctls:
>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>> test VIDIOC_G/S_EDID: OK (Not Supported)
>>
>> Control ioctls (Output 0):
>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
>> test VIDIOC_QUERYCTRL: OK (Not Supported)
>> test VIDIOC_G/S_CTRL: OK (Not Supported)
>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>> Standard Controls: 0 Private Controls: 0
>>
>> Format ioctls (Output 0):
>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>> test VIDIOC_G/S_PARM: OK (Not Supported)
>> test VIDIOC_G_FBUF: OK (Not Supported)
>> test VIDIOC_G_FMT: OK
>> test VIDIOC_TRY_FMT: OK
>> test VIDIOC_S_FMT: OK
>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>> test Cropping: OK (Not Supported)
>> test Composing: OK (Not Supported)
>> test Scaling: OK (Not Supported)
>>
>> Codec ioctls (Output 0):
>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>
>> Buffer ioctls (Output 0):
>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>> test VIDIOC_EXPBUF: OK
>> test Requests: OK (Not Supported)
>>
>> Total for mgb4 device /dev/video2: 45, Succeeded: 45, Failed: 0, Warnings: 0
>>
>> Martin Tůma (2):
>> Added Digiteq Automotive MGB4 driver
>> Added Digiteq Automotive MGB4 driver documentation
>>
>> Documentation/admin-guide/media/mgb4.rst | 374 +++++++
>> .../admin-guide/media/pci-cardlist.rst | 1 +
>> .../admin-guide/media/v4l-drivers.rst | 1 +
>> MAINTAINERS | 7 +
>> drivers/media/pci/Kconfig | 1 +
>> drivers/media/pci/Makefile | 1 +
>> drivers/media/pci/mgb4/Kconfig | 17 +
>> drivers/media/pci/mgb4/Makefile | 6 +
>> drivers/media/pci/mgb4/mgb4_cmt.c | 244 +++++
>> drivers/media/pci/mgb4/mgb4_cmt.h | 17 +
>> drivers/media/pci/mgb4/mgb4_core.c | 686 +++++++++++++
>> drivers/media/pci/mgb4/mgb4_core.h | 74 ++
>> drivers/media/pci/mgb4/mgb4_dma.c | 123 +++
>> drivers/media/pci/mgb4/mgb4_dma.h | 18 +
>> drivers/media/pci/mgb4/mgb4_i2c.c | 140 +++
>> drivers/media/pci/mgb4/mgb4_i2c.h | 35 +
>> drivers/media/pci/mgb4/mgb4_io.h | 33 +
>> drivers/media/pci/mgb4/mgb4_regs.c | 30 +
>> drivers/media/pci/mgb4/mgb4_regs.h | 35 +
>> drivers/media/pci/mgb4/mgb4_sysfs.h | 18 +
>> drivers/media/pci/mgb4/mgb4_sysfs_in.c | 772 ++++++++++++++
>> drivers/media/pci/mgb4/mgb4_sysfs_out.c | 737 ++++++++++++++
>> drivers/media/pci/mgb4/mgb4_sysfs_pci.c | 71 ++
>> drivers/media/pci/mgb4/mgb4_trigger.c | 208 ++++
>> drivers/media/pci/mgb4/mgb4_trigger.h | 8 +
>> drivers/media/pci/mgb4/mgb4_vin.c | 939 ++++++++++++++++++
>> drivers/media/pci/mgb4/mgb4_vin.h | 69 ++
>> drivers/media/pci/mgb4/mgb4_vout.c | 602 +++++++++++
>> drivers/media/pci/mgb4/mgb4_vout.h | 65 ++
>> 29 files changed, 5332 insertions(+)
>> create mode 100644 Documentation/admin-guide/media/mgb4.rst
>> create mode 100644 drivers/media/pci/mgb4/Kconfig
>> create mode 100644 drivers/media/pci/mgb4/Makefile
>> create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_core.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_core.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_dma.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_dma.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_io.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_regs.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_regs.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_in.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_out.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_pci.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_vin.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_vin.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_vout.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_vout.h
>>
>>
>> base-commit: 27bbf45eae9ca98877a2d52a92a188147cd61b07
>