2002-02-23 22:42:43

by J.A. Magallon

Subject: [PATCHSET] Linux 2.4.18-rc4-jam1

Hi.

Version for rc4 is out (easy...):

http://giga.cps.unizar.es/~magallon/linux/kernel/2.4.18-rc4-jam1/

Aout reported floppy hangs: I have checked that it hangs even with
plain 2.4.17, and so have done other people, so I think it is not
an irqrate-A1 or sched-O1 problem.

Nobody uses floppy with 2.4.17 ?
Common patterns ?

Enjoy...

--
J.A. Magallon # Let the source be with you...
mailto:[email protected]
Mandrake Linux release 8.2 (Cooker) for i586
Linux werewolf 2.4.18-rc4-jam1 #1 SMP Sat Feb 23 16:25:56 CET 2002 i686

2002-02-23 23:16:56

by FD Cami

Subject: Re: [PATCHSET] Linux 2.4.18-rc4-jam1

J.A. Magallon wrote:
> Hi.
>
> Version for rc4 is out (easy...):
>
> http://giga.cps.unizar.es/~magallon/linux/kernel/2.4.18-rc4-jam1/
>
> Aout reported floppy hangs: I have checked that it hangs even with
> plain 2.4.17, and so have done other people, so I think it is not
> an irqrate-A1 or sched-O1 problem.
>
> Nobody uses floppy with 2.4.17 ?

stock 2.4.17 works here.
2.4.17-rmap12f-minilowlatency works here too.

i've verified this on 3 PCs :
1/ PIII933 on TUSL2-C (i815ep)
2/ PII350 on BXMaster (i440BX)
3/ Celeron 1.2GHz on TUSL2-C (i815ep)

dunno what is the problem...

Fran?ois

> Common patterns ?
>
> Enjoy...
>
>

2002-02-24 01:40:43

by Ed Sweetman

Subject: Re: [PATCHSET] Linux 2.4.18-rc4-jam1

I get this when trying to compile Linux 2.4.18-rc4-jam1 using debian
unstable. I'm positive i applied all of the patches in order. I'm
attaching my config

this is from compiling in ./fs using 2.95.4-11

buffer.c: In function `show_buffers':
buffer.c:2746: warning: int format, long int arg (arg 2)


namei.c:1625: parse error before `z'
namei.c:1626: syntax error before `int'
namei.c:1627: parse error before `*'
namei.c:1627: warning: type defaults to `int' in declaration of `from'
namei.c:1627: warning: data definition has no type or storage class
namei.c:1630: warning: type defaults to `int' in declaration of `from'
namei.c:1630: conflicting types for `from'
namei.c:1627: previous declaration of `from'
namei.c:1630: `oldname' undeclared here (not in a function)
namei.c:1630: warning: initialization makes integer from pointer without
a cast
namei.c:1630: initializer element is not constant
namei.c:1630: warning: data definition has no type or storage class
namei.c:1631: parse error before `if'
namei.c:1633: warning: type defaults to `int' in declaration of `to'
namei.c:1633: conflicting types for `to'
namei.c:1628: previous declaration of `to'
namei.c:1633: `newname' undeclared here (not in a function)
namei.c:1633: warning: initialization makes integer from pointer without
a cast
namei.c:1633: initializer element is not constant
namei.c:1633: warning: data definition has no type or storage class
namei.c:1634: warning: type defaults to `int' in declaration of `error'
namei.c:1634: warning: passing arg 1 of `PTR_ERR' makes pointer from
integer without a cast
namei.c:1634: initializer element is not constant
namei.c:1634: warning: data definition has no type or storage class
namei.c:1635: parse error before `if'
namei.c:1639: warning: type defaults to `int' in declaration of `error'
namei.c:1639: redefinition of `error'
namei.c:1634: `error' previously defined here
namei.c:1639: warning: data definition has no type or storage class
namei.c:1640: parse error before `if'
namei.c:1648: warning: type defaults to `int' in declaration of `error'
namei.c:1648: redefinition of `error'
namei.c:1639: `error' previously defined here
namei.c:1648: warning: data definition has no type or storage class
namei.c:1649: parse error before `if'
namei.c:1651: warning: type defaults to `int' in declaration of
`new_dentry'
namei.c:1651: warning: initialization makes integer from pointer without
a cast
namei.c:1651: initializer element is not constant
namei.c:1651: warning: data definition has no type or storage class
namei.c:1652: warning: type defaults to `int' in declaration of `error'
namei.c:1652: redefinition of `error'
namei.c:1648: `error' previously defined here
namei.c:1652: warning: passing arg 1 of `PTR_ERR' makes pointer from
integer without a cast
namei.c:1652: initializer element is not constant
namei.c:1652: warning: data definition has no type or storage class
namei.c:1653: parse error before `if'
namei.c:1655: warning: type defaults to `int' in declaration of `dput'
namei.c:1655: warning: parameter names (without types) in function
declaration
namei.c:1655: conflicting types for `dput'
/usr/src/linux/include/linux/dcache.h:267: previous declaration of
`dput'
namei.c:1655: warning: data definition has no type or storage class
namei.c:1656: parse error before `}'
namei.c:1657: parse error before `&'
namei.c:1657: warning: type defaults to `int' in declaration of `up'
namei.c:1657: warning: function declaration isn't a prototype
namei.c:1657: conflicting types for `up'
/usr/src/linux/include/asm/semaphore.h:207: previous declaration of `up'
namei.c:1657: warning: data definition has no type or storage class
namei.c:1658: parse error before `:'
namei.c:1665: parse error before `('
namei.c:1665: parse error before `)'
gcc: Internal compiler error: program cc1 got fatal signal 11
make[2]: *** [namei.o] Error 1
make[2]: Leaving directory `/usr/src/linux/fs'
make[1]: *** [first_rule] Error 2
make[1]: Leaving directory `/usr/src/linux/fs'
make: *** [_dir_fs] Error 2
cpp0: output pipe has been closed
psuedomode:/usr/src/linux# {standard input}: Assembler messages:
{standard input}:2356: Warning: end of file not at end of a line;
newline inserted
{standard input}:3725: Error: end of file inside conditional
{standard input}:3724: Error: here is the start of the unterminated
conditional

Attachments:

2002-02-24 01:51:09

by Ed Sweetman

Subject: Re: [PATCHSET] Linux 2.4.18-rc4-jam1

Sorry, this seems to happen with 2.4.17 too. Seems to be a debian
problem not kernel. Gah.

On Sat, 2002-02-23 at 20:39, Ed Sweetman wrote:
> I get this when trying to compile Linux 2.4.18-rc4-jam1 using debian
> unstable. I'm positive i applied all of the patches in order. I'm
> attaching my config
>
> this is from compiling in ./fs using 2.95.4-11
>
> buffer.c: In function `show_buffers':
> buffer.c:2746: warning: int format, long int arg (arg 2)
>
>
> namei.c:1625: parse error before `z'
> namei.c:1626: syntax error before `int'
> namei.c:1627: parse error before `*'
> namei.c:1627: warning: type defaults to `int' in declaration of `from'
> namei.c:1627: warning: data definition has no type or storage class
> namei.c:1630: warning: type defaults to `int' in declaration of `from'
> namei.c:1630: conflicting types for `from'
> namei.c:1627: previous declaration of `from'
> namei.c:1630: `oldname' undeclared here (not in a function)
> namei.c:1630: warning: initialization makes integer from pointer without
> a cast
> namei.c:1630: initializer element is not constant
> namei.c:1630: warning: data definition has no type or storage class
> namei.c:1631: parse error before `if'
> namei.c:1633: warning: type defaults to `int' in declaration of `to'
> namei.c:1633: conflicting types for `to'
> namei.c:1628: previous declaration of `to'
> namei.c:1633: `newname' undeclared here (not in a function)
> namei.c:1633: warning: initialization makes integer from pointer without
> a cast
> namei.c:1633: initializer element is not constant
> namei.c:1633: warning: data definition has no type or storage class
> namei.c:1634: warning: type defaults to `int' in declaration of `error'
> namei.c:1634: warning: passing arg 1 of `PTR_ERR' makes pointer from
> integer without a cast
> namei.c:1634: initializer element is not constant
> namei.c:1634: warning: data definition has no type or storage class
> namei.c:1635: parse error before `if'
> namei.c:1639: warning: type defaults to `int' in declaration of `error'
> namei.c:1639: redefinition of `error'
> namei.c:1634: `error' previously defined here
> namei.c:1639: warning: data definition has no type or storage class
> namei.c:1640: parse error before `if'
> namei.c:1648: warning: type defaults to `int' in declaration of `error'
> namei.c:1648: redefinition of `error'
> namei.c:1639: `error' previously defined here
> namei.c:1648: warning: data definition has no type or storage class
> namei.c:1649: parse error before `if'
> namei.c:1651: warning: type defaults to `int' in declaration of
> `new_dentry'
> namei.c:1651: warning: initialization makes integer from pointer without
> a cast
> namei.c:1651: initializer element is not constant
> namei.c:1651: warning: data definition has no type or storage class
> namei.c:1652: warning: type defaults to `int' in declaration of `error'
> namei.c:1652: redefinition of `error'
> namei.c:1648: `error' previously defined here
> namei.c:1652: warning: passing arg 1 of `PTR_ERR' makes pointer from
> integer without a cast
> namei.c:1652: initializer element is not constant
> namei.c:1652: warning: data definition has no type or storage class
> namei.c:1653: parse error before `if'
> namei.c:1655: warning: type defaults to `int' in declaration of `dput'
> namei.c:1655: warning: parameter names (without types) in function
> declaration
> namei.c:1655: conflicting types for `dput'
> /usr/src/linux/include/linux/dcache.h:267: previous declaration of
> `dput'
> namei.c:1655: warning: data definition has no type or storage class
> namei.c:1656: parse error before `}'
> namei.c:1657: parse error before `&'
> namei.c:1657: warning: type defaults to `int' in declaration of `up'
> namei.c:1657: warning: function declaration isn't a prototype
> namei.c:1657: conflicting types for `up'
> /usr/src/linux/include/asm/semaphore.h:207: previous declaration of `up'
> namei.c:1657: warning: data definition has no type or storage class
> namei.c:1658: parse error before `:'
> namei.c:1665: parse error before `('
> namei.c:1665: parse error before `)'
> gcc: Internal compiler error: program cc1 got fatal signal 11
> make[2]: *** [namei.o] Error 1
> make[2]: Leaving directory `/usr/src/linux/fs'
> make[1]: *** [first_rule] Error 2
> make[1]: Leaving directory `/usr/src/linux/fs'
> make: *** [_dir_fs] Error 2
> cpp0: output pipe has been closed
> psuedomode:/usr/src/linux# {standard input}: Assembler messages:
> {standard input}:2356: Warning: end of file not at end of a line;
> newline inserted
> {standard input}:3725: Error: end of file inside conditional
> {standard input}:3724: Error: here is the start of the unterminated
> conditional
>
> ----
>

> #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86=y
> CONFIG_ISA=y
> # CONFIG_SBUS is not set
> CONFIG_UID16=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> # CONFIG_MODVERSIONS is not set
> CONFIG_KMOD=y
>
> #
> # Processor type and features
> #
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> CONFIG_MK7=y
> # CONFIG_MELAN is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MCYRIXIII is not set
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_X86_TSC=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_USE_3DNOW=y
> CONFIG_X86_PGE=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> # CONFIG_MICROCODE is not set
> # CONFIG_X86_MSR is not set
> # CONFIG_X86_CPUID is not set
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> # CONFIG_SMP is not set
> CONFIG_X86_UP_APIC=y
> CONFIG_X86_UP_IOAPIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
>
> #
> # General setup
> #
> CONFIG_NET=y
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_NAMES=y
> # CONFIG_EISA is not set
> # CONFIG_MCA is not set
> # CONFIG_HOTPLUG is not set
> # CONFIG_PCMCIA is not set
> # CONFIG_HOTPLUG_PCI is not set
> CONFIG_SYSVIPC=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> # CONFIG_BPROC is not set
> CONFIG_SYSCTL=y
> CONFIG_KCORE_ELF=y
> # CONFIG_KCORE_AOUT is not set
> CONFIG_BINFMT_AOUT=y
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=y
> CONFIG_PM=y
> CONFIG_ACPI=y
> CONFIG_ACPI_DEBUG=y
> CONFIG_ACPI_BUSMGR=y
> CONFIG_ACPI_SYS=y
> CONFIG_ACPI_CPU=y
> # CONFIG_ACPI_BUTTON is not set
> # CONFIG_ACPI_AC is not set
> # CONFIG_ACPI_EC is not set
> # CONFIG_APM is not set
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
>
> #
> # Plug and Play configuration
> #
> # CONFIG_PNP is not set
>
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> CONFIG_BLK_DEV_LOOP=m
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_RAM is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> # CONFIG_NETLINK_DEV is not set
> # CONFIG_NETFILTER is not set
> # CONFIG_FILTER is not set
> CONFIG_UNIX=y
> CONFIG_INET=y
> # CONFIG_IP_MULTICAST is not set
> # CONFIG_IP_ADVANCED_ROUTER is not set
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_ARPD is not set
> CONFIG_INET_ECN=y
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_IPV6 is not set
> # CONFIG_KHTTPD is not set
> # CONFIG_ATM is not set
> # CONFIG_VLAN_8021Q is not set
>
> #
> #
> #
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_LLC is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
>
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # ATA/IDE/MFM/RLL support
> #
> CONFIG_IDE=y
>
> #
> # IDE, ATA and ATAPI Block devices
> #
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> # CONFIG_BLK_DEV_HD is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> # CONFIG_IDEDISK_STROKE is not set
> # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
> # CONFIG_BLK_DEV_COMMERIAL is not set
> CONFIG_BLK_DEV_IDECD=m
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> CONFIG_BLK_DEV_IDESCSI=m
>
> #
> # IDE chipset support/bugfixes
> #
> # CONFIG_BLK_DEV_CMD640 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> CONFIG_BLK_DEV_IDEDMA=y
> CONFIG_IDEDMA_PCI_WIP=y
> # CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set
> CONFIG_IDEDMA_NEW_DRIVE_LISTINGS=y
> CONFIG_BLK_DEV_ADMA=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_PIIX is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_PDC_ADMA is not set
> CONFIG_BLK_DEV_PDC202XX=y
> # CONFIG_PDC202XX_BURST is not set
> # CONFIG_PDC202XX_FORCE is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> CONFIG_BLK_DEV_VIA82CXXX=y
> # CONFIG_IDE_CHIPSETS is not set
> # CONFIG_BLK_DEV_ELEVATOR_NOOP is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_IDEDMA_IVB is not set
> # CONFIG_DMA_NONPCI is not set
> CONFIG_BLK_DEV_IDE_MODES=y
> # CONFIG_BLK_DEV_ATARAID is not set
>
> #
> # SCSI support
> #
> CONFIG_SCSI=m
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> # CONFIG_BLK_DEV_SD is not set
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> # CONFIG_BLK_DEV_SR is not set
> CONFIG_CHR_DEV_SG=m
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> CONFIG_SCSI_DEBUG_QUEUES=y
> CONFIG_SCSI_MULTI_LUN=y
> CONFIG_SCSI_CONSTANTS=y
> # CONFIG_SCSI_LOGGING is not set
>
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_7000FASST is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AHA152X is not set
> # CONFIG_SCSI_AHA1542 is not set
> # CONFIG_SCSI_AHA1740 is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_DPT_I2O is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_IN2000 is not set
> # CONFIG_SCSI_AM53C974 is not set
> # CONFIG_SCSI_MEGARAID is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_DTC3280 is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_EATA_DMA is not set
> # CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_GENERIC_NCR5380 is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_NCR53C406A is not set
> # CONFIG_SCSI_NCR53C7xx is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_NCR53C8XX is not set
> # CONFIG_SCSI_SYM53C8XX is not set
> # CONFIG_SCSI_PAS16 is not set
> # CONFIG_SCSI_PCI2000 is not set
> # CONFIG_SCSI_PCI2220I is not set
> # CONFIG_SCSI_PSI240I is not set
> # CONFIG_SCSI_QLOGIC_FAS is not set
> # CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_SEAGATE is not set
> # CONFIG_SCSI_SIM710 is not set
> # CONFIG_SCSI_SYM53C416 is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_T128 is not set
> # CONFIG_SCSI_U14_34F is not set
> # CONFIG_SCSI_ULTRASTOR is not set
> # CONFIG_SCSI_DEBUG is not set
>
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION_BOOT is not set
> # CONFIG_FUSION_ISENSE is not set
> # CONFIG_FUSION_CTL is not set
> # CONFIG_FUSION_LAN is not set
>
> #
> # IEEE 1394 (FireWire) support (EXPERIMENTAL)
> #
> # CONFIG_IEEE1394 is not set
>
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> CONFIG_DUMMY=m
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_ETHERTAP is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_NET_VENDOR_3COM is not set
> # CONFIG_LANCE is not set
> # CONFIG_NET_VENDOR_SMC is not set
> # CONFIG_NET_VENDOR_RACAL is not set
> # CONFIG_AT1700 is not set
> # CONFIG_DEPCA is not set
> # CONFIG_HP100 is not set
> # CONFIG_NET_ISA is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_AC3200 is not set
> # CONFIG_APRICOT is not set
> # CONFIG_CS89x0 is not set
> CONFIG_TULIP=m
> CONFIG_TULIP_MWI=y
> CONFIG_TULIP_MMIO=y
> # CONFIG_DE4X5 is not set
> # CONFIG_DGRS is not set
> # CONFIG_DM9102 is not set
> # CONFIG_EEPRO100 is not set
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139CP is not set
> CONFIG_8139TOO=m
> # CONFIG_8139TOO_PIO is not set
> # CONFIG_8139TOO_TUNE_TWISTER is not set
> # CONFIG_8139TOO_8129 is not set
> CONFIG_8139_NEW_RX_RESET=y
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_TLAN is not set
> # CONFIG_VIA_RHINE is not set
> # CONFIG_WINBOND_840 is not set
> # CONFIG_NET_POCKET is not set
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
>
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> # CONFIG_NET_FC is not set
> # CONFIG_RCPCI is not set
> # CONFIG_SHAPER is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
>
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
>
> #
> # IrDA (infrared) support
> #
> # CONFIG_IRDA is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
>
> #
> # Old CD-ROM drivers (not SCSI, not IDE)
> #
> # CONFIG_CD_NO_IDESCSI is not set
>
> #
> # Input core support
> #
> # CONFIG_INPUT is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_SERIAL=y
> # CONFIG_SERIAL_CONSOLE is not set
> # CONFIG_SERIAL_ACPI is not set
> # CONFIG_SERIAL_EXTENDED is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
>
> #
> # I2C support
> #
> CONFIG_I2C=m
> CONFIG_I2C_ALGOBIT=m
> # CONFIG_I2C_BITELV is not set
> # CONFIG_I2C_BITVELLE is not set
> CONFIG_I2C_ALGOPCF=m
> # CONFIG_I2C_PCFISA is not set
> CONFIG_I2C_MAINBOARD=y
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_HYDRA is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_TSUNAMI is not set
> # CONFIG_I2C_I801 is not set
> # CONFIG_I2C_I810 is not set
> # CONFIG_I2C_PIIX4 is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_VIA is not set
> CONFIG_I2C_VIAPRO=m
> # CONFIG_I2C_VOODOO3 is not set
> CONFIG_I2C_ISA=m
> CONFIG_I2C_CHARDEV=m
> CONFIG_I2C_PROC=m
>
> #
> # Hardware sensors support
> #
> CONFIG_SENSORS=y
> # CONFIG_SENSORS_ADM1021 is not set
> # CONFIG_SENSORS_ADM1024 is not set
> # CONFIG_SENSORS_ADM1025 is not set
> # CONFIG_SENSORS_ADM9240 is not set
> # CONFIG_SENSORS_DS1621 is not set
> # CONFIG_SENSORS_FSCPOS is not set
> # CONFIG_SENSORS_FSCSCY is not set
> # CONFIG_SENSORS_GL518SM is not set
> # CONFIG_SENSORS_GL520SM is not set
> # CONFIG_SENSORS_MAXILIFE is not set
> # CONFIG_SENSORS_IT87 is not set
> # CONFIG_SENSORS_MTP008 is not set
> # CONFIG_SENSORS_LM75 is not set
> # CONFIG_SENSORS_LM78 is not set
> # CONFIG_SENSORS_LM80 is not set
> # CONFIG_SENSORS_LM87 is not set
> # CONFIG_SENSORS_SIS5595 is not set
> # CONFIG_SENSORS_THMC50 is not set
> CONFIG_SENSORS_VIA686A=m
> # CONFIG_SENSORS_W83781D is not set
> # CONFIG_SENSORS_OTHER is not set
>
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> CONFIG_MOUSE=y
> CONFIG_PSMOUSE=y
> # CONFIG_82C710_MOUSE is not set
> # CONFIG_PC110_PAD is not set
>
> #
> # Joysticks
> #
> # CONFIG_INPUT_GAMEPORT is not set
>
> #
> # Input core support is needed for gameports
> #
>
> #
> # Input core support is needed for joysticks
> #
> # CONFIG_QIC02_TAPE is not set
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_INTEL_RNG is not set
> # CONFIG_NVRAM is not set
> CONFIG_RTC=y
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> CONFIG_AGP=y
> # CONFIG_AGP_INTEL is not set
> # CONFIG_AGP_I810 is not set
> CONFIG_AGP_VIA=y
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_SWORKS is not set
> CONFIG_DRM=y
> # CONFIG_DRM_OLD is not set
>
> #
> # DRM 4.1 drivers
> #
> CONFIG_DRM_NEW=y
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_RADEON is not set
> # CONFIG_DRM_I810 is not set
> CONFIG_DRM_MGA=m
> # CONFIG_DRM_SIS is not set
> # CONFIG_MWAVE is not set
>
> #
> # Multimedia devices
> #
> CONFIG_VIDEO_DEV=m
>
> #
> # Video For Linux
> #
> CONFIG_VIDEO_PROC_FS=y
>
> #
> # Video Adapters
> #
> CONFIG_VIDEO_BT848=m
> # CONFIG_VIDEO_PMS is not set
> # CONFIG_VIDEO_CPIA is not set
> # CONFIG_VIDEO_SAA5249 is not set
> # CONFIG_TUNER_3036 is not set
> # CONFIG_VIDEO_STRADIS is not set
> # CONFIG_VIDEO_ZORAN is not set
> # CONFIG_VIDEO_ZR36120 is not set
>
> #
> # Radio Adapters
> #
> # CONFIG_RADIO_CADET is not set
> # CONFIG_RADIO_RTRACK is not set
> # CONFIG_RADIO_RTRACK2 is not set
> # CONFIG_RADIO_AZTECH is not set
> # CONFIG_RADIO_GEMTEK is not set
> # CONFIG_RADIO_GEMTEK_PCI is not set
> # CONFIG_RADIO_MAXIRADIO is not set
> # CONFIG_RADIO_MAESTRO is not set
> # CONFIG_RADIO_SF16FMI is not set
> # CONFIG_RADIO_TERRATEC is not set
> # CONFIG_RADIO_TRUST is not set
> # CONFIG_RADIO_TYPHOON is not set
> # CONFIG_RADIO_ZOLTRIX is not set
>
> #
> # File systems
> #
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> # CONFIG_AUTOFS4_FS is not set
> # CONFIG_REISERFS_FS is not set
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BFS_FS is not set
> CONFIG_EXT3_FS=y
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FAT_FS=m
> CONFIG_MSDOS_FS=m
> # CONFIG_UMSDOS_FS is not set
> CONFIG_VFAT_FS=m
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_TMPFS is not set
> # CONFIG_RAMFS is not set
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> # CONFIG_ZISOFS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_NTFS_FS is not set
> # CONFIG_HPFS_FS is not set
> CONFIG_PROC_FS=y
> # CONFIG_DEVFS_FS is not set
> CONFIG_DEVPTS_FS=y
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_EXT2_FS=m
> # CONFIG_SYSV_FS is not set
> # CONFIG_UDF_FS is not set
> # CONFIG_UFS_FS is not set
>
> #
> # Network File Systems
> #
> # CONFIG_CODA_FS is not set
> # CONFIG_INTERMEZZO_FS is not set
> # CONFIG_NFS_FS is not set
> # CONFIG_NFSD is not set
> # CONFIG_SUNRPC is not set
> # CONFIG_LOCKD is not set
> CONFIG_SMB_FS=m
> # CONFIG_SMB_NLS_DEFAULT is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_ZISOFS_FS is not set
> # CONFIG_ZLIB_FS_INFLATE is not set
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_SMB_NLS=y
> CONFIG_NLS=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=m
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ISO8859_1=m
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> # CONFIG_NLS_UTF8 is not set
>
> #
> # Console drivers
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_VIDEO_SELECT is not set
> # CONFIG_MDA_CONSOLE is not set
>
> #
> # Frame-buffer support
> #
> # CONFIG_FB is not set
>
> #
> # Sound
> #
> CONFIG_SOUND=m
> # CONFIG_SOUND_BT878 is not set
> # CONFIG_SOUND_CMPCI is not set
> # CONFIG_SOUND_EMU10K1 is not set
> # CONFIG_SOUND_FUSION is not set
> # CONFIG_SOUND_CS4281 is not set
> # CONFIG_SOUND_ES1370 is not set
> # CONFIG_SOUND_ES1371 is not set
> # CONFIG_SOUND_ESSSOLO1 is not set
> # CONFIG_SOUND_MAESTRO is not set
> # CONFIG_SOUND_MAESTRO3 is not set
> # CONFIG_SOUND_ICH is not set
> # CONFIG_SOUND_RME96XX is not set
> # CONFIG_SOUND_SONICVIBES is not set
> # CONFIG_SOUND_TRIDENT is not set
> # CONFIG_SOUND_MSNDCLAS is not set
> # CONFIG_SOUND_MSNDPIN is not set
> # CONFIG_SOUND_VIA82CXXX is not set
> # CONFIG_SOUND_OSS is not set
> # CONFIG_SOUND_TVMIXER is not set
>
> #
> # USB support
> #
> # CONFIG_USB is not set
>
> #
> # USB Controllers
> #
>
> #
> # USB Device Class drivers
> #
>
> #
> # USB Human Interface Devices (HID)
> #
>
> #
> # Input core support is needed for USB HID
> #
>
> #
> # USB Imaging devices
> #
>
> #
> # USB Multimedia devices
> #
>
> #
> # USB Network adaptors
> #
>
> #
> # USB port drivers
> #
>
> #
> # USB Serial Converter support
> #
>
> #
> # USB Miscellaneous drivers
> #
>
> #
> # Bluetooth support
> #
> # CONFIG_BLUEZ is not set
>
> #
> # Kernel hacking
> #
> # CONFIG_DEBUG_KERNEL is not set

2002-02-24 02:01:50

by Ed Sweetman

Subject: Re: [PATCHSET] Linux 2.4.18-rc4-jam1

Or it could be my ext3 fs corrupting files again.

2002-02-24 03:06:16

by Mike Fedyk

Subject: Re: [PATCHSET] Linux 2.4.18-rc4-jam1

On Sat, Feb 23, 2002 at 09:01:06PM -0500, Ed Sweetman wrote:
> Or it could be my ext3 fs corrupting files again.
>

Oy, do you have one of those write-back (behind) ide hard drives?

2002-02-24 04:58:19

by Ed Sweetman

Subject: Re: [PATCHSET] Linux 2.4.18-rc4-jam1

On Sat, 2002-02-23 at 22:06, Mike Fedyk wrote:
> On Sat, Feb 23, 2002 at 09:01:06PM -0500, Ed Sweetman wrote:
> > Or it could be my ext3 fs corrupting files again.
> >
>
> Oy, do you have one of those write-back (behind) ide hard drives?
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

Probably, it's a WD 100GB. hdparm says WriteCache=enabled
I dont know if the bios is set to writeback off hand, I'd have to
reboot, which I'll probably do soon to add in another hdd and possibly
run memtest86 instead of just memtest

2002-02-24 05:22:46

by D. M. Monarres

Subject: Re: [PATCHSET] Linux 2.4.18-rc4-jam1

I've got it compiled on debian unstable. (updated about two days ago)
Attached is my .config.
--
D. M. Monarres <[email protected]>

"You can't teach people to be lazy - either they have it, or they
don't."
-- Dagwood Bumstead

-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GM/CS/ED/P d- s+: a-- C++ UL P+ L+++ E- W++ N+ o? K- w--- O?
M>+ V? PS+ PE Y+ PGP t- 5? X? R tv b++++ DI- D+ G e+ h-- r++
y+++
------END GEEK CODE BLOCK------

Attachments:

2002-02-25 15:54:41

by Mike Fedyk

Subject: Re: [PATCHSET] Linux 2.4.18-rc4-jam1

On Sat, Feb 23, 2002 at 11:57:51PM -0500, Ed Sweetman wrote:
> On Sat, 2002-02-23 at 22:06, Mike Fedyk wrote:
> > On Sat, Feb 23, 2002 at 09:01:06PM -0500, Ed Sweetman wrote:
> > > Or it could be my ext3 fs corrupting files again.
> > >
> >
> > Oy, do you have one of those write-back (behind) ide hard drives?

> Probably, it's a WD 100GB. hdparm says WriteCache=enabled
> I dont know if the bios is set to writeback off hand, I'd have to
> reboot, which I'll probably do soon to add in another hdd and possibly
> run memtest86 instead of just memtest

Does it turn off automatically on shutdown (halt)?

Debian has recently turned off write-back caching on shutdown just after
unmounting all local filesystems. That, or turning off write-back caching
will probably fix your problem.

Mike