2002-03-22 17:04:20

by Steven Cole

[permalink] [raw]
Subject: [PATCH] 2.5.7-dj1, add 4 help texts to drivers/s390/Config.help

This patch adds four help texts to drivers/s390/Config.help.
The texts were obtained from ESR's v2.97 Configure.help.

Steven

--- linux-2.5.7-dj1/drivers/s390/Config.help.orig Fri Mar 22 09:43:48 2002
+++ linux-2.5.7-dj1/drivers/s390/Config.help Fri Mar 22 09:54:14 2002
@@ -321,6 +321,18 @@
CONFIG_DASD_FBA
FBA devices are currently unsupported.

+CONFIG_DASD_AUTO_DIAG
+ Enable this option if you want your DIAG discipline module loaded
+ on DASD driver startup.
+
+CONFIG_DASD_AUTO_ECKD
+ Enable this option if you want your ECKD discipline module loaded
+ on DASD driver startup.
+
+CONFIG_DASD_AUTO_FBA
+ Enable this option if you want your FBA discipline module loaded
+ on DASD driver startup.
+
CONFIG_TN3215
Include support for IBM 3215 line-mode terminals.

@@ -342,6 +354,15 @@
CONFIG_HWC_CONSOLE
Include support for using an IBM HWC line-mode terminal as the Linux
system console.
+
+CONFIG_HWC_CPI
+ This option enables the hardware console interface for system
+ identification This is commonly used for workload management and
+ gives you a nice name for the system on the service element.
+ Please select this option as a module since built-in operation is
+ completely untested.
+ You should only select this option if you know what you are doing,
+ need this feature and intend to run your kernel in LPAR.

CONFIG_S390_TAPE
Select this option if you want to access channel-attached tape