The following patch contains the help sections for
the SyncLink MP/CS drivers added to 2.4.20-pre5.
--- linux-2.4.20-pre5/Documentation/Configure.help Thu Aug 29 13:32:18 2002
+++ linux-2.4.20-pre5-mg/Documentation/Configure.help Thu Aug 29 14:40:19 2002
@@ -3411,6 +3411,16 @@
a module, say M here and read <file:Documentation/modules.txt>.
If unsure, say N.
+CONFIG_SYNCLINK_CS
+ Enable support for the SyncLink PC Card serial adapter, running
+ asynchronous and HDLC communications up to 512Kbps. The port is
+ selectable for RS-232, V.35, RS-449, RS-530, and X.21
+
+ This driver may be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclink_cs.o. If you want to do that, say M
+ here.
+
ACP Modem (Mwave) support
CONFIG_MWAVE
The ACP modem (Mwave) for Linux is a WinModem. It is composed of a
@@ -16874,6 +16884,17 @@
This driver can only be built as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called synclink.o. If you want to do that, say M
+ here.
+
+CONFIG_SYNCLINKMP
+ Enable support for the SyncLink Multiport (2 or 4 ports)
+ serial adapter, running asynchronous and HDLC communications up
+ to 2.048Mbps. Each ports is independently selectable for
+ RS-232, V.35, RS-449, RS-530, and X.21
+
+ This driver may be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclinkmp.o. If you want to do that, say M
here.
Synchronous HDLC line discipline support