This patch provides the following spelling fix.
accessable -> accessible
drivers/isdn/hardware/eicon/io.c | 2 +-
drivers/net/au1000_eth.c | 2 +-
drivers/net/dgrs_plx9060.h | 2 +-
drivers/net/sis900.c | 2 +-
drivers/net/sk98lin/skge.c | 2 +-
drivers/net/sk98lin/skgeinit.c | 4 ++--
drivers/net/skfp/pmf.c | 4 ++--
drivers/s390/cio/chsc.c | 2 +-
drivers/scsi/aic7xxx/aic79xx_osm.c | 2 +-
drivers/scsi/aic7xxx/aic7xxx_osm.c | 2 +-
drivers/scsi/psi_chip.h | 2 +-
include/asm-arm/arch-integrator/platform.h | 2 +-
include/asm-ia64/sn/pci/bridge.h | 4 ++--
include/asm-ia64/sn/sn2/shub_md.h | 2 +-
include/asm-parisc/pgtable.h | 2 +-
15 files changed, 18 insertions(+), 18 deletions(-)
diff -ur linux-2.5.62-1104-orig/drivers/isdn/hardware/eicon/io.c linux-2.5.62-1104/drivers/isdn/hardware/eicon/io.c
--- linux-2.5.62-1104-orig/drivers/isdn/hardware/eicon/io.c Thu Jan 16 19:21:47 2003
+++ linux-2.5.62-1104/drivers/isdn/hardware/eicon/io.c Tue Feb 18 18:12:35 2003
@@ -534,7 +534,7 @@
goto Trapped ;
}
/*
- * memory based shared ram is accessable from different
+ * memory based shared ram is accessible from different
* processors without disturbing concurrent processes.
*/
a->ram_out (a, &IoAdapter->pcm->rc, 0) ;
diff -ur linux-2.5.62-1104-orig/drivers/net/au1000_eth.c linux-2.5.62-1104/drivers/net/au1000_eth.c
--- linux-2.5.62-1104-orig/drivers/net/au1000_eth.c Thu Jan 16 19:22:14 2003
+++ linux-2.5.62-1104/drivers/net/au1000_eth.c Tue Feb 18 18:12:35 2003
@@ -465,7 +465,7 @@
mii_status = mdio_read(dev, phy_addr, MII_STATUS);
if (mii_status == 0xffff || mii_status == 0x0000)
- /* the mii is not accessable, try next one */
+ /* the mii is not accessible, try next one */
continue;
phy_id0 = mdio_read(dev, phy_addr, MII_PHY_ID0);
diff -ur linux-2.5.62-1104-orig/drivers/net/dgrs_plx9060.h linux-2.5.62-1104/drivers/net/dgrs_plx9060.h
--- linux-2.5.62-1104-orig/drivers/net/dgrs_plx9060.h Thu Jan 16 19:22:07 2003
+++ linux-2.5.62-1104/drivers/net/dgrs_plx9060.h Tue Feb 18 18:12:35 2003
@@ -18,7 +18,7 @@
#define PCI_INT_LINE 0x3C
/*
- * Registers accessable directly from PCI and local side.
+ * Registers accessible directly from PCI and local side.
* Offset is from PCI side. Add PLX_LCL_OFFSET for local address.
*/
#define PLX_LCL_OFFSET 0x80 /* Offset of regs from local side */
diff -ur linux-2.5.62-1104-orig/drivers/net/sis900.c linux-2.5.62-1104/drivers/net/sis900.c
--- linux-2.5.62-1104-orig/drivers/net/sis900.c Fri Feb 14 20:11:58 2003
+++ linux-2.5.62-1104/drivers/net/sis900.c Tue Feb 18 18:12:35 2003
@@ -526,7 +526,7 @@
mii_status = mdio_read(net_dev, phy_addr, MII_STATUS);
if (mii_status == 0xffff || mii_status == 0x0000)
- /* the mii is not accessable, try next one */
+ /* the mii is not accessible, try next one */
continue;
if ((mii_phy = kmalloc(sizeof(struct mii_phy), GFP_KERNEL)) == NULL) {
diff -ur linux-2.5.62-1104-orig/drivers/net/sk98lin/skge.c linux-2.5.62-1104/drivers/net/sk98lin/skge.c
--- linux-2.5.62-1104-orig/drivers/net/sk98lin/skge.c Thu Jan 16 19:21:40 2003
+++ linux-2.5.62-1104/drivers/net/sk98lin/skge.c Tue Feb 18 18:12:35 2003
@@ -2516,7 +2516,7 @@
/*
* Do not set the Limit to 0, because this could cause
* wrap around with ReQueue'ed buffers (a buffer could
- * be requeued in the same position, made accessable to
+ * be requeued in the same position, made accessible to
* the hardware, and the hardware could change its
* contents!
*/
diff -ur linux-2.5.62-1104-orig/drivers/net/sk98lin/skgeinit.c linux-2.5.62-1104/drivers/net/sk98lin/skgeinit.c
--- linux-2.5.62-1104-orig/drivers/net/sk98lin/skgeinit.c Mon Feb 10 12:23:00 2003
+++ linux-2.5.62-1104/drivers/net/sk98lin/skgeinit.c Tue Feb 18 18:12:35 2003
@@ -1781,7 +1781,7 @@
* Returns:
* 0: success
* 1: Number of MACs exceeds SK_MAX_MACS ( after level 1)
- * 2: Adapter not present or not accessable
+ * 2: Adapter not present or not accessible
* 3: Illegal initialization level
* 4: Initialization Level 1 Call missing
* 5: Unexpected PHY type detected
@@ -1808,7 +1808,7 @@
/* Initialization Level 1 */
RetVal = SkGeInit1(pAC, IoC);
- /* Check if the adapter seems to be accessable */
+ /* Check if the adapter seems to be accessible */
SK_OUT32(IoC, B2_IRQM_INI, 0x11335577L);
SK_IN32(IoC, B2_IRQM_INI, &DWord);
SK_OUT32(IoC, B2_IRQM_INI, 0x00000000L);
diff -ur linux-2.5.62-1104-orig/drivers/net/skfp/pmf.c linux-2.5.62-1104/drivers/net/skfp/pmf.c
--- linux-2.5.62-1104-orig/drivers/net/skfp/pmf.c Thu Jan 16 19:22:47 2003
+++ linux-2.5.62-1104/drivers/net/skfp/pmf.c Tue Feb 18 18:12:35 2003
@@ -122,7 +122,7 @@
/*
* PRIVATE EXTENSIONS
- * only accessable locally to get/set passwd
+ * only accessible locally to get/set passwd
*/
{ SMT_P10F0,AC_GR, MOFFSA(fddiPRPMFPasswd), "8" } ,
{ SMT_P10F1,AC_GR, MOFFSS(fddiPRPMFStation), "8" } ,
@@ -211,7 +211,7 @@
/*
* PRIVATE EXTENSIONS
- * only accessable locally to get/set TMIN
+ * only accessible locally to get/set TMIN
*/
{ SMT_P20F0,AC_NA } ,
{ SMT_P20F1,AC_GR, MOFFMS(fddiMACT_Min), "lT" } ,
diff -ur linux-2.5.62-1104-orig/drivers/s390/cio/chsc.c linux-2.5.62-1104/drivers/s390/cio/chsc.c
--- linux-2.5.62-1104-orig/drivers/s390/cio/chsc.c Thu Jan 16 19:22:16 2003
+++ linux-2.5.62-1104/drivers/s390/cio/chsc.c Tue Feb 18 18:12:35 2003
@@ -486,7 +486,7 @@
case 2: /* i/o resource accessibiliy */
CIO_CRW_EVENT(4, "chsc_process_crw: "
"channel subsystem reports some I/O "
- "devices may have become accessable\n");
+ "devices may have become accessible\n");
pr_debug( KERN_DEBUG "Data received after sei: \n");
pr_debug( KERN_DEBUG "Validity flags: %x\n", sei_res->vf);
diff -ur linux-2.5.62-1104-orig/drivers/scsi/aic7xxx/aic79xx_osm.c linux-2.5.62-1104/drivers/scsi/aic7xxx/aic79xx_osm.c
--- linux-2.5.62-1104-orig/drivers/scsi/aic7xxx/aic79xx_osm.c Tue Feb 18 18:06:18 2003
+++ linux-2.5.62-1104/drivers/scsi/aic7xxx/aic79xx_osm.c Tue Feb 18 18:12:35 2003
@@ -1826,7 +1826,7 @@
* At least in 2.2.14, malloc is a slab allocator so all
* allocations are aligned. We assume for these kernel versions
* that all allocations will be bellow 4Gig, physically contiguous,
- * and accessable via DMA by the controller.
+ * and accessible via DMA by the controller.
*/
map = NULL; /* No additional information to store */
*vaddr = malloc(dmat->maxsize, M_DEVBUF, M_NOWAIT);
diff -ur linux-2.5.62-1104-orig/drivers/scsi/aic7xxx/aic7xxx_osm.c linux-2.5.62-1104/drivers/scsi/aic7xxx/aic7xxx_osm.c
--- linux-2.5.62-1104-orig/drivers/scsi/aic7xxx/aic7xxx_osm.c Tue Feb 18 18:06:18 2003
+++ linux-2.5.62-1104/drivers/scsi/aic7xxx/aic7xxx_osm.c Tue Feb 18 18:12:35 2003
@@ -1435,7 +1435,7 @@
* At least in 2.2.14, malloc is a slab allocator so all
* allocations are aligned. We assume for these kernel versions
* that all allocations will be bellow 4Gig, physically contiguous,
- * and accessable via DMA by the controller.
+ * and accessible via DMA by the controller.
*/
map = NULL; /* No additional information to store */
*vaddr = malloc(dmat->maxsize, M_DEVBUF, M_NOWAIT);
diff -ur linux-2.5.62-1104-orig/drivers/scsi/psi_chip.h linux-2.5.62-1104/drivers/scsi/psi_chip.h
--- linux-2.5.62-1104-orig/drivers/scsi/psi_chip.h Thu Jan 16 19:21:38 2003
+++ linux-2.5.62-1104/drivers/scsi/psi_chip.h Tue Feb 18 18:12:35 2003
@@ -108,7 +108,7 @@
typedef struct
{
UCHAR irq; // interrupt request channel number
- UCHAR numDrives; // Number of accessable drives
+ UCHAR numDrives; // Number of accessible drives
UCHAR fastFormat; // Boolean for fast format enable
} CHIP_CONFIG_N;
diff -ur linux-2.5.62-1104-orig/include/asm-arm/arch-integrator/platform.h linux-2.5.62-1104/include/asm-arm/arch-integrator/platform.h
--- linux-2.5.62-1104-orig/include/asm-arm/arch-integrator/platform.h Thu Jan 16 19:22:14 2003
+++ linux-2.5.62-1104/include/asm-arm/arch-integrator/platform.h Tue Feb 18 18:12:35 2003
@@ -466,7 +466,7 @@
#define MAXSWINUM 31
/* ------------------------------------------------------------------------
- * LED's - The header LED is not accessable via the uHAL API
+ * LED's - The header LED is not accessible via the uHAL API
* ------------------------------------------------------------------------
*
*/
diff -ur linux-2.5.62-1104-orig/include/asm-ia64/sn/pci/bridge.h linux-2.5.62-1104/include/asm-ia64/sn/pci/bridge.h
--- linux-2.5.62-1104-orig/include/asm-ia64/sn/pci/bridge.h Thu Jan 16 19:21:43 2003
+++ linux-2.5.62-1104/include/asm-ia64/sn/pci/bridge.h Tue Feb 18 18:12:35 2003
@@ -186,8 +186,8 @@
/*
* BRIDGE, XBRIDGE, PIC register definitions. NOTE: Prior to PIC, registers
- * were a 32bit quantity and double word aligned (and only accessable as a
- * 32bit word. PIC registers are 64bits and accessable as words or double
+ * were a 32bit quantity and double word aligned (and only accessible as a
+ * 32bit word. PIC registers are 64bits and accessible as words or double
* words. PIC registers that have valid bits (ie. not just reserved) in the
* upper 32bits are defined as a union of one 64bit picreg_t and two 32bit
* bridgereg_t so we can access them both ways.
diff -ur linux-2.5.62-1104-orig/include/asm-ia64/sn/sn2/shub_md.h linux-2.5.62-1104/include/asm-ia64/sn/sn2/shub_md.h
--- linux-2.5.62-1104-orig/include/asm-ia64/sn/sn2/shub_md.h Thu Jan 16 19:22:45 2003
+++ linux-2.5.62-1104/include/asm-ia64/sn/sn2/shub_md.h Tue Feb 18 18:12:35 2003
@@ -133,7 +133,7 @@
#define MD_DIMM_SIZE_MBYTES(_size, _2bk) ( \
( (_size) == 7 ? 0 : ( 0x40L << (_size) ) << (_2bk))) \
-/* The top 1/32 of each bank is directory memory, and not accessable
+/* The top 1/32 of each bank is directory memory, and not accessible
* via normal reads and writes */
#define MD_DIMM_USER_SIZE(_size) ((_size) * 31 / 32)
diff -ur linux-2.5.62-1104-orig/include/asm-parisc/pgtable.h linux-2.5.62-1104/include/asm-parisc/pgtable.h
--- linux-2.5.62-1104-orig/include/asm-parisc/pgtable.h Thu Jan 16 19:22:41 2003
+++ linux-2.5.62-1104/include/asm-parisc/pgtable.h Tue Feb 18 18:12:35 2003
@@ -128,7 +128,7 @@
#define _PAGE_PRESENT_BIT 22 /* (0x200) Software: translation valid */
#define _PAGE_FLUSH_BIT 21 /* (0x400) Software: translation valid */
/* for cache flushing only */
-#define _PAGE_USER_BIT 20 /* (0x800) Software: User accessable page */
+#define _PAGE_USER_BIT 20 /* (0x800) Software: User accessible page */
/* N.B. The bits are defined in terms of a 32 bit word above, so the */
/* following macro is ok for both 32 and 64 bit. */