I've been getting lots of messages about my Maxtor 53073H4 30GB hd, and
it doesn't seem to happen under 2.4.x. Just wondering what might be
going on. If it's my drive, or something else.
Here's some info, is there anything else I can do?
/dev/hdf:
Model=Maxtor 53073H4, FwRev=JAC61HU0, SerialNo=F40AVV6C
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=60030432
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 0: 1 2 3 4 5 6
Mar 13 17:26:26 localhost kernel: hdf: dma_timer_expiry: dma status ==
0x64
Mar 13 17:26:26 localhost kernel: hdf: lost interrupt
Mar 13 17:26:26 localhost kernel: hdf: dma_intr: bad DMA status
(dma_stat=70)
Mar 13 17:26:26 localhost kernel: hdf: dma_intr: status=0x50 {
DriveReady SeekComplete }
Mar 13 17:27:05 localhost kernel: hdf: DMA disabled
Mar 13 17:27:13 localhost kernel: hdf: channel busy
Mar 13 17:27:13 localhost kernel: hdf: DMA disabled
Mar 13 17:27:19 localhost kernel: hdf: lost interrupt
Mar 13 17:27:19 localhost kernel: hdf: DMA disabled
Mar 13 17:28:42 localhost kernel: hdf: lost interrupt
On Fri, 2003-03-14 at 00:33, Shawn wrote:
> I've been getting lots of messages about my Maxtor 53073H4 30GB hd, and
> it doesn't seem to happen under 2.4.x. Just wondering what might be
> going on. If it's my drive, or something else.
What kernel are you running ?
Do you have ACPI and APIC support off ?
I'm running 2.5.64-mm6 with APIC and ACPI on.
Should I be?
On Fri, 2003-03-14 at 08:53, Alan Cox wrote:
> On Fri, 2003-03-14 at 00:33, Shawn wrote:
> > I've been getting lots of messages about my Maxtor 53073H4 30GB hd, and
> > it doesn't seem to happen under 2.4.x. Just wondering what might be
> > going on. If it's my drive, or something else.
>
> What kernel are you running ?
>
> Do you have ACPI and APIC support off ?
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/