2003-06-04 21:09:46

by Stephen Hemminger

[permalink] [raw]
Subject: 2.5.70 latest: breaks gnome

On my machine, the current 2.5.70 bk tree has a serious problem.
Using RH8.0 it will not complete the normal user graphical login.
Machine is alive, and can access it via console and other non-graphical login.

One of the gnome processes or ssh-agent gets hung?

PID TTY TIME CMD
755 ? 00:00:00 gnome-session
790 ? 00:00:00 ssh-agent
793 ? 00:00:00 gconfd-2
795 ? 00:00:00 bonobo-activati
797 ? 00:00:00 metacity
800 ? 00:00:00 gnome-settings-

2.5.70 is okay; it might be a recent change that broke part of the
networking or IPC.
--------------------------------------------------------------------------
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_EMBEDDED is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y

#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set

#
# ACPI Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_HT_ONLY is not set
CONFIG_ACPI_BOOT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y

#
# SCSI device support
#
# CONFIG_SCSI is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_FWMARK is not set
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
# CONFIG_IP_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_ARPTABLES=m
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_UINPUT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=2048

#
# I2C support
#
# CONFIG_I2C is not set

#
# I2C Hardware Sensors Mainboard support
#

#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_SOFT_WATCHDOG=y
# CONFIG_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_PCWATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_I810_TCO=y
# CONFIG_MIXCOMWD is not set
# CONFIG_SCx200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_AMD7XX_TCO is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD_8151 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_MGA=y
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=m
# CONFIG_SUNRPC_GSS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_GADGET is not set

#
# Bluetooth support
#
# CONFIG_BT is not set

#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_KALLSYMS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y


2003-06-04 22:20:40

by jjs

[permalink] [raw]
Subject: Re: 2.5.70 latest: breaks gnome

Yes, same here but running 2.5.70-mm4

gnome gdm won't start - so it looks like a
bug introduced in -bk-recent

Joe

Stephen Hemminger wrote:

>On my machine, the current 2.5.70 bk tree has a serious problem.
>Using RH8.0 it will not complete the normal user graphical login.
>Machine is alive, and can access it via console and other non-graphical login.
>
>One of the gnome processes or ssh-agent gets hung?
>
> PID TTY TIME CMD
> 755 ? 00:00:00 gnome-session
> 790 ? 00:00:00 ssh-agent
> 793 ? 00:00:00 gconfd-2
> 795 ? 00:00:00 bonobo-activati
> 797 ? 00:00:00 metacity
> 800 ? 00:00:00 gnome-settings-
>
>2.5.70 is okay; it might be a recent change that broke part of the
>networking or IPC.
>--------------------------------------------------------------------------
>#
># Automatically generated make config: don't edit
>#
>CONFIG_X86=y
>CONFIG_MMU=y
>CONFIG_UID16=y
>CONFIG_GENERIC_ISA_DMA=y
>
>#
># Code maturity level options
>#
>CONFIG_EXPERIMENTAL=y
>
>#
># General setup
>#
>CONFIG_SWAP=y
>CONFIG_SYSVIPC=y
># CONFIG_BSD_PROCESS_ACCT is not set
>CONFIG_SYSCTL=y
>CONFIG_LOG_BUF_SHIFT=16
># CONFIG_EMBEDDED is not set
>CONFIG_FUTEX=y
>CONFIG_EPOLL=y
>
>#
># Loadable module support
>#
>CONFIG_MODULES=y
>CONFIG_MODULE_UNLOAD=y
># CONFIG_MODULE_FORCE_UNLOAD is not set
>CONFIG_OBSOLETE_MODPARM=y
>CONFIG_MODVERSIONS=y
>CONFIG_KMOD=y
>
>#
># Processor type and features
>#
>CONFIG_X86_PC=y
># CONFIG_X86_VOYAGER is not set
># CONFIG_X86_NUMAQ is not set
># CONFIG_X86_SUMMIT is not set
># CONFIG_X86_BIGSMP is not set
># CONFIG_X86_VISWS is not set
># CONFIG_X86_GENERICARCH is not set
># CONFIG_M386 is not set
># CONFIG_M486 is not set
># CONFIG_M586 is not set
># CONFIG_M586TSC is not set
># CONFIG_M586MMX is not set
># CONFIG_M686 is not set
># CONFIG_MPENTIUMII is not set
># CONFIG_MPENTIUMIII is not set
>CONFIG_MPENTIUM4=y
># CONFIG_MK6 is not set
># CONFIG_MK7 is not set
># CONFIG_MK8 is not set
># CONFIG_MELAN is not set
># CONFIG_MCRUSOE is not set
># CONFIG_MWINCHIPC6 is not set
># CONFIG_MWINCHIP2 is not set
># CONFIG_MWINCHIP3D is not set
># CONFIG_MCYRIXIII is not set
># CONFIG_MVIAC3_2 is not set
># CONFIG_X86_GENERIC is not set
>CONFIG_X86_CMPXCHG=y
>CONFIG_X86_XADD=y
>CONFIG_X86_L1_CACHE_SHIFT=7
>CONFIG_RWSEM_XCHGADD_ALGORITHM=y
>CONFIG_X86_WP_WORKS_OK=y
>CONFIG_X86_INVLPG=y
>CONFIG_X86_BSWAP=y
>CONFIG_X86_POPAD_OK=y
>CONFIG_X86_GOOD_APIC=y
>CONFIG_X86_INTEL_USERCOPY=y
>CONFIG_X86_USE_PPRO_CHECKSUM=y
># CONFIG_HUGETLB_PAGE is not set
>CONFIG_SMP=y
>CONFIG_NR_CPUS=2
># CONFIG_PREEMPT is not set
>CONFIG_X86_LOCAL_APIC=y
>CONFIG_X86_IO_APIC=y
>CONFIG_X86_TSC=y
>CONFIG_X86_MCE=y
>CONFIG_X86_MCE_NONFATAL=y
>CONFIG_X86_MCE_P4THERMAL=y
># CONFIG_TOSHIBA is not set
># CONFIG_I8K is not set
># CONFIG_MICROCODE is not set
>CONFIG_X86_MSR=m
>CONFIG_X86_CPUID=m
># CONFIG_EDD is not set
># CONFIG_NOHIGHMEM is not set
>CONFIG_HIGHMEM4G=y
># CONFIG_HIGHMEM64G is not set
>CONFIG_HIGHMEM=y
># CONFIG_HIGHPTE is not set
># CONFIG_MATH_EMULATION is not set
>CONFIG_MTRR=y
>CONFIG_HAVE_DEC_LOCK=y
>
>#
># Power management options (ACPI, APM)
>#
># CONFIG_PM is not set
>
>#
># ACPI Support
>#
>CONFIG_ACPI=y
># CONFIG_ACPI_HT_ONLY is not set
>CONFIG_ACPI_BOOT=y
># CONFIG_ACPI_AC is not set
># CONFIG_ACPI_BATTERY is not set
># CONFIG_ACPI_BUTTON is not set
># CONFIG_ACPI_FAN is not set
># CONFIG_ACPI_PROCESSOR is not set
># CONFIG_ACPI_TOSHIBA is not set
># CONFIG_ACPI_DEBUG is not set
>CONFIG_ACPI_BUS=y
>CONFIG_ACPI_INTERPRETER=y
>CONFIG_ACPI_EC=y
>CONFIG_ACPI_POWER=y
>CONFIG_ACPI_PCI=y
>CONFIG_ACPI_SYSTEM=y
>
>#
># CPU Frequency scaling
>#
># CONFIG_CPU_FREQ is not set
>
>#
># Bus options (PCI, PCMCIA, EISA, MCA, ISA)
>#
>CONFIG_PCI=y
># CONFIG_PCI_GOBIOS is not set
># CONFIG_PCI_GODIRECT is not set
>CONFIG_PCI_GOANY=y
>CONFIG_PCI_BIOS=y
>CONFIG_PCI_DIRECT=y
># CONFIG_PCI_LEGACY_PROC is not set
>CONFIG_PCI_NAMES=y
>CONFIG_ISA=y
># CONFIG_EISA is not set
># CONFIG_MCA is not set
># CONFIG_SCx200 is not set
>CONFIG_HOTPLUG=y
>
>#
># PCMCIA/CardBus support
>#
># CONFIG_PCMCIA is not set
>CONFIG_PCMCIA_PROBE=y
>
>#
># PCI Hotplug Support
>#
># CONFIG_HOTPLUG_PCI is not set
>
>#
># Executable file formats
>#
>CONFIG_KCORE_ELF=y
># CONFIG_KCORE_AOUT is not set
>CONFIG_BINFMT_AOUT=m
>CONFIG_BINFMT_ELF=y
>CONFIG_BINFMT_MISC=m
>
>#
># Memory Technology Devices (MTD)
>#
># CONFIG_MTD is not set
>
>#
># Parallel port support
>#
># CONFIG_PARPORT is not set
>
>#
># Plug and Play support
>#
># CONFIG_PNP is not set
>
>#
># Block devices
>#
>CONFIG_BLK_DEV_FD=y
># CONFIG_BLK_DEV_XD is not set
># CONFIG_BLK_CPQ_DA is not set
># CONFIG_BLK_CPQ_CISS_DA is not set
># CONFIG_BLK_DEV_DAC960 is not set
># CONFIG_BLK_DEV_UMEM is not set
>CONFIG_BLK_DEV_LOOP=y
># CONFIG_BLK_DEV_NBD is not set
>CONFIG_BLK_DEV_RAM=y
>CONFIG_BLK_DEV_RAM_SIZE=4096
>CONFIG_BLK_DEV_INITRD=y
># CONFIG_LBD is not set
>
>#
># ATA/ATAPI/MFM/RLL device support
>#
>CONFIG_IDE=y
>
>#
># IDE, ATA and ATAPI Block devices
>#
>CONFIG_BLK_DEV_IDE=y
>
>#
># Please see Documentation/ide.txt for help/info on IDE drives
>#
># CONFIG_BLK_DEV_HD_IDE is not set
># CONFIG_BLK_DEV_HD is not set
>CONFIG_BLK_DEV_IDEDISK=y
>CONFIG_IDEDISK_MULTI_MODE=y
># CONFIG_IDEDISK_STROKE is not set
>CONFIG_BLK_DEV_IDECD=y
># CONFIG_BLK_DEV_IDEFLOPPY is not set
># CONFIG_IDE_TASK_IOCTL is not set
>
>#
># IDE chipset support/bugfixes
>#
># CONFIG_BLK_DEV_CMD640 is not set
>CONFIG_BLK_DEV_IDEPCI=y
>CONFIG_BLK_DEV_GENERIC=y
>CONFIG_IDEPCI_SHARE_IRQ=y
>CONFIG_BLK_DEV_IDEDMA_PCI=y
># CONFIG_BLK_DEV_IDE_TCQ is not set
># CONFIG_BLK_DEV_OFFBOARD is not set
># CONFIG_BLK_DEV_IDEDMA_FORCED is not set
>CONFIG_IDEDMA_PCI_AUTO=y
># CONFIG_IDEDMA_ONLYDISK is not set
>CONFIG_BLK_DEV_IDEDMA=y
># CONFIG_IDEDMA_PCI_WIP is not set
>CONFIG_BLK_DEV_ADMA=y
># CONFIG_BLK_DEV_AEC62XX is not set
># CONFIG_BLK_DEV_ALI15X3 is not set
># CONFIG_BLK_DEV_AMD74XX is not set
># CONFIG_BLK_DEV_CMD64X is not set
># CONFIG_BLK_DEV_TRIFLEX is not set
># CONFIG_BLK_DEV_CY82C693 is not set
># CONFIG_BLK_DEV_CS5520 is not set
># CONFIG_BLK_DEV_HPT34X is not set
># CONFIG_BLK_DEV_HPT366 is not set
># CONFIG_BLK_DEV_SC1200 is not set
>CONFIG_BLK_DEV_PIIX=y
># CONFIG_BLK_DEV_NS87415 is not set
># CONFIG_BLK_DEV_OPTI621 is not set
># CONFIG_BLK_DEV_PDC202XX_OLD is not set
># CONFIG_BLK_DEV_PDC202XX_NEW is not set
># CONFIG_BLK_DEV_RZ1000 is not set
># CONFIG_BLK_DEV_SVWKS is not set
># CONFIG_BLK_DEV_SIIMAGE is not set
># CONFIG_BLK_DEV_SIS5513 is not set
># CONFIG_BLK_DEV_SLC90E66 is not set
># CONFIG_BLK_DEV_TRM290 is not set
># CONFIG_BLK_DEV_VIA82CXXX is not set
># CONFIG_IDE_CHIPSETS is not set
>CONFIG_IDEDMA_AUTO=y
># CONFIG_IDEDMA_IVB is not set
>CONFIG_BLK_DEV_IDE_MODES=y
>
>#
># SCSI device support
>#
># CONFIG_SCSI is not set
>
>#
># Old CD-ROM drivers (not SCSI, not IDE)
>#
># CONFIG_CD_NO_IDESCSI is not set
>
>#
># Multi-device support (RAID and LVM)
>#
># CONFIG_MD is not set
>
>#
># Fusion MPT device support
>#
>
>#
># IEEE 1394 (FireWire) support (EXPERIMENTAL)
>#
># CONFIG_IEEE1394 is not set
>
>#
># I2O device support
>#
># CONFIG_I2O is not set
>
>#
># Networking support
>#
>CONFIG_NET=y
>
>#
># Networking options
>#
>CONFIG_PACKET=y
>CONFIG_PACKET_MMAP=y
>CONFIG_NETLINK_DEV=y
>CONFIG_NETFILTER=y
># CONFIG_NETFILTER_DEBUG is not set
>CONFIG_UNIX=y
># CONFIG_NET_KEY is not set
>CONFIG_INET=y
>CONFIG_IP_MULTICAST=y
>CONFIG_IP_ADVANCED_ROUTER=y
>CONFIG_IP_MULTIPLE_TABLES=y
># CONFIG_IP_ROUTE_FWMARK is not set
>CONFIG_IP_ROUTE_NAT=y
>CONFIG_IP_ROUTE_MULTIPATH=y
>CONFIG_IP_ROUTE_TOS=y
>CONFIG_IP_ROUTE_VERBOSE=y
># CONFIG_IP_PNP is not set
># CONFIG_NET_IPIP is not set
># CONFIG_NET_IPGRE is not set
># CONFIG_IP_MROUTE is not set
># CONFIG_ARPD is not set
># CONFIG_INET_ECN is not set
>CONFIG_SYN_COOKIES=y
># CONFIG_INET_AH is not set
># CONFIG_INET_ESP is not set
># CONFIG_INET_IPCOMP is not set
>
>#
># IP: Netfilter Configuration
>#
>CONFIG_IP_NF_CONNTRACK=m
># CONFIG_IP_NF_FTP is not set
># CONFIG_IP_NF_IRC is not set
># CONFIG_IP_NF_TFTP is not set
># CONFIG_IP_NF_AMANDA is not set
>CONFIG_IP_NF_QUEUE=m
>CONFIG_IP_NF_IPTABLES=m
>CONFIG_IP_NF_MATCH_LIMIT=m
>CONFIG_IP_NF_MATCH_MAC=m
>CONFIG_IP_NF_MATCH_PKTTYPE=m
>CONFIG_IP_NF_MATCH_MARK=m
>CONFIG_IP_NF_MATCH_MULTIPORT=m
>CONFIG_IP_NF_MATCH_TOS=m
>CONFIG_IP_NF_MATCH_ECN=m
>CONFIG_IP_NF_MATCH_DSCP=m
>CONFIG_IP_NF_MATCH_AH_ESP=m
>CONFIG_IP_NF_MATCH_LENGTH=m
>CONFIG_IP_NF_MATCH_TTL=m
>CONFIG_IP_NF_MATCH_TCPMSS=m
>CONFIG_IP_NF_MATCH_HELPER=m
>CONFIG_IP_NF_MATCH_STATE=m
>CONFIG_IP_NF_MATCH_CONNTRACK=m
>CONFIG_IP_NF_MATCH_UNCLEAN=m
>CONFIG_IP_NF_MATCH_OWNER=m
>CONFIG_IP_NF_FILTER=m
>CONFIG_IP_NF_TARGET_REJECT=m
>CONFIG_IP_NF_TARGET_MIRROR=m
># CONFIG_IP_NF_NAT is not set
># CONFIG_IP_NF_MANGLE is not set
># CONFIG_IP_NF_TARGET_LOG is not set
># CONFIG_IP_NF_TARGET_ULOG is not set
># CONFIG_IP_NF_TARGET_TCPMSS is not set
>CONFIG_IP_NF_ARPTABLES=m
># CONFIG_IP_NF_ARPFILTER is not set
># CONFIG_IP_NF_COMPAT_IPCHAINS is not set
># CONFIG_IP_NF_COMPAT_IPFWADM is not set
># CONFIG_IPV6 is not set
># CONFIG_XFRM_USER is not set
>
>#
># SCTP Configuration (EXPERIMENTAL)
>#
>CONFIG_IPV6_SCTP__=y
># CONFIG_IP_SCTP is not set
># CONFIG_ATM is not set
># CONFIG_VLAN_8021Q is not set
># CONFIG_LLC is not set
># CONFIG_DECNET is not set
># CONFIG_BRIDGE is not set
># CONFIG_X25 is not set
># CONFIG_LAPB is not set
># CONFIG_NET_DIVERT is not set
># CONFIG_ECONET is not set
># CONFIG_WAN_ROUTER is not set
># CONFIG_NET_FASTROUTE is not set
># CONFIG_NET_HW_FLOWCONTROL is not set
>
>#
># QoS and/or fair queueing
>#
># CONFIG_NET_SCHED is not set
>
>#
># Network testing
>#
># CONFIG_NET_PKTGEN is not set
>CONFIG_NETDEVICES=y
>
>#
># ARCnet devices
>#
># CONFIG_ARCNET is not set
># CONFIG_DUMMY is not set
># CONFIG_BONDING is not set
># CONFIG_EQUALIZER is not set
># CONFIG_TUN is not set
># CONFIG_ETHERTAP is not set
>
>#
># Ethernet (10 or 100Mbit)
>#
>CONFIG_NET_ETHERNET=y
>CONFIG_MII=m
># CONFIG_HAPPYMEAL is not set
># CONFIG_SUNGEM is not set
># CONFIG_NET_VENDOR_3COM is not set
># CONFIG_LANCE is not set
># CONFIG_NET_VENDOR_SMC is not set
># CONFIG_NET_VENDOR_RACAL is not set
>
>#
># Tulip family network device support
>#
># CONFIG_NET_TULIP is not set
># CONFIG_AT1700 is not set
># CONFIG_DEPCA is not set
># CONFIG_HP100 is not set
># CONFIG_NET_ISA is not set
>CONFIG_NET_PCI=y
># CONFIG_PCNET32 is not set
># CONFIG_AMD8111_ETH is not set
># CONFIG_ADAPTEC_STARFIRE is not set
># CONFIG_AC3200 is not set
># CONFIG_APRICOT is not set
># CONFIG_B44 is not set
># CONFIG_CS89x0 is not set
># CONFIG_DGRS is not set
># CONFIG_EEPRO100 is not set
>CONFIG_E100=m
># CONFIG_FEALNX is not set
># CONFIG_NATSEMI is not set
># CONFIG_NE2K_PCI is not set
># CONFIG_8139CP is not set
>CONFIG_8139TOO=m
># CONFIG_8139TOO_PIO is not set
># CONFIG_8139TOO_TUNE_TWISTER is not set
># CONFIG_8139TOO_8129 is not set
># CONFIG_8139_OLD_RX_RESET is not set
># CONFIG_SIS900 is not set
># CONFIG_EPIC100 is not set
># CONFIG_SUNDANCE is not set
># CONFIG_TLAN is not set
># CONFIG_VIA_RHINE is not set
># CONFIG_NET_POCKET is not set
>
>#
># Ethernet (1000 Mbit)
>#
># CONFIG_ACENIC is not set
># CONFIG_DL2K is not set
>CONFIG_E1000=m
># CONFIG_E1000_NAPI is not set
># CONFIG_NS83820 is not set
># CONFIG_HAMACHI is not set
># CONFIG_YELLOWFIN is not set
># CONFIG_R8169 is not set
># CONFIG_SK98LIN is not set
># CONFIG_TIGON3 is not set
>
>#
># Ethernet (10000 Mbit)
>#
>CONFIG_IXGB=m
>CONFIG_IXGB_NAPI=y
># CONFIG_FDDI is not set
># CONFIG_HIPPI is not set
># CONFIG_PPP is not set
># CONFIG_SLIP is not set
>
>#
># Wireless LAN (non-hamradio)
>#
># CONFIG_NET_RADIO is not set
>
>#
># Token Ring devices (depends on LLC=y)
>#
># CONFIG_RCPCI is not set
># CONFIG_SHAPER is not set
>
>#
># Wan interfaces
>#
># CONFIG_WAN is not set
>
>#
># Amateur Radio support
>#
># CONFIG_HAMRADIO is not set
>
>#
># IrDA (infrared) support
>#
># CONFIG_IRDA is not set
>
>#
># ISDN subsystem
>#
># CONFIG_ISDN_BOOL is not set
>
>#
># Telephony Support
>#
># CONFIG_PHONE is not set
>
>#
># Input device support
>#
>CONFIG_INPUT=y
>
>#
># Userland interfaces
>#
>CONFIG_INPUT_MOUSEDEV=y
>CONFIG_INPUT_MOUSEDEV_PSAUX=y
>CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
>CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
># CONFIG_INPUT_JOYDEV is not set
># CONFIG_INPUT_TSDEV is not set
>CONFIG_INPUT_EVDEV=y
># CONFIG_INPUT_EVBUG is not set
>
>#
># Input I/O drivers
>#
># CONFIG_GAMEPORT is not set
>CONFIG_SOUND_GAMEPORT=y
>CONFIG_SERIO=y
>CONFIG_SERIO_I8042=y
>CONFIG_SERIO_SERPORT=y
># CONFIG_SERIO_CT82C710 is not set
>
>#
># Input Device Drivers
>#
>CONFIG_INPUT_KEYBOARD=y
>CONFIG_KEYBOARD_ATKBD=y
># CONFIG_KEYBOARD_SUNKBD is not set
># CONFIG_KEYBOARD_XTKBD is not set
># CONFIG_KEYBOARD_NEWTON is not set
>CONFIG_INPUT_MOUSE=y
>CONFIG_MOUSE_PS2=y
>CONFIG_MOUSE_SERIAL=y
># CONFIG_MOUSE_INPORT is not set
># CONFIG_MOUSE_LOGIBM is not set
># CONFIG_MOUSE_PC110PAD is not set
># CONFIG_INPUT_JOYSTICK is not set
># CONFIG_INPUT_TOUCHSCREEN is not set
>CONFIG_INPUT_MISC=y
>CONFIG_INPUT_PCSPKR=y
># CONFIG_INPUT_UINPUT is not set
>
>#
># Character devices
>#
>CONFIG_VT=y
>CONFIG_VT_CONSOLE=y
>CONFIG_HW_CONSOLE=y
># CONFIG_SERIAL_NONSTANDARD is not set
>
>#
># Serial drivers
>#
>CONFIG_SERIAL_8250=y
>CONFIG_SERIAL_8250_CONSOLE=y
># CONFIG_SERIAL_8250_EXTENDED is not set
>
>#
># Non-8250 serial port support
>#
>CONFIG_SERIAL_CORE=y
>CONFIG_SERIAL_CORE_CONSOLE=y
>CONFIG_UNIX98_PTYS=y
>CONFIG_UNIX98_PTY_COUNT=2048
>
>#
># I2C support
>#
># CONFIG_I2C is not set
>
>#
># I2C Hardware Sensors Mainboard support
>#
>
>#
># I2C Hardware Sensors Chip support
>#
># CONFIG_I2C_SENSOR is not set
>
>#
># Mice
>#
># CONFIG_BUSMOUSE is not set
># CONFIG_QIC02_TAPE is not set
>
>#
># IPMI
>#
># CONFIG_IPMI_HANDLER is not set
>
>#
># Watchdog Cards
>#
>CONFIG_WATCHDOG=y
># CONFIG_WATCHDOG_NOWAYOUT is not set
>CONFIG_SOFT_WATCHDOG=y
># CONFIG_WDT is not set
># CONFIG_WDTPCI is not set
># CONFIG_PCWATCHDOG is not set
># CONFIG_ACQUIRE_WDT is not set
># CONFIG_ADVANTECH_WDT is not set
># CONFIG_EUROTECH_WDT is not set
># CONFIG_IB700_WDT is not set
>CONFIG_I810_TCO=y
># CONFIG_MIXCOMWD is not set
># CONFIG_SCx200_WDT is not set
># CONFIG_60XX_WDT is not set
># CONFIG_W83877F_WDT is not set
># CONFIG_MACHZ_WDT is not set
># CONFIG_SC520_WDT is not set
># CONFIG_AMD7XX_TCO is not set
># CONFIG_ALIM7101_WDT is not set
># CONFIG_SC1200_WDT is not set
># CONFIG_WAFER_WDT is not set
># CONFIG_CPU5_WDT is not set
># CONFIG_HW_RANDOM is not set
># CONFIG_NVRAM is not set
>CONFIG_RTC=y
># CONFIG_DTLK is not set
># CONFIG_R3964 is not set
># CONFIG_APPLICOM is not set
># CONFIG_SONYPI is not set
>
>#
># Ftape, the floppy tape device driver
>#
># CONFIG_FTAPE is not set
>CONFIG_AGP=y
># CONFIG_AGP_ALI is not set
># CONFIG_AGP_AMD is not set
># CONFIG_AGP_AMD_8151 is not set
>CONFIG_AGP_INTEL=y
># CONFIG_AGP_NVIDIA is not set
># CONFIG_AGP_SIS is not set
># CONFIG_AGP_SWORKS is not set
># CONFIG_AGP_VIA is not set
>CONFIG_DRM=y
># CONFIG_DRM_TDFX is not set
># CONFIG_DRM_GAMMA is not set
># CONFIG_DRM_R128 is not set
># CONFIG_DRM_RADEON is not set
># CONFIG_DRM_I810 is not set
># CONFIG_DRM_I830 is not set
>CONFIG_DRM_MGA=y
># CONFIG_MWAVE is not set
># CONFIG_RAW_DRIVER is not set
># CONFIG_HANGCHECK_TIMER is not set
>
>#
># Multimedia devices
>#
># CONFIG_VIDEO_DEV is not set
>
>#
># Digital Video Broadcasting Devices
>#
># CONFIG_DVB is not set
>
>#
># File systems
>#
>CONFIG_EXT2_FS=y
># CONFIG_EXT2_FS_XATTR is not set
>CONFIG_EXT3_FS=m
>CONFIG_EXT3_FS_XATTR=y
>CONFIG_EXT3_FS_POSIX_ACL=y
># CONFIG_EXT3_FS_SECURITY is not set
>CONFIG_JBD=m
># CONFIG_JBD_DEBUG is not set
>CONFIG_FS_MBCACHE=y
>CONFIG_REISERFS_FS=m
># CONFIG_REISERFS_CHECK is not set
># CONFIG_REISERFS_PROC_INFO is not set
># CONFIG_JFS_FS is not set
>CONFIG_FS_POSIX_ACL=y
># CONFIG_XFS_FS is not set
># CONFIG_MINIX_FS is not set
># CONFIG_ROMFS_FS is not set
># CONFIG_QUOTA is not set
># CONFIG_AUTOFS_FS is not set
># CONFIG_AUTOFS4_FS is not set
>
>#
># CD-ROM/DVD Filesystems
>#
>CONFIG_ISO9660_FS=y
># CONFIG_JOLIET is not set
># CONFIG_ZISOFS is not set
># CONFIG_UDF_FS is not set
>
>#
># DOS/FAT/NT Filesystems
>#
>CONFIG_FAT_FS=m
>CONFIG_MSDOS_FS=m
>CONFIG_VFAT_FS=m
># CONFIG_NTFS_FS is not set
>
>#
># Pseudo filesystems
>#
>CONFIG_PROC_FS=y
># CONFIG_DEVFS_FS is not set
>CONFIG_DEVPTS_FS=y
># CONFIG_DEVPTS_FS_XATTR is not set
>CONFIG_TMPFS=y
>CONFIG_RAMFS=y
>
>#
># Miscellaneous filesystems
>#
># CONFIG_ADFS_FS is not set
># CONFIG_AFFS_FS is not set
># CONFIG_HFS_FS is not set
># CONFIG_BEFS_FS is not set
># CONFIG_BFS_FS is not set
># CONFIG_EFS_FS is not set
># CONFIG_CRAMFS is not set
># CONFIG_VXFS_FS is not set
># CONFIG_HPFS_FS is not set
># CONFIG_QNX4FS_FS is not set
># CONFIG_SYSV_FS is not set
># CONFIG_UFS_FS is not set
>
>#
># Network File Systems
>#
>CONFIG_NFS_FS=m
>CONFIG_NFS_V3=y
># CONFIG_NFS_V4 is not set
># CONFIG_NFSD is not set
>CONFIG_LOCKD=m
>CONFIG_LOCKD_V4=y
># CONFIG_EXPORTFS is not set
>CONFIG_SUNRPC=m
># CONFIG_SUNRPC_GSS is not set
># CONFIG_SMB_FS is not set
># CONFIG_CIFS is not set
># CONFIG_NCP_FS is not set
># CONFIG_CODA_FS is not set
># CONFIG_INTERMEZZO_FS is not set
># CONFIG_AFS_FS is not set
>
>#
># Partition Types
>#
># CONFIG_PARTITION_ADVANCED is not set
>CONFIG_MSDOS_PARTITION=y
>CONFIG_NLS=y
>
>#
># Native Language Support
>#
>CONFIG_NLS_DEFAULT="iso8859-1"
># CONFIG_NLS_CODEPAGE_437 is not set
># CONFIG_NLS_CODEPAGE_737 is not set
># CONFIG_NLS_CODEPAGE_775 is not set
># CONFIG_NLS_CODEPAGE_850 is not set
># CONFIG_NLS_CODEPAGE_852 is not set
># CONFIG_NLS_CODEPAGE_855 is not set
># CONFIG_NLS_CODEPAGE_857 is not set
># CONFIG_NLS_CODEPAGE_860 is not set
># CONFIG_NLS_CODEPAGE_861 is not set
># CONFIG_NLS_CODEPAGE_862 is not set
># CONFIG_NLS_CODEPAGE_863 is not set
># CONFIG_NLS_CODEPAGE_864 is not set
># CONFIG_NLS_CODEPAGE_865 is not set
># CONFIG_NLS_CODEPAGE_866 is not set
># CONFIG_NLS_CODEPAGE_869 is not set
># CONFIG_NLS_CODEPAGE_936 is not set
># CONFIG_NLS_CODEPAGE_950 is not set
># CONFIG_NLS_CODEPAGE_932 is not set
># CONFIG_NLS_CODEPAGE_949 is not set
># CONFIG_NLS_CODEPAGE_874 is not set
># CONFIG_NLS_ISO8859_8 is not set
># CONFIG_NLS_CODEPAGE_1250 is not set
># CONFIG_NLS_CODEPAGE_1251 is not set
># CONFIG_NLS_ISO8859_1 is not set
># CONFIG_NLS_ISO8859_2 is not set
># CONFIG_NLS_ISO8859_3 is not set
># CONFIG_NLS_ISO8859_4 is not set
># CONFIG_NLS_ISO8859_5 is not set
># CONFIG_NLS_ISO8859_6 is not set
># CONFIG_NLS_ISO8859_7 is not set
># CONFIG_NLS_ISO8859_9 is not set
># CONFIG_NLS_ISO8859_13 is not set
># CONFIG_NLS_ISO8859_14 is not set
># CONFIG_NLS_ISO8859_15 is not set
># CONFIG_NLS_KOI8_R is not set
># CONFIG_NLS_KOI8_U is not set
># CONFIG_NLS_UTF8 is not set
>
>#
># Graphics support
>#
># CONFIG_FB is not set
>CONFIG_VIDEO_SELECT=y
>
>#
># Console display driver support
>#
>CONFIG_VGA_CONSOLE=y
># CONFIG_MDA_CONSOLE is not set
>CONFIG_DUMMY_CONSOLE=y
>
>#
># Sound
>#
># CONFIG_SOUND is not set
>
>#
># USB support
>#
># CONFIG_USB is not set
># CONFIG_USB_GADGET is not set
>
>#
># Bluetooth support
>#
># CONFIG_BT is not set
>
>#
># Profiling support
>#
>CONFIG_PROFILING=y
>CONFIG_OPROFILE=y
>
>#
># Kernel hacking
>#
>CONFIG_DEBUG_KERNEL=y
># CONFIG_DEBUG_STACKOVERFLOW is not set
># CONFIG_DEBUG_SLAB is not set
># CONFIG_DEBUG_IOVIRT is not set
>CONFIG_MAGIC_SYSRQ=y
>CONFIG_DEBUG_SPINLOCK=y
># CONFIG_DEBUG_HIGHMEM is not set
>CONFIG_KALLSYMS=y
>CONFIG_DEBUG_SPINLOCK_SLEEP=y
>CONFIG_FRAME_POINTER=y
>CONFIG_X86_EXTRA_IRQS=y
>CONFIG_X86_FIND_SMP_CONFIG=y
>CONFIG_X86_MPPARSE=y
>
>#
># Security options
>#
># CONFIG_SECURITY is not set
>
>#
># Cryptographic options
>#
># CONFIG_CRYPTO is not set
>
>#
># Library routines
>#
># CONFIG_CRC32 is not set
>CONFIG_X86_SMP=y
>CONFIG_X86_HT=y
>CONFIG_X86_BIOS_REBOOT=y
>CONFIG_X86_TRAMPOLINE=y
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to [email protected]
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
>
>
>


2003-06-04 23:09:52

by Stephen Hemminger

[permalink] [raw]
Subject: Re: 2.5.70 latest: breaks gnome

Here is a repeat of the gnome login hang with sysrq back trace of interesting processes:

gnome-session S 00000000 2688832 791 735 826 (NOTLB)
Call Trace:
[<c013fe19>] __get_free_pages+0x35/0x40
[<c012ab95>] schedule_timeout+0xb9/0xbc
[<c023c282>] sock_poll+0x26/0x2a
[<c0170a97>] do_pollfd+0x57/0x98
[<c0170b7d>] do_poll+0xa5/0xc4
[<c0170cfc>] sys_poll+0x160/0x237
[<c015bb97>] sys_read+0x3f/0x5e
[<c01700fc>] __pollwait+0x0/0xaa
[<c010b22d>] sysenter_past_esp+0x52/0x71

ssh-agent S 00000001 5441264 826 791 (NOTLB)
Call Trace:
[<c012ab95>] schedule_timeout+0xb9/0xbc
[<c0170134>] __pollwait+0x38/0xaa
[<c0299f3f>] unix_poll+0x2b/0x9c
[<c023c282>] sock_poll+0x26/0x2a
[<c0170413>] do_select+0x18b/0x2e4
[<c017058a>] select_bits_alloc+0x1e/0x22
[<c01700fc>] __pollwait+0x0/0xaa
[<c017083e>] sys_select+0x2a6/0x4a8
[<c010b22d>] sysenter_past_esp+0x52/0x71

gconfd-2 S 00000000 4274957916 829 1 831 720 (NOTLB)
Call Trace:
[<c0170134>] __pollwait+0x38/0xaa
[<c012ab46>] schedule_timeout+0x6a/0xbc
[<c012aad0>] process_timeout+0x0/0xc
[<c0170b7d>] do_poll+0xa5/0xc4
[<c0170cfc>] sys_poll+0x160/0x237
[<c0111b1f>] do_gettimeofday+0x1f/0x9c
[<c01700fc>] __pollwait+0x0/0xaa
[<c010b22d>] sysenter_past_esp+0x52/0x71

bonobo-activa S 00000001 4272089640 831 1 833 829 (NOTLB)
Call Trace:
[<c013fe19>] __get_free_pages+0x35/0x40
[<c0170134>] __pollwait+0x38/0xaa
[<c012ab95>] schedule_timeout+0xb9/0xbc
[<c0169b43>] pipe_poll+0x33/0x7a
[<c0170a97>] do_pollfd+0x57/0x98
[<c0170b7d>] do_poll+0xa5/0xc4
[<c0170cfc>] sys_poll+0x160/0x237
[<c016f0d8>] sys_fcntl64+0x50/0x8c
[<c01700fc>] __pollwait+0x0/0xaa
[<c010b22d>] sysenter_past_esp+0x52/0x71

metacity S 00000001 4274282128 833 1 836 831 (NOTLB)
Call Trace:
[<f88387e9>] journal_dirty_metadata+0x1c3/0x270 [jbd]
[<c012ab95>] schedule_timeout+0xb9/0xbc
[<c0142483>] check_poison_obj+0x3b/0x198
[<c02995d1>] unix_stream_data_wait+0xed/0x148
[<c011f5b2>] autoremove_wake_function+0x0/0x4c
[<c023f62f>] alloc_skb+0x47/0xe0
[<c011f5b2>] autoremove_wake_function+0x0/0x4c
[<c023ecad>] sock_alloc_send_pskb+0xd5/0x1fe
[<c0299bbc>] unix_stream_recvmsg+0x590/0x632
[<c023ee04>] sock_alloc_send_skb+0x2e/0x32
[<c013d095>] filemap_nopage+0x1e5/0x2ce
[<c023bbae>] sock_aio_read+0xc0/0xc8
[<c015b842>] do_sync_read+0x8a/0xb6
[<c015b957>] vfs_read+0xe9/0x11a
[<c015bb97>] sys_read+0x3f/0x5e
[<c010b22d>] sysenter_past_esp+0x52/0x71

gnome-setting S 00000001 4278248440 836 1 833 (NOTLB)
Call Trace:
[<c0271783>] tcp_v4_connect+0x42f/0x68c
[<c012ab95>] schedule_timeout+0xb9/0xbc
[<c028452b>] inet_wait_for_connect+0x105/0x256
[<c011f5b2>] autoremove_wake_function+0x0/0x4c
[<c011f5b2>] autoremove_wake_function+0x0/0x4c
[<c0284866>] inet_stream_connect+0x1ea/0x30a
[<c023b505>] move_addr_to_kernel+0x6b/0x70
[<c023cd62>] sys_connect+0x78/0x9a
[<c011a89e>] do_page_fault+0x15e/0x4ab
[<c023c944>] sys_socket+0x3a/0x56
[<c023d846>] sys_socketcall+0xb2/0x262
[<c014efc2>] sys_munmap+0x58/0x78
[<c010b22d>] sysenter_past_esp+0x52/0x71

2003-06-05 17:58:56

by Stephen Hemminger

[permalink] [raw]
Subject: Re: 2.5.70 latest: breaks gnome

On Wed, 04 Jun 2003 15:32:56 -0700
jjs <[email protected]> wrote:

> Yes, same here but running 2.5.70-mm4
>
> gnome gdm won't start - so it looks like a
> bug introduced in -bk-recent
>
> Joe
>
> Stephen Hemminger wrote:
>
> >On my machine, the current 2.5.70 bk tree has a serious problem.
> >Using RH8.0 it will not complete the normal user graphical login.
> >Machine is alive, and can access it via console and other non-graphical login.
> >
> >One of the gnome processes or ssh-agent gets hung?


This got fixed with last night's changes. I assume it was related to the net/core/iovec.c fix.

2003-06-05 21:23:56

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.5.70 latest: breaks gnome

jjs <[email protected]> wrote:
>
> darn - looks like the fix didn't make it into -mm5

It did. If you're seeing a problem we'll need a new report I think.

2003-06-05 21:45:18

by jjs

[permalink] [raw]
Subject: Re: 2.5.70 latest: breaks gnome

Hello, this may be of interest:

2.5.70-mm3: gdm is fine
2.5.70-mm4: gdm broken, won't start
2.5.70-mm5: gdm still broken, won't start, despite reports of a fix

Hardware:
-------------
celeron 1.2 G on genuine intel motherboard
2X e100 ethernet
40 GB IDE
512 MB RAM

Distro:
-----------
Red Hat 9 w/ all updates

config attached


There is no associated kernel oops, only
an error message from gdm -

Here is the relevant snippet from syslog:

Jun 5 12:47:47 jyro portsentry: Starting portsentry -audp: succeeded
Jun 5 12:47:48 jyro kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jun 5 12:47:48 jyro kernel: ip_conntrack version 2.1 (4086 buckets,
32688 max)
- 324 bytes per conntrack
Jun 5 12:47:52 jyro gdm[1288]: gdm_slave_xioerror_handler: Fatal X
error - Rest
arting :0
Jun 5 12:47:54 jyro gdm[1295]: gdm_slave_xioerror_handler: Fatal X
error - Rest
arting :0
Jun 5 12:47:58 jyro gdm[1301]: gdm_slave_xioerror_handler: Fatal X
error - Rest
arting :0
Jun 5 12:48:02 jyro gdm[1309]: gdm_slave_xioerror_handler: Fatal X
error - Rest
arting :0
Jun 5 12:48:02 jyro gdm[1242]: deal_with_x_crashes: Running the
XKeepsCrashing
script


Attachments:
config (26.02 kB)

2003-06-05 22:20:18

by Edward Tandi

[permalink] [raw]
Subject: Re: 2.5.70 latest: breaks gnome

FYI,

I have just tried mm5. I have Gnome2 working (using kdm) but am still
having the same problems as mm3:

1) gnome-terminal still only works as root.

2) xosview still freezes (reading /proc/*)

3) rmmod still not working -"Can't open 'analog': No such file or
directory"

4) su - <user> returns "operation not permitted". Works as root though
and thereafter as <user>.

5) This is the second time this has happened after switching to 2.5.x;
My Evolution groups (left-hand icon bar) have gone missing.

6) from /var/log/messages: /sbin/mingetty[2583]: /dev/tty4: cannot open
tty: Inappropriate ioctl for device

7) Excessive "anticipatory scheduling elevator" messages allover in
/var/log/messages.

8) from dmesg: process `named' is using obsolete setsockopt SO_BSDCOMPAT

I think there is something "not quite right" in the terminal I/O area.

Ed-T.


On Thu, 2003-06-05 at 22:58, jjs wrote:
> Hello, this may be of interest:
>
> 2.5.70-mm3: gdm is fine
> 2.5.70-mm4: gdm broken, won't start
> 2.5.70-mm5: gdm still broken, won't start, despite reports of a fix
>
> Hardware:
> -------------
> celeron 1.2 G on genuine intel motherboard
> 2X e100 ethernet
> 40 GB IDE
> 512 MB RAM
>
> Distro:
> -----------
> Red Hat 9 w/ all updates
>
> config attached
>
>
> There is no associated kernel oops, only
> an error message from gdm -
>
> Here is the relevant snippet from syslog:
>
> Jun 5 12:47:47 jyro portsentry: Starting portsentry -audp: succeeded
> Jun 5 12:47:48 jyro kernel: ip_tables: (C) 2000-2002 Netfilter core team
> Jun 5 12:47:48 jyro kernel: ip_conntrack version 2.1 (4086 buckets,
> 32688 max)
> - 324 bytes per conntrack
> Jun 5 12:47:52 jyro gdm[1288]: gdm_slave_xioerror_handler: Fatal X
> error - Rest
> arting :0
> Jun 5 12:47:54 jyro gdm[1295]: gdm_slave_xioerror_handler: Fatal X
> error - Rest
> arting :0
> Jun 5 12:47:58 jyro gdm[1301]: gdm_slave_xioerror_handler: Fatal X
> error - Rest
> arting :0
> Jun 5 12:48:02 jyro gdm[1309]: gdm_slave_xioerror_handler: Fatal X
> error - Rest
> arting :0
> Jun 5 12:48:02 jyro gdm[1242]: deal_with_x_crashes: Running the
> XKeepsCrashing
> script
>

2003-06-05 22:35:52

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.5.70 latest: breaks gnome

Edward Tandi <[email protected]> wrote:
>
> FYI,
>
> I have just tried mm5. I have Gnome2 working (using kdm) but am still
> having the same problems as mm3:

It would be very interesting to know if these things still happen with just
2.5.70 plus

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-mm5/broken-out/linus.patch

> 1) gnome-terminal still only works as root.

Don't know.

> 2) xosview still freezes (reading /proc/*)

We changed the format of /proc/stat and broke xosview. I just tried 1.8.0,
not joy.

> 3) rmmod still not working -"Can't open 'analog': No such file or
> directory"

need more details on this.

> 4) su - <user> returns "operation not permitted". Works as root though
> and thereafter as <user>.

Don't know.

> 5) This is the second time this has happened after switching to 2.5.x;
> My Evolution groups (left-hand icon bar) have gone missing.

Don't know. 2.5 might be triggering latent bugs in evolution. It's
happened before..

> 6) from /var/log/messages: /sbin/mingetty[2583]: /dev/tty4: cannot open
> tty: Inappropriate ioctl for device

Don't know.

> 7) Excessive "anticipatory scheduling elevator" messages allover in
> /var/log/messages.

Will fix sometime.

> 8) from dmesg: process `named' is using obsolete setsockopt SO_BSDCOMPAT

Overly noisy warning. How frequently do they occur?

> I think there is something "not quite right" in the terminal I/O area.

Tracking down the kernel version at which this started to occur would be
good.

2003-06-05 22:42:56

by jjs

[permalink] [raw]
Subject: Re: 2.5.70 latest: breaks gnome

Edward Tandi wrote:

>8) from dmesg: process `named' is using obsolete setsockopt SO_BSDCOMPAT
>
>

If you remove SO_BSDCOMPAT from the include
files and recompile named (just rebuild the srpm)
that will go away -

Best Regards,

Joe

2003-06-05 23:01:43

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.5.70 latest: breaks gnome

Edward Tandi <[email protected]> wrote:
>
> 2) xosview still freezes (reading /proc/*)

OK, here's a quick hack to get xosview-1.8.0 working on 2.5.x kernels.

xosview-1.8.0-akpm/linux/cpumeter.cc | 5 ++++-
xosview-1.8.0-akpm/linux/diskmeter.cc | 2 ++
xosview-1.8.0-akpm/linux/pagemeter.cc | 2 +-
3 files changed, 7 insertions(+), 2 deletions(-)

diff -puN linux/diskmeter.cc~proc-stats-hang-fix linux/diskmeter.cc
--- xosview-1.8.0/linux/diskmeter.cc~proc-stats-hang-fix Thu Jun 5 16:02:34 2003
+++ xosview-1.8.0-akpm/linux/diskmeter.cc Thu Jun 5 16:02:53 2003
@@ -64,6 +64,8 @@ void DiskMeter::getdiskinfo( void )
{
stats.ignore(1024, '\n');
stats >> buf;
+ if (stats.eof())
+ break;
}

// read values
diff -puN linux/cpumeter.cc~proc-stats-hang-fix linux/cpumeter.cc
--- xosview-1.8.0/linux/cpumeter.cc~proc-stats-hang-fix Thu Jun 5 16:07:14 2003
+++ xosview-1.8.0-akpm/linux/cpumeter.cc Thu Jun 5 16:07:42 2003
@@ -58,8 +58,11 @@ void CPUMeter::getcputime( void ){
}

// read until we are at the right line.
- for (int i = 0 ; i < _lineNum ; i++)
+ for (int i = 0 ; i < _lineNum ; i++) {
+ if (stats.eof())
+ break;
stats.getline(tmp, 1024);
+ }

stats >>tmp >>cputime_[cpuindex_][0]
>>cputime_[cpuindex_][1]
diff -puN linux/pagemeter.cc~proc-stats-hang-fix linux/pagemeter.cc
--- xosview-1.8.0/linux/pagemeter.cc~proc-stats-hang-fix Thu Jun 5 16:07:55 2003
+++ xosview-1.8.0-akpm/linux/pagemeter.cc Thu Jun 5 16:08:36 2003
@@ -58,7 +58,7 @@ void PageMeter::getpageinfo( void ){

do {
stats >>buf;
- } while (strncasecmp(buf, "swap", 5));
+ } while (!stats.eof() && strncasecmp(buf, "swap", 5));

stats >>pageinfo_[pageindex_][0] >>pageinfo_[pageindex_][1];


_

2003-06-06 18:34:46

by Edward Tandi

[permalink] [raw]
Subject: Re: 2.5.70 latest: breaks gnome

On Thu, 2003-06-05 at 23:45, Andrew Morton wrote:
> Edward Tandi <[email protected]> wrote:
> >
> > FYI,
> >
> > I have just tried mm5. I have Gnome2 working (using kdm) but am still
> > having the same problems as mm3:
>
> It would be very interesting to know if these things still happen with just
> 2.5.70 plus
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-mm5/broken-out/linus.patch

OK, I've now tried it. Results follow...

> > 1) gnome-terminal still only works as root.
>
> Don't know.

Still only works as root. I do get a message though:

(gnome-terminal:2280): GnomeUI-WARNING **: While connecting to session
manager: Authentication Rejected, reason : None of the authentication
protocols specified are supported and host-based authentication failed.

> > 2) xosview still freezes (reading /proc/*)
>
> We changed the format of /proc/stat and broke xosview. I just tried 1.8.0,
> not joy.

Got patch now :-) no longer an issue.

> > 3) rmmod still not working -"Can't open 'analog': No such file or
> > directory"
>
> need more details on this.

It's from a Mandrake package (if that means anything to you):
Name: module-init-tools
Version: 0.9.9-1mdk

> > 4) su - <user> returns "operation not permitted". Works as root though
> > and thereafter as <user>.
>
> Don't know.

This no longer gives me a problem. Not sure why though.

> > 5) This is the second time this has happened after switching to 2.5.x;
> > My Evolution groups (left-hand icon bar) have gone missing.
>
> Don't know. 2.5 might be triggering latent bugs in evolution. It's
> happened before..

It's just happened again! Looks like it's reproducible.

> > 6) from /var/log/messages: /sbin/mingetty[2583]: /dev/tty4: cannot open
> > tty: Inappropriate ioctl for device
>
> Don't know.

Problem still there.

> > 7) Excessive "anticipatory scheduling elevator" messages allover in
> > /var/log/messages.
>
> Will fix sometime.

OK, happy.

> > 8) from dmesg: process `named' is using obsolete setsockopt SO_BSDCOMPAT
>
> Overly noisy warning. How frequently do they occur?

Not so bad, only 3 times when named starts. I suspect the Linux vendors
will fix it eventually.

> > I think there is something "not quite right" in the terminal I/O area.
>
> Tracking down the kernel version at which this started to occur would be
> good.

It could go back a long way. I've been having this problem from around
2.5.69. Before that I had real problems building. And then building
anything that worked on my hardware.

Ed-T.