Hi,
Since 2.4.22pre2 my Thinkpad R40, Pentium M 1,3Ghz, Debian unstable oops
reproducible during the boot process with ACPI enabled. Short after the
oops it stops.
The last kernel I tested with is 2.4.22pre7.
There was no problem booting with 2.6.0-test1 and ACPI enabled.
****************************************************
ksymoops 2.4.8 on i686 2.4.22-pre7. (without options)
c01a9231
*pde = 00000000
CPU: 0
EFLAGS: 00010046
eax: 00000000 ebx: cfe5ff2C ecx: c0310378 edx: c0310378
esi: 00000008 edi: cfe5ff2c ebp: 00000008 esp: cfe5fed4
ds: 0018 es: 0018 ss: 0018
Process keventd (pid: 2, stackpage=cfe5f000)
Stack: c0310378 00000282 c12c8298 c01bd627 c0310378 c0310378 cfe5ff2c
00000008
ffffffff fffffdff 00000002 c02d3441 c02d32ec c01ccfff 00000282
cfe5ff2c
c12c8280 cfe5ff30 c01d2ade 00000008 cfe5ff2c c12c8298 00000000
00100000
Call Trace: [<c01bd627>] [<c01ccfff>] [<c01d2ade>] [<c01a954c>]
[<c011e3aa>]
[<c012687a>] [<c01266c0>] [<c0105000>] [<c01074ce>] [<c01266c0>]
Code: 0f b6 82 00 00 00 c0 88 03 eb 1e 0f b7 82 00 00 00 c0 66 89
Using defaults from ksymoops -t elf32-i386 -a i386
>>ebx; cfe5ff2c <_end+fac4900/104f2a34>
>>ecx; c0310378 <pm_devs+0/8>
>>edx; c0310378 <pm_devs+0/8>
>>edi; cfe5ff2c <_end+fac4900/104f2a34>
>>esp; cfe5fed4 <_end+fac48a8/104f2a34>
Trace; c01bd627 <acpi_hw_low_level_read+73/11c>
Trace; c01ccfff <acpi_ut_trace+28/2c>
Trace; c01d2ade <acpi_ec_gpe_query+a3/11b>
Trace; c01a954c <acpi_os_execute_deferred+5b/75>
Trace; c011e3aa <__run_task_queue+5a/70>
Trace; c012687a <context_thread+1ba/1c0>
Trace; c01266c0 <context_thread+0/1c0>
Trace; c0105000 <_stext+0/0>
Trace; c01074ce <arch_kernel_thread+2e/40>
Trace; c01266c0 <context_thread+0/1c0>
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 0f b6 82 00 00 00 c0 movzbl 0xc0000000(%edx),%eax
Code; 00000007 Before first symbol
7: 88 03 mov %al,(%ebx)
Code; 00000009 Before first symbol
9: eb 1e jmp 29 <_EIP+0x29>
Code; 0000000b Before first symbol
b: 0f b7 82 00 00 00 c0 movzwl 0xc0000000(%edx),%eax
Code; 00000012 Before first symbol
12: 66 89 00 mov %ax,(%eax)
****************************************************
My ACPI config
#
# ACPI Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_HT_ONLY is not set
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_RELAXED_AML=y
I put the full kernel config file, system map, kernel and the
fake''dmesg'' (used console on parallel port + scanner) on
http://www.gnuenterprise.org/~jan/thinkpad-oops/
Thanks a lot,
Jan
--
Jan Ischebeck <[email protected]>