2003-11-11 18:23:02

by Ramón Rey Vicente

[permalink] [raw]

Subject: [2.6.0-test9-mm2] Error trying to read a cdrom disc

---

ide-cdrom version 4.59-ac1
ide-disk version 1.18

---

Attachments:

via_controller (0.00 B)
ide_drivers (51.00 B)
signature.asc (189.00 B)
Esta parte del mensaje est? firmada digitalmente Download all attachments

2003-11-11 18:24:51

by Ramón Rey Vicente

[permalink] [raw]

Subject: Re: [2.6.0-test9-mm2] Error trying to read a cdrom disc

---

----------VIA BusMastering IDE Configuration----------------
Driver Version: 3.38
South Bridge: VIA vt82c586b
Revision: ISA 0x47 IDE 0x6
Highest DMA rate: UDMA33
BM-DMA base: 0xe000
PCI clock: 33.3MHz
Master Read Cycle IRDY: 1ws
Master Write Cycle IRDY: 1ws
BM IDE Status Register Read Retry: yes
Max DRDY Pulse Width: No limit
-----------------------Primary IDE-------Secondary IDE------
Read DMA FIFO flush: yes yes
End Sector FIFO flush: no no
Prefetch Buffer: yes yes
Post Write Buffer: yes no
Enabled: yes yes
Simplex only: no no
Cable Type: 40w 40w
-------------------drive0----drive1----drive2----drive3-----
Transfer Mode: UDMA UDMA PIO DMA
Address Setup: 30ns 30ns 30ns 30ns
Cmd Active: 90ns 90ns 90ns 90ns
Cmd Recovery: 30ns 30ns 30ns 30ns
Data Active: 90ns 90ns 90ns 90ns
Data Recovery: 30ns 30ns 30ns 30ns
Cycle Time: 60ns 60ns 120ns 120ns
Transfer Rate: 33.3MB/s 33.3MB/s 16.6MB/s 16.6MB/s

---

Attachments:

via_controller_info (1.44 kB)
signature.asc (189.00 B)
Esta parte del mensaje est? firmada digitalmente Download all attachments