I am experiencing sbp2 problems With the current test11. Somehow
it keeps telling me that it has problems logging in to one of my
external sbp2 devices.
ieee1394: sbp2: Error logging into SBP-2 device - login timed-out
This is even after I do a power cycle on the failing device.
I have two IEEE1394 interface in my system. One is a onboard VIA
controller the other one is on a Audigy2 card.
ohci1394: $Rev: 1045 $ Ben Collins <[email protected]>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[feaff800-feafffff] Max
Packet=[2048]
ohci1394_1: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[feaff000-feaff7ff] Max
Packet=[2048]
The SBP2 module only seems to be able to log in to the device connected
to the Audigy2 firewire controller. The kernel is compiled with SMP
enabled.
Jurgen
On Fri, Nov 28, 2003 at 05:23:06PM +0100, Jurgen Kramer wrote:
> I am experiencing sbp2 problems With the current test11. Somehow
> it keeps telling me that it has problems logging in to one of my
> external sbp2 devices.
>
> ieee1394: sbp2: Error logging into SBP-2 device - login timed-out
>
> This is even after I do a power cycle on the failing device.
>
> I have two IEEE1394 interface in my system. One is a onboard VIA
> controller the other one is on a Audigy2 card.
>
> ohci1394: $Rev: 1045 $ Ben Collins <[email protected]>
> ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[feaff800-feafffff] Max
> Packet=[2048]
> ohci1394_1: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[feaff000-feaff7ff] Max
> Packet=[2048]
>
> The SBP2 module only seems to be able to log in to the device connected
> to the Audigy2 firewire controller. The kernel is compiled with SMP
> enabled.
Can you do a ps and show me what the two knodemgrd's look like?
--
Debian - http://www.debian.org/
Linux 1394 - http://www.linux1394.org/
Subversion - http://subversion.tigris.org/
WatchGuard - http://www.watchguard.com/
> Can you do a ps and show me what the two knodemgrd's look like?
Here it goes:
[root@paragon root]# ps -ef|grep knode
root 9891 1 0 20:33 ? 00:00:00 [knodemgrd_0]
root 9892 1 0 20:33 ? 00:00:00 [knodemgrd_1]
Hope that helps. Also included some more dmesg output
ohci1394: $Rev: 1045 $ Ben Collins <[email protected]>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[feaff800-feafffff] Max
Packet=[2048]
ohci1394_1: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[feaff000-feaff7ff] Max
Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800001eea32]
ieee1394: Node added: ID:BUS[0-01:1023] GUID[0030e00050000aa0]
ieee1394: The root node is not cycle master capable; selecting a new
root node and resetting...
ieee1394: Node changed: 0-01:1023 -> 0-00:1023
ieee1394: Node changed: 0-00:1023 -> 0-01:1023
sbp2: $Rev: 1034 $ Ben Collins <[email protected]>
scsi3 : SCSI emulation for IEEE-1394 SBP-2 Devices
ieee1394: sbp2: Error logging into SBP-2 device - login timed-out
ieee1394: Node added: ID:BUS[1-00:1023] GUID[0030e001700104bf]
ieee1394: Host added: ID:BUS[1-02:1023] GUID[00023c00c100cb72]
scsi4 : SCSI emulation for IEEE-1394 SBP-2 Devices
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node 1-00:1023: Max speed [S400] - Max payload [2048]
Vendor: IomintSA Model: MCE3130AP-MO1300 Rev: 0011
Type: Optical Device ANSI SCSI revision: 02
ieee1394: sbp2: Error reconnecting to SBP-2 device - reconnect failed
ieee1394: sbp2: Error logging into SBP-2 device - login failed
ieee1394: sbp2: sbp2_reconnect_device failed!
ieee1394: sbp2: Error logging into SBP-2 device - login timed-out