2004-10-04 09:06:50

by Andrew Morton

[permalink] [raw]
Subject: 2.6.9-rc3-mm2


ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc3/2.6.9-rc3-mm2/


- Hopefully those x86 compile errors are fixed up.

- Various fairly minor updates



Changes since 2.6.9-rc3-mm1:


linus.patch
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-cpufreq.patch
bk-driver-core.patch
bk-i2c.patch
bk-ia64.patch
bk-ide-dev.patch
bk-ieee1394.patch
bk-input.patch
bk-dtor-input.patch
bk-libata.patch
bk-netdev.patch
bk-ntfs.patch
bk-pci.patch
bk-pnp.patch
bk-scsi.patch
bk-scsi-target.patch
bk-usb.patch
bk-watchdog.patch

External bk trees

-therm_adt746x-dont-change-loadavg.patch
-use-kthread_stop-in-therm_adt746x.patch
-kprobes-exception-notifier-fix.patch
-random-preempt-safety.patch
-document-isolcpus=-boot-option.patch
-sparc64-time-interpolator-build-fix.patch
-swsusp-fix-highmem.patch
-x86_64-lindenhurst-msi-build-fix.patch
-cpufreq-ondemand-prevent-various-divide-underflows.patch
-cpufreq-ondemand-account-iowait-as-idle-time.patch
-ppc-time-interpolator-build-fix.patch
-ppc64-squash-childregs-warnings.patch
-ppc64-fix-cross-compilation.patch
-ppc64-eeh-checks-mistakenly-became-no-ops.patch
-jffs2-mount-options-discarded.patch
-vm-no-wild-kswapd.patch
-vm-no-wild-kswapd-fix.patch
-mips-added-cpu-type-checking-to-interrupt-control-routines.patch
-mips-added-interrupt-control-routines-for-vrc4173.patch
m32r-update-ioremap-routine.patch
-m32r-update-comments-for-renesas.patch
-m32r-architecture-upgrade-on-20040928.patch
-m32r-change-to-use-temporary-register-variables.patch
-updated-ixp4xx-mtd-driver-from-cvs-v16.patch
-overcommit-docs-fix.patch
-scsi-docs-fix.patch
-fix-kconfig-for-edd.patch
-fix-up-tty-patch-problem-with-pc300-and-clean-up-braces.patch
-msleep_interruptible-fix-whitespace.patch
-doc-remove-lingering-pc-9800-param.patch
-fix-block-layer-ioctl-bug.patch
-document-drm-ioctl-use.patch
-posix-locks-bug-fix.patch

Merged

+config_pci-off-build-fix.patch
+pci_dev_put-build-fix.patch

bk-pci.patch fixes

+setup_irq-warning-fixes.patch
+uninline-ack_bad_irq.patch
+irq_mis_count-build-fix.patch
+doc-remove-references-to-hardirqc.patch

Fixups for the IRQ rework patches

+ppc64-properly-recognize-powermac73.patch

Powermac fix

+ia64-sched_domains-warning-fixes.patch

Fix warnings in CPU scheduler patches

-sched_domains-make-sd_node_init-per-arch.patch
+sched_domains-make-sd_node_init-per-arch-2.patch

New version

+enable-preempt_bkl-on-smp-too.patch

Make the BKL preemptable on SMP

+sched-add-debug_smp_processor_id.patch

Add a config option for the smp_processor_id() debug check

+vmtrunc-truncate_count-not-atomic.patch
+vmtrunc-restore-unmap_vmas-zap_bytes.patch
+vmtrunc-unmap_mapping_range_tree.patch
+vmtrunc-unmap_mapping-dropping-i_mmap_lock.patch
+vmtrunc-vm_truncate_count-race-caution.patch
+vmtrunc-bug-if-page_mapped.patch

vmtruncate cleanups, fixes and latency reduction

-x86-build-issue-with-software-suspend-code.patch
+swsusp-fix-x86-64-do-not-use-memory-in-copy-loop.patch

New updated patch

+3c59x-make-use-of-generic_mii_ioctl.patch

Use generic MII code in the 3com net driver

+return-einval-on-elevator_store-failure.patch

Fail the write when someone tries to select a not-available I/O scheduler

+fbdev-fix-framebuffer-memory-calculation-for-vesafb.patch

Fix fbdev arithmetic

+conntrack-preempt-safety.patch
+neigh_stat-preempt-fix.patch

Fix some net code which is playing with per-cpu variables with preemption
enabled.

+add-rotate-left-right-ops-to-bitopsh.patch

Bit rotation primitives

+sha512-use-asm-optimized-bit-rotation.patch

Use them in the sha512 crypto code

+copy_thread-unneeded-child_tid-initialization.patch

Avoid a few duplicated initialisations

+drivers-remove-unused-mod_decinc_use_count.patch

Remove more MOD_INC/DEC_USE_COUNT references

+m32r-remove-arch-m32r-drivers-m5.patch
+m32r-remove-arch-m32r-drivers-cs_internalh.patch

Remove dead m32r code

+m68k-mm-off-by-one.patch
+atari-acsi-dependencies.patch
+minmax-removal-arch-m68k-kernel-bios32c.patch
+m68k-dont-emit-empty-stack-program-header-in-vmlinux.patch
+amifb-update-pseudocolor-bitfield-lenghts.patch
+amiga-frame-buffer-kill-obsolete-dmi-resolver-code.patch
+null-vs-0-cleanups.patch
+amifb-use-new-amifboff-logic-to-enhance-audio-experience.patch
+firmware_class-avoid-double-free.patch

m68k stuff

+remove-scsi-ioctl-from-udf-lowlevelc.patch

Remove unneeded code

+boot-parameters-quoting-of-environment-variables.patch

Fix handling of quoted kernel boot parameters

+uml-add-generic-ptrace-requests.patch
+uml-fix-get_user-warning.patch

UML fixlets

+nfsd-insecure-port-warning-shows-decimal-ipv4-address.patch

Print ipv4 addresses more nicely

+aes-586-asm-formatting-changes.patch
+aes-586-asm-small-optimizations.patch

Crypto tweaks

+nx-fix-read_implies_exec-related-noexec-fs-breakage.patch

Fix the mmap-on-cdrom problem

+__iomem-annotations-for-cciss.patch

Fix a few of those new warnings

+add-new-sysfs-attribute-carrier-for-net-devices.patch

Allow net device carrier status to be polled in sysfs

+mips-added-missing-definition-and-fixed-typo.patch

mips build fix

+drivers-atm-ambassador.c-do_pci_device-printk-warning-fix.patch

Fix a warning in this ATM driver




number of patches in -mm: 654
number of changesets in external trees: 579
number of patches in -mm only: 634
total patches: 1213



All 654 patches:


linus.patch

add-wcontinued-support-to-wait4-syscall.patch
add WCONTINUED support to wait4 syscall

parport_pc-superio-chip-fixes.patch
parport_pc superio chip fixes

bk-acpi.patch

acpi-compile-fix.patch
acpi-compile-fix

acpi-x86_64-build-fix.patch
acpi x86_64 build fix

bk-agpgart.patch

bk-alsa.patch

bk-cpufreq.patch

bk-driver-core.patch

bk-i2c.patch

bk-ia64.patch

bk-ide-dev.patch

bk-ieee1394.patch

bk-input.patch

psmouse-build-fix.patch
psmouse build fix

atkbd-warning-fixes.patch
atkbd warning fixes

bk-dtor-input.patch

bk-libata.patch

bk-netdev.patch

ne2k-pci-pci-build-fix.patch
ne2k-pci pci build fix

bk-ntfs.patch

bk-pci.patch

config_pci-off-build-fix.patch
CONFIG_PCI=n build fix

pci_dev_put-build-fix.patch
pci_dev_put() build fix

via-agp-pci-build-fix.patch
via-agp-pci-build-fix

bk-pnp.patch

bk-scsi.patch

bk-scsi-target.patch

qlogic-oops-fix.patch
qlogic oops fix

qlogic-isp2x00-remove-needless-busyloop.patch
QLogic ISP2x00: remove needless busyloop

scsi-qla-not-working-on-latest-mm-sn2.patch
SCSI QLA not working on latest *-mm SN2

qla2xxx-less-posting.patch
qla2xxx: less posting

tmscsim-build-fix.patch
tmscsim-build-fix

bk-usb.patch

bk-watchdog.patch

mm.patch
add -mmN to EXTRAVERSION

fix-smm-failures-on-e750x-systems.patch
fix SMM failures on E750x systems

swsusp-progress-in-percent.patch
swsusp: progress in percent

acpi-proc-simplify-error-handling.patch
acpi proc: error handling

entry-s-cleanups.patch
i386 entry.S cleanups

make-rlimit-settings-per-process-instead-of-per-thread.patch
make rlimit settings per-process instead of per-thread

fix-ptrace_attach-race-with-real-parents-wait-calls-2.patch
fix PTRACE_ATTACH race with real parent's wait calls

softirqs-fix-latency-of-softirq-processing.patch
softirqs: fix latency of softirq processing

softirqs-fix-latency-of-softirq-processing-fix.patch
softirqs-fix-latency-of-softirq-processing fix

x86_64-profiling-oops-workaround.patch
x86_64 profiling oops workaround

add-missing-linux-syscallsh-includes.patch
add missing linux/syscalls.h includes

add-missing-linux-syscallsh-includes-fix.patch
add-missing-linux-syscallsh-includes-fix

distinct-tgid-tid-cpu-usage.patch
distinct tgid/tid CPU usage

show-aggregate-per-process-counters-in-proc-pid-stat-2.patch
show aggregate per-process counters in /proc/PID/stat 2

exec-fix-posix-timers-leak-and-pending-signal-loss.patch
exec: fix posix-timers leak and pending signal loss

__set_page_dirty_nobuffers-mappings.patch
__set_page_dirty_nobuffers mappings

sysfs-backing-store-prepare-file_operations.patch
sysfs backing store - prepare sysfs_file_operations helpers

sysfs-backing-store-prepare-file_operations-fix.patch
fix oops with firmware loading

sysfs-backing-store-add-sysfs_dirent.patch
sysfs backing store - add sysfs_direct structure

sysfs-backing-store-use-sysfs_dirent-tree-in-removal.patch
sysfs backing store: use sysfs_dirent based tree in file removal

sysfs-backing-store-use-sysfs_dirent-tree-in-dir-file_operations.patch
sysfs backing store: use sysfs_dirent based tree in dir file operations

sysfs-backing-store-stop-pinning-dentries-inodes-for-leaves.patch
sysfs backing store: stop pinning dentries/inodes for leaf entries

generic-irq-subsystem-core.patch
generic irq subsystem: core

setup_irq-warning-fixes.patch
setup_irq() warning fixes

generic-irq-subsystem-x86-port.patch
generic irq subsystem: x86 port

uninline-ack_bad_irq.patch
uninline-ack_bad_irq

irq_mis_count-build-fix.patch
irq_mis_count build fix

generic-irq-subsystem-x64-port.patch
generic irq subsystem: x86_64 port

generic-irq-subsystem-ppc-port.patch
generic irq subsystem: ppc port

generic-irq-subsystem-ppc64-port.patch
generic irq subsystem: ppc64 port

doc-remove-references-to-hardirqc.patch
doc: remove references to hardirq.c

fix-of-stack-dump-in-soft-hardirqs.patch
Fix of stack dump in {SOFT|HARD}IRQs

fix-of-stack-dump-in-soft-hardirqs-cleanup.patch
fix-of-stack-dump-in-soft-hardirqs-cleanup

fix-of-stack-dump-in-soft-hardirqs-build-fix.patch
fix-of-stack-dump-in-soft-hardirqs build fix

kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
Fix stack overflow test for non-8k stacks
kgdb-ga.patch fix for i386 single-step into sysenter
fix TRAP_BAD_SYSCALL_EXITS on i386
add TRAP_BAD_SYSCALL_EXITS config for i386

kprobes-exception-notifier-fix-kgdb-i386.patch
kprobes exception notifier fix

kgdb-is-incompatible-with-kprobes.patch
kgdb-is-incompatible-with-kprobes

kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address

kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes

kprobes-exception-notifier-fix-kgdb-x86_64.patch
kprobes exception notifier fix

kgdb-ia64-support.patch
IA64 kgdb support
ia64 kgdb repair and cleanup
ia64 kgdb fix

kgdb-ia64-fixes.patch
kgdb: ia64 fixes

invalidate-page-race-fix.patch
invalidate page race fix

make-tree_lock-an-rwlock.patch
make mapping->tree_lock an rwlock

must-fix.patch
must fix lists update
must fix list update
mustfix update
must-fix update
mustfix lists

ppc64-properly-recognize-powermac73.patch
ppc64: properly recognize PowerMac7,3

ppc64-reloc_hide.patch

invalidate_inodes-speedup.patch
invalidate_inodes speedup
more invalidate_inodes speedup fixes

dev-mem-restriction-patch.patch
/dev/mem restriction patch

dev-mem-restriction-patch-allow-reads.patch
dev-mem-restriction-patch: allow reads

get_user_pages-handle-VM_IO.patch
fix get_user_pages() against mappings of /dev/mem

jbd-remove-livelock-avoidance.patch
JBD: remove livelock avoidance code in journal_dirty_data()

journal_add_journal_head-debug.patch
journal_add_journal_head-debug

list_del-debug.patch
list_del debug check

unplug-can-sleep.patch
unplug functions can sleep

firestream-warnings.patch
firestream warnings

ext3_rsv_cleanup.patch
ext3 block reservation patch set -- ext3 preallocation cleanup

ext3_rsv_base.patch
ext3 block reservation patch set -- ext3 block reservation
ext3 reservations: fix performance regression
ext3 block reservation patch set -- mount and ioctl feature
ext3 block reservation patch set -- dynamically increase reservation window
ext3 reservation ifdef cleanup patch
ext3 reservation max window size check patch
ext3 reservation file ioctl fix

ext3-reservation-default-on.patch
ext3 reservation: default to on

ext3-lazy-discard-reservation-window-patch.patch
ext3 lazy discard reservation window patch
ext3 discard reservation in last iput fix patch
Fix lazy reservation discard
ext3 reservations: bad_inode fix
ext3 reservation discard race fix

ext3-reservations-spelling-fixes.patch
ext3 reservations: Spelling fixes

ext3-reservations-renumber-the-ext3-reservations-ioctls.patch
ext3 reservations: Renumber the ext3 reservations ioctls

ext3-reservations-remove-unneeded-declaration.patch
ext3 reservations: Remove unneeded declaration.

ext3-reservations-turn-ext3-per-sb-reservations-list-into-an-rbtree.patch
ext3 reservations: Turn ext3 per-sb reservations list into an rbtree.

ext3-reservations-split-the-reserve_window-struct-into-two.patch
ext3 reservations: Split the "reserve_window" struct into two

ext3-reservations-smp-protect-the-reservation-during-allocation.patch
ext3 reservations: SMP-protect the reservation during allocation

ext3-rsv-use-before-initialise-fix.patch
ext3 reservations: use before initialised fix

ext3-reservations-window-allocation-fix.patch
ext3 reservations window allocation fix

ext3-reservation-window-size-increase-incorrectly-fix.patch
ext3 reservation window size increase incorrectly fix

perfctr-core.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][1/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: core
CONFIG_PERFCTR=n build fix
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][6/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: misc

perfctr-i386.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][2/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: i386
perfctr #if/#ifdef cleanup
perfctr Dothan support
perfctr x86_tests build fix
perfctr x86 init bug
perfctr: K8 fix for internal benchmarking code
perfctr x86 update

perfctr-prescott-fix.patch
Prescott fix for perfctr

perfctr-x86_64.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][3/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: x86_64

perfctr-ppc.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][4/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: PowerPC
perfctr ppc32 update
perfctr update 4/6: PPC32 cleanups
perfctr ppc32 buglet fix

perfctr-ppc32-mmcr0-handling-fixes.patch
perfctr ppc32 MMCR0 handling fixes

perfctr-virtualised-counters.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][5/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: virtualised counters
perfctr update 6/6: misc minor cleanups
perfctr update 3/6: __user annotations
perfctr-cpus_complement-fix
perfctr cpumask cleanup
perfctr SMP hang fix

virtual-perfctr-illegal-sleep.patch
virtual perfctr illegal sleep

make-perfctr_virtual-default-in-kconfig-match-recommendation.patch
Make PERFCTR_VIRTUAL default in Kconfig match recommendation in help text

perfctr-ifdef-cleanup.patch
perfctr ifdef cleanup

perfctr-update-2-6-kconfig-related-updates.patch
perfctr update 2/6: Kconfig-related updates

perfctr-ppc32-preliminary-interrupt-support.patch
perfctr ppc32 preliminary interrupt support

perfctr-update-5-6-reduce-stack-usage.patch
perfctr update 5/6: reduce stack usage

perfctr-low-level-documentation.patch
perfctr low-level documentation
perfctr documentation update

perfctr-inheritance-1-3-driver-updates.patch
perfctr inheritance 1/3: driver updates
perfctr inheritance illegal sleep bug

perfctr-inheritance-2-3-kernel-updates.patch
perfctr inheritance 2/3: kernel updates

perfctr-inheritance-3-3-documentation-updates.patch
perfctr inheritance 3/3: documentation updates

perfctr-inheritance-locking-fix.patch
perfctr inheritance locking fix

ext3-online-resize-patch.patch
ext3: online resizing
ext3-online-resize-warning-fix

ext3-online-resize-fix-error-codes.patch
ext3 online resize: fix error codes

ext3-online-resize-printk-debug-level.patch
ext3 online resize: printk debug level

ext3-online-resize-fix-bh-leak.patch
ext3 online resize: fix bh leak

ext3-online-resize-use-is_rdonly.patch
ext3 online resize: Use IS_RDONLY()

ext3-online-resize-lock-newly-created-buffers.patch
ext3 online resize: lock newly-created buffers

ext3-online-resize-remove-on-stack-bogus-inode.patch
ext3 online resize: remove on-stack bogus inode

ext3-online-resize-smp-locking-for-group-metadata.patch
ext3 online resize: SMP locking for group metadata

ext3-online-resize-remove-s_debts.patch
ext3 online resize: remove s_debts

ext3-online-resize-remove-on-stack-special-resize-inode.patch
ext3 online resize: remove on-stack special resize inode

ext3-online-resize-make-group-add-asynchronous.patch
ext3 online resize: make group-add asynchronous.

ext3-online-resize-fix-comments.patch
ext3 online resize: fix comments

sched-trivial-sched-changes.patch
sched: trivial sched changes

sched-add-cpu_down_prepare-notifier.patch
sched: add CPU_DOWN_PREPARE notifier

sched-integrate-cpu-hotplug-and-sched-domains.patch
sched: integrate cpu hotplug and sched domains

sched-arch_destroy_sched_domains-warning-fix.patch
sched: arch_destroy_sched_domains warning fix

sched-sched-add-load-balance-flag.patch
sched: sched add load balance flag

sched-sched-add-load-balance-flag-fix.patch
sched: ia64 load balancing fix

sched-remove-disjoint-numa-domains-setup.patch
sched: remove disjoint NUMA domains setup

sched-make-domain-setup-overridable.patch
sched: make domain setup overridable

sched-make-domain-setup-overridable-rename.patch
sched-make-domain-setup-overridable: rename IDLE

sched-make-domain-setup-overridable-fix.patch
sched: make domain setup overridable fix

sched-ia64-add-disjoint-numa-domain-support.patch
sched: IA64 add disjoint NUMA domain support

ia64-non-numa-build-fix.patch
ia64 non numa build fix

ia64-sched_domains-warning-fixes.patch
ia64-sched_domains warning fixes

sched-fix-domain-debug-for-isolcpus.patch
sched: fix domain debug for isolcpus

sched-enable-sd_load_balance.patch
sched: enable SD_LOAD_BALANCE

sched-hotplug-add-a-cpu_down_failed-notifier.patch
sched: hotplug add a CPU_DOWN_FAILED notifier

sched-use-cpu_down_failed-notifier.patch
sched: use CPU_DOWN_FAILED notifier

sched-fixes-for-ia64-domain-setup.patch
sched: fixes for ia64 domain setup

sched-print-preempt-count.patch
sched-print-preempt-count

cpu-scheduler-fix-potential-error-in-runqueue-nr_uninterruptible-count.patch
CPU Scheduler: fix potential error in runqueue nr_uninterruptible count

sched_domains-make-sd_node_init-per-arch-2.patch
sched_domains: Make SD_NODE_INIT per-arch #2

zaphod-scheduler.patch
zaphod CPU scheduler

zaphod-build-fix.patch
zaphod-build-fix

preempt-smp.patch
improve preemption on SMP

preempt-cleanup.patch
preempt cleanup

preempt-cleanup-fix.patch
preempt-cleanup-fix

add-lock_need_resched.patch
add lock_need_resched()

sched-add-cond_resched_softirq.patch
sched: add cond_resched_softirq()

sched-fix-latency-in-random-driver.patch
sched: fix latency in random driver

fix-secure-tcp-sequence-number-generator.patch
fix secure tcp sequence number generator

sched-ext3-fix-scheduling-latencies-in-ext3.patch
sched: ext3: fix scheduling latencies in ext3

break-latency-in-invalidate_list.patch
break latency in invalidate_list()

sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent.patch
sched: vfs: fix scheduling latencies in prune_dcache() and select_parent()

sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent-fix.patch
sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent fix

sched-net-fix-scheduling-latencies-in-netstat.patch
sched: net: fix scheduling latencies in netstat

sched-net-fix-scheduling-latencies-in-__release_sock.patch
sched: net: fix scheduling latencies in __release_sock

sched-mm-fix-scheduling-latencies-in-copy_page_range.patch
sched: mm: fix scheduling latencies in copy_page_range()

fix-config_debug_highmem-assert-in-copy_page_range.patch
fix CONFIG_DEBUG_HIGHMEM assert in copy_page_range()

sched-mm-fix-scheduling-latencies-in-unmap_vmas.patch
sched: mm: fix scheduling latencies in unmap_vmas()

sched-mm-fix-scheduling-latencies-in-get_user_pages.patch
sched: mm: fix scheduling latencies in get_user_pages()

sched-mm-fix-scheduling-latencies-in-filemap_sync.patch
sched: mm: fix scheduling latencies in filemap_sync()

sched-pty-fix-scheduling-latencies-in-ptyc.patch
sched: pty: fix scheduling latencies in pty.c

fix-keventd-execution-dependency.patch
fix keventd execution dependency

sched-fix-scheduling-latencies-in-mttrc.patch
sched: fix scheduling latencies in mttr.c

sched-fix-scheduling-latencies-in-vgaconc.patch
sched: fix scheduling latencies in vgacon.c

sched-fix-scheduling-latencies-for-preempt-kernels.patch
sched: fix scheduling latencies for !PREEMPT kernels

idle-thread-preemption-fix.patch
idle thread preemption fix

remove-the-bkl-by-turning-it-into-a-semaphore.patch
remove the BKL by turning it into a semaphore

enable-preempt_bkl-on-smp-too.patch
enable PREEMPT_BKL on SMP too

sched-add-debug_smp_processor_id.patch
sched: add DEBUG_SMP_PROCESSOR_ID

vmtrunc-truncate_count-not-atomic.patch
vmtrunc: truncate_count not atomic

vmtrunc-restore-unmap_vmas-zap_bytes.patch
vmtrunc: restore unmap_vmas zap_bytes

vmtrunc-unmap_mapping_range_tree.patch
vmtrunc: unmap_mapping_range_tree

vmtrunc-unmap_mapping-dropping-i_mmap_lock.patch
vmtrunc: unmap_mapping dropping i_mmap_lock

vmtrunc-vm_truncate_count-race-caution.patch
vmtrunc: vm_truncate_count race caution

vmtrunc-bug-if-page_mapped.patch
vmtrunc: bug if page_mapped

lockmeter-2.patch
lockmeter: lockmeter for out-of-line-spinlocks
ia64 CONFIG_LOCKMETER fix
lockmeter-build-fix
lockmeter for x86_64

lockmeter-lockmeter-fixes-for-preempt-case.patch
lockmeter: lockmeter fixes for preempt case

lockmeter2-build-fix.patch
lockmeter2-build-fix

lockmeter-in_lock_functions-fix.patch
lockmeter: in_lock_functions() fix

lockmeter-in_lock_functions-fix-2.patch
lockmeter-in_lock_functions-fix-2

lockmeter-build-fix-42.patch
lockmeter-build-fix-42

lockmeter-lockmeter-fix-for-generic_read_trylock.patch
lockmeter: lockmeter fix for generic_read_trylock

ext3_bread-cleanup.patch
ext3_bread() cleanup

pcmcia-implement-driver-model-support.patch
pcmcia: implement driver model support

pcmcia-update-network-drivers.patch
pcmcia: update network drivers

pcmcia-update-wireless-drivers.patch
pcmcia: update wireless drivers

pcmcia-fix-eject-lockup.patch
pcmcia: fix eject lockup

pcmcia-add-hotplug-support.patch
pcmcia: add *hotplug support

linux-2.6.8.1-49-rpc_workqueue.patch
nfs: RPC: Convert rpciod into a work queue for greater flexibility

linux-2.6.8.1-50-rpc_queue_lock.patch
nfs: RPC: Remove the rpc_queue_lock global spinlock

dvdrw-support-for-267-bk13.patch
DVD+RW support for 2.6.7-bk13
packet-writing: add credits
CDRW packet writing support
packet: remove #warning
packet writing: door unlocking fix
pkt_lock_door() warning fix
Fix race in pktcdvd kernel thread handling
Fix open/close races in pktcdvd
packet writing: review fixups
Remove pkt_dev from struct pktcdvd_device
packet writing: convert to seq_file
Packet writing support for DVD-RW and DVD+RW discs.
Get blockdev size right in pktcdvd after switching discs
packet writing documentation
Trivial CDRW packet writing doc update
Control pktcdvd with an auxiliary character device
Subject: Re: 2.6.8-rc2-mm2
control-pktcdvd-with-an-auxiliary-character-device-fix
Simplified request size handling in CDRW packet writing
Fix setting of maximum read speed in CDRW packet writing
Packet writing reporting fixes
Speed up the cdrw packet writing driver
packet writing: avoid BIO hackery
cdrom: buffer sizing fix

packet-writing-credits.patch
packet-writing: add credits

cdrw-packet-writing-support-for-267-bk13.patch
CDRW packet writing support
packet: remove #warning
packet writing: door unlocking fix
pkt_lock_door() warning fix
Fix race in pktcdvd kernel thread handling
Fix open/close races in pktcdvd
packet writing: review fixups
Remove pkt_dev from struct pktcdvd_device
packet writing: convert to seq_file

packet-bio-init.patch
packet-writing: use bio_init()

dvd-rw-packet-writing-update.patch
Packet writing support for DVD-RW and DVD+RW discs.
Get blockdev size right in pktcdvd after switching discs

packet-writing-docco.patch
packet writing documentation
Trivial CDRW packet writing doc update

control-pktcdvd-with-an-auxiliary-character-device.patch
Control pktcdvd with an auxiliary character device
Subject: Re: 2.6.8-rc2-mm2
control-pktcdvd-with-an-auxiliary-character-device-fix

packet-private-data.patch
packet-writing: use gendisk private data

simplified-request-size-handling-in-cdrw-packet-writing.patch
Simplified request size handling in CDRW packet writing

fix-setting-of-maximum-read-speed-in-cdrw-packet-writing.patch
Fix setting of maximum read speed in CDRW packet writing

packet-writing-reporting-fix.patch
Packet writing reporting fixes

speed-up-the-cdrw-packet-writing-driver.patch
Speed up the cdrw packet writing driver

packet-writing-avoid-bio-hackery.patch
packet writing: avoid BIO hackery

packet-open-comment.patch
packet-writing: remove useless search

cdrom-buffer-size-fix.patch
cdrom: buffer sizing fix

cpufreq-driver-for-nforce2-kernel-267.patch
cpufreq driver for nForce2

allow-modular-ide-pnp.patch
allow modular ide-pnp

create-nodemask_t.patch
Create nodemask_t
nodemask fix
nodemask build fix

allow-x86_64-to-reenable-interrupts-on-contention.patch
Allow x86_64 to reenable interrupts on contention

serialize-access-to-ide-devices.patch
serialize access to ide devices

remove-unconditional-pci-acpi-irq-routing.patch
remove unconditional PCI ACPI IRQ routing

propagate-pci_enable_device-errors.patch
propagate pci_enable_device() errors

disable-atykb-warning.patch
disable atykb "too many keys pressed" warning

reiserfs-rename-struct-key.patch
reiserfs-rename-struct-key

add-some-key-management-specific-error-codes.patch
Add some key management specific error codes

keys-new-error-codes-for-alpha-mips-pa-risc-sparc-sparc64.patch
keys: new error codes for Alpha, MIPS, PA-RISC, Sparc & Sparc64

implement-in-kernel-keys-keyring-management.patch
implement in-kernel keys & keyring management
keys build fix
keys & keyring management update patch
implement-in-kernel-keys-keyring-management-update-build-fix
implement-in-kernel-keys-keyring-management-update-build-fix-2
key management patch cleanup

return-a-different-error-if-unavailable-keytype-is-used.patch
Return a different error if unavailable keytype is used

link-user-keyrings-together-correctly.patch
Link user keyrings together correctly

make-key-management-code-use-new-the-error-codes.patch
Make key management code use new the error codes

keys-permission-fix.patch
keys: permission fix

implement-in-kernel-keys-keyring-management-afs-workaround.patch
implement-in-kernel-keys-keyring-management afs workaround

support-supplementary-information-for-request-key.patch
Support supplementary information for request-key

make-key-management-use-syscalls-not-prctls.patch
Make key management use syscalls not prctls

move-syscall-declarations-from-linux-keyh-2.patch
Move syscall declarations from linux/key.h #2

bits-to-make-the-key-management-api-more-usable.patch
Bits to make the key management API more usable

make-key-management-use-syscalls-not-prctls-build-fix.patch
make-key-management-use-syscalls-not-prctls build fix

export-file_ra_state_init-again.patch
Export file_ra_state_init() again

cachefs-filesystem.patch
CacheFS filesystem

cachefs-release-search-records-lest-they-return-to-haunt-us.patch
CacheFS: release search records lest they return to haunt us

fix-64-bit-problems-in-cachefs.patch
Fix 64-bit problems in cachefs

cachefs-fixed-typos-that-cause-wrong-pointer-to-be-kunmapped.patch
cachefs: fixed typos that cause wrong pointer to be kunmapped

cachefs-return-the-right-error-upon-invalid-mount.patch
CacheFS: return the right error upon invalid mount

fix-cachefs-barrier-handling-and-other-kernel-discrepancies.patch
Fix CacheFS barrier handling and other kernel discrepancies

remove-error-from-linux-cachefsh.patch
Remove #error from linux/cachefs.h

cachefs-warning-fix-2.patch
cachefs warning fix 2

cachefs-linkage-fix-2.patch
cachefs linkage fix

cachefs-build-fix.patch
cachefs build fix

cachefs-documentation.patch
CacheFS documentation

add-page-becoming-writable-notification.patch
Add page becoming writable notification

provide-a-filesystem-specific-syncable-page-bit.patch
Provide a filesystem-specific sync'able page bit

provide-a-filesystem-specific-syncable-page-bit-fix.patch
provide-a-filesystem-specific-syncable-page-bit-fix

make-afs-use-cachefs.patch
Make AFS use CacheFS

afs-cachefs-dependency-fix.patch
afs-cachefs-dependency-fix

ide-probe.patch
ide probe

268-rc3-jffs2-unable-to-read-filesystems.patch
jffs2 unable to read filesystems

assign_irq_vector-section-fix.patch
assign_irq_vector __init section fix

find_isa_irq_pin-should-not-be-__init.patch
find_isa_irq_pin should not be __init

kexec-i8259-shutdowni386.patch
kexec: i8259-shutdown.i386

kexec-i8259-shutdown-x86_64.patch
kexec: x86_64 i8259 shutdown

kexec-apic-virtwire-on-shutdowni386patch.patch
kexec: apic-virtwire-on-shutdown.i386.patch

kexec-apic-virtwire-on-shutdownx86_64.patch
kexec: apic-virtwire-on-shutdown.x86_64

kexec-ioapic-virtwire-on-shutdowni386.patch
kexec: ioapic-virtwire-on-shutdown.i386

kexec-ioapic-virtwire-on-shutdownx86_64.patch
kexec: ioapic-virtwire-on-shutdown.x86_64

kexec-e820-64bit.patch
kexec: e820-64bit

kexec-kexec-generic.patch
kexec: kexec-generic

kexec-machine_shutdownx86_64.patch
kexec: machine_shutdown.x86_64

kexec-kexecx86_64.patch
kexec: kexec.x86_64

kexec-machine_shutdowni386.patch
kexec: machine_shutdown.i386

kexec-kexeci386.patch
kexec: kexec.i386

kexec-use_mm.patch
kexec: use_mm

crashdump-documentation.patch
crashdump: documentation

crashdump-memory-preserving-reboot-using-kexec.patch
crashdump: memory preserving reboot using kexec

crashdump-routines-for-copying-dump-pages.patch
crashdump: routines for copying dump pages

crashdump-kmap-build-fix.patch
crashdump kmap build fix

crashdump-register-snapshotting-before-kexec-boot.patch
crashdump: register snapshotting before kexec boot

crashdump-elf-format-dump-file-access.patch
crashdump: ELF format dump file access

crashdump-linear-raw-format-dump-file-access.patch
crashdump: linear/raw format dump file access

new-bitmap-list-format-for-cpusets.patch
new bitmap list format (for cpusets)

cpusets-big-numa-cpu-and-memory-placement.patch
cpusets - big numa cpu and memory placement

cpusets-fix-race-in-cpuset_add_file.patch
cpusets: fix race in cpuset_add_file()

cpusets-remove-more-casts.patch
cpusets: remove more casts

cpusets-make-config_cpusets-the-default-in-sn2_defconfig.patch
cpusets: make CONFIG_CPUSETS the default in sn2_defconfig

cpusets-document-proc-status-allowed-fields.patch
cpusets: document proc status allowed fields

cpusets-dont-export-proc_cpuset_operations.patch
Cpusets - Dont export proc_cpuset_operations

cpusets-display-allowed-masks-in-proc-status.patch
cpusets: display allowed masks in proc status

cpusets-simplify-cpus_allowed-setting-in-attach.patch
cpusets: simplify cpus_allowed setting in attach

cpusets-remove-useless-validation-check.patch
cpusets: remove useless validation check

cpusets-config_cpusets-depends-on-smp.patch
Cpusets: CONFIG_CPUSETS depends on SMP

cpusets-tasks-file-simplify-format-fixes.patch
Cpusets tasks file: simplify format, fixes

cpusets-simplify-memory-generation.patch
Cpusets: simplify memory generation

cpusets-interoperate-with-hotplug-online-maps.patch
cpusets: interoperate with hotplug online maps

cpusets-alternative-fix-for-possible-race-in.patch
cpusets: alternative fix for possible race in cpuset_tasks_read()

cpusets-remove-casts.patch
cpusets: remove void* typecasts

reiser4-sb_sync_inodes.patch
reiser4: vfs: add super_operations.sync_inodes()

reiser4-sb_sync_inodes-cleanup.patch
reiser4-sb_sync_inodes-cleanup

reiser4-allow-drop_inode-implementation.patch
reiser4: export vfs inode.c symbols

reiser4-allow-drop_inode-implementation-cleanup.patch
reiser4-allow-drop_inode-implementation-cleanup

reiser4-truncate_inode_pages_range.patch
reiser4: vfs: add truncate_inode_pages_range()

reiser4-truncate_inode_pages_range-cleanup.patch
reiser4-truncate_inode_pages_range-cleanup

reiser4-export-remove_from_page_cache.patch
reiser4: export pagecache add/remove functions to modules

reiser4-export-page_cache_readahead.patch
reiser4: export page_cache_readahead to modules

reiser4-reget-page-mapping.patch
reiser4: vfs: re-check page->mapping after calling try_to_release_page()

reiser4-rcu-barrier.patch
reiser4: add rcu_barrier() synchronization point

reiser4-rcu-barrier-fix.patch
reiser4-rcu-barrier fix

reiser4-export-inode_lock.patch
reiser4: export inode_lock to modules

reiser4-export-inode_lock-cleanup.patch
reiser4-export-inode_lock-cleanup

reiser4-export-pagevec-funcs.patch
reiser4: export pagevec functions to modules

reiser4-export-pagevec-funcs-cleanup.patch
reiser4-export-pagevec-funcs-cleanup

reiser4-export-radix_tree_preload.patch
reiser4: export radix_tree_preload() to modules

reiser4-radix-tree-tag.patch
reiser4: add new radix tree tag

reiser4-radix_tree_lookup_slot.patch
reiser4: add radix_tree_lookup_slot()

reiser4-aliased-dir.patch
reiser4: vfs: handle aliased directories

reiser4-kobject-umount-race.patch
reiser4: introduce filesystem kobjects

reiser4-kobject-umount-race-cleanup.patch
reiser4-kobject-umount-race-cleanup

reiser4-perthread-pages.patch
reiser4: per-thread page pools

reiser4-unstatic-kswapd.patch
reiser4: make kswapd() unstatic for debug

reiser4-include-reiser4.patch
reiser4: add to build system

reiser4-4kstacks-fix.patch
resier4-4kstacks-fix

stop-reiser4-from-turning-itself-on-by-default.patch
Stop reiser4 from turning itself on by default

reiser4-doc.patch
reiser4: documentation

reiser4-doc-update.patch
Update Documentation/Changes for reiser4

reiser4-only.patch
reiser4: main fs

reiser4-cond_resched-build-fix.patch
reiser4: cond_resched() build fix

reiser4-debug-build-fix.patch
reiser4-debug-build-fix

reiser4-prefetch-warning-fix.patch
reiser4: prefetch warning fix

reiser4-mode-fix.patch
reiser4: mode type fix

reiser4-get_context_ok-warning-fixes.patch
reiser4: get_context_ok() warning fixes

reiser4-remove-debug.patch
resier4: remove debug stuff

reiser4-spinlock-debugging-build-fix-2.patch
reiser4-spinlock-debugging-build-fix-2

reiser4-sparc64-build-fix.patch
reiser4 sparc64 build fix

sys_reiser4-sparc64-build-fix.patch
sys_reiser4 sparc64 build fix

reiser4-printk-warning-fixes.patch
reiser4 printk warning fixes

reiser4-generic_acl-fix.patch
reiser4: generic_acl fix

reiser4-plugin_set_done-memleak-fix.patch
reiser4 plugin_set_done-memleak-fix.patch

reiser4-init-max_atom_flusers.patch
reiser4 init-max_atom_flusers.patch

reiser4-parse-options-reduce-stack-usage.patch
reiser4 parse-options-reduce-stack-usage.patch

reiser4-sparce64-warning-fix.patch
reiser4 sparc64-warning-fix.patch

reiser4-hardirq-build-fix.patch
resiser4: hardirq.h build fix

reiser4-x86_64-warning-fix.patch
reiser4 x86_64-warning-fix.patch

reiser4-fix-mount-option-parsing.patch
reiser4 fix-mount-option-parsing.patch

reiser4-parse-option-cleanup.patch
reiser4 parse-option-cleanup.patch

reiser4-comment-fix.patch
reiser4 comment-fix.patch

reiser4-fill_super-improve-warning.patch
reiser4 fill_super-improve-warning.patch

reiser4-disable-pseudo.patch
reiser4 disable-pseudo.patch

reiser4-disable-repacker.patch
reiser4 disable-repacker.patch

add-acpi-based-floppy-controller-enumeration.patch
Add ACPI-based floppy controller enumeration.

add-acpi-based-floppy-controller-enumeration-fix.patch
add-acpi-based-floppy-controller-enumeration fix

update-acpi-floppy-enumeration.patch
update ACPI floppy enumeration

floppy-acpi-enumeration-update.patch
floppy ACPI enumeration update

possible-dcache-bug-debugging-patch.patch
Possible dcache BUG: debugging patch

kallsyms-data-size-reduction--lookup-speedup.patch
kallsyms data size reduction / lookup speedup

tioccons-security.patch
TIOCCONS security

fix-process-start-times.patch
Fix reporting of process start times

fix-comment-in-include-linux-nodemaskh.patch
Fix comment in include/linux/nodemask.h

move-waitqueue-functions-to-kernel-waitc.patch
move waitqueue functions to kernel/wait.c

standardize-bit-waiting-data-type.patch
standardize bit waiting data type

provide-a-filesystem-specific-syncable-page-bit-fix-2.patch
provide-a-filesystem-specific-syncable-page-bit-fix-2

consolidate-bit-waiting-code-patterns.patch
consolidate bit waiting code patterns
consolidate-bit-waiting-code-patterns-cleanup
__wait_on_bit-fix

eliminate-bh-waitqueue-hashtable.patch
eliminate bh waitqueue hashtable

eliminate-bh-waitqueue-hashtable-fix.patch
wait_on_bit_lock() must test_and_set_bit(), not test_bit()

eliminate-inode-waitqueue-hashtable.patch
eliminate inode waitqueue hashtable

move-wait-ops-contention-case-completely-out-of-line.patch
move wait ops' contention case completely out of line

reduce-number-of-parameters-to-__wait_on_bit-and-__wait_on_bit_lock.patch
reduce number of parameters to __wait_on_bit() and __wait_on_bit_lock()

wait_on_bit-must-loop.patch
wait_on_bit() must loop

document-wake_up_bits-requirement-for-preceding-memory-barriers.patch
document wake_up_bit()'s requirement for preceding memory barriers

jbd-wakeup-fix.patch
jbd wakeup fix

3c59x-pm-fix.patch
3c59x: enable power management unconditionally

3c59x-missing-pci_disable_device.patch
3c59x: missing pci_disable_device

3c59x-use-netdev_priv.patch
3c59x: use netdev_priv

3c59x-make-use-of-generic_mii_ioctl.patch
3c59x: Make use of generic_mii_ioctl

serial-mpsc-driver.patch
Serial MPSC driver

serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
serial: add support for non-standard XTALs to 16c950 driver

serial-pick-nearest-baud-rate-divider.patch
serial: pick nearest baud rate divider

add-support-for-possio-gcc-aka-pcmcia-siemens-mc45.patch
Add support for Possio GCC AKA PCMCIA Siemens MC45

vm-pageout-throttling.patch
vm: pageout throttling

fix-race-in-sysfs_read_file-and-sysfs_write_file.patch
Fix race in sysfs_read_file() and sysfs_write_file()

possible-race-in-sysfs_read_file-and-sysfs_write_file-update.patch
Possible race in sysfs_read_file() and sysfs_write_file()

md-add-interface-for-userspace-monitoring-of-events.patch
md: add interface for userspace monitoring of events.

unreachable-code-in-ext3_direct_io.patch
unreachable code in ext3_direct_IO()

fix-for-nforce2-secondary-ide-getting-wrong-irq.patch
Fix for NForce2 secondary IDE getting wrong IRQ

revert-allow-oem-written-modules-to-make-calls-to-ia64-oem-sal-functions.patch
revert "allow OEM written modules to make calls to ia64 OEM SAL functions"

switchable-and-modular-io-schedulers.patch
switchable and modular io schedulers

return-einval-on-elevator_store-failure.patch
return -EINVAL on elevator_store failure

switchable-and-modular-io-schedulers-fix.patch
bad while termination on modular scheduler patch

switchable-and-modular-io-schedulers-hack-fix.patch
switchable-and-modular-io-schedulers hack fix

update-cfq-v2-scheduler-patch.patch
cfq-v2 I/O scheduler update

cfq-v2-pin-cfq_data-from-io_context.patch
cfq-v2 pin cfq_data from io_context

dont-export-blkdev_open-and-def_blk_ops.patch
don't export blkdev_open and def_blk_ops

remove-dead-code-from-fs-mbcachec.patch
remove dead code from fs/mbcache.c

remove-posix_acl_masq_nfs_mode.patch
remove posix_acl_masq_nfs_mode

dont-export-shmem_file_setup.patch
don't export shmem_file_setup

remove-pm_find-unexport-pm_send.patch
remove pm_find, unexport pm_send

remove-dead-code-and-exports-from-signalc.patch
remove dead code and exports from signal.c

unexport-proc_sys_root.patch
unexport proc_sys_root

unexport-is_subdir-and-shrink_dcache_anon.patch
unexport is_subdir and shrink_dcache_anon

unexport-devfs_mk_symlink.patch
unexport devfs_mk_symlink

unexport-do_execve-do_select.patch
unexport do_execve/do_select

unexport-exit_mm.patch
unexport exit_mm

unexport-files_lock-and-put_filp.patch
unexport files_lock and put_filp

unexport-f_delown.patch
unexport f_delown

unexport-lookup_create.patch
unexport lookup_create

remove-wake_up_all_sync.patch
remove wake_up_all_sync

remove-set_fs_root-set_fs_pwd.patch
remove set_fs_root/set_fs_pwd

md-remove-md_flush_all.patch
md: remove md_flush_all

md-make-retry_list-non-global-in-raid1-and-multipath.patch
md: make retry_list non-global in raid1 and multipath

md-rationalise-issue_flush-function-in-md-personalities.patch
md: rationalise issue_flush function in md personalities

md-rationalise-unplug-functions-in-md.patch
md: rationalise unplug functions in md

md-make-sure-md-always-uses-rdev_dec_pending-properly.patch
md: make sure md always uses rdev_dec_pending properly

md-fix-two-little-bugs-in-raid10.patch
md: fix two little bugs in raid10

md-modify-locking-when-accessing-subdevices-in-md.patch
md: modify locking when accessing subdevices in md

generic-acl-support-for-permission.patch
generic acl support for ->permission

generic-acl-support-for-permission-fix.patch
generic acl support for ->permission fix

cacheline-align-pagevec-structure.patch
Adjust align pagevec structure

fbdev-remove-unnecessary-banshee_wait_idle-from-tdfxfb.patch
fbdev: remove unnecessary banshee_wait_idle from tdfxfb

fbdev-fix-logo-drawing-failure-for-vga16fb.patch
fbdev: fix logo drawing failure for vga16fb

fbcon-fix-setup-boot-options-of-fbcon.patch
fbcon: Fix setup boot options of fbcon

fbdev-pass-struct-device-to-class_simple_device_add.patch
fbdev: Pass struct device to class_simple_device_add

fbdev-add-tile-blitting-support.patch
fbdev: Add Tile Blitting support

fbdev-fix-scrolling-corruption.patch
fbdev: fix scrolling corruption

radeonfb-fix-warnings-about-uninitialized-variables.patch
radeonfb: Fix monitor probe logic

fbdev-remove-i810fb-explicit-agp-initialization-hack.patch
fbdev: Remove i810fb explicit agp initialization hack.

fbdev-add-iomem-annotations-to-fbmemc.patch
fbdev: Add iomem annotations to fbmem.c

fbdev-add-iomem-annotations-to-i810fb.patch
fbdev: Add iomem annotations to i810fb

fbdev-add-iomem-annotations-to-vga16fbc.patch
fbdev: Add iomem annotations to vga16fb.c

vga-console-font-problems-on-26-kernel.patch
VGA console font problems on 2.6 kernel

fbcon-unimap-fix.patch
fbcon unimap fix

edid_info-in-zero-page.patch
Fix EDID_INFO in zero-page

fbdev-fix-framebuffer-memory-calculation-for-vesafb.patch
fbdev: fix framebuffer memory calculation for vesafb

fix-for-spurious-interrupts-on-e100-resume-2.patch
Fix for spurious interrupts on e100 resume 2

i-o-space-write-barrier.patch
I/O space write barrier

atomic_inc_return-for-i386.patch
atomic_inc_return() for i386

atomic_inc_return-for-x86_64.patch
atomic_inc_return() for x86_64

atomic_inc_return-for-arm.patch
atomic_inc_return() for arm

atomic_inc_return-for-arm26.patch
atomic_inc_return() for arm26

atomic_inc_return-for-sparc64.patch
atomic_inc_return() for sparc64

remove-dead-exports-from-fs-fat.patch
remove dead exports from fs/fat/

fat-use-hlist_head-for-fat_inode_hashtable-1-6.patch
FAT: use hlist_head for fat_inode_hashtable

fat-rewrite-the-cache-for-file-allocation-table-lookup.patch
FAT: rewrite the cache for file allocation table lookup

fat-cache-lock-from-per-sb-to-per-inode-3-6.patch
FAT: cache lock from per sb to per inode

fat-the-inode-hash-from-per-module-to-per-sb-4-6.patch
FAT: the inode hash from per module to per sb

fat-fix-the-race-bitween-fat_free-and-fat_get_cluster.patch
FAT: Fix the race bitween fat_free() and fat_get_cluster()

fat-remove-debug_pr-6-6.patch
FAT: remove debug_pr()

fat-merge-fix.patch
Subject: [PATCH 1/4] FAT: merge fix

fat-check-free_clusters-value.patch
Subject: [PATCH 2/4] FAT: check free_clusters value

fat-removal-of-c_le_-macro.patch
Subject: [PATCH 3/4] FAT: removal of C[FT]_LE_[WL] macro

fat-remove-validity-check-of-fat-first-entry.patch
Subject: [PATCH 4/4] FAT: remove validity check of FAT first entry

thinkpad-fnfx-key-driver.patch
thinkpad fn+fx key driver

enforce-a-gap-between-heap-and-stack.patch
Enforce a gap between heap and stack

no-exec-i386-and-x86_64-fixes.patch
no exec: i386 and x86_64 cleanups

rewrite-alloc_pidmap.patch
pidhashing: rewrite alloc_pidmap()

pidhashing-retain-older-vendor-copyright.patch
From: William Lee Irwin III <[email protected]>
Subject: [pidhashing] [1/3] retain older vendor copyright

pidhashing-lower-pid_max_limit-for-32-bit-machines.patch
From: William Lee Irwin III <[email protected]>
Subject: [pidhashing] [2/3] lower PID_MAX_LIMIT for 32-bit machines

pidhashing-enforce-pid_max_limit-in-sysctls.patch
From: William Lee Irwin III <[email protected]>
Subject: [pidhashing] [3/3] enforce PID_MAX_LIMIT in sysctls

allow-multiple-inputs-in-alternative_input.patch
Allow multiple inputs in alternative_input

autofs4-allow-map-update-recognition.patch
autofs4: allow map update recognition

lighten-mmlist_lock.patch
lighten mmlist_lock

incorrect-pci-interrupt-assignment-on-es7000-for-platform-gsi.patch
Incorrect PCI interrupt assignment on ES7000 for platform GSI

fix-task_mmuc-text-size-reporting.patch
procfs: fix task_mmu.c text size reporting

sparc32-add-atomic_sub_and_test.patch
sparc32: add atomic_sub_and_test()

make-console_conditional_schedule-__sched-and-use-cond_resched.patch
make console_conditional_schedule() __sched and use cond_resched()

report-per-process-pagetable-usage.patch
report per-process pagetable usage

remove-lock_section-from-x86_64-spin_lock-asm.patch
remove LOCK_SECTION from x86_64 spin_lock asm

v4l-msp3400-cleanup.patch
v4l: msp3400 cleanup

v4l-tuner-update.patch
v4l: tuner update

v4l-bttv-update.patch
v4l: bttv update

v4l-dvb-cx88-driver-update.patch
v4l/dvb: cx88 driver update

v4l-dvb-cx88-driver-update-fix.patch
v4l-dvb-cx88-driver-update-fix

DVB-update-saa7146.patch
DVB: update saa7146

DVB-documentation-update.patch
DVB: documentation update

DVB-skystar2-dvb-bt8xx-update.patch
DVB: skystar2 dvb bt8xx update

DVB-dvb-core-update.patch
DVB: core update

DVB-frontend-conversion.patch
DVB: frontend conversion

DVB-frontend-conversion2.patch
DVB: frontend conversion #2

DVB-frontend-conversion3.patch
DVB: frontend conversion #3

DVB-frontend-conversion4.patch
DVB: frontend conversion #4

DVB-add-frontend-1-2.patch
DVB: add frontend

DVB-add-frontend-2-2.patch
DVB: add frontend #2

DVB-new-driver-dibusb.patch
DVB: new driver for mobile USB Budget DVB-T devices

DVB-misc-driver-updates.patch
DVB: misc driver updates

DVB-frontend-updates.patch
DVB: frontend updates

V4L-follow-changes-in-saa7146.patch
V4L: follow changes in saa7146

a-simple-fifo-implementation.patch
A simple FIFO implementation

add-hook-for-pci-resource-deallocation-2.patch
add hook for PCI resource deallocation

replace-hard-coded-modverdir-in-modpost.patch
Replace hard-coded MODVERDIR in modpost

gen_init_cpio-uses-external-file-list.patch
gen_init_cpio uses external file list

select-cpio_list-or-source-directory-for-initramfs-image.patch
Select cpio_list or source directory for initramfs image

select-cpio_list-or-source-directory-for-initramfs-image-fix.patch
select-cpio_list-or-source-directory-for-initramfs-image fix

ia64-alignment-error-stack-dump.patch
ia64-alignment-error-stack-dump

changed-pci_find_device-to-pci_get_device.patch
Changed pci_find_device to pci_get_device

remove-mod_inc_use_count-mod_dec_use_count.patch
remove MOD_INC_USE_COUNT/MOD_DEC_USE_COUNT

mark-inter_module_-deprecated.patch
mark inter_module_* deprecated

dont-include-linux-sysctlh-in-linux-securityh.patch
don't include <linux/sysctl.h> in <linux/security.h>

cleanup-move-call-to-update_process_times.patch
cleanup: move call to update_process_times.

cleanup-remove-unused-definitions-from-timexh.patch
cleanup: remove unused definitions from timex.h

cleanup-timeh-timesh-timexh-and-jiffiesh.patch
cleanup: time.h, times.h, timex.h and jiffies.h

fix-dcache-lookup.patch
Fix dcache lookup

remove-d_bucket.patch
Remove d_bucket

remove-d_bucket-warning-fix.patch
remove-d_bucket warning fix

document-rcu-based-dcache-lookup.patch
Document RCU based dcache lookup

via82xx-fix.patch
via82xx fix

add-tainted-bit-for-machine-checks.patch
Add tainted bit for machine checks

taint-cleanup-mce.patch
taint: cleanup mce

taint-fix-forced-rmmod.patch
taint: fix forced rmmod

taint-on-bad_page.patch
taint on bad_page

smbfs-do-not-honor-uid-gid-file_mode-and-dir_mode-supplied.patch
smbfs does not honor uid, gid, file_mode and dir_mode supplied by user mount

sort-generic-pci-fixups-after-specific-ones.patch
Sort generic PCI fixups after specific ones

kfree_skb-dump_stack.patch
kfree_skb-dump_stack

simplify-last-lib-idrc-change.patch
Simplify last lib/idr.c change

fix-typesh.patch
Fix types.h

xattr-consolidation-v3-generic-xattr-api.patch
xattr consolidation v3 - generic xattr API

xattr-consolidation-v3-lsm.patch
xattr consolidation v3 - LSM

xattr-consolidation-v3-ext3.patch
xattr consolidation v3 - ext3

xattr-consolidation-v3-ext2.patch
xattr consolidation v3 - ext2

xattr-consolidation-v3-devpts.patch
xattr consolidation v3 - devpts

xattr-consolidation-v3-tmpfs.patch
xattr consolidation v3 - tmpfs

xattr-consolidation-v3-tmpfs-fix.patch
xattr-consolidation-v3-tmpfs fix

xattr-reintroduce-sanity-checks-2.patch
xattr: re-introduce validity check before xattr cache insert

allow-all-filesystems-to-specify-fscreate-mount.patch
SELinux: allow all filesystems to specify fscreate mount option

512x-altix-timer-interrupt-livelock-fix-vs-269-rc2-mm2.patch
profile: 512x Altix timer interrupt livelock fix

sparc32-early-tick_ops.patch
sparc32: early tick_ops

smc91x-revert-11923358-m32r-modify-drivers-net-smc91xc.patch
smc91x: Revert 1.1923.3.58: "m32r: modify drivers/net/smc91x.c for m32r"

smc91x-assorted-minor-cleanups.patch
From: Nicolas Pitre <[email protected]>
Subject: [Patch 2/11] smc91x: Assorted minor cleanups

smc91x-set-the-mac-addr-from-the-smc_enable-function.patch
From: Nicolas Pitre <[email protected]>
Subject: [Patch 3/11] smc91x: set the MAC addr from the smc_enable function

smc91x-fold-smc_setmulticast-into-smc_set_multicast_list.patch
From: Nicolas Pitre <[email protected]>
Subject: [Patch 4/11] smc91x: fold smc_setmulticast() into smc_set_multicast_list()

smc91x-simplify-register-bank-usage.patch
From: Nicolas Pitre <[email protected]>
Subject: [Patch 5/11] smc91x: simplify register bank usage

smc91x-move-tx-processing-out-of-irq-context-entirely.patch
From: Nicolas Pitre <[email protected]>
Subject: [Patch 6/11] smc91x: move TX processing out of IRQ context entirely

smc91x-use-a-work-queue-to-reconfigure-the-phy-from.patch
From: Nicolas Pitre <[email protected]>
Subject: [Patch 7/11] smc91x: use a work queue to reconfigure the phy from smc_timeout()

smc91x-fix-possible-leak-of-the-skb-waiting-for-mem.patch
From: Nicolas Pitre <[email protected]>
Subject: [Patch 8/11] smc91x: fix possible leak of the skb waiting for mem allocation

smc91x-display-pertinent-register-values-from-the.patch
From: Nicolas Pitre <[email protected]>
Subject: [Patch 9/11] smc91x: display pertinent register values from the timeout function

smc91x-straighten-smp-locking.patch
From: Nicolas Pitre <[email protected]>
Subject: [Patch 10/11] smc91x: straighten SMP locking

smc91x-cosmetics.patch
From: Nicolas Pitre <[email protected]>
Subject: [Patch 11/11] smc91x: cosmetics

m32r-trivial-fix-of-smc91xh.patch
m32r: trivial fix of smc91x.h

smc91x-fix-smp-lock-usage.patch
smc91x: fix SMP lock usage

smc91x-more-smp-locking-fixes.patch
smc91x: more SMP locking fixes

smc91x-fix-compilation-with-dma-on-pxa2xx.patch
smc91x: fix compilation with DMA on PXA2xx

remove-big-endian-mode-from-matroxfb.patch
Remove big-endian mode from matroxfb

assorted-matroxfb-fixes.patch
Assorted matroxfb fixes

janitor-cpqarray-remove-unused-include.patch
janitor: cpqarray remove unused include

janitor-remove-old-ifdefs-dmascc.patch
janitor: remove old ifdefs dmascc

janitor-remove-old-ifdefs-fasttimer.patch
janitor: remove old ifdefs fasttimer

janitor-list_for_each-drivers-char-drm-radeon_memc.patch
janitor: list_for_each: drivers-char-drm-radeon_mem.c

janitor-char-rio_linux-replace-schedule_timeout-with-msleep-msleep_interruptible.patch
janitor: char/rio_linux: replace schedule_timeout() with msleep()/msleep_interruptible()

janitor-char-sis-agp-replace-schedule_timeout-with-msleep.patch
janitor: char/sis-agp: replace schedule_timeout() with msleep()

janitor-char-fdc-io-replace-direct-assignment-with-set_current_state.patch
janitor: char/fdc-io: replace direct assignment with set_current_state()

janitor-char-ipmi_si_intf-add-set_current_state.patch
janitor: char/ipmi_si_intf: add set_current_state()

janitor-char-sx-replace-direct-assignment-with-set_current_state.patch
janitor: char/sx: replace direct assignment with set_current_state()

drivers-char-replace-schedule_timeout-with-msleep_interruptible.patch
drivers/char: replace schedule_timeout() with msleep_interruptible()

janitor-removing-check_region-from-drivers-char-espc.patch

janitor-mark-__init-__exit-static-drivers-net-ppp_deflate.patch
janitor: mark __init/__exit static drivers/net/ppp_deflate

janitor-mark-__init-__exit-static-drivers-net-bsd_comp.patch
janitor: mark __init/__exit static drivers/net/bsd_comp

janitor-fix-typo-arm-dma-arch-arm26-machine-dmac.patch
janitor: fix-typo-arm-dma arch/arm26/machine/dma.c

kill-kernel_version-duplicate-in-videocodecc.patch
janitor: kill KERNEL_VERSION duplicate in videocodec.c

video-radeon_base-replace-ms_to_hz-with-msecs_to_jiffies.patch
janitor: video/radeon_base: replace MS_TO_HZ() with msecs_to_jiffies()

video-radeonfb-remove-ms_to_hz.patch
janitor: video/radeonfb: remove MS_TO_HZ()

drivers-media-replace-schedule_timeout-with-msleep.patch
janitor: drivers/media: replace schedule_timeout() with msleep()

drivers-message-replace-schedule_timeout-with-msleep_interruptible.patch
janitor: drivers/message: replace schedule_timeout() with msleep_interruptible()

drivers-md-replace-schedule_timeout-with-msleep_interruptible.patch
drivers/md: replace schedule_timeout() with msleep_interruptible()

drivers-ieee1394-replace-schedule_timeout-with-msleep_interruptible.patch
ieee1394: replace schedule_timeout() with msleep_interruptible()

janitor-replace-dprintk-with-pr_debug-in-drivers-scsi-tpam.patch
janitor: replace dprintk with pr_debug in drivers/scsi/tpam/

janitor-isdn-icn-change-units-of-icn_boot_timeout1.patch
janitor: isdn/icn: change units of ICN_BOOT_TIMEOUT1

drivers-isdn-replace-milliseconds-with-msecs_to_jiffies.patch
drivers/isdn: replace milliseconds() with msecs_to_jiffies()

__function__-string-concatenation-deprecated.patch
janitor: __FUNCTION__ string concatenation deprecated

janitor-replace-dprintk-with-pr_debug-in-microcodec.patch
janitor: replace dprintk with pr_debug in microcode.c

janitor-net-mac89x0-replace-schedule_timeout-with-msleep_interruptible.patch
net/mac89x0: replace schedule_timeout() with msleep_interruptible()

nfsd4-fix-nfsd-oopsed-when-encountering-a-conflict-with-a-local-lock.patch
nfsd4: nfsd oopsed when encountering a conflict with a local lock

nfsd-separate-a-little-of-logic-from-fh_verify-into-new-function.patch
nfsd: separate a little of logic from fh_verify into new function

nfsd4-dont-take-i_sem-around-call-to-getxattr.patch
nfsd4: don't take i_sem around call to ->getxattr

nfsd-make-sure-getxattr-inode-op-is-non-null-before-calling-it.patch
nfsd: make sure getxattr inode op is non-NULL before calling it

nfsd4-reference-count-stateowners.patch
nfsd4: reference count stateowners

nfsd4-take-a-reference-to-preserve-stateowner-through-xdr-replay-code.patch
nfsd4: take a reference to preserve stateowner through xdr replay code

nfsd4-revert-awkward-extension-of-state-lock-over-xdr-for-replay-encoding.patch
nfsd4: revert awkward extension of state lock over xdr for replay encoding

nfsd4-fix-race-in-xdr-encoding-of-lock_denied-response.patch
nfsd4: fix race in xdr encoding of lock_denied response.

nfsd-remove-incorrect-stateid-modification-in-nfsv4-open-upgrade.patch
nfsd: remove incorrect stateid modification in nfsv4 open upgrade

nfsd4-move-open-owner-checks-from-nfsd4_process_open2-into-new-function.patch
nfsd4: move open owner checks from nfsd4_process_open2 into new function

nfsd4-set-open_result_locktype_posix-in-open.patch
nfsd: set OPEN_RESULT_LOCKTYPE_POSIX in open()

nfsd4-move-seqid-decrement-on-reclaim-to-separate-function.patch
nfsd4: move seqid decrement on reclaim to separate function

nfsd4-reorganize-if-in-nfsd4_process_open2-to-make-test-clearer.patch
nfsd4: reorganize "if" in nfsd4_process_open2 to make test clearer

nfsd4-move-open_upgrade-code-into-a-separate-function.patch
nfsd4: move open_upgrade code into a separate function

nfsd4-move-some-nfsd4_process_open2-code-to-nfs4_new_open.patch
nfsd4: move some nfsd4_process_open2 code to nfs4_new_open

nfsd-clean-up-nfsd4_process_open2.patch
nfsd: clean up nfsd4_process_open2

nfsd4-fix-putrootfh-return.patch
nfsd4: fix putrootfh return

nfsd4-move-code-to-truncate-on-open-to-separate-function.patch
nfsd4: move code to truncate on open to separate function

rmmod-ohci1394-hangs.patch
rmmod ohci1394 hangs

capabilities-issue-in-firmware-loader.patch
Capabilities issue in firmware loader

introduce-remap_pfn_range-to-replace-remap_page_range.patch
vm: introduce remap_pfn_range() to replace remap_page_range()

convert-references-to-remap_page_range-under-arch-and-documentation-to-remap_pfn_range.patch
vm: convert references to remap_page_range() under arch/ and Documentation/ to remap_pfn_range()

convert-users-of-remap_page_range-under-drivers-and-net-to-use-remap_pfn_range.patch
vm: convert users of remap_page_range() under drivers/ and net/ to use remap_pfn_range()

convert-users-of-remap_page_range-under-include-asm--to-use-remap_pfn_range.patch
vm: convert users of remap_page_range() under include/asm-*/ to use remap_pfn_range()

convert-users-of-remap_page_range-under-sound-to-use-remap_pfn_range.patch
vm: convert users of remap_page_range() under sound/ to use remap_pfn_range()

for-mm-only-remove-remap_page_range-completely.patch
vm: for -mm only: remove remap_page_range() completely

update-noapic-description.patch
Update 'noapic' description

disk-stats-preempt-safety.patch
disk stats preempt safety

conntrack-preempt-safety.patch
conntrack stats preempt safety

neigh_stat-preempt-fix.patch
neigh_stat preempt fix

document-dec-vsxxx-ab-digitizer-as-known-working.patch
Document DEC VSXXX-AB digitizer as known working

move-struct-k_itimer-out-of-linux-schedh.patch
move struct k_itimer out of linux/sched.h

fix-bugs-in-selinux-mprotect-hook.patch
SELinux: fix bugs in mprotect hook

disable-sw-irqbalance-irqaffinity-for-e7520-e7320-e7525-change-target_cpus-on-x86_64.patch
Disable SW irqbalance/irqaffinity for E7520/E7320/E7525 - change TARGET_CPUS on x86_64

x86-64-clustered-apic-support.patch
x86-64 clustered APIC support

m32r-update-ioremap-routine.patch
m32r: update ioremap routine

bsd-secure-levels-lsm-add-time-hooks.patch
BSD Secure Levels LSM: add time hooks

bsd-secure-levels-lsm-add-time-hooks-fix.patch
bsd-secure-levels-lsm-add-time-hooks fix

bsd-secure-levels-lsm-core.patch
BSD Secure Levels LSM: core

bsd-secure-levels-lsm-core-build-fix.patch
bsd-secure-levels-lsm-core-build fix

bsd-secure-levels-lsm-documentation.patch
BSD Secure Levels LSM: documentation

acpi-better-encapsulate-eisa_set_level_irq.patch
acpi: better encapsulate eisa_set_level_irq()

display-committed-memory-limit-and-available-in-meminfo.patch
Display committed memory limit and available in meminfo

display-committed-memory-limit-and-available-in-meminfo-fix.patch
display-committed-memory-limit-and-available-in-meminfo fix

posix-compliant-cpu-clocks-v6-generic-kernel-patch.patch
Posix compliant cpu clocks V6: Generic Kernel patch

posix-compliant-cpu-clocks-v6-generic-kernel-patch-tidy.patch
posix-compliant-cpu-clocks-v6-generic-kernel-patch tidy

posix-compliant-cpu-clocks-v6-mmtimer-provides-clock_sgi_cycle.patch
Posix compliant cpu clocks V6: mmtimer provides CLOCK_SGI_CYCLE

detach_pid-restore-optimization.patch
detach_pid(): restore optimization

detach_pid-eliminate-one-find_pid-call.patch
detach_pid(): eliminate one find_pid() call

dont-include-linux-irqh-from-drivers.patch
don't include <linux/irq.h> from drivers

display-phys_proc_id-only-when-it-is-initialized.patch
x86[64]: display phys_proc_id only when it is initialized

deinline-large-function-in-blowfishc.patch
deinline large function in blowfish.c

small-sha256-cleanup.patch
small sha256 cleanup

small-sha512-cleanup.patch
small sha512 cleanup

reduce-sha512_transform-stack-usage-speedup.patch
reduce sha512_transform() stack usage, speedup

add-rotate-left-right-ops-to-bitopsh.patch
Add rotate left/right ops to bitops.h

sha512-use-asm-optimized-bit-rotation.patch
sha512: use asm-optimized bit rotation

copy_thread-unneeded-child_tid-initialization.patch
copy_thread(): unneeded child_tid initialization

drivers-remove-unused-mod_decinc_use_count.patch
drivers: remove unused MOD_{DEC,INC}_USE_COUNT

m32r-remove-arch-m32r-drivers-m5.patch
From: Christoph Hellwig <[email protected]>
Subject: [PATCH] remove arch/m32r/drivers/m5.[ch]

m32r-remove-arch-m32r-drivers-cs_internalh.patch
From: Christoph Hellwig <[email protected]>
Subject: [PATCH] remove arch/m32r/drivers/cs_internal.h

m68k-mm-off-by-one.patch
m68k: MM off-by-one

atari-acsi-dependencies.patch
Atari ACSI dependencies

minmax-removal-arch-m68k-kernel-bios32c.patch
m68k: minmax-removal arch/m68k/kernel/bios32.c

m68k-dont-emit-empty-stack-program-header-in-vmlinux.patch
M68k: don't emit empty stack program header in vmlinux

amifb-update-pseudocolor-bitfield-lenghts.patch
Amifb: update pseudocolor bitfield lenghts

amiga-frame-buffer-kill-obsolete-dmi-resolver-code.patch
Amiga frame buffer: kill obsolete DMI Resolver code

null-vs-0-cleanups.patch
m68k: NULL vs. 0 cleanups

amifb-use-new-amifboff-logic-to-enhance-audio-experience.patch
Amifb: use new amifb:off logic to enhance audio experience

firmware_class-avoid-double-free.patch
firmware_class: avoid double free

remove-scsi-ioctl-from-udf-lowlevelc.patch
remove scsi ioctl from udf/lowlevel.c

boot-parameters-quoting-of-environment-variables.patch
boot parameters: quoting of environment variables

uml-add-generic-ptrace-requests.patch
uml: add generic ptrace requests

uml-fix-get_user-warning.patch
uml: fix get_user warning

swsusp-fix-x86-64-do-not-use-memory-in-copy-loop.patch
swsusp: fix x86-64 - do not use memory in copy loop

nfsd-insecure-port-warning-shows-decimal-ipv4-address.patch
nfsd: Insecure port warning shows decimal IPv4 address

aes-586-asm-formatting-changes.patch
aes-586-asm: formatting changes

aes-586-asm-small-optimizations.patch
aes-586-asm: small optimizations

nx-fix-read_implies_exec-related-noexec-fs-breakage.patch
NX: fix read_implies_exec() related noexec-fs breakage

__iomem-annotations-for-cciss.patch
__iomem annotations for cciss

add-new-sysfs-attribute-carrier-for-net-devices.patch
Add new sysfs attribute 'carrier' for net devices.

mips-added-missing-definition-and-fixed-typo.patch
mips: added missing definition and fixed typo

drivers-atm-ambassador.c-do_pci_device-printk-warning-fix.patch
drivers/atm/ambassador.c::do_pci_device printk warning fix




2004-10-04 10:39:12

by Karsten Wiese

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Hi Andrew,

this lets it compile here:

>>>>
--- arch/i386/kernel/irq.c_rc3 2004-10-04 12:00:57.000000000 +0200
+++ arch/i386/kernel/irq.c 2004-10-04 12:34:30.000000000 +0200
@@ -199,6 +199,7 @@

atomic_t irq_err_count;

+#ifdef CONFIG_4KSTACKS
int is_irq_stack_ptr(struct task_struct *task, void *p)
{
unsigned long off;
@@ -213,7 +214,7 @@

return 0;
}
-
+#endif
/*
* /proc/interrupts printing:
*/
<<<<

Best regards,
Karsten

2004-10-04 12:17:43

by Stephane Jourdois

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Hello,

This kernel does not boot on my i386 laptop. I have nothing after
"Uncompressing kernel... Ok, booting linux". The fans are increasingly
running, so I suspect cpu is heavily used at this time. I tried to
wait several minutes, just to see.

I have the same problem since 2.6.9-rc2-mm2. Last booting kernel is
2.6.9-rc2-mm1. I tried every -mm kernel between -rc2-mm1 and -rc3-mm2.

Here is my .config for -rc3-mm2. Same config was used for -rc2-mm2,
modulo new options.

Just in case that is important, my system has a HT cpu, but disabled
in bios (I experience curious freezes with HT).

Thanks.

-----

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.9-rc3-mm2
# Mon Oct 4 12:57:38 2004
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CPUSETS is not set
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_BACKUP_BASE=16
CONFIG_BACKUP_SIZE=32

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
# CONFIG_ACPI_THINKPAD is not set
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_PROC_INTF is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_24_API is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_TABLE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_YENTA=m
CONFIG_CARDBUS=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_PCIE is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_UNIX=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=y

#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m

#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_PHYSDEV=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_RAW=m

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_SIOCGIFCONF is not set
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
# CONFIG_NET_DIVERT is not set
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# Old SIR device drivers
#
# CONFIG_IRPORT_SIR is not set

#
# Old Serial dongle support
#

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_BCSP_TXCRC is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=m

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
CONFIG_R8169_VLAN=y
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set

#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set

#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_HERMES=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_PCI_HERMES is not set
# CONFIG_ATMEL is not set

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# ATM drivers
#
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_FC is not set
CONFIG_SHAPER=m
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_MULTIPORT=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_TIPAR=m

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_INTEL_MCH=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=m
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_STUB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
# CONFIG_I2C_PCA_ISA is not set

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m

#
# Other I2C Chip support
#
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_RTC8564=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
CONFIG_W1=m
# CONFIG_W1_MATROX is not set
# CONFIG_W1_DS9490 is not set
CONFIG_W1_THERM=m
# CONFIG_W1_SMEM is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
# CONFIG_LOGO is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set

#
# PCMCIA devices
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m

#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_RW_DETECT=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
CONFIG_USB_WACOM=m
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m
CONFIG_USB_VICAM=m
CONFIG_USB_DSBR=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
# CONFIG_USB_SN9C102 is not set
CONFIG_USB_STV680=m

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
CONFIG_USB_TIGL=m
# CONFIG_USB_AUERSWALD is not set
CONFIG_USB_RIO500=m
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_SA1100 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_OMAP is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISER4_FS=m
CONFIG_REISER4_LARGE_KEY=y
# CONFIG_REISER4_CHECK is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_RT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m

#
# Caches
#
CONFIG_CACHEFS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_SECURITY=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
# CONFIG_QNX4FS_RW is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_XATTR=y
# CONFIG_CIFS_POSIX is not set
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
CONFIG_AFS_CACHEFS=y
CONFIG_RXRPC=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SMP_PROCESSOR_ID is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_4KSTACKS is not set
# CONFIG_LOCKMETER is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y

--
/// Stephane Jourdois /"\ ASCII RIBBON CAMPAIGN \\\
((( Ing?nieur d?veloppement \ / AGAINST HTML MAIL )))
\\\ 24 rue Cauchy X ///
\\\ 75015 Paris / \ +33 6 8643 3085 ///

2004-10-04 12:47:35

by Stefano Rivoir

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Andrew Morton wrote:

> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc3/2.6.9-rc3-mm2/
>
>
> - Hopefully those x86 compile errors are fixed up.
>
> - Various fairly minor updates

(#ifdef around is_irq_stack_ptr already applied)

Kernel BUGs at boot time, here is what I see (copied by hand, I hope
Stack and Code hex values are not that important :)):

[...]
IP: routing cache hash table of 4096 buckets, 32KBytes
kmem_cache_create: Early error in slab ip_fib_hash
-----[ cut here ] -----
kernel BUG at mm/slab.c:1185!
invalid operand: 0000 [#1]
PREEMPT
Modules linked in:
CPU: 0
EIP: 0060:[<c01348f6>] Not tainted VLI
EFLAGS: 00010282 (2.6.9-rc3-mm2)
EIP is at kmem_cache_create+0x51d/0x53e
eax: 00000036 ebx: 00000000 ecx: c02b7f04 edx: 00001d9f
esi: 00000000 edi: 000000ff ebp: c15fe3c0 esp: dff83f30
ds: 007b es: 007b ss: 0068
Process swapper: (pid: 1, threadinfo=dff82000 task=dff815f0)
Stack: (stripped, hope you don't need this :)
Call trace:
[<>] fib_hash_init+0xd8/0xe2
[<>] ip_fib_init+0xa/0x32
[<>] ip_rt_init+0x1cc/0x2e3
[<>] ip_init+0xf/0x14
[<>] inet_init+0xd0/0x1b3
[<>] do_initcalls+0x27/0xad
[<>] init+0x0/0xf8
[<>] init+0x0/0xf8
[<>] init+0x2a/0xf8
[<>] kernel_thread_helper+0x0/0xb
[<>] kernel_thread_helper+0x5/0xb

Bye.

--
Stefano RIVOIR

2004-10-04 14:35:56

by Karsten Wiese

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Hi,

this is a netconsole log of a badness and a kernel BUG:
>>>>
Linux version 2.6.9-rc3-mm2 ([email protected]) (gcc-Version 3.2.3 20030422
(Red Hat Linux 3.2.3-6)) #5 Mon Oct 4 16:01:40 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
DMI 2.2 present.
Built 1 zonelists
Initializing CPU#0
Kernel command line: ro root=/dev/hdc1
[email protected]/eth0,@192.168.1.11/00:E0:ED:06:9F:47
netconsole: local port 6665
netconsole: local IP 192.168.1.13
netconsole: interface eth0
netconsole: remote port 6666
netconsole: remote IP 192.168.1.11
netconsole: remote ethernet address 00:e0:ed:06:9f:47
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 997.860 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 255560k/262080k available (1938k kernel code, 5868k reserved, 815k
data, 160k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in enforcing mode
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ11 SCI: Level Trigger.
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 298k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb5a0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to [email protected]
** so I can fix the driver.
IA-32 Microcode Update Driver: v1.14 <[email protected]>
Initializing Cryptographic API
PCI: Disabling Via external APIC routing
vesafb: probe of vesafb0 failed with error -6
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
Real Time Clock Driver v1.12
ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1
ACPI: PS/2 Mouse Controller [PS2M] at irq 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
ACPI: Floppy Controller [FDC0] at I/O 0x3f0-0x3f5, 0x3f7 irq 6 dma channel 2
elevator: using anticipatory as default io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
e100: Intel(R) PRO/100 Network Driver, 3.1.4-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10
e100: eth0: e100_probe: addr 0xe4205000, irq 10, MAC addr 00:D0:B7:B2:6A:52
netconsole: device eth0 not up yet, forcing it
Badness in enable_irq
at /home/ka/kernel/2.6/linux-2.6.9-rc3-mm2/kernel/irq/manage.c:106
[<c013c561>] enable_irq+0x101/0x110
[<c0237a13>] e100_up+0x163/0x220
[<c0236df0>] e100_intr+0x0/0x150
[<c0238c90>] e100_open+0x30/0x80
[<c0289bab>] dev_open+0x8b/0xa0
[<c028daa4>] dev_mc_upload+0x24/0x50
[<c028b32a>] dev_change_flags+0x12a/0x150
[<c02975a8>] netpoll_setup+0x218/0x390
[<c023a46d>] init_netconsole+0x4d/0x80
[<c03b489b>] do_initcalls+0x2b/0xc0
[<c03d0344>] sock_init+0x44/0x50
[<c0100450>] init+0x0/0x110
[<c010047f>] init+0x2f/0x110
[<c0104300>] kernel_thread_helper+0x0/0x10
[<c0104305>] kernel_thread_helper+0x5/0x10
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
netconsole: carrier detect appears flaky, waiting 10 seconds
netconsole: network logging started
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD205AA, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: IBM-DTTA-371010, ATA DISK drive
hdd: Maxtor 4D080H4, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 40079088 sectors (20520 MB) w/2048KiB Cache, CHS=39761/16/63, UDMA(66)
hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hda3 hda4
hdc: max request size: 128KiB
hdc: 19746720 sectors (10110 MB) w/465KiB Cache, CHS=19590/16/63, UDMA(33)
hdc: hdc1 hdc2 hdc3
hdd: max request size: 128KiB
hdd: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdd: hdd1 hdd2
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS2++ Logitech Wheel Mouse on isa0060/serio1
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
error in initcall at 0xc03d1840: returned with preemption imbalance
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
PCI0 USB0 USB1 MODM UAR1 UAR2
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
sym0: <875> rev 0x3 at pci 0000:00:09.0 irq 11
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18j
Vendor: PIONEER Model: CD-ROM DR-U16S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
target0:0:2: Beginning Domain Validation
sym0:2: FAST-20 SCSI 20.0 MB/s ST (50.0 ns, offset 16)
target0:0:2: Domain Validation skipping write tests
target0:0:2: Ending Domain Validation
Vendor: TEAC Model: CD-R55S Rev: 1.0R
Type: CD-ROM ANSI SCSI revision: 02
target0:0:4: Beginning Domain Validation
sym0:4: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 15)
target0:0:4: Domain Validation skipping write tests
target0:0:4: Ending Domain Validation
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
Freeing unused kernel memory: 160k freed
------------[ cut here ]------------
kernel BUG at /home/ka/kernel/2.6/linux-2.6.9-rc3-mm2/kernel/printk.c:606!
invalid operand: 0000 [#1]
PREEMPT
Modules linked in: nls_iso8859_1 nls_cp437 vfat fat nls_utf8 ntfs ext3 jbd
sym53c8xx scsi_transport_spi sd_mod scsi_mod
CPU: 0
EIP: 0060:[<c0120a40>] Not tainted VLI
EFLAGS: 00010206 (2.6.9-rc3-mm2)
EIP is at acquire_console_sem+0x10/0x40
eax: cff3e000 ebx: c037a684 ecx: cff15e70 edx: 00000000
esi: c037a680 edi: 00000293 ebp: cff3e000 esp: cff3ff28
ds: 007b es: 007b ss: 0068
Process events/0 (pid: 3, threadinfo=cff3e000 task=cff2ab10)
Stack: c020a3bc cff15e68 cff15e70 c037a684 c01306a2 00000000 cff3ff74 00000000
cff15e78 cff3e000 cff3e000 cff3e000 00000000 c020a3b0 cff3e000 cff3e000
cff15e68 ffffffff ffffffff 00000001 00000000 c011b910 00010000 00000000
Call Trace:
[<c020a3bc>] console_callback+0xc/0xf0
[<c01306a2>] worker_thread+0x222/0x300
[<c020a3b0>] console_callback+0x0/0xf0
[<c011b910>] default_wake_function+0x0/0x20
[<c011b910>] default_wake_function+0x0/0x20
[<c0130480>] worker_thread+0x0/0x300
[<c013498a>] kthread+0xaa/0xb0
[<c01348e0>] kthread+0x0/0xb0
[<c0104305>] kernel_thread_helper+0x5/0x10
Code: ff 80 7b 02 3e 0f 85 12 ff ff ff e9 3c ff ff ff e8 16 fe ff ff e9 a5 fe
ff ff 90 b8 00 e0 ff ff 21 e0 f7 40 14 00 ff ff 0f 74 08 <0f> 0b 5e 02 c0 80
2f c0 b9 84 8e 33 c0 ff 0d 84 8e 33 c0 0f 88
<0>Kernel panic - not syncing: Fatal exception in interrupt
<<<<

the .config used:
>>>>
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.9-rc3-mm2
# Mon Oct 4 16:00:42 2004
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y

#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
# CONFIG_KEXEC is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_THINKPAD is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set

#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
CONFIG_APM_ALLOW_INTS=y
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_YENTA=y
CONFIG_CARDBUS=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_DM is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=m

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
# CONFIG_IP_NF_MATCH_IPRANGE is not set
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
# CONFIG_IP_NF_TARGET_CLASSIFY is not set
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_PCMCIA_XIRTULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
CONFIG_HP100=m
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=y
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
# CONFIG_IPMI_SI is not set
CONFIG_IPMI_WATCHDOG=m
# CONFIG_IPMI_POWEROFF is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_ELEKTOR is not set
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_PROSAVAGE is not set
CONFIG_I2C_SAVAGE4=m
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
# CONFIG_I2C_PCA_ISA is not set

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_FSCHER is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m

#
# Other I2C Chip support
#
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_XL_INIT is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set

#
# Logo configuration
#
# CONFIG_LOGO is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_RTCTIMER=m
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_MEMORY=y
# CONFIG_SND_DEBUG_DETECT is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m

#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VX222 is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
CONFIG_SND_USB_USX2Y=m

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Human Interface Devices (HID)
#
# CONFIG_USB_HID is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m

#
# Caches
#
# CONFIG_CACHEFS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_SMP_PROCESSOR_ID is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_4KSTACKS is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=m
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SECLVL is not set
CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
# CONFIG_SECURITY_SELINUX_DISABLE is not set
# CONFIG_SECURITY_SELINUX_DEVELOP is not set
# CONFIG_SECURITY_SELINUX_MLS is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_AES_586 is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
<<<<

lspci :
>>>>
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x]
(rev c4)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x
AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev
40)
00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller]
(rev 1a)
00:07.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller]
(rev 1a)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97
Audio Controller (rev 50)
00:09.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 03)
00:0a.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
00:0c.0 Network controller: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro AGP-133
(rev dc)
<<<<

thanks,
Karsten

2004-10-04 15:41:59

by Norberto Bensa

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Mathieu Segaud wrote:
> Hum, and I can see that there is a fix to get reiser4 working with 4Kstacks
> but reiser4 option still doesn't appear if CONFIG_4KSTACKS is enabled.

On the contrary, it's a fix so it doesn't show on the menu when 4KSTACKS is
selected:


diff -puN fs/Kconfig.reiser4~resier4-4kstacks-fix fs/Kconfig.reiser4
--- 25/fs/Kconfig.reiser4~resier4-4kstacks-fix 2004-08-21 14:21:30.716818728
-0700
+++ 25-akpm/fs/Kconfig.reiser4 2004-08-21 14:21:42.306056896 -0700
@@ -1,6 +1,6 @@
config REISER4_FS
tristate "Reiser4 (EXPERIMENTAL very fast general purpose filesystem)"
- depends on EXPERIMENTAL
+ depends on EXPERIMENTAL && !4KSTACKS
default y
---help---
Reiser4 is more than twice as fast for both reads and writes as


Regards,
Norberto

2004-10-04 16:34:47

by Norberto Bensa

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Hello,

Mathieu Segaud wrote:
> I had read on reiserfs@ that reiser4-parse-options-reduce-stack-usage.patch
> solved this problem. My mistake.

No, it's my mistake! :)

We were talking about two different patches. After reading your post, I tried
a look up on reiser4 and 4KSTACKS got my attention.

reiser4-parse-options-reduce-stack-usage.patch seems to fix the 4KSTACKS
issue; perhaps you'll want to revert reiser4-4kstacks-fix.patch and test it.

Best regards,
Norberto

2004-10-04 17:13:35

by Pasi Savolainen

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

* Andrew Morton <[email protected]>:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc3/2.6.9-rc3-mm2/
>
>
> - Hopefully those x86 compile errors are fixed up.

Are they something like this?

- -
pvsavola@tienel:~/linu/k25/mm$ uname -a
Linux tienel 2.6.9-rc3-mm1 #1 SMP Sun Oct 3 16:34:23 EEST 2004 i686 GNU/Linux
pvsavola@tienel:~/linu/k25/mm$ make -j1 bzImage modules
CHK include/linux/version.h
make[1]: `arch/i386/kernel/asm-offsets.s' is up to date.
CHK include/linux/compile.h
GEN_INITRAMFS_LIST usr/initramfs_list
Using shipped usr/initramfs_list
GEN .version
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
KSYM .tmp_kallsyms1.S
make: *** wait: No child processes. Stop.
- -

The 'no child processes' keeps on coming up at 'random' moments under
rc3-mm1. First time ever that I've seen it otherwise.


--
Psi -- <http://www.iki.fi/pasi.savolainen>

2004-10-04 17:20:28

by John Cherry

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2 (compile stats)


Linux 2.6 (mm tree) Compile Statistics (gcc 3.2.2)

Kernel bzImage bzImage bzImage modules bzImage modules
(defconfig) (allno) (allyes) (allyes) (allmod) (allmod)
--------------- ---------- -------- -------- -------- -------- --------
2.6.9-rc3-mm2 10w/0e 4w/9e 1754w/0e 43w/0e 4w/0e 1782w/1e
2.6.9-rc3-mm1 10w/0e 4w/10e 1768w/0e 43w/0e 4w/0e 1796w/0e
2.6.9-rc2-mm4 10w/0e 5w/0e 2573w/0e 41w/0e 4w/0e 2600w/0e
2.6.9-rc2-mm3 10w/0e 5w/0e 2400w/0e 41w/0e 4w/0e 2435w/0e
2.6.9-rc2-mm2 10w/0e 5w/0e 2919w/0e 41w/0e 4w/0e 2954w/0e
2.6.9-rc2-mm1 0w/0e 2w/0e 3541w/9e 41w/0e 3w/9e 3567w/0e
2.6.9-rc1-mm4 0w/0e 1w/0e 55w/0e 3w/0e 2w/0e 48w/0e
2.6.9-rc1-mm3 0w/0e 0w/0e 55w/13e 3w/0e 1w/0e 49w/1e
2.6.9-rc1-mm2 0w/0e 0w/0e 53w/11e 3w/0e 1w/0e 47w/0e
2.6.9-rc1-mm1 0w/0e 0w/0e 80w/0e 4w/0e 1w/0e 74w/0e
2.6.8.1-mm4 0w/0e 0w/0e 78w/0e 4w/0e 1w/0e 73w/0e
2.6.8.1-mm3 0w/96e 0w/0e 78w/97e 4w/0e 1w/0e 74w/89e
2.6.8.1-mm2 0w/96e 0w/0e 78w/97e 4w/0e 1w/0e 74w/89e
2.6.8.1-mm1 0w/0e 0w/0e 78w/0e 4w/0e 1w/0e 74w/0e
2.6.8-rc4-mm1 0w/0e 0w/5e 81w/0e 4w/0e 1w/0e 75w/0e
2.6.8-rc3-mm2 1w/7e 0w/5e 82w/8e 4w/0e 2w/8e 75w/0e
2.6.8-rc3-mm1 0w/0e 1w/5e 81w/9e 4w/0e 1w/0e 75w/0e
2.6.8-rc2-mm2 0w/0e 4w/5e 87w/9e 4w/0e 1w/0e 80w/0e
2.6.8-rc2-mm1 0w/0e 0w/0e 83w/9e 3w/0e 1w/0e 81w/0e
2.6.8-rc1-mm1 0w/0e 0w/0e 88w/9e 5w/0e 1w/0e 87w/0e
2.6.7-mm7 0w/0e 0w/0e 89w/9e 5w/0e 1w/0e 84w/0e
2.6.7-mm6 0w/0e 0w/0e 85w/9e 5w/0e 1w/0e 80w/0e
2.6.7-mm5 0w/0e 0w/0e 92w/0e 5w/0e 1w/0e 87w/0e
2.6.7-mm4 0w/0e 0w/0e 94w/0e 5w/0e 1w/0e 89w/0e
2.6.7-mm3 0w/0e 0w/0e 90w/6e 5w/0e 1w/0e 86w/0e
2.6.7-mm2 0w/0e 0w/0e 109w/0e 7w/0e 1w/0e 106w/0e
2.6.7-mm1 0w/0e 5w/0e 108w/0e 5w/0e 1w/0e 104w/0e
2.6.7-rc3-mm2 0w/0e 5w/0e 105w/10e 5w/0e 2w/0e 100w/2e
2.6.7-rc3-mm1 0w/0e 5w/0e 104w/10e 5w/0e 2w/0e 100w/2e
2.6.7-rc2-mm2 0w/0e 5w/0e 109w/10e 5w/0e 2w/0e 105w/2e
2.6.7-rc2-mm1 0w/0e 12w/0e 158w/13e 5w/0e 3w/0e 153w/4e
2.6.7-rc1-mm1 0w/0e 6w/0e 108w/0e 5w/0e 2w/0e 104w/0e
2.6.6-mm5 0w/0e 0w/0e 109w/5e 5w/0e 2w/0e 110w/0e
2.6.6-mm4 0w/0e 0w/0e 112w/9e 5w/0e 2w/5e 106w/1e
2.6.6-mm3 3w/9e 0w/0e 120w/26e 5w/0e 2w/0e 114w/10e
2.6.6-mm2 4w/11e 0w/0e 120w/24e 6w/0e 2w/0e 118w/9e
2.6.6-mm1 1w/0e 0w/0e 118w/25e 6w/0e 2w/0e 114w/10e
2.6.6-rc3-mm2 0w/0e 0w/0e 117w/ 0e 8w/0e 2w/0e 116w/0e
2.6.6-rc3-mm1 0w/0e 0w/0e 120w/10e 8w/0e 2w/0e 152w/2e
2.6.6-rc2-mm2 0w/0e 1w/5e 118w/ 0e 8w/0e 3w/0e 118w/0e
2.6.6-rc2-mm1 0w/0e 0w/0e 115w/ 0e 7w/0e 3w/0e 116w/0e
2.6.6-rc1-mm1 0w/0e 0w/7e 122w/ 0e 7w/0e 4w/0e 122w/0e
2.6.5-mm6 0w/0e 0w/0e 123w/ 0e 7w/0e 4w/0e 124w/0e
2.6.5-mm5 0w/0e 0w/0e 119w/ 0e 7w/0e 4w/0e 120w/0e
2.6.5-mm4 0w/0e 0w/0e 120w/ 0e 7w/0e 4w/0e 121w/0e
2.6.5-mm3 0w/0e 1w/0e 121w/12e 7w/0e 3w/0e 123w/0e
2.6.5-mm2 0w/0e 0w/0e 128w/12e 7w/0e 3w/0e 134w/0e
2.6.5-mm1 0w/0e 5w/0e 122w/ 0e 7w/0e 3w/0e 124w/0e
2.6.5-rc3-mm4 0w/0e 0w/0e 124w/ 0e 8w/0e 4w/0e 126w/0e
2.6.5-rc3-mm3 0w/0e 5w/0e 129w/14e 8w/0e 4w/0e 129w/6e
2.6.5-rc3-mm2 0w/0e 5w/0e 130w/14e 8w/0e 4w/0e 129w/6e
2.6.5-rc3-mm1 0w/0e 5w/0e 129w/ 0e 8w/0e 4w/0e 129w/0e
2.6.5-rc2-mm5 0w/0e 5w/0e 130w/ 0e 8w/0e 4w/0e 129w/0e
2.6.5-rc2-mm4 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e
2.6.5-rc2-mm3 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e
2.6.5-rc2-mm2 0w/0e 5w/0e 137w/ 0e 8w/0e 3w/0e 134w/0e
2.6.5-rc2-mm1 0w/0e 5w/0e 136w/ 0e 8w/0e 3w/0e 134w/0e
2.6.5-rc1-mm2 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e
2.6.5-rc1-mm1 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e
2.6.4-mm2 1w/2e 5w/2e 144w/10e 8w/0e 3w/2e 144w/0e
2.6.4-mm1 1w/0e 5w/0e 146w/ 5e 8w/0e 3w/0e 144w/0e
2.6.4-rc2-mm1 1w/0e 5w/0e 146w/12e 11w/0e 3w/0e 147w/2e
2.6.4-rc1-mm2 1w/0e 5w/0e 144w/ 0e 11w/0e 3w/0e 145w/0e
2.6.4-rc1-mm1 1w/0e 5w/0e 147w/ 5e 11w/0e 3w/0e 147w/0e
2.6.3-mm4 1w/0e 5w/0e 146w/ 0e 7w/0e 3w/0e 142w/0e
2.6.3-mm3 1w/2e 5w/2e 146w/15e 7w/0e 3w/2e 144w/5e
2.6.3-mm2 1w/8e 5w/0e 140w/ 0e 7w/0e 3w/0e 138w/0e
2.6.3-mm1 1w/0e 5w/0e 143w/ 5e 7w/0e 3w/0e 141w/0e
2.6.3-rc3-mm1 1w/0e 0w/0e 144w/13e 7w/0e 3w/0e 142w/3e
2.6.3-rc2-mm1 1w/0e 0w/265e 144w/ 5e 7w/0e 3w/0e 145w/0e
2.6.3-rc1-mm1 1w/0e 0w/265e 141w/ 5e 7w/0e 3w/0e 143w/0e
2.6.2-mm1 2w/0e 0w/264e 147w/ 5e 7w/0e 3w/0e 173w/0e
2.6.2-rc3-mm1 2w/0e 0w/265e 146w/ 5e 7w/0e 3w/0e 172w/0e
2.6.2-rc2-mm2 0w/0e 0w/264e 145w/ 5e 7w/0e 3w/0e 171w/0e
2.6.2-rc2-mm1 0w/0e 0w/264e 146w/ 5e 7w/0e 3w/0e 172w/0e
2.6.2-rc1-mm3 0w/0e 0w/265e 144w/ 8e 7w/0e 3w/0e 169w/0e
2.6.2-rc1-mm2 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e
2.6.2-rc1-mm1 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e
2.6.1-mm5 2w/5e 0w/264e 153w/11e 10w/0e 3w/0e 180w/0e
2.6.1-mm4 0w/821e 0w/264e 154w/ 5e 8w/1e 5w/0e 179w/0e
2.6.1-mm3 0w/0e 0w/0e 151w/ 5e 10w/0e 3w/0e 177w/0e
2.6.1-mm2 0w/0e 0w/0e 143w/ 5e 12w/0e 3w/0e 171w/0e
2.6.1-mm1 0w/0e 0w/0e 146w/ 9e 12w/0e 6w/0e 171w/0e
2.6.1-rc2-mm1 0w/0e 0w/0e 149w/ 0e 12w/0e 6w/0e 171w/4e
2.6.1-rc1-mm2 0w/0e 0w/0e 157w/15e 12w/0e 3w/0e 185w/4e
2.6.1-rc1-mm1 0w/0e 0w/0e 156w/10e 12w/0e 3w/0e 184w/2e
2.6.0-mm2 0w/0e 0w/0e 161w/ 0e 12w/0e 3w/0e 189w/0e
2.6.0-mm1 0w/0e 0w/0e 173w/ 0e 12w/0e 3w/0e 212w/0e

Web page with links to complete details:
http://developer.osdl.org/cherry/compile/

John



2004-10-04 19:35:35

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Andrew Morton <[email protected]> wrote:
>
> You're the second person who is seeing in_interrupt() returning true when
> clearly it should not be doing so. Ingo, did you do soemthing which might
> have caused this?

I'm suspecting that something is causing preempt_count() to overflow into
the softirq counter. An imbalanced preempt_disable(), for example.

2004-10-04 19:30:05

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Karsten Wiese <[email protected]> wrote:
>
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> Freeing unused kernel memory: 160k freed
> ------------[ cut here ]------------
> kernel BUG at /home/ka/kernel/2.6/linux-2.6.9-rc3-mm2/kernel/printk.c:606!
> invalid operand: 0000 [#1]
> PREEMPT
> Modules linked in: nls_iso8859_1 nls_cp437 vfat fat nls_utf8 ntfs ext3 jbd
> sym53c8xx scsi_transport_spi sd_mod scsi_mod
> CPU: 0
> EIP: 0060:[<c0120a40>] Not tainted VLI
> EFLAGS: 00010206 (2.6.9-rc3-mm2)
> EIP is at acquire_console_sem+0x10/0x40
> eax: cff3e000 ebx: c037a684 ecx: cff15e70 edx: 00000000
> esi: c037a680 edi: 00000293 ebp: cff3e000 esp: cff3ff28
> ds: 007b es: 007b ss: 0068
> Process events/0 (pid: 3, threadinfo=cff3e000 task=cff2ab10)
> Stack: c020a3bc cff15e68 cff15e70 c037a684 c01306a2 00000000 cff3ff74 00000000
> cff15e78 cff3e000 cff3e000 cff3e000 00000000 c020a3b0 cff3e000 cff3e000
> cff15e68 ffffffff ffffffff 00000001 00000000 c011b910 00010000 00000000
> Call Trace:
> [<c020a3bc>] console_callback+0xc/0xf0
> [<c01306a2>] worker_thread+0x222/0x300
> [<c020a3b0>] console_callback+0x0/0xf0
> [<c011b910>] default_wake_function+0x0/0x20
> [<c011b910>] default_wake_function+0x0/0x20
> [<c0130480>] worker_thread+0x0/0x300
> [<c013498a>] kthread+0xaa/0xb0
> [<c01348e0>] kthread+0x0/0xb0
> [<c0104305>] kernel_thread_helper+0x5/0x10

You're the second person who is seeing in_interrupt() returning true when
clearly it should not be doing so. Ingo, did you do soemthing which might
have caused this?

2004-10-04 19:35:28

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Stefano Rivoir <[email protected]> wrote:
>
> Andrew Morton wrote:
>
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc3/2.6.9-rc3-mm2/
> >
> >
> > - Hopefully those x86 compile errors are fixed up.
> >
> > - Various fairly minor updates
>
> (#ifdef around is_irq_stack_ptr already applied)
>
> Kernel BUGs at boot time, here is what I see (copied by hand, I hope
> Stack and Code hex values are not that important :)):
>
> [...]
> IP: routing cache hash table of 4096 buckets, 32KBytes
> kmem_cache_create: Early error in slab ip_fib_hash
> -----[ cut here ] -----
> kernel BUG at mm/slab.c:1185!
> invalid operand: 0000 [#1]
> PREEMPT
> Modules linked in:
> CPU: 0
> EIP: 0060:[<c01348f6>] Not tainted VLI
> EFLAGS: 00010282 (2.6.9-rc3-mm2)
> EIP is at kmem_cache_create+0x51d/0x53e
> eax: 00000036 ebx: 00000000 ecx: c02b7f04 edx: 00001d9f
> esi: 00000000 edi: 000000ff ebp: c15fe3c0 esp: dff83f30
> ds: 007b es: 007b ss: 0068
> Process swapper: (pid: 1, threadinfo=dff82000 task=dff815f0)
> Stack: (stripped, hope you don't need this :)
> Call trace:
> [<>] fib_hash_init+0xd8/0xe2
> [<>] ip_fib_init+0xa/0x32
> [<>] ip_rt_init+0x1cc/0x2e3
> [<>] ip_init+0xf/0x14
> [<>] inet_init+0xd0/0x1b3
> [<>] do_initcalls+0x27/0xad
> [<>] init+0x0/0xf8
> [<>] init+0x0/0xf8
> [<>] init+0x2a/0xf8
> [<>] kernel_thread_helper+0x0/0xb
> [<>] kernel_thread_helper+0x5/0xb

That's odd. I'd be suspecting that in_interrupt() is falsely returning true.

Can you try this patch, see what it says?

And can you send the .config along?


diff -puN mm/slab.c~a mm/slab.c
--- 25/mm/slab.c~a 2004-10-04 12:16:00.808822288 -0700
+++ 25-akpm/mm/slab.c 2004-10-04 12:17:25.822898184 -0700
@@ -1180,6 +1180,9 @@ kmem_cache_create (const char *name, siz
(size < BYTES_PER_WORD) ||
(size > (1<<MAX_OBJ_ORDER)*PAGE_SIZE) ||
(dtor && !ctor)) {
+ printk("in_interrupt(): %ld\n", in_interrupt());
+ printk("preempt_count(): %x\n", preempt_count());
+ printk("size: %zd\n", size);
printk(KERN_ERR "%s: Early error in slab %s\n",
__FUNCTION__, name);
BUG();
_

2004-10-04 19:56:57

by Christian Borntraeger

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc3/2
>.6.9-rc3-mm2/
[...]
> sysfs backing store

What is the status of these patches? Any chance of merging them during the
2.6.10-rc time period or are there any known problems left?

To me, these patches make a lot of sense for systems with a large amount of
devices.

cheers

Christian

2004-10-04 21:15:48

by Grant Wilson

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.9-rc3-mm2
# Mon Oct 4 21:41:19 2004
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_GENERIC_HARDIRQS=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_THINKPAD is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_PROC_INTF is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_24_API is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_TABLE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_ACPI_CPUFREQ is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_UNORDERED_IO is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_UID16=y

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
# CONFIG_KEXEC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
# CONFIG_CDROM_PKTCDVD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
CONFIG_SCSI_SATA_VIA=y
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID5=m
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_CONFIG=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_UNIX=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m

#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m

#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_RAW=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
# CONFIG_ATM_LANE is not set
# CONFIG_ATM_BR2684 is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# ATM drivers
#
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_DIGI is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_MULTIPORT=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL_MCH is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_RTC_IRQ=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m

#
# Other I2C Chip support
#
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_RTC8564=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
# CONFIG_FB_ATY_CT is not set
# CONFIG_FB_ATY_GX is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_BIT32_EMUL=m
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VX222 is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_USB_BLUETOOTH_TTY is not set
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_SPEEDTOUCH is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# Firmware Drivers
#
CONFIG_EDD=m

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_RT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m

#
# Caches
#
# CONFIG_CACHEFS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_SMP_PROCESSOR_ID=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_CHECKING is not set
# CONFIG_INIT_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_IOMMU_DEBUG=y
CONFIG_IOMMU_LEAK=y
# CONFIG_KGDB is not set

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
# CONFIG_SECURITY_SECLVL is not set
# CONFIG_SECURITY_SELINUX is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m


Attachments:
.config (32.73 kB)

2004-10-04 21:28:55

by Ingo Molnar

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2


* Andrew Morton <[email protected]> wrote:

> Andrew Morton <[email protected]> wrote:
> >
> > You're the second person who is seeing in_interrupt() returning true when
> > clearly it should not be doing so. Ingo, did you do soemthing which might
> > have caused this?
>
> I'm suspecting that something is causing preempt_count() to overflow
> into the softirq counter. An imbalanced preempt_disable(), for
> example.

yes, that was it. Must not put side-effects into a macro that is NOP on
!SMP.

Ingo

Signed-off-by: Ingo Molnar <[email protected]>

--- linux/include/net/neighbour.h.orig
+++ linux/include/net/neighbour.h
@@ -113,8 +113,9 @@ struct neigh_statistics

#define NEIGH_CACHE_STAT_INC(tbl, field) \
do { \
- (per_cpu_ptr((tbl)->stats, get_cpu())->field)++; \
- put_cpu(); \
+ preempt_disable(); \
+ (per_cpu_ptr((tbl)->stats, smp_processor_id())->field)++; \
+ preempt_enable(); \
} while (0)

struct neighbour

2004-10-04 21:33:09

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Grant Wilson <[email protected]> wrote:
>
> Andrew Morton wrote:
> [snip]
>
> >>IP: routing cache hash table of 4096 buckets, 32KBytes
> >>kmem_cache_create: Early error in slab ip_fib_hash
> >>-----[ cut here ] -----
> >>kernel BUG at mm/slab.c:1185!
> >>invalid operand: 0000 [#1]
> >>PREEMPT
>
> [snip]
>
> I am hitting the same stop on my amd64 box. With your patch the
> following is reported:
>
> in_interrupt(): 268435200 (ie 0x0fffff00)
> preempt_count(): ffffffff

heh, OK, someone goofed there.

Could you try this patch? It'll locate the bug for us.

--- 25/include/linux/preempt.h~a Mon Oct 4 14:31:24 2004
+++ 25-akpm/include/linux/preempt.h Mon Oct 4 14:31:49 2004
@@ -19,6 +19,8 @@ do { \
#define dec_preempt_count() \
do { \
preempt_count()--; \
+ if (preempt_count() == -1) \
+ *(char *)0 = 0; \
} while (0)

#ifdef CONFIG_PREEMPT
_


(I'd have used BUG, but that might cause inclusion problems)

2004-10-04 21:38:22

by Ingo Molnar

[permalink] [raw]
Subject: [patch, 2.6.9-rc3-mm2] preemption debugging


* Ingo Molnar <[email protected]> wrote:

> * Andrew Morton <[email protected]> wrote:
>
> > I'm suspecting that something is causing preempt_count() to overflow
> > into the softirq counter. An imbalanced preempt_disable(), for
> > example.
>
> yes, that was it. Must not put side-effects into a macro that is NOP
> on !SMP.

btw., this bug was particularly nasty costing me a couple of hours,
since it triggered in neigh_periodic_timer() and due to the softirq
count the mismatch didnt show only until much later in irq_exit() when
there was no trace of the timer context anymore. So i obviously first
suspected the IRQ changes ... To prevent similar bugs:

The patch below does quite extensive preempt-count debugging and catches
this bug (and others) right when they happen. It also consolidates
DEBUG_SMP_PROCESSOR_ID into DEBUG_PREEMPT. We might want to carry this
in -mm a bit?

Ingo

Signed-off-by: Ingo Molnar <[email protected]>

--- linux/kernel/sched.c.orig
+++ linux/kernel/sched.c
@@ -2963,8 +2963,37 @@ static inline int dependent_idle(const r
}
#endif

-#if defined(CONFIG_PREEMPT) && defined(__smp_processor_id) && \
- defined(CONFIG_DEBUG_SMP_PROCESSOR_ID)
+#if defined(CONFIG_PREEMPT) && defined(CONFIG_DEBUG_PREEMPT)
+
+void fastcall add_preempt_count(int val)
+{
+ /*
+ * Underflow?
+ */
+ BUG_ON(((int)preempt_count() < 0));
+ preempt_count() += val;
+ /*
+ * Spinlock count overflowing soon?
+ */
+ BUG_ON((preempt_count() & PREEMPT_MASK) >= PREEMPT_MASK-10);
+}
+EXPORT_SYMBOL(add_preempt_count);
+
+void fastcall sub_preempt_count(int val)
+{
+ /*
+ * Underflow?
+ */
+ BUG_ON(val > preempt_count());
+ /*
+ * Is the spinlock portion underflowing?
+ */
+ BUG_ON((val < PREEMPT_MASK) && !(preempt_count() & PREEMPT_MASK));
+ preempt_count() -= val;
+}
+EXPORT_SYMBOL(sub_preempt_count);
+
+#ifdef __smp_processor_id
/*
* Debugging check.
*/
@@ -3015,7 +3044,9 @@ out:

EXPORT_SYMBOL(smp_processor_id);

-#endif
+#endif /* __smp_processor_id */
+
+#endif /* PREEMPT && DEBUG_PREEMPT */

#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT)

@@ -3330,7 +3361,7 @@ asmlinkage void __sched preempt_schedule
return;

need_resched:
- preempt_count() += PREEMPT_ACTIVE;
+ add_preempt_count(PREEMPT_ACTIVE);
/*
* We keep the big kernel semaphore locked, but we
* clear ->lock_depth so that schedule() doesnt
@@ -3344,7 +3375,7 @@ need_resched:
#ifdef CONFIG_PREEMPT_BKL
task->lock_depth = saved_lock_depth;
#endif
- preempt_count() -= PREEMPT_ACTIVE;
+ sub_preempt_count(PREEMPT_ACTIVE);

/* we could miss a preemption opportunity between schedule and now */
barrier();
@@ -4319,12 +4350,14 @@ asmlinkage long sys_sched_yield(void)

static inline void __cond_resched(void)
{
+
+
if (preempt_count() & PREEMPT_ACTIVE)
return;
do {
- preempt_count() += PREEMPT_ACTIVE;
+ add_preempt_count(PREEMPT_ACTIVE);
schedule();
- preempt_count() -= PREEMPT_ACTIVE;
+ sub_preempt_count(PREEMPT_ACTIVE);
} while (need_resched());
}

--- linux/kernel/irq/handle.c.orig
+++ linux/kernel/irq/handle.c
@@ -77,7 +77,7 @@ irqreturn_t no_action(int cpl, void *dev
*/
void irq_exit(void)
{
- preempt_count() -= IRQ_EXIT_OFFSET;
+ sub_preempt_count(IRQ_EXIT_OFFSET);
if (!in_interrupt() && local_softirq_pending())
do_softirq();
preempt_enable_no_resched();
--- linux/kernel/timer.c.orig
+++ linux/kernel/timer.c
@@ -465,7 +465,14 @@ repeat:
smp_wmb();
timer->base = NULL;
spin_unlock_irq(&base->lock);
- fn(data);
+ {
+ u32 preempt_count = preempt_count();
+ fn(data);
+ if (preempt_count != preempt_count()) {
+ printk("huh, entered %p with %08x, exited with %08x?\n", fn, preempt_count, preempt_count());
+ BUG();
+ }
+ }
spin_lock_irq(&base->lock);
goto repeat;
}
--- linux/kernel/softirq.c.orig
+++ linux/kernel/softirq.c
@@ -142,7 +142,7 @@ void local_bh_enable(void)
* Keep preemption disabled until we are done with
* softirq processing:
*/
- preempt_count() -= SOFTIRQ_OFFSET - 1;
+ sub_preempt_count(SOFTIRQ_OFFSET - 1);

if (unlikely(!in_interrupt() && local_softirq_pending()))
invoke_softirq();
--- linux/include/linux/interrupt.h.orig
+++ linux/include/linux/interrupt.h
@@ -70,9 +70,9 @@ extern void enable_irq(unsigned int irq)

/* SoftIRQ primitives. */
#define local_bh_disable() \
- do { preempt_count() += SOFTIRQ_OFFSET; barrier(); } while (0)
+ do { add_preempt_count(SOFTIRQ_OFFSET); barrier(); } while (0)
#define __local_bh_enable() \
- do { barrier(); preempt_count() -= SOFTIRQ_OFFSET; } while (0)
+ do { barrier(); sub_preempt_count(SOFTIRQ_OFFSET); } while (0)

extern void local_bh_enable(void);

--- linux/include/linux/hardirq.h.orig
+++ linux/include/linux/hardirq.h
@@ -82,10 +82,10 @@ extern void synchronize_irq(unsigned int
#endif

#ifdef CONFIG_GENERIC_HARDIRQS
-#define nmi_enter() (preempt_count() += HARDIRQ_OFFSET)
-#define nmi_exit() (preempt_count() -= HARDIRQ_OFFSET)

-#define irq_enter() (preempt_count() += HARDIRQ_OFFSET)
+#define irq_enter() add_preempt_count(HARDIRQ_OFFSET)
+#define nmi_enter() irq_enter()
+#define nmi_exit() sub_preempt_count(HARDIRQ_OFFSET)
extern void irq_exit(void);
#endif

--- linux/include/linux/smp.h.orig
+++ linux/include/linux/smp.h
@@ -110,7 +110,7 @@ static inline void smp_send_reschedule(i
#endif /* !SMP */

#ifdef __smp_processor_id
-# if defined(CONFIG_PREEMPT) && defined(CONFIG_DEBUG_SMP_PROCESSOR_ID)
+# if defined(CONFIG_PREEMPT) && defined(CONFIG_DEBUG_PREEMPT)
/*
* temporary debugging check detecting places that use
* smp_processor_id() in a potentially unsafe way:
--- linux/include/linux/preempt.h.orig
+++ linux/include/linux/preempt.h
@@ -9,17 +9,18 @@
#include <linux/config.h>
#include <linux/linkage.h>

-#define preempt_count() (current_thread_info()->preempt_count)
+#ifdef CONFIG_DEBUG_PREEMPT
+ extern void fastcall add_preempt_count(int val);
+ extern void fastcall sub_preempt_count(int val);
+#else
+# define add_preempt_count(val) do { preempt_count() += (val); } while (0)
+# define sub_preempt_count(val) do { preempt_count() -= (val); } while (0)
+#endif

-#define inc_preempt_count() \
-do { \
- preempt_count()++; \
-} while (0)
+#define inc_preempt_count() add_preempt_count(1)
+#define dec_preempt_count() sub_preempt_count(1)

-#define dec_preempt_count() \
-do { \
- preempt_count()--; \
-} while (0)
+#define preempt_count() (current_thread_info()->preempt_count)

#ifdef CONFIG_PREEMPT

@@ -51,9 +52,15 @@ do { \

#else

+#ifdef CONFIG_PREEMPT_TIMING
+#define preempt_disable() inc_preempt_count()
+#define preempt_enable_no_resched() dec_preempt_count()
+#define preempt_enable() dec_preempt_count()
+#else
#define preempt_disable() do { } while (0)
#define preempt_enable_no_resched() do { } while (0)
#define preempt_enable() do { } while (0)
+#endif
#define preempt_check_resched() do { } while (0)

#endif
--- linux/lib/Kconfig.debug.orig
+++ linux/lib/Kconfig.debug
@@ -52,14 +52,15 @@ config DEBUG_SPINLOCK_SLEEP
If you say Y here, various routines which may sleep will become very
noisy if they are called with a spinlock held.

-config DEBUG_SMP_PROCESSOR_ID
- bool "Preempt-unsafe smp_processor_id() checking"
+config DEBUG_PREEMPT
+ bool "Debug preemptible kernel"
depends on PREEMPT && X86
default y
help
If you say Y here then the kernel will use a debug variant of the
commonly used smp_processor_id() function and will print warnings
- if kernel code uses it in a preemption-unsafe way.
+ if kernel code uses it in a preemption-unsafe way. Also, the kernel
+ will detect preemption count underflows.

config DEBUG_HIGHMEM
bool "Highmem debugging"

2004-10-04 21:38:23

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Ingo Molnar <[email protected]> wrote:
>
> Must not put side-effects into a macro that is NOP on
> !SMP.

Doh. I added several of those. Thanks.

2004-10-04 21:48:18

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Andrew Morton <[email protected]> wrote:
>
> Could you try this patch? It'll locate the bug for us.

Don't worry about this - Ingo found it.

You could try these instead:

--- 25/include/linux/netfilter_ipv4/ip_conntrack.h~conntrack-preempt-safety-fix Mon Oct 4 14:36:19 2004
+++ 25-akpm/include/linux/netfilter_ipv4/ip_conntrack.h Mon Oct 4 14:37:02 2004
@@ -311,10 +311,11 @@ struct ip_conntrack_stat
unsigned int expect_delete;
};

-#define CONNTRACK_STAT_INC(count) \
- do { \
- per_cpu(ip_conntrack_stat, get_cpu()).count++; \
- put_cpu(); \
+#define CONNTRACK_STAT_INC(count) \
+ do { \
+ preempt_disable(); \
+ per_cpu(ip_conntrack_stat, smp_processor_id()).count++; \
+ preempt_disable(); \
} while (0)

/* eg. PROVIDES_CONNTRACK(ftp); */
_


--- 25/include/net/neighbour.h~neigh_stat-preempt-fix-fix Mon Oct 4 14:39:22 2004
+++ 25-akpm/include/net/neighbour.h Mon Oct 4 14:39:22 2004
@@ -113,8 +113,9 @@ struct neigh_statistics

#define NEIGH_CACHE_STAT_INC(tbl, field) \
do { \
- (per_cpu_ptr((tbl)->stats, get_cpu())->field)++; \
- put_cpu(); \
+ preempt_disable(); \
+ (per_cpu_ptr((tbl)->stats, smp_processor_id())->field)++; \
+ preempt_enable(); \
} while (0)

struct neighbour
_

2004-10-04 21:50:33

by Ingo Molnar

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2


* Andrew Morton <[email protected]> wrote:

> Ingo Molnar <[email protected]> wrote:
> >
> > Must not put side-effects into a macro that is NOP on
> > !SMP.
>
> This one, too:
>
> - per_cpu(ip_conntrack_stat, get_cpu()).count++; \
> - put_cpu(); \

btw., also remove or fix the get_cpu_ptr() definition in percpu.h, it's
buggy for the same reason, but fortunately unused.

Ingo

2004-10-04 21:48:21

by Dominik Karall

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

On Monday 04 October 2004 11:02, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc3/2.6
>.9-rc3-mm2/

the kernel does not boot on my machine. following scheduler error:

scheduling while atomic: pump/ 0xfffffffc/988
[<>] schedule
[<>] schedule_timeout
[<>] process_timeout
[<>] inet_wait_for_connect
[<>] autoremove_wake_function
[<>] autoremove_wake_function
[<>] inet_stream_connect
[<>] sys_connect
[<>] sock_setsockopt
[<>] sock_map_fd
[<>] __sock_create
[<>] sockfd_lookup
[<>] sys_setsockopt
[<>] sys_socketcall
[<>] get_unused_fd
[<>] syscall_call
scheduling while atomic: pump/ 0xfffffffc/988
[<>] schedule
[<>] destroy_inode
[<>] iput
[<>] dput
[<>] __fput
[<>] filp_close
[<>] work_resched

i copied it by hand, so i hope there is no need for the offsets! if so, let me
know and i will write them down.
mm1 boots without any of these problems.

.config attached!

best regards,
dominik


Attachments:
(No filename) (0.00 B)
(No filename) (307.00 B)
Download all attachments

2004-10-04 21:57:40

by Grant Wilson

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Andrew Morton wrote:
[snip]

> You could try these instead:
>
> --- 25/include/linux/netfilter_ipv4/ip_conntrack.h~conntrack-preempt-safety-fix Mon Oct 4 14:36:19 2004
> +++ 25-akpm/include/linux/netfilter_ipv4/ip_conntrack.h Mon Oct 4 14:37:02 2004
> @@ -311,10 +311,11 @@ struct ip_conntrack_stat
> unsigned int expect_delete;
> };
>
> -#define CONNTRACK_STAT_INC(count) \
> - do { \
> - per_cpu(ip_conntrack_stat, get_cpu()).count++; \
> - put_cpu(); \
> +#define CONNTRACK_STAT_INC(count) \
> + do { \
> + preempt_disable(); \
> + per_cpu(ip_conntrack_stat, smp_processor_id()).count++; \
> + preempt_disable();
^^^^^^^^^^^^^^^^^^
Should this not be preempt_enable(); ?

Cheers,
Grant

2004-10-04 22:06:00

by Hua Zhong (hzhong)

[permalink] [raw]
Subject: RE: 2.6.9-rc3-mm2



> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Andrew Morton
> Sent: Monday, October 04, 2004 2:40 PM
> To: [email protected]; [email protected]; [email protected]
> Subject: Re: 2.6.9-rc3-mm2
>
>
> Andrew Morton <[email protected]> wrote:
> >
> > Could you try this patch? It'll locate the bug for us.
>
> Don't worry about this - Ingo found it.
>
> You could try these instead:
>
> ---
> 25/include/linux/netfilter_ipv4/ip_conntrack.h~conntrack-preem
> pt-safety-fix Mon Oct 4 14:36:19 2004
> +++ 25-akpm/include/linux/netfilter_ipv4/ip_conntrack.h
> Mon Oct 4 14:37:02 2004
> @@ -311,10 +311,11 @@ struct ip_conntrack_stat
> unsigned int expect_delete;
> };
>
> -#define CONNTRACK_STAT_INC(count) \
> - do { \
> - per_cpu(ip_conntrack_stat, get_cpu()).count++; \
> - put_cpu(); \
> +#define CONNTRACK_STAT_INC(count)
> \
> + do {
> \
> + preempt_disable();
> \
> + per_cpu(ip_conntrack_stat,
> smp_processor_id()).count++; \
> + preempt_disable();

I guess it should be "preempt_enable()"? :)

> \
> } while (0)
>
> /* eg. PROVIDES_CONNTRACK(ftp); */
> _
>
>
> --- 25/include/net/neighbour.h~neigh_stat-preempt-fix-fix
> Mon Oct 4 14:39:22 2004
> +++ 25-akpm/include/net/neighbour.h Mon Oct 4 14:39:22 2004
> @@ -113,8 +113,9 @@ struct neigh_statistics
>
> #define NEIGH_CACHE_STAT_INC(tbl, field)
> \
> do {
> \
> - (per_cpu_ptr((tbl)->stats,
> get_cpu())->field)++; \
> - put_cpu();
> \
> + preempt_disable();
> \
> + (per_cpu_ptr((tbl)->stats,
> smp_processor_id())->field)++; \
> + preempt_enable();
> \
> } while (0)
>
> struct neighbour
> _
>
> -
> To unsubscribe from this list: send the line "unsubscribe
> linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>

2004-10-04 22:14:33

by Grant Wilson

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Andrew Morton wrote:
> You could try these instead:

With the second preempt_disable() in the first part of the patch
changed to a preempt_enable() my box now boots.

Thanks,
Grant

2004-10-04 22:30:04

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Ingo Molnar <[email protected]> wrote:
>
> Must not put side-effects into a macro that is NOP on
> !SMP.

This one, too:

diff -puN include/linux/netfilter_ipv4/ip_conntrack.h~conntrack-preempt-safety-fix include/linux/netfilter_ipv4/ip_conntrack.h
--- 25/include/linux/netfilter_ipv4/ip_conntrack.h~conntrack-preempt-safety-fix Mon Oct 4 14:36:19 2004
+++ 25-akpm/include/linux/netfilter_ipv4/ip_conntrack.h Mon Oct 4 14:37:02 2004
@@ -311,10 +311,11 @@ struct ip_conntrack_stat
unsigned int expect_delete;
};

-#define CONNTRACK_STAT_INC(count) \
- do { \
- per_cpu(ip_conntrack_stat, get_cpu()).count++; \
- put_cpu(); \
+#define CONNTRACK_STAT_INC(count) \
+ do { \
+ preempt_disable(); \
+ per_cpu(ip_conntrack_stat, smp_processor_id()).count++; \
+ preempt_disable(); \
} while (0)

/* eg. PROVIDES_CONNTRACK(ftp); */
_

2004-10-04 23:42:14

by Ed Tomlinson

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2 ip_conntrack problems

On Monday 04 October 2004 05:02, Andrew Morton wrote:

> - Hopefully those x86 compile errors are fixed up.
>
> - Various fairly minor updates
>
> Changes since 2.6.9-rc3-mm1:

Has anyone figured out how to fix this one (9-rc3-mm1 compiled ok).

CC [M] net/ipv4/netfilter/ip_conntrack_standalone.o
net/ipv4/netfilter/ip_conntrack_standalone.c:34:47: linux/netfilter_ipv4/ip_conntrack.h: No such file or directory
In file included from net/ipv4/netfilter/ip_conntrack_standalone.c:35:
include/linux/netfilter_ipv4/ip_conntrack_protocol.h:20: warning: "struct ip_conntrack_tuple" declared inside parameter list

TIA,
Ed

2004-10-05 00:05:37

by Karsten Wiese

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Am Montag 04 Oktober 2004 23:37 schrieb Andrew Morton:
> Ingo Molnar <[email protected]> wrote:
> > Must not put side-effects into a macro that is NOP on
> > !SMP.
>
> This one, too:
>
> diff -puN
> include/linux/netfilter_ipv4/ip_conntrack.h~conntrack-preempt-safety-fix
> include/linux/netfilter_ipv4/ip_conntrack.h ---
> 25/include/linux/netfilter_ipv4/ip_conntrack.h~conntrack-preempt-safety-fix
> Mon Oct 4 14:36:19 2004 +++
> 25-akpm/include/linux/netfilter_ipv4/ip_conntrack.h Mon Oct 4 14:37:02
> 2004 @@ -311,10 +311,11 @@ struct ip_conntrack_stat
> unsigned int expect_delete;
> };
>
> -#define CONNTRACK_STAT_INC(count) \
> - do { \
> - per_cpu(ip_conntrack_stat, get_cpu()).count++; \
> - put_cpu(); \
> +#define CONNTRACK_STAT_INC(count) \
> + do { \
> + preempt_disable(); \
> + per_cpu(ip_conntrack_stat, smp_processor_id()).count++; \
> + preempt_disable(); \
> } while (0)
>
> /* eg. PROVIDES_CONNTRACK(ftp); */
> _

Applied this and Ingos patch. The machine boots up now with one badness only:
>>>>
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
Badness in enable_irq
at /home/ka/kernel/2.6/linux-2.6.9-rc3-mm2/kernel/irq/manage.c:106
[<c013c561>] enable_irq+0x101/0x110
[<c0237a13>] e100_up+0x163/0x220
[<c0236df0>] e100_intr+0x0/0x150
[<c0238c90>] e100_open+0x30/0x80
[<c0289bab>] dev_open+0x8b/0xa0
[<c028daa4>] dev_mc_upload+0x24/0x50
[<c028b32a>] dev_change_flags+0x12a/0x150
[<c02c9d87>] devinet_ioctl+0x277/0x710
[<c01c1a8e>] copy_to_user+0x3e/0x50
[<c02cc2c6>] inet_ioctl+0x66/0xb0
[<c0281129>] sock_ioctl+0xc9/0x260
[<c0170a5a>] sys_ioctl+0xea/0x250
[<c0118450>] do_page_fault+0x0/0x618
[<c010620d>] sysenter_past_esp+0x52/0x71
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Installing knfsd (copyright (C) 1996 [email protected]).
<<<<

uhci_hcd is not loaded yet. After "modprobe uhci_hcd" another badness:
>>>>
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 9 for device 0000:00:07.2
PCI: Sharing IRQ 9 with 0000:00:07.3
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller
uhci_hcd 0000:00:07.2: irq 9, io base 0xa400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:07.3
PCI: Sharing IRQ 9 with 0000:00:07.2
uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (#2)
uhci_hcd 0000:00:07.3: irq 9, io base 0xa800
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Badness in remove_proc_entry
at /home/ka/kernel/2.6/linux-2.6.9-rc3-mm2/fs/proc/generic.c:688
[<c018eee9>] remove_proc_entry+0x109/0x150
[<d08a3107>] uhci_hcd_init+0x107/0x122 [uhci_hcd]
[<c0139617>] sys_init_module+0x227/0x250
[<c010620d>] sysenter_past_esp+0x52/0x71
<<<<

(nothing else done, ) the following "rmmod uhci_hcd" results in a NULL pointer
dereference:
>>>>
uhci_hcd 0000:00:07.2: remove, state 1
usb usb1: USB disconnect, address 1
uhci_hcd 0000:00:07.2: USB bus 1 deregistered
uhci_hcd 0000:00:07.3: remove, state 1
usb usb2: USB disconnect, address 1
Unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
c018ee07
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
Modules linked in: uhci_hcd apm via686a eeprom i2c_sensor i2c_isa i2c_viapro
i2c_core parport_pc lp parport snd_via82xx snd_ac97_codec snd_pcm snd_timer
snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore nfsd
exportfs lockd sunrpc nls_iso8859_1 nls_cp437 vfat fat nls_utf8 ntfs ext3 jbd
sym53c8xx scsi_transport_spi sd_mod scsi_mod
CPU: 0
EIP: 0060:[<c018ee07>] Not tainted VLI
EFLAGS: 00210246 (2.6.9-rc3-mm2)
EIP is at remove_proc_entry+0x27/0x150
eax: 00000000 ebx: cffdb800 ecx: ffffffff edx: 00000000
esi: c13e1200 edi: 00000000 ebp: c52ba000 esp: c52bbe88
ds: 007b es: 007b ss: 0068
Process rmmod (pid: 3243, threadinfo=c52ba000 task=cc2f6dd0)
Stack: c52ba000 00000003 cc88c620 c01bd93e 00000000 c56b1540 c13e1200 c03aeb60
c013c763 00000000 cffdb800 c52ba000 00200212 00000009 c13e1200 c1293400
c1293444 c52ba000 c026f877 00000009 c13e1200 c129349c 00000001 c1293400
Call Trace:
[<c01bd93e>] kobject_put+0x1e/0x30
[<c013c763>] free_irq+0x93/0x100
[<c026f877>] usb_hcd_pci_remove+0xb7/0x190
[<c01c9596>] pci_device_remove+0x76/0x80
[<c021b2e6>] device_release_driver+0x66/0x70
[<c021b31b>] driver_detach+0x2b/0x40
[<c021b7bc>] bus_remove_driver+0x4c/0x90
[<c021bd13>] driver_unregister+0x13/0x30
[<c01c9816>] pci_unregister_driver+0x16/0x30
[<d0a3ff9f>] uhci_hcd_cleanup+0xf/0x66 [uhci_hcd]
[<c01372b5>] sys_delete_module+0x155/0x180
[<c0150f87>] sys_munmap+0x47/0x70
[<c010620d>] sysenter_past_esp+0x52/0x71
Code: 00 00 00 00 57 56 53 83 ec 14 8b 5c 24 28 8b 54 24 24 85 db 89 54 24 10
0f 84 03 01 00 00 8b 54 24 10 31 c0 b9 ff ff ff ff 89 d7 <f2> ae f7 d1 49 8b
43 34 89 ce 8d 7b 34 85 c0 74 30 90 8d b4 26
<<<<

2.6.9-rc3 is ok, though there is some floppy head seaking noise which I don't
understand the reason for on "rmmod uhci_hcd".
Nothing is connected to the uhci ports.
.config and machine is the same as in the previous e-mail.

Thanks,
Karsten


2004-10-05 00:13:41

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2 ip_conntrack problems

Ed Tomlinson <[email protected]> wrote:
>
> Has anyone figured out how to fix this one (9-rc3-mm1 compiled ok).
>
> CC [M] net/ipv4/netfilter/ip_conntrack_standalone.o
> net/ipv4/netfilter/ip_conntrack_standalone.c:34:47: linux/netfilter_ipv4/ip_conntrack.h: No such file or directory

Works for me. Perhaps you're missing that file?

2004-10-05 00:14:52

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Karsten Wiese <[email protected]> wrote:
>
> Unable to handle kernel NULL pointer dereference at virtual address 00000000
> printing eip:
> c018ee07
> *pde = 00000000
> Oops: 0000 [#1]
> PREEMPT
> Modules linked in: uhci_hcd apm via686a eeprom i2c_sensor i2c_isa i2c_viapro
> i2c_core parport_pc lp parport snd_via82xx snd_ac97_codec snd_pcm snd_timer
> snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore nfsd
> exportfs lockd sunrpc nls_iso8859_1 nls_cp437 vfat fat nls_utf8 ntfs ext3 jbd
> sym53c8xx scsi_transport_spi sd_mod scsi_mod
> CPU: 0
> EIP: 0060:[<c018ee07>] Not tainted VLI
> EFLAGS: 00210246 (2.6.9-rc3-mm2)
> EIP is at remove_proc_entry+0x27/0x150
> eax: 00000000 ebx: cffdb800 ecx: ffffffff edx: 00000000
> esi: c13e1200 edi: 00000000 ebp: c52ba000 esp: c52bbe88
> ds: 007b es: 007b ss: 0068
> Process rmmod (pid: 3243, threadinfo=c52ba000 task=cc2f6dd0)
> Stack: c52ba000 00000003 cc88c620 c01bd93e 00000000 c56b1540 c13e1200 c03aeb60
> c013c763 00000000 cffdb800 c52ba000 00200212 00000009 c13e1200 c1293400
> c1293444 c52ba000 c026f877 00000009 c13e1200 c129349c 00000001 c1293400
> Call Trace:
> [<c01bd93e>] kobject_put+0x1e/0x30
> [<c013c763>] free_irq+0x93/0x100
> [<c026f877>] usb_hcd_pci_remove+0xb7/0x190
> [<c01c9596>] pci_device_remove+0x76/0x80
> [<c021b2e6>] device_release_driver+0x66/0x70
> [<c021b31b>] driver_detach+0x2b/0x40
> [<c021b7bc>] bus_remove_driver+0x4c/0x90
> [<c021bd13>] driver_unregister+0x13/0x30
> [<c01c9816>] pci_unregister_driver+0x16/0x30
> [<d0a3ff9f>] uhci_hcd_cleanup+0xf/0x66 [uhci_hcd]
> [<c01372b5>] sys_delete_module+0x155/0x180
> [<c0150f87>] sys_munmap+0x47/0x70
> [<c010620d>] sysenter_past_esp+0x52/0x71

I think the USB guys have sorted out a few things in there, so maybe this will
be fixed in next -mm.

2004-10-05 00:38:52

by Andrew Rodland

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Stephane Jourdois wrote:

> Hello,
>
> This kernel does not boot on my i386 laptop. I have nothing after
> "Uncompressing kernel... Ok, booting linux". The fans are increasingly
> running, so I suspect cpu is heavily used at this time. I tried to
> wait several minutes, just to see.
>
> I have the same problem since 2.6.9-rc2-mm2. Last booting kernel is
> 2.6.9-rc2-mm1. I tried every -mm kernel between -rc2-mm1 and -rc3-mm2.
>
> Here is my .config for -rc3-mm2. Same config was used for -rc2-mm2,
> modulo new options.
>


> CONFIG_PREEMPT_BKL=y

Try compiling with this one off; it seems to cause problems on some systems.


2004-10-05 03:26:46

by Andrew Rodland

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Andrew Morton wrote:

>
>
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc3/2.6.9-rc3-mm2/

I get an oops if I don't disable preempt-BKL.

I've attached a log of the oops (hand-copied) and my .config (except with
preempt-BKL disabled). System is a Dell Latitude D600, Pentium-M w/i855.


Attachments:
.config (32.80 kB)
oopslog.txt (1.50 kB)
Download all attachments

2004-10-05 06:57:25

by Stefano Rivoir

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Andrew Morton wrote:

> Andrew Morton <[email protected]> wrote:
>
>>Could you try this patch? It'll locate the bug for us.

OK, applying all of the attached patches, the whole thing works (so,
preemp_count fix, and preempt_disable/enable around those two #defines
w/smp_processor_id).

Thank you all.

--
Stefano RIVOIR

2004-10-05 09:24:09

by Dominik Karall

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

On Monday 04 October 2004 11:02, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc3/2.6
>.9-rc3-mm2/

i get a lot of usb errors on boot. they appear since -rc2-mm1.
below the relevant part of dmesg output. i'm not sure if the "Neighbour table
overflow" messages are also relevant? i didn't get them before in this lan
network i'm now. (but they are here since about 3 months, i thought it
depends on the lan connection, so i didn't report it, but now they are
present on my main lan too):

sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x10c0
ohci1394: $Rev: 1226 $ Ben Collins <[email protected]>
ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 17 (level, low) -> IRQ 17
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[e2427000-e24277ff]
Max
Packet=[2048]
snd: Unknown parameter `device_gid'
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
intel8x0_measure_ac97_clock: measured 49715 usecs
intel8x0: clocking to 48000
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
ohci_hcd 0000:00:03.0: irq 20, pci mem 0xe2420000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller
(#2)
ohci_hcd 0000:00:03.1: irq 21, pci mem 0xe2421000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc001ee09a]
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller
(#3)
ohci_hcd 0000:00:03.2: irq 22, pci mem 0xe2422000
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
usb 2-1: new full speed USB device using address 2
SCSI subsystem initialized
Initializing USB Mass Storage driver...
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 0000:00:03.3: irq 23, pci mem 0xe2423000
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb 2-1: USB disconnect, address 2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
sis900.c: v1.08.07 11/02/2003
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
eth0: Unknown PHY transceiver found at address 0.
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Unknown PHY transceiver found at address 2.
eth0: Unknown PHY transceiver found at address 3.
ohci_hcd 0000:00:03.1: wakeup
eth0: Unknown PHY transceiver found at address 4.
eth0: Unknown PHY transceiver found at address 5.
eth0: Unknown PHY transceiver found at address 6.
eth0: Unknown PHY transceiver found at address 7.
eth0: Unknown PHY transceiver found at address 8.
eth0: Unknown PHY transceiver found at address 9.
eth0: Unknown PHY transceiver found at address 10.
eth0: Unknown PHY transceiver found at address 11.
eth0: Unknown PHY transceiver found at address 12.
eth0: Unknown PHY transceiver found at address 13.
eth0: Unknown PHY transceiver found at address 14.
eth0: Unknown PHY transceiver found at address 15.
eth0: Unknown PHY transceiver found at address 16.
eth0: Unknown PHY transceiver found at address 17.
eth0: Unknown PHY transceiver found at address 18.
eth0: Unknown PHY transceiver found at address 19.
eth0: Unknown PHY transceiver found at address 20.
eth0: Unknown PHY transceiver found at address 21.
eth0: Unknown PHY transceiver found at address 22.
eth0: Unknown PHY transceiver found at address 23.
eth0: Unknown PHY transceiver found at address 24.
eth0: Unknown PHY transceiver found at address 25.
eth0: Unknown PHY transceiver found at address 26.
eth0: Unknown PHY transceiver found at address 27.
eth0: Unknown PHY transceiver found at address 28.
eth0: Unknown PHY transceiver found at address 29.
eth0: Unknown PHY transceiver found at address 30.
eth0: Unknown PHY transceiver found at address 31.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 19, 00:10:ff:af:cd:aa.
usb 2-1: new full speed USB device using address 3
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18
eth1: RealTek RTL8139 at 0xd135a000, 00:50:fc:2d:9a:5c, IRQ 18
eth1: Identified 8139 chip type 'RTL-8139C'
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Linux video capture interface: v1.00
saa7130/34: v4l2 driver version 0.2.12 loaded
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
saa7134[0]: found at 0000:00:08.0, rev: 1, irq: 19, latency: 32, mmio:
0xe242600
0
saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected]
saa7134[0]: board init: gpio is 0
saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9
saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00
saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc0 i2c-bus saa7134[0]
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by saa7134[0]
tda9887: Ignoring new-style parameters in presence of obsolete ones
tda9885/6/7: chip found @ 0x86
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
eth0: Media Link On 100mbps full-duplex
Vendor: Medion Model: Flash XL CF Rev: 2.6D
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
eth0: Media Link On 100mbps full-duplex
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
printk: 64315 messages suppressed.


lspci (only usb part):
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e2420000 (32-bit, non-prefetchable) [size=4K]

0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at e2421000 (32-bit, non-prefetchable) [size=4K]

0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin C routed to IRQ 22
Region 0: Memory at e2422000 (32-bit, non-prefetchable) [size=4K]

0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0
Controller (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max)
Interrupt: pin D routed to IRQ 23
Region 0: Memory at e2423000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-


btw, no usb devices are connected.

best regards,
dominik


Attachments:
(No filename) (11.17 kB)
(No filename) (307.00 B)
Download all attachments

2004-10-05 09:29:34

by Peter Zijlstra

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

On Mon, 2004-10-04 at 19:13, Pasi Savolainen wrote:
> * Andrew Morton <[email protected]>:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc3/2.6.9-rc3-mm2/
> >
> >
> > - Hopefully those x86 compile errors are fixed up.
>
> Are they something like this?
>
> - -
> pvsavola@tienel:~/linu/k25/mm$ uname -a
> Linux tienel 2.6.9-rc3-mm1 #1 SMP Sun Oct 3 16:34:23 EEST 2004 i686 GNU/Linux
> pvsavola@tienel:~/linu/k25/mm$ make -j1 bzImage modules
> CHK include/linux/version.h
> make[1]: `arch/i386/kernel/asm-offsets.s' is up to date.
> CHK include/linux/compile.h
> GEN_INITRAMFS_LIST usr/initramfs_list
> Using shipped usr/initramfs_list
> GEN .version
> CHK include/linux/compile.h
> UPD include/linux/compile.h
> CC init/version.o
> LD init/built-in.o
> LD .tmp_vmlinux1
> KSYM .tmp_kallsyms1.S
> make: *** wait: No child processes. Stop.
> - -
>
> The 'no child processes' keeps on coming up at 'random' moments under
> rc3-mm1. First time ever that I've seen it otherwise.
>

Just a simple mee too!
on 2.6.9-rc3-mm2-VP-T0 and on some earlier Sx patches as well.
Unfortunatly I haven't had time to track back as to when this was
introduced.

Both a P4-HT and a dual athlon have this problem.

Regards,

Peter Zijlstra

2004-10-05 09:35:06

by Peter Zijlstra

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

On Tue, 2004-10-05 at 11:25, Peter Zijlstra wrote:
> On Mon, 2004-10-04 at 19:13, Pasi Savolainen wrote:
> > * Andrew Morton <[email protected]>:
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc3/2.6.9-rc3-mm2/
> > >
> > >
> > > - Hopefully those x86 compile errors are fixed up.
> >
> > Are they something like this?
> >
> > - -
> > pvsavola@tienel:~/linu/k25/mm$ uname -a
> > Linux tienel 2.6.9-rc3-mm1 #1 SMP Sun Oct 3 16:34:23 EEST 2004 i686 GNU/Linux
> > pvsavola@tienel:~/linu/k25/mm$ make -j1 bzImage modules
> > CHK include/linux/version.h
> > make[1]: `arch/i386/kernel/asm-offsets.s' is up to date.
> > CHK include/linux/compile.h
> > GEN_INITRAMFS_LIST usr/initramfs_list
> > Using shipped usr/initramfs_list
> > GEN .version
> > CHK include/linux/compile.h
> > UPD include/linux/compile.h
> > CC init/version.o
> > LD init/built-in.o
> > LD .tmp_vmlinux1
> > KSYM .tmp_kallsyms1.S
> > make: *** wait: No child processes. Stop.
> > - -
> >
> > The 'no child processes' keeps on coming up at 'random' moments under
> > rc3-mm1. First time ever that I've seen it otherwise.
> >
>
> Just a simple mee too!
> on 2.6.9-rc3-mm2-VP-T0 and on some earlier Sx patches as well.
> Unfortunatly I haven't had time to track back as to when this was
> introduced.
>
Oh and it is any big make job, not just kernel compiles.

> Both a P4-HT and a dual athlon have this problem.
>
> Regards,
>
> Peter Zijlstra
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

2004-10-05 12:06:45

by Hugh Dickins

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

On Tue, 5 Oct 2004, Peter Zijlstra wrote:
> On Mon, 2004-10-04 at 19:13, Pasi Savolainen wrote:
> > LD .tmp_vmlinux1
> > KSYM .tmp_kallsyms1.S
> > make: *** wait: No child processes. Stop.
> > - -
> > The 'no child processes' keeps on coming up at 'random' moments under
> > rc3-mm1. First time ever that I've seen it otherwise.
>
> Just a simple mee too!
> on 2.6.9-rc3-mm2-VP-T0 and on some earlier Sx patches as well.
> Unfortunatly I haven't had time to track back as to when this was
> introduced.

Please, would you try this patch below that I posted yesterday?
At the time I thought the trylock was hardly used so not urgent.

I've just now discovered that the standard SMP PREEMPT read_lock
- as in do_wait's read_lock(&tasklist_lock) for example - uses it
via one of those dreaded expansions that grep misses:
if (likely(_raw_##op##_trylock(lock)))

I've been suffering the occasional leftover zombie from multiple
kernel builds precisely since the preempt-smp.patch went in; been
hunting it unsuccessfully in spare moments, yesterday noticed that
bug, today realize it's probably what I've been hunting - I'm
about to start my own tests again, can't be sure until tomorrow.

Hugh

The i386 and x86_64 _raw_read_trylocks in preempt-smp.patch
are too successful: atomic_read() returns a signed integer.

Signed-off-by: Hugh Dickins <[email protected]>

--- 2.6.9-rc3-mm2/include/asm-i386/spinlock.h 2004-10-04 12:00:14.000000000 +0100
+++ linux/include/asm-i386/spinlock.h 2004-10-04 18:50:32.752864600 +0100
@@ -235,7 +235,7 @@ static inline int _raw_read_trylock(rwlo
{
atomic_t *count = (atomic_t *)lock;
atomic_dec(count);
- if (atomic_read(count) < RW_LOCK_BIAS)
+ if (atomic_read(count) >= 0)
return 1;
atomic_inc(count);
return 0;
--- 2.6.9-rc3-mm2/include/asm-x86_64/spinlock.h 2004-10-04 12:00:15.000000000 +0100
+++ linux/include/asm-x86_64/spinlock.h 2004-10-04 18:50:32.752864600 +0100
@@ -236,7 +236,7 @@ static inline int _raw_read_trylock(rwlo
{
atomic_t *count = (atomic_t *)lock;
atomic_dec(count);
- if (atomic_read(count) < RW_LOCK_BIAS)
+ if (atomic_read(count) >= 0)
return 1;
atomic_inc(count);
return 0;

2004-10-05 13:32:40

by Peter Zijlstra

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

On Tue, 2004-10-05 at 14:06, Hugh Dickins wrote:
> On Tue, 5 Oct 2004, Peter Zijlstra wrote:
> > On Mon, 2004-10-04 at 19:13, Pasi Savolainen wrote:
> > > LD .tmp_vmlinux1
> > > KSYM .tmp_kallsyms1.S
> > > make: *** wait: No child processes. Stop.
> > > - -
> > > The 'no child processes' keeps on coming up at 'random' moments under
> > > rc3-mm1. First time ever that I've seen it otherwise.
> >
> > Just a simple mee too!
> > on 2.6.9-rc3-mm2-VP-T0 and on some earlier Sx patches as well.
> > Unfortunatly I haven't had time to track back as to when this was
> > introduced.
>
> Please, would you try this patch below that I posted yesterday?
> At the time I thought the trylock was hardly used so not urgent.
>
So far, so good!

you rule!


Peter Zijlstra

2004-10-05 14:07:27

by Dominik Karall

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

On Monday 04 October 2004 11:02, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc3/2.6
>.9-rc3-mm2/

some more scheduling/preempt problems. following patches were applied:
---
25/include/linux/netfilter_ipv4/ip_conntrack.h~conntrack-preempt-safety-fix
Mon Oct 4 14:36:19 2004
+++ 25-akpm/include/linux/netfilter_ipv4/ip_conntrack.h Mon Oct 4 14:37:02
2004
@@ -311,10 +311,11 @@ struct ip_conntrack_stat
unsigned int expect_delete;
};

-#define CONNTRACK_STAT_INC(count) \
- do { \
- per_cpu(ip_conntrack_stat, get_cpu()).count++; \
- put_cpu(); \
+#define CONNTRACK_STAT_INC(count) \
+ do { \
+ preempt_disable(); \
+ per_cpu(ip_conntrack_stat, smp_processor_id()).count++; \
+ preempt_disable(); \
} while (0)

/* eg. PROVIDES_CONNTRACK(ftp); */
_

--- 25/include/net/neighbour.h~neigh_stat-preempt-fix-fix Mon Oct 4
14:39:22 2004
+++ 25-akpm/include/net/neighbour.h Mon Oct 4 14:39:22 2004
@@ -113,8 +113,9 @@ struct neigh_statistics

#define NEIGH_CACHE_STAT_INC(tbl, field) \
do { \
- (per_cpu_ptr((tbl)->stats, get_cpu())->field)++; \
- put_cpu(); \
+ preempt_disable(); \
+ (per_cpu_ptr((tbl)->stats, smp_processor_id())->field)++; \
+ preempt_enable(); \
} while (0)

struct neighbour
_

i uploaded syslog with panics to http://stud4.tuwien.ac.at/~e0227135/kernel/
the first panic occurred after modprobe ip_conntrack.

best regards,
dominik


Attachments:
(No filename) (2.06 kB)
(No filename) (307.00 B)
Download all attachments

2004-10-05 14:22:26

by Con Kolivas

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Dominik Karall wrote:
> On Monday 04 October 2004 11:02, Andrew Morton wrote:
>
>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc3/2.6
>>.9-rc3-mm2/
>
>
> some more scheduling/preempt problems. following patches were applied:
> + preempt_disable(); \
> + per_cpu(ip_conntrack_stat, smp_processor_id()).count++; \
> + preempt_disable(); \

double preempt_disable looks suspect.

Con

2004-10-05 17:45:57

by Stephane Jourdois

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

On Mon, Oct 04, 2004 at 02:15:32PM +0200, Stephane Jourdois wrote:
> This kernel does not boot on my i386 laptop. I have nothing after
> "Uncompressing kernel... Ok, booting linux". The fans are increasingly
> running, so I suspect cpu is heavily used at this time. I tried to
> wait several minutes, just to see.
>
> I have the same problem since 2.6.9-rc2-mm2. Last booting kernel is
> 2.6.9-rc2-mm1. I tried every -mm kernel between -rc2-mm1 and -rc3-mm2.
>
> #
> # Performance-monitoring counters support
> #
> # CONFIG_PERFCTR is not set
> CONFIG_KEXEC=y
> CONFIG_CRASH_DUMP=y
> CONFIG_BACKUP_BASE=16
> CONFIG_BACKUP_SIZE=32

Answering to myself :

disable kexec.

Sorry for the noise.

--
/// Stephane Jourdois /"\ ASCII RIBBON CAMPAIGN \\\
((( Ing?nieur d?veloppement \ / AGAINST HTML MAIL )))
\\\ 24 rue Cauchy X ///
\\\ 75015 Paris / \ +33 6 8643 3085 ///

2004-10-05 23:42:46

by Ed Tomlinson

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2 ip_conntrack problems

On Monday 04 October 2004 20:08, Andrew Morton wrote:
> Ed Tomlinson <[email protected]> wrote:
> >
> > Has anyone figured out how to fix this one (9-rc3-mm1 compiled ok).
> >
> > CC [M] net/ipv4/netfilter/ip_conntrack_standalone.o
> > net/ipv4/netfilter/ip_conntrack_standalone.c:34:47: linux/netfilter_ipv4/ip_conntrack.h: No such file or directory
>
> Works for me. Perhaps you're missing that file?

Yes (egg on face). bk -r get -qS fixes it.

The startup hangs at the same place rc2-mm1 did. Disabling APCI does not help. Recient mm build only
work if APCI is enabled here.

Here is a sysrq-t of the hang

Ed

Oct 5 16:59:32 bert kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Oct 5 16:59:32 bert kernel: apm: disabled on user request.
Oct 5 16:59:37 bert Xprt_64: Xprint server pid=1518 done, exitcode=0.
Oct 5 16:59:40 bert kernel: Kernel logging (proc) stopped.
Oct 5 16:59:40 bert kernel: Kernel log daemon terminating.
Oct 5 16:59:40 bert exiting on signal 15
Oct 5 17:01:51 bert syslogd 1.4.1#15: restart.
Oct 5 17:01:52 bert kernel: klogd 1.4.1#15, log source = /proc/kmsg started.
Oct 5 17:01:52 bert kernel: Inspecting /boot/System.map-2.6.9-rc3-mm2
Oct 5 17:01:52 bert kernel: Loaded 24641 symbols from /boot/System.map-2.6.9-rc3-mm2.
Oct 5 17:01:52 bert kernel: Symbols match kernel version 2.6.9.
Oct 5 17:01:52 bert kernel: No module symbols loaded - kernel modules not enabled.
Oct 5 17:01:52 bert kernel: Linux version 2.6.9-rc3-mm2 (knoppix@bert) (gcc version 3.4.2 (Debian 3.4.2-2)) #1 Tue Oct 5 06:20:23 EDT 2004
Oct 5 17:01:52 bert kernel: BIOS-provided physical RAM map:
Oct 5 17:01:52 bert kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Oct 5 17:01:52 bert kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Oct 5 17:01:52 bert kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Oct 5 17:01:52 bert kernel: BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
Oct 5 17:01:52 bert kernel: BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Oct 5 17:01:52 bert kernel: 512MB LOWMEM available.
Oct 5 17:01:52 bert kernel: DMI 2.1 present.
Oct 5 17:01:52 bert kernel: ACPI: PM-Timer IO Port: 0xf808
Oct 5 17:01:52 bert kernel: Built 1 zonelists
Oct 5 17:01:52 bert kernel: Initializing CPU#0
Oct 5 17:01:52 bert kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=303 apm=power-off
Oct 5 17:01:52 bert kernel: CPU 0 irqstacks, hard=c0395000 soft=c0394000
Oct 5 17:01:52 bert kernel: PID hash table entries: 4096 (order: 12, 65536 bytes)
Oct 5 17:01:52 bert kernel: Detected 1394.141 MHz processor.
Oct 5 17:01:52 bert kernel: Using pmtmr for high-res timesource
Oct 5 17:01:52 bert kernel: Console: colour VGA+ 80x25
Oct 5 17:01:52 bert kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 5 17:01:52 bert kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 5 17:01:52 bert kernel: Memory: 516068k/524288k available (1772k kernel code, 7776k reserved, 715k data, 128k init, 0k highmem)
Oct 5 17:01:52 bert kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Oct 5 17:01:52 bert kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 5 17:01:52 bert kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 5 17:01:52 bert kernel: CPU: L2 cache: 256K
Oct 5 17:01:52 bert kernel: Intel machine check architecture supported.
Oct 5 17:01:52 bert kernel: Intel machine check reporting enabled on CPU#0.
Oct 5 17:01:52 bert kernel: CPU: Intel(R) Celeron(TM) CPU 1400MHz stepping 04
Oct 5 17:01:52 bert kernel: Enabling fast FPU save and restore... done.
Oct 5 17:01:52 bert kernel: Enabling unmasked SIMD FPU exception support... done.
Oct 5 17:01:52 bert kernel: Checking 'hlt' instruction... OK.
Oct 5 17:01:52 bert kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
Oct 5 17:01:52 bert kernel: NET: Registered protocol family 16
Oct 5 17:01:52 bert kernel: PCI: PCI BIOS revision 2.10 entry at 0xed880, last bus=1
Oct 5 17:01:52 bert kernel: PCI: Using configuration type 1
Oct 5 17:01:52 bert kernel: mtrr: v2.0 (20020519)
Oct 5 17:01:52 bert kernel: ACPI: Subsystem revision 20040816
Oct 5 17:01:52 bert kernel: ACPI: Interpreter enabled
Oct 5 17:01:52 bert kernel: ACPI: Using PIC for interrupt routing
Oct 5 17:01:52 bert kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
Oct 5 17:01:52 bert kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11)
Oct 5 17:01:52 bert kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11)
Oct 5 17:01:52 bert kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11)
Oct 5 17:01:52 bert kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Oct 5 17:01:52 bert kernel: PCI: Probing PCI hardware (bus 00)
Oct 5 17:01:52 bert kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 5 17:01:52 bert kernel: PnPBIOS: Scanning system for PnP BIOS support...
Oct 5 17:01:52 bert kernel: PnPBIOS: Found PnP BIOS installation structure at 0xc00fef70
Oct 5 17:01:52 bert kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x604e, dseg 0xf0000
Oct 5 17:01:52 bert kernel: PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
Oct 5 17:01:52 bert kernel: usbcore: registered new driver usbfs
Oct 5 17:01:52 bert kernel: usbcore: registered new driver hub
Oct 5 17:01:52 bert kernel: PCI: Using ACPI for IRQ routing
Oct 5 17:01:52 bert kernel: ** PCI interrupts are no longer routed automatically. If this
Oct 5 17:01:52 bert kernel: ** causes a device to stop working, it is probably because the
Oct 5 17:01:52 bert kernel: ** driver failed to call pci_enable_device(). As a temporary
Oct 5 17:01:52 bert kernel: ** workaround, the "pci=routeirq" argument restores the old
Oct 5 17:01:52 bert kernel: ** behavior. If this argument makes the device work again,
Oct 5 17:01:52 bert kernel: ** please email the output of "lspci" to [email protected]
Oct 5 17:01:52 bert kernel: ** so I can fix the driver.
Oct 5 17:01:52 bert kernel: pnp: 00:12: ioport range 0x15c-0x15d has been reserved
Oct 5 17:01:52 bert kernel: pnp: 00:12: ioport range 0x4d0-0x4d1 has been reserved
Oct 5 17:01:52 bert kernel: pnp: 00:13: ioport range 0xf800-0xf81f could not be reserved
Oct 5 17:01:52 bert kernel: pnp: 00:13: ioport range 0xf820-0xf83f has been reserved
Oct 5 17:01:52 bert kernel: pnp: 00:13: ioport range 0xfc00-0xfc0f has been reserved
Oct 5 17:01:52 bert kernel: Initializing Cryptographic API
Oct 5 17:01:52 bert kernel: Limiting direct PCI/PCI transfers.
Oct 5 17:01:52 bert kernel: isapnp: Scanning for PnP cards...
Oct 5 17:01:52 bert kernel: isapnp: No Plug & Play device found
Oct 5 17:01:52 bert kernel: ACPI: PS/2 Keyboard Controller [KBD] at I/O 0x60, 0x64, irq 1
Oct 5 17:01:52 bert kernel: ACPI: PS/2 Mouse Controller [PS2M] at irq 12
Oct 5 17:01:52 bert kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 5 17:01:52 bert kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 5 17:01:52 bert kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Oct 5 17:01:52 bert kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 5 17:01:52 bert kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
Oct 5 17:01:52 bert kernel: io scheduler noop registered
Oct 5 17:01:52 bert kernel: io scheduler anticipatory registered
Oct 5 17:01:52 bert kernel: io scheduler deadline registered
Oct 5 17:01:52 bert kernel: io scheduler cfq registered
Oct 5 17:01:52 bert kernel: Compaq SMART2 Driver (v 2.6.0)
Oct 5 17:01:52 bert kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 5 17:01:52 bert kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 5 17:01:52 bert kernel: PIIX4: IDE controller at PCI slot 0000:00:14.1
Oct 5 17:01:52 bert kernel: PIIX4: chipset revision 1
Oct 5 17:01:52 bert kernel: PIIX4: not 100%% native mode: will probe irqs later
Oct 5 17:01:52 bert kernel: ide0: BM-DMA at 0x10e0-0x10e7, BIOS settings: hda:DMA, hdb:pio
Oct 5 17:01:52 bert kernel: ide1: BM-DMA at 0x10e8-0x10ef, BIOS settings: hdc:DMA, hdd:DMA
Oct 5 17:01:52 bert kernel: hda: Maxtor 6Y080L0, ATA DISK drive
Oct 5 17:01:52 bert kernel: elevator: using anticipatory as default io scheduler
Oct 5 17:01:52 bert kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 5 17:01:52 bert kernel: hdc: HL-DT-ST RW/DVD GCC-4480B, ATAPI CD/DVD-ROM drive
Oct 5 17:01:52 bert kernel: hdd: HP COLORADO 20GB, ATAPI TAPE drive
Oct 5 17:01:52 bert kernel: ide1 at 0x170-0x177,0x376 on irq 15
Oct 5 17:01:52 bert kernel: hda: max request size: 128KiB
Oct 5 17:01:52 bert kernel: hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
Oct 5 17:01:52 bert kernel: hda: hda1 hda2 hda3 hda4 < hda5 >
Oct 5 17:01:52 bert kernel: USB Universal Host Controller Interface driver v2.2
Oct 5 17:01:52 bert kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
Oct 5 17:01:52 bert kernel: PCI: setting IRQ 10 as level-triggered
Oct 5 17:01:52 bert kernel: ACPI: PCI interrupt 0000:00:14.2[D] -> GSI 10 (level, low) -> IRQ 10
Oct 5 17:01:52 bert kernel: uhci_hcd 0000:00:14.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
Oct 5 17:01:52 bert kernel: uhci_hcd 0000:00:14.2: irq 10, io base 0x10c0
Oct 5 17:01:52 bert kernel: uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
Oct 5 17:01:52 bert kernel: hub 1-0:1.0: USB hub found
Oct 5 17:01:52 bert kernel: hub 1-0:1.0: 2 ports detected
Oct 5 17:01:52 bert kernel: Badness in remove_proc_entry at fs/proc/generic.c:688
Oct 5 17:01:52 bert kernel: [dump_stack+23/32] dump_stack+0x17/0x20
Oct 5 17:01:52 bert kernel: [remove_proc_entry+341/352] remove_proc_entry+0x155/0x160
Oct 5 17:01:52 bert kernel: [uhci_hcd_init+236/272] uhci_hcd_init+0xec/0x110
Oct 5 17:01:52 bert kernel: [do_initcalls+87/192] do_initcalls+0x57/0xc0
Oct 5 17:01:52 bert kernel: [init+50/272] init+0x32/0x110
Oct 5 17:01:52 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:01:52 bert kernel: mice: PS/2 mouse device common for all mice
Oct 5 17:01:52 bert kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Oct 5 17:01:52 bert kernel: usb 1-1: new low speed USB device using address 2
Oct 5 17:01:52 bert kernel: c024e172
Oct 5 17:01:52 bert kernel: PREEMPT
Oct 5 17:01:52 bert kernel: Modules linked in:
Oct 5 17:01:52 bert kernel: CPU: 0
Oct 5 17:01:52 bert kernel: EIP: 0060:[uhci_alloc_urb_priv+50/144] Not tainted VLI
Oct 5 17:01:52 bert kernel: EFLAGS: 00010006 (2.6.9-rc3-mm2)
Oct 5 17:01:52 bert kernel: EIP is at uhci_alloc_urb_priv+0x32/0x90
Oct 5 17:01:52 bert kernel: eax: 00000000 ebx: 00000003 ecx: 0000000b edx: c17ed000
Oct 5 17:01:52 bert kernel: esi: c17cb8c0 edi: 00000003 ebp: c1731d98 esp: c1731d88
Oct 5 17:01:52 bert kernel: ds: 007b es: 007b ss: 0068
Oct 5 17:01:52 bert kernel: Process khubd (pid: 39, threadinfo=c1731000 task=c1728b30)
Oct 5 17:01:52 bert kernel: Stack: c14eec00 fffffff4 c17cb8c0 c14eec00 c1731dbc c024f08a c01c12c2 c17ed000
Oct 5 17:01:52 bert kernel: 00000000 00000286 c02c2ca0 c17cb8c0 c14eec00 c1731de0 c0242a80 0000900d
Oct 5 17:01:52 bert kernel: 00000246 c17d1a20 00000010 00000008 c17ed000 00000002 c1731e04 c0243429
Oct 5 17:01:52 bert kernel: Call Trace:
Oct 5 17:01:52 bert kernel: [show_stack+122/144] show_stack+0x7a/0x90
Oct 5 17:01:52 bert kernel: [show_registers+329/448] show_registers+0x149/0x1c0
Oct 5 17:01:52 bert kernel: [die+221/368] die+0xdd/0x170
Oct 5 17:01:52 bert kernel: [do_page_fault+1095/1561] do_page_fault+0x447/0x619
Oct 5 17:01:52 bert kernel: [error_code+45/56] error_code+0x2d/0x38
Oct 5 17:01:52 bert kernel: [uhci_urb_enqueue+106/608] uhci_urb_enqueue+0x6a/0x260
Oct 5 17:01:52 bert kernel: [hcd_submit_urb+272/400] hcd_submit_urb+0x110/0x190
Oct 5 17:01:52 bert kernel: [usb_submit_urb+425/592] usb_submit_urb+0x1a9/0x250
Oct 5 17:01:52 bert kernel: [usb_start_wait_urb+67/208] usb_start_wait_urb+0x43/0xd0
Oct 5 17:01:52 bert kernel: [usb_internal_control_msg+96/128] usb_internal_control_msg+0x60/0x80
Oct 5 17:01:52 bert kernel: [usb_control_msg+133/160] usb_control_msg+0x85/0xa0
Oct 5 17:01:52 bert kernel: [hub_set_address+90/128] hub_set_address+0x5a/0x80
Oct 5 17:01:52 bert kernel: [hub_port_init+384/880] hub_port_init+0x180/0x370
Oct 5 17:01:52 bert kernel: [hub_port_connect_change+194/944] hub_port_connect_change+0xc2/0x3b0
Oct 5 17:01:52 bert kernel: [hub_events+471/896] hub_events+0x1d7/0x380
Oct 5 17:01:52 bert kernel: [hub_thread+53/240] hub_thread+0x35/0xf0
Oct 5 17:01:52 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:01:52 bert kernel: Code: 45 f0 a1 c4 30 3b c0 89 75 f8 89 d6 ba 20 00 00 00 89 5d f4 89 7d fc e8 1d ff ee ff 89 c3 31 c0 85 db 74 4b b9 0b 00 00 00 89 df <f3> ab a1 c0 7f 2f c0 89 43 1c a1 c0 7f 2f c0 89 73 08 89 5b 04
Oct 5 17:01:52 bert kernel: <6>note: khubd[39] exited with preempt_count 1
Oct 5 17:01:52 bert kernel: input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Oct 5 17:01:52 bert kernel: NET: Registered protocol family 2
Oct 5 17:01:52 bert kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Oct 5 17:01:52 bert kernel: TCP: Hash tables configured (established 131072 bind 65536)
Oct 5 17:01:52 bert kernel: NET: Registered protocol family 1
Oct 5 17:01:52 bert kernel: NET: Registered protocol family 15
Oct 5 17:01:52 bert kernel: ReiserFS: hda3: found reiserfs format "3.6" with standard journal
Oct 5 17:01:52 bert kernel: ReiserFS: hda3: using ordered data mode
Oct 5 17:01:52 bert kernel: ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct 5 17:01:52 bert kernel: ReiserFS: hda3: checking transaction log (hda3)
Oct 5 17:01:52 bert kernel: ReiserFS: hda3: Using r5 hash to sort names
Oct 5 17:01:52 bert kernel: VFS: Mounted root (reiserfs filesystem) readonly.
Oct 5 17:01:52 bert kernel: Freeing unused kernel memory: 128k freed
Oct 5 17:01:52 bert kernel: Adding 976744k swap on /dev/hda2. Priority:-1 extents:1
Oct 5 17:01:52 bert kernel: Real Time Clock Driver v1.12
Oct 5 17:01:52 bert kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Oct 5 17:01:52 bert kernel: apm: overridden by ACPI.
Oct 5 17:01:52 bert kernel: NET: Registered protocol family 17
Oct 5 17:01:52 bert kernel: e100: Intel(R) PRO/100 Network Driver, 3.1.4-k2-NAPI
Oct 5 17:01:52 bert kernel: e100: Copyright(c) 1999-2004 Intel Corporation
Oct 5 17:01:52 bert kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Oct 5 17:01:52 bert kernel: PCI: setting IRQ 11 as level-triggered
Oct 5 17:01:52 bert kernel: ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
Oct 5 17:01:52 bert kernel: e100: eth0: e100_probe: addr 0x40b00000, irq 11, MAC addr 00:08:C7:08:27:CE
Oct 5 17:01:52 bert kernel: input: PC Speaker
Oct 5 17:01:52 bert kernel: device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [email protected]
Oct 5 17:01:52 bert kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Oct 5 17:01:52 bert kernel: warning: process `update' used the obsolete bdflush system call
Oct 5 17:01:52 bert kernel: Fix your initscripts?
Oct 5 17:01:52 bert kernel: SCSI subsystem initialized
Oct 5 17:01:52 bert kernel: kjournald starting. Commit interval 5 seconds
Oct 5 17:01:52 bert kernel: EXT3 FS on hda1, internal journal
Oct 5 17:01:52 bert kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 5 17:01:52 bert kernel: ReiserFS: hda5: found reiserfs format "3.6" with standard journal
Oct 5 17:01:52 bert kernel: ReiserFS: hda5: using ordered data mode
Oct 5 17:01:52 bert kernel: ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct 5 17:01:52 bert kernel: ReiserFS: hda5: checking transaction log (hda5)
Oct 5 17:01:52 bert kernel: ReiserFS: hda5: Using r5 hash to sort names
Oct 5 17:01:52 bert kernel: Badness in enable_irq at kernel/irq/manage.c:106
Oct 5 17:01:52 bert kernel: [dump_stack+23/32] dump_stack+0x17/0x20
Oct 5 17:01:52 bert kernel: [enable_irq+178/208] enable_irq+0xb2/0xd0
Oct 5 17:01:52 bert kernel: [pg0+542801987/1069822976] e100_up+0x143/0x200 [e100]
Oct 5 17:01:52 bert kernel: [pg0+542806281/1069822976] e100_open+0x29/0x80 [e100]
Oct 5 17:01:52 bert kernel: [dev_open+116/144] dev_open+0x74/0x90
Oct 5 17:01:52 bert kernel: [dev_change_flags+82/288] dev_change_flags+0x52/0x120
Oct 5 17:01:52 bert kernel: [devinet_ioctl+1516/1696] devinet_ioctl+0x5ec/0x6a0
Oct 5 17:01:52 bert kernel: [inet_ioctl+192/208] inet_ioctl+0xc0/0xd0
Oct 5 17:01:52 bert kernel: [sock_ioctl+446/672] sock_ioctl+0x1be/0x2a0
Oct 5 17:01:52 bert kernel: [sys_ioctl+468/560] sys_ioctl+0x1d4/0x230
Oct 5 17:01:52 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:01:52 bert kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Oct 5 17:01:52 bert kernel: nfs warning: mount version older than kernel
Oct 5 17:01:52 bert last message repeated 2 times
Oct 5 17:01:52 bert kernel: reset at 0x220 failed!!!
Oct 5 17:01:52 bert kernel: reset at 0x220 failed!!!
Oct 5 17:01:52 bert kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Oct 5 17:01:52 bert kernel: apm: disabled on user request.
Oct 5 17:01:53 bert dhcpd: Internet Systems Consortium DHCP Server V3.0.1
Oct 5 17:01:53 bert dhcpd: Copyright 2004 Internet Systems Consortium.
Oct 5 17:01:53 bert dhcpd: All rights reserved.
Oct 5 17:01:53 bert dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Oct 5 17:01:53 bert dhcpd: Wrote 0 leases to leases file.
Oct 5 17:01:53 bert dhcpd:
Oct 5 17:01:58 bert xfs: ignoring font path element /usr/lib/X11/fonts/CID (unreadable)
Oct 5 17:01:59 bert kernel: parport: PnPBIOS parport detected.
Oct 5 17:01:59 bert kernel: parport0: PC-style at 0x378 (0x778), irq 9, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Oct 5 17:01:59 bert kernel: parport0: irq 9 in use, resorting to polled operation
Oct 5 17:01:59 bert isapnp.rc[1569]: parport_pc: loaded sucessfully
Oct 5 17:01:59 bert kernel: inserting floppy driver for 2.6.9-rc3-mm2
Oct 5 17:01:59 bert kernel: ACPI: Floppy Controller [FDC0] at I/O 0x3f0-0x3f5 irq 6 dma channel 2
Oct 5 17:01:59 bert kernel: ACPI: [FDC0] doesn't declare FD_DCR; also claiming 0x3f7
Oct 5 17:01:59 bert kernel: Floppy drive(s): fd0 is 1.44M
Oct 5 17:01:59 bert kernel: FDC 0 is a National Semiconductor PC87306
Oct 5 17:01:59 bert isapnp.rc[1569]: floppy: loaded sucessfully
Oct 5 17:02:00 bert isapnp.rc[1569]: pcspkr: loaded sucessfully
Oct 5 17:02:00 bert isapnp.rc[1569]: rtc: loaded sucessfully
Oct 5 17:02:00 bert kernel: Linux agpgart interface v0.100 (c) Dave Jones
Oct 5 17:02:00 bert kernel: agpgart: Detected an Intel 440BX Chipset.
Oct 5 17:02:00 bert kernel: agpgart: Maximum main memory to use for agp memory: 440M
Oct 5 17:02:00 bert kernel: agpgart: AGP aperture is 64M @ 0x44000000
Oct 5 17:02:00 bert pci.agent[1692]: intel-agp: loaded successfully
Oct 5 17:02:00 bert pci.agent[1751]: e100: already loaded
Oct 5 17:02:00 bert kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Oct 5 17:02:00 bert kernel: ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 10 (level, low) -> IRQ 10
Oct 5 17:02:01 bert pci.agent[1779]: snd-emu10k1: loaded successfully
Oct 5 17:02:01 bert kernel: gameport: pci0000:00:0e.1 speed 1217 kHz
Oct 5 17:02:01 bert pci.agent[1881]: emu10k1-gp: loaded successfully
Oct 5 17:02:01 bert kernel: ohci1394: $Rev: 1226 $ Ben Collins <[email protected]>
Oct 5 17:02:01 bert kernel: ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 10 (level, low) -> IRQ 10
Oct 5 17:02:01 bert kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[40a00000-40a007ff] Max Packet=[2048]
Oct 5 17:02:01 bert pci.agent[1917]: ohci1394: loaded successfully
Oct 5 17:02:02 bert kernel: piix4_smbus 0000:00:14.3: Found 0000:00:14.3 device
Oct 5 17:02:02 bert pci.agent[2018]: i2c-piix4: loaded successfully
Oct 5 17:02:02 bert pci.rc[1681]: ignoring pci display device on 01:00.0
Oct 5 17:03:54 bert kernel: SysRq : Show State
Oct 5 17:03:54 bert kernel:
Oct 5 17:03:54 bert kernel: sibling
Oct 5 17:03:54 bert kernel: task PC pid father child younger older
Oct 5 17:03:54 bert kernel: init S C02FAD80 0 1 0 2 (NOTLB)
Oct 5 17:03:54 bert kernel: c151ceb4 00000086 00000246 c02fad80 c13f7200 00000000 c02faca4 00000000
Oct 5 17:03:54 bert kernel: 000000d8 00000000 c013968a c151cee0 c016122c c151c000 dfe88090 00000000
Oct 5 17:03:54 bert kernel: c151cec8 07435d80 000f421d c039a180 c15415f0 c15417cc fffdc8ce c151cec8
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+87/176] schedule_timeout+0x57/0xb0
Oct 5 17:03:54 bert kernel: [do_select+614/688] do_select+0x266/0x2b0
Oct 5 17:03:54 bert kernel: [sys_select+577/1264] sys_select+0x241/0x4f0
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: ksoftirqd/0 S C151FF70 0 2 1 3 (L-TLB)
Oct 5 17:03:54 bert kernel: c151ffb4 00000046 c1541080 c151ff70 c02b93a5 00000000 00000011 c1541080
Oct 5 17:03:54 bert kernel: 00000000 00000000 ffffffff 00000086 c151cee4 00000000 00000000 ffffffff
Oct 5 17:03:54 bert kernel: c0113e47 121b4180 000f41fc c039a180 c1541080 c154125c c151f000 c151f000
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [ksoftirqd+179/192] ksoftirqd+0xb3/0xc0
Oct 5 17:03:54 bert kernel: [kthread+138/208] kthread+0x8a/0xd0
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: events/0 R running 0 3 1 4 2 (L-TLB)
Oct 5 17:03:54 bert kernel: khelper S C0127A40 0 4 1 5 3 (L-TLB)
Oct 5 17:03:54 bert kernel: c1524f3c 00000046 c0127a40 c0127a40 00000000 dd695e40 00000000 00000000
Oct 5 17:03:54 bert kernel: 000001f9 00000000 0000007b 0000007b c15176f8 00000001 00000003 c1524000
Oct 5 17:03:54 bert kernel: 00000000 80bf0fc0 000f4203 c039a180 c15405a0 c154077c dd695e00 00000292
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [worker_thread+536/608] worker_thread+0x218/0x260
Oct 5 17:03:54 bert kernel: [kthread+138/208] kthread+0x8a/0xd0
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: kthread S C1540030 0 5 1 6 51 4 (L-TLB)
Oct 5 17:03:54 bert kernel: c152ff3c 00000046 00000000 c1540030 c0113e00 00000000 00000000 00000000
Oct 5 17:03:54 bert kernel: 00000000 00000000 00000001 c1540030 c152a5d8 00000001 00000003 c152f000
Oct 5 17:03:54 bert kernel: 00000000 8526b700 000f4200 c039a180 c1540030 c154020c dff72de4 00000292
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [worker_thread+536/608] worker_thread+0x218/0x260
Oct 5 17:03:54 bert kernel: [kthread+138/208] kthread+0x8a/0xd0
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: kacpid S 00800000 0 6 5 38 (L-TLB)
Oct 5 17:03:54 bert kernel: c159af3c 00000046 c01124c9 00800000 00000000 00000000 d5c5ebbf 01000000
Oct 5 17:03:54 bert kernel: 00000000 00000000 a91c9008 00010000 c159a000 c1729610 c159a000 c159af3c
Oct 5 17:03:54 bert kernel: c0124d9c 41d88c40 000f41fa c039a180 c1729610 c17297ec c159a000 c151cf28
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [worker_thread+536/608] worker_thread+0x218/0x260
Oct 5 17:03:54 bert kernel: [kthread+138/208] kthread+0x8a/0xd0
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: kblockd/0 S C03AE920 0 38 5 49 6 (L-TLB)
Oct 5 17:03:54 bert kernel: c15a1f3c 00000046 c15a1000 c03ae920 c15a1f18 c023208c c17c4da0 c17c4da0
Oct 5 17:03:54 bert kernel: 00000021 00000000 ffffffff c14e8840 c172af38 00000001 00000003 c15a1000
Oct 5 17:03:54 bert kernel: 00000000 b63c2f00 000f420f c039a180 c17290a0 c172927c c17c4e20 00000246
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [worker_thread+536/608] worker_thread+0x218/0x260
Oct 5 17:03:54 bert kernel: [kthread+138/208] kthread+0x8a/0xd0
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: pdflush S 00000002 0 49 5 50 38 (L-TLB)
Oct 5 17:03:54 bert kernel: c1732f7c 00000046 c15405a0 00000002 521e3280 000f41fa c039a180 c17285c0
Oct 5 17:03:54 bert kernel: 00000000 00000000 ffffffff c17285c0 c1732f5c c02b93a5 00000000 00000011
Oct 5 17:03:54 bert kernel: c17285c0 53ba2f40 000f41fa c039a180 c17285c0 c172879c c1732000 c1732fa8
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [__pdflush+160/496] __pdflush+0xa0/0x1f0
Oct 5 17:03:54 bert kernel: [pdflush+30/32] pdflush+0x1e/0x20
Oct 5 17:03:54 bert kernel: [kthread+138/208] kthread+0x8a/0xd0
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: pdflush S C013AC6C 0 50 5 52 49 (L-TLB)
Oct 5 17:03:54 bert kernel: c173af7c 00000046 c173af7c c013ac6c fffd3721 0000cccc 00000000 00000000
Oct 5 17:03:54 bert kernel: 000000c4 00000000 00000000 00000000 00000000 00000000 00000000 00000005
Oct 5 17:03:54 bert kernel: 00000000 7e96f640 000f421c c039a180 c1728050 c172822c 00000000 c173afa8
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [__pdflush+160/496] __pdflush+0xa0/0x1f0
Oct 5 17:03:54 bert kernel: [pdflush+30/32] pdflush+0x1e/0x20
Oct 5 17:03:54 bert kernel: [kthread+138/208] kthread+0x8a/0xd0
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: aio/0 S 00800000 0 52 5 665 50 (L-TLB)
Oct 5 17:03:54 bert kernel: c1742f3c 00000046 c01124c9 00800000 00000000 00000000 c7f5ffff 01000000
Oct 5 17:03:54 bert kernel: 00000000 00000000 bb5eb22c 00010000 c1742000 c176b0c0 c1742000 c1742f3c
Oct 5 17:03:54 bert kernel: c0124d9c 521e3280 000f41fa c039a180 c176b0c0 c176b29c c1742000 c151cf2c
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [worker_thread+536/608] worker_thread+0x218/0x260
Oct 5 17:03:54 bert kernel: [kthread+138/208] kthread+0x8a/0xd0
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: kswapd0 S C176B630 0 51 1 635 5 (L-TLB)
Oct 5 17:03:54 bert kernel: c173bf88 00000046 00000000 c176b630 00000001 00000002 c173bf50 c0128a78
Oct 5 17:03:54 bert kernel: 01000000 00000000 00000000 c02fa120 c173bf60 c0121c74 c173b000 c173bf70
Oct 5 17:03:54 bert kernel: c0119f01 53ba2f40 000f41fa c039a180 c176b630 c176b80c c173b000 c02faf3c
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [kswapd+163/208] kswapd+0xa3/0xd0
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: kseriod S C176A5E0 0 635 1 952 51 (L-TLB)
Oct 5 17:03:54 bert kernel: c1789f90 00000046 00000000 c176a5e0 00000001 00000002 c1789f58 c0128a78
Oct 5 17:03:54 bert kernel: 01000000 00000000 00000000 c02fa120 c1789f68 c0121c74 c1789000 c1789f78
Oct 5 17:03:54 bert kernel: c0119f01 6910d4c0 000f41fa c039a180 c176a5e0 c176a7bc c1789000 c1789000
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [serio_thread+150/272] serio_thread+0x96/0x110
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: reiserfs/0 S 00000001 0 665 5 1026 52 (L-TLB)
Oct 5 17:03:54 bert kernel: dfe54f3c 00000046 00000000 00000001 00000000 00000c6e 00000003 00000000
Oct 5 17:03:54 bert kernel: 0000014d 00000000 00000000 00000000 c17fda58 00000001 00000003 dfe54000
Oct 5 17:03:54 bert kernel: 00000000 b60e6840 000f420f c039a180 c176a070 c176a24c e081211c 00000246
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [worker_thread+536/608] worker_thread+0x218/0x260
Oct 5 17:03:54 bert kernel: [kthread+138/208] kthread+0x8a/0xd0
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: kjournald S 3639B1FF 0 952 1 1018 635 (L-TLB)
Oct 5 17:03:54 bert kernel: df606f64 00000046 c0118a85 3639b1ff 00002b7f 00002b7f df606000 df606f3c
Oct 5 17:03:54 bert kernel: 00000000 00000000 ffffffff 00000286 c1503424 00000001 00000003 df606000
Oct 5 17:03:54 bert kernel: 00000000 25128b80 000f4202 c039a180 df8d0110 df8d02ec df606000 c15033e0
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [pg0+542709087/1069822976] kjournald+0x22f/0x250 [jbd]
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: portmap S 00000000 0 1018 1 1027 952 (NOTLB)
Oct 5 17:03:54 bert kernel: df65bf14 00000086 00000020 00000000 00001fc0 00000001 00000000 df8d1160
Oct 5 17:03:54 bert kernel: 00000b47 00000000 00000000 000000d0 df65bf34 00000000 df54d560 df65bfa0
Oct 5 17:03:54 bert kernel: df65bef8 91413f40 000f4202 c039a180 df8d1160 df8d133c 00000000 7fffffff
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+162/176] schedule_timeout+0xa2/0xb0
Oct 5 17:03:54 bert kernel: [do_poll+148/192] do_poll+0x94/0xc0
Oct 5 17:03:54 bert kernel: [sys_poll+406/560] sys_poll+0x196/0x230
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: rpciod/0 S 00800000 0 1026 5 665 (L-TLB)
Oct 5 17:03:54 bert kernel: df262f3c 00000046 c01124c9 00800000 00000000 00000000 df262f00 01000000
Oct 5 17:03:54 bert kernel: 00000000 00000000 df262f94 00010000 df262000 dfe890e0 df262000 df262f3c
Oct 5 17:03:54 bert kernel: c0124d9c 8526b700 000f4200 c039a180 dfe890e0 dfe892bc df262000 dff72e2c
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [worker_thread+536/608] worker_thread+0x218/0x260
Oct 5 17:03:54 bert kernel: [kthread+138/208] kthread+0x8a/0xd0
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: lockd S 00000000 0 1027 1 1235 1018 (L-TLB)
Oct 5 17:03:54 bert kernel: df8aaf10 00000046 00000000 00000000 0011709d 00000000 df8aaefc c01124c9
Oct 5 17:03:54 bert kernel: 0005ba7b 00000000 00000000 00000331 004ac4e2 00000000 00000000 00000000
Oct 5 17:03:54 bert kernel: c1728b30 8535f940 000f4200 c039a180 dfe88b70 dfe88d4c c14fc400 7fffffff
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+162/176] schedule_timeout+0xa2/0xb0
Oct 5 17:03:54 bert kernel: [pg0+544038087/1069822976] svc_recv+0x437/0x560 [sunrpc]
Oct 5 17:03:54 bert kernel: [pg0+544142057/1069822976] lockd+0x129/0x290 [lockd]
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: rc S DFE5BEE8 0 1235 1 1554 1251 1027 (NOTLB)
Oct 5 17:03:54 bert kernel: dfe5bf18 00000086 dfe636a0 dfe5bee8 c0144daf df4f03c0 dfe97080 1f224065
Oct 5 17:03:54 bert kernel: 0000dfaf 00000000 dfe636a0 dfe636cc df847ac4 dfe5bfb4 c0110a8a 00000001
Oct 5 17:03:54 bert kernel: ffffffff a177a340 000f4202 c039a180 df8d16d0 df8d18ac dfe5b000 00000004
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [do_wait+582/1200] do_wait+0x246/0x4b0
Oct 5 17:03:54 bert kernel: [sys_waitpid+37/39] sys_waitpid+0x25/0x27
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: syslogd S C02FACA4 0 1251 1 1254 1235 (NOTLB)
Oct 5 17:03:54 bert kernel: df248eb4 00000086 00000000 c02faca4 00000000 00000001 df248eac c013968a
Oct 5 17:03:54 bert kernel: 00000151 00000000 df248ea0 c0122535 00000001 00000000 df26f7b0 00000010
Oct 5 17:03:54 bert kernel: c02faeec e211e180 000f421c c039a180 df26f7b0 df26f98c 00000000 7fffffff
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+162/176] schedule_timeout+0xa2/0xb0
Oct 5 17:03:54 bert kernel: [do_select+614/688] do_select+0x266/0x2b0
Oct 5 17:03:54 bert kernel: [sys_select+577/1264] sys_select+0x241/0x4f0
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: klogd R running 0 1254 1 1355 1251 (NOTLB)
Oct 5 17:03:54 bert kernel: automount S C013968A 0 1355 1 1361 1254 (NOTLB)
Oct 5 17:03:54 bert kernel: dffbff14 00000086 dffbfefc c013968a c0119bc7 00000000 00000000 00000000
Oct 5 17:03:54 bert kernel: 0000000b 00000000 df26ecd0 00000010 c02faeec 00000000 000000d0 de89fe20
Oct 5 17:03:54 bert kernel: 00000000 33c9ae40 000f421d c039a180 df26ecd0 df26eeac 00000000 7fffffff
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+162/176] schedule_timeout+0xa2/0xb0
Oct 5 17:03:54 bert kernel: [do_poll+148/192] do_poll+0x94/0xc0
Oct 5 17:03:54 bert kernel: [sys_poll+406/560] sys_poll+0x196/0x230
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: dbus-daemon-1 S DF752260 0 1361 1 1374 1355 (NOTLB)
Oct 5 17:03:54 bert kernel: df2e1f14 00000086 b7f35c90 df752260 df2e1ee8 00000001 00000000 df3117d0
Oct 5 17:03:54 bert kernel: 00040e95 00000000 00000000 000000d0 df75228c 00000000 df34f560 df2e1fa0
Oct 5 17:03:54 bert kernel: df2e1ef8 39ee9f40 000f4201 c039a180 df3117d0 df3119ac 00000000 7fffffff
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+162/176] schedule_timeout+0xa2/0xb0
Oct 5 17:03:54 bert kernel: [do_poll+148/192] do_poll+0x94/0xc0
Oct 5 17:03:54 bert kernel: [sys_poll+406/560] sys_poll+0x196/0x230
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: famd S 00000001 0 1374 1 1381 1361 (NOTLB)
Oct 5 17:03:54 bert kernel: df347eb4 00000086 00000000 00000001 df347ea4 c013968a df0cae0c df53a4c0
Oct 5 17:03:54 bert kernel: 00044444 00000000 00000001 00000000 df26f240 00000010 c02faeec 00000000
Oct 5 17:03:54 bert kernel: 000000d0 cd559b80 000f4201 c039a180 df26f240 df26f41c 00000000 7fffffff
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+162/176] schedule_timeout+0xa2/0xb0
Oct 5 17:03:54 bert kernel: [do_select+614/688] do_select+0x266/0x2b0
Oct 5 17:03:54 bert kernel: [sys_select+577/1264] sys_select+0x241/0x4f0
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: gkrellmd S 00000001 0 1381 1 1386 1374 (NOTLB)
Oct 5 17:03:54 bert kernel: de85eeb4 00000086 00000000 00000001 de85eea4 c013968a de76dfff 37363430
Oct 5 17:03:54 bert kernel: 00026443 00000000 00000001 00000000 df26e1f0 00000010 c02faeec 00000000
Oct 5 17:03:54 bert kernel: de85eec8 6adccd40 000f421d c039a180 df26e1f0 df26e3cc fffdbd1b de85eec8
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+87/176] schedule_timeout+0x57/0xb0
Oct 5 17:03:54 bert kernel: [do_select+614/688] do_select+0x266/0x2b0
Oct 5 17:03:54 bert kernel: [sys_select+577/1264] sys_select+0x241/0x4f0
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: inetd S 00000001 0 1386 1 1392 1381 (NOTLB)
Oct 5 17:03:54 bert kernel: df7a9eb4 00000086 00000000 00000001 df7a9ea4 c013968a 00000010 00000020
Oct 5 17:03:54 bert kernel: 000114e7 00000000 00000001 00000000 df26e760 00000010 c02faeec 00000000
Oct 5 17:03:54 bert kernel: 000000d0 2ffae740 000f4202 c039a180 df26e760 df26e93c 00000000 7fffffff
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+162/176] schedule_timeout+0xa2/0xb0
Oct 5 17:03:54 bert kernel: [do_select+614/688] do_select+0x266/0x2b0
Oct 5 17:03:54 bert kernel: [sys_select+577/1264] sys_select+0x241/0x4f0
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: lisa S 00000001 0 1392 1 1410 1386 (NOTLB)
Oct 5 17:03:54 bert kernel: de68beb4 00000086 00000000 00000001 de68bea4 c013968a 00000000 00000000
Oct 5 17:03:54 bert kernel: 0000009a 00000000 00000001 00000000 df8d0bf0 00000010 c02faeec 00000000
Oct 5 17:03:54 bert kernel: de68bec8 57d8bfc0 000f421c c039a180 df8d0bf0 df8d0dcc fffdc51f de68bec8
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+87/176] schedule_timeout+0x57/0xb0
Oct 5 17:03:54 bert kernel: [do_select+614/688] do_select+0x266/0x2b0
Oct 5 17:03:54 bert kernel: [sys_select+577/1264] sys_select+0x241/0x4f0
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: smail S 00000001 0 1410 1 1415 1418 1392 (NOTLB)
Oct 5 17:03:54 bert kernel: de70beb4 00000082 00000000 00000001 de70bea4 c013968a 00000000 00000000
Oct 5 17:03:54 bert kernel: 00028612 00000000 00000001 00000000 df8d0680 00000010 c02faeec 00000000
Oct 5 17:03:54 bert kernel: 000000d0 ff0b7000 000f4201 c039a180 df8d0680 df8d085c 00000000 7fffffff
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+162/176] schedule_timeout+0xa2/0xb0
Oct 5 17:03:54 bert kernel: [do_select+614/688] do_select+0x266/0x2b0
Oct 5 17:03:54 bert kernel: [sys_select+577/1264] sys_select+0x241/0x4f0
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: smail Z DF27F9BC 0 1415 1410 (L-TLB)
Oct 5 17:03:54 bert kernel: de7e6f84 00000046 00000000 df27f9bc 00000000 de7e6f48 00000296 00000000
Oct 5 17:03:54 bert kernel: 00028612 00000000 df310210 00000000 c15415f0 de7e6f84 c011aa5f df3102f4
Oct 5 17:03:54 bert kernel: df310334 ff0b7000 000f4201 c039a180 df310210 df3103ec 00000001 00000000
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [do_exit+579/1072] do_exit+0x243/0x430
Oct 5 17:03:54 bert kernel: [do_group_exit+54/160] do_group_exit+0x36/0xa0
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: sshd S 00000001 0 1418 1 1452 1410 (NOTLB)
Oct 5 17:03:54 bert kernel: de7eceb4 00000082 00000000 00000001 de7ecea4 c013968a 00000000 00000000
Oct 5 17:03:54 bert kernel: 0014d55d 00000000 00000001 00000000 df310780 00000010 c02faeec 00000000
Oct 5 17:03:54 bert kernel: 000000d0 14439100 000f4202 c039a180 df310780 df31095c 00000000 7fffffff
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+162/176] schedule_timeout+0xa2/0xb0
Oct 5 17:03:54 bert kernel: [do_select+614/688] do_select+0x266/0x2b0
Oct 5 17:03:54 bert kernel: [sys_select+577/1264] sys_select+0x241/0x4f0
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: xfs S C02FACA4 0 1452 1 1527 1418 (NOTLB)
Oct 5 17:03:54 bert kernel: de388eb4 00000082 00000000 c02faca4 00000000 00000001 de388eac c013968a
Oct 5 17:03:54 bert kernel: 007286a9 00000000 c02fab20 df555284 00000001 00000000 dfe88600 00000000
Oct 5 17:03:54 bert kernel: de388ec8 8fc3c700 000f4202 c039a180 dfe88600 dfe887dc 00051bce de388ec8
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+87/176] schedule_timeout+0x57/0xb0
Oct 5 17:03:54 bert kernel: [do_select+614/688] do_select+0x266/0x2b0
Oct 5 17:03:54 bert kernel: [sys_select+577/1264] sys_select+0x241/0x4f0
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: bash S DDE69EE8 0 1527 1 1528 1540 1452 (NOTLB)
Oct 5 17:03:54 bert kernel: dde69f18 00000082 dfe63040 dde69ee8 c0144daf ddea038c df7a8080 1df28065
Oct 5 17:03:54 bert kernel: 00031141 00000000 dfe63040 dfe6306c df8d96a4 dde69fb4 c0110a8a 00000001
Oct 5 17:03:54 bert kernel: ffffffff 769c9180 000f4202 c039a180 dde73280 dde7345c dde69000 00000004
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [do_wait+582/1200] do_wait+0x246/0x4b0
Oct 5 17:03:54 bert kernel: [sys_waitpid+37/39] sys_waitpid+0x25/0x27
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: bash S DE3F4EE8 0 1528 1527 1529 1532 (NOTLB)
Oct 5 17:03:54 bert kernel: de3f4f18 00000086 df752d00 de3f4ee8 c0144daf dde8f4b8 dffc2080 1deb7065
Oct 5 17:03:54 bert kernel: 00031141 00000000 df752d00 df752d2c df53b3e4 de3f4fb4 c0110a8a 00000001
Oct 5 17:03:54 bert kernel: c0103e4b 768d4f40 000f4202 c039a180 dfe89650 dfe8982c de3f4000 00000004
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [do_wait+582/1200] do_wait+0x246/0x4b0
Oct 5 17:03:54 bert kernel: [sys_waitpid+37/39] sys_waitpid+0x25/0x27
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: Xprt S C02FACA4 0 1529 1528 (NOTLB)
Oct 5 17:03:54 bert kernel: ddf08eb4 00000082 00000000 c02faca4 00000000 00000001 ddf08eac c013968a
Oct 5 17:03:54 bert kernel: 004c15c0 00000000 c02fab20 dfe7043c 00000001 00000000 ddf15810 00000000
Oct 5 17:03:54 bert kernel: ddf08ec8 dbc2bbc0 000f4202 c039a180 ddf15810 ddf159ec 000520bb ddf08ec8
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+87/176] schedule_timeout+0x57/0xb0
Oct 5 17:03:54 bert kernel: [do_select+614/688] do_select+0x266/0x2b0
Oct 5 17:03:54 bert kernel: [sys_select+577/1264] sys_select+0x241/0x4f0
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: bash S C02FAB20 0 1532 1527 1528 (NOTLB)
Oct 5 17:03:54 bert kernel: ddea3ed0 00000086 df04d3e4 c02fab20 df04d3e4 00000212 ddea3ec0 c01449b7
Oct 5 17:03:54 bert kernel: 00031141 00000000 ddea3ec0 c0143bd5 00000000 dfe5556c 0809cfb0 df04d3e4
Oct 5 17:03:54 bert kernel: df7526a0 769c9180 000f4202 c039a180 dde727a0 dde7297c de89e940 de89e8d0
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [pipe_wait+120/176] pipe_wait+0x78/0xb0
Oct 5 17:03:54 bert kernel: [pipe_readv+393/624] pipe_readv+0x189/0x270
Oct 5 17:03:54 bert kernel: [pipe_read+31/48] pipe_read+0x1f/0x30
Oct 5 17:03:54 bert kernel: [vfs_read+224/288] vfs_read+0xe0/0x120
Oct 5 17:03:54 bert kernel: [sys_read+61/112] sys_read+0x3d/0x70
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: rpc.statd S C02FACA4 0 1540 1 1553 1527 (NOTLB)
Oct 5 17:03:54 bert kernel: dde92eb4 00000082 00000000 c02faca4 00000000 00000001 dde92eac c013968a
Oct 5 17:03:54 bert kernel: 0008b4db 00000000 00000246 c02faca4 00000001 00000000 dde72d10 00000010
Oct 5 17:03:54 bert kernel: c02faeec 91413f40 000f4202 c039a180 dde72d10 dde72eec 00000000 7fffffff
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+162/176] schedule_timeout+0xa2/0xb0
Oct 5 17:03:54 bert kernel: [do_select+614/688] do_select+0x266/0x2b0
Oct 5 17:03:54 bert kernel: [sys_select+577/1264] sys_select+0x241/0x4f0
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: arpwatch S DDFE1C94 0 1553 1 1941 1540 (NOTLB)
Oct 5 17:03:54 bert kernel: ddfe1ce4 00000086 7fffffff ddfe1c94 c0133a98 ddfe1ca8 c0105c8f ddfe1cbc
Oct 5 17:03:54 bert kernel: 00000eb0 00000000 ffffffff c010419c 00000000 00000000 00000000 7fffffff
Oct 5 17:03:54 bert kernel: ddfe1d50 eeb4be80 000f421c c039a180 ddf147c0 ddf1499c 00000000 7fffffff
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [schedule_timeout+162/176] schedule_timeout+0xa2/0xb0
Oct 5 17:03:54 bert kernel: [wait_for_packet+226/304] wait_for_packet+0xe2/0x130
Oct 5 17:03:54 bert kernel: [skb_recv_datagram+122/208] skb_recv_datagram+0x7a/0xd0
Oct 5 17:03:54 bert kernel: [pg0+542639585/1069822976] packet_recvmsg+0x51/0x140 [af_packet]
Oct 5 17:03:54 bert kernel: [sock_recvmsg+188/240] sock_recvmsg+0xbc/0xf0
Oct 5 17:03:54 bert kernel: [sys_recvfrom+129/224] sys_recvfrom+0x81/0xe0
Oct 5 17:03:54 bert kernel: [sys_socketcall+431/560] sys_socketcall+0x1af/0x230
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: S40hotplug S DE847EE8 0 1554 1235 2062 (NOTLB)
Oct 5 17:03:54 bert kernel: de847f18 00000082 df752ae0 de847ee8 c0144daf dd8fc3cc ddea5080 1d5c6065
Oct 5 17:03:54 bert kernel: 0000cec0 00000000 df752ae0 df752b0c df53b9bc de847fb4 c0110a8a 00000001
Oct 5 17:03:54 bert kernel: ffffffff 50d2fec0 000f4203 c039a180 c176ab50 c176ad2c de847000 00000004
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [do_wait+582/1200] do_wait+0x246/0x4b0
Oct 5 17:03:54 bert kernel: [sys_waitpid+37/39] sys_waitpid+0x25/0x27
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: khpsbpkt S DF4F1DDC 0 1941 1 1954 1553 (L-TLB)
Oct 5 17:03:54 bert kernel: de232f84 00000046 c0112570 df4f1ddc 00000000 de232f48 00000296 00000000
Oct 5 17:03:54 bert kernel: 00002d19 00000000 01000000 000f4203 0000000f 00000000 80bf0fc0 000f4203
Oct 5 17:03:54 bert kernel: 80bf0fc0 80bf0fc0 000f4203 c039a180 dde72230 dde7240c e0c40058 00000246
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [__down_interruptible+156/376] __down_interruptible+0x9c/0x178
Oct 5 17:03:54 bert kernel: [__down_failed_interruptible+10/16] __down_failed_interruptible+0xa/0x10
Oct 5 17:03:54 bert kernel: [pg0+545720938/1069822976] .text.lock.ieee1394_core+0xf/0x15 [ieee1394]
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: knodemgrd_0 S DD695F28 0 1954 1 1941 (L-TLB)
Oct 5 17:03:54 bert kernel: dd695f6c 00000046 000000d0 dd695f28 00000202 dd31e6c0 000000d0 dd695f38
Oct 5 17:03:54 bert kernel: 00000000 00000000 dcde1f60 0000a1ff dd695f54 c0185d73 0000a1ff dd31e6c0
Oct 5 17:03:54 bert kernel: dd31e6c0 80bf0fc0 000f4203 c039a180 dd6b6d50 dd6b6f2c dcda14d0 00000246
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [__down_interruptible+156/376] __down_interruptible+0x9c/0x178
Oct 5 17:03:54 bert kernel: [__down_failed_interruptible+10/16] __down_failed_interruptible+0xa/0x10
Oct 5 17:03:54 bert kernel: [pg0+545751169/1069822976] .text.lock.nodemgr+0x10f/0x1ae [ieee1394]
Oct 5 17:03:54 bert kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Oct 5 17:03:54 bert kernel: usb.rc S DE36BEE8 0 2062 1554 2064 (NOTLB)
Oct 5 17:03:54 bert kernel: de36bf18 00000086 dff056c0 de36bee8 c0144daf dd5ba3e0 dd6f7080 1d796065
Oct 5 17:03:54 bert kernel: 00000000 00000000 dff056c0 dff056ec df8d922c de36bfb4 c0110a8a 00000001
Oct 5 17:03:54 bert kernel: ffffffff 529cc240 000f4203 c039a180 df310cf0 df310ecc de36b000 00000004
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [do_wait+582/1200] do_wait+0x246/0x4b0
Oct 5 17:03:54 bert kernel: [sys_waitpid+37/39] sys_waitpid+0x25/0x27
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:03:54 bert kernel: grep D 00000000 0 2064 2062 (NOTLB)
Oct 5 17:03:54 bert kernel: dd6e7ed8 00000086 dd6a7080 00000000 dd6e7ec0 c0144849 dd6a7080 00000001
Oct 5 17:03:54 bert kernel: 00000000 00000000 00000000 00000000 08065d64 dd699c24 dff054a0 00000001
Oct 5 17:03:54 bert kernel: dd6a7080 529cc240 000f4203 c039a180 dd6b72c0 dd6b749c c14ee824 00000246
Oct 5 17:03:54 bert kernel: Call Trace:
Oct 5 17:03:54 bert kernel: [__down+124/320] __down+0x7c/0x140
Oct 5 17:03:54 bert kernel: [__down_failed+11/20] __down_failed+0xb/0x14
Oct 5 17:03:54 bert kernel: [.text.lock.usb+19/166] .text.lock.usb+0x13/0xa6
Oct 5 17:03:54 bert kernel: [usb_device_read+179/304] usb_device_read+0xb3/0x130
Oct 5 17:03:54 bert kernel: [vfs_read+224/288] vfs_read+0xe0/0x120
Oct 5 17:03:54 bert kernel: [sys_read+61/112] sys_read+0x3d/0x70
Oct 5 17:03:54 bert kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Oct 5 17:04:27 bert kernel: SysRq : Emergency Sync
Oct 5 17:04:27 bert kernel: Emergency Sync complete







2004-10-05 23:49:40

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2 ip_conntrack problems

Ed Tomlinson <[email protected]> wrote:
>
> The startup hangs at the same place rc2-mm1 did.

I'll forward your report to [email protected].
The USB tree seems fairly broken lately.

> Disabling APCI does not help. Recient mm build only
> work if APCI is enabled here.

Please send a .config which exhibits this failure.

2004-10-06 10:55:07

by Hugh Dickins

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

On Tue, 5 Oct 2004, Hugh Dickins wrote:
> On Tue, 5 Oct 2004, Peter Zijlstra wrote:
> > On Mon, 2004-10-04 at 19:13, Pasi Savolainen wrote:
> > > make: *** wait: No child processes. Stop.
> > Just a simple mee too!
>
> I've been suffering the occasional leftover zombie from multiple
> kernel builds precisely since the preempt-smp.patch went in; been
> hunting it unsuccessfully in spare moments, yesterday noticed that
> bug, today realize it's probably what I've been hunting - I'm
> about to start my own tests again, can't be sure until tomorrow.

Yes, that _raw_read_trylock patch has fixed my zombie problem: since
2.6.9-rc2-mm1 my repeated kernel builds would hang after several hours,
with a zombie (usually cc1) on one cpu and its waiting parent (usually
gcc) on another, with the puzzle of why the parent had never got woken -
because do_wait's read_lock(&tasklist_lock) went ahead even while
exit_notify held the write lock.

Hugh

2004-10-06 10:57:44

by Ingo Molnar

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2


* Hugh Dickins <[email protected]> wrote:

> Yes, that _raw_read_trylock patch has fixed my zombie problem: since
> 2.6.9-rc2-mm1 my repeated kernel builds would hang after several
> hours, with a zombie (usually cc1) on one cpu and its waiting parent
> (usually gcc) on another, with the puzzle of why the parent had never
> got woken - because do_wait's read_lock(&tasklist_lock) went ahead
> even while exit_notify held the write lock.

great, thanks for tracking this down!

Ingo

2004-10-06 22:11:41

by Hanna Linder

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

--On Monday, October 04, 2004 12:40:08 PM +0200 Karsten Wiese <[email protected]> wrote:

> Hi Andrew,
>
> this lets it compile here:
>

Thanks Karsten,

Your patch worked for me.

Hanna

2004-10-07 00:53:38

by Pasi Savolainen

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

* Hugh Dickins <[email protected]>:
> On Tue, 5 Oct 2004, Peter Zijlstra wrote:
>> On Mon, 2004-10-04 at 19:13, Pasi Savolainen wrote:
>> > LD .tmp_vmlinux1
>> > KSYM .tmp_kallsyms1.S
>> > make: *** wait: No child processes. Stop.
>> > - -
>> > The 'no child processes' keeps on coming up at 'random' moments under
>> > rc3-mm1. First time ever that I've seen it otherwise.
>>
>> Just a simple mee too!
>> on 2.6.9-rc3-mm2-VP-T0 and on some earlier Sx patches as well.
>> Unfortunatly I haven't had time to track back as to when this was
>> introduced.
>
> Please, would you try this patch below that I posted yesterday?
> At the time I thought the trylock was hardly used so not urgent.

Thanks, this seemed to fix it.
In my case these came very frequently and easily. No Zombie processes
were in 'ps aux' output, but I think it's being talked about in the
other thread.

--
Psi -- <http://www.iki.fi/pasi.savolainen>

2004-10-07 06:00:42

by Sid Boyce

[permalink] [raw]
Subject: RE: 2.6.9-rc3-mm2

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.9-rc3-mm2-VP-T1
# Thu Oct 7 06:32:56 2004
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_PREEMPT_TIMING is not set
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_BKL is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT_SOFTIRQS is not set
# CONFIG_PREEMPT_HARDIRQS is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y

#
# Performance-monitoring counters support
#
CONFIG_PERFCTR=y
CONFIG_PERFCTR_INIT_TESTS=y
CONFIG_PERFCTR_VIRTUAL=y
CONFIG_PERFCTR_INTERRUPT_SUPPORT=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_BACKUP_BASE=16
CONFIG_BACKUP_SIZE=32

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hda2"

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_THINKPAD is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y

#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_RTC_IS_GMT=y
CONFIG_APM_ALLOW_INTS=y
CONFIG_APM_REAL_MODE_POWER_OFF=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_PROC_INTF=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_24_API=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_TABLE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
CONFIG_X86_POWERNOW_K7=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
CONFIG_X86_CPUFREQ_NFORCE2=y
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
# CONFIG_EISA_VIRTUAL_ROOT is not set
# CONFIG_EISA_NAMES is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=64000
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_PROBE_EISA_VL=y
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_DEBUG=m

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID5=m
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y

#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m

#
# I2O device support
#
CONFIG_I2O=y
CONFIG_I2O_CONFIG=y
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
CONFIG_I2O_PROC=m

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=m

#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not set
# CONFIG_IP_VS_PROTO_UDP is not set
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
# CONFIG_IP_NF_MATCH_IPRANGE is not set
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
# CONFIG_IP_NF_MATCH_RECENT is not set
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_PHYSDEV is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
# CONFIG_IP_NF_TARGET_CLASSIFY is not set
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_ARP_MANGLE is not set
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m

#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
# CONFIG_IP6_NF_MATCH_PHYSDEV is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
# CONFIG_IP6_NF_RAW is not set

#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_DMASCC=m
CONFIG_SCC=m
CONFIG_SCC_DELAY=y
CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m

#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
# CONFIG_TOSHIBA_FIR is not set
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=m
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
CONFIG_DL2K=m
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
# CONFIG_R8169_VLAN is not set
CONFIG_SK98LIN=m
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input I/O drivers
#
CONFIG_GAMEPORT=m
CONFIG_SOUND_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDDLER is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_INTEL_MCH is not set
CONFIG_AGP_NVIDIA=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_FSCHER is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m

#
# Other I2C Chip support
#
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_RTC8564=m
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
# CONFIG_VIDEO_SAA5246A is not set
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
# CONFIG_VIDEO_ZORAN_DC30 is not set
CONFIG_VIDEO_ZORAN_LML33=m
# CONFIG_VIDEO_ZORAN_LML33R10 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
CONFIG_VIDEO_OVCAMCHIP=m

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set

#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_MEMORY=y
CONFIG_SND_DEBUG_DETECT=y

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
CONFIG_SND_AD1848=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4232=m
CONFIG_SND_CS4236=m
# CONFIG_SND_ES968 is not set
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
CONFIG_SND_GUS_SYNTH=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
CONFIG_SND_WAVEFRONT=m
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
CONFIG_SND_CMI8330=m
# CONFIG_SND_DT019X is not set
CONFIG_SND_OPL3SA2=m
CONFIG_SND_SGALAXY=m
CONFIG_SND_SSCAPE=m

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VX222 is not set

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=m
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set

#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_RW_DETECT=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_HP8200e is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
# CONFIG_USB_W9968CF is not set

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=y
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_SA1100 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_OMAP is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
# CONFIG_USB_G_SERIAL is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_REISER4_FS=m
CONFIG_REISER4_LARGE_KEY=y
# CONFIG_REISER4_CHECK is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y

#
# Caches
#
CONFIG_CACHEFS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_SECURITY=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_POSIX=y
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_SMP_PROCESSOR_ID is not set
CONFIG_DEBUG_INFO=y
CONFIG_FRAME_POINTER=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_KPROBES=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_4KSTACKS is not set
CONFIG_SCHEDSTATS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SECLVL=y
# CONFIG_SECURITY_SELINUX is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y


Attachments:
dot_config (40.11 kB)

2004-10-15 01:37:56

by Rusty Russell

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

On Wed, 2004-10-06 at 00:07, Dominik Karall wrote:
> On Monday 04 October 2004 11:02, Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc3/2.6
> >.9-rc3-mm2/
>
> some more scheduling/preempt problems. following patches were applied:
> ---
> 25/include/linux/netfilter_ipv4/ip_conntrack.h~conntrack-preempt-safety-fix
> Mon Oct 4 14:36:19 2004
> +++ 25-akpm/include/linux/netfilter_ipv4/ip_conntrack.h Mon Oct 4 14:37:02
> 2004
> @@ -311,10 +311,11 @@ struct ip_conntrack_stat
> unsigned int expect_delete;
> };
>
> -#define CONNTRACK_STAT_INC(count) \
> - do { \
> - per_cpu(ip_conntrack_stat, get_cpu()).count++; \
> - put_cpu(); \
> +#define CONNTRACK_STAT_INC(count) \
> + do { \
> + preempt_disable(); \
> + per_cpu(ip_conntrack_stat, smp_processor_id()).count++; \
> + preempt_disable(); \
> } while (0)

Please, please please! Never use per_cpu(XXX, smp_processor_id())! In
this case, it's "get_cpu_var(ip_conntrack_stat).count++; put_cpu(),
although I think this code should only be called in a softirq, so a
simple "__get_cpu_var(ip_conntrack_stat).count++;" is sufficient.

Rusty.
--
Anyone who quotes me in their signature is an idiot -- Rusty Russell

2004-10-15 01:46:23

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Rusty Russell <[email protected]> wrote:
>
> On Wed, 2004-10-06 at 00:07, Dominik Karall wrote:
> > On Monday 04 October 2004 11:02, Andrew Morton wrote:
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc3/2.6
> > >.9-rc3-mm2/
> >
> > some more scheduling/preempt problems. following patches were applied:
> > ---
> > 25/include/linux/netfilter_ipv4/ip_conntrack.h~conntrack-preempt-safety-fix
> > Mon Oct 4 14:36:19 2004
> > +++ 25-akpm/include/linux/netfilter_ipv4/ip_conntrack.h Mon Oct 4 14:37:02
> > 2004
> > @@ -311,10 +311,11 @@ struct ip_conntrack_stat
> > unsigned int expect_delete;
> > };
> >
> > -#define CONNTRACK_STAT_INC(count) \
> > - do { \
> > - per_cpu(ip_conntrack_stat, get_cpu()).count++; \
> > - put_cpu(); \
> > +#define CONNTRACK_STAT_INC(count) \
> > + do { \
> > + preempt_disable(); \
> > + per_cpu(ip_conntrack_stat, smp_processor_id()).count++; \
> > + preempt_disable(); \
> > } while (0)
>
> Please, please please! Never use per_cpu(XXX, smp_processor_id())!

Why?

> In
> this case, it's "get_cpu_var(ip_conntrack_stat).count++; put_cpu(),

Actually, it's put_cpu_var().

> although I think this code should only be called in a softirq, so a
> simple "__get_cpu_var(ip_conntrack_stat).count++;" is sufficient.

We were getting warnings from somewhere or other due to smp_processor_id()
within preemptible code - I don't recall the callsite.

2004-10-15 02:05:21

by Rusty Russell

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

On Fri, 2004-10-15 at 11:44, Andrew Morton wrote:
> Rusty Russell <[email protected]> wrote:
> > Please, please please! Never use per_cpu(XXX, smp_processor_id())!
>
> Why?

Because that's what get_cpu_var() does, and an arch might not need to
get the processor id to do it. As more things get per-cpu-ified, and
smp_processor_id() for its own sake becomes more unusual, I expect archs
to go to smp_processor_id() as a per-cpu variable, and a register
holding the per-cpu offset. (This needs a real dynamic per-cpu
allocator, as well, which I've been meaning to polish off).

> We were getting warnings from somewhere or other due to smp_processor_id()
> within preemptible code - I don't recall the callsite.

That's weird, but implies bogosity in the caller. Covering it up like
this is not necessarily a win.

Rusty.
--
Anyone who quotes me in their signature is an idiot -- Rusty Russell

2004-10-15 02:11:14

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

Rusty Russell <[email protected]> wrote:
>
> > We were getting warnings from somewhere or other due to smp_processor_id()
> > within preemptible code - I don't recall the callsite.
>
> That's weird, but implies bogosity in the caller. Covering it up like
> this is not necessarily a win.

umm.

ip_conntrack_cleanup
->ip_ct_selective_cleanup
->death_by_timeout
->CONNTRACK_STAT_INC

is one route.

2004-10-15 03:07:20

by Rusty Russell

[permalink] [raw]
Subject: Re: 2.6.9-rc3-mm2

On Fri, 2004-10-15 at 12:09, Andrew Morton wrote:
> Rusty Russell <[email protected]> wrote:
> >
> > > We were getting warnings from somewhere or other due to smp_processor_id()
> > > within preemptible code - I don't recall the callsite.
> >
> > That's weird, but implies bogosity in the caller. Covering it up like
> > this is not necessarily a win.
>
> umm.
>
> ip_conntrack_cleanup
> ->ip_ct_selective_cleanup
> ->death_by_timeout
> ->CONNTRACK_STAT_INC
>
> is one route.

Yep, called on module removal.

Cheers,
Rusty.

Name: Avoid warning on CONNTRACK_STAT_INC in death_by_timeout()
Status: Trivial
Signed-off-by: Rusty Russell <[email protected]>

Module removal can call death_by_timeout() manually, which isn't in
softirq context, so the CONNTRACK_STAT_INC() call there (which assumes
preempt disabled) can give a warning. Of course, the warning here is
spurious, but the simplest workaround is to call CONNTRACK_STAT_INC()
inside the lock.

diff -urpN --exclude TAGS -X /home/rusty/devel/kernel/kernel-patches/current-dontdiff --minimal .29431-linux-2.6.9-rc4-bk2/net/ipv4/netfilter/ip_conntrack_core.c .29431-linux-2.6.9-rc4-bk2.updated/net/ipv4/netfilter/ip_conntrack_core.c
--- .29431-linux-2.6.9-rc4-bk2/net/ipv4/netfilter/ip_conntrack_core.c 2004-10-11 15:17:21.000000000 +1000
+++ .29431-linux-2.6.9-rc4-bk2.updated/net/ipv4/netfilter/ip_conntrack_core.c 2004-10-15 13:05:52.000000000 +1000
@@ -328,9 +328,10 @@ static void death_by_timeout(unsigned lo
{
struct ip_conntrack *ct = (void *)ul_conntrack;

- CONNTRACK_STAT_INC(delete_list);
-
WRITE_LOCK(&ip_conntrack_lock);
+ /* Inside lock so preempt is disabled on module removal path.
+ * Otherwise we can get spurious warnings. */
+ CONNTRACK_STAT_INC(delete_list);
clean_from_lists(ct);
WRITE_UNLOCK(&ip_conntrack_lock);
ip_conntrack_put(ct);

--
Anyone who quotes me in their signature is an idiot -- Rusty Russell