Tegra PMC has blink control to output 32 Khz clock out to Tegra
blink pin. Blink pad DPD state and enable controls are part of
Tegra PMC register space.
Currently Tegra clock driver registers blink control by passing
PMC address and register offset to clk_register_gate which performs
direct PMC access during clk_ops and with this when PMC is in secure
mode, any access from non-secure world does not go through.
This patch adds blink control registration to the Tegra PMC driver
using PMC specific clock gate operations that use tegra_pmc_readl
and tegra_pmc_writel to support both secure mode and non-secure
mode PMC register access.
Signed-off-by: Sowjanya Komatineni <[email protected]>
---
drivers/soc/tegra/pmc.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index a353f6d0a832..1cfb7797dbd5 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -61,12 +61,15 @@
#define PMC_CNTRL_SYSCLK_OE BIT(11) /* system clock enable */
#define PMC_CNTRL_SYSCLK_POLARITY BIT(10) /* sys clk polarity */
#define PMC_CNTRL_PWRREQ_POLARITY BIT(8)
+#define PMC_CNTRL_BLINK_EN BIT(7)
#define PMC_CNTRL_MAIN_RST BIT(4)
#define PMC_WAKE_MASK 0x0c
#define PMC_WAKE_LEVEL 0x10
#define PMC_WAKE_STATUS 0x14
#define PMC_SW_WAKE_STATUS 0x18
+#define PMC_DPD_PADS_ORIDE 0x1c
+#define PMC_DPD_PADS_ORIDE_BLINK BIT(20)
#define DPD_SAMPLE 0x020
#define DPD_SAMPLE_ENABLE BIT(0)
@@ -79,6 +82,7 @@
#define PWRGATE_STATUS 0x38
+#define TEGRA210_PMC_BLINK_TIMER 0x40
#define PMC_IMPL_E_33V_PWR 0x40
#define PMC_PWR_DET 0x48
@@ -347,6 +351,8 @@ struct tegra_pmc_soc {
struct pmc_clk_init_data *pmc_clks_data;
unsigned int num_pmc_clks;
+ bool has_blink_output;
+ bool blink_init_state;
};
static const char * const tegra186_reset_sources[] = {
@@ -2396,6 +2402,9 @@ static void tegra_pmc_clock_register(struct tegra_pmc *pmc,
/* each pmc clock output has a mux and a gate */
num_clks = pmc->soc->num_pmc_clks * 2;
+ if (pmc->soc->has_blink_output)
+ num_clks += 1;
+
if (!num_clks)
return;
@@ -2468,6 +2477,34 @@ static void tegra_pmc_clock_register(struct tegra_pmc *pmc,
}
}
+ if (pmc->soc->has_blink_output) {
+ tegra_pmc_writel(pmc, 0x0, TEGRA210_PMC_BLINK_TIMER);
+ clk = tegra_pmc_clk_gate_register("blink_override",
+ "clk_32k", 0,
+ PMC_DPD_PADS_ORIDE,
+ PMC_DPD_PADS_ORIDE_BLINK);
+ if (IS_ERR(clk))
+ goto free_clks;
+
+ clk = tegra_pmc_clk_gate_register("blink",
+ "blink_override", 0,
+ PMC_CNTRL,
+ PMC_CNTRL_BLINK_EN);
+ if (IS_ERR(clk))
+ goto free_clks;
+
+ clk_data->clks[TEGRA_PMC_CLK_BLINK] = clk;
+ clk_register_clkdev(clk, "blink", NULL);
+
+ if (pmc->soc->blink_init_state) {
+ if (clk_prepare_enable(clk)) {
+ pr_err("%s: Failed to enable %s\n", __func__,
+ __clk_get_name(clk));
+ WARN_ON(1);
+ }
+ }
+ }
+
of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
return;
@@ -2740,6 +2777,8 @@ static const struct tegra_pmc_soc tegra20_pmc_soc = {
.num_reset_levels = 0,
.pmc_clks_data = NULL,
.num_pmc_clks = 0,
+ .has_blink_output = true,
+ .blink_init_state = true,
};
static const char * const tegra30_powergates[] = {
@@ -2789,6 +2828,8 @@ static const struct tegra_pmc_soc tegra30_pmc_soc = {
.num_reset_levels = 0,
.pmc_clks_data = tegra_pmc_clks_data,
.num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
+ .has_blink_output = true,
+ .blink_init_state = true,
};
static const char * const tegra114_powergates[] = {
@@ -2842,6 +2883,8 @@ static const struct tegra_pmc_soc tegra114_pmc_soc = {
.num_reset_levels = 0,
.pmc_clks_data = tegra_pmc_clks_data,
.num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
+ .has_blink_output = true,
+ .blink_init_state = false,
};
static const char * const tegra124_powergates[] = {
@@ -2955,6 +2998,8 @@ static const struct tegra_pmc_soc tegra124_pmc_soc = {
.num_reset_levels = 0,
.pmc_clks_data = tegra_pmc_clks_data,
.num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
+ .has_blink_output = true,
+ .blink_init_state = false,
};
static const char * const tegra210_powergates[] = {
@@ -3071,6 +3116,8 @@ static const struct tegra_pmc_soc tegra210_pmc_soc = {
.wake_events = tegra210_wake_events,
.pmc_clks_data = tegra_pmc_clks_data,
.num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
+ .has_blink_output = true,
+ .blink_init_state = false,
};
#define TEGRA186_IO_PAD_TABLE(_pad) \
@@ -3202,6 +3249,7 @@ static const struct tegra_pmc_soc tegra186_pmc_soc = {
.wake_events = tegra186_wake_events,
.pmc_clks_data = NULL,
.num_pmc_clks = 0,
+ .has_blink_output = false,
};
static const struct tegra_io_pad_soc tegra194_io_pads[] = {
@@ -3321,6 +3369,7 @@ static const struct tegra_pmc_soc tegra194_pmc_soc = {
.wake_events = tegra194_wake_events,
.pmc_clks_data = NULL,
.num_pmc_clks = 0,
+ .has_blink_output = false,
};
static const struct of_device_id tegra_pmc_match[] = {
--
2.7.4
27.11.2019 07:59, Sowjanya Komatineni пишет:
> Tegra PMC has blink control to output 32 Khz clock out to Tegra
> blink pin. Blink pad DPD state and enable controls are part of
> Tegra PMC register space.
>
> Currently Tegra clock driver registers blink control by passing
> PMC address and register offset to clk_register_gate which performs
> direct PMC access during clk_ops and with this when PMC is in secure
> mode, any access from non-secure world does not go through.
>
> This patch adds blink control registration to the Tegra PMC driver
> using PMC specific clock gate operations that use tegra_pmc_readl
> and tegra_pmc_writel to support both secure mode and non-secure
> mode PMC register access.
>
> Signed-off-by: Sowjanya Komatineni <[email protected]>
> ---
> drivers/soc/tegra/pmc.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 49 insertions(+)
>
> diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
> index a353f6d0a832..1cfb7797dbd5 100644
> --- a/drivers/soc/tegra/pmc.c
> +++ b/drivers/soc/tegra/pmc.c
> @@ -61,12 +61,15 @@
> #define PMC_CNTRL_SYSCLK_OE BIT(11) /* system clock enable */
> #define PMC_CNTRL_SYSCLK_POLARITY BIT(10) /* sys clk polarity */
> #define PMC_CNTRL_PWRREQ_POLARITY BIT(8)
> +#define PMC_CNTRL_BLINK_EN BIT(7)
> #define PMC_CNTRL_MAIN_RST BIT(4)
>
> #define PMC_WAKE_MASK 0x0c
> #define PMC_WAKE_LEVEL 0x10
> #define PMC_WAKE_STATUS 0x14
> #define PMC_SW_WAKE_STATUS 0x18
> +#define PMC_DPD_PADS_ORIDE 0x1c
> +#define PMC_DPD_PADS_ORIDE_BLINK BIT(20)
>
> #define DPD_SAMPLE 0x020
> #define DPD_SAMPLE_ENABLE BIT(0)
> @@ -79,6 +82,7 @@
>
> #define PWRGATE_STATUS 0x38
>
> +#define TEGRA210_PMC_BLINK_TIMER 0x40
This register is common for all Tegra SoCs, therefore TEGRA210_ prefix
isn't needed.