ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc5/2.6.11-rc5-mm1/
- Lots of tuning/balancing changes in the CPU scheduler. Mainly targetted
at larger SMT/SMP/NUMA machines. It's going to be hard to work out whether
these are a net benefit.
- A pcmcia update which obsoletes cardmgr (although cardmgr still works) and
makes pcmcia work more like regular hotpluggable devices. See the
changelong in pcmcia-dont-send-eject-request-events-to-userspace.patch for
details.
- A new reiser4 code drop.
- A new rev of the NFS ACL code.
- I seem to be getting a lot of patches which don't compile if you breathe
on the .config file, let alone if you try them on another architecture. It
would be nice to receive less such patches, please.
Changes since 2.6.11-rc4-mm1:
linus.patch
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-arm.patch
bk-cifs.patch
bk-cpufreq.patch
bk-driver-core.patch
bk-drm-via.patch
bk-i2c.patch
bk-ide-dev.patch
bk-ieee1394.patch
bk-input.patch
bk-dtor-input.patch
bk-jfs.patch
bk-kbuild.patch
bk-kconfig.patch
bk-netdev.patch
bk-ntfs.patch
bk-pci.patch
bk-scsi.patch
bk-serial.patch
bk-usb.patch
bk-watchdog.patch
Latest versions of various subsystem trees.
-ppc64-fix-compilation-for-maple-board.patch
-alps-do-not-activate-on-unsupported-models.patch
-device-mapper-dm-raid1-deadlock-fix.patch
-fix-ip_rt_gc_min_interval_ms-procfs-sysctl.patch
-cpufreq-core-reduce-warning-messages.patch
-tpm-build-fix.patch
-bk-driver-core-infiniband-build-fix.patch
-ide-fix-masked_irq-arg-handling-for-ide_do_request.patch
-ohci1394-dma_pool_destroy-while-in_atomic-irqs_disabled.patch
-tone-down-pci=routeirq-message.patch
-compat-ioctl-for-submiting-urb.patch
-compat-ioctl-for-submiting-urb-fix.patch
-ppc32-report-chip-version-in-proc-cpuinfo-for-85xx-boards.patch
-ppc32-fix-formatting-of-cds-common-platform-file.patch
-agpgart-allow-multiple-backends-to-be-initialized.patch
-agpgart-allow-multiple-backends-to-be-initialized-fix.patch
-agpgart-add-agp_find_bridge-function.patch
-agpgart-allow-drivers-to-allocate-memory-local-to.patch
-drm-add-support-for-new-multiple-agp-bridge-agpgart-api.patch
-fb-add-support-for-new-multiple-agp-bridge-agpgart-api.patch
-agpgart-add-bridge-parameter-to-driver-functions.patch
-fix-futex-mmap_sem-deadlock.patch
-mtrr-some-cleanups.patch
-fix-u32-vs-pm_message_t-confusion-in-firewire.patch
-fix-u32-vs-pm_message_t-in-network-device-drivers.patch
Merged
+ia64-audit-build-fix.patch
ia64 compile fix
+selinux-leak-in-error-path.patch
+selinux-null-dereference-in-error-path.patch
SELinux fixlets
+genhd-null-check-fix.patch
Avoid possible oops
+setup_per_zone_lowmem_reserve-oops-fix.patch
Avoid div-by-zero
+dv1394-ioctl-retval-fix.patch
Fix 1394 ioctl breakage
+macserial-build-fix.patch
macserial sanity fix.
+fix-audit-inode-filter.patch
Fix the auditing code.
+prism54-not-releasing-region.patch
Missed release_region()
+fix-panic-in-26-with-bounced-bio-and-dm.patch
BIO bouncing fix
+partitions-msdosc.patch
partition handling fix
+acpi-video-pointer-size-fix.patch
ACPI fix
+sound-priv_data-offsetting-fix.patch
+include-linux-soundcardh-endianness-fix.patch
Couple of sound fixes
-changes-to-the-i2c-driver-to-support-a-non-blocking-interface.patch
-minor-ipmi-enhancements.patch
-modify-the-i801-i2c-driver-to-use-the-non-blocking-interface.patch
-add-the-ipmi-smbus-driver.patch
-add-the-ipmi-smbus-driver-fix.patch
-add-the-ipmi-smbus-driver-fix-fix.patch
-fix-for-the-ipmi-smb-driver.patch
-ipmi-documentation-updates.patch
The IPMI patches keep on changing. I gave up and dropped it all.
+bk-i2c-saa7146-build-fix.patch
Compile fix
+preliminary-w83627ehf-hardware-monitoring-driver.patch
i2c-based hardware monitoring driver
+ide_init_disk-fix.patch
Fix IDE device enumeration
-twidjoy-build-fix.patch
Dropped - was fixed by other means.
-pcmcia-bridge-resource-management-fix.patch
Dropped.
+mips-fixed-confliction-types-for.patch
+mips-fixed-kernel-code-resource.patch
+e100-resource-warning-fix.patch
+8139cp-resource-warning-fixes.patch
+8139too-resource-warning-fixes.patch
+u64-is-not-long-long.patch
Fix a subset of various brokennesses in bk-pci.patch.
+usb-hcd-u64-warning-fix.patch
u64's CANNOT be printk'ed with %ll, dammit.
+sysfs-signedness-problem.patch
sysfs fixlet
-swapspace-layout-improvements-fix.patch
Folded into swapspace-layout-improvements.patch
-stop-using-base-argument-in-__free_pages_bulk-tidy.patch
Folded into stop-using-base-argument-in-__free_pages_bulk.patch
+copy_pte_range-latency-fix.patch
scheduling latency fix
+ia64-specific-dev-mem-handlers.patch
+ia64-specific-dev-mem-handlers-fixes.patch
Hack around in the /dev/mem driver to avoid arch-specific cache coherency
problems.
+readahead-unneeded-prev_page-assignments.patch
+readahead-cleanup-get_next_ra_size.patch
+readahead-factor-out-duplicated-code.patch
+readahead-cleanup-blockable_page_cache_readahead.patch
readahead simplifications
+allow-vma-merging-with-mlock-et-al.patch
VMA merging
-move-accounting-function-calls-out-of-critical-vm-code-pathspatch-fix.patch
Folded into move-accounting-function-calls-out-of-critical-vm-code-pathspatch.patch
-invalidate-range-of-pages-after-direct-io-write-fix.patch
-invalidate-range-of-pages-after-direct-io-write-fix-fix.patch
Folded into invalidate-range-of-pages-after-direct-io-write.patch
+drivers-net-wan-z85230c-interrupt-handling-fix.patch
Fix interrupt handler in this WAN driver
+fix-driver-name-in-dl2k-as-returned-by-ethtool_gdrvinfo.patch
ethtool interface fix
+fix-buggy-ieee80211_crypt_-selects.patch
Kconfig fix
+ppc32-incorrect-define-in-include-asm-ppc-cpm2h.patch
+ppc32-bogus-definition-of-__cmpxchg_u32.patch
+ppc32-fix-whitespace-for-85xx-cds-common-platform.patch
+ppc32-move-from-using-define-svr_-to-cur_ppc_sys_spec-name.patch
+ppc32-mv64360_pic-non-zero-irq-base.patch
+ppc32-add-gpio-irq-definitions-for-mv64x60-parts.patch
ppc32 udpates
+ppc64-implement-a-vdso-and-use-it-for-signal-trampoline-gas-workaround.patch
Bang on ppc64-implement-a-vdso-and-use-it-for-signal-trampoline.patch to
avoid toolchain problems.
+ppc64-generic-hotplug-cpu-support-fix.patch
Fix runtime warning in ppc64-generic-hotplug-cpu-support.patch
+ppc64-fix-thinko-in-prom_initc.patch
+ppc64-fix-zimage-wrapper-incorrect-size-to-flush_cache.patch
ppc64 fixes
-ppc64-reloc_hide.patch
I finally updated my ppc64 toolchain
+determine-scx200-cb-address-at-run-time.patch
SCx200 address probing
+iounmap-isa-special-case.patch
Make iounmap() understand ioremap() special-cases.
+support-for-geode-cpus.patch
GEODE support
+make-highmem_start-access-only-valid-addresses-i386.patch
+i386-c99-initializers-for-hw_interrupt_type-structures.patch
+x86-memset-the-i386-numa-pgdats-in-arch-code.patch
+x86-do-not-unnecessarily-memset-the-pgdats.patch
+x86-abstract-discontigmem-setup.patch
+x86-abstract-discontigmem-setup-fix.patch
+x86-abstract-discontigmem-setup-ppc64-fix.patch
+x86-allow-srat-to-parse-empty-nodes.patch
+x86-srat-cleanup-make-calculations-and-indenting-level-more-sane.patch
+remove-dead-cyrix-centaur-mtrr-init-code.patch
Variosu x86-specific updates
-swsusp-do-not-use-higher-order-memory-allocations-on-suspend-fix.patch
-swsusp-do-not-use-higher-order-memory-allocations-on-suspend-fix-fix.patch
Folded into swsusp-do-not-use-higher-order-memory-allocations-on-suspend.patch
+update-suspend-to-ram-vs-video-documentation.patch
swsusp docco
-merge-vt_struct-into-vc_data-fix.patch
Folded into merge-vt_struct-into-vc_data.patch
-jbd-fix-against-journal-overflow-tidies.patch
Folded into jbd-fix-against-journal-overflow.patch
-fix-kallsyms-insmod-rmmod-race-fix.patch
-fix-kallsyms-insmod-rmmod-race-fix-fix.patch
Folded into fix-kallsyms-insmod-rmmod-race.patch
-touch_softlockup_watchdog.patch
-fix-softlockup-warning-in-swsuspend-resume.patch
Folded into detect-soft-lockups.patch
-add-struct-request-end_io-callback-fix.patch
Folded into add-struct-request-end_io-callback.patch
+drivers-scsi-arcmsr-arcmsrc-cleanups.patch
Tweak the areca driver
-seccomp-tidy.patch
Folded into seccomp.patch
-add-nobh_writepage-support-tidy.patch
-add-nobh_writepage-support-fix.patch
Folded into add-nobh_writepage-support.patch
+reiserfs-return-eio-instead-of-calling-bug-when-rename.patch
reiserfs fixlet
+keys-doc-update-on-locking.patch
key infrastructure documentation update
+detangle-audith-from-fsh.patch
header file rationalisation
+ext3_new_inode-failure-handling-missing-check.patch
Add ext3 error check.
+loglevel-boot-option.patch
Add `loglevel=N' boot option
+cross-compile-scripts-lxdialog-on-aix.patch
Fix for AIX cross-compilation
-sort-fix.patch
-sort-export.patch
-sort-build-fix.patch
Folded into lib-sort-heapsort-implementation-of-sort.patch
+inotify-locking-fix.patch
inotify fix
-random-pt4-replace-sha-with-faster-version-fix.patch
-random-pt4-replace-sha-with-faster-version-fix-fix.patch
-random-pt4-replace-sha-with-faster-version-fix-fix-fix.patch
Folded into random-pt4-replace-sha-with-faster-version.patch
-speedup-proc-pid-maps-fix.patch
-speedup-proc-pid-maps-fix-fix.patch
-speedup-proc-pid-maps-fix-fix-fix.patch
-fix-loss-of-records-on-size-4096-in-proc-pid-maps.patch
-speedup-proc-pid-maps-fix-fix-fix-fix.patch
Folded into speedup-proc-pid-maps.patch
-posix-timers-cpu-clock-support-for-posix-timers-fix2.patch
+posix-timers-cpu-clock-support-for-posix-timers-fix3.patch
+make-itimer_prof-itimer_virtual-per-process-fix.patch
Fiddle with the posix cpu timer patches in -mm.
+override-rlimit_sigpending-for-non-rt-signals.patch
+show-rlimit_sigpending-usage-in-proc-pid-status.patch
+set-rlimit_sigpending-limit-based-on-rlimit_nproc.patch
Variosu fixes and robustness enhamcements for the signal code.
+pcmcia-dont-send-eject-request-events-to-userspace.patch
+pcmcia-hotplug-event-for-pcmcia-devices.patch
+pcmcia-hotplug-event-for-pcmcia-socket-devices.patch
+pcmcia-device-and-driver-matching.patch
+pcmcia-check-for-invalid-crc32-hashes-in-id_tables.patch
+pcmcia-match-for-fake-cis.patch
+pcmcia-export-cis-in-sysfs.patch
+pcmcia-cis-overrid-via-sysfs.patch
+pcmcia-match-anonymous-cards.patch
+pcmcia-allow-function-id-based-match.patch
+pcmcia-file2alias.patch
+pcmcia-request-cis-via-firmware-interface.patch
+pcmcia-cleanups.patch
+pcmcia-rescan-bus-always-upon-echoing-into-setup_done.patch
Make the pcmcia code more hotpluggy - obsoletes cardctl/cardmgr, although
the latter will still work.
+pcmcia-id_table-for-serial_cs.patch
+pcmcia-id_table-for-3c574_cs.patch
+pcmcia-id_table-for-3c589_cs.patch
+pcmcia-id_table-for-aha152x.patch
+pcmcia-id_table-for-airo_cs.patch
+pcmcia-id_table-for-axnet_cs.patch
+pcmcia-id_table-for-fdomain_stub.patch
+pcmcia-id_table-for-fmvj18x_cs.patch
+pcmcia-id_table-for-ibmtr_cs.patch
+pcmcia-id_table-for-netwave_cs.patch
+pcmcia-id_table-for-nmclan_cs.patch
+pcmcia-id_table-for-teles_cs.patch
+pcmcia-id_table-for-ray_cs.patch
+pcmcia-id_table-for-wavelan_cs.patch
+pcmcia-id_table-for-sym53c500_csc.patch
+pcmcia-id_table-for-qlogic_stubc.patch
+pcmcia-id_table-for-smc91c92_csc.patch
+pcmcia-id_table-for-orinoco_cs.patch
+pcmcia-id_table-for-xirc2ps_csc.patch
+pcmcia-id_table-for-ide_csc.patch
+pcmcia-id_table-for-parport_csc.patch
+pcmcia-id_table-for-pcnet_csc.patch
+pcmcia-id_table-for-pcmciamtdc.patch
+pcmcia-id_table-for-vxpocketc.patch
+pcmcia-id_table-for-atmel_csc.patch
+pcmcia-id_table-for-atmel_csc-fix.patch
+pcmcia-id_table-for-avma1_csc.patch
+pcmcia-id_table-for-avm_csc.patch
+pcmcia-id_table-for-bluecard_csc.patch
+pcmcia-id_table-for-bt3c_csc.patch
+pcmcia-id_table-for-btuart_csc.patch
+pcmcia-id_table-for-com20020_csc.patch
+pcmcia-id_table-for-dtl1_csc.patch
+pcmcia-id_table-for-elsa_csc.patch
+pcmcia-id_table-for-ixj_pcmciac.patch
+pcmcia-id_table-for-nsp_csc.patch
+pcmcia-id_table-for-sedlbauer_csc.patch
+pcmcia-id_table-for-wl3501_csc.patch
+pcmcia-id_table-for-pdaudiocfc.patch
Lots of module device tables for pcmcia hardware
+nfsacl-acl-kconfig-cleanup.patch
-nfsacl-encode-and-decode-arbitrary-xdr-arrays-fix.patch
-nfsacl-encode-and-decode-arbitrary-xdr-arrays-fix2.patch
-nfsv4-deamon-always-supports-acls.patch
-lib-sort-replace-qsort-in-nfs-acl-code.patch
-nfsacl-infrastructure-and-server-side-of-nfsacl-fix.patch
+nfsacl-nfs-mknod-cleanup.patch
+nfsacl-nfs-mkdir-cleanup.patch
-nfsacl-client-side-of-nfsacl-fix.patch
+nfsacl-kconfig-hack.patch
+nfsacl-client-side-of-nfsacl-build-fix.patch
-nfsacl-acl-umask-handling-workaround-in-nfs-client-fix.patch
-nfs-acl-build-fix-posix-acl-config-tidy.patch
-nfsacl-return-enosys-for-rpc-programs-that-are-unavailable-fix.patch
New set of NFS ACL patches
-kgdb-documentation-fix.patch
Folded into kgdb-ga.patch
-dev-mem-restriction-patch.patch
-dev-mem-restriction-patch-allow-reads.patch
These got in the way of other things and may be a bit risky from a
back-compat POV anyway.
+sched-timestamp-fixes.patch
+sched-timestamp-fixes-fix.patch
+sched-improve-pinned-task-handling.patch
+sched-improve-pinned-task-handling-fix.patch
+sched-rework-schedstats.patch
+sched-find_busiest_group-fixlets.patch
+sched-find_busiest_group-cleanup.patch
+sched-no-aggressive-idle-balancing.patch
+sched-better-active-balancing-heuristic.patch
+sched-generalised-cpu-load-averaging.patch
+sched-less-affine-wakups.patch
+sched-remove-aggressive-idle-balancing.patch
+sched-sched-domains-aware-balance-on-fork.patch
+sched-schedstats-additions-for-sched-balance-fork.patch
+sched-basic-tuning.patch
+random-ia64-sched-domains-values.patch
Lots of CPU scheduler updates.
-allow-modular-ide-pnp.patch
Dropped.
-ppc64-fix-cpu-hotplug.patch
Folded into i386-cpu-hotplug-updated-for-mm.patch
+x86-crashkernel-fix.patch
Fix x86-crashkernel.patch
+kexec-ppc-fix-noret_type.patch
Fix kexec-ppc-support.patch
+kdump-export-crash-notes-section-address-through.patch
+kdump-export-crash-notes-section-address-through-build-fix.patch
+kdump-export-crash-notes-section-address-through-x86_64-fix.patch
Export the notes section to kdump
-reiser4-radix-tree-tag.patch
+reiser4-perthread_pages_alloc-cleanup.patch
-reiser4-recover-read-performance.patch
-reiser4-export-find_get_pages_tag.patch
-reiser4-add-missing-context.patch
reiser4 update
+intelfbdrv-resource-warning-fixes.patch
Fix more 64-bit-resource printk warnings
-fbdev-generic-drawing-function-cleanups-fix.patch
Folded into fbdev-generic-drawing-function-cleanups.patch
+radeonfb-disable-agp-on-suspend.patch
+aty128fb-disable-agp-on-suspend.patch
+ppc32-uninorth-agp-suspend-support.patch
fbdev/agp power management updates
+md-printk-fix.patch
You cannot printk a u64 with %ll, dammit.
+device-mapper-multipath-hardware-handler-fix.patch
Fix device-mapper-multipath-hardware-handler.patch
-fuse-device-functions-fix-race-in-interrupted-request.patch
-fuse-device-functions-fix.patch
-fuse-fix-llseek-on-device.patch
-fuse-make-two-functions-static.patch
-fuse-fix-variable-with-confusing-name.patch
-fuse-read-write-operations-fix.patch
-fuse-dont-check-against-zero-fsuid.patch
-fuse-remove-mount_max-and-user_allow_other-module-parameters.patch
Folded into other FUSE patches
-i386-x86_64-apicc-make-two-functions-static.patch
-i386-cyrixc-make-a-function-static.patch
-i386-cpuidc-make-two-functions-static.patch
-i386-efic-make-some-code-static.patch
-i386-mpparsec-make-mp_processor_info-static.patch
-i386-x86_64-msrc-make-two-functions-static.patch
-hpet-make-some-code-static.patch
-26-patch-i386-trapsc-make-a-function-static.patch
-i386-semaphorec-make-4-functions-static.patch
-i386-setupc-make-4-variables-static.patch
-kernel-acctc-make-a-function-static.patch
-kernel-auditc-make-some-functions-static.patch
-kernel-capabilityc-make-a-spinlock-static.patch
-mm-thrashc-make-a-variable-static.patch
-lib-kernel_lockc-make-kernel_sem-static.patch
-drivers-block-umemc-make-two-functions-static.patch
-drivers-block-xdc-make-a-variable-static.patch
-kernel-forkc-make-mm_cachep-static.patch
-kernel-forkc-make-mm_cachep-static-fix.patch
-mm-shmemc-make-a-struct-static.patch
-cirrusfbc-make-some-code-static.patch
-matroxfb_basec-make-some-code-static.patch
-matroxfb_basec-make-some-code-static-fix.patch
-asiliantfbc-make-some-code-static.patch
-security-seclvlc-make-some-code-static.patch
-drivers-block-elevatorc-make-two-functions-static.patch
-drivers-block-rdc-make-two-variables-static.patch
-loopc-make-two-functions-static.patch
-fs-lockd-clntprocc-make-2-functions-static.patch
-kernel-resourcec-make-resource_op-static.patch
-kernel-power-mainc-make-pm_states-static.patch
-kernel-sysc-make-some-code-static.patch
-scsi-ipsc-make-some-code-static.patch
-scsi-psi240ic-make-4-functions-static.patch
-scsi-src-make-a-struct-static.patch
-drivers-video-i810-make-some-code-static.patch
-floppyc-make-some-code-static.patch
-drivers-block-nbdc-make-3-functions-static.patch
-kernel-timerc-make-two-variables-static.patch
-fs-hpfs-make-some-code-static.patch
-i386-x86_64-processc-make-hlt_counter-static.patch
-i386-mach-default-topologyc-make-cpu_devices-static.patch
-savagefbc-make-some-code-static.patch
-fs-ncpfs-ncplib_kernelc-make-a-function-static.patch
-fs-nfs-make-some-code-static.patch
-i386-x86_64-i8259c-make-mask_and_ack_8259a-static.patch
-scsi-sym53c416c-make-a-function-static.patch
-scsi-ultrastorc-make-a-variable-static.patch
-kernel-intermodulec-make-inter_module_get-static.patch
-sstfbc-make-some-code-static.patch
-scsi-53c700c-make-ncr_700_intr-static.patch
-scsi-dpt_i2oc-make-some-code-static.patch
-i386-io_apicc-make-two-variables-static.patch
-i386-x86_64-mpparsec-make-some-code-static.patch
-i386-quirksc-make-a-function-static.patch
-cfq-ioschedc-make-some-code-static.patch
-deadline-ioschedc-make-a-struct-static.patch
+make-various-things-static.patch
Roll all these into one patch
+fs-proc-kcorec-make-a-function-static.patch
+fs-qnx4-make-some-code-static.patch
+drivers-char-isicomc-make-a-struct-static.patch
+drivers-char-watchdog-make-some-code-static.patch
+drivers-char-synclinkmpc-make-3-functions-static.patch
+drivers-scsi-chc-make-a-struct-static.patch
Little cleanups
-pty-oops-fix.patch
This was fixed by other means
+mark-blk_dev_ps2-as-broken.patch
+vsprintfc-cleanups.patch
+i386-scx200c-misc-cleanups.patch
+unexport-mmu_cr4_features.patch
+drivers-char-mxserc-cleanups.patch
+drivers-char-mwave-smapic-small-cleanups.patch
+drivers-char-specialixc-misc-cleanups.patch
+drivers-char-sysrqc-remove-the-unused-sysrq_power_off.patch
+small-partitions-msdos-cleanups.patch
+drivers-char-vt-cleanups.patch
+removes-unused-label-from-drivers-isdn-hisax-hisax_fcpcipnpc.patch
Little code tweaks.
number of patches in -mm: 728
number of changesets in external trees: 924
number of patches in -mm only: 704
total patches: 1628
All 728 patches:
linus.patch
ia64-audit-build-fix.patch
ia64 audit build fix
selinux-leak-in-error-path.patch
SELinux: Leak in error path
selinux-null-dereference-in-error-path.patch
SELinux: null dereference in error path
genhd-null-check-fix.patch
genhd: NULL checking fix
setup_per_zone_lowmem_reserve-oops-fix.patch
setup_per_zone_lowmem_reserve() oops fix
dv1394-ioctl-retval-fix.patch
dv1394 ioctl fix
macserial-build-fix.patch
macserial build fix
fix-audit-inode-filter.patch
fix audit inode filter
prism54-not-releasing-region.patch
prism54 not releasing region
fix-panic-in-26-with-bounced-bio-and-dm.patch
Fix panic in 2.6 with bounced bio and dm
partitions-msdosc.patch
partitions/msdos.c fix
ppc32-64-bit-resource-fix.patch
ppc32: 64 bit resource fix
nfsd--sgi-921857-find-broken-with-nohide-on-nfsv3.patch
SGI 921857: find broken with nohide on NFSv3
nfsd--exportfs-reduce-stack-usage.patch
nfsd: exportfs: reduce stack usage
nfsd--svcrpc-add-a-per-flavor-set_client-method.patch
nfsd: svcrpc: add a per-flavor set_client method
nfsd--svcrpc-rename-pg_authenticate.patch
nfsd: svcrpc: rename pg_authenticate
nfsd--svcrpc-move-export-table-checks-to-a-per-program-pg_add_client-method.patch
nfsd: svcrpc: move export table checks to a per-program pg_add_client method
nfsd--nfs4-use-new-pg_set_client-method-to-simplify-nfs4-callback-authentication.patch
nfsd: nfs4: use new pg_set_client method to simplify nfs4 callback authentication
nfsd--lockd-dont-try-to-match-callback-requests-against-export-table.patch
nfsd: lockd: don't try to match callback requests against export table
nfsd--nfsd-remove-pg_authenticate-field.patch
nfsd: nfsd: remove pg_authenticate field
nfsd--global-static-cleanups-for-nfsd.patch
nfsd: global/static cleanups for nfsd
nfsd--change-nfsd-reply-cache-to-use-listh-lists.patch
nfsd: change nfsd reply cache to use list.h lists
nfsd-discard-cache_hashed-flag-keeping-information-in-refcount-instead.patch
nfsd: discard CACHE_HASHED flag, keeping information in refcount instead.
ia64-config_apci_numa-fix.patch
ia64 CONFIG_APCI_NUMA fix
ia64-acpi-build-fix.patch
ia64 acpi build fix
bk-acpi.patch
acpi-video-pointer-size-fix.patch
acpi video pointer size fix
panasonic-acpi-driver.patch
Panasonic ACPI driver
pcc_acpi-build-fix.patch
pcc_acpi build fix
acpi-sleep-while-atomic-during-s3-resume-from-ram.patch
acpi: sleep-while-atomic during S3 resume from ram
acpi-report-errors-in-fanc.patch
ACPI: report errors in fan.c
acpi-flush-tlb-when-pagetable-changed.patch
acpi: flush TLB when pagetable changed
fix-an-issue-in-acpi-processor-and-container-drivers-related-with-kobject_hotplug.patch
Fix an issue in ACPI processor and container drivers related with kobject_hotplug()
acpi-fix-containers-notify-handler-to-handle-proper-cases-properly.patch
acpi: fix container's notify handler to handle proper cases properly
acpi_power_off-bug-fix.patch
acpi_power_off bug fix
new-sony_acpi-driver.patch
new sony_acpi driver
acpi-fix-a-if-statement-in-setup_sys_fs_device_files.patch
acpi: fix a if-statement in setup_sys_fs_device_files()
bk-agpgart.patch
bk-alsa.patch
sound-priv_data-offsetting-fix.patch
sound: priv_data offsetting fix
include-linux-soundcardh-endianness-fix.patch
include/linux/soundcard.h: endianness fix
bk-arm.patch
bk-cifs.patch
bk-cpufreq.patch
bk-driver-core.patch
bk-drm-via.patch
bk-i2c.patch
bk-i2c-saa7146-build-fix.patch
bk-i2c saa7146 build fix
preliminary-w83627ehf-hardware-monitoring-driver.patch
Preliminary w83627ehf hardware monitoring driver
bk-ide-dev.patch
ide_init_disk-fix.patch
ide_init_disk-fix
bk-ieee1394.patch
sbp2-fix-hang-on-unload.patch
sbp2: fix hang on unload
bk-input.patch
bk-dtor-input.patch
bk-jfs.patch
bk-kbuild.patch
bk-kconfig.patch
ppc-cpufreq-kconfig-fix.patch
ppc32: cpufreq kconfig fix
bk-netdev.patch
sis900-oops-fix.patch
sis900 kernel oops fix
bk-ntfs.patch
bk-pci.patch
mips-fixed-confliction-types-for.patch
mips: fixed confliction types for pcibios_align_resource
mips-fixed-kernel-code-resource.patch
mips: fixed kernel code resource initialization errors
e100-resource-warning-fix.patch
e100 resource warning fix
8139cp-resource-warning-fixes.patch
8139cp resource warning fixes
8139too-resource-warning-fixes.patch
8139too resource warning fixes
u64-is-not-long-long.patch
u64 is not long long
bk-scsi.patch
add-scsi-changer-driver.patch
add scsi changer driver
scsi-ch-build-fix.patch
scsi ch.c build fix
bk-serial.patch
bk-usb.patch
usb-hcd-u64-warning-fix.patch
usb hcd u64 warning fix
bk-watchdog.patch
6300esb-watchdog-driver.patch
6300ESB watchdog driver
mm.patch
add -mmN to EXTRAVERSION
sysfs-signedness-problem.patch
sysfs: Signedness problem
fix-help-for-acpi_container.patch
Fix help for ACPI_CONTAINER
vm-pageout-throttling.patch
vm: pageout throttling
orphaned-pagecache-memleak-fix.patch
orphaned pagecache memleak fix
swapspace-layout-improvements.patch
swapspace-layout-improvements
/proc/swaps negative Used
simpler-topdown-mmap-layout-allocator.patch
simpler topdown mmap layout allocator
vmscan-reclaim-swap_cluster_max-pages-in-a-single-pass.patch
vmscan: reclaim SWAP_CLUSTER_MAX pages in a single pass
stop-using-base-argument-in-__free_pages_bulk.patch
stop using "base" argument in __free_pages_bulk()
mempool-protect-buffer-overflow-in-mempool_resize.patch
mempool: protect buffer overflow in mempool_resize
fix-mincore-cornercases-overflow-caused-by-large-len.patch
Fix mincore cornercases: overflow caused by large "len"
copy_pte_range-latency-fix.patch
copy_pte_range latency fix
ia64-specific-dev-mem-handlers.patch
ia64 specific /dev/mem handlers
ia64-specific-dev-mem-handlers-fixes.patch
ia64-specific-dev-mem-handlers fixes
readahead-unneeded-prev_page-assignments.patch
readahead: unneeded prev_page assignments
readahead-cleanup-get_next_ra_size.patch
readahead: cleanup get_next_ra_size()
readahead-factor-out-duplicated-code.patch
readahead: factor out duplicated code
readahead-cleanup-blockable_page_cache_readahead.patch
readahead: cleanup blockable_page_cache_readahead()
allow-vma-merging-with-mlock-et-al.patch
allow vma merging with mlock et. al.
randomisation-global-sysctl.patch
Randomisation: global sysctl
randomisation-global-sysctl-fix.patch
randomisation-global-sysctl-fix
randomisation-infrastructure.patch
Randomisation: infrastructure
fix-compilation-of-uml-after-the-stack-randomization-patches.patch
Fix compilation of UML after the stack-randomization patches
randomisation-add-pf_randomize.patch
Randomisation: add PF_RANDOMIZE
randomisation-stack-randomisation.patch
Randomisation: stack randomisation
randomisation-mmap-randomisation.patch
Randomisation: mmap randomisation
randomisation-enable-by-default.patch
Randomisation: enable by default
randomisation-addr_no_randomize-personality.patch
Randomisation: add ADDR_NO_RANDOMIZE personality
randomisation-top-of-stack-randomization.patch
Randomisation: top-of-stack randomization
move-accounting-function-calls-out-of-critical-vm-code-pathspatch.patch
Move accounting function calls out of critical vm code paths
invalidate-range-of-pages-after-direct-io-write.patch
invalidate range of pages after direct IO write
write-and-wait-on-range-before-direct-io-read.patch
write and wait on range before direct io read
only-unmap-what-intersects-a-direct_io-op.patch
only unmap what intersects a direct_IO op
make-tree_lock-an-rwlock.patch
make mapping->tree_lock an rwlock
must-fix.patch
must fix lists update
must fix list update
mustfix update
must-fix update
mustfix lists
b44-bounce-buffer-fix.patch
b44 bounce buffering fix
drivers-net-wan-z85230c-interrupt-handling-fix.patch
drivers/net/wan/z85230.c interrupt handling fix
fix-driver-name-in-dl2k-as-returned-by-ethtool_gdrvinfo.patch
fix driver name in dl2k as returned by ETHTOOL_GDRVINFO
fix-buggy-ieee80211_crypt_-selects.patch
fix buggy IEEE80211_CRYPT_* selects
ppc-ppc64-abstract-cpu_feature-checks.patch
PPC/PPC64: Abstract cpu_feature checks.
ppc32-dont-create-tmp_gas_check.patch
ppc32: Don't create .tmp_gas_check
ppc32-fix-mv64x60-register-relocation-bug-in-bootwrapper.patch
ppc32: fix mv64x60 register relocation bug in bootwrapper
ppc32-update-arch-ppc-configs-pmac_defconfig.patch
ppc32: update arch/ppc/configs/pmac_defconfig
ppc32-artesyn-katana-platform-update.patch
ppc32: Artesyn Katana platform update
ppc32-artesyn-katana-enet-update.patch
ppc32: Artesyn Katana enet update
ppc32-move-irq_descstatus-irq_level-bit-setup-to-xilinx_picc.patch
ppc32: move irq_desc[].status, IRQ_LEVEL bit setup to xilinx_pic.c
ppc32-lindentify-ppc4xx-pic-driver.patch
ppc32: Lindentify PPC4xx PIC driver
ppc32-ppc4xx-pic-ack-parent-uic-in-disable_irq.patch
ppc32: PPC4xx PIC: ack parent UIC in disable_irq
ppc32-incorrect-define-in-include-asm-ppc-cpm2h.patch
ppc32: incorrect #define in include/asm-ppc/cpm2.h
ppc32-bogus-definition-of-__cmpxchg_u32.patch
ppc32: Bogus definition of __cmpxchg_u32()
ppc32-fix-whitespace-for-85xx-cds-common-platform.patch
ppc32: fix whitespace for 85xx CDS common platform
ppc32-move-from-using-define-svr_-to-cur_ppc_sys_spec-name.patch
ppc32: Move from using #define SVR_ to cur_ppc_sys_spec name for 85xx platform
ppc32-mv64360_pic-non-zero-irq-base.patch
ppc32: mv64360_pic non-zero irq base
ppc32-add-gpio-irq-definitions-for-mv64x60-parts.patch
ppc32: Add GPIO/IRQ definitions for mv64x60 parts
ppc64-remove-unneeded-includes-from-pseries_nvramc.patch
remove unneeded includes from pSeries_nvram.c
ppc64-collect-and-export-low-level-cpu-usage-statistics.patch
ppc64: collect and export low-level cpu usage statistics
ppc64-move-systemcfg-out-of-heads.patch
ppc64: Move systemcfg out of head.S
ppc64-defconfig-updates.patch
ppc64: defconfig updates
ppc64-distribute-export_symbols.patch
ppc64: distribute EXPORT_SYMBOLs
ppc64-implement-a-vdso-and-use-it-for-signal-trampoline.patch
ppc64: Implement a vDSO and use it for signal trampoline
ppc64-implement-a-vdso-and-use-it-for-signal-trampoline-gas-workaround.patch
ppc64-implement-a-vdso-and-use-it-for-signal-trampoline gas workaround
ppc64-generic-hotplug-cpu-support.patch
ppc64: generic hotplug cpu support
ppc64-generic-hotplug-cpu-support-fix.patch
ppc64-generic-hotplug-cpu-support-fix
ppc64-disable-hmt-for-rs64-cpus.patch
ppc64: disable HMT for RS64 cpus
use-vmlinux-during-make-install-on-ppc64.patch
ppc64: use vmlinux during make install on ppc64
ppc64-functions-to-reserve-performance-monitor-hardware.patch
ppc64: functions to reserve performance monitor hardware
ppc64-fix-thinko-in-prom_initc.patch
ppc64: Fix thinko in prom_init.c
ppc64-fix-zimage-wrapper-incorrect-size-to-flush_cache.patch
ppc64: Fix zImage wrapper incorrect size to flush_cache()
mips-add-tanbac-tb0219-base-board-driver.patch
mips: add TANBAC TB0219 base board driver
allow-hot-add-enabled-i386-numa-box-to-boot.patch
Allow hot-add enabled i386 NUMA box to boot
refactor-i386-memory-setup.patch
x86: refactor memory setup
consolidate-set_max_mapnr_init-implementations.patch
x86: consolidate set_max_mapnr_init() implementations
remove-free_all_bootmem-define.patch
x86: remove-free_all_bootmem() #define
out-of-line-x86-put_user-implementation.patch
out-of-line x86 "put_user()" implementation
fix-iounmap-and-a-pageattr-memleak-x86-and-x86-64.patch
fix iounmap and a pageattr memleak (x86 and x86-64)
determine-scx200-cb-address-at-run-time.patch
Determine SCx200 CB address at run-time
x86_64-dump-stack-in-early-exception.patch
x86_64-dump-stack-in-early-exception
iounmap-isa-special-case.patch
x86: iounmap() isa special case
support-for-geode-cpus.patch
Support for GEODE CPUs
make-highmem_start-access-only-valid-addresses-i386.patch
make highmem_start access only valid addresses (i386)
i386-c99-initializers-for-hw_interrupt_type-structures.patch
i386: C99 initializers for hw_interrupt_type structures
x86-memset-the-i386-numa-pgdats-in-arch-code.patch
x86: memset the i386 numa pgdats in arch code
x86-do-not-unnecessarily-memset-the-pgdats.patch
x86: do not unnecessarily memset the pgdats
x86-abstract-discontigmem-setup.patch
x86: abstract discontigmem setup
x86-abstract-discontigmem-setup-fix.patch
x86: abstract discontigmem setup fix
x86-abstract-discontigmem-setup-ppc64-fix.patch
x86-abstract-discontigmem-setup ppc64 fix
x86-allow-srat-to-parse-empty-nodes.patch
x86: allow SRAT to parse empty nodes
x86-srat-cleanup-make-calculations-and-indenting-level-more-sane.patch
x86: SRAT cleanup: make calculations and indenting level more sane
remove-dead-cyrix-centaur-mtrr-init-code.patch
remove dead cyrix/centaur mtrr init code
x86_64-hugetlb-fix.patch
x86_64: hugetlb fix
xen-vmm-4-add-ptep_establish_new-to-make-va-available.patch
Xen VMM #4: add ptep_establish_new to make va available
xen-vmm-4-return-code-for-arch_free_page.patch
Xen VMM #4: return code for arch_free_page
xen-vmm-4-return-code-for-arch_free_page-fix.patch
Get rid of arch_free_page() warning
xen-vmm-4-runtime-disable-of-vt-console.patch
Xen VMM #4: runtime disable of VT console
xen-vmm-4-has_arch_dev_mem.patch
Xen VMM #4: HAS_ARCH_DEV_MEM
xen-vmm-4-split-free_irq-into-teardown_irq.patch
Xen VMM #4: split free_irq into teardown_irq
altix-ignore-input-during-early-boot.patch
Altix: Ignore input during early boot
altix-ioc4-serial-driver-support.patch
Altix: ioc4 serial driver support
swsusp-do-not-use-higher-order-memory-allocations-on-suspend.patch
swsusp: do not use higher order memory allocations on suspend
update-suspend-to-ram-vs-video-documentation.patch
Update suspend-to-RAM vs. video documentation
m32r-use-generic-bugh.patch
m32r: use generic bug.h
make-sysrq-f-call-oom_kill.patch
make sysrq-F call oom_kill()
allow-admin-to-enable-only-some-of-the-magic-sysrq-functions.patch
Allow admin to enable only some of the Magic-Sysrq functions
fix-partial-sysrq-setting.patch
Fix partial sysrq setting
sort-out-pci_rom_address_enable-vs-ioresource_rom_enable.patch
Sort out PCI_ROM_ADDRESS_ENABLE vs IORESOURCE_ROM_ENABLE
irqpoll.patch
irqpoll
poll-mini-optimisations.patch
poll: mini optimisations
mtrr-size-and-base-debug.patch
mtrr size-and-base debugging
cleanup-vc-array-access.patch
cleanup vc array access
remove-console_macrosh.patch
remove console_macros.h
merge-vt_struct-into-vc_data.patch
merge vt_struct into vc_data
jbd-journal-overflow-fix-2.patch
jbd: journal overflow fix #2
jbd-fix-against-journal-overflow.patch
JBD: reduce stack and number of journal descriptors
jbd-log-space-management-optimization.patch
JBD: log space management optimization
factor-out-phase-6-of-journal_commit_transaction.patch
Factor out phase 6 of journal_commit_transaction
ext3-cleanup-1.patch
ext3 cleanup 1
ext3-free-block-accounting-fix.patch
ext3: free block accounting fix
ext3_test_root-speedup.patch
ext3_test_root() speedup
i4l-new-hfc_usb-driver-version.patch
i4l: new hfc_usb driver version
i4l-hfc-4s-and-hfc-8s-driver.patch
i4l: HFC-4S and HFC-8S driver
fix-race-between-the-nmi-code-and-the-cmos-clock.patch
Fix race between the NMI code and the CMOS clock
cant-unmount-bad-inode.patch
Can't unmount bad inode
iounmap-debugging.patch
iounmap debugging
oss-support-for-ac97-low-power-codecs.patch
OSS Support for AC97 low power codecs
fix-kallsyms-insmod-rmmod-race.patch
Fix kallsyms/insmod/rmmod race
d_drop-should-use-per-dentry-lock.patch
d_drop should use per dentry lock
detect-soft-lockups.patch
detect soft lockups
serialize-access-to-ide-devices.patch
serialize access to ide devices
add-struct-request-end_io-callback.patch
Add struct request end_io callback
rework-core-barrier-support.patch
rework core barrier support
scsi_io_completion-sense-copy.patch
scsi_io_completion sense copy
blk_execute_rq-oops-on-fast-completion.patch
blk_execute_rq() oops on fast completion
annotate-proc-pid-maps-with--markers.patch
annotate /proc/<PID>/maps with [heap]/[stack]/[vdso] markers
serial-add-nec-vr4100-series-serial-support.patch
serial: add NEC VR4100 series serial support
serial-add-the-output-interface-control-to.patch
serial: add the output interface control to VR41xx SIU driver
sys_setpriority-euid-semantics-fix.patch
sys_setpriority() euid semantics fix
add-tcsbrkp-to-compat_ioctlh.patch
add TCSBRKP to compat_ioctl.h
areca-raid-linux-scsi-driver.patch
ARECA RAID Linux scsi driver
areca-raid-linux-scsi-driver-fix.patch
areca-raid-linux-scsi-driver-fix
drivers-scsi-arcmsr-arcmsrc-cleanups.patch
drivers/scsi/arcmsr/arcmsr.c cleanups
minor-conceptual-fix-for-proc-kcore-header-size.patch
minor conceptual fix for /proc/kcore header size
add-compiler-gcc4h.patch
add compiler-gcc4.h
rt-lsm.patch
RT-LSM
convert-proc-driver-rtc-to-seq_file.patch
convert /proc/driver/rtc to seq_file.
drivers-char-lpc-race-fix.patch
drivers/char/lp.c race fix
clean-up-and-unify-asm-resourceh-files.patch
clean up and unify asm-*/resource.h files
add-local-bio-pool-support-and-modify-dm.patch
add local bio pool support and modify dm
add-local-bio-pool-support-and-modify-dm-uninline-zero_fill_bio.patch
uninline-zero_fill_bio
add-local-bio-pool-support-and-modify-dm-use-global-bio-set-pool.patch
add-local-bio-pool-support-and-modify-dm: use global bio set pool
fix-ufs-quota.patch
Implement quota reading and writing functions for UFS.
run-softirqs-on-proper-processor-on-offline.patch
Run softirqs on proper processor on offline
aops-based-loop-io.patch
a_ops-based loop I/O
tty-output-lossage-fix.patch
tty output lossage fix
add-timing-information-to-printk-messages.patch
add timing information to printk messages
seccomp.patch
seccomp: secure computing support
minor-bttv-driver-update.patch
minor bttv driver update
tv-tuner-module-update.patch
tv tuner module update.
remove-mount-option-parsing-from-procfs.patch
remove mount option parsing from procfs
credits-update.patch
CREDITS Update
bksend-example-script-fix.patch
bksend example script fix
export-kallsyms_lookup_name.patch
export kallsyms_lookup_name()
add-nobh_writepage-support.patch
Add nobh_writepage() support
fix-1-wire-dallas-in-bigendian-machines.patch
Fix 1-Wire Dallas in bigendian machines
reiserfs-return-eio-instead-of-calling-bug-when-rename.patch
reiserfs: return -EIO instead of calling BUG() when rename goes wrong
keys-doc-update-on-locking.patch
Keys: Doc update on locking
detangle-audith-from-fsh.patch
detangle audit.h from fs.h
ext3_new_inode-failure-handling-missing-check.patch
ext3_new_inode() failure handling missing check
loglevel-boot-option.patch
loglevel boot option
cross-compile-scripts-lxdialog-on-aix.patch
cross-compile scripts/lxdialog/ on AIX
base-small-introduce-the-config_base_small-flag.patch
base-small: introduce the CONFIG_BASE_SMALL flag
base-small-shrink-chrdevs-hash.patch
base-small: shrink chrdevs hash
base-small-shrink-pid-tables.patch
base-small: shrink PID tables
base-small-shrink-uid-hash.patch
base-small: shrink UID hash
base-small-shrink-futex-queues.patch
base-small: shrink futex queues
base-small-shrink-timer-hashes.patch
base-small: shrink timer hashes
base-small-shrink-console-buffer.patch
base-small: shrink console buffer
lib-sort-heapsort-implementation-of-sort.patch
lib/sort: Heapsort implementation of sort()
Fix up bustedness in menuconfig
lib-sort-turn-off-self-test.patch
lib/sort: turn off self-test
lib-sort-replace-qsort-in-xfs.patch
lib/sort: Replace qsort in XFS
lib-sort-replace-insertion-sort-in-exception-tables.patch
lib/sort: Replace insertion sort in exception tables
lib-sort-replace-insertion-sort-in-ia64-exception-tables.patch
lib/sort: Replace insertion sort in IA64 exception tables
lib-sort-use-generic-sort-on-x86_64.patch
lib/sort: Use generic sort on x86_64
inotify.patch
inotify
inotify-locking-fix.patch
inotify locking fix
random-pt2-cleanup-waitqueue-logic-fix-missed-wakeup.patch
random: cleanup waitqueue logic, fix missed wakeup
random-pt2-kill-pool-clearing.patch
random: kill pool clearing
random-pt2-combine-legacy-ioctls.patch
random: combine legacy ioctls
random-pt2-re-init-all-pools-on-zero.patch
random: re-init all pools on zero
random-pt2-simplify-initialization.patch
random: simplify initialization
random-pt2-kill-memsets-of-static-data.patch
random: kill memsets of static data
random-pt2-kill-dead-extract_state-struct.patch
random: kill dead extract_state struct
random-pt2-kill-22-compat-waitqueue-defs.patch
random: kill 2.2 compat waitqueue defs
random-pt2-kill-redundant-rotate_left-definitions.patch
random: kill redundant rotate_left definitions
random-pt2-kill-redundant-rotate_left-definitions-fix.patch
rol32 thinko
random-pt2-kill-misnamed-log2.patch
random: kill misnamed log2
random-pt3-more-meaningful-pool-names.patch
random: More meaningful pool names
random-pt3-static-allocation-of-pools.patch
random: Static allocation of pools
random-pt3-static-sysctl-bits.patch
random: Static sysctl bits
random-pt3-catastrophic-reseed-checks.patch
random: Catastrophic reseed checks
random-pt3-entropy-reservation-accounting.patch
random: Entropy reservation accounting
random-pt3-reservation-flag-in-pool-struct.patch
random: Reservation flag in pool struct
random-pt3-reseed-pointer-in-pool-struct.patch
random: Reseed pointer in pool struct
random-pt3-break-up-extract_user.patch
random: Break up extract_user
random-pt3-remove-dead-md5-copy.patch
random: Remove dead MD5 copy
random-pt3-simplify-hash-folding.patch
random: Simplify hash folding
random-pt3-clean-up-hash-buffering.patch
random: Clean up hash buffering
random-pt3-remove-entropy-batching.patch
random: Remove entropy batching
random-pt4-create-new-rol32-ror32-bitops.patch
random: Create new rol32/ror32 bitops
random-pt4-use-them-throughout-the-tree.patch
random: Use them throughout the tree
random-pt4-kill-the-sha-variants.patch
random: Kill the SHA variants
random-pt4-cleanup-sha-interface.patch
random: Cleanup SHA interface
random-pt4-move-sha-code-to-lib.patch
random: Move SHA code to lib/
random-pt4-replace-sha-with-faster-version.patch
random: Replace SHA with faster version
random-pt4-update-cryptolib-to-use-sha-fro-lib.patch
random: Update cryptolib to use SHA fro lib
random-pt4-move-halfmd4-to-lib.patch
random: Move halfmd4 to lib
random-pt4-kill-duplicate-halfmd4-in-ext3-htree.patch
random: Kill duplicate halfmd4 in ext3 htree
random-pt4-kill-duplicate-halfmd4-in-ext3-htree-fix.patch
random-pt4-kill-duplicate-halfmd4-in-ext3-htree-fix
random-pt4-simplify-and-shrink-syncookie-code.patch
random: Simplify and shrink syncookie code
random-pt4-move-syncookies-to-net.patch
random: Move syncookies to net/
speedup-proc-pid-maps.patch
Speed up /proc/pid/maps
posix-timers-tidy-up-clock-interfaces-and-consolidate-dispatch-logic.patch
posix-timers: tidy up clock interfaces and consolidate dispatch logic
posix-timers-high-resolution-cpu-clocks-for-posix-clock_-syscalls.patch
posix-timers: high-resolution CPU clocks for POSIX clock_* syscalls
posix-timers-tidy-up-clock-interfaces-and-consolidate-dispatch-logic-cleanup.patch
posix-timers: tidy up clock interfaces and consolidate dispatch logic cleanup
posix-timers-fix-posix-timers-signals-lock-order.patch
posix-timers: fix posix-timers signals lock order
posix-timers-cpu-clock-support-for-posix-timers.patch
posix-timers: CPU clock support for POSIX timers
posix-timers-cpu-clock-support-for-posix-timers-fix.patch
posix-timers: CPU clock support for POSIX timers (fix)
posix-timers-cpu-clock-support-for-posix-timers-fix3.patch
fix posix-timer initialization
panic-in-check_process_timers.patch
PANIC in check_process_timers()
make-itimer_real-per-process.patch
make ITIMER_REAL per-process
make-itimer_prof-itimer_virtual-per-process.patch
make ITIMER_PROF, ITIMER_VIRTUAL per-process
make-itimer_prof-itimer_virtual-per-process-fix.patch
process-wide itimer typo fixes
make-rlimit_cpu-sigxcpu-per-process.patch
make RLIMIT_CPU/SIGXCPU per-process
override-rlimit_sigpending-for-non-rt-signals.patch
override RLIMIT_SIGPENDING for non-RT signals
show-rlimit_sigpending-usage-in-proc-pid-status.patch
show RLIMIT_SIGPENDING usage in /proc/PID/status
set-rlimit_sigpending-limit-based-on-rlimit_nproc.patch
set RLIMIT_SIGPENDING limit based on RLIMIT_NPROC
pcmcia-update-vrc4171_card.patch
pcmcia: update vrc4171_card
pcmcia-yenta_socket-ti4150-support.patch
pcmcia: yenta_socket - ti4150 support
pcmcia-pd6729-convert-to-pci_register_driver.patch
pcmcia: pd6729 - convert to pci_register_driver()
pcmcia-rsrc_nonstatic-sysfs-output.patch
pcmcia: rsrc_nonstatic: sysfs output
pcmcia-rsrc_nonstatic-sysfs-input.patch
pcmcia: rsrc_nonstatic: sysfs input
pcmcia-mark-resource-setup-as-done.patch
pcmcia: mark resource setup as done
pcmcia-pcmcia_device_probe.patch
pcmcia: pcmcia_device_probe
pcmcia-pcmcia_device_remove.patch
pcmcia: pcmcia_device_remove
pcmcia-pcmcia_device_add.patch
pcmcia: pcmcia_device_add
pcmcia-use-bus_rescan_devices.patch
pcmcia: use bus_rescan_devices
pcmcia-add-pcmcia-devices-autonomously.patch
pcmcia: add pcmcia devices autonomously
pcmcia-determine-some-useful-information-about-devices.patch
pcmcia: determine some useful information about devices
pcmcia-per-device-sysfs-output.patch
pcmcia: per-device sysfs output
pcmcia-dont-send-eject-request-events-to-userspace.patch
pcmcia: don't send eject request events to userspace
pcmcia-hotplug-event-for-pcmcia-devices.patch
pcmcia: hotplug event for PCMCIA devices
pcmcia-hotplug-event-for-pcmcia-socket-devices.patch
pcmcia: hotplug event for PCMCIA socket devices
pcmcia-device-and-driver-matching.patch
pcmcia: device and driver matching
pcmcia-check-for-invalid-crc32-hashes-in-id_tables.patch
pcmcia: check for invalid crc32 hashes in id_tables
pcmcia-match-for-fake-cis.patch
pcmcia: match for fake CIS
pcmcia-export-cis-in-sysfs.patch
pcmcia: export CIS in sysfs
pcmcia-cis-overrid-via-sysfs.patch
pcmcia: CIS overrid via sysfs
pcmcia-match-anonymous-cards.patch
pcmcia: match "anonymous" cards
pcmcia-allow-function-id-based-match.patch
pcmcia: allow function-ID based match
pcmcia-file2alias.patch
pcmcia: file2alias
pcmcia-request-cis-via-firmware-interface.patch
pcmcia: request CIS via firmware interface
pcmcia-cleanups.patch
pcmcia: cleanups
pcmcia-rescan-bus-always-upon-echoing-into-setup_done.patch
pcmcia: rescan bus always upon echoing into setup_done
pcmcia-id_table-for-serial_cs.patch
pcmcia: id_table for serial_cs
pcmcia-id_table-for-3c574_cs.patch
pcmcia: id_table for 3c574_cs
pcmcia-id_table-for-3c589_cs.patch
pcmcia: id_table for 3c589_cs
pcmcia-id_table-for-aha152x.patch
pcmcia: id_table for aha152x
pcmcia-id_table-for-airo_cs.patch
pcmcia: id_table for airo_cs
pcmcia-id_table-for-axnet_cs.patch
pcmcia: id_table for axnet_cs
pcmcia-id_table-for-fdomain_stub.patch
pcmcia: id_table for fdomain_stub
pcmcia-id_table-for-fmvj18x_cs.patch
pcmcia: id_table for fmvj18x_cs
pcmcia-id_table-for-ibmtr_cs.patch
pcmcia: id_table for ibmtr_cs
pcmcia-id_table-for-netwave_cs.patch
pcmcia: id_table for netwave_cs
pcmcia-id_table-for-nmclan_cs.patch
pcmcia: id_table for nmclan_cs
pcmcia-id_table-for-teles_cs.patch
pcmcia: id_table for teles_cs
pcmcia-id_table-for-ray_cs.patch
pcmcia: id_table for ray_cs
pcmcia-id_table-for-wavelan_cs.patch
pcmcia: id_table for wavelan_cs
pcmcia-id_table-for-sym53c500_csc.patch
pcmcia: id_table for sym53c500_cs.c
pcmcia-id_table-for-qlogic_stubc.patch
pcmcia: id_table for qlogic_stub.c
pcmcia-id_table-for-smc91c92_csc.patch
pcmcia: id_table for smc91c92_cs.c
pcmcia-id_table-for-orinoco_cs.patch
pcmcia: id_table for orinoco_cs
pcmcia-id_table-for-xirc2ps_csc.patch
pcmcia: id_table for xirc2ps_cs.c
pcmcia-id_table-for-ide_csc.patch
pcmcia: id_table for ide_cs.c
pcmcia-id_table-for-parport_csc.patch
pcmcia: id_table for parport_cs.c
pcmcia-id_table-for-pcnet_csc.patch
pcmcia: id_table for pcnet_cs.c
pcmcia-id_table-for-pcmciamtdc.patch
pcmcia: id_table for pcmciamtd.c
pcmcia-id_table-for-vxpocketc.patch
pcmcia: id_table for vxpocket.c
pcmcia-id_table-for-atmel_csc.patch
pcmcia: id_table for atmel_cs.c
pcmcia-id_table-for-atmel_csc-fix.patch
pcmcia-id_table-for-atmel_csc fix
pcmcia-id_table-for-avma1_csc.patch
pcmcia: id_table for avma1_cs.c
pcmcia-id_table-for-avm_csc.patch
pcmcia: id_table for avm_cs.c
pcmcia-id_table-for-bluecard_csc.patch
pcmcia: id_table for bluecard_cs.c
pcmcia-id_table-for-bt3c_csc.patch
pcmcia: id_table for bt3c_cs.c
pcmcia-id_table-for-btuart_csc.patch
pcmcia: id_table for btuart_cs.c
pcmcia-id_table-for-com20020_csc.patch
pcmcia: id_table for com20020_cs.c
pcmcia-id_table-for-dtl1_csc.patch
pcmcia: id_table for dtl1_cs.c
pcmcia-id_table-for-elsa_csc.patch
pcmcia: id_table for elsa_cs.c
pcmcia-id_table-for-ixj_pcmciac.patch
pcmcia: id_table for ixj_pcmcia.c
pcmcia-id_table-for-nsp_csc.patch
pcmcia: id_table for nsp_cs.c
pcmcia-id_table-for-sedlbauer_csc.patch
pcmcia: id_table for sedlbauer_cs.c
pcmcia-id_table-for-wl3501_csc.patch
pcmcia: id_table for wl3501_cs.c
pcmcia-id_table-for-pdaudiocfc.patch
pcmcia: id_table for pdaudiocf.c
nfs-fix_vfsflock.patch
VFS: Fix structure initialization in locks_remove_flock()
nfs-flock.patch
NFS: Add emulation of BSD flock() in terms of POSIX locks on the server
nfsacl-acl-kconfig-cleanup.patch
nfsacl: acl kconfig cleanup
nfsacl-return-enosys-for-rpc-programs-that-are-unavailable.patch
nfsacl: Return -ENOSYS for RPC programs that are unavailable
nfsacl-add-missing-eopnotsupp-=-nfs3err_notsupp-mapping-in-nfsd.patch
nfsacl: Add missing -EOPNOTSUPP => NFS3ERR_NOTSUPP mapping in nfsd
nfsacl-allow-multiple-programs-to-listen-on-the-same-port.patch
nfsacl: Allow multiple programs to listen on the same port
nfsacl-allow-multiple-programs-to-share-the-same-transport.patch
nfsacl: Allow multiple programs to share the same transport
nfsacl-lazy-rpc-receive-buffer-allocation.patch
nfsacl: Lazy RPC receive buffer allocation
nfsacl-encode-and-decode-arbitrary-xdr-arrays.patch
nfsacl: Encode and decode arbitrary XDR arrays
nfsacl-add-noacl-nfs-mount-option.patch
nfsacl: Add noacl nfs mount option
nfsacl-infrastructure-and-server-side-of-nfsacl.patch
nfsacl: /16] Infrastructure and server side of nfsacl
nfsacl-solaris-nfsacl-workaround.patch
nfsacl: Solaris nfsacl workaround
nfsacl-nfs-mknod-cleanup.patch
nfsacl: nfs mknod cleanup
nfsacl-nfs-mkdir-cleanup.patch
nfsacl: nfs mkdir cleanup
nfsacl-client-side-of-nfsacl.patch
nfsacl: Client side of nfsacl
nfsacl-kconfig-hack.patch
nfsacl kconfig hack
nfsacl-client-side-of-nfsacl-build-fix.patch
nfsacl-client-side-of-nfsacl-build fix
nfsacl-acl-umask-handling-workaround-in-nfs-client.patch
nfsacl: ACL umask handling workaround in nfs client
nfsacl-cache-acls-on-the-nfs-client-side.patch
nfsacl: Cache acls on the nfs client side
kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
Fix stack overflow test for non-8k stacks
kgdb-ga.patch fix for i386 single-step into sysenter
fix TRAP_BAD_SYSCALL_EXITS on i386
add TRAP_BAD_SYSCALL_EXITS config for i386
kgdb-is-incompatible-with-kprobes
kgdb-ga-build-fix
kgdb-ga-fixes
kgdb: kill off highmem_start_page
kgdb documentation fix
kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address
kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes
kgdb-x86_64-fix
kgdb-x86_64-serial-fix
kprobes exception notifier fix
journal_add_journal_head-debug.patch
journal_add_journal_head-debug
list_del-debug.patch
list_del debug check
page-owner-tracking-leak-detector.patch
Page owner tracking leak detector
make-page_owner-handle-non-contiguous-page-ranges.patch
make page_owner handle non-contiguous page ranges
unplug-can-sleep.patch
unplug functions can sleep
firestream-warnings.patch
firestream warnings
periodically-scan-redzone-entries-and-slab-control-structures.patch
periodically scan redzone entries and slab control structures
perfctr-core.patch
perfctr: core
perfctr: remove bogus perfctr_sample_thread() calls
perfctr-i386.patch
perfctr: i386
perfctr-x86-core-updates.patch
perfctr x86 core updates
perfctr-x86-driver-updates.patch
perfctr x86 driver updates
perfctr-x86-driver-cleanup.patch
perfctr: x86 driver cleanup
perfctr-prescott-fix.patch
Prescott fix for perfctr
perfctr-x86-update-2.patch
perfctr x86 update 2
perfctr-x86_64.patch
perfctr: x86_64
perfctr-x86_64-core-updates.patch
perfctr x86_64 core updates
perfctr-ppc.patch
perfctr: PowerPC
perfctr-ppc32-driver-update.patch
perfctr: ppc32 driver update
perfctr-ppc32-mmcr0-handling-fixes.patch
perfctr ppc32 MMCR0 handling fixes
perfctr-ppc32-update.patch
perfctr ppc32 update
perfctr-ppc32-update-2.patch
perfctr ppc32 update
perfctr-virtualised-counters.patch
perfctr: virtualised counters
perfctr-remap_page_range-fix.patch
virtual-perfctr-illegal-sleep.patch
virtual perfctr illegal sleep
make-perfctr_virtual-default-in-kconfig-match-recommendation.patch
Make PERFCTR_VIRTUAL default in Kconfig match recommendation in help text
perfctr-ifdef-cleanup.patch
perfctr ifdef cleanup
perfctr-update-2-6-kconfig-related-updates.patch
perfctr: Kconfig-related updates
perfctr-virtual-updates.patch
perfctr virtual updates
perfctr-virtual-cleanup.patch
perfctr: virtual cleanup
perfctr-ppc32-preliminary-interrupt-support.patch
perfctr ppc32 preliminary interrupt support
perfctr-update-5-6-reduce-stack-usage.patch
perfctr: reduce stack usage
perfctr-interrupt-support-kconfig-fix.patch
perfctr interrupt_support Kconfig fix
perfctr-low-level-documentation.patch
perfctr low-level documentation
perfctr-inheritance-1-3-driver-updates.patch
perfctr inheritance: driver updates
perfctr-inheritance-2-3-kernel-updates.patch
perfctr inheritance: kernel updates
perfctr-inheritance-3-3-documentation-updates.patch
perfctr inheritance: documentation updates
perfctr-inheritance-locking-fix.patch
perfctr inheritance locking fix
perfctr-api-changes-first-step.patch
perfctr API changes: first step
perfctr-virtual-update.patch
perfctr virtual update
perfctr-x86-64-ia32-emulation-fix.patch
perfctr x86-64 ia32 emulation fix
perfctr-sysfs-update-1-4-core.patch
perfctr sysfs update: core
perfctr-sysfs-update.patch
Perfctr sysfs update
perfctr-sysfs-update-2-4-x86.patch
perfctr sysfs update: x86
perfctr-sysfs-update-3-4-x86-64.patch
perfctr sysfs update: x86-64
perfctr: syscall numbers in x86-64 ia32-emulation
perfctr x86_64 native syscall numbers fix
perfctr-sysfs-update-4-4-ppc32.patch
perfctr sysfs update: ppc32
perfctr-2710-api-update-1-4-common.patch
perfctr-2.7.10 API update 1/4: common
perfctr-2710-api-update-2-4-i386.patch
perfctr-2.7.10 API update 2/4: i386
perfctr-2710-api-update-3-4-x86_64.patch
perfctr-2.7.10 API update 3/4: x86_64
perfctr-2710-api-update-4-4-ppc32.patch
perfctr-2.7.10 API update 4/4: ppc32
sched-timestamp-fixes.patch
sched: timestamp fixes
sched-timestamp-fixes-fix.patch
timestamp fixes fix
sched-improve-pinned-task-handling.patch
sched: improve pinned task handling
sched-improve-pinned-task-handling-fix.patch
sched-improve-pinned-task-handling fix
sched-rework-schedstats.patch
sched: rework schedstats
sched-find_busiest_group-fixlets.patch
sched: find_busiest_group fixlets
sched-find_busiest_group-cleanup.patch
sched: find_busiest_group cleanup
sched-no-aggressive-idle-balancing.patch
sched: no aggressive idle balancing
sched-better-active-balancing-heuristic.patch
sched: better active balancing heuristic
sched-generalised-cpu-load-averaging.patch
sched: generalised CPU load averaging
sched-less-affine-wakups.patch
sched: less affine wakups
sched-remove-aggressive-idle-balancing.patch
sched: remove aggressive idle balancing
sched-sched-domains-aware-balance-on-fork.patch
sched: sched-domains aware balance-on-fork
sched-schedstats-additions-for-sched-balance-fork.patch
sched: schedstats additions for sched-balance-fork
sched-basic-tuning.patch
sched: basic tuning
random-ia64-sched-domains-values.patch
random ia64 sched-domains values
add-do_proc_doulonglongvec_minmax-to-sysctl-functions.patch
Add do_proc_doulonglongvec_minmax to sysctl functions
add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix
add-do_proc_doulonglongvec_minmax-to-sysctl-functions fix 2
add-sysctl-interface-to-sched_domain-parameters.patch
Add sysctl interface to sched_domain parameters
allow-x86_64-to-reenable-interrupts-on-contention.patch
Allow x86_64 to reenable interrupts on contention
i386-cpu-hotplug-updated-for-mm.patch
i386 CPU hotplug updated for -mm
ppc64: fix hotplug cpu
disable-atykb-warning.patch
disable atykb "too many keys pressed" warning
export-file_ra_state_init-again.patch
Export file_ra_state_init() again
cachefs-filesystem.patch
CacheFS filesystem
numa-policies-for-file-mappings-mpol_mf_move-cachefs.patch
numa-policies-for-file-mappings-mpol_mf_move for cachefs
cachefs-release-search-records-lest-they-return-to-haunt-us.patch
CacheFS: release search records lest they return to haunt us
fix-64-bit-problems-in-cachefs.patch
Fix 64-bit problems in cachefs
cachefs-fixed-typos-that-cause-wrong-pointer-to-be-kunmapped.patch
cachefs: fixed typos that cause wrong pointer to be kunmapped
cachefs-return-the-right-error-upon-invalid-mount.patch
CacheFS: return the right error upon invalid mount
fix-cachefs-barrier-handling-and-other-kernel-discrepancies.patch
Fix CacheFS barrier handling and other kernel discrepancies
remove-error-from-linux-cachefsh.patch
Remove #error from linux/cachefs.h
cachefs-warning-fix-2.patch
cachefs warning fix 2
cachefs-linkage-fix-2.patch
cachefs linkage fix
cachefs-build-fix.patch
cachefs build fix
cachefs-documentation.patch
CacheFS documentation
add-page-becoming-writable-notification.patch
Add page becoming writable notification
add-page-becoming-writable-notification-fix.patch
do_wp_page_mk_pte_writable() fix
add-page-becoming-writable-notification-build-fix.patch
add-page-becoming-writable-notification build fix
provide-a-filesystem-specific-syncable-page-bit.patch
Provide a filesystem-specific sync'able page bit
provide-a-filesystem-specific-syncable-page-bit-fix.patch
provide-a-filesystem-specific-syncable-page-bit-fix
provide-a-filesystem-specific-syncable-page-bit-fix-2.patch
provide-a-filesystem-specific-syncable-page-bit-fix-2
make-afs-use-cachefs.patch
Make AFS use CacheFS
afs-cachefs-dependency-fix.patch
afs-cachefs-dependency-fix
split-general-cache-manager-from-cachefs.patch
Split general cache manager from CacheFS
turn-cachefs-into-a-cache-backend.patch
Turn CacheFS into a cache backend
rework-the-cachefs-documentation-to-reflect-fs-cache-split.patch
Rework the CacheFS documentation to reflect FS-Cache split
update-afs-client-to-reflect-cachefs-split.patch
Update AFS client to reflect CacheFS split
x86-rename-apic_mode_exint.patch
kexec: x86: rename APIC_MODE_EXINT
x86-local-apic-fix.patch
kexec: x86: local apic fix
x86_64-e820-64bit.patch
kexec: x86_64: e820 64bit fix
x86-i8259-shutdown.patch
kexec: x86: i8259 shutdown: disable interrupts
x86_64-i8259-shutdown.patch
kexec: x86_64: add i8259 shutdown method
x86-apic-virtwire-on-shutdown.patch
kexec: x86: resture apic virtual wire mode on shutdown
x86_64-apic-virtwire-on-shutdown.patch
kexec: x86_64: restore apic virtual wire mode on shutdown
vmlinux-fix-physical-addrs.patch
kexec: vmlinux: fix physical addresses
x86-vmlinux-fix-physical-addrs.patch
kexec: x86: vmlinux: fix physical addresses
x86_64-vmlinux-fix-physical-addrs.patch
kexec: x86_64: vmlinux: fix physical addresses
x86_64-entry64.patch
kexec: x86_64: add 64-bit entry
x86-config-kernel-start.patch
kexec: x86: add CONFIG_PYSICAL_START
x86_64-config-kernel-start.patch
kexec: x86_64: add CONFIG_PHYSICAL_START
kexec-kexec-generic.patch
kexec: add kexec syscalls
kexec-kexec-generic-kexec-use-unsigned-bitfield.patch
kexec: use unsigned bitfield
x86-machine_shutdown.patch
kexec: x86: factor out apic shutdown code
x86-kexec.patch
kexec: x86 kexec core
x86-crashkernel.patch
crashdump: x86 crashkernel option
x86-crashkernel-fix.patch
kexec: fix for broken kexec on panic
x86_64-machine_shutdown.patch
kexec: x86_64: factor out apic shutdown code
x86_64-kexec.patch
kexec: x86_64 kexec implementation
x86_64-crashkernel.patch
crashdump: x86_64: crashkernel option
kexec-ppc-support.patch
kexec: kexec ppc support
kexec-ppc-fix-noret_type.patch
kexec: ppc: fix NORET_TYPE
x86-crash_shutdown-nmi-shootdown.patch
crashdump: x86: add NMI handler to capture other CPUs
x86-crash_shutdown-snapshot-registers.patch
kexec: x86: snapshot registers during crash shutdown
x86-crash_shutdown-apic-shutdown.patch
kexec: x86 shutdown APICs during crash_shutdown
crashdump-documentation.patch
crashdump: documentation
crashdump-memory-preserving-reboot-using-kexec.patch
crashdump: memory preserving reboot using kexec
crashdump-routines-for-copying-dump-pages.patch
crashdump: routines for copying dump pages
crashdump-routines-for-copying-dump-pages-fixes.patch
crashdump-routines-for-copying-dump-pages-fixes
crashdump-elf-format-dump-file-access.patch
crashdump: elf format dump file access
crashdump-linear-raw-format-dump-file-access.patch
crashdump: linear raw format dump file access
crashdump-linear-raw-format-dump-file-access-coding-style.patch
crashdump-linear-raw-format-dump-file-access-coding-style
kdump-export-crash-notes-section-address-through.patch
Kdump: Export crash notes section address through sysfs
kdump-export-crash-notes-section-address-through-build-fix.patch
kdump-export-crash-notes-section-address-through build fix
kdump-export-crash-notes-section-address-through-x86_64-fix.patch
kdump-export-crash-notes-section-address-through x86_64 fix
new-bitmap-list-format-for-cpusets.patch
new bitmap list format (for cpusets)
cpusets-big-numa-cpu-and-memory-placement.patch
cpusets - big numa cpu and memory placement
cpusets-config_cpusets-depends-on-smp.patch
Cpusets: CONFIG_CPUSETS depends on SMP
cpusets-move-cpusets-above-embedded.patch
move CPUSETS above EMBEDDED
cpusets-fix-cpuset_get_dentry.patch
cpusets : fix cpuset_get_dentry()
cpusets-fix-race-in-cpuset_add_file.patch
cpusets: fix race in cpuset_add_file()
cpusets-remove-more-casts.patch
cpusets: remove more casts
cpusets-make-config_cpusets-the-default-in-sn2_defconfig.patch
cpusets: make CONFIG_CPUSETS the default in sn2_defconfig
cpusets-document-proc-status-allowed-fields.patch
cpusets: document proc status allowed fields
cpusets-dont-export-proc_cpuset_operations.patch
Cpusets - Dont export proc_cpuset_operations
cpusets-display-allowed-masks-in-proc-status.patch
cpusets: display allowed masks in proc status
cpusets-simplify-cpus_allowed-setting-in-attach.patch
cpusets: simplify cpus_allowed setting in attach
cpusets-remove-useless-validation-check.patch
cpusets: remove useless validation check
cpusets-tasks-file-simplify-format-fixes.patch
Cpusets tasks file: simplify format, fixes
lib-sort-replace-open-coded-opids2-bubblesort-in-cpusets.patch
lib/sort: Replace open-coded O(pids**2) bubblesort in cpusets
cpusets-simplify-memory-generation.patch
Cpusets: simplify memory generation
cpusets-interoperate-with-hotplug-online-maps.patch
cpusets: interoperate with hotplug online maps
cpusets-alternative-fix-for-possible-race-in.patch
cpusets: alternative fix for possible race in cpuset_tasks_read()
cpusets-remove-casts.patch
cpusets: remove void* typecasts
reiser4-sb_sync_inodes.patch
reiser4: vfs: add super_operations.sync_inodes()
reiser4-allow-drop_inode-implementation.patch
reiser4: export vfs inode.c symbols
reiser4-truncate_inode_pages_range.patch
reiser4: vfs: add truncate_inode_pages_range()
reiser4-export-remove_from_page_cache.patch
reiser4: export pagecache add/remove functions to modules
reiser4-export-page_cache_readahead.patch
reiser4: export page_cache_readahead to modules
reiser4-reget-page-mapping.patch
reiser4: vfs: re-check page->mapping after calling try_to_release_page()
reiser4-rcu-barrier.patch
reiser4: add rcu_barrier() synchronization point
reiser4-export-inode_lock.patch
reiser4: export inode_lock to modules
reiser4-export-pagevec-funcs.patch
reiser4: export pagevec functions to modules
reiser4-export-radix_tree_preload.patch
reiser4: export radix_tree_preload() to modules
reiser4-export-find_get_pages.patch
reiser4-radix_tree_lookup_slot.patch
reiser4: add radix_tree_lookup_slot()
reiser4-perthread-pages.patch
reiser4: per-thread page pools
reiser4-perthread_pages_alloc-cleanup.patch
perthread_pages_alloc cleanup
reiser4-include-reiser4.patch
reiser4: add to build system
reiser4-doc.patch
reiser4: documentation
reiser4-only.patch
reiser4: main fs
add-acpi-based-floppy-controller-enumeration.patch
Add ACPI-based floppy controller enumeration.
possible-dcache-bug-debugging-patch.patch
Possible dcache BUG: debugging patch
serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
serial: add support for non-standard XTALs to 16c950 driver
add-support-for-possio-gcc-aka-pcmcia-siemens-mc45.patch
Add support for Possio GCC AKA PCMCIA Siemens MC45
generic-serial-cli-conversion.patch
generic-serial cli() conversion
specialix-io8-cli-conversion.patch
Specialix/IO8 cli() conversion
sx-cli-conversion.patch
SX cli() conversion
au1x00_uart-deadlock-fix.patch
au1x00_uart deadlock fix
revert-allow-oem-written-modules-to-make-calls-to-ia64-oem-sal-functions.patch
revert "allow OEM written modules to make calls to ia64 OEM SAL functions"
md-add-interface-for-userspace-monitoring-of-events.patch
md: add interface for userspace monitoring of events.
remove-lock_section-from-x86_64-spin_lock-asm.patch
remove LOCK_SECTION from x86_64 spin_lock asm
kfree_skb-dump_stack.patch
kfree_skb-dump_stack
cancel_rearming_delayed_work.patch
cancel_rearming_delayed_work()
ipvs-deadlock-fix.patch
ipvs deadlock fix
minimal-ide-disk-updates.patch
Minimal ide-disk updates
use-find_trylock_page-in-free_swap_and_cache-instead-of-hand-coding.patch
use find_trylock_page in free_swap_and_cache instead of hand coding
radeonfb-fix-spurious-error-return-in-fbio_radeon_set_mirror.patch
radeonfb: Fix spurious error return in FBIO_RADEON_SET_MIRROR
w100fb-make-blanking-function-interrupt-safe.patch
w100fb: Make blanking function interrupt safe
kyrofb-copy__user-return-value-checks-added-to-kyro-fb.patch
kyrofb: copy_*_user return value checks added to kyro fb
skeletonfb-documentation-fixes.patch
skeletonfb: Documentation fixes
intelfb-add-partial-support-915g-chipset.patch
intelfb: Add partial support 915G chipset
intelfbdrv-resource-warning-fixes.patch
intelfbdrv resource warning fixes
sisfb_compat_ioctl-warning-fix.patch
fbdev compat_ioctl warning fix
sis-warning-fix.patch
sis warning fix
tridentfbc-make-some-code-static.patch
tridentfb.c: make some code static
tridentfb-warning-fix.patch
tridentfb warning fix
intelfb-vesa_modes-require-config_fb_modehelpers.patch
intelfb: vesa_modes require CONFIG_FB_MODEHELPERS
fbdev-make-fb_find_mode-return-failure-if-modular.patch
fbdev: Make fb_find_mode() return failure if modular
fbdev-logo-code-fixes.patch
fbdev: Logo code fixes
fbdev-kbuild-cleanups.patch
fbdev: Kbuild cleanups
geodefb-add-geode-framebuffer-driver.patch
geodefb: Add Geode framebuffer driver
nvidiafb-add-update-framebuffer-driver-for-nvidia-chipsets.patch
nvidiafb: Add update framebuffer driver for nVidia chipsets
fbdev-generic-drawing-function-cleanups.patch
fbdev: Generic drawing function cleanups
radeonfb-disable-agp-on-suspend.patch
radeonfb: Disable AGP on suspend
aty128fb-disable-agp-on-suspend.patch
aty128fb: Disable AGP on suspend
ppc32-uninorth-agp-suspend-support.patch
ppc32: uninorth-agp suspend support
md-fix-multipath-assembly-bug.patch
md: fix multipath assembly bug
md-raid-kconfig-cleanups-remove-experimental-tag-from-raid-6.patch
md: RAID Kconfig cleanups, remove experimental tag from RAID-6
md-remove-possible-oops-in-md-raid1.patch
md: remove possible oops in md/raid1
md-make-raid5-and-raid6-robust-against-failure-during-recovery.patch
md: make raid5 and raid6 robust against failure during recovery.
md-remove-kludgy-level-check-from-mdc.patch
md: remove kludgy level check from md.c
md-merge-md_enter_safemode-into-md_check_recovery.patch
md: merge md_enter_safemode into md_check_recovery
md-improve-locking-on-safemode-and-move-superblock-writes.patch
md: improve locking on 'safemode' and move superblock writes
md-improve-the-interface-to-sync_request.patch
md: improve the interface to sync_request
md-optimised-resync-using-bitmap-based-intent-logging.patch
md: optimised resync using Bitmap based intent logging
md-optimised-resync-using-bitmap-based-intent-logging-fix.patch
md-optimised-resync-using-bitmap-based-intent-logging fix
md-raid1-support-for-bitmap-intent-logging.patch
md: raid1 support for bitmap intent logging
md-optimise-reconstruction-when-re-adding-a-recently-failed-drive.patch
md: optimise reconstruction when re-adding a recently failed drive.
md-printk-fix.patch
md printk fix
device-mapper-store-name-directly-against-device.patch
device-mapper: Store name directly against device
device-mapper-record-restore-bio-state.patch
device-mapper: Record & restore bio state.
device-mapper-export-map_info.patch
device-mapper: Export map_info
device-mapper-multipath.patch
device-mapper: multipath
device-mapper-multipath-round-robin-path-selector.patch
device-mapper: multipath round-robin path selector.
device-mapper-multipath-hardware-handler.patch
device-mapper: multipath hardware handler
device-mapper-multipath-hardware-handler-fix.patch
device-mapper-multipath-hardware-handler fix
device-mapper-multipath-hardware-handler-for-emc.patch
device-mapper: multipath hardware handler for EMC
device-mapper-tag-multipath-exports-gpl.patch
device-mapper: tag multipath exports GPL
device-mapper-some-code-formatting-cleanups.patch
device-mapper: Some code/formatting cleanups
device-mapper-some-multipath-fn-renames.patch
device-mapper: Some multipath fn renames
figure-out-who-is-inserting-bogus-modules.patch
Figure out who is inserting bogus modules
detect-atomic-counter-underflows.patch
detect atomic counter underflows
update-documentation-filesystems-locking.patch
Update Documentation/filesystems/Locking
post-halloween-doc.patch
post halloween doc
fuse-maintainers-kconfig-and-makefile-changes.patch
Subject: [PATCH 1/11] FUSE - MAINTAINERS, Kconfig and Makefile changes
fuse-core.patch
Subject: [PATCH 2/11] FUSE - core
fuse-device-functions.patch
Subject: [PATCH 3/11] FUSE - device functions
fuse: fix race in interrupted request
fuse-read-only-operations.patch
Subject: [PATCH 4/11] FUSE - read-only operations
fuse-read-write-operations.patch
Subject: [PATCH 5/11] FUSE - read-write operations
fuse-file-operations.patch
Subject: [PATCH 6/11] FUSE - file operations
fuse-mount-options.patch
Subject: [PATCH 7/11] FUSE - mount options
fuse-extended-attribute-operations.patch
Subject: [PATCH 8/11] FUSE - extended attribute operations
fuse-readpages-operation.patch
Subject: [PATCH 9/11] FUSE - readpages operation
fuse-nfs-export.patch
Subject: [PATCH 10/11] FUSE - NFS export
fuse-direct-i-o.patch
Subject: [PATCH 11/11] FUSE - direct I/O
fuse-transfer-readdir-data-through-device.patch
fuse: transfer readdir data through device
cryptoapi-prepare-for-processing-multiple-buffers-at.patch
CryptoAPI: prepare for processing multiple buffers at a time
cryptoapi-update-padlock-to-process-multiple-blocks-at.patch
CryptoAPI: Update PadLock to process multiple blocks at once
make-various-things-static.patch
Make lots of things static
fs-proc-kcorec-make-a-function-static.patch
fs/proc/kcore.c: make a function static
fs-qnx4-make-some-code-static.patch
fs/qnx4/: make some code static
drivers-char-isicomc-make-a-struct-static.patch
drivers/char/isicom.c: make a struct static
drivers-char-watchdog-make-some-code-static.patch
drivers/char/watchdog/: make some code static
drivers-char-synclinkmpc-make-3-functions-static.patch
drivers/char/synclinkmp.c: make 3 functions static
drivers-scsi-chc-make-a-struct-static.patch
drivers/scsi/ch.c: make a struct static
update-email-address-of-andrea-arcangeli.patch
update email address of Andrea Arcangeli
compile-error-blackbird_load_firmware.patch
blackbird_load_firmware compile fix
i386-cpu-commonc-some-cleanups.patch
i386 cpu/common.c: some cleanups
i386-x86_64-io_apicc-misc-cleanups.patch
i386/x86_64 io_apic.c: misc cleanups
3w-abcdh-tw_device_extension-remove-an-unused-filed.patch
3w-abcd.h: TW_Device_Extension: remove an unused field
kill-aux_device_present.patch
kill aux_device_present
mostly-i386-mm-cleanup.patch
(mostly i386) mm cleanup
update-email-address-of-benjamin-lahaise.patch
Update email address of Benjamin LaHaise
update-email-address-of-philip-blundell.patch
Update email address of Philip Blundell
saa7146_vv_ksymsc-remove-two-unused-export_symbol_gpls.patch
saa7146_vv_ksyms.c: remove two unused EXPORT_SYMBOL_GPL's
fix-placement-of-static-inline-in-nfsdh.patch
fix placement of static inline in nfsd.h
mm-page-writebackc-remove-an-unused-function.patch
mm/page-writeback.c: remove an unused function
misc-isapnp-cleanups.patch
misc ISAPNP cleanups
some-pnp-cleanups.patch
some PNP cleanups
if-0-cx88_risc_disasm.patch
#if 0 cx88_risc_disasm
make-loglevels-in-init-mainc-a-little-more-sane.patch
Make loglevels in init/main.c a little more sane.
isicom-use-null-for-pointer.patch
sparse: use NULL for pointer
remove-bouncing-email-address-of-hennus-bergman.patch
remove bouncing email address of Hennus Bergman
i386-apic-kconfig-cleanups.patch
i386 APIC Kconfig cleanups
remove-bouncing-email-address-of-thomas-hood.patch
remove bouncing email address of Thomas Hood
fs-adfs-dir_fc-remove-an-unused-function.patch
fs/adfs/dir_f.c: remove an unused function
drivers-char-moxac-if-0-an-unused-function.patch
drivers/char/moxa.c: #if 0 an unused function
oss-sb_cardc-no-need-to-include-mcah.patch
OSS sb_card.c: no need to include mca.h
ioschedc-use-proper-documentation-path.patch
*-iosched.c: Use proper documentation path
small-drivers-video-kyro-cleanups.patch
small drivers/video/kyro/ cleanups
drivers-block-cpqarrayc-small-cleanups.patch
drivers/block/cpqarray.c: small cleanups
pcxx-remove-obsolete-driver.patch
pcxx: Remove obsolete driver
warning-fix-in-drivers-cdrom-mcdc.patch
warning fix in drivers/cdrom/mcd.c
wavefront-reduce-stack-usage.patch
wavefront: reduce stack usage
mm-page-writebackc-remove-an-unused-function-2.patch
mm/page-writeback.c: remove an unused function #2
generic_serialh-kill-incorrect-gs_debug-reference.patch
generic_serial.h: kill incorrect gs_debug reference
remove-the-unused-oss-maestro_tablesh.patch
remove the unused OSS maestro_tables.h
fs-hfs-misc-cleanups.patch
fs/hfs/: misc cleanups
fs-hfsplus-misc-cleanups.patch
fs/hfsplus/: misc cleanups
i386-math-emu-misc-cleanups.patch
i386/math-emu/: misc cleanups
non-pc-parport-config-change.patch
non-PC parport config change
prism54-misc-cleanups.patch
prism54: misc cleanups
scsi-qlogicfcc-some-cleanups.patch
SCSI qlogicfc.c: some cleanups
scsi-qlogicispc-some-cleanups.patch
SCSI qlogicisp.c: some cleanups
hpet-setup-comment-fix.patch
hpet setup comment fix
kill-iphase5526.patch
kill IPHASE5526
i386-x86_64-acpi-sleepc-kill-unused-acpi_save_state_disk.patch
i386/x86_64: acpi/sleep.c: kill unused acpi_save_state_disk
smpbootc-cleanups.patch
smp{,boot}.c cleanups
i386-kernel-i387c-misc-cleanups.patch
i386/kernel/i387.c: misc cleanups
mxserc-remove-unused-variable.patch
mxser.c: remove unused variable
update-panic-comment.patch
Update panic() comment
pm3fb-remove-kernel-22-code.patch
pm3fb: remove kernel 2.2 code
drivers-block-paride-cleanups.patch
drivers/block/paride/ cleanups (fwd)
remove-obsolete-linux-resourceh-inclusion-from-asm-generic-siginfoh.patch
remove obsolete linux/resource.h inclusion from asm-generic/siginfo.h
fix-pm_message_t-in-generic-code.patch
Fix pm_message_t in generic code
fix-u32-vs-pm_message_t-in-usb.patch
Fix u32 vs. pm_message_t in USB
fix-u32-vs-pm_message_t-confusion-in-oss.patch
Fix u32 vs. pm_message_t confusion in OSS
fix-u32-vs-pm_message_t-confusion-in-pcmcia.patch
Fix u32 vs. pm_message_t confusion in PCMCIA
fix-u32-vs-pm_message_t-confusion-in-framebuffers.patch
Fix u32 vs. pm_message_t confusion in framebuffers
fix-u32-vs-pm_message_t-confusion-in-mmc.patch
Fix u32 vs. pm_message_t confusion in MMC
fix-u32-vs-pm_message_t-confusion-in-serials.patch
Fix u32 vs. pm_message_t confusion in serials
fix-u32-vs-pm_message_t-in-macintosh.patch
Fix u32 vs. pm_message_t in macintosh
fix-u32-vs-pm_message_t-confusion-in-agp.patch
Fix u32 vs. pm_message_t confusion in AGP
fs-jffs-misc-cleanups.patch
fs/jffs/: misc cleanups
fs-jffs2-misc-cleanups.patch
fs/jffs2/: misc cleanups
drivers-block-cciss-misc-cleanups.patch
drivers/block/cciss*: misc cleanups
remove-unused-get_resource_list-declaration.patch
Remove unused get_resource_list() declaration
typo-in-include-linux-compilerh.patch
typo in include/linux/compiler.h
mark-blk_dev_ps2-as-broken.patch
mark BLK_DEV_PS2 as BROKEN
vsprintfc-cleanups.patch
vsprintf.c cleanups
i386-scx200c-misc-cleanups.patch
i386 scx200.c: misc cleanups
unexport-mmu_cr4_features.patch
unexport mmu_cr4_features
drivers-char-mxserc-cleanups.patch
drivers/char/mxser.c cleanups
drivers-char-mwave-smapic-small-cleanups.patch
drivers/char/mwave/smapi.c: small cleanups
drivers-char-specialixc-misc-cleanups.patch
drivers/char/specialix.c: misc cleanups
drivers-char-sysrqc-remove-the-unused-sysrq_power_off.patch
drivers/char/sysrq.c: remove the unused sysrq_power_off
small-partitions-msdos-cleanups.patch
small partitions/msdos cleanups
drivers-char-vt-cleanups.patch
drivers/char/vt*: cleanups
removes-unused-label-from-drivers-isdn-hisax-hisax_fcpcipnpc.patch
Removes unused label from /drivers/isdn/hisax/hisax_fcpcipnp.c
On Tue, 01 Mar 2005 01:27:41 PST, Andrew Morton said:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc5/2.6.11-rc5-mm1/
> - A pcmcia update which obsoletes cardmgr (although cardmgr still works) and
> makes pcmcia work more like regular hotpluggable devices. See the
> changelong in pcmcia-dont-send-eject-request-events-to-userspace.patch for
> details.
This is still showing the same 'cs: unable to map card memory!' issue on my
Dell laptop. Backing out bk-pci.patch makes it work again.
For what it's worth, the hotplug system wasn't able to initialize the wireless
card (TrueMobile 1150) at boot - still needed cardmgr to get it started up.
But that might just me being an idiot...
Andrew Morton <[email protected]> disait dernièrement que :
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc5/2.6.11-rc5-mm1/
>
>
> - Lots of tuning/balancing changes in the CPU scheduler. Mainly targetted
> at larger SMT/SMP/NUMA machines. It's going to be hard to work out whether
> these are a net benefit.
>
> - A pcmcia update which obsoletes cardmgr (although cardmgr still works) and
> makes pcmcia work more like regular hotpluggable devices. See the
> changelong in pcmcia-dont-send-eject-request-events-to-userspace.patch for
> details.
>
> - A new reiser4 code drop.
By the way, I got an strange warning compiling fs/reiser4/plugin/ctail.c
obvious fix is attached
fs/reiser4/plugin/item/ctail.c: In function `check_ctail':
fs/reiser4/plugin/item/ctail.c:250: attention : l'adresse de « ctail_ok » sera toujours évaluée comme étant « true »
fs/reiser4/plugin/item/ctail.c: In function `convert_ctail':
fs/reiser4/plugin/item/ctail.c:1669: attention : l'adresse de « coord_is_unprepped_ctail » sera toujours évaluée comme étant « true »
Signed-off-by: Mathieu Segaud <[email protected]>
On Tue, Mar 01, 2005 at 08:36:36AM -0500, [email protected] wrote:
> On Tue, 01 Mar 2005 01:27:41 PST, Andrew Morton said:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc5/2.6.11-rc5-mm1/
>
> > - A pcmcia update which obsoletes cardmgr (although cardmgr still works) and
> > makes pcmcia work more like regular hotpluggable devices. See the
> > changelong in pcmcia-dont-send-eject-request-events-to-userspace.patch for
> > details.
>
> This is still showing the same 'cs: unable to map card memory!' issue on my
> Dell laptop. Backing out bk-pci.patch makes it work again.
>
> For what it's worth, the hotplug system wasn't able to initialize the wireless
> card (TrueMobile 1150) at boot - still needed cardmgr to get it started up.
> But that might just me being an idiot...
It's probably a clash between the PCI updates and the PCMCIA updates.
The PCI updates change the prototype of a helper function for
pci_bus_alloc_resource(), but don't touch the actual helper function
in PCMCIA.
This means that the PCI update is actually broken - if it's merged as
is into Linus' tree, PCMCIA will break there as well.
Can whoever did the PCI update please resolve this mismatch. Moreover,
if 2.6.11 appears, please do not merge the PCI updates until this has
been resolved. Thanks.
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
Mathieu Segaud <[email protected]> disait dernièrement que :
Hum, one hunk didn't make it.
The complete patch is attached
>
> fs/reiser4/plugin/item/ctail.c: In function `check_ctail':
> fs/reiser4/plugin/item/ctail.c:250: attention : l'adresse de « ctail_ok » sera toujours évaluée comme étant « true »
> fs/reiser4/plugin/item/ctail.c: In function `convert_ctail':
> fs/reiser4/plugin/item/ctail.c:1669: attention : l'adresse de « coord_is_unprepped_ctail » sera toujours évaluée comme étant « true »
>
Signed-off-by: Mathieu Segaud <[email protected]>
Mathieu Segaud <[email protected]> disait dernièrement que :
> Mathieu Segaud <[email protected]> disait dernièrement que :
>
> Hum, one hunk didn't make it.
> The complete patch is attached
as any time I post with no sleep for 3 days, more noodles than brain
are in my skull. Did tha wrong strip level, didn't I ?
well, this the last one, with every hunk, and correct strip level
Mathieu Segaud wrote:
>Mathieu Segaud <[email protected]> disait dernièrement que :
>
>Hum, one hunk didn't make it.
>The complete patch is attached
>
>
>
>>fs/reiser4/plugin/item/ctail.c: In function `check_ctail':
>>fs/reiser4/plugin/item/ctail.c:250: attention : l'adresse de « ctail_ok » sera toujours évaluée comme étant « true »
>>fs/reiser4/plugin/item/ctail.c: In function `convert_ctail':
>>fs/reiser4/plugin/item/ctail.c:1669: attention : l'adresse de « coord_is_unprepped_ctail » sera toujours évaluée comme étant « true »
>>
>>
>>
>
>Signed-off-by: Mathieu Segaud <[email protected]>
>
>
>
>
>
Thanks for catching this.
Edward.
>------------------------------------------------------------------------
>
>--- fs/reiser4/plugin/item/ctail.c 2005-03-01 14:57:52.756014040 +0100
>+++ fs/reiser4/plugin/item/ctail.c.new 2005-03-01 14:57:19.791025480 +0100
>@@ -247,7 +247,7 @@
> reiser4_internal int
> check_ctail (const coord_t * coord, const char **error)
> {
>- if (!ctail_ok) {
>+ if (!ctail_ok(coord)) {
> if (error)
> *error = "bad cluster shift in ctail";
> return 1;
>@@ -1666,7 +1666,7 @@
> detach_convert_idata(pos->sq);
> break;
> case CRC_OVERWRITE_ITEM:
>- if (coord_is_unprepped_ctail) {
>+ if (coord_is_unprepped_ctail(&pos->coord)) {
> /* convert unpprepped ctail to prepped one */
> int shift;
> shift = inode_cluster_shift(item_convert_data(pos)->inode);
>
>
>
>
>
>
On Tue, 01 Mar 2005 13:55:29 GMT, Russell King said:
> On Tue, Mar 01, 2005 at 08:36:36AM -0500, [email protected] wrote:
> > This is still showing the same 'cs: unable to map card memory!' issue on my
> > Dell laptop. Backing out bk-pci.patch makes it work again.
> >
> > For what it's worth, the hotplug system wasn't able to initialize the wireless
> > card (TrueMobile 1150) at boot - still needed cardmgr to get it started up.
> > But that might just me being an idiot...
>
> It's probably a clash between the PCI updates and the PCMCIA updates.
>
> The PCI updates change the prototype of a helper function for
> pci_bus_alloc_resource(), but don't touch the actual helper function
> in PCMCIA.
That explains the warning messages that gcc was tossing, which I suspected was
involved...
> This means that the PCI update is actually broken - if it's merged as
> is into Linus' tree, PCMCIA will break there as well.
Is the patch made to PCI actually incorrect, or is the proper way to do this
to propagate the changes into the relevant PCMCIA code?
On Tue, Mar 01, 2005 at 10:18:56AM -0500, [email protected] wrote:
> On Tue, 01 Mar 2005 13:55:29 GMT, Russell King said:
> > The PCI updates change the prototype of a helper function for
> > pci_bus_alloc_resource(), but don't touch the actual helper function
> > in PCMCIA.
>
> That explains the warning messages that gcc was tossing, which I suspected was
> involved...
>
> > This means that the PCI update is actually broken - if it's merged as
> > is into Linus' tree, PCMCIA will break there as well.
>
> Is the patch made to PCI actually incorrect, or is the proper way to do this
> to propagate the changes into the relevant PCMCIA code?
PCI has been updated to accept 64-bit resources, but the PCMCIA code
has been missed. So the correct fix is to propagate the changes where
necessary into the PCMCIA code.
The minimalist solution is to fix up the PCMCIA alignment functions.
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
Linux 2.6 (mm tree) Compile Statistics (gcc 3.4.1)
Web page with links to complete details:
http://developer.osdl.org/cherry/compile/
Kernel bzImage bzImage bzImage modules bzImage modules
(defconfig) (allno) (allyes) (allyes) (allmod) (allmod)
--------------- ---------- -------- -------- -------- -------- --------
2.6.11-rc5-mm1 21w/0e 0w/0e 262w/0e 10w/0e 26w/0e 238w/0e
2.6.11-rc4-mm1 22w/0e 0w/0e 271w/0e 10w/0e 25w/0e 249w/0e
2.6.11-rc3-mm2 14w/0e 0w/0e 192w/0e 6w/0e 19w/0e 172w/0e
2.6.11-rc3-mm1 13w/10e 0w/7e 196w/12e 6w/0e 18w/12e 177w/0e
2.6.11-rc2-mm2 15w/0e 0w/0e 201w/0e 6w/0e 18w/0e 182w/0e
2.6.11-rc2-mm1 15w/0e 0w/0e 306w/14e 6w/0e 18w/0e 294w/0e
2.6.11-rc1-mm2 21w/0e 0w/0e 316w/9e 6w/0e 22w/0e 294w/0e
2.6.11-rc1-mm1 21w/0e 0w/0e 319w/0e 6w/0e 23w/0e 298w/0e
2.6.10-mm3 21w/0e 0w/0e 320w/0e 6w/0e 23w/0e 299w/0e
2.6.10-mm2 21w/0e 0w/0e 440w/0e 6w/0e 23w/0e 420w/0e
2.6.10-mm1 12w/0e 0w/0e 414w/0e 6w/0e 17w/0e 399w/0e
2.6.10-rc3-mm1 12w/0e 0w/0e 414w/0e 6w/0e 16w/0e 401w/0e
2.6.10-rc2-mm4 15w/0e 1w/7e 421w/0e 6w/0e 16w/0e 408w/0e
2.6.10-rc2-mm3 15w/0e 0w/0e 1255w/12e 66w/0e 16w/0e 1507w/0e
2.6.10-rc2-mm2 15w/0e 0w/0e 1362w/15e 65w/0e 16w/0e 1612w/2e
2.6.10-rc2-mm1 15w/0e 0w/0e 1405w/11e 65w/0e 16w/0e 1652w/0e
2.6.10-rc1-mm5 16w/0e 0w/0e 1587w/0e 65w/0e 20w/0e 1834w/0e
2.6.10-rc1-mm4 16w/0e 0w/0e 1485w/9e 65w/0e 20w/0e 1732w/0e
(Compiles with gcc 3.2.2)
2.6.10-rc1-mm3 7w/31e 0w/9e 496w/141e 4w/0e 4w/50e 693w/83e
2.6.10-rc1-mm2 16w/1e 1w/1e 529w/1e 4w/0e 12w/1e 729w/0e
2.6.10-mm1 12w/0e 0w/0e 414w/0e 6w/0e 17w/0e 399w/0e
2.6.10-rc3-mm1 12w/0e 0w/0e 414w/0e 6w/0e 16w/0e 401w/0e
2.6.10-rc2-mm4 15w/0e 1w/7e 421w/0e 6w/0e 16w/0e 408w/0e
2.6.10-rc2-mm3 15w/0e 0w/0e 1255w/12e 66w/0e 16w/0e 1507w/0e
2.6.10-rc2-mm2 15w/0e 0w/0e 1362w/15e 65w/0e 16w/0e 1612w/2e
2.6.10-rc2-mm1 15w/0e 0w/0e 1405w/11e 65w/0e 16w/0e 1652w/0e
2.6.10-rc1-mm5 16w/0e 0w/0e 1587w/0e 65w/0e 20w/0e 1834w/0e
2.6.10-rc1-mm4 16w/0e 0w/0e 1485w/9e 65w/0e 20w/0e 1732w/0e
(Compiles with gcc 3.2.2)
2.6.10-rc1-mm3 7w/31e 0w/9e 496w/141e 4w/0e 4w/50e 693w/83e
2.6.10-rc1-mm2 16w/1e 1w/1e 529w/1e 4w/0e 12w/1e 729w/0e
2.6.10-rc1-mm1 16w/1e 1w/1e 592w/1e 4w/0e 13w/1e 857w/0e
2.6.9-mm1 6w/1e 1w/1e 1761w/15e 65w/0e 9w/0e 2086w/0e
2.6.9-rc4-mm1 5w/0e 0w/0e 1766w/11e 43w/0e 6w/0e 1798w/0e
2.6.9-rc3-mm3 5w/0e 0w/0e 1756w/11e 43w/0e 4w/0e 1786w/0e
2.6.9-rc3-mm2 10w/0e 4w/9e 1754w/14e 43w/0e 4w/0e 1782w/1e
2.6.9-rc3-mm1 10w/0e 4w/10e 1768w/0e 43w/0e 4w/0e 1796w/0e
2.6.9-rc2-mm4 10w/0e 5w/0e 2573w/0e 41w/0e 4w/0e 2600w/0e
2.6.9-rc2-mm3 10w/0e 5w/0e 2400w/0e 41w/0e 4w/0e 2435w/0e
2.6.9-rc2-mm2 10w/0e 5w/0e 2919w/0e 41w/0e 4w/0e 2954w/0e
2.6.9-rc2-mm1 0w/0e 2w/0e 3541w/9e 41w/0e 3w/9e 3567w/0e
2.6.9-rc1-mm4 0w/0e 1w/0e 55w/0e 3w/0e 2w/0e 48w/0e
2.6.9-rc1-mm3 0w/0e 0w/0e 55w/13e 3w/0e 1w/0e 49w/1e
2.6.9-rc1-mm2 0w/0e 0w/0e 53w/11e 3w/0e 1w/0e 47w/0e
2.6.9-rc1-mm1 0w/0e 0w/0e 80w/0e 4w/0e 1w/0e 74w/0e
2.6.8.1-mm4 0w/0e 0w/0e 78w/0e 4w/0e 1w/0e 73w/0e
2.6.8.1-mm3 0w/96e 0w/0e 78w/97e 4w/0e 1w/0e 74w/89e
2.6.8.1-mm2 0w/96e 0w/0e 78w/97e 4w/0e 1w/0e 74w/89e
2.6.8.1-mm1 0w/0e 0w/0e 78w/0e 4w/0e 1w/0e 74w/0e
2.6.8-rc4-mm1 0w/0e 0w/5e 81w/0e 4w/0e 1w/0e 75w/0e
2.6.8-rc3-mm2 1w/7e 0w/5e 82w/8e 4w/0e 2w/8e 75w/0e
2.6.8-rc3-mm1 0w/0e 1w/5e 81w/9e 4w/0e 1w/0e 75w/0e
2.6.8-rc2-mm2 0w/0e 4w/5e 87w/9e 4w/0e 1w/0e 80w/0e
2.6.8-rc2-mm1 0w/0e 0w/0e 83w/9e 3w/0e 1w/0e 81w/0e
2.6.8-rc1-mm1 0w/0e 0w/0e 88w/9e 5w/0e 1w/0e 87w/0e
2.6.7-mm7 0w/0e 0w/0e 89w/9e 5w/0e 1w/0e 84w/0e
2.6.7-mm6 0w/0e 0w/0e 85w/9e 5w/0e 1w/0e 80w/0e
2.6.7-mm5 0w/0e 0w/0e 92w/0e 5w/0e 1w/0e 87w/0e
2.6.7-mm4 0w/0e 0w/0e 94w/0e 5w/0e 1w/0e 89w/0e
2.6.7-mm3 0w/0e 0w/0e 90w/6e 5w/0e 1w/0e 86w/0e
2.6.7-mm2 0w/0e 0w/0e 109w/0e 7w/0e 1w/0e 106w/0e
2.6.7-mm1 0w/0e 5w/0e 108w/0e 5w/0e 1w/0e 104w/0e
2.6.7-rc3-mm2 0w/0e 5w/0e 105w/10e 5w/0e 2w/0e 100w/2e
2.6.7-rc3-mm1 0w/0e 5w/0e 104w/10e 5w/0e 2w/0e 100w/2e
2.6.7-rc2-mm2 0w/0e 5w/0e 109w/10e 5w/0e 2w/0e 105w/2e
2.6.7-rc2-mm1 0w/0e 12w/0e 158w/13e 5w/0e 3w/0e 153w/4e
2.6.7-rc1-mm1 0w/0e 6w/0e 108w/0e 5w/0e 2w/0e 104w/0e
2.6.6-mm5 0w/0e 0w/0e 109w/5e 5w/0e 2w/0e 110w/0e
2.6.6-mm4 0w/0e 0w/0e 112w/9e 5w/0e 2w/5e 106w/1e
2.6.6-mm3 3w/9e 0w/0e 120w/26e 5w/0e 2w/0e 114w/10e
2.6.6-mm2 4w/11e 0w/0e 120w/24e 6w/0e 2w/0e 118w/9e
2.6.6-mm1 1w/0e 0w/0e 118w/25e 6w/0e 2w/0e 114w/10e
2.6.6-rc3-mm2 0w/0e 0w/0e 117w/ 0e 8w/0e 2w/0e 116w/0e
2.6.6-rc3-mm1 0w/0e 0w/0e 120w/10e 8w/0e 2w/0e 152w/2e
2.6.6-rc2-mm2 0w/0e 1w/5e 118w/ 0e 8w/0e 3w/0e 118w/0e
2.6.6-rc2-mm1 0w/0e 0w/0e 115w/ 0e 7w/0e 3w/0e 116w/0e
2.6.6-rc1-mm1 0w/0e 0w/7e 122w/ 0e 7w/0e 4w/0e 122w/0e
2.6.5-mm6 0w/0e 0w/0e 123w/ 0e 7w/0e 4w/0e 124w/0e
2.6.5-mm5 0w/0e 0w/0e 119w/ 0e 7w/0e 4w/0e 120w/0e
2.6.5-mm4 0w/0e 0w/0e 120w/ 0e 7w/0e 4w/0e 121w/0e
2.6.5-mm3 0w/0e 1w/0e 121w/12e 7w/0e 3w/0e 123w/0e
2.6.5-mm2 0w/0e 0w/0e 128w/12e 7w/0e 3w/0e 134w/0e
2.6.5-mm1 0w/0e 5w/0e 122w/ 0e 7w/0e 3w/0e 124w/0e
2.6.5-rc3-mm4 0w/0e 0w/0e 124w/ 0e 8w/0e 4w/0e 126w/0e
2.6.5-rc3-mm3 0w/0e 5w/0e 129w/14e 8w/0e 4w/0e 129w/6e
2.6.5-rc3-mm2 0w/0e 5w/0e 130w/14e 8w/0e 4w/0e 129w/6e
2.6.5-rc3-mm1 0w/0e 5w/0e 129w/ 0e 8w/0e 4w/0e 129w/0e
2.6.5-rc2-mm5 0w/0e 5w/0e 130w/ 0e 8w/0e 4w/0e 129w/0e
2.6.5-rc2-mm4 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e
2.6.5-rc2-mm3 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e
2.6.5-rc2-mm2 0w/0e 5w/0e 137w/ 0e 8w/0e 3w/0e 134w/0e
2.6.5-rc2-mm1 0w/0e 5w/0e 136w/ 0e 8w/0e 3w/0e 134w/0e
2.6.5-rc1-mm2 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e
2.6.5-rc1-mm1 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e
2.6.4-mm2 1w/2e 5w/2e 144w/10e 8w/0e 3w/2e 144w/0e
2.6.4-mm1 1w/0e 5w/0e 146w/ 5e 8w/0e 3w/0e 144w/0e
2.6.4-rc2-mm1 1w/0e 5w/0e 146w/12e 11w/0e 3w/0e 147w/2e
2.6.4-rc1-mm2 1w/0e 5w/0e 144w/ 0e 11w/0e 3w/0e 145w/0e
2.6.4-rc1-mm1 1w/0e 5w/0e 147w/ 5e 11w/0e 3w/0e 147w/0e
2.6.3-mm4 1w/0e 5w/0e 146w/ 0e 7w/0e 3w/0e 142w/0e
2.6.3-mm3 1w/2e 5w/2e 146w/15e 7w/0e 3w/2e 144w/5e
2.6.3-mm2 1w/8e 5w/0e 140w/ 0e 7w/0e 3w/0e 138w/0e
2.6.3-mm1 1w/0e 5w/0e 143w/ 5e 7w/0e 3w/0e 141w/0e
2.6.3-rc3-mm1 1w/0e 0w/0e 144w/13e 7w/0e 3w/0e 142w/3e
2.6.3-rc2-mm1 1w/0e 0w/265e 144w/ 5e 7w/0e 3w/0e 145w/0e
2.6.3-rc1-mm1 1w/0e 0w/265e 141w/ 5e 7w/0e 3w/0e 143w/0e
2.6.2-mm1 2w/0e 0w/264e 147w/ 5e 7w/0e 3w/0e 173w/0e
2.6.2-rc3-mm1 2w/0e 0w/265e 146w/ 5e 7w/0e 3w/0e 172w/0e
2.6.2-rc2-mm2 0w/0e 0w/264e 145w/ 5e 7w/0e 3w/0e 171w/0e
2.6.2-rc2-mm1 0w/0e 0w/264e 146w/ 5e 7w/0e 3w/0e 172w/0e
2.6.2-rc1-mm3 0w/0e 0w/265e 144w/ 8e 7w/0e 3w/0e 169w/0e
2.6.2-rc1-mm2 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e
2.6.2-rc1-mm1 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e
2.6.1-mm5 2w/5e 0w/264e 153w/11e 10w/0e 3w/0e 180w/0e
2.6.1-mm4 0w/821e 0w/264e 154w/ 5e 8w/1e 5w/0e 179w/0e
2.6.1-mm3 0w/0e 0w/0e 151w/ 5e 10w/0e 3w/0e 177w/0e
2.6.1-mm2 0w/0e 0w/0e 143w/ 5e 12w/0e 3w/0e 171w/0e
2.6.1-mm1 0w/0e 0w/0e 146w/ 9e 12w/0e 6w/0e 171w/0e
2.6.1-rc2-mm1 0w/0e 0w/0e 149w/ 0e 12w/0e 6w/0e 171w/4e
2.6.1-rc1-mm2 0w/0e 0w/0e 157w/15e 12w/0e 3w/0e 185w/4e
2.6.1-rc1-mm1 0w/0e 0w/0e 156w/10e 12w/0e 3w/0e 184w/2e
2.6.0-mm2 0w/0e 0w/0e 161w/ 0e 12w/0e 3w/0e 189w/0e
2.6.0-mm1 0w/0e 0w/0e 173w/ 0e 12w/0e 3w/0e 212w/0e
John
Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc5/2.6.11-rc5-mm1/
>
>
> - Lots of tuning/balancing changes in the CPU scheduler. Mainly targetted
> at larger SMT/SMP/NUMA machines. It's going to be hard to work out whether
> these are a net benefit.
>
> - A pcmcia update which obsoletes cardmgr (although cardmgr still works) and
> makes pcmcia work more like regular hotpluggable devices. See the
> changelong in pcmcia-dont-send-eject-request-events-to-userspace.patch for
> details.
>
> - A new reiser4 code drop.
>
> - A new rev of the NFS ACL code.
hi,
I have a strange bug with nfs,
this happens on the 2.6.11-rc5-mm1 and i have no problems with 2.6.11-rc5.
i have a cvsroot exported over nfs on a server running a fedora core
kernel (kernel-2.6.5-1.358) and i use it from a notebook. With linus
kernel no problem, but with mm i have the following error :
cvs diff Makefile
cvs diff: cannot create read lock in repository
`/mnt/iseran/roca/cvsroot/ldpc': No such file or directory
cvs [diff aborted]: read lock failed - giving up
but the file is created and i can "cat " it without problem ...
strace gives me :
with 2.6.11-rc5-mm1:
open("/mnt/iseran/roca/cvsroot/ldpc/#cvs.rfl.vanua.6860",O_RDWR|O_CREAT|O_TRUNC,
0666) = -1 ENOENT (No such file or directory)
with 2.6.11-rc5 kernel:
open("/mnt/iseran/roca/cvsroot/ldpc/#cvs.rfl.vanua.14403",
O_RDWR|O_CREAT|O_TRUNC, 0666) = 3
close(3)
nfs is configured without acl in the .config
and AFAK the server neither uses them
<*> NFS file system support
[*] Provide NFSv3 client support
[ ] NFS_ACL protocol extension
[*] Provide NFSv4 client support (EXPERIMENTAL)
(actually i do not use nfs4 )
thanks,
Aur?lien
2.6.11-rc5-mm1 .config :
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-rc5-mm1
# Tue Mar 1 10:46:43 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODE is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
CONFIG_I8K=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hda7"
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_PCC is not set
# CONFIG_ACPI_SONY is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=y
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=y
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=y
CONFIG_IEEE1394_RAWIO=y
CONFIG_IEEE1394_CMP=y
CONFIG_IEEE1394_AMDTP=y
#
# I2O device support
#
CONFIG_I2O=y
CONFIG_I2O_CONFIG=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_TUNNEL=y
CONFIG_IP_TCPDIAG=y
CONFIG_IP_TCPDIAG_IPV6=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_RAW=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
CONFIG_ETHERTAP=y
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_ARLAN=m
CONFIG_WAVELAN=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_INPORT=y
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=y
CONFIG_MOUSE_PC110PAD=y
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_INOTIFY=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=y
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
CONFIG_STALDRV=y
# CONFIG_STALLION is not set
# CONFIG_ISTALLION is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_MULTIPORT=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
# CONFIG_IPMI_POWEROFF is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# SuperIO subsystem support
#
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be
needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_RW_DETECT=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=y
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=y
CONFIG_ROMFS_FS=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
#
# Caches
#
# CONFIG_FSCACHE is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_SECURITY=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_PRINTK_TIME is not set
CONFIG_SCHEDSTATS=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_KPROBES=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
2.6.11-rc5-bk1 .config
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-rc5-bk1
# Sat Feb 26 16:04:30 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
CONFIG_I8K=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_REGPARM=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hda7"
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_TABLE=y
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=y
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=y
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=y
CONFIG_IEEE1394_RAWIO=y
CONFIG_IEEE1394_CMP=y
CONFIG_IEEE1394_AMDTP=y
#
# I2O device support
#
CONFIG_I2O=y
CONFIG_I2O_CONFIG=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_TUNNEL=y
CONFIG_IP_TCPDIAG=y
CONFIG_IP_TCPDIAG_IPV6=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_RAW=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
CONFIG_ETHERTAP=y
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_ARLAN=m
CONFIG_WAVELAN=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_INPORT=y
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=y
CONFIG_MOUSE_PC110PAD=y
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=y
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_DIGI is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
CONFIG_STALDRV=y
# CONFIG_STALLION is not set
# CONFIG_ISTALLION is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_MULTIPORT=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
# CONFIG_IPMI_POWEROFF is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be
needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_RW_DETECT=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=y
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=y
CONFIG_ROMFS_FS=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_SECURITY=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_SCHEDSTATS=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_KPROBES=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
--
Lat: 45:11:43N (45.1954)
Lon: 5:43:36E ( 5.7268)
On Tue, Mar 01, 2005 at 01:27:41AM -0800, Andrew Morton wrote:
>...
> All 728 patches:
>...
> reiser4-rcu-barrier.patch
> reiser4: add rcu_barrier() synchronization point
Considering the patent situation at least in the USA, the
EXPORT_SYMBOL(rcu_barrier) has to become an EXPORT_SYMBOL_GPL.
> reiser4-export-inode_lock.patch
> reiser4: export inode_lock to modules
>...
__iget seems to be no longer used by reiser4.
This part of the patch can therefore be dropped.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Tue, Mar 01, 2005 at 01:55:29PM +0000, Russell King wrote:
> On Tue, Mar 01, 2005 at 08:36:36AM -0500, [email protected] wrote:
> > On Tue, 01 Mar 2005 01:27:41 PST, Andrew Morton said:
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc5/2.6.11-rc5-mm1/
> >
> > > - A pcmcia update which obsoletes cardmgr (although cardmgr still works) and
> > > makes pcmcia work more like regular hotpluggable devices. See the
> > > changelong in pcmcia-dont-send-eject-request-events-to-userspace.patch for
> > > details.
> >
> > This is still showing the same 'cs: unable to map card memory!' issue on my
> > Dell laptop. Backing out bk-pci.patch makes it work again.
> >
> > For what it's worth, the hotplug system wasn't able to initialize the wireless
> > card (TrueMobile 1150) at boot - still needed cardmgr to get it started up.
> > But that might just me being an idiot...
>
> It's probably a clash between the PCI updates and the PCMCIA updates.
>
> The PCI updates change the prototype of a helper function for
> pci_bus_alloc_resource(), but don't touch the actual helper function
> in PCMCIA.
>
> This means that the PCI update is actually broken - if it's merged as
> is into Linus' tree, PCMCIA will break there as well.
>
> Can whoever did the PCI update please resolve this mismatch. Moreover,
> if 2.6.11 appears, please do not merge the PCI updates until this has
> been resolved. Thanks.
Andrew had a stale bk-pci tree in his local copy, and that is where that
change came from. It will not show up in the next -mm release, and will
not be sent to Linus until after I have fixed up the _whole_ tree.
So sorry for the inconvience.
thakns,
greg k-h
Russell King <[email protected]> wrote:
>
> On Tue, Mar 01, 2005 at 10:18:56AM -0500, [email protected] wrote:
> > On Tue, 01 Mar 2005 13:55:29 GMT, Russell King said:
> > > The PCI updates change the prototype of a helper function for
> > > pci_bus_alloc_resource(), but don't touch the actual helper function
> > > in PCMCIA.
> >
> > That explains the warning messages that gcc was tossing, which I suspected was
> > involved...
> >
> > > This means that the PCI update is actually broken - if it's merged as
> > > is into Linus' tree, PCMCIA will break there as well.
> >
> > Is the patch made to PCI actually incorrect, or is the proper way to do this
> > to propagate the changes into the relevant PCMCIA code?
>
> PCI has been updated to accept 64-bit resources, but the PCMCIA code
> has been missed. So the correct fix is to propagate the changes where
> necessary into the PCMCIA code.
hmm, I missed that. That's the price of two screenfuls of fscking compile
warnings.
> The minimalist solution is to fix up the PCMCIA alignment functions.
Greg's dropping the 64-bit-resource patch for now.
* Andrew Morton ([email protected]) wrote:
> - I seem to be getting a lot of patches which don't compile if you breathe
> on the .config file, let alone if you try them on another architecture. It
> would be nice to receive less such patches, please.
The ia64 audit bit is likely my fault from the audit header detangle.
I did try w/ and w/out CONFIG_AUDITSYSCALL set, but only on one arch.
I also did a grep, but was only looking at audit_putname/getname, and
missed the others. I just did a more complete grep of the symbols that
can get config'd away (including CONFIG_AUDIT as well), and I think
there's a few more missing pieces. Sorry about that. Jeff, Ralf,
Martin, these look ok?
thanks,
-chris
--
A closer sweep of configurable audit symbols shows the following need
audit.h included when audit.h is detangled from fs.h as in -mm.
arch/um/kernel/ptrace.c for audit_syscall_entry/exit
arch/s390/kernel/ptrace.c for audit_syscall_entry/exit
arch/mips/kernel/ptrace.c for audit_syscall_entry/exit
Signed-off-by: Chris Wright <[email protected]>
===== arch/um/kernel/ptrace.c 1.21 vs edited =====
--- 1.21/arch/um/kernel/ptrace.c 2005-01-20 20:59:15 -08:00
+++ edited/arch/um/kernel/ptrace.c 2005-03-01 13:23:06 -08:00
@@ -9,6 +9,7 @@
#include "linux/smp_lock.h"
#include "linux/security.h"
#include "linux/ptrace.h"
+#include "linux/audit.h"
#ifdef CONFIG_PROC_MM
#include "linux/proc_mm.h"
#endif
===== arch/s390/kernel/ptrace.c 1.28 vs edited =====
--- 1.28/arch/s390/kernel/ptrace.c 2005-01-04 18:48:19 -08:00
+++ edited/arch/s390/kernel/ptrace.c 2005-03-01 13:22:45 -08:00
@@ -31,6 +31,7 @@
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/security.h>
+#include <linux/audit.h>
#include <asm/segment.h>
#include <asm/page.h>
===== arch/mips/kernel/ptrace.c 1.15 vs edited =====
--- 1.15/arch/mips/kernel/ptrace.c 2005-01-30 22:20:14 -08:00
+++ edited/arch/mips/kernel/ptrace.c 2005-03-01 13:24:48 -08:00
@@ -25,6 +25,7 @@
#include <linux/smp_lock.h>
#include <linux/user.h>
#include <linux/security.h>
+#include <linux/audit.h>
#include <asm/cpu.h>
#include <asm/fpu.h>
Adrian Bunk <[email protected]> wrote:
>
> On Tue, Mar 01, 2005 at 01:27:41AM -0800, Andrew Morton wrote:
> >...
> > All 728 patches:
> >...
> > reiser4-rcu-barrier.patch
> > reiser4: add rcu_barrier() synchronization point
>
> Considering the patent situation at least in the USA, the
> EXPORT_SYMBOL(rcu_barrier) has to become an EXPORT_SYMBOL_GPL.
I'll make that change.
> > reiser4-export-inode_lock.patch
> > reiser4: export inode_lock to modules
> >...
>
> __iget seems to be no longer used by reiser4.
> This part of the patch can therefore be dropped.
And that one.
Chris Wright <[email protected]> wrote:
>
> * Andrew Morton ([email protected]) wrote:
> > - I seem to be getting a lot of patches which don't compile if you breathe
> > on the .config file, let alone if you try them on another architecture. It
> > would be nice to receive less such patches, please.
>
> The ia64 audit bit is likely my fault from the audit header detangle.
I figured something like that, but the change is a good one anwyay. IOW:
your cleanup exposed a prior problem...
The current reiser4 help texts have two disadvantages:
1. they are more marketing speech than technical speech with
some debatable statements
2. they are too long
Examples for what I call "debatable statements":
ReiserFS V3 is the stablest Linux filesystem, and V4 is the fastest.
All people I know who talked about serious data loss due to a filesystem
damage were using reiser3.
That's not an objective measurement, but I have yet to see the proof
that reiserfs plus reiserfs fsck is able to beat ext2 plus ext2 fsck
in terms of stability.
In regards to claims by ext2 that they are the de facto
standard Linux filesystem, the most polite thing to say is that
many persons disagree, and it is interesting that those persons
seem to include the distros that are growing in market share.
See http://www.namesys.com/benchmarks.html for why many disagree.
ext2 was the de facto standard Linux filesystem at the time when this
was written into the ext2 help text. I just checked kernel 2.0 (released
more than eight and a half years ago) and this text was already there at
that time (and it was accurate at that time). It was simply a leftover.
Unfortunately, most people will no longer be able to understand this
"joke" in the reiser4 help text since my patch removing this from the
ext2 help text because it's no longer accurate was included in kernel
2.6.8 released more than half a year ago.
This patch shortens the help texts to include only the interesting
technical information and to bring the help text to a lenght that is
comparable to the help texts of other filesystems.
The pointer to http://www.namesys.com is still there, and people can
get all the other information formerly in the help text from there
of they are interested in more details.
Signed-off-by: Adrian Bunk <[email protected]>
---
fs/reiser4/Kconfig | 81 +++++----------------------------------------
1 files changed, 10 insertions(+), 71 deletions(-)
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/Kconfig.old 2005-03-01 23:49:13.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/Kconfig 2005-03-02 00:31:02.000000000 +0100
@@ -1,27 +1,11 @@
config REISER4_FS
- tristate "Reiser4 (EXPERIMENTAL very fast general purpose filesystem)"
+ tristate "Reiser4 (EXPERIMENTAL)"
depends on EXPERIMENTAL && !4KSTACKS
help
- Reiser4 is more than twice as fast for both reads and writes as
- ReiserFS V3, and is the fastest Linux filesystem, by a lot,
- for typical IO intensive workloads. [It is slow at fsync
- intensive workloads as it is not yet optimized for fsync
- (sponsors are welcome for that work), and it is instead
- optimized for atomicity, see below.] Benchmarks that define
- "a lot" are at http://www.namesys.com/benchmarks.html.
-
- It is the storage layer of what will become a general purpose naming
- system --- like what Microsoft wants WinFS to be except designed with a
- clean new semantic layer rather than being SQL based like WinFS.
- For details read http://www.namesys.com/whitepaper.html
-
- It performs all filesystem operations as atomic transactions, which
- means that it either performs a write, or it does not, and in the
- event of a crash it does not partially perform it or corrupt it.
- Many applications that currently use fsync don't need to if they use
- reiser4, and that means a lot for performance. An API for performing
- multiple file system operations as one high performance atomic write
- is almost finished.
+ Reiser4 is a filesystem that performs all filesystem operations
+ as atomic transactions, which means that it either performs a
+ write, or it does not, and in the event of a crash it does not
+ partially perform it or corrupt it.
It stores files in dancing trees, which are like balanced trees but
faster. It packs small files together so that they share blocks
@@ -30,45 +14,9 @@
hassling you with anachronisms like having a maximum number of
inodes, and wasting space if you use less than that number.
- It can handle really large directories, because its search
- algorithms are logarithmic with size not linear. With Reiser4 you
- should use subdirectories because they help YOU, not because they
- help your filesystem's performance, or because your filesystem won't
- be able to shrink a directory once you have let it grow. For squid
- and similar applications, everything in one directory should perform
- better.
-
- It has a plugin-based infrastructure, which means that you can easily
- invent new kinds of files, and so can other people, so it will evolve
- rapidly.
-
- We will be adding a variety of security features to it that DARPA has
- funded us to write.
-
- "reiser4" is a distinct filesystem mount type from "reiserfs" (V3),
- which means that "reiserfs" filesystems will be unaffected by any
- reiser4 bugs.
-
- ReiserFS V3 is the stablest Linux filesystem, and V4 is the fastest.
-
- In regards to claims by ext2 that they are the de facto
- standard Linux filesystem, the most polite thing to say is that
- many persons disagree, and it is interesting that those persons
- seem to include the distros that are growing in market share.
- See http://www.namesys.com/benchmarks.html for why many disagree.
-
- If you'd like to upgrade from reiserfs to reiser4, use tar to a
- temporary disk, maybe using NFS/ssh/SFS to get to that disk, or ask
- your favorite distro to sponsor writing a conversion program.
-
- Sponsored by the Defensed Advanced Research Projects Agency (DARPA)
- of the United States Government. DARPA does not endorse this
- project, it merely sponsors it.
- See http://www.darpa.mil/ato/programs/chats.htm
-
- If you would like to learn about our plans to add
- military grade security to reiser4, please read
- http://www.namesys.com/blackbox_security.html.
+ Reiser4 is a distinct filesystem type from reiserfs (V3).
+ It's therefore not possible to use reiserfs file systems
+ with reiser4.
To learn more about reiser4, go to http://www.namesys.com
@@ -76,15 +24,6 @@
bool "Enable reiser4 debug mode"
depends on REISER4_FS
help
- Don't use this unless you are a developer debugging reiser4. If
- using a kernel made by a distro that thinks they are our competitor
- (sigh) rather than made by Linus, always check each release to make
- sure they have not turned this on to make us look slow as was done
- once in the past. This checks everything imaginable while reiser4
- runs.
+ Don't use this unless you are debugging reiser4.
- When adding features to reiser4 you should set this, and then
- extensively test the code, and then send to us and we will test it
- again. Include a description of what you did to test it. All
- reiser4 code must be tested, reviewed, and signed off on by two
- persons before it will be accepted into a stable kernel by Hans.
+ If unsure, say N.
Aur?lien Francillon <[email protected]> wrote:
>
> Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc5/2.6.11-rc5-mm1/
> >
> >
> > - Lots of tuning/balancing changes in the CPU scheduler. Mainly targetted
> > at larger SMT/SMP/NUMA machines. It's going to be hard to work out whether
> > these are a net benefit.
> >
> > - A pcmcia update which obsoletes cardmgr (although cardmgr still works) and
> > makes pcmcia work more like regular hotpluggable devices. See the
> > changelong in pcmcia-dont-send-eject-request-events-to-userspace.patch for
> > details.
> >
> > - A new reiser4 code drop.
> >
> > - A new rev of the NFS ACL code.
>
> hi,
> I have a strange bug with nfs,
> this happens on the 2.6.11-rc5-mm1 and i have no problems with 2.6.11-rc5.
>
> i have a cvsroot exported over nfs on a server running a fedora core
> kernel (kernel-2.6.5-1.358) and i use it from a notebook. With linus
> kernel no problem, but with mm i have the following error :
>
> cvs diff Makefile
> cvs diff: cannot create read lock in repository
> `/mnt/iseran/roca/cvsroot/ldpc': No such file or directory
> cvs [diff aborted]: read lock failed - giving up
>
> but the file is created and i can "cat " it without problem ...
>
> strace gives me :
>
> with 2.6.11-rc5-mm1:
> open("/mnt/iseran/roca/cvsroot/ldpc/#cvs.rfl.vanua.6860",O_RDWR|O_CREAT|O_TRUNC,
> 0666) = -1 ENOENT (No such file or directory)
>
> with 2.6.11-rc5 kernel:
> open("/mnt/iseran/roca/cvsroot/ldpc/#cvs.rfl.vanua.14403",
> O_RDWR|O_CREAT|O_TRUNC, 0666) = 3
> close(3)
>
>
> nfs is configured without acl in the .config
> and AFAK the server neither uses them
>
Nice report, thanks.
I can reproduce the problem here. Simple testcase:
main()
{
int fd;
fd = open("a", O_RDWR|O_CREAT|O_TRUNC, 0666);
if (fd < 0)
perror("open");
exit(0);
}
The same happens with CONFIG_NFS_ACL=y.
Binary searching shwos that the bug was introduced by
nfsacl-acl-umask-handling-workaround-in-nfs-client.patch
>>>>> "Adrian" == Adrian Bunk <[email protected]> writes:
Adrian> The current reiser4 help texts have two disadvantages: 1. they
Adrian> are more marketing speech than technical speech with some
Adrian> debatable statements 2. they are too long
Excellent patch, that help description has been totally inappropriate
since it was first introduced. I'm sure it will do fine on namesys'
website, but not in the kernel.
Adrian> Signed-off-by: Adrian Bunk <[email protected]>
Signed-off-by: Jes Sorensen <[email protected]>
Speaking of inappropriate components in reiser4:
[jes@tomahawk linux-2.6.11-rc5-mm1]$ grep PG_arch fs/reiser4/*.c
fs/reiser4/page_cache.c: page_flag_name(page, PG_arch_1),
fs/reiser4/txnmgr.c: assert("vs-1448", test_and_clear_bit(PG_arch_1, &node->pg->flags));
fs/reiser4/txnmgr.c: ON_DEBUG(set_bit(PG_arch_1, &(copy->pg)->flags));
Someone was obviously smoking something illegal, what part of 'arch'
did she/he not understand? I assume we can request this is fixed by
the patch owner asap.
Cheers,
Jes
Jes Sorensen <[email protected]> wrote:
>
> >>>>> "Adrian" == Adrian Bunk <[email protected]> writes:
>
> Adrian> The current reiser4 help texts have two disadvantages: 1. they
> Adrian> are more marketing speech than technical speech with some
> Adrian> debatable statements 2. they are too long
>
> Excellent patch, that help description has been totally inappropriate
> since it was first introduced. I'm sure it will do fine on namesys'
> website, but not in the kernel.
>
> Adrian> Signed-off-by: Adrian Bunk <[email protected]>
>
> Signed-off-by: Jes Sorensen <[email protected]>
>
> Speaking of inappropriate components in reiser4:
>
> [jes@tomahawk linux-2.6.11-rc5-mm1]$ grep PG_arch fs/reiser4/*.c
> fs/reiser4/page_cache.c: page_flag_name(page, PG_arch_1),
> fs/reiser4/txnmgr.c: assert("vs-1448", test_and_clear_bit(PG_arch_1, &node->pg->flags));
> fs/reiser4/txnmgr.c: ON_DEBUG(set_bit(PG_arch_1, &(copy->pg)->flags));
>
> Someone was obviously smoking something illegal, what part of 'arch'
> did she/he not understand? I assume we can request this is fixed by
> the patch owner asap.
>
Could the reiserfs team please comment?
If it's just debug then probably it would be better to add a new flag.
If these pages are never mmapped then it'll just happen to work, I guess.
But a filesystem really shouldn't be dinking with PG_arch_1.
Andrew Morton <[email protected]> writes:
> Jes Sorensen <[email protected]> wrote:
>>
[...]
>>
>> [jes@tomahawk linux-2.6.11-rc5-mm1]$ grep PG_arch fs/reiser4/*.c
>> fs/reiser4/page_cache.c: page_flag_name(page, PG_arch_1),
>> fs/reiser4/txnmgr.c: assert("vs-1448", test_and_clear_bit(PG_arch_1, &node->pg->flags));
>> fs/reiser4/txnmgr.c: ON_DEBUG(set_bit(PG_arch_1, &(copy->pg)->flags));
>>
>> Someone was obviously smoking something illegal, what part of 'arch'
>> did she/he not understand? I assume we can request this is fixed by
>> the patch owner asap.
>>
>
> Could the reiserfs team please comment?
>
> If it's just debug then probably it would be better to add a new flag.
>
Yes, this is debugging. I believe it can be removed now.
> If these pages are never mmapped then it'll just happen to work, I guess.
> But a filesystem really shouldn't be dinking with PG_arch_1.
Nikita.
Hello
On Wed, 2005-03-02 at 12:14, Andrew Morton wrote:
> Jes Sorensen <[email protected]> wrote:
> >
> > >>>>> "Adrian" == Adrian Bunk <[email protected]> writes:
> >
> > Adrian> The current reiser4 help texts have two disadvantages: 1. they
> > Adrian> are more marketing speech than technical speech with some
> > Adrian> debatable statements 2. they are too long
> >
> > Excellent patch, that help description has been totally inappropriate
> > since it was first introduced. I'm sure it will do fine on namesys'
> > website, but not in the kernel.
> >
> > Adrian> Signed-off-by: Adrian Bunk <[email protected]>
> >
> > Signed-off-by: Jes Sorensen <[email protected]>
> >
> > Speaking of inappropriate components in reiser4:
> >
> > [jes@tomahawk linux-2.6.11-rc5-mm1]$ grep PG_arch fs/reiser4/*.c
> > fs/reiser4/page_cache.c: page_flag_name(page, PG_arch_1),
> > fs/reiser4/txnmgr.c: assert("vs-1448", test_and_clear_bit(PG_arch_1, &node->pg->flags));
> > fs/reiser4/txnmgr.c: ON_DEBUG(set_bit(PG_arch_1, &(copy->pg)->flags));
> >
> > Someone was obviously smoking something illegal, what part of 'arch'
> > did she/he not understand? I assume we can request this is fixed by
> > the patch owner asap.
> >
>
> Could the reiserfs team please comment?
>
Yes, that was old debugging code. It is to be removed. The patch for
that is attached.
Please also apply another attached small bug fix.
> If it's just debug then probably it would be better to add a new flag.
>
> If these pages are never mmapped then it'll just happen to work, I guess.
> But a filesystem really shouldn't be dinking with PG_arch_1.
>
>
Hello,
On Wed, 2005-03-02 at 09:53, Andrew Morton wrote:
> Aurélien Francillon <[email protected]> wrote:
> > [...]
> > cvs diff Makefile
> > cvs diff: cannot create read lock in repository
> > `/mnt/iseran/roca/cvsroot/ldpc': No such file or directory
> > cvs [diff aborted]: read lock failed - giving up
> >
> > but the file is created and i can "cat " it without problem ...
This fixes it:
Index: linux-2.6.11/fs/nfs/nfs3proc.c
===================================================================
--- linux-2.6.11.orig/fs/nfs/nfs3proc.c
+++ linux-2.6.11/fs/nfs/nfs3proc.c
@@ -423,6 +423,9 @@ exit:
if (!inode)
goto out;
status = nfs3_set_default_acl(dir, inode, mode);
+ if (status)
+ goto out;
+ return inode;
}
out:
return ERR_PTR(status);
I'll reply to this message with an updated patch:
Re: [nfsacl v2 15/16] ACL umask handling workaround in nfs client
Regards,
--
Andreas Gruenbacher <[email protected]>
SUSE Labs, SUSE LINUX GMBH
Andreas Gruenbacher wrote:
> Hello,
>
> On Wed, 2005-03-02 at 09:53, Andrew Morton wrote:
>
>>Aurélien Francillon <[email protected]> wrote:
>>
>>>[...]
>>>cvs diff Makefile
>>> cvs diff: cannot create read lock in repository
>>>`/mnt/iseran/roca/cvsroot/ldpc': No such file or directory
>>>cvs [diff aborted]: read lock failed - giving up
>>>
>>>but the file is created and i can "cat " it without problem ...
>
>
> This fixes it:
yes, no more problems with nfs
thank you !
Aurélien
--
Lat: 45:11:43N (45.1954)
Lon: 5:43:36E ( 5.7268)
This patch contains possible cleanups including the following:
- make needlessly global code static
- plugin/compress/minilzo.c: many cleanups
- remove or #if 0 the following unused global functions:
- context.c: check_contexts
- flush.c: jnode_tostring
- flush.c: znode_tostring
- flush.c: pos_tostring
- flush_queue.c: fq_by_jnode
- inode.c: get_reiser4_inode_by_key
- lock.c: lock_mode
- plugin/cryptcompress.c: set_nrpages_by_inode
- file.c: readpages_unix_file
- plugin/item/ctail.c: ctail_make_unprepped_cluster
- plugin/item/extent_item_ops.c: show_extent
- plugin/item/tail.c: show_tail
- tree_walk.c: tree_walk
Signed-off-by: Adrian Bunk <[email protected]>
---
fs/reiser4/block_alloc.c | 2
fs/reiser4/cluster.h | 3
fs/reiser4/context.c | 2
fs/reiser4/debug.c | 13 +
fs/reiser4/debug.h | 2
fs/reiser4/flush.c | 6
fs/reiser4/flush.h | 4
fs/reiser4/flush_queue.c | 7
fs/reiser4/inode.c | 6
fs/reiser4/inode.h | 3
fs/reiser4/jnode.c | 8 -
fs/reiser4/jnode.h | 2
fs/reiser4/lock.c | 2
fs/reiser4/lock.h | 1
fs/reiser4/page_cache.c | 2
fs/reiser4/plugin/compress/lzoconf.h | 23 --
fs/reiser4/plugin/compress/minilzo.c | 179 +----------------------
fs/reiser4/plugin/cryptcompress.c | 15 -
fs/reiser4/plugin/file/file.c | 14 -
fs/reiser4/plugin/file/funcs.h | 2
fs/reiser4/plugin/item/ctail.c | 4
fs/reiser4/plugin/item/ctail.h | 1
fs/reiser4/plugin/item/extent.h | 1
fs/reiser4/plugin/item/extent_item_ops.c | 2
fs/reiser4/plugin/item/tail.c | 5
fs/reiser4/plugin/item/tail.h | 1
fs/reiser4/plugin/object.c | 2
fs/reiser4/plugin/object.h | 1
fs/reiser4/tree_walk.c | 4
fs/reiser4/txnmgr.h | 1
fs/reiser4/vfs_ops.c | 14 -
fs/reiser4/wander.c | 2
fs/reiser4/znode.c | 4
33 files changed, 66 insertions(+), 272 deletions(-)
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/block_alloc.c.old 2005-03-01 21:18:07.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/block_alloc.c 2005-03-01 21:18:14.000000000 +0100
@@ -932,7 +932,7 @@
#if REISER4_DEBUG
/* check "allocated" state of given block range */
-void
+static void
reiser4_check_blocks(const reiser4_block_nr * start, const reiser4_block_nr * len, int desired)
{
sa_check_blocks(start, len, desired);
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/context.c.old 2005-03-01 21:18:31.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/context.c 2005-03-01 21:19:08.000000000 +0100
@@ -47,6 +47,7 @@
/* lock protecting access to active_contexts. */
spinlock_t active_contexts_lock;
+#if 0
void
check_contexts(void)
{
@@ -58,6 +59,7 @@
}
spin_unlock(&active_contexts_lock);
}
+#endif /* 0 */
#endif /* REISER4_DEBUG */
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/debug.h.old 2005-03-01 21:19:25.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/debug.h 2005-03-01 21:19:31.000000000 +0100
@@ -176,8 +176,6 @@
REISER4_CHECK_NODE = 0x00000008
} reiser4_debug_flags;
-extern int reiser4_is_debugged(struct super_block *super, __u32 flag);
-
extern int is_in_reiser4_context(void);
/*
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/debug.c.old 2005-03-01 21:19:38.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/debug.c 2005-03-01 22:54:38.000000000 +0100
@@ -61,6 +61,11 @@
*/
static spinlock_t panic_guard = SPIN_LOCK_UNLOCKED;
+#if REISER4_DEBUG
+static int
+reiser4_is_debugged(struct super_block *super, __u32 flag);
+#endif
+
/* Your best friend. Call it on each occasion. This is called by
fs/reiser4/debug.h:reiser4_panic(). */
reiser4_internal void
@@ -303,19 +308,19 @@
return result;
}
-/* REISER4_DEBUG */
-#endif
-
/*
* check that some bits specified by @flags are set in ->debug_flags of the
* super block.
*/
-reiser4_internal int
+static int
reiser4_is_debugged(struct super_block *super, __u32 flag)
{
return get_super_private(super)->debug_flags & flag;
}
+/* REISER4_DEBUG */
+#endif
+
/* allocate memory. This calls kmalloc(), performs some additional checks, and
keeps track of how many memory was allocated on behalf of current super
block. */
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/flush.h.old 2005-03-01 21:21:31.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/flush.h 2005-03-01 21:21:40.000000000 +0100
@@ -260,10 +260,6 @@
void done_fqs(void);
#if REISER4_DEBUG
-const char *jnode_tostring(jnode * node);
-#endif
-
-#if REISER4_DEBUG
#define check_preceder(blk) \
assert("nikita-2588", blk < reiser4_block_count(reiser4_get_current_sb()));
extern void check_pos(flush_pos_t *pos);
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/flush.c.old 2005-03-01 21:22:13.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/flush.c 2005-03-01 22:43:15.000000000 +0100
@@ -433,8 +433,6 @@
extent_is_unallocated(&scan->parent_coord), \
extent_unit_index(&scan->parent_coord) == index_jnode(scan->node)))
-const char *pos_tostring(flush_pos_t * pos);
-
/* This flush_cnt variable is used to track the number of concurrent flush operations,
useful for debugging. It is initialized in txnmgr.c out of laziness (because flush has
no static initializer function...) */
@@ -563,6 +561,8 @@
const char *coord_tween_tostring(between_enum n);
+#if 0
+
static void
jnode_tostring_internal(jnode * node, char *buf)
{
@@ -682,6 +682,8 @@
return fmtbuf;
}
+#endif /* 0 */
+
#endif /* REISER4_TRACE */
/* TODO LIST (no particular order): */
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/txnmgr.h.old 2005-03-01 21:26:02.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/txnmgr.h 2005-03-01 21:26:06.000000000 +0100
@@ -597,7 +597,6 @@
};
extern int fq_by_atom(txn_atom *, flush_queue_t **);
-extern int fq_by_jnode(jnode *, flush_queue_t **);
extern int fq_by_jnode_gfp(jnode *, flush_queue_t **, int);
extern void fq_put_nolock(flush_queue_t *);
extern void fq_put(flush_queue_t *);
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/flush_queue.c.old 2005-03-01 21:25:07.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/flush_queue.c 2005-03-01 22:07:30.000000000 +0100
@@ -182,7 +182,7 @@
}
/* destroy flush queue object */
-reiser4_internal void
+static void
done_fq(flush_queue_t * fq)
{
assert("zam-763", capture_list_empty(ATOM_FQ_LIST(fq)));
@@ -717,11 +717,6 @@
return 0;
}
-reiser4_internal int fq_by_jnode(jnode * node, flush_queue_t ** fq)
-{
- return fq_by_jnode_gfp(node, fq, GFP_KERNEL);
-}
-
#if REISER4_DEBUG
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/inode.h.old 2005-03-01 21:26:31.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/inode.h 2005-03-01 21:27:38.000000000 +0100
@@ -166,8 +166,6 @@
void loading_init_once(reiser4_inode *);
void loading_alloc(reiser4_inode *);
void loading_destroy(reiser4_inode *);
-void loading_down(reiser4_inode *);
-void loading_up(reiser4_inode *);
#define I_JNODES (512) /* inode state bit. Set when in hash table there are more than 0 jnodes of unformatted nodes of
@@ -323,7 +321,6 @@
extern int setup_inode_ops(struct inode *inode, reiser4_object_create_data *);
extern struct inode *reiser4_iget(struct super_block *super, const reiser4_key * key, int silent);
extern void reiser4_iget_complete (struct inode * inode);
-extern int get_reiser4_inode_by_key (struct inode **, const reiser4_key *);
extern void inode_set_flag(struct inode *inode, reiser4_file_plugin_flags f);
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/inode.c.old 2005-03-01 21:26:50.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/inode.c 2005-03-01 21:27:28.000000000 +0100
@@ -386,12 +386,12 @@
#endif
}
-void loading_down(reiser4_inode *info)
+static void loading_down(reiser4_inode *info)
{
down(&info->loading);
}
-void loading_up(reiser4_inode *info)
+static void loading_up(reiser4_inode *info)
{
up(&info->loading);
}
@@ -678,6 +678,7 @@
UNLOCK_INODE(info);
}
+#if 0
reiser4_internal int
get_reiser4_inode_by_key (struct inode ** result, const reiser4_key * key)
{
@@ -711,6 +712,7 @@
*result = inode;
return 0;
}
+#endif /* 0 */
#if REISER4_DEBUG_OUTPUT
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/znode.c.old 2005-03-01 21:29:37.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/znode.c 2005-03-01 21:29:48.000000000 +0100
@@ -242,10 +242,6 @@
return result;
}
-#if REISER4_DEBUG
-extern void jnode_done(jnode * node, reiser4_tree * tree);
-#endif
-
/* free this znode */
reiser4_internal void
zfree(znode * node /* znode to free */ )
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/jnode.h.old 2005-03-01 21:30:40.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/jnode.h 2005-03-01 22:18:00.000000000 +0100
@@ -459,10 +459,8 @@
#if REISER4_DEBUG
extern int znode_is_any_locked(const znode * node);
extern void jnode_list_remove(jnode * node);
-extern int jnode_invariant(const jnode * node, int tlocked, int jlocked);
#else
#define jnode_list_remove(node) noop
-#define jnode_invariant(n, t, j) (1)
#endif
#if REISER4_DEBUG
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/jnode.c.old 2005-03-01 21:29:55.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/jnode.c 2005-03-01 21:33:05.000000000 +0100
@@ -129,6 +129,10 @@
static int jdelete(jnode * node);
static int jnode_try_drop(jnode * node);
+#if REISER4_DEBUG
+static int jnode_invariant(const jnode * node, int tlocked, int jlocked);
+#endif
+
/* true if valid page is attached to jnode */
static inline int jnode_is_parsed (jnode * node)
{
@@ -272,7 +276,7 @@
/*
* Remove jnode from ->all_jnodes list.
*/
-void
+static void
jnode_done(jnode * node, reiser4_tree * tree)
{
reiser4_super_info_data *sbinfo;
@@ -1887,7 +1891,7 @@
}
/* debugging aid: check znode invariant and panic if it doesn't hold */
-int
+static int
jnode_invariant(const jnode * node, int tlocked, int jlocked)
{
char const *failed_msg;
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/lock.h.old 2005-03-01 21:36:03.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/lock.h 2005-03-01 21:36:13.000000000 +0100
@@ -187,7 +187,6 @@
extern void move_lh(lock_handle * new, lock_handle * old);
extern void copy_lh(lock_handle * new, lock_handle * old);
extern void done_lh(lock_handle *);
-extern znode_lock_mode lock_mode(lock_handle *);
extern int prepare_to_sleep(lock_stack * owner);
extern void go_to_sleep(lock_stack * owner);
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/lock.c.old 2005-03-01 21:36:26.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/lock.c 2005-03-01 22:20:39.000000000 +0100
@@ -1154,6 +1154,7 @@
}
/* What kind of lock? */
+#if 0
reiser4_internal znode_lock_mode lock_mode(lock_handle * handle)
{
if (handle->owner == NULL) {
@@ -1164,6 +1165,7 @@
return ZNODE_WRITE_LOCK;
}
}
+#endif /* 0 */
/* Transfer a lock handle (presumably so that variables can be moved between stack and
heap locations). */
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/cryptcompress.c.old 2005-03-01 21:38:22.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/cryptcompress.c 2005-03-01 22:08:42.000000000 +0100
@@ -52,12 +52,9 @@
int ctail_read_cluster (reiser4_cluster_t *, struct inode *, int);
reiser4_key * append_cluster_key_ctail(const coord_t *, reiser4_key *);
int setattr_reserve(reiser4_tree *);
-int reserve_cut_iteration(reiser4_tree *);
int writepage_ctail(struct page *);
-int truncate_jnodes_range(struct inode *inode, unsigned long from, int count);
int cut_file_items(struct inode *inode, loff_t new_size, int update_sd, loff_t cur_size);
int delete_object(struct inode *inode, int mode);
-int ctail_make_unprepped_cluster(reiser4_cluster_t * clust, struct inode * inode);
int ctail_insert_unprepped_cluster(reiser4_cluster_t * clust, struct inode * inode);
int hint_is_set(const hint_t *hint);
reiser4_plugin * get_default_plugin(pset_member memb);
@@ -86,7 +83,7 @@
}
#if REISER4_DEBUG
-reiser4_internal int
+static int
crc_generic_check_ok(void)
{
return MIN_CRYPTO_BLOCKSIZE == DC_CHECKSUM_SIZE << 1;
@@ -470,7 +467,7 @@
}
#endif
-reiser4_internal int
+static int
new_cluster(reiser4_cluster_t * clust, struct inode * inode)
{
return (clust_to_off(clust->index, inode) >= inode->i_size);
@@ -508,6 +505,7 @@
return;
}
+#if 0
reiser4_internal void
set_nrpages_by_inode(reiser4_cluster_t * clust, struct inode * inode)
{
@@ -516,6 +514,7 @@
clust->nr_pages = count_to_nrpages(fsize_to_count(clust, inode));
}
+#endif /* 0 */
/* plugin->key_by_inode() */
/* see plugin/plugin.h for details */
@@ -1332,7 +1331,7 @@
}
/* collect unlocked cluster pages */
-reiser4_internal int
+static int
grab_cluster_pages(struct inode * inode, reiser4_cluster_t * clust)
{
int i;
@@ -1407,7 +1406,7 @@
}
#if REISER4_DEBUG
-reiser4_internal int
+static int
window_ok(reiser4_slide_t * win, struct inode * inode)
{
assert ("edward-1115", win != NULL);
@@ -1417,7 +1416,7 @@
(win->off + win->count + win->delta <= inode_cluster_size(inode));
}
-reiser4_internal int
+static int
cluster_ok(reiser4_cluster_t * clust, struct inode * inode)
{
assert("edward-279", clust != NULL);
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/page_cache.c.old 2005-03-01 21:38:37.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/page_cache.c 2005-03-01 22:08:00.000000000 +0100
@@ -660,7 +660,7 @@
#define JNODE_GANG_SIZE (16)
/* find all eflushed jnodes from range specified and invalidate them */
-reiser4_internal int
+static int
truncate_jnodes_range(struct inode *inode, pgoff_t from, pgoff_t count)
{
reiser4_inode *info;
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/compress/lzoconf.h.old 2005-03-01 21:41:06.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/compress/lzoconf.h 2005-03-01 22:26:43.000000000 +0100
@@ -409,38 +409,15 @@
(int)sizeof(lzo_compress_t))
LZO_EXTERN(int) __lzo_init2(unsigned,int,int,int,int,int,int,int,int,int);
-/* version functions (useful for shared libraries) */
-LZO_EXTERN(unsigned) lzo_version(void);
-LZO_EXTERN(const char *) lzo_version_string(void);
-LZO_EXTERN(const char *) lzo_version_date(void);
-LZO_EXTERN(const lzo_charp) _lzo_version_string(void);
-LZO_EXTERN(const lzo_charp) _lzo_version_date(void);
-
-/* string functions */
-LZO_EXTERN(int)
-lzo_memcmp(const lzo_voidp _s1, const lzo_voidp _s2, lzo_uint _len);
-LZO_EXTERN(lzo_voidp)
-lzo_memcpy(lzo_voidp _dest, const lzo_voidp _src, lzo_uint _len);
-LZO_EXTERN(lzo_voidp)
-lzo_memmove(lzo_voidp _dest, const lzo_voidp _src, lzo_uint _len);
-LZO_EXTERN(lzo_voidp)
-lzo_memset(lzo_voidp _s, int _c, lzo_uint _len);
-
/* checksum functions */
LZO_EXTERN(lzo_uint32)
-lzo_adler32(lzo_uint32 _adler, const lzo_byte *_buf, lzo_uint _len);
-LZO_EXTERN(lzo_uint32)
lzo_crc32(lzo_uint32 _c, const lzo_byte *_buf, lzo_uint _len);
/* misc. */
-LZO_EXTERN(lzo_bool) lzo_assert(int _expr);
-LZO_EXTERN(int) _lzo_config_check(void);
typedef union { lzo_bytep p; lzo_uint u; } __lzo_pu_u;
typedef union { lzo_bytep p; lzo_uint32 u32; } __lzo_pu32_u;
typedef union { void *vp; lzo_bytep bp; lzo_uint32 u32; long l; } lzo_align_t;
-/* align a char pointer on a boundary that is a multiple of `size' */
-LZO_EXTERN(unsigned) __lzo_align_gap(const lzo_voidp _ptr, lzo_uint _size);
#define LZO_PTR_ALIGN_UP(_ptr,_size) \
((_ptr) + (lzo_uint) __lzo_align_gap((const lzo_voidp)(_ptr),(lzo_uint)(_size)))
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/compress/minilzo.c.old 2005-03-01 21:41:20.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/compress/minilzo.c 2005-03-01 22:39:25.000000000 +0100
@@ -151,18 +151,6 @@
# undef HAVE_MEMCMP
#endif
-#if !defined(HAVE_MEMCMP)
-# undef memcmp
-# define memcmp lzo_memcmp
-#endif
-#if !defined(HAVE_MEMCPY)
-# undef memcpy
-# define memcpy lzo_memcpy
-#endif
-#if !defined(HAVE_MEMMOVE)
-# undef memmove
-# define memmove lzo_memmove
-#endif
#if !defined(HAVE_MEMSET)
# undef memset
# define memset lzo_memset
@@ -297,9 +285,6 @@
# endif
#endif
-__LZO_EXTERN_C int __lzo_init_done;
-__LZO_EXTERN_C const lzo_byte __lzo_copyright[];
-LZO_EXTERN(const lzo_byte *) lzo_copyright(void);
__LZO_EXTERN_C const lzo_uint32 _lzo_crc32_table[256];
#define _LZO_STRINGIZE(x) #x
@@ -428,9 +413,6 @@
#define PTR_DIFF(a,b) ((lzo_ptrdiff_t) (PTR(a) - PTR(b)))
#define pd(a,b) ((lzo_uint) ((a)-(b)))
-LZO_EXTERN(lzo_ptr_t)
-__lzo_ptr_linear(const lzo_voidp ptr);
-
typedef union
{
char a_char;
@@ -488,7 +470,7 @@
#endif
-LZO_PUBLIC(lzo_ptr_t)
+static lzo_ptr_t
__lzo_ptr_linear(const lzo_voidp ptr)
{
lzo_ptr_t p;
@@ -502,7 +484,7 @@
return p;
}
-LZO_PUBLIC(unsigned)
+static unsigned
__lzo_align_gap(const lzo_voidp ptr, lzo_uint size)
{
lzo_ptr_t p, s, n;
@@ -649,12 +631,6 @@
#endif
-LZO_PUBLIC(lzo_bool)
-lzo_assert(int expr)
-{
- return (expr) ? 1 : 0;
-}
-
/* If you use the LZO library in a product, you *must* keep this
* copyright string in the executable of your product.
*/
@@ -737,41 +713,6 @@
"$Copyright: LZO (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002 Markus Franz Xaver Johannes Oberhumer $\n";
#endif
-LZO_PUBLIC(const lzo_byte *)
-lzo_copyright(void)
-{
- return __lzo_copyright;
-}
-
-LZO_PUBLIC(unsigned)
-lzo_version(void)
-{
- return LZO_VERSION;
-}
-
-LZO_PUBLIC(const char *)
-lzo_version_string(void)
-{
- return LZO_VERSION_STRING;
-}
-
-LZO_PUBLIC(const char *)
-lzo_version_date(void)
-{
- return LZO_VERSION_DATE;
-}
-
-LZO_PUBLIC(const lzo_charp)
-_lzo_version_string(void)
-{
- return LZO_VERSION_STRING;
-}
-
-LZO_PUBLIC(const lzo_charp)
-_lzo_version_date(void)
-{
- return LZO_VERSION_DATE;
-}
#define LZO_BASE 65521u
#define LZO_NMAX 5552
@@ -782,109 +723,7 @@
#define LZO_DO8(buf,i) LZO_DO4(buf,i); LZO_DO4(buf,i+4);
#define LZO_DO16(buf,i) LZO_DO8(buf,i); LZO_DO8(buf,i+8);
-LZO_PUBLIC(lzo_uint32)
-lzo_adler32(lzo_uint32 adler, const lzo_byte *buf, lzo_uint len)
-{
- lzo_uint32 s1 = adler & 0xffff;
- lzo_uint32 s2 = (adler >> 16) & 0xffff;
- int k;
-
- if (buf == NULL)
- return 1;
-
- while (len > 0)
- {
- k = len < LZO_NMAX ? (int) len : LZO_NMAX;
- len -= k;
- if (k >= 16) do
- {
- LZO_DO16(buf,0);
- buf += 16;
- k -= 16;
- } while (k >= 16);
- if (k != 0) do
- {
- s1 += *buf++;
- s2 += s1;
- } while (--k > 0);
- s1 %= LZO_BASE;
- s2 %= LZO_BASE;
- }
- return (s2 << 16) | s1;
-}
-
-LZO_PUBLIC(int)
-lzo_memcmp(const lzo_voidp s1, const lzo_voidp s2, lzo_uint len)
-{
-#if (LZO_UINT_MAX <= SIZE_T_MAX) && defined(HAVE_MEMCMP)
- return memcmp(s1,s2,len);
-#else
- const lzo_byte *p1 = (const lzo_byte *) s1;
- const lzo_byte *p2 = (const lzo_byte *) s2;
- int d;
-
- if (len > 0) do
- {
- d = *p1 - *p2;
- if (d != 0)
- return d;
- p1++;
- p2++;
- }
- while (--len > 0);
- return 0;
-#endif
-}
-
-LZO_PUBLIC(lzo_voidp)
-lzo_memcpy(lzo_voidp dest, const lzo_voidp src, lzo_uint len)
-{
-#if (LZO_UINT_MAX <= SIZE_T_MAX) && defined(HAVE_MEMCPY)
- return memcpy(dest,src,len);
-#else
- lzo_byte *p1 = (lzo_byte *) dest;
- const lzo_byte *p2 = (const lzo_byte *) src;
-
- if (len <= 0 || p1 == p2)
- return dest;
- do
- *p1++ = *p2++;
- while (--len > 0);
- return dest;
-#endif
-}
-
-LZO_PUBLIC(lzo_voidp)
-lzo_memmove(lzo_voidp dest, const lzo_voidp src, lzo_uint len)
-{
-#if (LZO_UINT_MAX <= SIZE_T_MAX) && defined(HAVE_MEMMOVE)
- return memmove(dest,src,len);
-#else
- lzo_byte *p1 = (lzo_byte *) dest;
- const lzo_byte *p2 = (const lzo_byte *) src;
-
- if (len <= 0 || p1 == p2)
- return dest;
-
- if (p1 < p2)
- {
- do
- *p1++ = *p2++;
- while (--len > 0);
- }
- else
- {
- p1 += len;
- p2 += len;
- do
- *--p1 = *--p2;
- while (--len > 0);
- }
- return dest;
-#endif
-}
-
-LZO_PUBLIC(lzo_voidp)
+static lzo_voidp
lzo_memset(lzo_voidp s, int c, lzo_uint len)
{
#if (LZO_UINT_MAX <= SIZE_T_MAX) && defined(HAVE_MEMSET)
@@ -1169,7 +1008,7 @@
return r;
}
-LZO_PUBLIC(int)
+static int
_lzo_config_check(void)
{
lzo_bool r = 1;
@@ -1324,16 +1163,12 @@
#undef COMPILE_TIME_ASSERT
-int __lzo_init_done = 0;
-
LZO_PUBLIC(int)
__lzo_init2(unsigned v, int s1, int s2, int s3, int s4, int s5,
int s6, int s7, int s8, int s9)
{
int r;
- __lzo_init_done = 1;
-
if (v == 0)
return LZO_E_ERROR;
@@ -2549,8 +2384,10 @@
# define COPY4(dst,src) __COPY4((lzo_ptr_t)(dst),(lzo_ptr_t)(src))
#endif
+#if 0
+
#if defined(DO_DECOMPRESS)
-LZO_PUBLIC(int)
+static int
DO_DECOMPRESS ( const lzo_byte *in , lzo_uint in_len,
lzo_byte *out, lzo_uintp out_len,
lzo_voidp wrkmem )
@@ -2943,5 +2780,7 @@
#endif
}
+#endif /* 0 */
+
/***** End of minilzo.c *****/
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/cluster.h.old 2005-03-01 22:00:45.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/cluster.h 2005-03-01 22:02:02.000000000 +0100
@@ -231,8 +231,6 @@
void truncate_page_cluster(struct inode * inode, cloff_t start);
void set_hint_cluster(struct inode * inode, hint_t * hint, unsigned long index, znode_lock_mode mode);
int get_disk_cluster_locked(reiser4_cluster_t * clust, struct inode * inode, znode_lock_mode lock_mode);
-void set_nrpages_by_inode(reiser4_cluster_t * clust, struct inode * inode);
-int grab_cluster_pages(struct inode * inode, reiser4_cluster_t * clust);
void reset_cluster_params(reiser4_cluster_t * clust);
int prepare_page_cluster(struct inode *inode, reiser4_cluster_t *clust, int capture);
void release_cluster_pages(reiser4_cluster_t * clust, int from);
@@ -241,7 +239,6 @@
int tfm_cluster_is_uptodate (tfm_cluster_t * tc);
void tfm_cluster_set_uptodate (tfm_cluster_t * tc);
void tfm_cluster_clr_uptodate (tfm_cluster_t * tc);
-int new_cluster(reiser4_cluster_t * clust, struct inode * inode);
unsigned long clust_by_coord(const coord_t * coord, struct inode * inode);
static inline int
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/file/funcs.h.old 2005-03-01 22:03:07.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/file/funcs.h 2005-03-01 22:03:14.000000000 +0100
@@ -11,8 +11,6 @@
int finish_conversion(struct inode *inode);
void hint_init_zero(hint_t *);
-int find_file_item(hint_t *, const reiser4_key *, znode_lock_mode,
- ra_info_t *, struct inode *);
int find_file_item_nohint(coord_t *, lock_handle *, const reiser4_key *,
znode_lock_mode, struct inode *);
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/file/file.c.old 2005-03-01 22:03:23.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/file/file.c 2005-03-01 22:08:17.000000000 +0100
@@ -317,7 +317,7 @@
}
}
-reiser4_internal int
+static int
find_file_item(hint_t *hint, /* coord, lock handle and seal are here */
const reiser4_key *key, /* key of position in a file of next read/write */
znode_lock_mode lock_mode, /* which lock (read/write) to put on returned node */
@@ -490,7 +490,7 @@
}
/* estimate and reserve space needed to cut one item and update one stat data */
-reiser4_internal int reserve_cut_iteration(reiser4_tree *tree)
+static int reserve_cut_iteration(reiser4_tree *tree)
{
__u64 estimate = estimate_one_item_removal(tree)
+ estimate_one_insert_into_item(tree);
@@ -2535,16 +2535,6 @@
return result;
}
-/* plugin->u.file.can_add_link = common_file_can_add_link */
-/* VS-FIXME-HANS: why does this always resolve to extent pointer? this wrapper serves what purpose? get rid of it. */
-/* plugin->u.file.readpages method */
-reiser4_internal void
-readpages_unix_file(struct file *file, struct address_space *mapping,
- struct list_head *pages)
-{
- assert("vs-1740", 0);
-}
-
/* plugin->u.file.init_inode_data */
reiser4_internal void
init_inode_data_unix_file(struct inode *inode,
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/item/ctail.h.old 2005-03-01 22:05:38.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/item/ctail.h 2005-03-01 22:05:48.000000000 +0100
@@ -52,7 +52,6 @@
carry_kill_data *, reiser4_key * smallest_removed, reiser4_key *new_first);
int ctail_ok(const coord_t * coord);
int check_ctail(const coord_t * coord, const char **error);
-int coord_is_unprepped_ctail(const coord_t * coord);
/* plugin->u.item.s.* */
int read_ctail(struct file *, flow_t *, hint_t *);
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/item/ctail.c.old 2005-03-01 22:05:56.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/item/ctail.c 2005-03-01 23:12:44.000000000 +0100
@@ -61,7 +61,7 @@
return get_key_offset(item_key_by_coord(coord, &key)) >> PAGE_CACHE_SHIFT;
}
-reiser4_internal int
+static int
coord_is_unprepped_ctail(const coord_t * coord)
{
assert("edward-1233", coord != NULL);
@@ -1063,6 +1063,7 @@
}
/* Create a disk cluster of special 'minimal' format */
+#if 0
int ctail_make_unprepped_cluster(reiser4_cluster_t * clust, struct inode * inode)
{
char buf[UCTAIL_NR_UNITS];
@@ -1119,6 +1120,7 @@
#endif
return 0;
}
+#endif /* 0 */
static int
do_convert_ctail(flush_pos_t * pos, crc_write_mode_t mode)
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/item/extent.h.old 2005-03-01 22:09:18.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/item/extent.h 2005-03-01 22:09:23.000000000 +0100
@@ -118,7 +118,6 @@
reiser4_key *unit_key_extent(const coord_t *, reiser4_key *);
reiser4_key *max_unit_key_extent(const coord_t *, reiser4_key *);
void print_extent(const char *, coord_t *);
-void show_extent(struct seq_file *m, coord_t *coord);
int utmost_child_extent(const coord_t * coord, sideof side, jnode ** child);
int utmost_child_real_block_extent(const coord_t * coord, sideof side, reiser4_block_nr * block);
void item_stat_extent(const coord_t * coord, void *vp);
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/item/extent_item_ops.c.old 2005-03-01 22:09:31.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/item/extent_item_ops.c 2005-03-01 22:09:50.000000000 +0100
@@ -62,6 +62,7 @@
}
/* item_plugin->b.show */
+#if 0
reiser4_internal void
show_extent(struct seq_file *m, coord_t *coord)
{
@@ -69,6 +70,7 @@
ext = extent_by_coord(coord);
seq_printf(m, "%llu %llu", extent_get_start(ext), extent_get_width(ext));
}
+#endif /* 0 */
#if REISER4_DEBUG_OUTPUT
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/item/tail.h.old 2005-03-01 22:10:44.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/item/tail.h 2005-03-01 22:10:53.000000000 +0100
@@ -37,7 +37,6 @@
int get_block_address_tail(const coord_t *coord,
sector_t block, struct buffer_head *bh);
-void show_tail(struct seq_file *m, coord_t *coord);
int item_balance_dirty_pages(struct address_space *mapping, const flow_t *f,
hint_t *hint, int back_to_dirty, int set_hint);
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/item/tail.c.old 2005-03-01 22:11:01.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/item/tail.c 2005-03-01 22:11:25.000000000 +0100
@@ -66,11 +66,6 @@
return 1;
}
-reiser4_internal void show_tail(struct seq_file *m, coord_t *coord)
-{
- seq_printf(m, "length: %i", item_length_by_coord(coord));
-}
-
/* plugin->u.item.b.print
plugin->u.item.b.check */
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/object.h.old 2005-03-01 22:11:40.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/object.h 2005-03-01 22:11:45.000000000 +0100
@@ -24,7 +24,6 @@
extern reiser4_block_nr estimate_update_common(const struct inode *inode);
extern int prepare_write_common (struct file *, struct page *, unsigned, unsigned);
extern int key_by_inode_and_offset_common(struct inode *, loff_t, reiser4_key *);
-extern int setattr_reserve_common(reiser4_tree *);
extern int setattr_common(struct inode *, struct iattr *);
extern int cut_tree_worker_common(tap_t * tap, const reiser4_key * from_key,
const reiser4_key * to_key, reiser4_key * smallest_removed,
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/object.c.old 2005-03-01 22:11:52.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/plugin/object.c 2005-03-01 22:12:02.000000000 +0100
@@ -912,7 +912,7 @@
return dplug->attach(child, parent);
}
-reiser4_internal int
+static int
setattr_reserve_common(reiser4_tree *tree)
{
assert("vs-1096", is_grab_enabled(get_current_context()));
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/tree_walk.c.old 2005-03-01 22:13:40.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/tree_walk.c 2005-03-01 22:58:31.000000000 +0100
@@ -926,6 +926,8 @@
int node_completed:1;
};
+#if 0
+
/* it locks the root node, handles the restarts inside */
static int lock_tree_root (lock_handle * lock, znode_lock_mode mode)
{
@@ -1220,6 +1222,8 @@
return ret;
}
+#endif /* 0 */
+
/*
Local variables:
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/vfs_ops.c.old 2005-03-01 22:14:23.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/vfs_ops.c 2005-03-01 22:15:51.000000000 +0100
@@ -67,7 +67,7 @@
extern struct dentry_operations reiser4_dentry_operation;
-struct file_system_type reiser4_fs_type;
+static struct file_system_type reiser4_fs_type;
/* ->statfs() VFS method in reiser4 super_operations */
static int
@@ -241,7 +241,7 @@
/*
* initializer for dentry_fsdata_slab called during boot or module load.
*/
-reiser4_internal int init_dentry_fsdata(void)
+static int init_dentry_fsdata(void)
{
dentry_fsdata_slab = kmem_cache_create("dentry_fsdata",
sizeof (reiser4_dentry_fsdata),
@@ -255,7 +255,7 @@
/*
* dual to init_dentry_fsdata(). Called on module unload.
*/
-reiser4_internal void done_dentry_fsdata(void)
+static void done_dentry_fsdata(void)
{
kmem_cache_destroy(dentry_fsdata_slab);
}
@@ -303,7 +303,7 @@
/*
* initialize file_fsdata_slab. This is called during boot or module load.
*/
-reiser4_internal int init_file_fsdata(void)
+static int init_file_fsdata(void)
{
file_fsdata_slab = kmem_cache_create("file_fsdata",
sizeof (reiser4_file_fsdata),
@@ -317,7 +317,7 @@
/*
* dual to init_file_fsdata(). Called during module unload.
*/
-reiser4_internal void done_file_fsdata(void)
+static void done_file_fsdata(void)
{
kmem_cache_destroy(file_fsdata_slab);
}
@@ -438,7 +438,7 @@
}
/* initialize slab cache where reiser4 inodes will live */
-reiser4_internal int
+static int
init_inodecache(void)
{
inode_cache = kmem_cache_create("reiser4_inode",
@@ -1332,7 +1332,7 @@
MODULE_LICENSE("GPL");
/* description of the reiser4 file system type in the VFS eyes. */
-struct file_system_type reiser4_fs_type = {
+static struct file_system_type reiser4_fs_type = {
.owner = THIS_MODULE,
.name = "reiser4",
.fs_flags = FS_REQUIRES_DEV,
--- linux-2.6.11-rc5-mm1-full/fs/reiser4/wander.c.old 2005-03-01 22:16:07.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/fs/reiser4/wander.c 2005-03-01 22:16:22.000000000 +0100
@@ -1345,7 +1345,7 @@
/* Allocate wandered blocks for current atom's OVERWRITE SET and immediately
submit IO for allocated blocks. We assume that current atom is in a stage
when any atom fusion is impossible and atom is unlocked and it is safe. */
-reiser4_internal int
+static int
alloc_wandered_blocks(struct commit_handle *ch, flush_queue_t * fq)
{
reiser4_block_nr block;
This patch fixes the following:
- acpi_pcc_hotkey_add: although the function prototype was marked
__devinit, the actual function wasn't
- acpi_pcc_proc_init is called by acpi_pcc_hotkey_remove and
therefore has to be __devinit
- acpi_pcc_hotkey_remove: although the function prototype was marked
__devexit, the actual function wasn't
- acpi_pcc_remove_device is called by acpi_pcc_hotkey_remove and
therefore has to be __devexit
Signed-off-by: Adrian Bunk <[email protected]>
---
drivers/acpi/pcc_acpi.c | 19 ++++++++++---------
1 files changed, 10 insertions(+), 9 deletions(-)
--- linux-2.6.11-rc5-mm1-full/drivers/acpi/pcc_acpi.c.old 2005-03-02 10:57:35.000000000 +0100
+++ linux-2.6.11-rc5-mm1-full/drivers/acpi/pcc_acpi.c 2005-03-02 11:04:11.000000000 +0100
@@ -643,9 +643,9 @@
{ NULL, NULL, 0 },
};
-static int __init acpi_pcc_add_device(struct acpi_device *device,
- ProcItem *proc_items,
- int num)
+static int __devinit acpi_pcc_add_device(struct acpi_device *device,
+ ProcItem *proc_items,
+ int num)
{
struct acpi_hotkey *hotkey = \
(struct acpi_hotkey*)acpi_driver_data(device);
@@ -675,7 +675,7 @@
return 0;
}
-static int __init acpi_pcc_proc_init(struct acpi_device *device)
+static int __devinit acpi_pcc_proc_init(struct acpi_device *device)
{
acpi_status status;
struct acpi_hotkey *hotkey = \
@@ -707,9 +707,9 @@
return status;
}
-static void __exit acpi_pcc_remove_device(struct acpi_device *device,
- ProcItem *proc_items,
- int num)
+static void __devexit acpi_pcc_remove_device(struct acpi_device *device,
+ ProcItem *proc_items,
+ int num)
{
struct acpi_hotkey *hotkey =
(struct acpi_hotkey*)acpi_driver_data(device);
@@ -791,7 +791,7 @@
}
/* module init */
-static int acpi_pcc_hotkey_add (struct acpi_device *device)
+static int __devinit acpi_pcc_hotkey_add (struct acpi_device *device)
{
acpi_status status;
struct acpi_hotkey *hotkey = NULL;
@@ -851,7 +851,8 @@
return acpi_pcc_proc_init(device);
}
-static int acpi_pcc_hotkey_remove(struct acpi_device *device, int type)
+static int __devexit acpi_pcc_hotkey_remove(struct acpi_device *device,
+ int type)
{
acpi_status status;
struct acpi_hotkey *hotkey = acpi_driver_data(device);
[email protected] said:
> I just did a more complete grep of the symbols that can get config'd
> away (including CONFIG_AUDIT as well), and I think there's a few more
> missing pieces. Sorry about that. Jeff, Ralf, Martin, these look ok?
For UML, this is fine as far as it goes, but you're adding register references
to arch-independent code, so this is needed as well:
Index: linux-2.6.10/arch/um/kernel/ptrace.c
===================================================================
--- linux-2.6.10.orig/arch/um/kernel/ptrace.c 2005-03-03 00:14:46.000000000 -0500
+++ linux-2.6.10/arch/um/kernel/ptrace.c 2005-03-03 00:22:58.000000000 -0500
@@ -340,11 +341,15 @@
if (unlikely(current->audit_context)) {
if (!entryexit)
- audit_syscall_entry(current, regs->orig_eax,
- regs->ebx, regs->ecx,
- regs->edx, regs->esi);
+ audit_syscall_entry(current,
+ UPT_SYSCALL_NR(®s->regs),
+ UPT_SYSCALL_ARG1(®s->regs),
+ UPT_SYSCALL_ARG2(®s->regs),
+ UPT_SYSCALL_ARG3(®s->regs),
+ UPT_SYSCALL_ARG4(®s->regs));
else
- audit_syscall_exit(current, regs->eax);
+ audit_syscall_exit(current,
+ UPT_SYSCALL_RET(®s->regs));
}
/* Fake a debug trap */
* Jeff Dike ([email protected]) wrote:
> [email protected] said:
> > I just did a more complete grep of the symbols that can get config'd
> > away (including CONFIG_AUDIT as well), and I think there's a few more
> > missing pieces. Sorry about that. Jeff, Ralf, Martin, these look ok?
>
> For UML, this is fine as far as it goes, but you're adding register references
> to arch-independent code, so this is needed as well:
Thanks, I'll push that with rest of audit changes. Mind adding a
Signed-off-by?
thanks,
-chris
--
Linux Security Modules http://lsm.immunix.org http://lsm.bkbits.net
[email protected] said:
> Thanks, I'll push that with rest of audit changes.
Applies on top of your changes.
Signed-off-by: Jeff Dike <[email protected]>
Index: linux-2.6.10/arch/um/kernel/ptrace.c
===================================================================
--- linux-2.6.10.orig/arch/um/kernel/ptrace.c 2005-03-03 11:41:34.000000000 -0500
+++ linux-2.6.10/arch/um/kernel/ptrace.c 2005-03-03 11:42:41.000000000 -0500
@@ -341,11 +341,15 @@
if (unlikely(current->audit_context)) {
if (!entryexit)
- audit_syscall_entry(current, regs->orig_eax,
- regs->ebx, regs->ecx,
- regs->edx, regs->esi);
+ audit_syscall_entry(current,
+ UPT_SYSCALL_NR(®s->regs),
+ UPT_SYSCALL_ARG1(®s->regs),
+ UPT_SYSCALL_ARG2(®s->regs),
+ UPT_SYSCALL_ARG3(®s->regs),
+ UPT_SYSCALL_ARG4(®s->regs));
else
- audit_syscall_exit(current, regs->eax);
+ audit_syscall_exit(current,
+ UPT_SYSCALL_RET(®s->regs));
}
/* Fake a debug trap */
* Jeff Dike ([email protected]) wrote:
> [email protected] said:
> > Thanks, I'll push that with rest of audit changes.
>
> Applies on top of your changes.
>
> Signed-off-by: Jeff Dike <[email protected]>
Thanks,
-chris
--
Linux Security Modules http://lsm.immunix.org http://lsm.bkbits.net
ok
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Jeff Dike
Sent: Friday, March 04, 2005 3:25 AM
To: Chris Wright
Cc: Jeff Dike; Andrew Morton; [email protected]
Subject: Re: 2.6.11-rc5-mm1
[email protected] said:
> Thanks, I'll push that with rest of audit changes.
Applies on top of your changes.
Signed-off-by: Jeff Dike <[email protected]>
Index: linux-2.6.10/arch/um/kernel/ptrace.c
===================================================================
--- linux-2.6.10.orig/arch/um/kernel/ptrace.c 2005-03-03
11:41:34.000000000 -0500
+++ linux-2.6.10/arch/um/kernel/ptrace.c 2005-03-03
11:42:41.000000000 -0500
@@ -341,11 +341,15 @@
if (unlikely(current->audit_context)) {
if (!entryexit)
- audit_syscall_entry(current, regs->orig_eax,
- regs->ebx, regs->ecx,
- regs->edx, regs->esi);
+ audit_syscall_entry(current,
+ UPT_SYSCALL_NR(®s->regs),
+ UPT_SYSCALL_ARG1(®s->regs),
+ UPT_SYSCALL_ARG2(®s->regs),
+ UPT_SYSCALL_ARG3(®s->regs),
+ UPT_SYSCALL_ARG4(®s->regs));
else
- audit_syscall_exit(current, regs->eax);
+ audit_syscall_exit(current,
+ UPT_SYSCALL_RET(®s->regs));
}
/* Fake a debug trap */