Fix register access typo in synclinkmp.c
that caused value to be written to wrong register.
--
Paul Fulghum
[email protected]
--- linux-2.6.11/drivers/char/synclinkmp.c 2005-03-02 01:37:50.000000000 -0600
+++ linux-2.6.11-mg/drivers/char/synclinkmp.c 2005-03-04 11:02:29.000000000 -0600
@@ -1,5 +1,5 @@
/*
- * $Id: synclinkmp.c,v 4.29 2004/08/27 20:06:41 paulkf Exp $
+ * $Id: synclinkmp.c,v 4.34 2005/03/04 15:07:10 paulkf Exp $
*
* Device driver for Microgate SyncLink Multiport
* high speed multiprotocol serial adapter.
@@ -487,7 +487,7 @@ module_param_array(maxframe, int, NULL,
module_param_array(dosyncppp, int, NULL, 0);
static char *driver_name = "SyncLink MultiPort driver";
-static char *driver_version = "$Revision: 4.29 $";
+static char *driver_version = "$Revision: 4.34 $";
static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
static void synclinkmp_remove_one(struct pci_dev *dev);
@@ -4528,7 +4528,7 @@ void async_mode(SLMP_INFO *info)
* 07..05 Reserved, must be 0
* 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
*/
- write_reg(info, TRC0, 0x00);
+ write_reg(info, RRC, 0x00);
/* TRC0 Transmit Ready Control 0
*