2005-11-03 00:25:09

by Kristen Carlson Accardi

Subject: [patch 4/4] pci: call pci_read_irq for bridges

Call pci_read_irq() for bridges too, this ensures that the pin
value is stored for later use for bridges that require interrupts.

drivers/pci/probe.c | 1 +
1 files changed, 1 insertion(+)

Index: linux-2.6.13/drivers/pci/probe.c
===================================================================
--- linux-2.6.13.orig/drivers/pci/probe.c
+++ linux-2.6.13/drivers/pci/probe.c
@@ -624,6 +624,7 @@ static int pci_setup_device(struct pci_d
/* The PCI-to-PCI bridge spec requires that subtractive
decoding (i.e. transparent) bridge must have programming
interface code of 0x01. */
+ pci_read_irq(dev);
dev->transparent = ((dev->class & 0xff) == 1);
pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
break;

--

2005-11-03 00:55:59

by Kristen Carlson Accardi

Subject: Re: [patch 4/4] pci: call pci_read_irq for bridges

Call pci_read_irq() for bridges too, so that the pin value
is stored for bridges that require interrupts.

Signed-off-by: Kristen Carlson Accardi <[email protected]>

drivers/pci/probe.c | 1 +
1 files changed, 1 insertion(+)

Index: linux-2.6.13/drivers/pci/probe.c
===================================================================
--- linux-2.6.13.orig/drivers/pci/probe.c
+++ linux-2.6.13/drivers/pci/probe.c
@@ -624,6 +624,7 @@ static int pci_setup_device(struct pci_d
/* The PCI-to-PCI bridge spec requires that subtractive
decoding (i.e. transparent) bridge must have programming
interface code of 0x01. */
+ pci_read_irq(dev);
dev->transparent = ((dev->class & 0xff) == 1);
pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
break;