Dear sir,
i am cross compaling with arm-linux , i will face the following prombles
,u pls rectified it as soon as possible
1.Menuconfig has encountered a possible error in one of the kernel's
configuration files and is unable to continue. Here is the error
report:
Q> scripts/Menuconfig: line 832: MCmenu0: command not found
Please report this to the maintainer <[email protected]>. You may also
send a problem report to <[email protected]>.
Please indicate the kernel version you are trying to configure and
which menu you were trying to enter when this error occurred.
thanks
balamurugan
On Mon, 2006-01-09 at 04:59 +0000, [email protected]
wrote:
<snip>
> Please indicate the kernel version you are trying to configure and
> which menu you were trying to enter when this error occurred.
<snip>
You didn't follow the instructions that you pasted into the e-mail.
Please give more details...
Avishay Traeger
http://www.fsl.cs.sunysb.edu/~avishay/
On Mon, Jan 09, 2006 at 04:59:48AM -0000, [email protected] wrote:
> i am cross compaling with arm-linux , i will face the following prombles
> ,u pls rectified it as soon as possible
"Please fix my problem in your free time" is not the correct attitude
for this mailing list.
> 1.Menuconfig has encountered a possible error in one of the kernel's
> configuration files and is unable to continue. Here is the error
> report:
>
> Q> scripts/Menuconfig: line 832: MCmenu0: command not found
>
> Please report this to the maintainer <[email protected]>. You may also
> send a problem report to <[email protected]>.
>
> Please indicate the kernel version you are trying to configure and
> which menu you were trying to enter when this error occurred.
The 2.4 kernel is no longer supported on ARM. To fix your problem,
upgrade to the latest 2.6 kernel.
Erik
--
+-- Erik Mouw -- http://www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands