This patch changes Documentation/filesystems/udf.txt from saying that
read/write mounts on cd media are not supported to instead state the
current level of support. Specifically that it works fine on dvd+rw
media and can be made to work on cd-rw media via the pktcdvd device.
---
Documentation/filesystems/udf.txt | 13 +++++++++++--
1 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/Documentation/filesystems/udf.txt b/Documentation/filesystems/udf.txt
index 511b423..ed4ad3f 100644
--- a/Documentation/filesystems/udf.txt
+++ b/Documentation/filesystems/udf.txt
@@ -7,8 +7,17 @@ If you encounter problems with reading U
please report them to [email protected], which is the
developer's list.
-Write support requires a block driver which supports writing. The current
-scsi and ide cdrom drivers do not support writing.
+Write support requires a block driver which supports writing. Currently
+dvd+rw drives and media support true random sector writes, and so a udf
+filesystem on such devices can be directly mounted read/write. CD-RW
+media however, does not support this. Instead the media can be formatted
+for packet mode using the utility cdrwtool, then the pktcdvd driver can
+be bound to the underlying cd device to provide the required buffering
+and read-modify-write cycles to allow the filesystem random sector writes
+while providing the hardware with only full packet writes. While not
+required for dvd+rw media, use of the pktcdvd driver often enhances
+performance due to very poor read-modify-write support supplied internally
+by drive firmware.
-------------------------------------------------------------------------------
The following mount options are supported:
--
1.4.1