Hello,
[1.] Files if > 100 MB saving in USB memory stick 4 GB with FAT32. While
saving all files is broken.
[2.] I have USB memory stick A-DATA 4 GB with FAT32. When i trying to save
files in my USB and files is > of 100 MB, all files that i save is broken.
I put my USB in my laptop and mount it as: mount /dev/sda1 /mnt/usb-win
While i mount it, i got in my local disk and copy one file that is 520 MB.
The file is copying very slow (10 min). and after i see again my console i
wait light to my usb is off and i unmount it as: umount /mnt/usb-win
I get my USB stick and when i return to home i trying to copy file from my
USB to my windows and linux. Both OS unable to read file.
After some tryings i format my USB in FAT16 and now every thing is work
fine. I copy files to my USB and back to my hard drive and all files work
fine.
[3.] lsmod
# lsmod
Module Size Used by
sg 22552 0
sd_mod 17408 0
usb_storage 80448 0
snd_intel8x0m 15372 4
snd_seq_oss 30720 0
snd_seq_midi_event 6912 1 snd_seq_oss
snd_seq 47056 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 7308 2 snd_seq_oss,snd_seq
snd_pcm_oss 40224 0
snd_mixer_oss 15744 1 snd_pcm_oss
ipv6 231456 14
nls_iso8859_1 4992 1
nls_cp437 6656 1
vfat 11136 1
fat 47516 1 vfat
nls_base 7424 4 nls_iso8859_1,nls_cp437,vfat,fat
capability 4232 0
commoncap 6272 1 capability
psmouse 35464 0
pcmcia 31532 0
tsdev 6976 0
usbhid 37344 0
usbmouse 5376 0
ipw2200 128176 0
nvidia 4709172 22
ieee80211 30280 1 ipw2200
ieee80211_crypt 5760 1 ieee80211
ohci1394 31792 0
ieee1394 84440 1 ohci1394
yenta_socket 24460 2
rsrc_nonstatic 12416 1 yenta_socket
i2c_i801 7948 0
intel_agp 21148 1
agpgart 28108 2 nvidia,intel_agp
firmware_class 8832 2 pcmcia,ipw2200
i2c_core 18560 2 nvidia,i2c_i801
pcmcia_core 34712 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_intel8x0 29596 1
snd_ac97_codec 89888 2 snd_intel8x0m,snd_intel8x0
snd_ac97_bus 3072 1 snd_ac97_codec
snd_pcm 65540 6
snd_intel8x0m,snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 20868 2 snd_seq,snd_pcm
snd 45284 18
snd_intel8x0m,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
uhci_hcd 22156 0
soundcore 7392 1 snd
usbcore 116996 5 usb_storage,usbhid,usbmouse,uhci_hcd
snd_page_alloc 8712 3 snd_intel8x0m,snd_intel8x0,snd_pcm
serio_raw 6532 0
[4.] Linux version 2.6.19.1 (root@elrond) (gcc version 3.4.6) #1 SMP
PREEMPT Wed Dec 27 09:36:04 EET 2006
[5.] none
[6.] none
[7.]
[7.1]
Linux elrond 2.6.19.1 #1 SMP PREEMPT Wed Dec 27 09:36:04 EET 2006 i686
i686 i386 GNU/Linux
Gnu C 3.4.6
Gnu make 3.81
binutils 2.15.92.0.2
util-linux 2.12r
mount 2.12r
module-init-tools 3.2.2
e2fsprogs 1.39
jfsutils 1.1.11
reiserfsprogs 3.6.19
xfsprogs 2.8.10
pcmcia-cs 3.2.8
quota-tools 3.13.
PPP 2.4.4
Linux C Library 2.3.6
Dynamic linker (ldd) 2.3.6
Linux C++ Library 6.0.3
Procps 3.2.7
Net-tools 1.60
Kbd 1.12
Sh-utils 5.97
udev 097
Modules Loaded sg sd_mod usb_storage snd_intel8x0m snd_seq_oss
snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss ipv6
nls_iso8859_1 nls_cp437 vfat fat nls_base capability commoncap psmouse
pcmcia tsdev usbhid usbmouse ipw2200 nvidia ieee80211 ieee80211_crypt
ohci1394 ieee1394 yenta_socket rsrc_nonstatic i2c_i801 intel_agp agpgart
firmware_class i2c_core pcmcia_core snd_intel8x0 snd_ac97_codec
snd_ac97_bus snd_pcm snd_timer snd uhci_hcd soundcore usbcore
snd_page_alloc serio_raw
[7.2]
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.60GHz
stepping : 8
cpu MHz : 1596.512
cache size : 2048 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx up est tm2
bogomips : 3194.39
[7.3]
sg 22552 0 - Live 0xe0bc9000
sd_mod 17408 0 - Live 0xe0bc3000
usb_storage 80448 0 - Live 0xe0bdf000
snd_intel8x0m 15372 4 - Live 0xe0b05000
snd_seq_oss 30720 0 - Live 0xe0b0a000
snd_seq_midi_event 6912 1 snd_seq_oss, Live 0xe0ad1000
snd_seq 47056 4 snd_seq_oss,snd_seq_midi_event, Live 0xe0ae7000
snd_seq_device 7308 2 snd_seq_oss,snd_seq, Live 0xe0a86000
snd_pcm_oss 40224 0 - Live 0xe0af4000
snd_mixer_oss 15744 1 snd_pcm_oss, Live 0xe0ae2000
ipv6 231456 14 - Live 0xe0b27000
nls_iso8859_1 4992 1 - Live 0xe0aca000
nls_cp437 6656 1 - Live 0xe0a89000
vfat 11136 1 - Live 0xe0ac6000
fat 47516 1 vfat, Live 0xe0ad5000
nls_base 7424 4 nls_iso8859_1,nls_cp437,vfat,fat, Live 0xe0a7d000
capability 4232 0 - Live 0xe0a83000
commoncap 6272 1 capability, Live 0xe0a80000
psmouse 35464 0 - Live 0xe0abc000
pcmcia 31532 0 - Live 0xe0a54000
tsdev 6976 0 - Live 0xe097d000
usbhid 37344 0 - Live 0xe09d7000
usbmouse 5376 0 - Live 0xe097a000
ipw2200 128176 0 - Live 0xe09f1000
nvidia 4709172 22 - Live 0xe0ef3000 (P)
ieee80211 30280 1 ipw2200, Live 0xe09c1000
ieee80211_crypt 5760 1 ieee80211, Live 0xe094e000
ohci1394 31792 0 - Live 0xe0971000
ieee1394 84440 1 ohci1394, Live 0xe095b000
yenta_socket 24460 2 - Live 0xe093a000
rsrc_nonstatic 12416 1 yenta_socket, Live 0xe0914000
i2c_i801 7948 0 - Live 0xe0902000
intel_agp 21148 1 - Live 0xe08e3000
agpgart 28108 2 nvidia,intel_agp, Live 0xe090c000
firmware_class 8832 2 pcmcia,ipw2200, Live 0xe08df000
i2c_core 18560 2 nvidia,i2c_i801, Live 0xe08fc000
pcmcia_core 34712 3 pcmcia,yenta_socket,rsrc_nonstatic, Live 0xe08a0000
snd_intel8x0 29596 1 - Live 0xe08d6000
snd_ac97_codec 89888 2 snd_intel8x0m,snd_intel8x0, Live 0xe091a000
snd_ac97_bus 3072 1 snd_ac97_codec, Live 0xe087e000
snd_pcm 65540 6 snd_intel8x0m,snd_pcm_oss,snd_intel8x0,snd_ac97_codec,
Live 0xe08ea000
snd_timer 20868 2 snd_seq,snd_pcm, Live 0xe0899000
snd 45284 18
snd_intel8x0m,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,
Live 0xe08c9000
uhci_hcd 22156 0 - Live 0xe0892000
soundcore 7392 1 snd, Live 0xe0887000
usbcore 116996 5 usb_storage,usbhid,usbmouse,uhci_hcd, Live 0xe08ab000
snd_page_alloc 8712 3 snd_intel8x0m,snd_intel8x0,snd_pcm, Live 0xe0883000
serio_raw 6532 0 - Live 0xe0880000
[7.4]
# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
03c0-03df : vga+
03f6-03f6 : ide0
0400-041f : 0000:00:1f.3
0400-041f : i801_smbus
0480-04bf : 0000:00:1f.0
0800-087f : 0000:00:1f.0
0800-0803 : ACPI PM1a_EVT_BLK
0804-0805 : ACPI PM1a_CNT_BLK
0808-080b : ACPI PM_TMR
0810-0815 : ACPI CPU throttle
0828-082f : ACPI GPE0_BLK
0cf8-0cff : PCI conf1
1000-10ff : PCI CardBus #07
c800-c8ff : 0000:00:1e.3
c800-c8ff : Intel ICH6 Modem
d000-d07f : 0000:00:1e.3
d000-d07f : Intel ICH6 Modem
d080-d0bf : 0000:00:1e.2
d080-d0bf : Intel ICH6
d400-d4ff : 0000:00:1e.2
d400-d4ff : Intel ICH6
d800-d81f : 0000:00:1d.2
d800-d81f : uhci_hcd
d880-d89f : 0000:00:1d.1
d880-d89f : uhci_hcd
dc00-dc1f : 0000:00:1d.0
dc00-dc1f : uhci_hcd
e000-efff : PCI Bus #02
e000-e0ff : PCI CardBus #03
e400-e4ff : PCI CardBus #03
e800-e8ff : 0000:02:03.0
e800-e8ff : 8139too
ec00-ecff : PCI CardBus #07
ffa0-ffaf : 0000:00:1f.1
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
# cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cf800-000d07ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-1ffcffff : System RAM
00100000-002eb680 : Kernel code
002eb681-00394f73 : Kernel data
1ffd0000-1ffddfff : ACPI Tables
1ffde000-1fffffff : ACPI Non-volatile Storage
30000000-34ffffff : PCI Bus #02
30000000-31ffffff : PCI CardBus #03
32000000-33ffffff : PCI CardBus #07
34000000-3400ffff : 0000:02:03.0
36000000-37ffffff : PCI CardBus #03
38000000-39ffffff : PCI CardBus #07
d0000000-dfffffff : PCI Bus #01
d0000000-d7ffffff : 0000:01:00.0
e0000000-efffffff : reserved
f8fff800-f8fff8ff : 0000:00:1e.2
f8fff800-f8fff8ff : Intel ICH6
f8fffc00-f8fffdff : 0000:00:1e.2
f8fffc00-f8fffdff : Intel ICH6
f9000000-fbefffff : PCI Bus #01
f9000000-f9ffffff : 0000:01:00.0
fa000000-faffffff : 0000:01:00.0
fa000000-faffffff : nvidia
fbee0000-fbefffff : 0000:01:00.0
fbf00000-fbffffff : PCI Bus #02
fbf00000-fbf00fff : 0000:02:04.0
fbf00000-fbf00fff : yenta_socket
fbf01000-fbf01fff : 0000:02:04.1
fbf01000-fbf01fff : yenta_socket
fbffe000-fbffefff : 0000:02:09.0
fbffe000-fbffefff : ipw2200
fbfff000-fbfff7ff : 0000:02:04.2
fbfff000-fbfff7ff : ohci1394
fbfffc00-fbfffcff : 0000:02:03.0
fbfffc00-fbfffcff : 8139too
fed13000-fed19fff : reserved
fed1c000-fed1ffff : reserved
fff80000-ffffffff : reserved
[7.5]
# lspci -vvv
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express
Processor to DRAM Controller (rev 04)
Subsystem: Micro-Star International Co., Ltd. Unknown device 0321
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express
Root Port (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f9000000-fbefffff
Prefetchable memory behind bridge: d0000000-dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0
Enable+
Address: fee0100c Data: 41c1
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 2
Link: Latency L0s <256ns, L1 <4us
Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 16, PowerLimit 75.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [100] Virtual Channel
Capabilities: [140] Unknown (5)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 0321
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at dc00 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 0321
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at d880 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 0321
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 4: I/O ports at d800 [size=32]
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
(prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=0a, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 0000000030000000-0000000034f00000
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] #0d [0000]
00:1e.2 Multimedia audio controller: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
Subsystem: Micro-Star International Co., Ltd. Unknown device 0321
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at d400 [size=256]
Region 1: I/O ports at d080 [size=64]
Region 2: Memory at f8fffc00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at f8fff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97
Modem Controller (rev 04) (prog-if 00 [Generic])
Subsystem: Micro-Star International Co., Ltd. Unknown device 0121
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at c800 [size=256]
Region 1: I/O ports at d000 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface
Bridge (rev 04)
Subsystem: Micro-Star International Co., Ltd. Unknown device 0321
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) IDE Controller (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Unknown device 0321
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at ffa0 [size=16]
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 04)
Subsystem: Micro-Star International Co., Ltd. Unknown device 0321
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0400 [size=32]
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce Go
6600] (rev a2) (prog-if 00 [VGA])
Subsystem: Micro-Star International Co., Ltd. Unknown device 0321
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at f9000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fbee0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 <4us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
Link: Latency L0s <256ns, L1 <4us
Link: ASPM L0s L1 Enabled RCB 128 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting
02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Micro-Star International Co., Ltd. Unknown device 0161
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at fbfffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 34000000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
Subsystem: Micro-Star International Co., Ltd. Unknown device 0321
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbf00000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 30000000-31fff000 (prefetchable)
Memory window 1: 36000000-37fff000
I/O window 0: 0000e000-0000e0ff
I/O window 1: 0000e400-0000e4ff
BridgeCtl: Parity+ SERR+ ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
02:04.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
Subsystem: Micro-Star International Co., Ltd. Unknown device 0321
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fbf01000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 32000000-33fff000 (prefetchable)
Memory window 1: 38000000-39fff000
I/O window 0: 0000ec00-0000ecff
I/O window 1: 00001000-000010ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
02:04.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller
(rev 04) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 0321
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin C routed to IRQ 23
Region 0: Memory at fbfff000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+
02:09.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network
Connection (rev 05)
Subsystem: Intel Corporation Unknown device 2701
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
[7.6]
# cat /proc/scsi/scsi
cat: /proc/scsi/scsi: No such file or directory
[7.7]
none
Regards,
Condor
On Thu, 2007-01-18 at 11:22 +0200, Condor wrote:
> Hello,
>
> [1.] Files if > 100 MB saving in USB memory stick 4 GB with FAT32. While
> saving all files is broken.
im sorry, i do not understand this.
you are saying that if you copy files larger than 100mb into drive, all
files die?
> [2.] I have USB memory stick A-DATA 4 GB with FAT32. When i trying to save
> files in my USB and files is > of 100 MB, all files that i save is broken.
> I put my USB in my laptop and mount it as: mount /dev/sda1 /mnt/usb-win
> While i mount it, i got in my local disk and copy one file that is 520 MB.
> The file is copying very slow (10 min). and after i see again my console i
> wait light to my usb is off and i unmount it as: umount /mnt/usb-win
> I get my USB stick and when i return to home i trying to copy file from my
> USB to my windows and linux. Both OS unable to read file.
> After some tryings i format my USB in FAT16 and now every thing is work
> fine. I copy files to my USB and back to my hard drive and all files work
> fine.
okay, i think thats what you are saying, could you please try to run
dosfsck on it so we can see 100% whats wrong?
also, try to do this:
mount, copy, run command 'sync', unmount, pull out, and see if it works.
finally, one more question. you said it does not work when you take it
home, can you try this: mount, copy, unmount, mount, check to see if
file works.
> [3.] lsmod
> # lsmod
<snip>
> nvidia 4709172 22
ohh, tainted ;P naughty. Though i dont think this affects vfat.
<snip>
> Regards,
> Condor
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>> Hello,
>>
>> [1.] Files if > 100 MB saving in USB memory stick 4 GB with FAT32. While
>> saving all files is broken.
>im sorry, i do not understand this.
>
>you are saying that if you copy files larger than 100mb into drive, all
>files die?
Then it's probably time to run scandisk or fsck.vfat.
> On Thu, 2007-01-18 at 11:22 +0200, Condor wrote:
>> Hello,
>>
>> [1.] Files if > 100 MB saving in USB memory stick 4 GB with FAT32. While
>> saving all files is broken.
> im sorry, i do not understand this.
>
> you are saying that if you copy files larger than 100mb into drive, all
> files die?
No, only file when i copy is die.
>
>> [2.] I have USB memory stick A-DATA 4 GB with FAT32. When i trying to
>> save
>> files in my USB and files is > of 100 MB, all files that i save is
>> broken.
>> I put my USB in my laptop and mount it as: mount /dev/sda1 /mnt/usb-win
>> While i mount it, i got in my local disk and copy one file that is 520
>> MB.
>> The file is copying very slow (10 min). and after i see again my console
>> i
>> wait light to my usb is off and i unmount it as: umount /mnt/usb-win
>> I get my USB stick and when i return to home i trying to copy file from
>> my
>> USB to my windows and linux. Both OS unable to read file.
>> After some tryings i format my USB in FAT16 and now every thing is work
>> fine. I copy files to my USB and back to my hard drive and all files
>> work
>> fine.
>
> okay, i think thats what you are saying, could you please try to run
> dosfsck on it so we can see 100% whats wrong?
>
Yes, i run and it found error, i also run in windows scan drive, also
found errors. I't correct them and i make test again. After copy file
(unmount, sync ... ) i insert adapter again in windows and again unable to
copy file from usb to windows (linux say may be missing sectors, mount it
with read-only), run scan drive from windows and windows again found lost
sectors.
> also, try to do this:
> mount, copy, run command 'sync', unmount, pull out, and see if it works.
>
Yes this is that i make.
> finally, one more question. you said it does not work when you take it
> home, can you try this: mount, copy, unmount, mount, check to see if
> file works.
>
Yes i try one of the times and linux say may be sda1 have missing sectors
mount it with read-only.
>
>> [3.] lsmod
>> # lsmod
> <snip>
>> nvidia 4709172 22
> ohh, tainted ;P naughty. Though i dont think this affects vfat.
> <snip>
>
>> Regards,
>> Condor
>>
>> -
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel"
>> in
>> the body of a message to [email protected]
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>>
>
>
I no longer can make tests because i remove my fat32 from my usb stick and
i put it in to FAT16 and i make the exact tests and file is worked but on
fat16 not in fat32. I just report the problem, to be investigate from
kernel developers.
Regards,
Condor
"Condor" <[email protected]> writes:
> I no longer can make tests because i remove my fat32 from my usb stick and
> i put it in to FAT16 and i make the exact tests and file is worked but on
> fat16 not in fat32. I just report the problem, to be investigate from
> kernel developers.
Could you send the log of kernel? I'd like to see what the fat driver said.
And if you still have the log of dosfsck, please it too.
--
OGAWA Hirofumi <[email protected]>
> "Condor" <[email protected]> writes:
>
>> I no longer can make tests because i remove my fat32 from my usb stick
>> and
>> i put it in to FAT16 and i make the exact tests and file is worked but
>> on
>> fat16 not in fat32. I just report the problem, to be investigate from
>> kernel developers.
>
> Could you send the log of kernel? I'd like to see what the fat driver
> said.
> And if you still have the log of dosfsck, please it too.
> --
> OGAWA Hirofumi <[email protected]>
>
>From debug log:
Jan 16 14:56:13 elrond kernel: usb-storage: device found at 4
Jan 16 14:56:13 elrond kernel: usb-storage: waiting for device to settle
before scanning
Jan 16 14:56:18 elrond kernel: sda: Mode Sense: 00 00 00 00
Jan 16 14:56:18 elrond kernel: sda: Mode Sense: 00 00 00 00
Jan 16 14:56:18 elrond kernel: usb-storage: device scan complete
>From syslog:
Jan 16 14:56:18 elrond kernel: sda: assuming drive cache: write through
Jan 16 14:56:40 elrond kernel: FAT: Filesystem panic (dev sda1)
Jan 16 14:56:40 elrond kernel: invalid access to FAT (entry 0x0fffcf03)
Jan 16 14:56:40 elrond kernel: File system has been set read-only
Here are from message log:
an 16 14:13:55 elrond kernel: usb 2-1: new full speed USB device using
uhci_hcd and address 3
Jan 16 14:13:55 elrond kernel: usb 2-1: configuration #1 chosen from 1 choice
Jan 16 14:13:56 elrond kernel: Initializing USB Mass Storage driver...
Jan 16 14:13:56 elrond kernel: scsi0 : SCSI emulation for USB Mass Storage
devices
Jan 16 14:13:56 elrond kernel: usbcore: registered new interface driver
usb-storage
Jan 16 14:13:56 elrond kernel: USB Mass Storage support registered.
Jan 16 14:14:01 elrond kernel: scsi 0:0:0:0: Direct-Access USB 2.0
Flash Disk 0.00 PQ: 0 ANSI: 2
Jan 16 14:14:01 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
sectors (4127 MB)
Jan 16 14:14:01 elrond kernel: sda: Write Protect is off
Jan 16 14:14:01 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
sectors (4127 MB)
Jan 16 14:14:01 elrond kernel: sda: Write Protect is off
Jan 16 14:14:01 elrond kernel: sda: sda1 sda2
Jan 16 14:14:01 elrond kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan 16 14:14:01 elrond kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 16 14:28:22 elrond -- MARK --
Jan 16 14:37:52 elrond kernel: usb 2-1: USB disconnect, address 3
Jan 16 14:48:22 elrond -- MARK --
Jan 16 14:56:13 elrond kernel: usb 2-1: new full speed USB device using
uhci_hcd and address 4
Jan 16 14:56:13 elrond kernel: usb 2-1: configuration #1 chosen from 1 choice
Jan 16 14:56:13 elrond kernel: scsi1 : SCSI emulation for USB Mass Storage
devices
Jan 16 14:56:18 elrond kernel: scsi 1:0:0:0: Direct-Access USB 2.0
Flash Disk 0.00 PQ: 0 ANSI: 2
Jan 16 14:56:18 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
sectors (4127 MB)
Jan 16 14:56:18 elrond kernel: sda: Write Protect is off
Jan 16 14:56:18 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
sectors (4127 MB)
Jan 16 14:56:18 elrond kernel: sda: Write Protect is off
Jan 16 14:56:18 elrond kernel: sda: sda1 sda2
Jan 16 14:56:18 elrond kernel: sd 1:0:0:0: Attached scsi removable disk sda
Jan 16 14:56:18 elrond kernel: sd 1:0:0:0: Attached scsi generic sg0 type 0
Jan 16 14:58:14 elrond kernel: usb 2-1: USB disconnect, address 4
Jan 16 14:59:48 elrond /usr/sbin/gpm[1216]: *** info [mice.c(1766)]:
Jan 16 14:59:48 elrond /usr/sbin/gpm[1216]: imps2: Auto-detected
intellimouse PS/2
Jan 16 15:28:22 elrond -- MARK --
Jan 16 15:32:04 elrond kernel: usb 2-1: new full speed USB device using
uhci_hcd and address 5
Jan 16 15:32:04 elrond kernel: usb 2-1: configuration #1 chosen from 1 choice
Jan 16 15:32:04 elrond kernel: scsi2 : SCSI emulation for USB Mass Storage
devices
Jan 16 15:32:09 elrond kernel: scsi 2:0:0:0: Direct-Access USB 2.0
Flash Disk 0.00 PQ: 0 ANSI: 2
Jan 16 15:32:09 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
sectors (4127 MB)
Jan 16 15:32:09 elrond kernel: sda: Write Protect is off
Jan 16 15:32:09 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
sectors (4127 MB)
Jan 16 15:32:09 elrond kernel: sda: Write Protect is off
Jan 16 15:32:09 elrond kernel: sda: sda1 sda2
Jan 16 15:32:09 elrond kernel: sd 2:0:0:0: Attached scsi removable disk sda
Jan 16 15:32:09 elrond kernel: sd 2:0:0:0: Attached scsi generic sg0 type 0
Jan 16 15:39:16 elrond kernel: usb 2-1: reset full speed USB device using
uhci_hcd and address 5
Jan 16 15:50:24 elrond kernel: usb 2-1: USB disconnect, address 5
These are the logs that i have. I hope that this can help you.
Regards,
Condor
"Condor" <[email protected]> writes:
>>From debug log:
> Jan 16 14:56:13 elrond kernel: usb-storage: device found at 4
> Jan 16 14:56:13 elrond kernel: usb-storage: waiting for device to settle
> before scanning
> Jan 16 14:56:18 elrond kernel: sda: Mode Sense: 00 00 00 00
> Jan 16 14:56:18 elrond kernel: sda: Mode Sense: 00 00 00 00
> Jan 16 14:56:18 elrond kernel: usb-storage: device scan complete
>
>>From syslog:
> Jan 16 14:56:18 elrond kernel: sda: assuming drive cache: write through
> Jan 16 14:56:40 elrond kernel: FAT: Filesystem panic (dev sda1)
> Jan 16 14:56:40 elrond kernel: invalid access to FAT (entry 0x0fffcf03)
> Jan 16 14:56:40 elrond kernel: File system has been set read-only
The disk seems flash disk, and this entry may be on the middle of
erasing block. The flash disk might be unplugged before flushing dirty
buffer to disk. But, it's just my guess.
> Here are from message log:
>
> an 16 14:13:55 elrond kernel: usb 2-1: new full speed USB device using
> uhci_hcd and address 3
> Jan 16 14:13:55 elrond kernel: usb 2-1: configuration #1 chosen from 1 choice
> Jan 16 14:13:56 elrond kernel: Initializing USB Mass Storage driver...
> Jan 16 14:13:56 elrond kernel: scsi0 : SCSI emulation for USB Mass Storage
> devices
> Jan 16 14:13:56 elrond kernel: usbcore: registered new interface driver
> usb-storage
> Jan 16 14:13:56 elrond kernel: USB Mass Storage support registered.
> Jan 16 14:14:01 elrond kernel: scsi 0:0:0:0: Direct-Access USB 2.0
> Flash Disk 0.00 PQ: 0 ANSI: 2
> Jan 16 14:14:01 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
> sectors (4127 MB)
> Jan 16 14:14:01 elrond kernel: sda: Write Protect is off
> Jan 16 14:14:01 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
> sectors (4127 MB)
> Jan 16 14:14:01 elrond kernel: sda: Write Protect is off
> Jan 16 14:14:01 elrond kernel: sda: sda1 sda2
> Jan 16 14:14:01 elrond kernel: sd 0:0:0:0: Attached scsi removable disk sda
> Jan 16 14:14:01 elrond kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
> Jan 16 14:28:22 elrond -- MARK --
> Jan 16 14:37:52 elrond kernel: usb 2-1: USB disconnect, address 3
> Jan 16 14:48:22 elrond -- MARK --
> Jan 16 14:56:13 elrond kernel: usb 2-1: new full speed USB device using
> uhci_hcd and address 4
> Jan 16 14:56:13 elrond kernel: usb 2-1: configuration #1 chosen from 1 choice
> Jan 16 14:56:13 elrond kernel: scsi1 : SCSI emulation for USB Mass Storage
> devices
> Jan 16 14:56:18 elrond kernel: scsi 1:0:0:0: Direct-Access USB 2.0
> Flash Disk 0.00 PQ: 0 ANSI: 2
> Jan 16 14:56:18 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
> sectors (4127 MB)
> Jan 16 14:56:18 elrond kernel: sda: Write Protect is off
> Jan 16 14:56:18 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
> sectors (4127 MB)
> Jan 16 14:56:18 elrond kernel: sda: Write Protect is off
> Jan 16 14:56:18 elrond kernel: sda: sda1 sda2
> Jan 16 14:56:18 elrond kernel: sd 1:0:0:0: Attached scsi removable disk sda
> Jan 16 14:56:18 elrond kernel: sd 1:0:0:0: Attached scsi generic sg0 type 0
> Jan 16 14:58:14 elrond kernel: usb 2-1: USB disconnect, address 4
> Jan 16 14:59:48 elrond /usr/sbin/gpm[1216]: *** info [mice.c(1766)]:
> Jan 16 14:59:48 elrond /usr/sbin/gpm[1216]: imps2: Auto-detected
> intellimouse PS/2
> Jan 16 15:28:22 elrond -- MARK --
> Jan 16 15:32:04 elrond kernel: usb 2-1: new full speed USB device using
> uhci_hcd and address 5
> Jan 16 15:32:04 elrond kernel: usb 2-1: configuration #1 chosen from 1 choice
> Jan 16 15:32:04 elrond kernel: scsi2 : SCSI emulation for USB Mass Storage
> devices
> Jan 16 15:32:09 elrond kernel: scsi 2:0:0:0: Direct-Access USB 2.0
> Flash Disk 0.00 PQ: 0 ANSI: 2
> Jan 16 15:32:09 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
> sectors (4127 MB)
> Jan 16 15:32:09 elrond kernel: sda: Write Protect is off
> Jan 16 15:32:09 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
> sectors (4127 MB)
> Jan 16 15:32:09 elrond kernel: sda: Write Protect is off
> Jan 16 15:32:09 elrond kernel: sda: sda1 sda2
> Jan 16 15:32:09 elrond kernel: sd 2:0:0:0: Attached scsi removable disk sda
> Jan 16 15:32:09 elrond kernel: sd 2:0:0:0: Attached scsi generic sg0 type 0
> Jan 16 15:39:16 elrond kernel: usb 2-1: reset full speed USB device using
> uhci_hcd and address 5
> Jan 16 15:50:24 elrond kernel: usb 2-1: USB disconnect, address 5
>
>
> These are the logs that i have. I hope that this can help you.
>
> Regards,
> Condor
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
OGAWA Hirofumi <[email protected]>
> "Condor" <[email protected]> writes:
>
>>>From debug log:
>> Jan 16 14:56:13 elrond kernel: usb-storage: device found at 4
>> Jan 16 14:56:13 elrond kernel: usb-storage: waiting for device to settle
>> before scanning
>> Jan 16 14:56:18 elrond kernel: sda: Mode Sense: 00 00 00 00
>> Jan 16 14:56:18 elrond kernel: sda: Mode Sense: 00 00 00 00
>> Jan 16 14:56:18 elrond kernel: usb-storage: device scan complete
>>
>>>From syslog:
>> Jan 16 14:56:18 elrond kernel: sda: assuming drive cache: write through
>> Jan 16 14:56:40 elrond kernel: FAT: Filesystem panic (dev sda1)
>> Jan 16 14:56:40 elrond kernel: invalid access to FAT (entry
>> 0x0fffcf03)
>> Jan 16 14:56:40 elrond kernel: File system has been set read-only
>
> The disk seems flash disk, and this entry may be on the middle of
> erasing block. The flash disk might be unplugged before flushing dirty
> buffer to disk. But, it's just my guess.
>
I don't know. I every time mount, copy, sync, unmount and every time files
larges 100 MB that i copy/move to flash is broken. Today i return this
flash to storage and i get new 8 GB, i make exacts test and every things
is work. This problem does not exist, but i tested in my home PC that is
new not in my office in my old laptop. I think that may be flash stick
have some problems or my laptop to work with USB 2.0. But i can guest
only. So i report that the problem is may be not a problem :)
>> Here are from message log:
>>
>> an 16 14:13:55 elrond kernel: usb 2-1: new full speed USB device using
>> uhci_hcd and address 3
>> Jan 16 14:13:55 elrond kernel: usb 2-1: configuration #1 chosen from 1
>> choice
>> Jan 16 14:13:56 elrond kernel: Initializing USB Mass Storage driver...
>> Jan 16 14:13:56 elrond kernel: scsi0 : SCSI emulation for USB Mass
>> Storage
>> devices
>> Jan 16 14:13:56 elrond kernel: usbcore: registered new interface driver
>> usb-storage
>> Jan 16 14:13:56 elrond kernel: USB Mass Storage support registered.
>> Jan 16 14:14:01 elrond kernel: scsi 0:0:0:0: Direct-Access USB 2.0
>> Flash Disk 0.00 PQ: 0 ANSI: 2
>> Jan 16 14:14:01 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
>> sectors (4127 MB)
>> Jan 16 14:14:01 elrond kernel: sda: Write Protect is off
>> Jan 16 14:14:01 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
>> sectors (4127 MB)
>> Jan 16 14:14:01 elrond kernel: sda: Write Protect is off
>> Jan 16 14:14:01 elrond kernel: sda: sda1 sda2
>> Jan 16 14:14:01 elrond kernel: sd 0:0:0:0: Attached scsi removable disk
>> sda
>> Jan 16 14:14:01 elrond kernel: sd 0:0:0:0: Attached scsi generic sg0
>> type 0
>> Jan 16 14:28:22 elrond -- MARK --
>> Jan 16 14:37:52 elrond kernel: usb 2-1: USB disconnect, address 3
>> Jan 16 14:48:22 elrond -- MARK --
>> Jan 16 14:56:13 elrond kernel: usb 2-1: new full speed USB device using
>> uhci_hcd and address 4
>> Jan 16 14:56:13 elrond kernel: usb 2-1: configuration #1 chosen from 1
>> choice
>> Jan 16 14:56:13 elrond kernel: scsi1 : SCSI emulation for USB Mass
>> Storage
>> devices
>> Jan 16 14:56:18 elrond kernel: scsi 1:0:0:0: Direct-Access USB 2.0
>> Flash Disk 0.00 PQ: 0 ANSI: 2
>> Jan 16 14:56:18 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
>> sectors (4127 MB)
>> Jan 16 14:56:18 elrond kernel: sda: Write Protect is off
>> Jan 16 14:56:18 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
>> sectors (4127 MB)
>> Jan 16 14:56:18 elrond kernel: sda: Write Protect is off
>> Jan 16 14:56:18 elrond kernel: sda: sda1 sda2
>> Jan 16 14:56:18 elrond kernel: sd 1:0:0:0: Attached scsi removable disk
>> sda
>> Jan 16 14:56:18 elrond kernel: sd 1:0:0:0: Attached scsi generic sg0
>> type 0
>> Jan 16 14:58:14 elrond kernel: usb 2-1: USB disconnect, address 4
>> Jan 16 14:59:48 elrond /usr/sbin/gpm[1216]: *** info [mice.c(1766)]:
>> Jan 16 14:59:48 elrond /usr/sbin/gpm[1216]: imps2: Auto-detected
>> intellimouse PS/2
>> Jan 16 15:28:22 elrond -- MARK --
>> Jan 16 15:32:04 elrond kernel: usb 2-1: new full speed USB device using
>> uhci_hcd and address 5
>> Jan 16 15:32:04 elrond kernel: usb 2-1: configuration #1 chosen from 1
>> choice
>> Jan 16 15:32:04 elrond kernel: scsi2 : SCSI emulation for USB Mass
>> Storage
>> devices
>> Jan 16 15:32:09 elrond kernel: scsi 2:0:0:0: Direct-Access USB 2.0
>> Flash Disk 0.00 PQ: 0 ANSI: 2
>> Jan 16 15:32:09 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
>> sectors (4127 MB)
>> Jan 16 15:32:09 elrond kernel: sda: Write Protect is off
>> Jan 16 15:32:09 elrond kernel: SCSI device sda: 8060927 512-byte hdwr
>> sectors (4127 MB)
>> Jan 16 15:32:09 elrond kernel: sda: Write Protect is off
>> Jan 16 15:32:09 elrond kernel: sda: sda1 sda2
>> Jan 16 15:32:09 elrond kernel: sd 2:0:0:0: Attached scsi removable disk
>> sda
>> Jan 16 15:32:09 elrond kernel: sd 2:0:0:0: Attached scsi generic sg0
>> type 0
>> Jan 16 15:39:16 elrond kernel: usb 2-1: reset full speed USB device
>> using
>> uhci_hcd and address 5
>> Jan 16 15:50:24 elrond kernel: usb 2-1: USB disconnect, address 5
>>
>>
>> These are the logs that i have. I hope that this can help you.
>>
>> Regards,
>> Condor
>>
> OGAWA Hirofumi <[email protected]>
>
Regards,
Condor