The Blackfin Ethernet MAC driver does not compile. It seems the driver is
missing some pinmux defines.
CC drivers/net/bfin_mac.o
drivers/net/bfin_mac.c: In function 'setup_pin_mux':
drivers/net/bfin_mac.c:275: error: 'P_MII0' undeclared (first use in
this function)
drivers/net/bfin_mac.c:275: error: (Each undeclared identifier is
reported only once
drivers/net/bfin_mac.c:275: error: for each function it appears in.)
drivers/net/bfin_mac.c:279: error: implicit declaration of function
'peripheral_request_list'
drivers/net/bfin_mac.c:285: error: implicit declaration of function
'peripheral_free_list'
make[2]: *** [drivers/net/bfin_mac.o] Error 1
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2
On Tue 2 Oct 2007 07:30, Kalle Pokki pondered:
> The Blackfin Ethernet MAC driver does not compile. It seems the driver is
> missing some pinmux defines.
>
> CC drivers/net/bfin_mac.o
> drivers/net/bfin_mac.c: In function 'setup_pin_mux':
> drivers/net/bfin_mac.c:275: error: 'P_MII0' undeclared (first use in
> this function)
> drivers/net/bfin_mac.c:275: error: (Each undeclared identifier is
> reported only once
> drivers/net/bfin_mac.c:275: error: for each function it appears in.)
Unfortunately, Bryan is out for the week, so he can't update things..
The updates to include/asm-blackfin/mach-bf537/portmux.h seem to have been
missing from Bryan's git tree, and therefore were not pushed to Linus's tree.
Sigh. - Sorry about that.
When Bryan gets back, he will update things, but for now, this might work. (I
don't know if there are any other interdependencies).
--- portmux.h 2007-10-02 11:18:34.000000000 -0400
+++ ./linux-2.6.x/include/asm-blackfin/mach-bf537/portmux.h 2007-08-18
19:37:22.000000000 -0400
@@ -99,11 +99,44 @@
#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(PORT_PJ8) | P_FUNCT(0))
#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(PORT_PJ9) | P_FUNCT(0))
#define P_SPORT0_TFS (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(0))
-#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
+#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(0))
#define P_CAN0_RX (P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(1))
#define P_CAN0_TX (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(1))
#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(1))
#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(2))
-#endif /* _MACH_PORTMUX_H_ */
+#define P_MII0 {\
+ P_MII0_ETxD0, \
+ P_MII0_ETxD1, \
+ P_MII0_ETxD2, \
+ P_MII0_ETxD3, \
+ P_MII0_ETxEN, \
+ P_MII0_TxCLK, \
+ P_MII0_PHYINT, \
+ P_MII0_COL, \
+ P_MII0_ERxD0, \
+ P_MII0_ERxD1, \
+ P_MII0_ERxD2, \
+ P_MII0_ERxD3, \
+ P_MII0_ERxDV, \
+ P_MII0_ERxCLK, \
+ P_MII0_ERxER, \
+ P_MII0_CRS, \
+ P_MDC, \
+ P_MDIO, 0}
+
+
+#define P_RMII0 {\
+ P_MII0_ETxD0, \
+ P_MII0_ETxD1, \
+ P_MII0_ETxEN, \
+ P_MII0_ERxD0, \
+ P_MII0_ERxD1, \
+ P_MII0_ERxER, \
+ P_RMII0_REF_CLK, \
+ P_RMII0_MDINT, \
+ P_RMII0_CRS_DV, \
+ P_MDC, \
+ P_MDIO, 0}
+#endif /* _MACH_PORTMUX_H_ */
> drivers/net/bfin_mac.c:279: error: implicit declaration of function
> 'peripheral_request_list'
> drivers/net/bfin_mac.c:285: error: implicit declaration of function
> 'peripheral_free_list'
Arg.
This was in an arch/blackfin/kernel/bfin_gpio.c update that hasn't seem to
made it either.
In the future - we will make sure driver submissions are done in the correct
order - so the proper infrastructure is in the tree before the driver is
submitted. - Sorry.
Index: arch/blackfin/kernel/bfin_gpio.c
===================================================================
--- arch/blackfin/kernel/bfin_gpio.c (revision 3403)
+++ arch/blackfin/kernel/bfin_gpio.c (revision 3404)
@@ -84,6 +84,7 @@
#include <linux/err.h>
#include <asm/blackfin.h>
#include <asm/gpio.h>
+#include <asm/portmux.h>
#include <linux/irq.h>
#ifdef BF533_FAMILY
@@ -115,8 +116,12 @@
};
#endif
-static unsigned short reserved_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS + 16)];
+char *str_ident = NULL;
+#define RESOURCE_LABEL_SIZE 16
+
#ifdef CONFIG_PM
static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
@@ -143,13 +148,39 @@
return 0;
}
+static void set_label(unsigned short ident, const char *label)
+{
+
+ if (label && str_ident) {
+ strncpy(str_ident + ident * RESOURCE_LABEL_SIZE, label,
+ RESOURCE_LABEL_SIZE);
+ str_ident[ident * RESOURCE_LABEL_SIZE +
+ RESOURCE_LABEL_SIZE - 1] = 0;
+ }
+}
+
+static char *get_label(unsigned short ident)
+{
+ if (!str_ident)
+ return "UNKNOWN";
+
+ return (str_ident[ident * RESOURCE_LABEL_SIZE] ?
+ (str_ident + ident * RESOURCE_LABEL_SIZE) : "UNKNOWN");
+}
+
+static int cmp_label(unsigned short ident, const char *label)
+{
+ if (label && str_ident)
+ return strncmp(str_ident + ident * RESOURCE_LABEL_SIZE,
+ label, strlen(label));
+ else
+ return -EINVAL;
+}
+
#ifdef BF537_FAMILY
static void port_setup(unsigned short gpio, unsigned short usage)
{
if (usage == GPIO_USAGE) {
- if (*port_fer[gpio_bank(gpio)] & gpio_bit(gpio))
- printk(KERN_WARNING "bfin-gpio: Possible Conflict with Peripheral "
- "usage and GPIO %d detected!\n", gpio);
*port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
} else
*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
@@ -159,7 +190,57 @@
# define port_setup(...) do { } while (0)
#endif
+#ifdef BF537_FAMILY
+#define PMUX_LUT_RES 0
+#define PMUX_LUT_OFFSET 1
+#define PMUX_LUT_ENTRIES 41
+#define PMUX_LUT_SIZE 2
+
+static unsigned short port_mux_lut[PMUX_LUT_ENTRIES][PMUX_LUT_SIZE] = {
+ {P_PPI0_D13, 11}, {P_PPI0_D14, 11}, {P_PPI0_D15, 11},
+ {P_SPORT1_TFS, 11}, {P_SPORT1_TSCLK, 11}, {P_SPORT1_DTPRI, 11},
+ {P_PPI0_D10, 10}, {P_PPI0_D11, 10}, {P_PPI0_D12, 10},
+ {P_SPORT1_RSCLK, 10}, {P_SPORT1_RFS, 10}, {P_SPORT1_DRPRI, 10},
+ {P_PPI0_D8, 9}, {P_PPI0_D9, 9}, {P_SPORT1_DRSEC, 9},
+ {P_SPORT1_DTSEC, 9}, {P_TMR2, 8}, {P_PPI0_FS3, 8}, {P_TMR3, 7},
+ {P_SPI0_SSEL4, 7}, {P_TMR4, 6}, {P_SPI0_SSEL5, 6}, {P_TMR5, 5},
+ {P_SPI0_SSEL6, 5}, {P_UART1_RX, 4}, {P_UART1_TX, 4}, {P_TMR6, 4},
+ {P_TMR7, 4}, {P_UART0_RX, 3}, {P_UART0_TX, 3}, {P_DMAR0, 3},
+ {P_DMAR1, 3}, {P_SPORT0_DTSEC, 1}, {P_SPORT0_DRSEC, 1},
+ {P_CAN0_RX, 1}, {P_CAN0_TX, 1}, {P_SPI0_SSEL7, 1},
+ {P_SPORT0_TFS, 0}, {P_SPORT0_DTPRI, 0}, {P_SPI0_SSEL2, 0},
+ {P_SPI0_SSEL3, 0}
+};
+
+static void portmux_setup(unsigned short per, unsigned short function)
+{
+ u16 y, muxreg, offset;
+
+ for (y = 0; y < PMUX_LUT_ENTRIES; y++) {
+ if (port_mux_lut[y][PMUX_LUT_RES] == per) {
+
+ /* SET PORTMUX REG */
+
+ offset = port_mux_lut[y][PMUX_LUT_OFFSET];
+ muxreg = bfin_read_PORT_MUX();
+
+ if (offset != 1) {
+ muxreg &= ~(1 << offset);
+ } else {
+ muxreg &= ~(3 << 1);
+ }
+
+ muxreg |= (function << offset);
+ bfin_write_PORT_MUX(muxreg);
+ }
+ }
+}
+
+#else
+# define portmux_setup(...) do { } while (0)
+#endif
+
static void default_gpio(unsigned short gpio)
{
unsigned short bank, bitmask;
@@ -179,22 +260,15 @@
static int __init bfin_gpio_init(void)
{
- int i;
+ str_ident = kzalloc(RESOURCE_LABEL_SIZE * 256, GFP_KERNEL);
+ if (!str_ident)
+ return -ENOMEM;
+
printk(KERN_INFO "Blackfin GPIO Controller\n");
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE)
- reserved_map[gpio_bank(i)] = 0;
+ return 0;
-#if defined(BF537_FAMILY) && (defined(CONFIG_BFIN_MAC) ||
defined(CONFIG_BFIN_MAC_MODULE))
-# if defined(CONFIG_BFIN_MAC_RMII)
- reserved_map[gpio_bank(PORT_H)] = 0xC373;
-# else
- reserved_map[gpio_bank(PORT_H)] = 0xFFFF;
-# endif
-#endif
-
- return 0;
}
arch_initcall(bfin_gpio_init);
@@ -223,7 +297,7 @@
void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
{ \
unsigned long flags; \
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
local_irq_save(flags); \
if (arg) \
gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
@@ -243,7 +317,7 @@
#define SET_GPIO_SC(name) \
void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
{ \
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
if (arg) \
gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
else \
@@ -258,7 +332,7 @@
void set_gpio_data(unsigned short gpio, unsigned short arg)
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
if (arg)
gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
@@ -277,7 +351,7 @@
void set_gpio_toggle(unsigned short gpio)
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
bfin_read_CHIPID();
@@ -286,7 +360,7 @@
#else
void set_gpio_toggle(unsigned short gpio)
{
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
}
#endif
@@ -350,7 +424,7 @@
{
unsigned long flags;
unsigned short ret;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->data >> gpio_sub_n(gpio));
bfin_read_CHIPID();
@@ -494,13 +568,14 @@
gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir;
gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge;
gpio_bank_saved[bank].both = gpio_bankb[bank]->both;
- gpio_bank_saved[bank].reserved = reserved_map[bank];
+ gpio_bank_saved[bank].reserved =
+ reserved_gpio_map[bank];
gpio = i;
while (mask) {
if (mask & 1) {
- reserved_map[gpio_bank(gpio)] |=
+ reserved_gpio_map[gpio_bank(gpio)] |=
gpio_bit(gpio);
bfin_gpio_wakeup_type(gpio,
wakeup_flags_map[gpio]);
@@ -540,7 +615,8 @@
gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge;
gpio_bankb[bank]->both = gpio_bank_saved[bank].both;
- reserved_map[bank] = gpio_bank_saved[bank].reserved;
+ reserved_gpio_map[bank] =
+ gpio_bank_saved[bank].reserved;
}
@@ -550,6 +626,140 @@
#endif
+
+
+
+int peripheral_request(unsigned short per, const char *label)
+{
+ unsigned long flags;
+ unsigned short ident = P_IDENT(per);
+
+ /*
+ * Don't cares are pins with only one dedicated function
+ */
+
+ if (per & P_DONTCARE)
+ return 0;
+
+ if (!(per & P_DEFINED))
+ return -ENODEV;
+
+ if (check_gpio(ident) < 0)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
+ printk(KERN_ERR
+ "%s: Peripheral %d is already reserved as GPIO by %s !\n",
+ __FUNCTION__, ident, get_label(ident));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) {
+
+ /*
+ * Pin functions like AMC address strobes my
+ * be requested and used by several drivers
+ */
+
+ if (!(per & P_MAYSHARE)) {
+
+ /*
+ * Allow that the identical pin function can
+ * be requested from the same driver twice
+ */
+
+ if (cmp_label(ident, label) == 0)
+ goto anyway;
+
+ printk(KERN_ERR
+ "%s: Peripheral %d function %d is already"
+ "reserved by %s !\n",
+ __FUNCTION__, ident, P_FUNCT2MUX(per),
+ get_label(ident));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ }
+
+anyway:
+
+
+ portmux_setup(per, P_FUNCT2MUX(per));
+
+ port_setup(ident, PERIPHERAL_USAGE);
+
+ reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
+ local_irq_restore(flags);
+ set_label(ident, label);
+
+ return 0;
+}
+EXPORT_SYMBOL(peripheral_request);
+
+int peripheral_request_list(unsigned short per[], const char *label)
+{
+ u16 cnt;
+ int ret;
+
+ for (cnt = 0; per[cnt] != 0; cnt++) {
+ ret = peripheral_request(per[cnt], label);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(peripheral_request_list);
+
+void peripheral_free(unsigned short per)
+{
+ unsigned long flags;
+ unsigned short ident = P_IDENT(per);
+
+ if (per & P_DONTCARE)
+ return;
+
+ if (!(per & P_DEFINED))
+ return;
+
+ if (check_gpio(ident) < 0)
+ return;
+
+ local_irq_save(flags);
+
+ if (unlikely(!(reserved_peri_map[gpio_bank(ident)]
+ & gpio_bit(ident)))) {
+ local_irq_restore(flags);
+ return;
+ }
+
+ if (!(per & P_MAYSHARE)) {
+ port_setup(ident, GPIO_USAGE);
+ }
+
+ reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident);
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(peripheral_free);
+
+void peripheral_free_list(unsigned short per[])
+{
+ u16 cnt;
+
+ for (cnt = 0; per[cnt] != 0; cnt++) {
+ peripheral_free(per[cnt]);
+ }
+
+}
+EXPORT_SYMBOL(peripheral_free_list);
+
/***********************************************************
*
* FUNCTIONS: Blackfin GPIO Driver
@@ -574,13 +784,13 @@
local_irq_save(flags);
- if (unlikely(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
dump_stack();
local_irq_restore(flags);
return -EBUSY;
}
- reserved_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+ reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
local_irq_restore(flags);
@@ -599,7 +809,7 @@
local_irq_save(flags);
- if (unlikely(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+ if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio);
dump_stack();
local_irq_restore(flags);
@@ -608,7 +818,7 @@
default_gpio(gpio);
- reserved_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
local_irq_restore(flags);
}
@@ -618,7 +828,7 @@
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
@@ -631,7 +841,7 @@
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
On Tue, 2007-10-02 at 19:30 +0800, Kalle Pokki wrote:
> The Blackfin Ethernet MAC driver does not compile. It seems the driver
> is
> missing some pinmux defines.
>
> CC drivers/net/bfin_mac.o
> drivers/net/bfin_mac.c: In function 'setup_pin_mux':
> drivers/net/bfin_mac.c:275: error: 'P_MII0' undeclared (first use in
> this function)
> drivers/net/bfin_mac.c:275: error: (Each undeclared identifier is
> reported only once
> drivers/net/bfin_mac.c:275: error: for each function it appears in.)
> drivers/net/bfin_mac.c:279: error: implicit declaration of function
> 'peripheral_request_list'
> drivers/net/bfin_mac.c:285: error: implicit declaration of function
> 'peripheral_free_list'
> make[2]: *** [drivers/net/bfin_mac.o] Error 1
> make[1]: *** [drivers/net] Error 2
> make: *** [drivers] Error 2
>
Sorry for missing the pinmux patches.
After Linus's git-pull, it should be fixed in the latest Linus mainline
git tree.
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=66b1f1a982bf4dbad9fa0de25b8d95c4936f05c4
Thanks a lot
-Bryan
On Tue, 2007-10-02 at 23:36 +0800, Robin Getz wrote:
> On Tue 2 Oct 2007 07:30, Kalle Pokki pondered:
> > The Blackfin Ethernet MAC driver does not compile. It seems the
> driver is
> > missing some pinmux defines.
> >
> > CC drivers/net/bfin_mac.o
> > drivers/net/bfin_mac.c: In function 'setup_pin_mux':
> > drivers/net/bfin_mac.c:275: error: 'P_MII0' undeclared (first use
> in
> > this function)
> > drivers/net/bfin_mac.c:275: error: (Each undeclared identifier is
> > reported only once
> > drivers/net/bfin_mac.c:275: error: for each function it appears in.)
>
> Unfortunately, Bryan is out for the week, so he can't update things..
I am here, although it is National Day holiday in China and I am not in
office.
>
> The updates to include/asm-blackfin/mach-bf537/portmux.h seem to have
> been
> missing from Bryan's git tree, and therefore were not pushed to
> Linus's tree.
>
Yes, it was not merged to Linus's tree almost one month ago.
But now Linus git-pull it from my git-tree
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=66b1f1a982bf4dbad9fa0de25b8d95c4936f05c4
> Sigh. - Sorry about that.
>
> When Bryan gets back, he will update things, but for now, this might
> work. (I
> don't know if there are any other interdependencies).
>
Sorry again, some important core API changes should be merged before
drivers.
>
> --- portmux.h 2007-10-02 11:18:34.000000000 -0400
> +++ ./linux-2.6.x/include/asm-blackfin/mach-bf537/portmux.h
> 2007-08-18
> 19:37:22.000000000 -0400
> @@ -99,11 +99,44 @@
> #define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(PORT_PJ8) | P_FUNCT(0))
> #define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(PORT_PJ9) | P_FUNCT(0))
> #define P_SPORT0_TFS (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(0))
> -#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
> +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(0))
> #define P_CAN0_RX (P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(1))
> #define P_CAN0_TX (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(1))
> #define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(1))
> #define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
> #define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(2))
>
> -#endif /* _MACH_PORTMUX_H_ */
> +#define P_MII0 {\
> + P_MII0_ETxD0, \
> + P_MII0_ETxD1, \
> + P_MII0_ETxD2, \
> + P_MII0_ETxD3, \
> + P_MII0_ETxEN, \
> + P_MII0_TxCLK, \
> + P_MII0_PHYINT, \
> + P_MII0_COL, \
> + P_MII0_ERxD0, \
> + P_MII0_ERxD1, \
> + P_MII0_ERxD2, \
> + P_MII0_ERxD3, \
> + P_MII0_ERxDV, \
> + P_MII0_ERxCLK, \
> + P_MII0_ERxER, \
> + P_MII0_CRS, \
> + P_MDC, \
> + P_MDIO, 0}
> +
> +
> +#define P_RMII0 {\
> + P_MII0_ETxD0, \
> + P_MII0_ETxD1, \
> + P_MII0_ETxEN, \
> + P_MII0_ERxD0, \
> + P_MII0_ERxD1, \
> + P_MII0_ERxER, \
> + P_RMII0_REF_CLK, \
> + P_RMII0_MDINT, \
> + P_RMII0_CRS_DV, \
> + P_MDC, \
> + P_MDIO, 0}
> +#endif /* _MACH_PORTMUX_H_ */
>
> > drivers/net/bfin_mac.c:279: error: implicit declaration of function
> > 'peripheral_request_list'
> > drivers/net/bfin_mac.c:285: error: implicit declaration of function
> > 'peripheral_free_list'
>
> Arg.
>
> This was in an arch/blackfin/kernel/bfin_gpio.c update that hasn't
> seem to
> made it either.
>
> In the future - we will make sure driver submissions are done in the
> correct
> order - so the proper infrastructure is in the tree before the driver
> is
> submitted. - Sorry.
>
I will try my best to keep them in order or fix it as soon as possible,
-:)))
[!snip!]
>
Thanks
-Bryan
>
On 10/4/07, Bryan Wu <[email protected]> wrote:
> Sorry for missing the pinmux patches.
> After Linus's git-pull, it should be fixed in the latest Linus mainline
> git tree.
Thanks, it is working now. I was also glad to see the binfmt_flat
patch going in.
Do you plan to get the PHY abstraction layer patches for the Blackfin
EMAC included in the upcoming merge window?
On Thu, 2007-10-04 at 22:26 +0800, Kalle Pokki wrote:
> On 10/4/07, Bryan Wu <[email protected]> wrote:
> > Sorry for missing the pinmux patches.
> > After Linus's git-pull, it should be fixed in the latest Linus
> mainline
> > git tree.
>
> Thanks, it is working now. I was also glad to see the binfmt_flat
> patch going in.
Yeah, thanks Linus to accept the patches
>
> Do you plan to get the PHY abstraction layer patches for the Blackfin
> EMAC included in the upcoming merge window?
Currently, it is in Jeff's netdev-2.6.git tree. IMO, Jeff will send it
to Linus when merge window open.
Regards
-Bryan Wu
>