Signed-off-by: Bryan Wu <[email protected]>
---
drivers/net/bfin_mac.c | 16 ++++++++++++----
1 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 4006a5d..ee39819 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -412,20 +412,26 @@ static void bf537_adjust_link(struct net_device *dev)
spin_unlock_irqrestore(&lp->lock, flags);
}
+/* MDC = 2.5 MHz */
+#define MDC_CLK 2500000
+
static int mii_probe(struct net_device *dev)
{
struct bf537mac_local *lp = netdev_priv(dev);
struct phy_device *phydev = NULL;
unsigned short sysctl;
int i;
+ u32 sclk, mdc_div;
/* Enable PHY output early */
if (!(bfin_read_VR_CTL() & PHYCLKOE))
bfin_write_VR_CTL(bfin_read_VR_CTL() | PHYCLKOE);
- /* MDC = 2.5 MHz */
+ sclk = get_sclk();
+ mdc_div = ((sclk / MDC_CLK) / 2) - 1;
+
sysctl = bfin_read_EMAC_SYSCTL();
- sysctl |= SET_MDCDIV(24);
+ sysctl |= SET_MDCDIV(mdc_div);
bfin_write_EMAC_SYSCTL(sysctl);
/* search for connect PHY device */
@@ -477,8 +483,10 @@ static int mii_probe(struct net_device *dev)
lp->phydev = phydev;
printk(KERN_INFO "%s: attached PHY driver [%s] "
- "(mii_bus:phy_addr=%s, irq=%d)\n",
- DRV_NAME, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
+ "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)"
+ "@sclk=%dMHz)\n",
+ DRV_NAME, phydev->drv->name, phydev->dev.bus_id, phydev->irq,
+ MDC_CLK, mdc_div, sclk/1000000);
return 0;
}
--
1.5.3.4
Signed-off-by: Bryan Wu <[email protected]>
---
drivers/net/bfin_mac.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index eb97175..4006a5d 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -296,7 +296,7 @@ static void mdio_poll(void)
/* poll the STABUSY bit */
while ((bfin_read_EMAC_STAADD()) & STABUSY) {
- mdelay(10);
+ udelay(1);
if (timeout_cnt-- < 0) {
printk(KERN_ERR DRV_NAME
": wait MDC/MDIO transaction to complete timeout\n");
@@ -551,7 +551,7 @@ static void adjust_tx_list(void)
*/
if (current_tx_ptr->next->next == tx_list_head) {
while (tx_list_head->status.status_word == 0) {
- mdelay(10);
+ mdelay(1);
if (tx_list_head->status.status_word != 0
|| !(bfin_read_DMA2_IRQ_STATUS() & 0x08)) {
goto adjust_head;
--
1.5.3.4
From: Aidan Williams <[email protected]>
The bf537 Ethernet MAC driver in the 2007R1.1-RC3 kernel (and the
current kernel) do not implement multicast hash filtering. This
is a performance problem if you have lots of multicast on your network.
This patch plugs the right bits into the multicast hash registers.
Signed-off-by: Aidan Williams <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
---
drivers/net/bfin_mac.c | 42 +++++++++++++++++++++++++++++++++++++++++-
1 files changed, 41 insertions(+), 1 deletions(-)
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index ee39819..c6586cd 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -11,6 +11,7 @@
* Description:
*
* Modified:
+ * 2006-12-19 Aidan Williams, multicast hash support
* Copyright 2004-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
@@ -800,6 +801,39 @@ static void bf537mac_timeout(struct net_device *dev)
netif_wake_queue(dev);
}
+static void bf537mac_multicast_hash(struct net_device *dev)
+{
+ u32 emac_hashhi, emac_hashlo;
+ struct dev_mc_list *dmi = dev->mc_list;
+ char *addrs;
+ int i;
+ u32 crc;
+
+ emac_hashhi = emac_hashlo = 0;
+
+ for (i = 0; i < dev->mc_count; i++) {
+ addrs = dmi->dmi_addr;
+ dmi = dmi->next;
+
+ /* skip non-multicast addresses */
+ if (!(*addrs & 1))
+ continue;
+
+ crc = ether_crc(ETH_ALEN, addrs);
+ crc >>= 26;
+
+ if (crc & 0x20)
+ emac_hashhi |= 1 << (crc & 0x1f);
+ else
+ emac_hashlo |= 1 << (crc & 0x1f);
+ }
+
+ bfin_write_EMAC_HASHHI(emac_hashhi);
+ bfin_write_EMAC_HASHLO(emac_hashlo);
+
+ return;
+}
+
/*
* This routine will, depending on the values passed to it,
* either make it accept multicast packets, go into
@@ -815,11 +849,17 @@ static void bf537mac_set_multicast_list(struct net_device *dev)
sysctl = bfin_read_EMAC_OPMODE();
sysctl |= RAF;
bfin_write_EMAC_OPMODE(sysctl);
- } else if (dev->flags & IFF_ALLMULTI || dev->mc_count) {
+ } else if (dev->flags & IFF_ALLMULTI) {
/* accept all multicast */
sysctl = bfin_read_EMAC_OPMODE();
sysctl |= PAM;
bfin_write_EMAC_OPMODE(sysctl);
+ } else if (dev->mc_count) {
+ /* set up multicast hash table */
+ sysctl = bfin_read_EMAC_OPMODE();
+ sysctl |= HM;
+ bfin_write_EMAC_OPMODE(sysctl);
+ bf537mac_multicast_hash(dev);
} else {
/* clear promisc or multicast mode */
sysctl = bfin_read_EMAC_OPMODE();
--
1.5.3.4
From: Vitja Makarov <[email protected]>
This patch puts phy in power-down mode when interface is down.
Also we should think about energy detect power-down mode, that will
decrease power consumption when no link.
Signed-off-by: Vitja Makarov <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
---
drivers/net/bfin_mac.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index e9bd059..f2368b7 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -884,10 +884,10 @@ static int bf537mac_open(struct net_device *dev)
return retval;
phy_start(lp->phydev);
+ phy_write(lp->phydev, MII_BMCR, BMCR_RESET);
setup_system_regs(dev);
bf537mac_disable();
bf537mac_enable();
-
pr_debug("hardware init finished\n");
netif_start_queue(dev);
netif_carrier_on(dev);
@@ -910,6 +910,7 @@ static int bf537mac_close(struct net_device *dev)
netif_carrier_off(dev);
phy_stop(lp->phydev);
+ phy_write(lp->phydev, MII_BMCR, BMCR_PDOWN);
/* clear everything */
bf537mac_shutdown(dev);
--
1.5.3.4
From: Mike Frysinger <[email protected]>
Signed-off-by: Mike Frysinger <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
---
drivers/net/bfin_mac.c | 32 ++++----------------------------
drivers/net/bfin_mac.h | 31 ++++---------------------------
2 files changed, 8 insertions(+), 55 deletions(-)
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index c6586cd..ed935e1 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -1,35 +1,11 @@
/*
- * File: drivers/net/bfin_mac.c
- * Based on:
- * Maintainer:
- * Bryan Wu <[email protected]>
+ * Blackfin On-Chip MAC Driver
*
- * Original author:
- * Luke Yang <[email protected]>
+ * Copyright 2004-2007 Analog Devices Inc.
*
- * Created:
- * Description:
+ * Enter bugs at http://blackfin.uclinux.org/
*
- * Modified:
- * 2006-12-19 Aidan Williams, multicast hash support
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software ; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation ; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY ; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program ; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#include <linux/init.h>
diff --git a/drivers/net/bfin_mac.h b/drivers/net/bfin_mac.h
index 5970ea7..f774d5a 100644
--- a/drivers/net/bfin_mac.h
+++ b/drivers/net/bfin_mac.h
@@ -1,34 +1,11 @@
/*
- * File: drivers/net/bfin_mac.c
- * Based on:
- * Maintainer:
- * Bryan Wu <[email protected]>
+ * Blackfin On-Chip MAC Driver
*
- * Original author:
- * Luke Yang <[email protected]>
+ * Copyright 2004-2007 Analog Devices Inc.
*
- * Created:
- * Description:
+ * Enter bugs at http://blackfin.uclinux.org/
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software ; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation ; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY ; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program ; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#define BFIN_MAC_CSUM_OFFLOAD
--
1.5.3.4
From: Alexey Demin <[email protected]>
It prevents overwritting new data from DMA.
Signed-off-by: Alexey Demin <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
---
drivers/net/bfin_mac.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index f2368b7..0a17fb4 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -651,6 +651,12 @@ static void bf537mac_rx(struct net_device *dev)
current_rx_ptr->skb = new_skb;
current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
+ /* Invidate the data cache of skb->data range when it is write back
+ * cache. It will prevent overwritting the new data from DMA
+ */
+ blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
+ (unsigned long)new_skb->end);
+
len = (unsigned short)((current_rx_ptr->status.status_word) & RX_FRLEN);
skb_put(skb, len);
blackfin_dcache_invalidate_range((unsigned long)skb->head,
--
1.5.3.4
Signed-off-by: Kalle Pokki <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
---
drivers/net/bfin_mac.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 0a17fb4..c993a32 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -408,7 +408,7 @@ static int mii_probe(struct net_device *dev)
mdc_div = ((sclk / MDC_CLK) / 2) - 1;
sysctl = bfin_read_EMAC_SYSCTL();
- sysctl |= SET_MDCDIV(mdc_div);
+ sysctl = (sysctl & ~MDCDIV) | SET_MDCDIV(mdc_div);
bfin_write_EMAC_SYSCTL(sysctl);
/* search for connect PHY device */
--
1.5.3.4
From: Michael Hennerich <[email protected]>
Signed-off-by: Michael Hennerich <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
---
drivers/net/Kconfig | 9 +++++----
drivers/net/bfin_mac.c | 6 +++---
2 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5a2d1dd..ca2552b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -814,8 +814,8 @@ config ULTRA32
will be called smc-ultra32.
config BFIN_MAC
- tristate "Blackfin 536/537 on-chip mac support"
- depends on NET_ETHERNET && (BF537 || BF536) && (!BF537_PORT_H)
+ tristate "Blackfin 527/536/537 on-chip mac support"
+ depends on NET_ETHERNET && (BF527 || BF537 || BF536) && (!BF537_PORT_H)
select CRC32
select MII
select PHYLIB
@@ -828,7 +828,7 @@ config BFIN_MAC
config BFIN_MAC_USE_L1
bool "Use L1 memory for rx/tx packets"
- depends on BFIN_MAC && BF537
+ depends on BFIN_MAC && (BF527 || BF537)
default y
help
To get maximum network performance, you should use L1 memory as rx/tx buffers.
@@ -855,7 +855,8 @@ config BFIN_RX_DESC_NUM
config BFIN_MAC_RMII
bool "RMII PHY Interface (EXPERIMENTAL)"
depends on BFIN_MAC && EXPERIMENTAL
- default n
+ default y if BFIN527_EZKIT
+ default n if BFIN537_STAMP
help
Use Reduced PHY MII Interface
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index ed935e1..e9bd059 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -42,7 +42,7 @@
#define DRV_NAME "bfin_mac"
#define DRV_VERSION "1.1"
#define DRV_AUTHOR "Bryan Wu, Luke Yang"
-#define DRV_DESC "Blackfin BF53[67] on-chip Ethernet MAC driver"
+#define DRV_DESC "Blackfin BF53[67] BF527 on-chip Ethernet MAC driver"
MODULE_AUTHOR(DRV_AUTHOR);
MODULE_LICENSE("GPL");
@@ -752,7 +752,7 @@ static void bf537mac_enable(void)
#if defined(CONFIG_BFIN_MAC_RMII)
opmode |= RMII; /* For Now only 100MBit are supported */
-#ifdef CONFIG_BF_REV_0_2
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) && CONFIG_BF_REV_0_2
opmode |= TE;
#endif
#endif
@@ -994,7 +994,7 @@ static int __init bf537mac_probe(struct net_device *dev)
/* register irq handler */
if (request_irq
(IRQ_MAC_RX, bf537mac_interrupt, IRQF_DISABLED | IRQF_SHARED,
- "BFIN537_MAC_RX", dev)) {
+ "EMAC_RX", dev)) {
printk(KERN_WARNING DRV_NAME
": Unable to attach BlackFin MAC RX interrupt\n");
return -EBUSY;
--
1.5.3.4
Bryan Wu wrote:
> Signed-off-by: Bryan Wu <[email protected]>
> ---
> drivers/net/bfin_mac.c | 4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
applied 1-8