2008-07-10 15:27:53

by Liam Girdwood

[permalink] [raw]
Subject: [PATCH 08/15] regulator: core kbuild files


This patch adds kernel build support for the regulator core.

Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Liam Girdwood <[email protected]>
---
arch/arm/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/regulator/Kconfig | 49 ++++++++++++++++++++++++++++++++++++++++++++
drivers/regulator/Makefile | 10 +++++++++
4 files changed, 62 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/Kconfig
create mode 100644 drivers/regulator/Makefile

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b786e68..2e532fb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1179,6 +1179,8 @@ source "drivers/dma/Kconfig"

source "drivers/dca/Kconfig"

+source "drivers/regulator/Kconfig"
+
source "drivers/uio/Kconfig"

endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index f65deda..2e2229e 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -94,3 +94,4 @@ obj-$(CONFIG_PPC_PS3) += ps3/
obj-$(CONFIG_OF) += of/
obj-$(CONFIG_SSB) += ssb/
obj-$(CONFIG_VIRTIO) += virtio/
+obj-$(CONFIG_REGULATOR) += regulator/
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
new file mode 100644
index 0000000..84f89ec
--- /dev/null
+++ b/drivers/regulator/Kconfig
@@ -0,0 +1,49 @@
+menu "Voltage and Current regulators"
+
+config REGULATOR
+ bool "Voltage and Current Regulator Support"
+ default n
+ help
+ Generic Voltage and Current Regulator support.
+
+ This framework is designed to provide a generic interface to voltage
+ and current regulators within the Linux kernel. It's intended to
+ provide voltage and current control to client or consumer drivers and
+ also provide status information to user space applications through a
+ sysfs interface.
+
+ The intention is to allow systems to dynamically control regulator
+ output in order to save power and prolong battery life. This applies
+ to both voltage regulators (where voltage output is controllable) and
+ current sinks (where current output is controllable).
+
+ This framework safely compiles out if not selected so that client
+ drivers can still be used in systems with no software controllable
+ regulators.
+
+ If unsure, say no.
+
+config REGULATOR_DEBUG
+ bool "Regulator debug support"
+ depends on REGULATOR
+ help
+ Say yes here to enable debugging support.
+
+config REGULATOR_FIXED_VOLTAGE
+ tristate
+ default n
+ select REGULATOR
+
+config REGULATOR_VIRTUAL_CONSUMER
+ tristate "Virtual regulator consumer support"
+ default n
+ select REGULATOR
+ help
+ This driver provides a virtual consumer for the voltage and
+ current regulator API which provides sysfs controls for
+ configuring the supplies requested. This is mainly useful
+ for test purposes.
+
+ If unsure, say no.
+
+endmenu
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
new file mode 100644
index 0000000..29528b7
--- /dev/null
+++ b/drivers/regulator/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for regulator drivers.
+#
+
+
+obj-$(CONFIG_REGULATOR) += core.o
+obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
+obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
+
+ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
--
1.5.4.3