Linus, please pull kgdb the kgdb git tree.
Summary:
- Add ARCH=arm kgdb support
- Add ARCH=powerpc kgdb support
- Add 2 more rs232 polled drivers for use with kgdboc
- Remove Kconfig option for a non-merged architecture
Details:
The ARCH=arm support was reviewed by rmk and changes were made during
the 2.6.26 development cycle and it has been in the linux-next tree
for some time. The original author has also acked this work now.
The powerpc kgdb code removes the left over pieces of the old ARCH=ppc
kgdb stub.
The kgdb test suite is known to pass correctly arm and powerpc.
Jason.
The following changes since commit c010b2f76c3032e48097a6eef291d8593d5d79a6:
Linus Torvalds (1):
Merge git://git.kernel.org/.../davem/net-2.6
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb.git for_linus
Jason Wessel (5):
kgdb: remove unused HAVE_ARCH_KGDB_SHADOW_INFO config variable
kgdb: support for ARCH=arm
kgdb, powerpc: arch specific powerpc kgdb support
kgdb: kgdboc console poll hooks for cpm uart
kgdb: kgdboc console poll hooks for mpsc uart
arch/arm/Kconfig | 1 +
arch/arm/kernel/Makefile | 1 +
arch/arm/kernel/kgdb.c | 201 +++++++++++++++
arch/arm/kernel/setup.c | 2 +
arch/arm/kernel/traps.c | 5 +
arch/powerpc/Kconfig | 1 +
arch/powerpc/Kconfig.debug | 50 +----
arch/powerpc/kernel/Makefile | 1 +
arch/powerpc/kernel/kgdb.c | 410 +++++++++++++++++++++++++++++++
arch/powerpc/kernel/setup_32.c | 16 --
arch/powerpc/platforms/powermac/setup.c | 6 -
drivers/serial/cpm_uart/cpm_uart_core.c | 95 +++++++-
drivers/serial/mpsc.c | 148 +++++++++++-
include/asm-arm/kgdb.h | 104 ++++++++
include/asm-arm/traps.h | 2 +
include/asm-powerpc/kgdb.h | 92 ++++----
lib/Kconfig.kgdb | 3 -
17 files changed, 1025 insertions(+), 113 deletions(-)
create mode 100644 arch/arm/kernel/kgdb.c
create mode 100644 arch/powerpc/kernel/kgdb.c
create mode 100644 include/asm-arm/kgdb.h
Remove HAVE_ARCH_KGDB_SHADOW_INFO because it does not
exist anywhere in the kernel mainline sources
Signed-off-by: Jason Wessel <[email protected]>
---
lib/Kconfig.kgdb | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
index a5d4b1d..2cfd272 100644
--- a/lib/Kconfig.kgdb
+++ b/lib/Kconfig.kgdb
@@ -1,7 +1,4 @@
-config HAVE_ARCH_KGDB_SHADOW_INFO
- bool
-
config HAVE_ARCH_KGDB
bool
--
1.5.5.1
This patch adds the ARCH=arm specific a kgdb backend, originally
written by Deepak Saxena <[email protected]> and George Davis
<[email protected]>. Geoff Levand <[email protected]>,
Nicolas Pitre, Manish Lachwani, and Jason Wessel have contributed
various fixups here as well.
The KGDB patch makes one change to the core ARM architecture such that
the traps are initialized early for use with the debugger or other
subsystems.
[ [email protected]: small cleanups. ]
[ [email protected]: fixed early_trap_init ]
Signed-off-by: Jason Wessel <[email protected]>
Acked-by: Deepak Saxena <[email protected]>
---
arch/arm/Kconfig | 1 +
arch/arm/kernel/Makefile | 1 +
arch/arm/kernel/kgdb.c | 201 ++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/kernel/setup.c | 2 +
arch/arm/kernel/traps.c | 5 +
include/asm-arm/kgdb.h | 104 ++++++++++++++++++++++++
include/asm-arm/traps.h | 2 +
7 files changed, 316 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/kernel/kgdb.c
create mode 100644 include/asm-arm/kgdb.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c7ad324..d048f68 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,6 +12,7 @@ config ARM
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select HAVE_OPROFILE
+ select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FTRACE if (!XIP_KERNEL)
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index eb9092c..1d296fc 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o
obj-$(CONFIG_ATAGS_PROC) += atags.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
+obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
new file mode 100644
index 0000000..aaffaec
--- /dev/null
+++ b/arch/arm/kernel/kgdb.c
@@ -0,0 +1,201 @@
+/*
+ * arch/arm/kernel/kgdb.c
+ *
+ * ARM KGDB support
+ *
+ * Copyright (c) 2002-2004 MontaVista Software, Inc
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors: George Davis <[email protected]>
+ * Deepak Saxena <[email protected]>
+ */
+#include <linux/kgdb.h>
+#include <asm/traps.h>
+
+/* Make a local copy of the registers passed into the handler (bletch) */
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+ int regno;
+
+ /* Initialize all to zero. */
+ for (regno = 0; regno < GDB_MAX_REGS; regno++)
+ gdb_regs[regno] = 0;
+
+ gdb_regs[_R0] = kernel_regs->ARM_r0;
+ gdb_regs[_R1] = kernel_regs->ARM_r1;
+ gdb_regs[_R2] = kernel_regs->ARM_r2;
+ gdb_regs[_R3] = kernel_regs->ARM_r3;
+ gdb_regs[_R4] = kernel_regs->ARM_r4;
+ gdb_regs[_R5] = kernel_regs->ARM_r5;
+ gdb_regs[_R6] = kernel_regs->ARM_r6;
+ gdb_regs[_R7] = kernel_regs->ARM_r7;
+ gdb_regs[_R8] = kernel_regs->ARM_r8;
+ gdb_regs[_R9] = kernel_regs->ARM_r9;
+ gdb_regs[_R10] = kernel_regs->ARM_r10;
+ gdb_regs[_FP] = kernel_regs->ARM_fp;
+ gdb_regs[_IP] = kernel_regs->ARM_ip;
+ gdb_regs[_SPT] = kernel_regs->ARM_sp;
+ gdb_regs[_LR] = kernel_regs->ARM_lr;
+ gdb_regs[_PC] = kernel_regs->ARM_pc;
+ gdb_regs[_CPSR] = kernel_regs->ARM_cpsr;
+}
+
+/* Copy local gdb registers back to kgdb regs, for later copy to kernel */
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+ kernel_regs->ARM_r0 = gdb_regs[_R0];
+ kernel_regs->ARM_r1 = gdb_regs[_R1];
+ kernel_regs->ARM_r2 = gdb_regs[_R2];
+ kernel_regs->ARM_r3 = gdb_regs[_R3];
+ kernel_regs->ARM_r4 = gdb_regs[_R4];
+ kernel_regs->ARM_r5 = gdb_regs[_R5];
+ kernel_regs->ARM_r6 = gdb_regs[_R6];
+ kernel_regs->ARM_r7 = gdb_regs[_R7];
+ kernel_regs->ARM_r8 = gdb_regs[_R8];
+ kernel_regs->ARM_r9 = gdb_regs[_R9];
+ kernel_regs->ARM_r10 = gdb_regs[_R10];
+ kernel_regs->ARM_fp = gdb_regs[_FP];
+ kernel_regs->ARM_ip = gdb_regs[_IP];
+ kernel_regs->ARM_sp = gdb_regs[_SPT];
+ kernel_regs->ARM_lr = gdb_regs[_LR];
+ kernel_regs->ARM_pc = gdb_regs[_PC];
+ kernel_regs->ARM_cpsr = gdb_regs[_CPSR];
+}
+
+void
+sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
+{
+ struct pt_regs *thread_regs;
+ int regno;
+
+ /* Just making sure... */
+ if (task == NULL)
+ return;
+
+ /* Initialize to zero */
+ for (regno = 0; regno < GDB_MAX_REGS; regno++)
+ gdb_regs[regno] = 0;
+
+ /* Otherwise, we have only some registers from switch_to() */
+ thread_regs = task_pt_regs(task);
+ gdb_regs[_R0] = thread_regs->ARM_r0;
+ gdb_regs[_R1] = thread_regs->ARM_r1;
+ gdb_regs[_R2] = thread_regs->ARM_r2;
+ gdb_regs[_R3] = thread_regs->ARM_r3;
+ gdb_regs[_R4] = thread_regs->ARM_r4;
+ gdb_regs[_R5] = thread_regs->ARM_r5;
+ gdb_regs[_R6] = thread_regs->ARM_r6;
+ gdb_regs[_R7] = thread_regs->ARM_r7;
+ gdb_regs[_R8] = thread_regs->ARM_r8;
+ gdb_regs[_R9] = thread_regs->ARM_r9;
+ gdb_regs[_R10] = thread_regs->ARM_r10;
+ gdb_regs[_FP] = thread_regs->ARM_fp;
+ gdb_regs[_IP] = thread_regs->ARM_ip;
+ gdb_regs[_SPT] = thread_regs->ARM_sp;
+ gdb_regs[_LR] = thread_regs->ARM_lr;
+ gdb_regs[_PC] = thread_regs->ARM_pc;
+ gdb_regs[_CPSR] = thread_regs->ARM_cpsr;
+}
+
+static int compiled_break;
+
+int kgdb_arch_handle_exception(int exception_vector, int signo,
+ int err_code, char *remcom_in_buffer,
+ char *remcom_out_buffer,
+ struct pt_regs *linux_regs)
+{
+ unsigned long addr;
+ char *ptr;
+
+ switch (remcom_in_buffer[0]) {
+ case 'D':
+ case 'k':
+ case 'c':
+ kgdb_contthread = NULL;
+
+ /*
+ * Try to read optional parameter, pc unchanged if no parm.
+ * If this was a compiled breakpoint, we need to move
+ * to the next instruction or we will just breakpoint
+ * over and over again.
+ */
+ ptr = &remcom_in_buffer[1];
+ if (kgdb_hex2long(&ptr, &addr))
+ linux_regs->ARM_pc = addr;
+ else if (compiled_break == 1)
+ linux_regs->ARM_pc += 4;
+
+ compiled_break = 0;
+
+ return 0;
+ }
+
+ return -1;
+}
+
+static int kgdb_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+ kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+ return 0;
+}
+
+static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+ compiled_break = 1;
+ kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+ return 0;
+}
+
+static struct undef_hook kgdb_brkpt_hook = {
+ .instr_mask = 0xffffffff,
+ .instr_val = KGDB_BREAKINST,
+ .fn = kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_hook = {
+ .instr_mask = 0xffffffff,
+ .instr_val = KGDB_COMPILED_BREAK,
+ .fn = kgdb_compiled_brk_fn
+};
+
+/**
+ * kgdb_arch_init - Perform any architecture specific initalization.
+ *
+ * This function will handle the initalization of any architecture
+ * specific callbacks.
+ */
+int kgdb_arch_init(void)
+{
+ register_undef_hook(&kgdb_brkpt_hook);
+ register_undef_hook(&kgdb_compiled_brkpt_hook);
+
+ return 0;
+}
+
+/**
+ * kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ * This function will handle the uninitalization of any architecture
+ * specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+ unregister_undef_hook(&kgdb_brkpt_hook);
+ unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+}
+
+/*
+ * Register our undef instruction hooks with ARM undef core.
+ * We regsiter a hook specifically looking for the KGB break inst
+ * and we handle the normal undef case within the do_undefinstr
+ * handler.
+ */
+struct kgdb_arch arch_kgdb_ops = {
+#ifndef __ARMEB__
+ .gdb_bpt_instr = {0xfe, 0xde, 0xff, 0xe7}
+#else /* ! __ARMEB__ */
+ .gdb_bpt_instr = {0xe7, 0xff, 0xde, 0xfe}
+#endif
+};
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index b7b0720..38f0e79 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -36,6 +36,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+#include <asm/traps.h>
#include "compat.h"
#include "atags.h"
@@ -853,6 +854,7 @@ void __init setup_arch(char **cmdline_p)
conswitchp = &dummy_con;
#endif
#endif
+ early_trap_init();
}
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 5595fdd..7277aef 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -708,6 +708,11 @@ EXPORT_SYMBOL(abort);
void __init trap_init(void)
{
+ return;
+}
+
+void __init early_trap_init(void)
+{
unsigned long vectors = CONFIG_VECTORS_BASE;
extern char __stubs_start[], __stubs_end[];
extern char __vectors_start[], __vectors_end[];
diff --git a/include/asm-arm/kgdb.h b/include/asm-arm/kgdb.h
new file mode 100644
index 0000000..67af4b8
--- /dev/null
+++ b/include/asm-arm/kgdb.h
@@ -0,0 +1,104 @@
+/*
+ * ARM KGDB support
+ *
+ * Author: Deepak Saxena <[email protected]>
+ *
+ * Copyright (C) 2002 MontaVista Software Inc.
+ *
+ */
+
+#ifndef __ARM_KGDB_H__
+#define __ARM_KGDB_H__
+
+#include <linux/ptrace.h>
+
+/*
+ * GDB assumes that we're a user process being debugged, so
+ * it will send us an SWI command to write into memory as the
+ * debug trap. When an SWI occurs, the next instruction addr is
+ * placed into R14_svc before jumping to the vector trap.
+ * This doesn't work for kernel debugging as we are already in SVC
+ * we would loose the kernel's LR, which is a bad thing. This
+ * is bad thing.
+ *
+ * By doing this as an undefined instruction trap, we force a mode
+ * switch from SVC to UND mode, allowing us to save full kernel state.
+ *
+ * We also define a KGDB_COMPILED_BREAK which can be used to compile
+ * in breakpoints. This is important for things like sysrq-G and for
+ * the initial breakpoint from trap_init().
+ *
+ * Note to ARM HW designers: Add real trap support like SH && PPC to
+ * make our lives much much simpler. :)
+ */
+#define BREAK_INSTR_SIZE 4
+#define GDB_BREAKINST 0xef9f0001
+#define KGDB_BREAKINST 0xe7ffdefe
+#define KGDB_COMPILED_BREAK 0xe7ffdeff
+#define CACHE_FLUSH_IS_SAFE 1
+
+#ifndef __ASSEMBLY__
+
+static inline void arch_kgdb_breakpoint(void)
+{
+ asm(".word 0xe7ffdeff");
+}
+
+extern void kgdb_handle_bus_error(void);
+extern int kgdb_fault_expected;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * From Kevin Hilman:
+ *
+ * gdb is expecting the following registers layout.
+ *
+ * r0-r15: 1 long word each
+ * f0-f7: unused, 3 long words each !!
+ * fps: unused, 1 long word
+ * cpsr: 1 long word
+ *
+ * Even though f0-f7 and fps are not used, they need to be
+ * present in the registers sent for correct processing in
+ * the host-side gdb.
+ *
+ * In particular, it is crucial that CPSR is in the right place,
+ * otherwise gdb will not be able to correctly interpret stepping over
+ * conditional branches.
+ */
+#define _GP_REGS 16
+#define _FP_REGS 8
+#define _EXTRA_REGS 2
+#define GDB_MAX_REGS (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS)
+
+#define KGDB_MAX_NO_CPUS 1
+#define BUFMAX 400
+#define NUMREGBYTES (GDB_MAX_REGS << 2)
+#define NUMCRITREGBYTES (32 << 2)
+
+#define _R0 0
+#define _R1 1
+#define _R2 2
+#define _R3 3
+#define _R4 4
+#define _R5 5
+#define _R6 6
+#define _R7 7
+#define _R8 8
+#define _R9 9
+#define _R10 10
+#define _FP 11
+#define _IP 12
+#define _SPT 13
+#define _LR 14
+#define _PC 15
+#define _CPSR (GDB_MAX_REGS - 1)
+
+/*
+ * So that we can denote the end of a frame for tracing,
+ * in the simple case:
+ */
+#define CFI_END_FRAME(func) __CFI_END_FRAME(_PC, _SPT, func)
+
+#endif /* __ASM_KGDB_H__ */
diff --git a/include/asm-arm/traps.h b/include/asm-arm/traps.h
index f1541af..aa399ae 100644
--- a/include/asm-arm/traps.h
+++ b/include/asm-arm/traps.h
@@ -24,4 +24,6 @@ static inline int in_exception_text(unsigned long ptr)
ptr < (unsigned long)&__exception_text_end;
}
+extern void __init early_trap_init(void);
+
#endif
--
1.5.5.1
This patch removes the old kgdb reminants from ARCH=powerpc and
implements the new style arch specific stub for the common kgdb core
interface.
It is possible to have xmon and kgdb in the same kernel, but you
cannot use both at the same time because there is only one set of
debug hooks.
The arch specific kgdb implementation saves the previous state of the
debug hooks and restores them if you unconfigure the kgdb I/O driver.
Kgdb should have no impact on a kernel that has no kgdb I/O driver
configured.
Signed-off-by: Jason Wessel <[email protected]>
---
arch/powerpc/Kconfig | 1 +
arch/powerpc/Kconfig.debug | 50 +----
arch/powerpc/kernel/Makefile | 1 +
arch/powerpc/kernel/kgdb.c | 410 +++++++++++++++++++++++++++++++
arch/powerpc/kernel/setup_32.c | 16 --
arch/powerpc/platforms/powermac/setup.c | 6 -
include/asm-powerpc/kgdb.h | 92 ++++----
7 files changed, 468 insertions(+), 108 deletions(-)
create mode 100644 arch/powerpc/kernel/kgdb.c
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4c22242..737ebf9 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -112,6 +112,7 @@ config PPC
select HAVE_FTRACE
select HAVE_IDE
select HAVE_KPROBES
+ select HAVE_ARCH_KGDB
select HAVE_KRETPROBES
select HAVE_LMB
select HAVE_DMA_ATTRS if PPC64
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 2840ab6..8c8aadb 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -41,22 +41,6 @@ config HCALL_STATS
This option will add a small amount of overhead to all hypervisor
calls.
-config DEBUGGER
- bool "Enable debugger hooks"
- depends on DEBUG_KERNEL
- help
- Include in-kernel hooks for kernel debuggers. Unless you are
- intending to debug the kernel, say N here.
-
-config KGDB
- bool "Include kgdb kernel debugger"
- depends on DEBUGGER && (BROKEN || PPC_GEN550 || 4xx)
- select DEBUG_INFO
- help
- Include in-kernel hooks for kgdb, the Linux kernel source level
- debugger. See <http://kgdb.sourceforge.net/> for more information.
- Unless you are intending to debug the kernel, say N here.
-
config CODE_PATCHING_SELFTEST
bool "Run self-tests of the code-patching code."
depends on DEBUG_KERNEL
@@ -67,36 +51,9 @@ config FTR_FIXUP_SELFTEST
depends on DEBUG_KERNEL
default n
-choice
- prompt "Serial Port"
- depends on KGDB
- default KGDB_TTYS1
-
-config KGDB_TTYS0
- bool "ttyS0"
-
-config KGDB_TTYS1
- bool "ttyS1"
-
-config KGDB_TTYS2
- bool "ttyS2"
-
-config KGDB_TTYS3
- bool "ttyS3"
-
-endchoice
-
-config KGDB_CONSOLE
- bool "Enable serial console thru kgdb port"
- depends on KGDB && 8xx || CPM2
- help
- If you enable this, all serial console messages will be sent
- over the gdb stub.
- If unsure, say N.
-
config XMON
bool "Include xmon kernel debugger"
- depends on DEBUGGER
+ depends on DEBUG_KERNEL
help
Include in-kernel hooks for the xmon kernel monitor/debugger.
Unless you are intending to debug the kernel, say N here.
@@ -126,6 +83,11 @@ config XMON_DISASSEMBLY
to say Y here, unless you're building for a memory-constrained
system.
+config DEBUGGER
+ bool
+ depends on KGDB || XMON
+ default y
+
config IRQSTACKS
bool "Use separate kernel stacks when processing interrupts"
help
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index bf0b1fd..1a40947 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -74,6 +74,7 @@ obj-y += time.o prom.o traps.o setup-common.o \
misc_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC32) += entry_32.o setup_32.o
obj-$(CONFIG_PPC64) += dma_64.o iommu.o
+obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
new file mode 100644
index 0000000..b4fdf2f
--- /dev/null
+++ b/arch/powerpc/kernel/kgdb.c
@@ -0,0 +1,410 @@
+/*
+ * PowerPC backend to the KGDB stub.
+ *
+ * 1998 (c) Michael AK Tesch ([email protected])
+ * Copyright (C) 2003 Timesys Corporation.
+ * Copyright (C) 2004-2006 MontaVista Software, Inc.
+ * PPC64 Mods (C) 2005 Frank Rowand ([email protected])
+ * PPC32 support restored by Vitaly Wool <[email protected]> and
+ * Sergei Shtylyov <[email protected]>
+ * Copyright (C) 2007-2008 Wind River Systems, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program as licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/kgdb.h>
+#include <linux/smp.h>
+#include <linux/signal.h>
+#include <linux/ptrace.h>
+#include <asm/current.h>
+#include <asm/processor.h>
+#include <asm/machdep.h>
+
+/*
+ * This table contains the mapping between PowerPC hardware trap types, and
+ * signals, which are primarily what GDB understands. GDB and the kernel
+ * don't always agree on values, so we use constants taken from gdb-6.2.
+ */
+static struct hard_trap_info
+{
+ unsigned int tt; /* Trap type code for powerpc */
+ unsigned char signo; /* Signal that we map this trap into */
+} hard_trap_info[] = {
+ { 0x0100, 0x02 /* SIGINT */ }, /* system reset */
+ { 0x0200, 0x0b /* SIGSEGV */ }, /* machine check */
+ { 0x0300, 0x0b /* SIGSEGV */ }, /* data access */
+ { 0x0400, 0x0b /* SIGSEGV */ }, /* instruction access */
+ { 0x0500, 0x02 /* SIGINT */ }, /* external interrupt */
+ { 0x0600, 0x0a /* SIGBUS */ }, /* alignment */
+ { 0x0700, 0x05 /* SIGTRAP */ }, /* program check */
+ { 0x0800, 0x08 /* SIGFPE */ }, /* fp unavailable */
+ { 0x0900, 0x0e /* SIGALRM */ }, /* decrementer */
+ { 0x0c00, 0x14 /* SIGCHLD */ }, /* system call */
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+ { 0x2002, 0x05 /* SIGTRAP */ }, /* debug */
+#if defined(CONFIG_FSL_BOOKE)
+ { 0x2010, 0x08 /* SIGFPE */ }, /* spe unavailable */
+ { 0x2020, 0x08 /* SIGFPE */ }, /* spe unavailable */
+ { 0x2030, 0x08 /* SIGFPE */ }, /* spe fp data */
+ { 0x2040, 0x08 /* SIGFPE */ }, /* spe fp data */
+ { 0x2050, 0x08 /* SIGFPE */ }, /* spe fp round */
+ { 0x2060, 0x0e /* SIGILL */ }, /* performace monitor */
+ { 0x2900, 0x08 /* SIGFPE */ }, /* apu unavailable */
+ { 0x3100, 0x0e /* SIGALRM */ }, /* fixed interval timer */
+ { 0x3200, 0x02 /* SIGINT */ }, /* watchdog */
+#else /* ! CONFIG_FSL_BOOKE */
+ { 0x1000, 0x0e /* SIGALRM */ }, /* prog interval timer */
+ { 0x1010, 0x0e /* SIGALRM */ }, /* fixed interval timer */
+ { 0x1020, 0x02 /* SIGINT */ }, /* watchdog */
+ { 0x2010, 0x08 /* SIGFPE */ }, /* fp unavailable */
+ { 0x2020, 0x08 /* SIGFPE */ }, /* ap unavailable */
+#endif
+#else /* ! (defined(CONFIG_40x) || defined(CONFIG_BOOKE)) */
+ { 0x0d00, 0x05 /* SIGTRAP */ }, /* single-step */
+#if defined(CONFIG_8xx)
+ { 0x1000, 0x04 /* SIGILL */ }, /* software emulation */
+#else /* ! CONFIG_8xx */
+ { 0x0f00, 0x04 /* SIGILL */ }, /* performance monitor */
+ { 0x0f20, 0x08 /* SIGFPE */ }, /* altivec unavailable */
+ { 0x1300, 0x05 /* SIGTRAP */ }, /* instruction address break */
+#if defined(CONFIG_PPC64)
+ { 0x1200, 0x05 /* SIGILL */ }, /* system error */
+ { 0x1500, 0x04 /* SIGILL */ }, /* soft patch */
+ { 0x1600, 0x04 /* SIGILL */ }, /* maintenance */
+ { 0x1700, 0x08 /* SIGFPE */ }, /* altivec assist */
+ { 0x1800, 0x04 /* SIGILL */ }, /* thermal */
+#else /* ! CONFIG_PPC64 */
+ { 0x1400, 0x02 /* SIGINT */ }, /* SMI */
+ { 0x1600, 0x08 /* SIGFPE */ }, /* altivec assist */
+ { 0x1700, 0x04 /* SIGILL */ }, /* TAU */
+ { 0x2000, 0x05 /* SIGTRAP */ }, /* run mode */
+#endif
+#endif
+#endif
+ { 0x0000, 0x00 } /* Must be last */
+};
+
+static int computeSignal(unsigned int tt)
+{
+ struct hard_trap_info *ht;
+
+ for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+ if (ht->tt == tt)
+ return ht->signo;
+
+ return SIGHUP; /* default for things we don't know about */
+}
+
+static int kgdb_call_nmi_hook(struct pt_regs *regs)
+{
+ kgdb_nmicallback(raw_smp_processor_id(), regs);
+ return 0;
+}
+
+#ifdef CONFIG_SMP
+void kgdb_roundup_cpus(unsigned long flags)
+{
+ smp_send_debugger_break(MSG_ALL_BUT_SELF);
+}
+#endif
+
+/* KGDB functions to use existing PowerPC64 hooks. */
+static int kgdb_debugger(struct pt_regs *regs)
+{
+ return kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs);
+}
+
+static int kgdb_handle_breakpoint(struct pt_regs *regs)
+{
+ if (user_mode(regs))
+ return 0;
+
+ if (kgdb_handle_exception(0, SIGTRAP, 0, regs) != 0)
+ return 0;
+
+ if (*(u32 *) (regs->nip) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr))
+ regs->nip += 4;
+
+ return 1;
+}
+
+static int kgdb_singlestep(struct pt_regs *regs)
+{
+ struct thread_info *thread_info, *exception_thread_info;
+
+ if (user_mode(regs))
+ return 0;
+
+ /*
+ * On Book E and perhaps other processsors, singlestep is handled on
+ * the critical exception stack. This causes current_thread_info()
+ * to fail, since it it locates the thread_info by masking off
+ * the low bits of the current stack pointer. We work around
+ * this issue by copying the thread_info from the kernel stack
+ * before calling kgdb_handle_exception, and copying it back
+ * afterwards. On most processors the copy is avoided since
+ * exception_thread_info == thread_info.
+ */
+ thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1));
+ exception_thread_info = current_thread_info();
+
+ if (thread_info != exception_thread_info)
+ memcpy(exception_thread_info, thread_info, sizeof *thread_info);
+
+ kgdb_handle_exception(0, SIGTRAP, 0, regs);
+
+ if (thread_info != exception_thread_info)
+ memcpy(thread_info, exception_thread_info, sizeof *thread_info);
+
+ return 1;
+}
+
+static int kgdb_iabr_match(struct pt_regs *regs)
+{
+ if (user_mode(regs))
+ return 0;
+
+ if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0)
+ return 0;
+ return 1;
+}
+
+static int kgdb_dabr_match(struct pt_regs *regs)
+{
+ if (user_mode(regs))
+ return 0;
+
+ if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0)
+ return 0;
+ return 1;
+}
+
+#define PACK64(ptr, src) do { *(ptr++) = (src); } while (0)
+
+#define PACK32(ptr, src) do { \
+ u32 *ptr32; \
+ ptr32 = (u32 *)ptr; \
+ *(ptr32++) = (src); \
+ ptr = (unsigned long *)ptr32; \
+ } while (0)
+
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ unsigned long *ptr = gdb_regs;
+ int reg;
+
+ memset(gdb_regs, 0, NUMREGBYTES);
+
+ for (reg = 0; reg < 32; reg++)
+ PACK64(ptr, regs->gpr[reg]);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+ for (reg = 0; reg < 32; reg++)
+ PACK64(ptr, current->thread.evr[reg]);
+#else
+ ptr += 32;
+#endif
+#else
+ /* fp registers not used by kernel, leave zero */
+ ptr += 32 * 8 / sizeof(long);
+#endif
+
+ PACK64(ptr, regs->nip);
+ PACK64(ptr, regs->msr);
+ PACK32(ptr, regs->ccr);
+ PACK64(ptr, regs->link);
+ PACK64(ptr, regs->ctr);
+ PACK32(ptr, regs->xer);
+
+ BUG_ON((unsigned long)ptr >
+ (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+ struct pt_regs *regs = (struct pt_regs *)(p->thread.ksp +
+ STACK_FRAME_OVERHEAD);
+ unsigned long *ptr = gdb_regs;
+ int reg;
+
+ memset(gdb_regs, 0, NUMREGBYTES);
+
+ /* Regs GPR0-2 */
+ for (reg = 0; reg < 3; reg++)
+ PACK64(ptr, regs->gpr[reg]);
+
+ /* Regs GPR3-13 are caller saved, not in regs->gpr[] */
+ ptr += 11;
+
+ /* Regs GPR14-31 */
+ for (reg = 14; reg < 32; reg++)
+ PACK64(ptr, regs->gpr[reg]);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+ for (reg = 0; reg < 32; reg++)
+ PACK64(ptr, p->thread.evr[reg]);
+#else
+ ptr += 32;
+#endif
+#else
+ /* fp registers not used by kernel, leave zero */
+ ptr += 32 * 8 / sizeof(long);
+#endif
+
+ PACK64(ptr, regs->nip);
+ PACK64(ptr, regs->msr);
+ PACK32(ptr, regs->ccr);
+ PACK64(ptr, regs->link);
+ PACK64(ptr, regs->ctr);
+ PACK32(ptr, regs->xer);
+
+ BUG_ON((unsigned long)ptr >
+ (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+#define UNPACK64(dest, ptr) do { dest = *(ptr++); } while (0)
+
+#define UNPACK32(dest, ptr) do { \
+ u32 *ptr32; \
+ ptr32 = (u32 *)ptr; \
+ dest = *(ptr32++); \
+ ptr = (unsigned long *)ptr32; \
+ } while (0)
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ unsigned long *ptr = gdb_regs;
+ int reg;
+#ifdef CONFIG_SPE
+ union {
+ u32 v32[2];
+ u64 v64;
+ } acc;
+#endif
+
+ for (reg = 0; reg < 32; reg++)
+ UNPACK64(regs->gpr[reg], ptr);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+ for (reg = 0; reg < 32; reg++)
+ UNPACK64(current->thread.evr[reg], ptr);
+#else
+ ptr += 32;
+#endif
+#else
+ /* fp registers not used by kernel, leave zero */
+ ptr += 32 * 8 / sizeof(int);
+#endif
+
+ UNPACK64(regs->nip, ptr);
+ UNPACK64(regs->msr, ptr);
+ UNPACK32(regs->ccr, ptr);
+ UNPACK64(regs->link, ptr);
+ UNPACK64(regs->ctr, ptr);
+ UNPACK32(regs->xer, ptr);
+
+ BUG_ON((unsigned long)ptr >
+ (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+/*
+ * This function does PowerPC specific procesing for interfacing to gdb.
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+ char *remcom_in_buffer, char *remcom_out_buffer,
+ struct pt_regs *linux_regs)
+{
+ char *ptr = &remcom_in_buffer[1];
+ unsigned long addr;
+
+ switch (remcom_in_buffer[0]) {
+ /*
+ * sAA..AA Step one instruction from AA..AA
+ * This will return an error to gdb ..
+ */
+ case 's':
+ case 'c':
+ /* handle the optional parameter */
+ if (kgdb_hex2long(&ptr, &addr))
+ linux_regs->nip = addr;
+
+ atomic_set(&kgdb_cpu_doing_single_step, -1);
+ /* set the trace bit if we're stepping */
+ if (remcom_in_buffer[0] == 's') {
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+ mtspr(SPRN_DBCR0,
+ mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+ linux_regs->msr |= MSR_DE;
+#else
+ linux_regs->msr |= MSR_SE;
+#endif
+ kgdb_single_step = 1;
+ if (kgdb_contthread)
+ atomic_set(&kgdb_cpu_doing_single_step,
+ raw_smp_processor_id());
+ }
+ return 0;
+ }
+
+ return -1;
+}
+
+/*
+ * Global data
+ */
+struct kgdb_arch arch_kgdb_ops = {
+ .gdb_bpt_instr = {0x7d, 0x82, 0x10, 0x08},
+};
+
+static int kgdb_not_implemented(struct pt_regs *regs)
+{
+ return 0;
+}
+
+static void *old__debugger_ipi;
+static void *old__debugger;
+static void *old__debugger_bpt;
+static void *old__debugger_sstep;
+static void *old__debugger_iabr_match;
+static void *old__debugger_dabr_match;
+static void *old__debugger_fault_handler;
+
+int kgdb_arch_init(void)
+{
+ old__debugger_ipi = __debugger_ipi;
+ old__debugger = __debugger;
+ old__debugger_bpt = __debugger_bpt;
+ old__debugger_sstep = __debugger_sstep;
+ old__debugger_iabr_match = __debugger_iabr_match;
+ old__debugger_dabr_match = __debugger_dabr_match;
+ old__debugger_fault_handler = __debugger_fault_handler;
+
+ __debugger_ipi = kgdb_call_nmi_hook;
+ __debugger = kgdb_debugger;
+ __debugger_bpt = kgdb_handle_breakpoint;
+ __debugger_sstep = kgdb_singlestep;
+ __debugger_iabr_match = kgdb_iabr_match;
+ __debugger_dabr_match = kgdb_dabr_match;
+ __debugger_fault_handler = kgdb_not_implemented;
+
+ return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+ __debugger_ipi = old__debugger_ipi;
+ __debugger = old__debugger;
+ __debugger_bpt = old__debugger_bpt;
+ __debugger_sstep = old__debugger_sstep;
+ __debugger_iabr_match = old__debugger_iabr_match;
+ __debugger_dabr_match = old__debugger_dabr_match;
+ __debugger_fault_handler = old__debugger_fault_handler;
+}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 4efebe8..066e65c 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -43,10 +43,6 @@
#define DBG(fmt...)
-#if defined CONFIG_KGDB
-#include <asm/kgdb.h>
-#endif
-
extern void bootx_init(unsigned long r4, unsigned long phys);
int boot_cpuid;
@@ -302,18 +298,6 @@ void __init setup_arch(char **cmdline_p)
xmon_setup();
-#if defined(CONFIG_KGDB)
- if (ppc_md.kgdb_map_scc)
- ppc_md.kgdb_map_scc();
- set_debug_traps();
- if (strstr(cmd_line, "gdb")) {
- if (ppc_md.progress)
- ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
- printk("kgdb breakpoint activated\n");
- breakpoint();
- }
-#endif
-
/*
* Set cache line size based on type of cpu as a default.
* Systems with OF can look in the properties on the cpu node(s)
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 00bd016..3163544 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -97,8 +97,6 @@ extern struct machdep_calls pmac_md;
int sccdbg;
#endif
-extern void zs_kgdb_hook(int tty_num);
-
sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN;
EXPORT_SYMBOL(sys_ctrler);
@@ -329,10 +327,6 @@ static void __init pmac_setup_arch(void)
l2cr_init();
#endif /* CONFIG_PPC32 */
-#ifdef CONFIG_KGDB
- zs_kgdb_hook(0);
-#endif
-
find_via_cuda();
find_via_pmu();
smu_init();
diff --git a/include/asm-powerpc/kgdb.h b/include/asm-powerpc/kgdb.h
index b617dac..1399caf 100644
--- a/include/asm-powerpc/kgdb.h
+++ b/include/asm-powerpc/kgdb.h
@@ -1,57 +1,65 @@
/*
- * kgdb.h: Defines and declarations for serial line source level
- * remote debugging of the Linux kernel using gdb.
+ * include/asm-powerpc/kgdb.h
*
+ * The PowerPC (32/64) specific defines / externs for KGDB. Based on
+ * the previous 32bit and 64bit specific files, which had the following
+ * copyrights:
+ *
+ * PPC64 Mods (C) 2005 Frank Rowand ([email protected])
+ * PPC Mods (C) 2004 Tom Rini ([email protected])
+ * PPC Mods (C) 2003 John Whitney ([email protected])
* PPC Mods (C) 1998 Michael Tesch ([email protected])
*
+ *
* Copyright (C) 1995 David S. Miller ([email protected])
+ * Author: Tom Rini <[email protected]>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
*/
#ifdef __KERNEL__
-#ifndef _PPC_KGDB_H
-#define _PPC_KGDB_H
+#ifndef __POWERPC_KGDB_H__
+#define __POWERPC_KGDB_H__
#ifndef __ASSEMBLY__
-/* Things specific to the gen550 backend. */
-struct uart_port;
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_kgdb_map_scc(void);
-extern void gen550_init(int, struct uart_port *);
-
-/* Things specific to the pmac backend. */
-extern void zs_kgdb_hook(int tty_num);
-
-/* To init the kgdb engine. (called by serial hook)*/
-extern void set_debug_traps(void);
-
-/* To enter the debugger explicitly. */
-extern void breakpoint(void);
-
-/* For taking exceptions
- * these are defined in traps.c
- */
-extern int (*debugger)(struct pt_regs *regs);
-extern int (*debugger_bpt)(struct pt_regs *regs);
-extern int (*debugger_sstep)(struct pt_regs *regs);
-extern int (*debugger_iabr_match)(struct pt_regs *regs);
-extern int (*debugger_dabr_match)(struct pt_regs *regs);
-extern void (*debugger_fault_handler)(struct pt_regs *regs);
-
-/* What we bring to the party */
-int kgdb_bpt(struct pt_regs *regs);
-int kgdb_sstep(struct pt_regs *regs);
-void kgdb(struct pt_regs *regs);
-int kgdb_iabr_match(struct pt_regs *regs);
-int kgdb_dabr_match(struct pt_regs *regs);
+#define BREAK_INSTR_SIZE 4
+#define BUFMAX ((NUMREGBYTES * 2) + 512)
+#define OUTBUFMAX ((NUMREGBYTES * 2) + 512)
+static inline void arch_kgdb_breakpoint(void)
+{
+ asm(".long 0x7d821008"); /* twge r2, r2 */
+}
+#define CACHE_FLUSH_IS_SAFE 1
+/* The number bytes of registers we have to save depends on a few
+ * things. For 64bit we default to not including vector registers and
+ * vector state registers. */
+#ifdef CONFIG_PPC64
/*
- * external low-level support routines (ie macserial.c)
+ * 64 bit (8 byte) registers:
+ * 32 gpr, 32 fpr, nip, msr, link, ctr
+ * 32 bit (4 byte) registers:
+ * ccr, xer, fpscr
*/
-extern void kgdb_interruptible(int); /* control interrupts from serial */
-extern void putDebugChar(char); /* write a single character */
-extern char getDebugChar(void); /* read and return a single char */
-
+#define NUMREGBYTES ((68 * 8) + (3 * 4))
+#define NUMCRITREGBYTES 184
+#else /* CONFIG_PPC32 */
+/* On non-E500 family PPC32 we determine the size by picking the last
+ * register we need, but on E500 we skip sections so we list what we
+ * need to store, and add it up. */
+#ifndef CONFIG_E500
+#define MAXREG (PT_FPSCR+1)
+#else
+/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/
+#define MAXREG ((32*2)+6+2+1)
+#endif
+#define NUMREGBYTES (MAXREG * sizeof(int))
+/* CR/LR, R1, R2, R13-R31 inclusive. */
+#define NUMCRITREGBYTES (23 * sizeof(int))
+#endif /* 32/64 */
#endif /* !(__ASSEMBLY__) */
-#endif /* !(_PPC_KGDB_H) */
+#endif /* !__POWERPC_KGDB_H__ */
#endif /* __KERNEL__ */
--
1.5.5.1
Add in console polling hooks for the cpm uart for use with kgdb and
kgdboc.
Signed-off-by: Jason Wessel <[email protected]>
CC: [email protected]
---
drivers/serial/cpm_uart/cpm_uart_core.c | 95 ++++++++++++++++++++++++++++++-
1 files changed, 94 insertions(+), 1 deletions(-)
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 93e407e..1ff80de 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -201,6 +201,10 @@ static void cpm_uart_int_tx(struct uart_port *port)
cpm_uart_tx_pump(port);
}
+#ifdef CONFIG_CONSOLE_POLL
+static int serial_polled;
+#endif
+
/*
* Receive characters
*/
@@ -222,6 +226,12 @@ static void cpm_uart_int_rx(struct uart_port *port)
*/
bdp = pinfo->rx_cur;
for (;;) {
+#ifdef CONFIG_CONSOLE_POLL
+ if (unlikely(serial_polled)) {
+ serial_polled = 0;
+ return;
+ }
+#endif
/* get status */
status = in_be16(&bdp->cbd_sc);
/* If this one is empty, return happy */
@@ -253,7 +263,12 @@ static void cpm_uart_int_rx(struct uart_port *port)
goto handle_error;
if (uart_handle_sysrq_char(port, ch))
continue;
-
+#ifdef CONFIG_CONSOLE_POLL
+ if (unlikely(serial_polled)) {
+ serial_polled = 0;
+ return;
+ }
+#endif
error_return:
tty_insert_flip_char(tty, ch, flg);
@@ -865,6 +880,80 @@ static void cpm_uart_config_port(struct uart_port *port, int flags)
cpm_uart_request_port(port);
}
}
+
+#ifdef CONFIG_CONSOLE_POLL
+/* Serial polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+#define GDB_BUF_SIZE 512 /* power of 2, please */
+
+static char poll_buf[GDB_BUF_SIZE];
+static char *pollp;
+static int poll_chars;
+
+static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo)
+{
+ u_char c, *cp;
+ volatile cbd_t *bdp;
+ int i;
+
+ /* Get the address of the host memory buffer.
+ */
+ bdp = pinfo->rx_cur;
+ while (bdp->cbd_sc & BD_SC_EMPTY)
+ ;
+
+ /* If the buffer address is in the CPM DPRAM, don't
+ * convert it.
+ */
+ cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
+
+ if (obuf) {
+ i = c = bdp->cbd_datlen;
+ while (i-- > 0)
+ *obuf++ = *cp++;
+ } else
+ c = *cp;
+ bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID);
+ bdp->cbd_sc |= BD_SC_EMPTY;
+
+ if (bdp->cbd_sc & BD_SC_WRAP)
+ bdp = pinfo->rx_bd_base;
+ else
+ bdp++;
+ pinfo->rx_cur = (cbd_t *)bdp;
+
+ return (int)c;
+}
+
+static int cpm_get_poll_char(struct uart_port *port)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+
+ if (!serial_polled) {
+ serial_polled = 1;
+ poll_chars = 0;
+ }
+ if (poll_chars <= 0) {
+ poll_chars = poll_wait_key(poll_buf, pinfo);
+ pollp = poll_buf;
+ }
+ poll_chars--;
+ return *pollp++;
+}
+
+static void cpm_put_poll_char(struct uart_port *port,
+ unsigned char c)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ static char ch[2];
+
+ ch[0] = (char)c;
+ cpm_uart_early_write(pinfo->port.line, ch, 1);
+}
+#endif /* CONFIG_CONSOLE_POLL */
+
static struct uart_ops cpm_uart_pops = {
.tx_empty = cpm_uart_tx_empty,
.set_mctrl = cpm_uart_set_mctrl,
@@ -882,6 +971,10 @@ static struct uart_ops cpm_uart_pops = {
.request_port = cpm_uart_request_port,
.config_port = cpm_uart_config_port,
.verify_port = cpm_uart_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = cpm_get_poll_char,
+ .poll_put_char = cpm_put_poll_char,
+#endif
};
struct uart_cpm_port cpm_uart_ports[UART_NR];
--
1.5.5.1
Add in console polling hooks for the mpsc uart for use with kgdb and
kgdboc.
Signed-off-by: Jason Wessel <[email protected]>
---
drivers/serial/mpsc.c | 148 ++++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 147 insertions(+), 1 deletions(-)
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index c9f53e7..61d3ade 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -921,6 +921,10 @@ static int mpsc_make_ready(struct mpsc_port_info *pi)
return 0;
}
+#ifdef CONFIG_CONSOLE_POLL
+static int serial_polled;
+#endif
+
/*
******************************************************************************
*
@@ -956,7 +960,12 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi)
while (!((cmdstat = be32_to_cpu(rxre->cmdstat))
& SDMA_DESC_CMDSTAT_O)) {
bytes_in = be16_to_cpu(rxre->bytecnt);
-
+#ifdef CONFIG_CONSOLE_POLL
+ if (unlikely(serial_polled)) {
+ serial_polled = 0;
+ return 0;
+ }
+#endif
/* Following use of tty struct directly is deprecated */
if (unlikely(tty_buffer_request_room(tty, bytes_in)
< bytes_in)) {
@@ -1017,6 +1026,12 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi)
if (uart_handle_sysrq_char(&pi->port, *bp)) {
bp++;
bytes_in--;
+#ifdef CONFIG_CONSOLE_POLL
+ if (unlikely(serial_polled)) {
+ serial_polled = 0;
+ return 0;
+ }
+#endif
goto next_frame;
}
@@ -1519,6 +1534,133 @@ static int mpsc_verify_port(struct uart_port *port, struct serial_struct *ser)
return rc;
}
+#ifdef CONFIG_CONSOLE_POLL
+/* Serial polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static char poll_buf[2048];
+static int poll_ptr;
+static int poll_cnt;
+static void mpsc_put_poll_char(struct uart_port *port,
+ unsigned char c);
+
+static int mpsc_get_poll_char(struct uart_port *port)
+{
+ struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+ struct mpsc_rx_desc *rxre;
+ u32 cmdstat, bytes_in, i;
+ u8 *bp;
+
+ if (!serial_polled)
+ serial_polled = 1;
+
+ pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line);
+
+ if (poll_cnt) {
+ poll_cnt--;
+ return poll_buf[poll_ptr++];
+ }
+ poll_ptr = 0;
+ poll_cnt = 0;
+
+ while (poll_cnt == 0) {
+ rxre = (struct mpsc_rx_desc *)(pi->rxr +
+ (pi->rxr_posn*MPSC_RXRE_SIZE));
+ dma_cache_sync(pi->port.dev, (void *)rxre,
+ MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ invalidate_dcache_range((ulong)rxre,
+ (ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+ /*
+ * Loop through Rx descriptors handling ones that have
+ * been completed.
+ */
+ while (poll_cnt == 0 &&
+ !((cmdstat = be32_to_cpu(rxre->cmdstat)) &
+ SDMA_DESC_CMDSTAT_O)){
+ bytes_in = be16_to_cpu(rxre->bytecnt);
+ bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE);
+ dma_cache_sync(pi->port.dev, (void *) bp,
+ MPSC_RXBE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ invalidate_dcache_range((ulong)bp,
+ (ulong)bp + MPSC_RXBE_SIZE);
+#endif
+ if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
+ SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) &&
+ !(cmdstat & pi->port.ignore_status_mask)) {
+ poll_buf[poll_cnt] = *bp;
+ poll_cnt++;
+ } else {
+ for (i = 0; i < bytes_in; i++) {
+ poll_buf[poll_cnt] = *bp++;
+ poll_cnt++;
+ }
+ pi->port.icount.rx += bytes_in;
+ }
+ rxre->bytecnt = cpu_to_be16(0);
+ wmb();
+ rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
+ SDMA_DESC_CMDSTAT_EI |
+ SDMA_DESC_CMDSTAT_F |
+ SDMA_DESC_CMDSTAT_L);
+ wmb();
+ dma_cache_sync(pi->port.dev, (void *)rxre,
+ MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ flush_dcache_range((ulong)rxre,
+ (ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+
+ /* Advance to next descriptor */
+ pi->rxr_posn = (pi->rxr_posn + 1) &
+ (MPSC_RXR_ENTRIES - 1);
+ rxre = (struct mpsc_rx_desc *)(pi->rxr +
+ (pi->rxr_posn * MPSC_RXRE_SIZE));
+ dma_cache_sync(pi->port.dev, (void *)rxre,
+ MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ invalidate_dcache_range((ulong)rxre,
+ (ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+ }
+
+ /* Restart rx engine, if its stopped */
+ if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0)
+ mpsc_start_rx(pi);
+ }
+ if (poll_cnt) {
+ poll_cnt--;
+ return poll_buf[poll_ptr++];
+ }
+
+ return 0;
+}
+
+
+static void mpsc_put_poll_char(struct uart_port *port,
+ unsigned char c)
+{
+ struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+ u32 data;
+
+ data = readl(pi->mpsc_base + MPSC_MPCR);
+ writeb(c, pi->mpsc_base + MPSC_CHR_1);
+ mb();
+ data = readl(pi->mpsc_base + MPSC_CHR_2);
+ data |= MPSC_CHR_2_TTCS;
+ writel(data, pi->mpsc_base + MPSC_CHR_2);
+ mb();
+
+ while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_TTCS);
+}
+#endif
static struct uart_ops mpsc_pops = {
.tx_empty = mpsc_tx_empty,
@@ -1537,6 +1679,10 @@ static struct uart_ops mpsc_pops = {
.request_port = mpsc_request_port,
.config_port = mpsc_config_port,
.verify_port = mpsc_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = mpsc_get_poll_char,
+ .poll_put_char = mpsc_put_poll_char,
+#endif
};
/*
--
1.5.5.1