This set of patches remove Kconfig and code related to CONFIG_PPC_MERGE
and !CONFIG_PPC_MERGE. There is some discussion about that one last
use of !PPC_MERGE with respect to the 4xx MTD_NAND_NDFC driver.
Paul, is this something you'd be willing to entertain for 2.6.27?
- k
Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore remove
the dead code associated with !CONFIG_PPC_MERGE out of arch/powerpc
and include/asm-powerpc.
Signed-off-by: Kumar Gala <[email protected]>
---
arch/powerpc/Kconfig.debug | 2 +-
arch/powerpc/kernel/Makefile | 14 --
arch/powerpc/kernel/cpu_setup_44x.S | 6 -
arch/powerpc/kernel/irq.c | 25 +---
arch/powerpc/kernel/process.c | 2 -
arch/powerpc/kernel/vdso.c | 2 -
arch/powerpc/lib/Makefile | 2 -
arch/powerpc/platforms/52xx/Makefile | 4 +-
arch/powerpc/platforms/Makefile | 6 -
arch/powerpc/platforms/powermac/Makefile | 3 +-
arch/powerpc/sysdev/Makefile | 2 -
include/asm-powerpc/dcr.h | 6 +-
include/asm-powerpc/i8259.h | 5 -
include/asm-powerpc/ipic.h | 7 -
include/asm-powerpc/irq.h | 288 ------------------------------
15 files changed, 6 insertions(+), 368 deletions(-)
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 8c8aadb..4ebc52a 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -97,7 +97,7 @@ config IRQSTACKS
config VIRQ_DEBUG
bool "Expose hardware/virtual IRQ mapping via debugfs"
- depends on DEBUG_FS && PPC_MERGE
+ depends on DEBUG_FS
help
This option will show the mapping relationship between hardware irq
numbers and virtual irq numbers. The mapping is exposed via debugfs
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 1a40947..64f5948 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -59,8 +59,6 @@ obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o
obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_44x) += cpu_setup_44x.o
-ifeq ($(CONFIG_PPC_MERGE),y)
-
extra-$(CONFIG_PPC_STD_MMU) := head_32.o
extra-$(CONFIG_PPC64) := head_64.o
extra-$(CONFIG_40x) := head_40x.o
@@ -100,12 +98,6 @@ ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
obj-y += iomap.o
endif
-else
-# stuff used from here for ARCH=ppc
-smpobj-$(CONFIG_SMP) += smp.o
-
-endif
-
obj-$(CONFIG_PPC64) += $(obj64-y)
extra-$(CONFIG_PPC_FPU) += fpu.o
@@ -121,9 +113,6 @@ PHONY += systbl_chk
systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
$(call cmd,systbl_chk)
-
-ifeq ($(CONFIG_PPC_MERGE),y)
-
$(obj)/built-in.o: prom_init_check
quiet_cmd_prom_init_check = CALL $<
@@ -133,7 +122,4 @@ PHONY += prom_init_check
prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
$(call cmd,prom_init_check)
-endif
-
-
clean-files := vmlinux.lds
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S
index 5465e8d..80cac98 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -39,12 +39,6 @@ _GLOBAL(__setup_cpu_440gx)
_GLOBAL(__setup_cpu_440spe)
b __fixup_440A_mcheck
- /* Temporary fixup for arch/ppc until we kill the whole thing */
-#ifndef CONFIG_PPC_MERGE
-_GLOBAL(__fixup_440A_mcheck)
- blr
-#endif
-
/* enable APU between CPU and FPU */
_GLOBAL(__init_fpu_44x)
mfspr r3,SPRN_CCR0
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 6ac8612..d972dec 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -77,22 +77,12 @@ static int ppc_spurious_interrupts;
EXPORT_SYMBOL(__irq_offset_value);
atomic_t ppc_n_lost_interrupts;
-#ifndef CONFIG_PPC_MERGE
-#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
-unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-#endif
-
#ifdef CONFIG_TAU_INT
extern int tau_initialized;
extern int tau_interrupts(int);
#endif
#endif /* CONFIG_PPC32 */
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
-extern atomic_t ipi_recv;
-extern atomic_t ipi_sent;
-#endif
-
#ifdef CONFIG_PPC64
EXPORT_SYMBOL(irq_desc);
@@ -216,21 +206,14 @@ int show_interrupts(struct seq_file *p, void *v)
skip:
spin_unlock_irqrestore(&desc->lock, flags);
} else if (i == NR_IRQS) {
-#ifdef CONFIG_PPC32
-#ifdef CONFIG_TAU_INT
+#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT)
if (tau_initialized){
seq_puts(p, "TAU: ");
for_each_online_cpu(j)
seq_printf(p, "%10u ", tau_interrupts(j));
seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n");
}
-#endif
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
- /* should this be per processor send/receive? */
- seq_printf(p, "IPI (recv/sent): %10u/%u\n",
- atomic_read(&ipi_recv), atomic_read(&ipi_sent));
-#endif
-#endif /* CONFIG_PPC32 */
+#endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/
seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
}
return 0;
@@ -454,8 +437,6 @@ void do_softirq(void)
* IRQ controller and virtual interrupts
*/
-#ifdef CONFIG_PPC_MERGE
-
static LIST_HEAD(irq_hosts);
static DEFINE_SPINLOCK(irq_big_lock);
static DEFINE_PER_CPU(unsigned int, irq_radix_reader);
@@ -1114,8 +1095,6 @@ static int __init irq_debugfs_init(void)
__initcall(irq_debugfs_init);
#endif /* CONFIG_VIRQ_DEBUG */
-#endif /* CONFIG_PPC_MERGE */
-
#ifdef CONFIG_PPC64
static int __init setup_noirqdistrib(char *str)
{
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index e030f3b..957bded 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -276,10 +276,8 @@ int set_dabr(unsigned long dabr)
{
__get_cpu_var(current_dabr) = dabr;
-#ifdef CONFIG_PPC_MERGE /* XXX for now */
if (ppc_md.set_dabr)
return ppc_md.set_dabr(dabr);
-#endif
/* XXX should we have a CPU_FTR_HAS_DABR ? */
#if defined(CONFIG_PPC64) || defined(CONFIG_6xx)
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index f177c60..65639a4 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -788,9 +788,7 @@ static int __init vdso_init(void)
return 0;
}
-#ifdef CONFIG_PPC_MERGE
arch_initcall(vdso_init);
-#endif
int in_gate_area_no_task(unsigned long addr)
{
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 2a88e8b..d69912c 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -6,12 +6,10 @@ ifeq ($(CONFIG_PPC64),y)
EXTRA_CFLAGS += -mno-minimal-toc
endif
-ifeq ($(CONFIG_PPC_MERGE),y)
obj-y := string.o alloc.o \
checksum_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o
obj-$(CONFIG_HAS_IOMEM) += devres.o
-endif
obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \
memcpy_64.o usercopy_64.o mem_64.o string.o
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index daf0e15..b8a5206 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -1,10 +1,8 @@
#
# Makefile for 52xx based boards
#
-ifeq ($(CONFIG_PPC_MERGE),y)
obj-y += mpc52xx_pic.o mpc52xx_common.o
obj-$(CONFIG_PCI) += mpc52xx_pci.o
-endif
obj-$(CONFIG_PPC_MPC5200_SIMPLE) += mpc5200_simple.o
obj-$(CONFIG_PPC_EFIKA) += efika.o
@@ -15,4 +13,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y)
obj-$(CONFIG_PM) += lite5200_sleep.o lite5200_pm.o
endif
-obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o
\ No newline at end of file
+obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 423a023..8079e0b 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -1,13 +1,7 @@
obj-$(CONFIG_FSL_ULI1575) += fsl_uli1575.o
-ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_PMAC) += powermac/
-else
-ifeq ($(CONFIG_PPC64),y)
-obj-$(CONFIG_PPC_PMAC) += powermac/
-endif
-endif
obj-$(CONFIG_PPC_CHRP) += chrp/
obj-$(CONFIG_40x) += 40x/
obj-$(CONFIG_44x) += 44x/
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index 8977417..58ecdd7 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -7,7 +7,7 @@ endif
obj-y += pic.o setup.o time.o feature.o pci.o \
sleep.o low_i2c.o cache.o pfunc_core.o \
- pfunc_base.o
+ pfunc_base.o udbg_scc.o udbg_adb.o
obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o
obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o
obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o
@@ -19,4 +19,3 @@ obj-$(CONFIG_NVRAM:m=y) += nvram.o
obj-$(CONFIG_PPC64) += nvram.o
obj-$(CONFIG_PPC32) += bootx_init.o
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_PPC_MERGE) += udbg_scc.o udbg_adb.o
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 16a0ed2..a90054b 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -25,7 +25,6 @@ obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o
obj-$(CONFIG_AXON_RAM) += axonram.o
-ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
obj-$(CONFIG_PPC_I8259) += i8259.o
obj-$(CONFIG_IPIC) += ipic.o
@@ -36,7 +35,6 @@ obj-$(CONFIG_OF_RTC) += of_rtc.o
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_4xx) += ppc4xx_pci.o
endif
-endif
# Temporary hack until we have migrated to asm-powerpc
ifeq ($(ARCH),powerpc)
diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h
index 53b2830..d13fb68 100644
--- a/include/asm-powerpc/dcr.h
+++ b/include/asm-powerpc/dcr.h
@@ -65,17 +65,13 @@ typedef dcr_host_mmio_t dcr_host_t;
#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
/*
- * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR
- * base from the device-tree
+ * additional helpers to read the DCR * base from the device-tree
*/
-#ifdef CONFIG_PPC_MERGE
struct device_node;
extern unsigned int dcr_resource_start(struct device_node *np,
unsigned int index);
extern unsigned int dcr_resource_len(struct device_node *np,
unsigned int index);
-#endif /* CONFIG_PPC_MERGE */
-
#endif /* CONFIG_PPC_DCR */
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/i8259.h b/include/asm-powerpc/i8259.h
index db1362f..105ade2 100644
--- a/include/asm-powerpc/i8259.h
+++ b/include/asm-powerpc/i8259.h
@@ -4,14 +4,9 @@
#include <linux/irq.h>
-#ifdef CONFIG_PPC_MERGE
extern void i8259_init(struct device_node *node, unsigned long intack_addr);
extern unsigned int i8259_irq(void);
extern struct irq_host *i8259_get_host(void);
-#else
-extern void i8259_init(unsigned long intack_addr, int offset);
-extern int i8259_irq(void);
-#endif
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_I8259_H */
diff --git a/include/asm-powerpc/ipic.h b/include/asm-powerpc/ipic.h
index 8ff08be..a90242c 100644
--- a/include/asm-powerpc/ipic.h
+++ b/include/asm-powerpc/ipic.h
@@ -79,15 +79,8 @@ extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq);
extern u32 ipic_get_mcp_status(void);
extern void ipic_clear_mcp_status(u32 mask);
-#ifdef CONFIG_PPC_MERGE
extern struct ipic * ipic_init(struct device_node *node, unsigned int flags);
extern unsigned int ipic_get_irq(void);
-#else
-extern void ipic_init(phys_addr_t phys_addr, unsigned int flags,
- unsigned int irq_offset,
- unsigned char *senses, unsigned int senses_count);
-extern int ipic_get_irq(void);
-#endif
#endif /* __ASM_IPIC_H__ */
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h
index 1ef8e30..a372f76 100644
--- a/include/asm-powerpc/irq.h
+++ b/include/asm-powerpc/irq.h
@@ -25,8 +25,6 @@
extern atomic_t ppc_n_lost_interrupts;
-#ifdef CONFIG_PPC_MERGE
-
/* This number is used when no interrupt has been assigned */
#define NO_IRQ (0)
@@ -326,292 +324,6 @@ static __inline__ int irq_canonicalize(int irq)
return irq;
}
-
-#else /* CONFIG_PPC_MERGE */
-
-/* This number is used when no interrupt has been assigned */
-#define NO_IRQ (-1)
-#define NO_IRQ_IGNORE (-2)
-
-
-/*
- * These constants are used for passing information about interrupt
- * signal polarity and level/edge sensing to the low-level PIC chip
- * drivers.
- */
-#define IRQ_SENSE_MASK 0x1
-#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */
-#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */
-
-#define IRQ_POLARITY_MASK 0x2
-#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */
-#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */
-
-
-#if defined(CONFIG_40x)
-#include <asm/ibm4xx.h>
-
-#ifndef NR_BOARD_IRQS
-#define NR_BOARD_IRQS 0
-#endif
-
-#ifndef UIC_WIDTH /* Number of interrupts per device */
-#define UIC_WIDTH 32
-#endif
-
-#ifndef NR_UICS /* number of UIC devices */
-#define NR_UICS 1
-#endif
-
-#if defined (CONFIG_403)
-/*
- * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
- * 32 possible interrupts, a majority of which are not implemented on
- * all cores. There are six configurable, external interrupt pins and
- * there are eight internal interrupts for the on-chip serial port
- * (SPU), DMA controller, and JTAG controller.
- *
- */
-
-#define NR_AIC_IRQS 32
-#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS)
-
-#elif !defined (CONFIG_403)
-
-/*
- * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
- * possible interrupts as well. There are seven, configurable external
- * interrupt pins and there are 17 internal interrupts for the on-chip
- * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
- *
- */
-
-
-#define NR_UIC_IRQS UIC_WIDTH
-#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
-#endif
-
-#elif defined(CONFIG_44x)
-#include <asm/ibm44x.h>
-
-#define NR_UIC_IRQS 32
-#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
-
-#elif defined(CONFIG_8xx)
-
-/* Now include the board configuration specific associations.
-*/
-#include <asm/mpc8xx.h>
-
-/* The MPC8xx cores have 16 possible interrupts. There are eight
- * possible level sensitive interrupts assigned and generated internally
- * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
- * There are eight external interrupts (IRQs) that can be configured
- * as either level or edge sensitive.
- *
- * On some implementations, there is also the possibility of an 8259
- * through the PCI and PCI-ISA bridges.
- *
- * We are "flattening" the interrupt vectors of the cascaded CPM
- * and 8259 interrupt controllers so that we can uniquely identify
- * any interrupt source with a single integer.
- */
-#define NR_SIU_INTS 16
-#define NR_CPM_INTS 32
-#ifndef NR_8259_INTS
-#define NR_8259_INTS 0
-#endif
-
-#define SIU_IRQ_OFFSET 0
-#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS)
-#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS)
-
-#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
-
-/* These values must be zero-based and map 1:1 with the SIU configuration.
- * They are used throughout the 8xx I/O subsystem to generate
- * interrupt masks, flags, and other control patterns. This is why the
- * current kernel assumption of the 8259 as the base controller is such
- * a pain in the butt.
- */
-#define SIU_IRQ0 (0) /* Highest priority */
-#define SIU_LEVEL0 (1)
-#define SIU_IRQ1 (2)
-#define SIU_LEVEL1 (3)
-#define SIU_IRQ2 (4)
-#define SIU_LEVEL2 (5)
-#define SIU_IRQ3 (6)
-#define SIU_LEVEL3 (7)
-#define SIU_IRQ4 (8)
-#define SIU_LEVEL4 (9)
-#define SIU_IRQ5 (10)
-#define SIU_LEVEL5 (11)
-#define SIU_IRQ6 (12)
-#define SIU_LEVEL6 (13)
-#define SIU_IRQ7 (14)
-#define SIU_LEVEL7 (15)
-
-#define MPC8xx_INT_FEC1 SIU_LEVEL1
-#define MPC8xx_INT_FEC2 SIU_LEVEL3
-
-#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1)
-#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2)
-#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3)
-#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4)
-#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1)
-#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2)
-
-/* The internal interrupts we can configure as we see fit.
- * My personal preference is CPM at level 2, which puts it above the
- * MBX PCI/ISA/IDE interrupts.
- */
-#ifndef PIT_INTERRUPT
-#define PIT_INTERRUPT SIU_LEVEL0
-#endif
-#ifndef CPM_INTERRUPT
-#define CPM_INTERRUPT SIU_LEVEL2
-#endif
-#ifndef PCMCIA_INTERRUPT
-#define PCMCIA_INTERRUPT SIU_LEVEL6
-#endif
-#ifndef DEC_INTERRUPT
-#define DEC_INTERRUPT SIU_LEVEL7
-#endif
-
-/* Some internal interrupt registers use an 8-bit mask for the interrupt
- * level instead of a number.
- */
-#define mk_int_int_mask(IL) (1 << (7 - (IL/2)))
-
-#else /* CONFIG_40x + CONFIG_8xx */
-/*
- * this is the # irq's for all ppc arch's (pmac/chrp/prep)
- * so it is the max of them all
- */
-#define NR_IRQS 256
-#define __DO_IRQ_CANON 1
-
-#ifndef CONFIG_8260
-
-#define NUM_8259_INTERRUPTS 16
-
-#else /* CONFIG_8260 */
-
-/* The 8260 has an internal interrupt controller with a maximum of
- * 64 IRQs. We will use NR_IRQs from above since it is large enough.
- * Don't be confused by the 8260 documentation where they list an
- * "interrupt number" and "interrupt vector". We are only interested
- * in the interrupt vector. There are "reserved" holes where the
- * vector number increases, but the interrupt number in the table does not.
- * (Document errata updates have fixed this...make sure you have up to
- * date processor documentation -- Dan).
- */
-
-#ifndef CPM_IRQ_OFFSET
-#define CPM_IRQ_OFFSET 0
-#endif
-
-#define NR_CPM_INTS 64
-
-#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET)
-#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET)
-#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET)
-#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET)
-#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET)
-#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET)
-#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET)
-#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET)
-#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET)
-#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET)
-#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET)
-#define SIU_INT_USB ((uint)0x0b + CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET)
-#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET)
-#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET)
-#define SIU_INT_PCI ((uint)0x12 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET)
-#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET)
-#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET)
-#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET)
-#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET)
-#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET)
-#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET)
-#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET)
-#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET)
-#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET)
-#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET)
-#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET)
-#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET)
-#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET)
-#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET)
-#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET)
-
-#endif /* CONFIG_8260 */
-
-#endif /* Whatever way too big #ifdef */
-
-#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
-/* pedantic: these are long because they are used with set_bit --RR */
-extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-
-/*
- * Because many systems have two overlapping names spaces for
- * interrupts (ISA and XICS for example), and the ISA interrupts
- * have historically not been easy to renumber, we allow ISA
- * interrupts to take values 0 - 15, and shift up the remaining
- * interrupts by 0x10.
- */
-#define NUM_ISA_INTERRUPTS 0x10
-extern int __irq_offset_value;
-
-static inline int irq_offset_up(int irq)
-{
- return(irq + __irq_offset_value);
-}
-
-static inline int irq_offset_down(int irq)
-{
- return(irq - __irq_offset_value);
-}
-
-static inline int irq_offset_value(void)
-{
- return __irq_offset_value;
-}
-
-#ifdef __DO_IRQ_CANON
-extern int ppc_do_canonicalize_irqs;
-#else
-#define ppc_do_canonicalize_irqs 0
-#endif
-
-static __inline__ int irq_canonicalize(int irq)
-{
- if (ppc_do_canonicalize_irqs && irq == 2)
- irq = 9;
- return irq;
-}
-#endif /* CONFIG_PPC_MERGE */
-
extern int distribute_irqs;
struct irqaction;
--
1.5.5.1
Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore remove
the dead code associated with !CONFIG_PPC_MERGE.
Signed-off-by: Kumar Gala <[email protected]>
---
drivers/usb/host/ehci-hcd.c | 5 -
drivers/usb/host/ehci-ppc-soc.c | 201 ---------------------------------------
drivers/usb/host/ehci.h | 9 --
drivers/usb/host/ohci.h | 8 --
4 files changed, 0 insertions(+), 223 deletions(-)
delete mode 100644 drivers/usb/host/ehci-ppc-soc.c
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index d9d53f2..84ed135 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1014,11 +1014,6 @@ MODULE_LICENSE ("GPL");
#define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver
#endif
-#if defined(CONFIG_440EPX) && !defined(CONFIG_PPC_MERGE)
-#include "ehci-ppc-soc.c"
-#define PLATFORM_DRIVER ehci_ppc_soc_driver
-#endif
-
#ifdef CONFIG_USB_EHCI_HCD_PPC_OF
#include "ehci-ppc-of.c"
#define OF_PLATFORM_DRIVER ehci_hcd_ppc_of_driver
diff --git a/drivers/usb/host/ehci-ppc-soc.c b/drivers/usb/host/ehci-ppc-soc.c
deleted file mode 100644
index 529590e..0000000
--- a/drivers/usb/host/ehci-ppc-soc.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * EHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 2006-2007 Stefan Roese <[email protected]>, DENX Software Engineering
- *
- * Bus Glue for PPC On-Chip EHCI driver
- * Tested on AMCC 440EPx
- *
- * Based on "ehci-au1xxx.c" by K.Boge <[email protected]>
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/platform_device.h>
-
-extern int usb_disabled(void);
-
-/* called during probe() after chip reset completes */
-static int ehci_ppc_soc_setup(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int retval;
-
- retval = ehci_halt(ehci);
- if (retval)
- return retval;
-
- retval = ehci_init(hcd);
- if (retval)
- return retval;
-
- ehci->sbrn = 0x20;
- return ehci_reset(ehci);
-}
-
-/**
- * usb_ehci_ppc_soc_probe - initialize PPC-SoC-based HCDs
- * Context: !in_interrupt()
- *
- * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- *
- */
-int usb_ehci_ppc_soc_probe(const struct hc_driver *driver,
- struct usb_hcd **hcd_out,
- struct platform_device *dev)
-{
- int retval;
- struct usb_hcd *hcd;
- struct ehci_hcd *ehci;
-
- if (dev->resource[1].flags != IORESOURCE_IRQ) {
- pr_debug("resource[1] is not IORESOURCE_IRQ");
- retval = -ENOMEM;
- }
- hcd = usb_create_hcd(driver, &dev->dev, "PPC-SOC EHCI");
- if (!hcd)
- return -ENOMEM;
- hcd->rsrc_start = dev->resource[0].start;
- hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
-
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
- pr_debug("request_mem_region failed");
- retval = -EBUSY;
- goto err1;
- }
-
- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
- if (!hcd->regs) {
- pr_debug("ioremap failed");
- retval = -ENOMEM;
- goto err2;
- }
-
- ehci = hcd_to_ehci(hcd);
- ehci->big_endian_mmio = 1;
- ehci->big_endian_desc = 1;
- ehci->caps = hcd->regs;
- ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
-
- /* cache this readonly data; minimize chip reads */
- ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-
-#if defined(CONFIG_440EPX)
- /*
- * 440EPx Errata USBH_3
- * Fix: Enable Break Memory Transfer (BMT) in INSNREG3
- */
- out_be32((void *)((ulong)(&ehci->regs->command) + 0x8c), (1 << 0));
- ehci_dbg(ehci, "Break Memory Transfer (BMT) has beed enabled!\n");
-#endif
-
- retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);
- if (retval == 0)
- return retval;
-
- iounmap(hcd->regs);
-err2:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err1:
- usb_put_hcd(hcd);
- return retval;
-}
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
-/**
- * usb_ehci_hcd_ppc_soc_remove - shutdown processing for PPC-SoC-based HCDs
- * @dev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_ehci_hcd_ppc_soc_probe(), first invoking
- * the HCD's stop() method. It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
- *
- */
-void usb_ehci_ppc_soc_remove(struct usb_hcd *hcd, struct platform_device *dev)
-{
- usb_remove_hcd(hcd);
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- usb_put_hcd(hcd);
-}
-
-static const struct hc_driver ehci_ppc_soc_hc_driver = {
- .description = hcd_name,
- .product_desc = "PPC-SOC EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_ppc_soc_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-};
-
-static int ehci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = NULL;
- int ret;
-
- pr_debug("In ehci_hcd_ppc_soc_drv_probe\n");
-
- if (usb_disabled())
- return -ENODEV;
-
- /* FIXME we only want one one probe() not two */
- ret = usb_ehci_ppc_soc_probe(&ehci_ppc_soc_hc_driver, &hcd, pdev);
- return ret;
-}
-
-static int ehci_hcd_ppc_soc_drv_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- /* FIXME we only want one one remove() not two */
- usb_ehci_ppc_soc_remove(hcd, pdev);
- return 0;
-}
-
-MODULE_ALIAS("platform:ppc-soc-ehci");
-static struct platform_driver ehci_ppc_soc_driver = {
- .probe = ehci_hcd_ppc_soc_drv_probe,
- .remove = ehci_hcd_ppc_soc_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
- .driver = {
- .name = "ppc-soc-ehci",
- }
-};
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 5799298..8a09842 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -740,16 +740,7 @@ ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
/*
* Big-endian read/write functions are arch-specific.
* Other arches can be added if/when they're needed.
- *
- * REVISIT: arch/powerpc now has readl/writel_be, so the
- * definition below can die once the 4xx support is
- * finally ported over.
*/
-#if defined(CONFIG_PPC) && !defined(CONFIG_PPC_MERGE)
-#define readl_be(addr) in_be32((__force unsigned *)addr)
-#define writel_be(val, addr) out_be32((__force unsigned *)addr, val)
-#endif
-
#if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX)
#define readl_be(addr) __raw_readl((__force unsigned *)addr)
#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index dc544dd..2f0489b 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -529,15 +529,7 @@ static inline struct usb_hcd *ohci_to_hcd (const struct ohci_hcd *ohci)
* Big-endian read/write functions are arch-specific.
* Other arches can be added if/when they're needed.
*
- * REVISIT: arch/powerpc now has readl/writel_be, so the
- * definition below can die once the STB04xxx support is
- * finally ported over.
*/
-#if defined(CONFIG_PPC) && !defined(CONFIG_PPC_MERGE)
-#define readl_be(addr) in_be32((__force unsigned *)addr)
-#define writel_be(val, addr) out_be32((__force unsigned *)addr, val)
-#endif
-
static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci,
__hc32 __iomem * regs)
{
--
1.5.5.1
Now that arch/ppc is dead CONFIG_PPC_MERGE is always defined for all
powerpc platforms so we don't need to depend on it.
Signed-off-by: Kumar Gala <[email protected]>
---
drivers/net/Kconfig | 2 +-
drivers/net/ibm_newemac/Kconfig | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index fa533c2..4e89c81 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1812,7 +1812,7 @@ config FEC2
config FEC_MPC52xx
tristate "MPC52xx FEC driver"
- depends on PPC_MERGE && PPC_MPC52xx && PPC_BESTCOMM_FEC
+ depends on PPC_MPC52xx && PPC_BESTCOMM_FEC
select CRC32
select PHYLIB
---help---
diff --git a/drivers/net/ibm_newemac/Kconfig b/drivers/net/ibm_newemac/Kconfig
index 70a3272..bcec732 100644
--- a/drivers/net/ibm_newemac/Kconfig
+++ b/drivers/net/ibm_newemac/Kconfig
@@ -1,6 +1,6 @@
config IBM_NEW_EMAC
tristate "IBM EMAC Ethernet support"
- depends on PPC_DCR && PPC_MERGE
+ depends on PPC_DCR
select CRC32
help
This driver supports the IBM EMAC family of Ethernet controllers
--
1.5.5.1
Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore remove
the dead code associated with !CONFIG_PPC_MERGE.
With this change the pre_request_irq() and post_free_irq() calls became
nops so they have been removed.
Signed-off-by: Kumar Gala <[email protected]>
---
drivers/net/fs_enet/fs_enet-main.c | 2 --
drivers/net/fs_enet/fs_enet.h | 2 --
drivers/net/fs_enet/mac-fcc.c | 12 ------------
drivers/net/fs_enet/mac-fec.c | 30 ------------------------------
drivers/net/fs_enet/mac-scc.c | 26 --------------------------
5 files changed, 0 insertions(+), 72 deletions(-)
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 9a51ec8..e54d003 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -669,7 +669,6 @@ static int fs_request_irq(struct net_device *dev, int irq, const char *name,
{
struct fs_enet_private *fep = netdev_priv(dev);
- (*fep->ops->pre_request_irq)(dev, irq);
return request_irq(irq, irqf, IRQF_SHARED, name, dev);
}
@@ -678,7 +677,6 @@ static void fs_free_irq(struct net_device *dev, int irq)
struct fs_enet_private *fep = netdev_priv(dev);
free_irq(irq, dev);
- (*fep->ops->post_free_irq)(dev, irq);
}
static void fs_timeout(struct net_device *dev)
diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h
index db46d2e..85a4bab 100644
--- a/drivers/net/fs_enet/fs_enet.h
+++ b/drivers/net/fs_enet/fs_enet.h
@@ -34,8 +34,6 @@ struct fs_ops {
void (*adjust_link)(struct net_device *dev);
void (*restart)(struct net_device *dev);
void (*stop)(struct net_device *dev);
- void (*pre_request_irq)(struct net_device *dev, int irq);
- void (*post_free_irq)(struct net_device *dev, int irq);
void (*napi_clear_rx_event)(struct net_device *dev);
void (*napi_enable_rx)(struct net_device *dev);
void (*napi_disable_rx)(struct net_device *dev);
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
index 0a97fc2..b8c40d0 100644
--- a/drivers/net/fs_enet/mac-fcc.c
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -421,16 +421,6 @@ static void stop(struct net_device *dev)
fs_cleanup_bds(dev);
}
-static void pre_request_irq(struct net_device *dev, int irq)
-{
- /* nothing */
-}
-
-static void post_free_irq(struct net_device *dev, int irq)
-{
- /* nothing */
-}
-
static void napi_clear_rx_event(struct net_device *dev)
{
struct fs_enet_private *fep = netdev_priv(dev);
@@ -540,8 +530,6 @@ const struct fs_ops fs_fcc_ops = {
.set_multicast_list = set_multicast_list,
.restart = restart,
.stop = stop,
- .pre_request_irq = pre_request_irq,
- .post_free_irq = post_free_irq,
.napi_clear_rx_event = napi_clear_rx_event,
.napi_enable_rx = napi_enable_rx,
.napi_disable_rx = napi_disable_rx,
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
index 0a7d1c5..14e5753 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -313,11 +313,7 @@ static void restart(struct net_device *dev)
* Clear any outstanding interrupt.
*/
FW(fecp, ievent, 0xffc0);
-#ifndef CONFIG_PPC_MERGE
- FW(fecp, ivec, (fep->interrupt / 2) << 29);
-#else
FW(fecp, ivec, (virq_to_hw(fep->interrupt) / 2) << 29);
-#endif
/*
* adjust to speed (only for DUET & RMII)
@@ -413,30 +409,6 @@ static void stop(struct net_device *dev)
}
}
-static void pre_request_irq(struct net_device *dev, int irq)
-{
-#ifndef CONFIG_PPC_MERGE
- immap_t *immap = fs_enet_immap;
- u32 siel;
-
- /* SIU interrupt */
- if (irq >= SIU_IRQ0 && irq < SIU_LEVEL7) {
-
- siel = in_be32(&immap->im_siu_conf.sc_siel);
- if ((irq & 1) == 0)
- siel |= (0x80000000 >> irq);
- else
- siel &= ~(0x80000000 >> (irq & ~1));
- out_be32(&immap->im_siu_conf.sc_siel, siel);
- }
-#endif
-}
-
-static void post_free_irq(struct net_device *dev, int irq)
-{
- /* nothing */
-}
-
static void napi_clear_rx_event(struct net_device *dev)
{
struct fs_enet_private *fep = netdev_priv(dev);
@@ -529,8 +501,6 @@ const struct fs_ops fs_fec_ops = {
.set_multicast_list = set_multicast_list,
.restart = restart,
.stop = stop,
- .pre_request_irq = pre_request_irq,
- .post_free_irq = post_free_irq,
.napi_clear_rx_event = napi_clear_rx_event,
.napi_enable_rx = napi_enable_rx,
.napi_disable_rx = napi_disable_rx,
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c
index 029b3c7..397608a 100644
--- a/drivers/net/fs_enet/mac-scc.c
+++ b/drivers/net/fs_enet/mac-scc.c
@@ -371,30 +371,6 @@ static void stop(struct net_device *dev)
fs_cleanup_bds(dev);
}
-static void pre_request_irq(struct net_device *dev, int irq)
-{
-#ifndef CONFIG_PPC_MERGE
- immap_t *immap = fs_enet_immap;
- u32 siel;
-
- /* SIU interrupt */
- if (irq >= SIU_IRQ0 && irq < SIU_LEVEL7) {
-
- siel = in_be32(&immap->im_siu_conf.sc_siel);
- if ((irq & 1) == 0)
- siel |= (0x80000000 >> irq);
- else
- siel &= ~(0x80000000 >> (irq & ~1));
- out_be32(&immap->im_siu_conf.sc_siel, siel);
- }
-#endif
-}
-
-static void post_free_irq(struct net_device *dev, int irq)
-{
- /* nothing */
-}
-
static void napi_clear_rx_event(struct net_device *dev)
{
struct fs_enet_private *fep = netdev_priv(dev);
@@ -488,8 +464,6 @@ const struct fs_ops fs_scc_ops = {
.set_multicast_list = set_multicast_list,
.restart = restart,
.stop = stop,
- .pre_request_irq = pre_request_irq,
- .post_free_irq = post_free_irq,
.napi_clear_rx_event = napi_clear_rx_event,
.napi_enable_rx = napi_enable_rx,
.napi_disable_rx = napi_disable_rx,
--
1.5.5.1
Now that arch/ppc is dead CONFIG_PPC_MERGE is always defined for all
powerpc platforms and we want to get rid of it use CONFIG_PPC instead.
Signed-off-by: Kumar Gala <[email protected]>
---
drivers/rtc/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 90ab738..564a3ed 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -577,7 +577,7 @@ config RTC_DRV_RS5C313
config RTC_DRV_PPC
tristate "PowerPC machine dependent RTC support"
- depends on PPC_MERGE
+ depends on PPC
help
The PowerPC kernel has machine-specific functions for accessing
the RTC. This exposes that functionality through the generic RTC
--
1.5.5.1
Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore
remove the dead code associated with !CONFIG_PPC_MERGE.
Signed-off-by: Kumar Gala <[email protected]>
---
drivers/spi/mpc52xx_psc_spi.c | 55 -----------------------------------------
1 files changed, 0 insertions(+), 55 deletions(-)
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 25eda71..c3a9e5c 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -15,13 +15,7 @@
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
-
-#if defined(CONFIG_PPC_MERGE)
#include <linux/of_platform.h>
-#else
-#include <linux/platform_device.h>
-#endif
-
#include <linux/workqueue.h>
#include <linux/completion.h>
#include <linux/io.h>
@@ -471,53 +465,6 @@ static int __exit mpc52xx_psc_spi_do_remove(struct device *dev)
return 0;
}
-#if !defined(CONFIG_PPC_MERGE)
-static int __init mpc52xx_psc_spi_probe(struct platform_device *dev)
-{
- switch(dev->id) {
- case 1:
- case 2:
- case 3:
- case 6:
- return mpc52xx_psc_spi_do_probe(&dev->dev,
- MPC52xx_PA(MPC52xx_PSCx_OFFSET(dev->id)),
- MPC52xx_PSC_SIZE, platform_get_irq(dev, 0), dev->id);
- default:
- return -EINVAL;
- }
-}
-
-static int __exit mpc52xx_psc_spi_remove(struct platform_device *dev)
-{
- return mpc52xx_psc_spi_do_remove(&dev->dev);
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:mpc52xx-psc-spi");
-
-static struct platform_driver mpc52xx_psc_spi_platform_driver = {
- .remove = __exit_p(mpc52xx_psc_spi_remove),
- .driver = {
- .name = "mpc52xx-psc-spi",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init mpc52xx_psc_spi_init(void)
-{
- return platform_driver_probe(&mpc52xx_psc_spi_platform_driver,
- mpc52xx_psc_spi_probe);
-}
-module_init(mpc52xx_psc_spi_init);
-
-static void __exit mpc52xx_psc_spi_exit(void)
-{
- platform_driver_unregister(&mpc52xx_psc_spi_platform_driver);
-}
-module_exit(mpc52xx_psc_spi_exit);
-
-#else /* defined(CONFIG_PPC_MERGE) */
-
static int __init mpc52xx_psc_spi_of_probe(struct of_device *op,
const struct of_device_id *match)
{
@@ -586,8 +533,6 @@ static void __exit mpc52xx_psc_spi_exit(void)
}
module_exit(mpc52xx_psc_spi_exit);
-#endif /* defined(CONFIG_PPC_MERGE) */
-
MODULE_AUTHOR("Dragos Carp");
MODULE_DESCRIPTION("MPC52xx PSC SPI Driver");
MODULE_LICENSE("GPL");
--
1.5.5.1
Now that arch/ppc is dead CONFIG_PPC_MERGE is always defined for all
powerpc platforms and we want to get rid of CONFIG_PPC_MERGE use
CONFIG_PPC instead.
Signed-off-by: Kumar Gala <[email protected]>
---
drivers/block/floppy.c | 2 +-
drivers/char/ipmi/ipmi_si_intf.c | 2 +-
drivers/i2c/busses/i2c-pca-isa.c | 2 +-
drivers/input/serio/i8042-io.h | 2 +-
drivers/pnp/isapnp/core.c | 2 +-
drivers/pnp/pnpbios/core.c | 4 ++--
6 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 395f8ea..5813e0d 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4165,7 +4165,7 @@ static int __init floppy_init(void)
int i, unit, drive;
int err, dr;
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(FDC1))
return -ENODEV;
#endif
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index f52931e..7ca4275 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2700,7 +2700,7 @@ static __devinit void default_find_bmc(void)
if (!info)
return;
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (check_legacy_ioport(ipmi_defaults[i].port))
continue;
#endif
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index a119784..28d8463 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -113,7 +113,7 @@ static int __devinit pca_isa_probe(struct device *dev, unsigned int id)
dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq);
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (check_legacy_ioport(base)) {
dev_err(dev, "I/O address %#08lx is not available\n", base);
goto out;
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
index f451c73..847f4aa 100644
--- a/drivers/input/serio/i8042-io.h
+++ b/drivers/input/serio/i8042-io.h
@@ -67,7 +67,7 @@ static inline int i8042_platform_init(void)
* On some platforms touching the i8042 data register region can do really
* bad things. Because of this the region is always reserved on such boxes.
*/
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(I8042_DATA_REG))
return -ENODEV;
#endif
diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c
index 101a835..46455fb 100644
--- a/drivers/pnp/isapnp/core.c
+++ b/drivers/pnp/isapnp/core.c
@@ -1012,7 +1012,7 @@ static int __init isapnp_init(void)
printk(KERN_INFO "isapnp: ISA Plug & Play support disabled\n");
return 0;
}
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (check_legacy_ioport(_PIDXR) || check_legacy_ioport(_PNPWRP))
return -EINVAL;
#endif
diff --git a/drivers/pnp/pnpbios/core.c b/drivers/pnp/pnpbios/core.c
index 19a4be1..0797dd1 100644
--- a/drivers/pnp/pnpbios/core.c
+++ b/drivers/pnp/pnpbios/core.c
@@ -519,7 +519,7 @@ static int __init pnpbios_init(void)
{
int ret;
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(PNPBIOS_BASE))
return -ENODEV;
#endif
@@ -577,7 +577,7 @@ static int __init pnpbios_thread_init(void)
{
struct task_struct *task;
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(PNPBIOS_BASE))
return 0;
#endif
--
1.5.5.1
Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore
remove the dead code associated with !CONFIG_PPC_MERGE.
Signed-off-by: Kumar Gala <[email protected]>
---
drivers/serial/mpc52xx_uart.c | 181 +----------------------------------------
1 files changed, 1 insertions(+), 180 deletions(-)
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 3612607..6117d3d 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -72,13 +72,8 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/io.h>
-
-#if defined(CONFIG_PPC_MERGE)
#include <linux/of.h>
#include <linux/of_platform.h>
-#else
-#include <linux/platform_device.h>
-#endif
#include <asm/mpc52xx.h>
#include <asm/mpc512x.h>
@@ -107,12 +102,11 @@ static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM];
* it's cleared, then a memset(...,0,...) should be added to
* the console_init
*/
-#if defined(CONFIG_PPC_MERGE)
+
/* lookup table for matching device nodes to index numbers */
static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM];
static void mpc52xx_uart_of_enumerate(void);
-#endif
#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
@@ -255,17 +249,12 @@ static void mpc52xx_psc_cw_restore_ints(struct uart_port *port)
/* Search for bus-frequency property in this node or a parent */
static unsigned long mpc52xx_getuartclk(void *p)
{
-#if defined(CONFIG_PPC_MERGE)
/*
* 5200 UARTs have a / 32 prescaler
* but the generic serial code assumes 16
* so return ipb freq / 2
*/
return mpc52xx_find_ipb_freq(p) / 2;
-#else
- pr_debug("unexpected call to mpc52xx_getuartclk with arch/ppc\n");
- return NULL;
-#endif
}
static struct psc_ops mpc52xx_psc_ops = {
@@ -886,10 +875,6 @@ mpc52xx_console_get_options(struct uart_port *port,
/* CT{U,L}R are write-only ! */
*baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
-#if !defined(CONFIG_PPC_MERGE)
- if (__res.bi_baudrate)
- *baud = __res.bi_baudrate;
-#endif
/* Parse them */
switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) {
@@ -946,42 +931,6 @@ mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
psc_ops->cw_restore_ints(port);
}
-#if !defined(CONFIG_PPC_MERGE)
-static int __init
-mpc52xx_console_setup(struct console *co, char *options)
-{
- struct uart_port *port = &mpc52xx_uart_ports[co->index];
-
- int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- if (co->index < 0 || co->index >= MPC52xx_PSC_MAXNUM)
- return -EINVAL;
-
- /* Basic port init. Needed since we use some uart_??? func before
- * real init for early access */
- spin_lock_init(&port->lock);
- port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
- port->ops = &mpc52xx_uart_ops;
- port->mapbase = MPC52xx_PA(MPC52xx_PSCx_OFFSET(co->index+1));
-
- /* We ioremap ourself */
- port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE);
- if (port->membase == NULL)
- return -EINVAL;
-
- /* Setup the port parameters accoding to options */
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- else
- mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow);
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-#else
static int __init
mpc52xx_console_setup(struct console *co, char *options)
@@ -1053,7 +1002,6 @@ mpc52xx_console_setup(struct console *co, char *options)
return uart_set_options(port, co, baud, parity, bits, flow);
}
-#endif /* defined(CONFIG_PPC_MERGE) */
static struct uart_driver mpc52xx_uart_driver;
@@ -1072,9 +1020,7 @@ static struct console mpc52xx_console = {
static int __init
mpc52xx_console_init(void)
{
-#if defined(CONFIG_PPC_MERGE)
mpc52xx_uart_of_enumerate();
-#endif
register_console(&mpc52xx_console);
return 0;
}
@@ -1100,115 +1046,6 @@ static struct uart_driver mpc52xx_uart_driver = {
.cons = MPC52xx_PSC_CONSOLE,
};
-
-#if !defined(CONFIG_PPC_MERGE)
-/* ======================================================================== */
-/* Platform Driver */
-/* ======================================================================== */
-
-static int __devinit
-mpc52xx_uart_probe(struct platform_device *dev)
-{
- struct resource *res = dev->resource;
-
- struct uart_port *port = NULL;
- int i, idx, ret;
-
- /* Check validity & presence */
- idx = dev->id;
- if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM)
- return -EINVAL;
-
- if (!mpc52xx_match_psc_function(idx, "uart"))
- return -ENODEV;
-
- /* Init the port structure */
- port = &mpc52xx_uart_ports[idx];
-
- spin_lock_init(&port->lock);
- port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
- port->fifosize = 512;
- port->iotype = UPIO_MEM;
- port->flags = UPF_BOOT_AUTOCONF |
- (uart_console(port) ? 0 : UPF_IOREMAP);
- port->line = idx;
- port->ops = &mpc52xx_uart_ops;
- port->dev = &dev->dev;
-
- /* Search for IRQ and mapbase */
- for (i = 0 ; i < dev->num_resources ; i++, res++) {
- if (res->flags & IORESOURCE_MEM)
- port->mapbase = res->start;
- else if (res->flags & IORESOURCE_IRQ)
- port->irq = res->start;
- }
- if (!port->irq || !port->mapbase)
- return -EINVAL;
-
- /* Add the port to the uart sub-system */
- ret = uart_add_one_port(&mpc52xx_uart_driver, port);
- if (!ret)
- platform_set_drvdata(dev, (void *)port);
-
- return ret;
-}
-
-static int
-mpc52xx_uart_remove(struct platform_device *dev)
-{
- struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
-
- platform_set_drvdata(dev, NULL);
-
- if (port)
- uart_remove_one_port(&mpc52xx_uart_driver, port);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int
-mpc52xx_uart_suspend(struct platform_device *dev, pm_message_t state)
-{
- struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
-
- if (port)
- uart_suspend_port(&mpc52xx_uart_driver, port);
-
- return 0;
-}
-
-static int
-mpc52xx_uart_resume(struct platform_device *dev)
-{
- struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
-
- if (port)
- uart_resume_port(&mpc52xx_uart_driver, port);
-
- return 0;
-}
-#endif
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:mpc52xx-psc");
-
-static struct platform_driver mpc52xx_uart_platform_driver = {
- .probe = mpc52xx_uart_probe,
- .remove = mpc52xx_uart_remove,
-#ifdef CONFIG_PM
- .suspend = mpc52xx_uart_suspend,
- .resume = mpc52xx_uart_resume,
-#endif
- .driver = {
- .owner = THIS_MODULE,
- .name = "mpc52xx-psc",
- },
-};
-#endif /* !defined(CONFIG_PPC_MERGE) */
-
-
-#if defined(CONFIG_PPC_MERGE)
/* ======================================================================== */
/* OF Platform Driver */
/* ======================================================================== */
@@ -1402,7 +1239,6 @@ static struct of_platform_driver mpc52xx_uart_of_driver = {
.name = "mpc52xx-psc-uart",
},
};
-#endif /* defined(CONFIG_PPC_MERGE) */
/* ======================================================================== */
@@ -1423,7 +1259,6 @@ mpc52xx_uart_init(void)
return ret;
}
-#if defined(CONFIG_PPC_MERGE)
mpc52xx_uart_of_enumerate();
ret = of_register_platform_driver(&mpc52xx_uart_of_driver);
@@ -1433,16 +1268,6 @@ mpc52xx_uart_init(void)
uart_unregister_driver(&mpc52xx_uart_driver);
return ret;
}
-#else
- psc_ops = &mpc52xx_psc_ops;
- ret = platform_driver_register(&mpc52xx_uart_platform_driver);
- if (ret) {
- printk(KERN_ERR "%s: platform_driver_register failed (%i)\n",
- __FILE__, ret);
- uart_unregister_driver(&mpc52xx_uart_driver);
- return ret;
- }
-#endif
return 0;
}
@@ -1450,11 +1275,7 @@ mpc52xx_uart_init(void)
static void __exit
mpc52xx_uart_exit(void)
{
-#if defined(CONFIG_PPC_MERGE)
of_unregister_platform_driver(&mpc52xx_uart_of_driver);
-#else
- platform_driver_unregister(&mpc52xx_uart_platform_driver);
-#endif
uart_unregister_driver(&mpc52xx_uart_driver);
}
--
1.5.5.1
Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore
remove the dead code associated with !CONFIG_PPC_MERGE.
The mtd maps should be using the OF based mechanism.
Signed-off-by: Kumar Gala <[email protected]>
---
drivers/mtd/maps/Kconfig | 24 -------
drivers/mtd/maps/Makefile | 3 -
drivers/mtd/maps/ebony.c | 163 ---------------------------------------------
drivers/mtd/maps/ocotea.c | 154 ------------------------------------------
drivers/mtd/maps/walnut.c | 122 ---------------------------------
5 files changed, 0 insertions(+), 466 deletions(-)
delete mode 100644 drivers/mtd/maps/ebony.c
delete mode 100644 drivers/mtd/maps/ocotea.c
delete mode 100644 drivers/mtd/maps/walnut.c
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index df8e00b..db667b1 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -332,30 +332,6 @@ config MTD_CFI_FLAGADM
Mapping for the Flaga digital module. If you don't have one, ignore
this setting.
-config MTD_WALNUT
- tristate "Flash device mapped on IBM 405GP Walnut"
- depends on MTD_JEDECPROBE && WALNUT && !PPC_MERGE
- help
- This enables access routines for the flash chips on the IBM 405GP
- Walnut board. If you have one of these boards and would like to
- use the flash chips on it, say 'Y'.
-
-config MTD_EBONY
- tristate "Flash devices mapped on IBM 440GP Ebony"
- depends on MTD_JEDECPROBE && EBONY && !PPC_MERGE
- help
- This enables access routines for the flash chips on the IBM 440GP
- Ebony board. If you have one of these boards and would like to
- use the flash chips on it, say 'Y'.
-
-config MTD_OCOTEA
- tristate "Flash devices mapped on IBM 440GX Ocotea"
- depends on MTD_CFI && OCOTEA && !PPC_MERGE
- help
- This enables access routines for the flash chips on the IBM 440GX
- Ocotea board. If you have one of these boards and would like to
- use the flash chips on it, say 'Y'.
-
config MTD_REDWOOD
tristate "CFI Flash devices mapped on IBM Redwood"
depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 6cda6df..b258250 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -50,9 +50,6 @@ obj-$(CONFIG_MTD_REDWOOD) += redwood.o
obj-$(CONFIG_MTD_UCLINUX) += uclinux.o
obj-$(CONFIG_MTD_NETtel) += nettel.o
obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o
-obj-$(CONFIG_MTD_EBONY) += ebony.o
-obj-$(CONFIG_MTD_OCOTEA) += ocotea.o
-obj-$(CONFIG_MTD_WALNUT) += walnut.o
obj-$(CONFIG_MTD_H720X) += h720x-flash.o
obj-$(CONFIG_MTD_SBC8240) += sbc8240.o
obj-$(CONFIG_MTD_NOR_TOTO) += omap-toto-flash.o
diff --git a/drivers/mtd/maps/ebony.c b/drivers/mtd/maps/ebony.c
deleted file mode 100644
index d92b7c7..0000000
--- a/drivers/mtd/maps/ebony.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Mapping for Ebony user flash
- *
- * Matt Porter <[email protected]>
- *
- * Copyright 2002-2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <asm/ibm44x.h>
-#include <platforms/4xx/ebony.h>
-
-static struct mtd_info *flash;
-
-static struct map_info ebony_small_map = {
- .name = "Ebony small flash",
- .size = EBONY_SMALL_FLASH_SIZE,
- .bankwidth = 1,
-};
-
-static struct map_info ebony_large_map = {
- .name = "Ebony large flash",
- .size = EBONY_LARGE_FLASH_SIZE,
- .bankwidth = 1,
-};
-
-static struct mtd_partition ebony_small_partitions[] = {
- {
- .name = "OpenBIOS",
- .offset = 0x0,
- .size = 0x80000,
- }
-};
-
-static struct mtd_partition ebony_large_partitions[] = {
- {
- .name = "fs",
- .offset = 0,
- .size = 0x380000,
- },
- {
- .name = "firmware",
- .offset = 0x380000,
- .size = 0x80000,
- }
-};
-
-int __init init_ebony(void)
-{
- u8 fpga0_reg;
- u8 __iomem *fpga0_adr;
- unsigned long long small_flash_base, large_flash_base;
-
- fpga0_adr = ioremap64(EBONY_FPGA_ADDR, 16);
- if (!fpga0_adr)
- return -ENOMEM;
-
- fpga0_reg = readb(fpga0_adr);
- iounmap(fpga0_adr);
-
- if (EBONY_BOOT_SMALL_FLASH(fpga0_reg) &&
- !EBONY_FLASH_SEL(fpga0_reg))
- small_flash_base = EBONY_SMALL_FLASH_HIGH2;
- else if (EBONY_BOOT_SMALL_FLASH(fpga0_reg) &&
- EBONY_FLASH_SEL(fpga0_reg))
- small_flash_base = EBONY_SMALL_FLASH_HIGH1;
- else if (!EBONY_BOOT_SMALL_FLASH(fpga0_reg) &&
- !EBONY_FLASH_SEL(fpga0_reg))
- small_flash_base = EBONY_SMALL_FLASH_LOW2;
- else
- small_flash_base = EBONY_SMALL_FLASH_LOW1;
-
- if (EBONY_BOOT_SMALL_FLASH(fpga0_reg) &&
- !EBONY_ONBRD_FLASH_EN(fpga0_reg))
- large_flash_base = EBONY_LARGE_FLASH_LOW;
- else
- large_flash_base = EBONY_LARGE_FLASH_HIGH;
-
- ebony_small_map.phys = small_flash_base;
- ebony_small_map.virt = ioremap64(small_flash_base,
- ebony_small_map.size);
-
- if (!ebony_small_map.virt) {
- printk("Failed to ioremap flash\n");
- return -EIO;
- }
-
- simple_map_init(&ebony_small_map);
-
- flash = do_map_probe("jedec_probe", &ebony_small_map);
- if (flash) {
- flash->owner = THIS_MODULE;
- add_mtd_partitions(flash, ebony_small_partitions,
- ARRAY_SIZE(ebony_small_partitions));
- } else {
- printk("map probe failed for flash\n");
- iounmap(ebony_small_map.virt);
- return -ENXIO;
- }
-
- ebony_large_map.phys = large_flash_base;
- ebony_large_map.virt = ioremap64(large_flash_base,
- ebony_large_map.size);
-
- if (!ebony_large_map.virt) {
- printk("Failed to ioremap flash\n");
- iounmap(ebony_small_map.virt);
- return -EIO;
- }
-
- simple_map_init(&ebony_large_map);
-
- flash = do_map_probe("jedec_probe", &ebony_large_map);
- if (flash) {
- flash->owner = THIS_MODULE;
- add_mtd_partitions(flash, ebony_large_partitions,
- ARRAY_SIZE(ebony_large_partitions));
- } else {
- printk("map probe failed for flash\n");
- iounmap(ebony_small_map.virt);
- iounmap(ebony_large_map.virt);
- return -ENXIO;
- }
-
- return 0;
-}
-
-static void __exit cleanup_ebony(void)
-{
- if (flash) {
- del_mtd_partitions(flash);
- map_destroy(flash);
- }
-
- if (ebony_small_map.virt) {
- iounmap(ebony_small_map.virt);
- ebony_small_map.virt = NULL;
- }
-
- if (ebony_large_map.virt) {
- iounmap(ebony_large_map.virt);
- ebony_large_map.virt = NULL;
- }
-}
-
-module_init(init_ebony);
-module_exit(cleanup_ebony);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Matt Porter <[email protected]>");
-MODULE_DESCRIPTION("MTD map and partitions for IBM 440GP Ebony boards");
diff --git a/drivers/mtd/maps/ocotea.c b/drivers/mtd/maps/ocotea.c
deleted file mode 100644
index 5522eac..0000000
--- a/drivers/mtd/maps/ocotea.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Mapping for Ocotea user flash
- *
- * Matt Porter <[email protected]>
- *
- * Copyright 2002-2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <asm/ibm44x.h>
-#include <platforms/4xx/ocotea.h>
-
-static struct mtd_info *flash;
-
-static struct map_info ocotea_small_map = {
- .name = "Ocotea small flash",
- .size = OCOTEA_SMALL_FLASH_SIZE,
- .buswidth = 1,
-};
-
-static struct map_info ocotea_large_map = {
- .name = "Ocotea large flash",
- .size = OCOTEA_LARGE_FLASH_SIZE,
- .buswidth = 1,
-};
-
-static struct mtd_partition ocotea_small_partitions[] = {
- {
- .name = "pibs",
- .offset = 0x0,
- .size = 0x100000,
- }
-};
-
-static struct mtd_partition ocotea_large_partitions[] = {
- {
- .name = "fs",
- .offset = 0,
- .size = 0x300000,
- },
- {
- .name = "firmware",
- .offset = 0x300000,
- .size = 0x100000,
- }
-};
-
-int __init init_ocotea(void)
-{
- u8 fpga0_reg;
- u8 *fpga0_adr;
- unsigned long long small_flash_base, large_flash_base;
-
- fpga0_adr = ioremap64(OCOTEA_FPGA_ADDR, 16);
- if (!fpga0_adr)
- return -ENOMEM;
-
- fpga0_reg = readb((unsigned long)fpga0_adr);
- iounmap(fpga0_adr);
-
- if (OCOTEA_BOOT_LARGE_FLASH(fpga0_reg)) {
- small_flash_base = OCOTEA_SMALL_FLASH_HIGH;
- large_flash_base = OCOTEA_LARGE_FLASH_LOW;
- }
- else {
- small_flash_base = OCOTEA_SMALL_FLASH_LOW;
- large_flash_base = OCOTEA_LARGE_FLASH_HIGH;
- }
-
- ocotea_small_map.phys = small_flash_base;
- ocotea_small_map.virt = ioremap64(small_flash_base,
- ocotea_small_map.size);
-
- if (!ocotea_small_map.virt) {
- printk("Failed to ioremap flash\n");
- return -EIO;
- }
-
- simple_map_init(&ocotea_small_map);
-
- flash = do_map_probe("map_rom", &ocotea_small_map);
- if (flash) {
- flash->owner = THIS_MODULE;
- add_mtd_partitions(flash, ocotea_small_partitions,
- ARRAY_SIZE(ocotea_small_partitions));
- } else {
- printk("map probe failed for flash\n");
- iounmap(ocotea_small_map.virt);
- return -ENXIO;
- }
-
- ocotea_large_map.phys = large_flash_base;
- ocotea_large_map.virt = ioremap64(large_flash_base,
- ocotea_large_map.size);
-
- if (!ocotea_large_map.virt) {
- printk("Failed to ioremap flash\n");
- iounmap(ocotea_small_map.virt);
- return -EIO;
- }
-
- simple_map_init(&ocotea_large_map);
-
- flash = do_map_probe("cfi_probe", &ocotea_large_map);
- if (flash) {
- flash->owner = THIS_MODULE;
- add_mtd_partitions(flash, ocotea_large_partitions,
- ARRAY_SIZE(ocotea_large_partitions));
- } else {
- printk("map probe failed for flash\n");
- iounmap(ocotea_small_map.virt);
- iounmap(ocotea_large_map.virt);
- return -ENXIO;
- }
-
- return 0;
-}
-
-static void __exit cleanup_ocotea(void)
-{
- if (flash) {
- del_mtd_partitions(flash);
- map_destroy(flash);
- }
-
- if (ocotea_small_map.virt) {
- iounmap((void *)ocotea_small_map.virt);
- ocotea_small_map.virt = 0;
- }
-
- if (ocotea_large_map.virt) {
- iounmap((void *)ocotea_large_map.virt);
- ocotea_large_map.virt = 0;
- }
-}
-
-module_init(init_ocotea);
-module_exit(cleanup_ocotea);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Matt Porter <[email protected]>");
-MODULE_DESCRIPTION("MTD map and partitions for IBM 440GX Ocotea boards");
diff --git a/drivers/mtd/maps/walnut.c b/drivers/mtd/maps/walnut.c
deleted file mode 100644
index e243476..0000000
--- a/drivers/mtd/maps/walnut.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Mapping for Walnut flash
- * (used ebony.c as a "framework")
- *
- * Heikki Lindholm <[email protected]>
- *
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <asm/ibm4xx.h>
-#include <platforms/4xx/walnut.h>
-
-/* these should be in platforms/4xx/walnut.h ? */
-#define WALNUT_FLASH_ONBD_N(x) (x & 0x02)
-#define WALNUT_FLASH_SRAM_SEL(x) (x & 0x01)
-#define WALNUT_FLASH_LOW 0xFFF00000
-#define WALNUT_FLASH_HIGH 0xFFF80000
-#define WALNUT_FLASH_SIZE 0x80000
-
-static struct mtd_info *flash;
-
-static struct map_info walnut_map = {
- .name = "Walnut flash",
- .size = WALNUT_FLASH_SIZE,
- .bankwidth = 1,
-};
-
-/* Actually, OpenBIOS is the last 128 KiB of the flash - better
- * partitioning could be made */
-static struct mtd_partition walnut_partitions[] = {
- {
- .name = "OpenBIOS",
- .offset = 0x0,
- .size = WALNUT_FLASH_SIZE,
- /*.mask_flags = MTD_WRITEABLE, */ /* force read-only */
- }
-};
-
-int __init init_walnut(void)
-{
- u8 fpga_brds1;
- void *fpga_brds1_adr;
- void *fpga_status_adr;
- unsigned long flash_base;
-
- /* this should already be mapped (platform/4xx/walnut.c) */
- fpga_status_adr = ioremap(WALNUT_FPGA_BASE, 8);
- if (!fpga_status_adr)
- return -ENOMEM;
-
- fpga_brds1_adr = fpga_status_adr+5;
- fpga_brds1 = readb(fpga_brds1_adr);
- /* iounmap(fpga_status_adr); */
-
- if (WALNUT_FLASH_ONBD_N(fpga_brds1)) {
- printk("The on-board flash is disabled (U79 sw 5)!");
- iounmap(fpga_status_adr);
- return -EIO;
- }
- if (WALNUT_FLASH_SRAM_SEL(fpga_brds1))
- flash_base = WALNUT_FLASH_LOW;
- else
- flash_base = WALNUT_FLASH_HIGH;
-
- walnut_map.phys = flash_base;
- walnut_map.virt =
- (void __iomem *)ioremap(flash_base, walnut_map.size);
-
- if (!walnut_map.virt) {
- printk("Failed to ioremap flash.\n");
- iounmap(fpga_status_adr);
- return -EIO;
- }
-
- simple_map_init(&walnut_map);
-
- flash = do_map_probe("jedec_probe", &walnut_map);
- if (flash) {
- flash->owner = THIS_MODULE;
- add_mtd_partitions(flash, walnut_partitions,
- ARRAY_SIZE(walnut_partitions));
- } else {
- printk("map probe failed for flash\n");
- iounmap(fpga_status_adr);
- return -ENXIO;
- }
-
- iounmap(fpga_status_adr);
- return 0;
-}
-
-static void __exit cleanup_walnut(void)
-{
- if (flash) {
- del_mtd_partitions(flash);
- map_destroy(flash);
- }
-
- if (walnut_map.virt) {
- iounmap((void *)walnut_map.virt);
- walnut_map.virt = 0;
- }
-}
-
-module_init(init_walnut);
-module_exit(cleanup_walnut);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Heikki Lindholm <[email protected]>");
-MODULE_DESCRIPTION("MTD map and partitions for IBM 405GP Walnut boards");
--
1.5.5.1
Now that arch/ppc is dead CONFIG_PPC_MERGE is always defined for all
powerpc platforms and we want to get rid of CONFIG_PPC_MERGE use
CONFIG_PPC instead.
Signed-off-by: Kumar Gala <[email protected]>
---
drivers/ata/pata_sil680.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 720b864..9655511 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -230,7 +230,7 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
tmpbyte & 1, tmpbyte & 0x30);
*try_mmio = 0;
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (machine_is(cell))
*try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
#endif
--
1.5.5.1
On Fri, 2008-08-01 at 11:44 -0500, Kumar Gala wrote:
> Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore
> remove the dead code associated with !CONFIG_PPC_MERGE.
>
> The mtd maps should be using the OF based mechanism.
>
> Signed-off-by: Kumar Gala <[email protected]>
Acked-by: Josh Boyer <[email protected]>
On Fri, Aug 01, 2008 at 11:44:13AM -0500, Kumar Gala wrote:
> diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
> index 9a51ec8..e54d003 100644
> --- a/drivers/net/fs_enet/fs_enet-main.c
> +++ b/drivers/net/fs_enet/fs_enet-main.c
> @@ -669,7 +669,6 @@ static int fs_request_irq(struct net_device *dev, int irq, const char *name,
> {
> struct fs_enet_private *fep = netdev_priv(dev);
>
> - (*fep->ops->pre_request_irq)(dev, irq);
> return request_irq(irq, irqf, IRQF_SHARED, name, dev);
> }
This makes "fep" an unused variable. Eliminate this function entirely,
and call request_irq directly from the caller.
>
> @@ -678,7 +677,6 @@ static void fs_free_irq(struct net_device *dev, int irq)
> struct fs_enet_private *fep = netdev_priv(dev);
>
> free_irq(irq, dev);
> - (*fep->ops->post_free_irq)(dev, irq);
> }
Likewise.
-Scott
Kumar Gala writes:
> This set of patches remove Kconfig and code related to CONFIG_PPC_MERGE
> and !CONFIG_PPC_MERGE. There is some discussion about that one last
> use of !PPC_MERGE with respect to the 4xx MTD_NAND_NDFC driver.
>
> Paul, is this something you'd be willing to entertain for 2.6.27?
Yes, since it's just dead code removal.
Paul.
On Fri, 2008-08-01 at 11:44 -0500, Kumar Gala wrote:
> Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore remove
> the dead code associated with !CONFIG_PPC_MERGE out of arch/powerpc
> and include/asm-powerpc.
...
> diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h
> index 1ef8e30..a372f76 100644
> --- a/include/asm-powerpc/irq.h
> +++ b/include/asm-powerpc/irq.h
...
> -#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET)
> -#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET)
> -#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET)
> -#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET)
> -#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET)
> -
> -#endif /* CONFIG_8260 */
> -
> -#endif /* Whatever way too big #ifdef */
I'll miss that one, it made me laugh once.
cheers
--
Michael Ellerman
OzLabs, IBM Australia Development Lab
wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)
We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person