2008-12-09 11:23:07

by Nigel Cunningham

Subject: [PATCH] Bluetooth node manager causes up to ~3.25s delay in freezing tasks.

Hi all.

The bluetooth nodemanager function "nodemgr_host_thread" contains a loop
that calls try_to_freeze near the top of the loop, but then delays for
up to 3.25 seconds (plus time to do work) before getting back to the top
of the loop. When starting a cycle post-boot, this doesn't seem to bite,
but it is causing a noticeable delay at boot time, when freezing
processes prior to starting to read the image.

The following patch adds invocation of try_to_freeze to the subloops
that are used in the body of this function. With these additions, the
time to freeze when starting to resume at boot time is virtually zero.
I'm no expert on bluetooth, and so don't know that we shouldn't check
the return value and jump back to the top of the loop or such like after
being frozen, but I submit it for your consideration.

Signed-off-by: Nigel Cunningham <[email protected]>

nodemgr.c | 2 ++
1 file changed, 2 insertions(+)
diff -ruNp 710-nodemanager-freezing.patch-old/drivers/ieee1394/nodemgr.c 710-nodemanager-freezing.patch-new/drivers/ieee1394/nodemgr.c
--- 710-nodemanager-freezing.patch-old/drivers/ieee1394/nodemgr.c 2008-12-06 08:42:08.000000000 +1100
+++ 710-nodemanager-freezing.patch-new/drivers/ieee1394/nodemgr.c 2008-12-09 18:49:26.000000000 +1100
@@ -1685,6 +1685,7 @@ static int nodemgr_host_thread(void *dat
g = get_hpsb_generation(host);
for (i = 0; i < 4 ; i++) {
msleep_interruptible(63);
+ try_to_freeze();
if (kthread_should_stop())
goto exit;

@@ -1725,6 +1726,7 @@ static int nodemgr_host_thread(void *dat
/* Sleep 3 seconds */
for (i = 3000/200; i; i--) {
msleep_interruptible(200);
+ try_to_freeze();
if (kthread_should_stop())
goto exit;

2008-12-09 11:24:20

by Marcel Holtmann

Subject: Re: [PATCH] Bluetooth node manager causes up to ~3.25s delay in freezing tasks.

Hi Nigel,

> The bluetooth nodemanager function "nodemgr_host_thread" contains a loop
> that calls try_to_freeze near the top of the loop, but then delays for
> up to 3.25 seconds (plus time to do work) before getting back to the top
> of the loop. When starting a cycle post-boot, this doesn't seem to bite,
> but it is causing a noticeable delay at boot time, when freezing
> processes prior to starting to read the image.

I don't wanna disappoint you, but IEEE1394 is actually Firewire and not
Bluetooth :)

Regards

Marcel

2008-12-09 11:36:52

by Nigel Cunningham

Subject: Re: [PATCH] Bluetooth node manager causes up to ~3.25s delay in freezing tasks.

Hi.

On Tue, 2008-12-09 at 12:24 +0100, Marcel Holtmann wrote:
> Hi Nigel,
>
> > The bluetooth nodemanager function "nodemgr_host_thread" contains a loop
> > that calls try_to_freeze near the top of the loop, but then delays for
> > up to 3.25 seconds (plus time to do work) before getting back to the top
> > of the loop. When starting a cycle post-boot, this doesn't seem to bite,
> > but it is causing a noticeable delay at boot time, when freezing
> > processes prior to starting to read the image.
>
> I don't wanna disappoint you, but IEEE1394 is actually Firewire and not
> Bluetooth :)

Aww. Sorry. All these newfangled technologies confuse an old-timer like
me. Oh, wait. I'm not even 40 yet.

I'll try the right list this time, I hope!

Nigel