2009-01-08 19:51:29

by Randy Dunlap

[permalink] [raw]
Subject: [PATCH] regulator: fix kernel-doc warnings

From: Randy Dunlap <[email protected]>

Fix kernel-doc warnings in regulator/driver.h:

Warning(linux-next-20090108//include/linux/regulator/driver.h:95): Excess struct/union/enum/typedef member 'set_current' description in 'regulator_ops'
Warning(linux-next-20090108//include/linux/regulator/driver.h:95): Excess struct/union/enum/typedef member 'get_current' description in 'regulator_ops'
Warning(linux-next-20090108//include/linux/regulator/driver.h:124): No description found for parameter 'irq'

Signed-off-by: Randy Dunlap <[email protected]>
cc: Liam Girdwood <[email protected]>
cc: Mark Brown <[email protected]>
---
include/linux/regulator/driver.h | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)

--- linux-next-20090108.orig/include/linux/regulator/driver.h
+++ linux-next-20090108/include/linux/regulator/driver.h
@@ -29,16 +29,12 @@ struct regulator_init_data;
*
* @enable: Enable the regulator.
* @disable: Disable the regulator.
- * @is_enabled: Return 1 if the reguator is enabled, 0 otherwise.
+ * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise.
*
* @set_voltage: Set the voltage for the regulator within the range specified.
* The driver should select the voltage closest to min_uV.
* @get_voltage: Return the currently configured voltage for the regulator.
*
- * @set_current: Set the current for the regulator within the range specified.
- * The driver should select the current closest to min_uA.
- * @get_current: Return the currently configured current for the regulator.
- *
* @set_current_limit: Configure a limit for a current-limited regulator.
* @get_current_limit: Get the limit for a current-limited regulator.
*
@@ -111,6 +107,7 @@ enum regulator_type {
* @name: Identifying name for the regulator.
* @id: Numerical identifier for the regulator.
* @ops: Regulator operations table.
+ * @irq: Interrupt number for the regulator.
* @type: Indicates if the regulator is a voltage or current regulator.
* @owner: Module providing the regulator, used for refcounting.
*/


2009-01-08 20:15:01

by Liam Girdwood

[permalink] [raw]
Subject: Re: [PATCH] regulator: fix kernel-doc warnings

On Thu, 2009-01-08 at 11:50 -0800, Randy Dunlap wrote:
> From: Randy Dunlap <[email protected]>
>
> Fix kernel-doc warnings in regulator/driver.h:
>
> Warning(linux-next-20090108//include/linux/regulator/driver.h:95): Excess struct/union/enum/typedef member 'set_current' description in 'regulator_ops'
> Warning(linux-next-20090108//include/linux/regulator/driver.h:95): Excess struct/union/enum/typedef member 'get_current' description in 'regulator_ops'
> Warning(linux-next-20090108//include/linux/regulator/driver.h:124): No description found for parameter 'irq'
>
> Signed-off-by: Randy Dunlap <[email protected]>
> cc: Liam Girdwood <[email protected]>
> cc: Mark Brown <[email protected]>
> -

Applied.

Thanks

Liam