Linux version 2.6.30-01557-gb640f04 (root@prometheus) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.1, pie-10.1.5) ) #1 SMP Thu Jun 11 21:35:58 BST 2009
Command line: root=/dev/sda3 mce=bootlog reboot=acpi,warm pcie_aspm=force 3w-9xxx.use_msi=1
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000097de0000 (usable)
BIOS-e820: 0000000097de0000 - 0000000097dea000 (ACPI data)
BIOS-e820: 0000000097dea000 - 0000000097deb000 (ACPI NVS)
BIOS-e820: 0000000097deb000 - 0000000098000000 (reserved)
BIOS-e820: 000000009c000000 - 00000000a0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000868000000 (usable)
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x868000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFF0000000 write-back
2 base 000090000000 mask FFFFF8000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000868000000 aka 34432M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000098000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x97de0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-0000000097de0000
Using GB pages for direct mapping
0000000000 - 0080000000 page 1G
0080000000 - 0097c00000 page 2M
0097c00000 - 0097de0000 page 4k
kernel direct mapping tables up to 97de0000 @ 10000-13000
init_memory_mapping: 0000000100000000-0000000868000000
Using GB pages for direct mapping
0100000000 - 0840000000 page 1G
0840000000 - 0868000000 page 2M
kernel direct mapping tables up to 868000000 @ 12000-14000
ACPI: RSDP 00000000000f7910 00024 (v02 PTLTD )
ACPI: XSDT 0000000097de2a70 00064 (v01 PTLTD XSDT 06040000 LTP 00000000)
ACPI: FACP 0000000097de87c2 000F4 (v03 NVIDIA CK8S 06040000 PTL_ 000F4240)
ACPI: DSDT 0000000097de2ad4 05C7A (v01 NVIDIA CK8 06040000 MSFT 03000000)
ACPI: FACS 0000000097deafc0 00040
ACPI: SSDT 0000000097de88b6 0143C (v01 AMD POWERNOW 06040000 AMD 00000001)
ACPI: SRAT 0000000097de9cf2 00150 (v01 AMD FAM_F_10 06040000 AMD 00000001)
ACPI: SPCR 0000000097de9e42 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
ACPI: MCFG 0000000097de9e92 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 0000000097de9ece 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: APIC 0000000097de9f06 000D2 (v01 PTLTD APIC 06040000 LTP 00000000)
ACPI: BOOT 0000000097de9fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 1 -> APIC 4 -> Node 1
SRAT: PXM 1 -> APIC 5 -> Node 1
SRAT: PXM 1 -> APIC 6 -> Node 1
SRAT: PXM 1 -> APIC 7 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-98000000
SRAT: Node 0 PXM 0 100000000-468000000
SRAT: Node 1 PXM 1 468000000-868000000
NUMA: Allocated memnodemap from 13000 - 23d40
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000468000000
NODE_DATA [0000000000023d40 - 0000000000025d3f]
bootmap [0000000000100000 - 000000000018cfff] pages 8d
(8 early reservations) ==> bootmem [0000000000 - 0468000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001612b20] TEXT DATA BSS ==> [0001000000 - 0001612b20]
#3 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000]
#4 [0001613000 - 0001613160] BRK ==> [0001613000 - 0001613160]
#5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#6 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000]
#7 [0000013000 - 0000023d40] MEMNODEMAP ==> [0000013000 - 0000023d40]
Bootmem setup node 1 0000000468000000-0000000868000000
NODE_DATA [0000000468000000 - 0000000468001fff]
bootmap [0000000468002000 - 0000000468081fff] pages 80
(8 early reservations) ==> bootmem [0468000000 - 0868000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0001612b20] TEXT DATA BSS
#3 [000009cc00 - 0000100000] BIOS reserved
#4 [0001613000 - 0001613160] BRK
#5 [0000010000 - 0000012000] PGTABLE
#6 [0000012000 - 0000013000] PGTABLE
#7 [0000013000 - 0000023d40] MEMNODEMAP
[ffffea000f6c0000-ffffea000f7fffff] potential offnode page_structs
[ffffea0000000000-ffffea000f7fffff] PMD -> [ffff880028600000-ffff8800367fffff] on node 0
[ffffea000f800000-ffffea001d7fffff] PMD -> [ffff880468200000-ffff8804761fffff] on node 1
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00868000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009c
0: 0x00000100 -> 0x00097de0
0: 0x00100000 -> 0x00468000
1: 0x00468000 -> 0x00868000
On node 0 totalpages: 4193644
DMA zone: 56 pages used for memmap
DMA zone: 121 pages reserved
DMA zone: 3803 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 603672 pages, LIFO batch:31
Normal zone: 48832 pages used for memmap
Normal zone: 3522880 pages, LIFO batch:31
On node 1 totalpages: 4194304
Normal zone: 57344 pages used for memmap
Normal zone: 4136960 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xc2000000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 17, address 0xc2000000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:2
PERCPU: Allocated 17 4k pages, static data 66848 bytes
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 8267315
Policy zone: Normal
Kernel command line: root=/dev/sda3 mce=bootlog reboot=acpi,warm pcie_aspm=force 3w-9xxx.use_msi=1
PCIe ASPM is forcedly enabled
PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Node 0: aperture @ 9c000000 size 64 MB
Node 1: aperture @ 9c000000 size 64 MB
Memory: 33083744k/35258368k available (3622k kernel code, 1706576k absent, 468048k reserved, 1606k data, 456k init)
------------[ cut here ]------------
WARNING: at kernel/smp.c:369 smp_call_function_many+0x52/0x1b3()
Hardware name: MCP55
Pid: 0, comm: swapper Not tainted 2.6.30-01557-gb640f04 #1
Call Trace:
[<ffffffff81086aec>] ? cache_grow+0x1e3/0x237
[<ffffffff810576db>] ? smp_call_function_many+0x52/0x1b3
[<ffffffff810374f6>] warn_slowpath_common+0x72/0x9f
[<ffffffff81037532>] warn_slowpath_null+0xf/0x11
[<ffffffff810576db>] smp_call_function_many+0x52/0x1b3
[<ffffffff810851aa>] ? do_ccupdate_local+0x0/0x2f
[<ffffffff810851aa>] ? do_ccupdate_local+0x0/0x2f
[<ffffffff8105785c>] smp_call_function+0x20/0x24
[<ffffffff8103b9df>] on_each_cpu+0x18/0x2d
[<ffffffff8108707c>] do_tune_cpucache+0xf3/0x45a
[<ffffffff81087585>] enable_cpucache+0x63/0xaf
[<ffffffff8154126f>] kmem_cache_init+0x401/0x45d
[<ffffffff81539f3a>] ? mem_init+0x156/0x161
[<ffffffff8152da5b>] start_kernel+0x1a6/0x2b8
[<ffffffff8152d270>] x86_64_start_reservations+0x80/0x84
[<ffffffff8152d355>] x86_64_start_kernel+0xe1/0xe8
---[ end trace 4eaa2a86a8e2da22 ]---
start_kernel(): bug: interrupts were enabled *very* early, fixing it
NR_IRQS:4352 nr_irqs:880
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2200.110 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4401.55 BogoMIPS (lpj=7333690)
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0x0 -> Node 0
tseg: 0097e00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
Freeing SMP alternatives: 32k freed
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4406.80 BogoMIPS (lpj=7340495)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4405.68 BogoMIPS (lpj=7340300)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 2/0x2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4404.27 BogoMIPS (lpj=7338043)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 3/0x3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Booting processor 4 APIC 0x4 ip 0x6000
Initializing CPU#4
Calibrating delay using timer specific routine.. 4401.92 BogoMIPS (lpj=7332676)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 4/0x4 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
CPU4: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03
checking TSC synchronization [CPU#0 -> CPU#4]: passed.
Booting processor 5 APIC 0x5 ip 0x6000
Initializing CPU#5
Calibrating delay using timer specific routine.. 4401.53 BogoMIPS (lpj=7333657)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 5/0x5 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
CPU5: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03
checking TSC synchronization [CPU#0 -> CPU#5]: passed.
Booting processor 6 APIC 0x6 ip 0x6000
Initializing CPU#6
Calibrating delay using timer specific routine.. 4401.39 BogoMIPS (lpj=7333427)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 6/0x6 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
CPU6: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03
checking TSC synchronization [CPU#0 -> CPU#6]: passed.
Booting processor 7 APIC 0x7 ip 0x6000
Initializing CPU#7
Calibrating delay using timer specific routine.. 4401.39 BogoMIPS (lpj=7333433)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 7/0x7 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
CPU7: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03
checking TSC synchronization [CPU#0 -> CPU#7]: passed.
Brought up 8 CPUs
Total of 8 processors activated (35225.57 BogoMIPS).
net_namespace: 896 bytes
NET: Registered protocol family 16
node 0 link 2: io port [1000, 4fff]
node 1 link 0: io port [5000, 6fff]
node 1 link 0: io port [f000, ffff]
TOM: 0000000098000000 aka 2432M
Fam 10h mmconf [e0000000, efffffff]
node 0 link 2: mmio [a0000000, c1ffffff]
node 1 link 0: mmio [c2000000, cfffffff]
node 0 link 2: mmio [a0000, bffff]
node 0 link 2: mmio [e0000000, e7ffffff] ==> none
node 1 link 0: mmio [e8000000, efffffff] ==> none
TOM2: 0000000868000000 aka 34432M
bus: [00,7f] on node 0 link 2
bus: 00 index 0 io port: [0, 4fff]
bus: 00 index 1 io port: [7000, efff]
bus: 00 index 2 mmio: [98000000, c1ffffff]
bus: 00 index 3 mmio: [a0000, bffff]
bus: 00 index 4 mmio: [f0000000, ffffffff]
bus: 00 index 5 mmio: [d0000000, dfffffff]
bus: 00 index 6 mmio: [868000000, fcffffffff]
bus: [80,ff] on node 1 link 0
bus: 80 index 0 io port: [5000, 6fff]
bus: 80 index 1 io port: [f000, ffff]
bus: 80 index 2 mmio: [c2000000, cfffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 131
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e83fffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: reg 10 io port: [0x1c00-0x1c7f]
pci 0000:00:01.1: reg 10 io port: [0x2000-0x203f]
pci 0000:00:01.1: reg 20 io port: [0x2440-0x247f]
pci 0000:00:01.1: reg 24 io port: [0x2400-0x243f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xa0004000-0xa0004fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xa0005000-0xa00050ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: reg 20 io port: [0x2480-0x248f]
pci 0000:00:05.0: reg 10 io port: [0x24d0-0x24d7]
pci 0000:00:05.0: reg 14 io port: [0x24c4-0x24c7]
pci 0000:00:05.0: reg 18 io port: [0x24c8-0x24cf]
pci 0000:00:05.0: reg 1c io port: [0x24c0-0x24c3]
pci 0000:00:05.0: reg 20 io port: [0x2490-0x249f]
pci 0000:00:05.0: reg 24 32bit mmio: [0xa0006000-0xa0006fff]
pci 0000:00:05.1: reg 10 io port: [0x24e8-0x24ef]
pci 0000:00:05.1: reg 14 io port: [0x24dc-0x24df]
pci 0000:00:05.1: reg 18 io port: [0x24e0-0x24e7]
pci 0000:00:05.1: reg 1c io port: [0x24d8-0x24db]
pci 0000:00:05.1: reg 20 io port: [0x24a0-0x24af]
pci 0000:00:05.1: reg 24 32bit mmio: [0xa0007000-0xa0007fff]
pci 0000:00:05.2: reg 10 io port: [0x2800-0x2807]
pci 0000:00:05.2: reg 14 io port: [0x24f4-0x24f7]
pci 0000:00:05.2: reg 18 io port: [0x24f8-0x24ff]
pci 0000:00:05.2: reg 1c io port: [0x24f0-0x24f3]
pci 0000:00:05.2: reg 20 io port: [0x24b0-0x24bf]
pci 0000:00:05.2: reg 24 32bit mmio: [0xa0008000-0xa0008fff]
pci 0000:00:06.1: reg 10 32bit mmio: [0xa0000000-0xa0003fff]
pci 0000:00:06.1: PME# supported from D3hot D3cold
pci 0000:00:06.1: PME# disabled
pci 0000:00:08.0: reg 10 32bit mmio: [0xa0009000-0xa0009fff]
pci 0000:00:08.0: reg 14 io port: [0x2808-0x280f]
pci 0000:00:08.0: reg 18 32bit mmio: [0xa0005800-0xa00058ff]
pci 0000:00:08.0: reg 1c 32bit mmio: [0xa0005400-0xa000540f]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: reg 10 32bit mmio: [0xa000b000-0xa000bfff]
pci 0000:00:09.0: reg 14 io port: [0x2810-0x2817]
pci 0000:00:09.0: reg 18 32bit mmio: [0xa000a000-0xa000a0ff]
pci 0000:00:09.0: reg 1c 32bit mmio: [0xa0005c00-0xa0005c0f]
pci 0000:00:09.0: supports D1 D2
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: PME# disabled
pci 0000:01:05.0: reg 10 32bit mmio: [0xa0104000-0xa01047ff]
pci 0000:01:05.0: reg 14 32bit mmio: [0xa0100000-0xa0103fff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:05.0: PME# disabled
pci 0000:00:06.0: transparent bridge
pci 0000:00:06.0: bridge 32bit mmio: [0xa0100000-0xa01fffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xb0000000-0xbfffffff]
pci 0000:02:00.0: reg 18 64bit mmio: [0xa0200000-0xa020ffff]
pci 0000:02:00.0: reg 20 io port: [0x3000-0x30ff]
pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: reg 10 64bit mmio: [0xa0210000-0xa021ffff]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:0a.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:0a.0: bridge 32bit mmio: [0xa0200000-0xa02fffff]
pci 0000:00:0a.0: bridge 64bit mmio pref: [0xb0000000-0xbfffffff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: reg 10 64bit mmio: [0xa0300000-0xa030007f]
pci 0000:03:00.1: supports D1
pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.1: PME# disabled
pci 0000:00:0d.0: bridge io port: [0x4000-0x4fff]
pci 0000:00:0d.0: bridge 32bit mmio: [0xa0300000-0xa04fffff]
pci 0000:00:0d.0: bridge 64bit mmio pref: [0xc0000000-0xc1ffffff]
pci 0000:04:09.0: reg 10 64bit mmio: [0xc0000000-0xc1ffffff]
pci 0000:04:09.0: reg 18 64bit mmio: [0xa0400000-0xa0400fff]
pci 0000:04:09.0: reg 20 io port: [0x4000-0x403f]
pci 0000:04:09.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:04:09.0: supports D1 D2
pci 0000:03:00.0: bridge io port: [0x4000-0x4fff]
pci 0000:03:00.0: bridge 32bit mmio: [0xa0400000-0xa04fffff]
pci 0000:03:00.0: bridge 64bit mmio pref: [0xc0000000-0xc1ffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2.NECA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR5._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:80)
pci 0000:80:01.0: reg 10 io port: [0xfc00-0xfc7f]
pci 0000:80:01.0: reg 14 32bit mmio: [0xc2000000-0xc2000fff]
pci 0000:80:01.1: reg 10 io port: [0x5000-0x503f]
pci 0000:80:01.1: reg 20 io port: [0x5440-0x547f]
pci 0000:80:01.1: reg 24 io port: [0x5400-0x543f]
pci 0000:80:01.1: PME# supported from D3hot D3cold
pci 0000:80:01.1: PME# disabled
pci 0000:80:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:0a.0: PME# disabled
pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:0d.0: PME# disabled
pci 0000:80:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:0f.0: PME# disabled
pci 0000:80:0a.0: bridge io port: [0x6000-0x6fff]
pci 0000:82:04.0: reg 10 io port: [0x6000-0x60ff]
pci 0000:82:04.0: supports D1 D2
pci 0000:81:00.0: bridge io port: [0x6000-0x6fff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR5._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMA2] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *7
ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSI2] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LK1E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LMA2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LUS2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LSI1] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LSI2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 9c000000 size 65536 KB
init_memory_mapping: 000000009c000000-00000000a0000000
009c000000 - 00a0000000 page 2M
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 4
Switched to high resolution mode on CPU 7
Switched to high resolution mode on CPU 5
Switched to high resolution mode on CPU 6
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:00: iomem range 0xfed00000-0xfed00fff has been reserved
system 00:03: iomem range 0xa0040000-0xa0047fff has been reserved
system 00:04: ioport range 0x1000-0x107f has been reserved
system 00:04: ioport range 0x1080-0x10ff has been reserved
system 00:04: ioport range 0x1400-0x147f has been reserved
system 00:04: ioport range 0x1480-0x14ff has been reserved
system 00:04: ioport range 0x1800-0x187f has been reserved
system 00:04: ioport range 0x1880-0x18ff has been reserved
system 00:04: ioport range 0x2440-0x247f has been reserved
system 00:04: ioport range 0x2400-0x243f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x600-0x6fe has been reserved
system 00:07: ioport range 0xc05-0xc06 has been reserved
system 00:0f: iomem range 0xc2040000-0xc2047fff has been reserved
system 00:10: ioport range 0xf000-0xf07f has been reserved
system 00:10: ioport range 0xf080-0xf0ff has been reserved
system 00:10: ioport range 0xf400-0xf47f has been reserved
system 00:10: ioport range 0xf480-0xf4ff has been reserved
system 00:10: ioport range 0xf800-0xf87f has been reserved
system 00:10: ioport range 0xf880-0xf8ff has been reserved
pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
pci 0000:00:06.0: IO window: disabled
pci 0000:00:06.0: MEM window: 0xa0100000-0xa01fffff
pci 0000:00:06.0: PREFETCH window: disabled
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0a.0: IO window: 0x3000-0x3fff
pci 0000:00:0a.0: MEM window: 0xa0200000-0xa02fffff
pci 0000:00:0a.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff
pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
pci 0000:03:00.0: IO window: 0x4000-0x4fff
pci 0000:03:00.0: MEM window: 0xa0400000-0xa04fffff
pci 0000:03:00.0: PREFETCH window: 0x000000c0000000-0x000000c1ffffff
pci 0000:03:00.1: PCI bridge, secondary bus 0000:05
pci 0000:03:00.1: IO window: disabled
pci 0000:03:00.1: MEM window: disabled
pci 0000:03:00.1: PREFETCH window: disabled
pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0d.0: IO window: 0x4000-0x4fff
pci 0000:00:0d.0: MEM window: 0xa0300000-0xa04fffff
pci 0000:00:0d.0: PREFETCH window: 0x000000c0000000-0x000000c1ffffff
pci 0000:00:0f.0: PCI bridge, secondary bus 0000:06
pci 0000:00:0f.0: IO window: disabled
pci 0000:00:0f.0: MEM window: disabled
pci 0000:00:0f.0: PREFETCH window: disabled
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:03:00.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 23
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
pci 0000:03:00.1: PCI INT A -> Link[LK4E] -> GSI 23 (level, low) -> IRQ 23
pci 0000:03:00.1: setting latency timer to 64
pci 0000:00:0f.0: setting latency timer to 64
pci 0000:81:00.0: PCI bridge, secondary bus 0000:82
pci 0000:81:00.0: IO window: 0x6000-0x6fff
pci 0000:81:00.0: MEM window: disabled
pci 0000:81:00.0: PREFETCH window: disabled
pci 0000:80:0a.0: PCI bridge, secondary bus 0000:81
pci 0000:80:0a.0: IO window: 0x6000-0x6fff
pci 0000:80:0a.0: MEM window: disabled
pci 0000:80:0a.0: PREFETCH window: disabled
pci 0000:80:0d.0: PCI bridge, secondary bus 0000:83
pci 0000:80:0d.0: IO window: disabled
pci 0000:80:0d.0: MEM window: disabled
pci 0000:80:0d.0: PREFETCH window: disabled
pci 0000:80:0f.0: PCI bridge, secondary bus 0000:84
pci 0000:80:0f.0: IO window: disabled
pci 0000:80:0f.0: MEM window: disabled
pci 0000:80:0f.0: PREFETCH window: disabled
pci 0000:80:0a.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 47
alloc irq_desc for 47 on node 1
alloc kstat_irqs on node 1
pci 0000:81:00.0: PCI INT A -> Link[LK3E] -> GSI 47 (level, high) -> IRQ 47
pci 0000:81:00.0: setting latency timer to 64
pci 0000:80:0d.0: setting latency timer to 64
pci 0000:80:0f.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0x4fff]
pci_bus 0000:00: resource 1 io: [0x7000-0xefff]
pci_bus 0000:00: resource 2 mem: [0x98000000-0xc1ffffff]
pci_bus 0000:00: resource 3 mem: [0x0a0000-0x0bffff]
pci_bus 0000:00: resource 4 mem: [0xf0000000-0xffffffff]
pci_bus 0000:00: resource 5 mem: [0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 6 mem: [0x868000000-0xfcffffffff]
pci_bus 0000:01: resource 1 mem: [0xa0100000-0xa01fffff]
pci_bus 0000:01: resource 3 io: [0x00-0x4fff]
pci_bus 0000:01: resource 4 io: [0x7000-0xefff]
pci_bus 0000:01: resource 5 mem: [0x98000000-0xc1ffffff]
pci_bus 0000:01: resource 6 mem: [0x0a0000-0x0bffff]
pci_bus 0000:01: resource 7 mem: [0xf0000000-0xffffffff]
pci_bus 0000:01: resource 8 mem: [0xd0000000-0xdfffffff]
pci_bus 0000:01: resource 9 mem: [0x868000000-0xfcffffffff]
pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xa0200000-0xa02fffff]
pci_bus 0000:02: resource 2 pref mem [0xb0000000-0xbfffffff]
pci_bus 0000:03: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:03: resource 1 mem: [0xa0300000-0xa04fffff]
pci_bus 0000:03: resource 2 pref mem [0xc0000000-0xc1ffffff]
pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:04: resource 1 mem: [0xa0400000-0xa04fffff]
pci_bus 0000:04: resource 2 pref mem [0xc0000000-0xc1ffffff]
pci_bus 0000:80: resource 0 io: [0x5000-0x6fff]
pci_bus 0000:80: resource 1 io: [0xf000-0xffff]
pci_bus 0000:80: resource 2 mem: [0xc2000000-0xcfffffff]
pci_bus 0000:81: resource 0 io: [0x6000-0x6fff]
pci_bus 0000:82: resource 0 io: [0x6000-0x6fff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0x37 set to 0x80
microcode: CPU0: patch_level=0x1000095
microcode: CPU1: patch_level=0x1000095
microcode: CPU2: patch_level=0x1000095
microcode: CPU3: patch_level=0x1000095
microcode: CPU4: patch_level=0x1000095
microcode: CPU5: patch_level=0x1000095
microcode: CPU6: patch_level=0x1000095
microcode: CPU7: patch_level=0x1000095
Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
fuse init (API version 7.11)
msgmni has been set to 32768
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
pci 0000:80:00.0: Found enabled HT MSI Mapping
pci 0000:80:00.0: Found enabled HT MSI Mapping
pci 0000:80:00.0: Found enabled HT MSI Mapping
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:0a.0: irq 48 for MSI/MSI-X
pcieport-driver 0000:00:0a.0: setting latency timer to 64
alloc irq_desc for 49 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:0d.0: irq 49 for MSI/MSI-X
pcieport-driver 0000:00:0d.0: setting latency timer to 64
alloc irq_desc for 50 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:0f.0: irq 50 for MSI/MSI-X
pcieport-driver 0000:00:0f.0: setting latency timer to 64
alloc irq_desc for 51 on node 1
alloc kstat_irqs on node 1
pcieport-driver 0000:80:0a.0: irq 51 for MSI/MSI-X
pcieport-driver 0000:80:0a.0: setting latency timer to 64
alloc irq_desc for 52 on node 1
alloc kstat_irqs on node 1
pcieport-driver 0000:80:0d.0: irq 52 for MSI/MSI-X
pcieport-driver 0000:80:0d.0: setting latency timer to 64
alloc irq_desc for 53 on node 1
alloc kstat_irqs on node 1
pcieport-driver 0000:80:0f.0: irq 53 for MSI/MSI-X
pcieport-driver 0000:80:0f.0: setting latency timer to 64
aer 0000:00:0a.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0d.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0f.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:80:0a.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:80:0d.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:80:0f.0:pcie02: AER service couldn't init device: no _OSC support
radeonfb_pci_register BEGIN
ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 22
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
radeonfb 0000:02:00.0: PCI INT A -> Link[LK3E] -> GSI 22 (level, low) -> IRQ 22
radeonfb (0000:02:00.0): Found 262144k of DDR 128 bits wide videoram
radeonfb (0000:02:00.0): mapped 16384k videoram
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=400.00 Mhz, System=250.00 MHz
radeonfb: PLL min 20000 max 40000
radeonfb 0000:02:00.0: I2C bus monid registered.
radeonfb 0000:02:00.0: I2C bus dvi registered.
radeonfb 0000:02:00.0: I2C bus vga registered.
radeonfb 0000:02:00.0: I2C bus crt2 registered.
1 chips in connector info
- chip 1 has 2 connectors
* connector 0 of type 3 (DVI-I) : 3221
* connector 1 of type 3 (DVI-I) : 3310
Starting monitor auto detection...
i2c-adapter i2c-0: unable to read EDID block.
i2c-adapter i2c-0: unable to read EDID block.
i2c-adapter i2c-0: unable to read EDID block.
radeonfb: I2C (port 1) ... not found
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
radeonfb: I2C (port 2) ... not found
radeonfb: I2C (port 3) ... found CRT display
radeonfb: I2C (port 4) ... not found
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
radeonfb: I2C (port 2) ... not found
radeonfb: I2C (port 4) ... not found
radeonfb: I2C (port 3) ... found CRT display
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
hStart = 1430, hEnd = 1542, hTotal = 1792
vStart = 771, vEnd = 777, vTotal = 795
h_total_disp = 0xa900df hsync_strt_wid = 0xe05a0
v_total_disp = 0x2ff031a vsync_strt_wid = 0x60302
pixclock = 11695
freq = 8550
freq = 8550, PLL min = 20000, PLL max = 40000
ref_div = 12, ref_clk = 2700, output_freq = 34200
ref_div = 12, ref_clk = 2700, output_freq = 34200
post div = 0x2
fb_div = 0x98
ppll_div_3 = 0x20098
Console: switching to colour frame buffer device 170x48
radeonfb (0000:02:00.0): ATI Radeon 5b62 "[b"
radeonfb_pci_register END
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
processor ACPI_CPU:01: registered as cooling_device1
processor ACPI_CPU:02: registered as cooling_device2
processor ACPI_CPU:03: registered as cooling_device3
processor ACPI_CPU:04: registered as cooling_device4
processor ACPI_CPU:05: registered as cooling_device5
processor ACPI_CPU:06: registered as cooling_device6
processor ACPI_CPU:07: registered as cooling_device7
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
radeonfb 0000:02:00.0: setting latency timer to 64
[drm] Initialized radeon 1.30.0 20080528 for 0000:02:00.0 on minor 0
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
loop: module loaded
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 21
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
3w-9xxx 0000:04:09.0: PCI INT A -> Link[LNK4] -> GSI 21 (level, low) -> IRQ 21
3w-9xxx: scsi0: AEN: INFO (0x04:0x0055): Battery charging started:.
3w-9xxx: scsi0: AEN: INFO (0x04:0x0056): Battery charging completed:.
scsi0 : 3ware 9000 Storage Controller
3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xa0400000, IRQ: 21.
3w-9xxx: scsi0: Firmware FE9X 3.08.00.029, BIOS BE9X 3.10.00.003, Ports: 8.
alloc irq_desc for 54 on node 0
alloc kstat_irqs on node 0
3w-9xxx 0000:04:09.0: irq 54 for MSI/MSI-X
Driver 'sd' needs updating - please use bus_type methods
scsi 0:0:0:0: Direct-Access AMCC 9550SXU-8L DISK 3.08 PQ: 0 ANSI: 5
Driver 'sr' needs updating - please use bus_type methods
sata_nv 0000:00:05.0: version 3.5
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
sata_nv 0000:00:05.0: PCI INT A -> Link[LTID] -> GSI 20 (level, low) -> IRQ 20
sd 0:0:0:0: Attached scsi generic sg0 type 0
sata_nv 0000:00:05.0: Using SWNCQ mode
sata_nv 0000:00:05.0: setting latency timer to 64
scsi1 : sata_nv
sd 0:0:0:0: [sda] 7324108800 512-byte hardware sectors: (3.74 TB/3.41 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
sda:<6>scsi2 : sata_nv
ata1: SATA max UDMA/133 cmd 0x24d0 ctl 0x24c4 bmdma 0x2490 irq 20
ata2: SATA max UDMA/133 cmd 0x24c8 ctl 0x24c0 bmdma 0x2498 irq 20
ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 19
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
sata_nv 0000:00:05.1: PCI INT B -> Link[LSI1] -> GSI 19 (level, low) -> IRQ 19
sata_nv 0000:00:05.1: Using SWNCQ mode
sata_nv 0000:00:05.1: setting latency timer to 64
scsi3 : sata_nv
scsi4 : sata_nv
ata3: SATA max UDMA/133 cmd 0x24e8 ctl 0x24dc bmdma 0x24a0 irq 19
ata4: SATA max UDMA/133 cmd 0x24e0 ctl 0x24d8 bmdma 0x24a8 irq 19
ata3: SATA link down (SStatus 0 SControl 300)
sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt Link [LSI2] enabled at IRQ 18
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
sata_nv 0000:00:05.2: PCI INT C -> Link[LSI2] -> GSI 18 (level, low) -> IRQ 18
sata_nv 0000:00:05.2: Using SWNCQ mode
sata_nv 0000:00:05.2: setting latency timer to 64
scsi5 : sata_nv
scsi6 : sata_nv
ata5: SATA max UDMA/133 cmd 0x2800 ctl 0x24f4 bmdma 0x24b0 irq 18
ata6: SATA max UDMA/133 cmd 0x24f8 ctl 0x24f0 bmdma 0x24b8 irq 18
pata_amd 0000:00:04.0: version 0.4.1
pata_amd 0000:00:04.0: setting latency timer to 64
scsi7 : pata_amd
scsi8 : pata_amd
ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2480 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2488 irq 15
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 17
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 17 (level, low) -> IRQ 17
forcedeth 0000:00:08.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: HL-DT-ST BD-RE GGW-H20L, YL02, max UDMA/133
ata1.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM HL-DT-ST BD-RE GGW-H20L YL02 PQ: 0 ANSI: 5
ata7.00: ATAPI: LS-120 CSMO 05 UHD Floppy, 0512C301, max PIO2
ata7: nv_mode_filter: 0x7&0xfffff->0x7, BIOS=0x0 (0xc700) ACPI=0x0
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
ata7.00: configured for PIO2
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 7:0:0:0: Direct-Access MITBISHI LS-120 COSM 05 0512 PQ: 0 ANSI: 5
sd 7:0:0:0: Attached scsi generic sg2 type 0
ata8: port disabled. ignoring.
sd 7:0:0:0: [sdb] Attached SCSI removable disk
forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 0, addr 00:e0:81:b1:0a:34
forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [LMA2] enabled at IRQ 16
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
forcedeth 0000:00:09.0: PCI INT A -> Link[LMA2] -> GSI 16 (level, low) -> IRQ 16
forcedeth 0000:00:09.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:e0:81:b1:0a:35
forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 23
firewire_ohci 0000:01:05.0: PCI INT A -> Link[LNK1] -> GSI 23 (level, low) -> IRQ 23
firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI version 1.10
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xa0005000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 21, io mem 0xa0004000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
usb 1-5: new high speed USB device using ehci_hcd and address 2
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input2
i2c /dev entries driver
i2c-adapter i2c-4: nForce2 SMBus adapter at 0x2440
i2c-adapter i2c-5: nForce2 SMBus adapter at 0x2400
i2c-adapter i2c-6: nForce2 SMBus adapter at 0x5440
i2c-adapter i2c-7: nForce2 SMBus adapter at 0x5400
smsc47b397: found SMSC SCH5307-NS (base address 0x0680, revision 0)
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
EDAC MC: Ver: 2.1.0 Jun 11 2009
EDAC amd64_edac: Ver: 3.2.0 Jun 11 2009
EDAC amd64: ECC is enabled by BIOS, Proceeding with EDAC module initialization
amd64_edac: probe of 0000:00:18.2 failed with error -22
EDAC amd64: ECC is enabled by BIOS, Proceeding with EDAC module initialization
amd64_edac: probe of 0000:00:19.2 failed with error -22
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.20.
AV200 0000:82:04.0: PCI INT A -> Link[LK3E] -> GSI 47 (level, high) -> IRQ 47
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
firewire_core: created device fw0: GUID 00e081000028340f, S400
usb 1-5.4: new full speed USB device using ehci_hcd and address 3
usb 1-5.4: configuration #1 chosen from 1 choice
hub 1-5.4:1.0: USB hub found
hub 1-5.4:1.0: 3 ports detected
ALSA device list:
#0: Asus Virtuoso 200 (rev 2) at 0x6000, irq 47
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
powernow-k8: Found 2 Quad-Core AMD Opteron(tm) Processor 2354 processors (8 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2200 MHz)
powernow-k8: 1 : pstate 1 (2000 MHz)
powernow-k8: 2 : pstate 2 (1700 MHz)
powernow-k8: 3 : pstate 3 (1400 MHz)
powernow-k8: 4 : pstate 4 (1100 MHz)
powernow-k8: 0 : pstate 0 (2200 MHz)
powernow-k8: 1 : pstate 1 (2000 MHz)
powernow-k8: 2 : pstate 2 (1700 MHz)
powernow-k8: 3 : pstate 3 (1400 MHz)
powernow-k8: 4 : pstate 4 (1100 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
EXT3-fs: sda3: couldn't mount because of unsupported optional features (240).
EXT2-fs: sda3: couldn't mount because of unsupported optional features (240).
usb 1-5.4.3: new full speed USB device using ehci_hcd and address 4
EXT4-fs (sda3): barriers enabled
kjournald2 starting: pid 1377, dev sda3:8, commit interval 5 seconds
EXT4-fs (sda3): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda3): mounted filesystem with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 456k freed
usb 1-5.4.3: configuration #1 chosen from 1 choice
input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5.4/1-5.4.3/1-5.4.3:1.0/input/input3
generic-usb 0003:05AC:020C.0001: input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:02.1-5.4.3/input0
input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5.4/1-5.4.3/1-5.4.3:1.1/input/input4
generic-usb 0003:05AC:020C.0002: input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:02.1-5.4.3/input1
usb 1-5.4.1: new low speed USB device using ehci_hcd and address 5
usb 1-5.4.1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5.4/1-5.4.1/1-5.4.1:1.0/input/input5
generic-usb 0003:15CA:00C3.0003: input: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:02.1-5.4.1/input0
udev: starting version 141
EXT4-fs (sda3): internal journal on sda3:8
On Thu, Jun 11, 2009 at 09:52:47PM +0100, Tony Vroon wrote:
> This one is new to me:
...
> ------------[ cut here ]------------
> WARNING: at kernel/smp.c:369 smp_call_function_many+0x52/0x1b3()
...
> ---[ end trace 4eaa2a86a8e2da22 ]---
> start_kernel(): bug: interrupts were enabled *very* early, fixing it
Same here with v2.6.30-2327-g8ebf975, e.g.
Jun 16 04:07:35 polonium ------------[ cut here ]------------
Jun 16 04:07:35 polonium WARNING: at kernel/smp.c:369 smp_call_function_many+0x\
52/0x1b3()
Jun 16 04:07:35 polonium Hardware name: Dinar
Jun 16 04:07:35 polonium Modules linked in:
Jun 16 04:07:35 polonium Pid: 0, comm: swapper Not tainted 2.6.30-numa-sched-fi\
xup-02332-g8892f68 #1
Jun 16 04:07:35 polonium Call Trace:
Jun 16 04:07:35 polonium [<ffffffff8105a07b>] ? smp_call_function_many+0x52/0x1\
b3
Jun 16 04:07:35 polonium [<ffffffff8105a07b>] ? smp_call_function_many+0x52/0x1\
b3
Jun 16 04:07:35 polonium [<ffffffff8103b415>] ? warn_slowpath_common+0x77/0xa3
Jun 16 04:07:35 polonium [<ffffffff8108d1ae>] ? do_ccupdate_local+0x0/0x2a
Jun 16 04:07:35 polonium [<ffffffff8105a07b>] ? smp_call_function_many+0x52/0x1\
b3
Jun 16 04:07:35 polonium [<ffffffff8108d1ae>] ? do_ccupdate_local+0x0/0x2a
Jun 16 04:07:35 polonium [<ffffffff8108d1ae>] ? do_ccupdate_local+0x0/0x2a
Jun 16 04:07:35 polonium [<ffffffff8105a1fc>] ? smp_call_function+0x20/0x24
Jun 16 04:07:35 polonium [<ffffffff8103f945>] ? on_each_cpu+0x10/0x22
Jun 16 04:07:35 polonium [<ffffffff8108f024>] ? do_tune_cpucache+0xee/0x43d
Jun 16 04:07:35 polonium [<ffffffff8108f518>] ? enable_cpucache+0x5d/0x9d
Jun 16 04:07:35 polonium [<ffffffff81695faf>] ? kmem_cache_init+0x3f7/0x451
Jun 16 04:07:35 polonium [<ffffffff810d6092>] ? kclist_add+0x18/0x36
Jun 16 04:07:35 polonium [<ffffffff8168f047>] ? mem_init+0x152/0x15a
Jun 16 04:07:35 polonium [<ffffffff8167fa06>] ? start_kernel+0x1a4/0x2b7
Jun 16 04:07:35 polonium [<ffffffff8167f354>] ? x86_64_start_kernel+0xe5/0xeb
Jun 16 04:07:35 polonium ---[ end trace 4eaa2a86a8e2da22 ]---
Jun 16 04:07:35 polonium start_kernel(): bug: interrupts were enabled *very* ea\
rly, fixing it
and it's followed by Oopses when I am trying to log in via network, e.g.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff811c7c9f>] pty_chars_in_buffer+0x14/0x40
PGD 2320b8067 PUD 234929067 PMD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:13.2/usb2/2-6/2-6.2/serial
CPU 0
Modules linked in:
Pid: 5312, comm: sshd Tainted: G W 2.6.30-numa-sched-fixup-02332-g8892f\
68 #1 Dinar
RIP: 0010:[<ffffffff811c7c9f>] [<ffffffff811c7c9f>] pty_chars_in_buffer+0x14/0\
x40
RSP: 0018:ffff8802330bd9a8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff88023518d000 RCX: ffffffff815263db
RDX: ffff8802319ec6c0 RSI: ffff88023518d188 RDI: ffff880234e23000
RBP: ffff88023518d000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000286 R11: ffffffff811c7c8b R12: ffff880232953700
R13: ffff880232953740 R14: 0000000000000000 R15: 0000000000000000
FS: 00007fa6b23756f0(0000) GS:ffff880028034000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000233008000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process sshd (pid: 5312, threadinfo ffff8802330bc000, task ffff880235f86210)
Stack:
0000000000000000 ffffffff811c343d 0000000000000046 0000000000000000
ffff88023518d000 ffff880232953740 ffff8802355567c0 ffffffff811c0050
0000000000000200 0000000000000000 ffff880232953740 0000000000000000
Call Trace:
[<ffffffff811c343d>] ? n_tty_poll+0x10d/0x130
[<ffffffff811c0050>] ? tty_poll+0x56/0x6d
[<ffffffff810a0552>] ? do_select+0x330/0x507
[<ffffffff810a0bf4>] ? __pollwait+0x0/0xcd
[<ffffffff810a0cc1>] ? pollwake+0x0/0x47
[<ffffffff810a0cc1>] ? pollwake+0x0/0x47
[<ffffffff810a0cc1>] ? pollwake+0x0/0x47
[<ffffffff810a0cc1>] ? pollwake+0x0/0x47
[<ffffffff812fd009>] ? sk_reset_timer+0xf/0x1d
[<ffffffff81334a00>] ? tcp_write_xmit+0x890/0x979
[<ffffffff81331b61>] ? tcp_current_mss+0x3c/0x57
[<ffffffff813a7188>] ? _spin_lock_bh+0x9/0x1f
[<ffffffff812fcb98>] ? release_sock+0x13/0x95
[<ffffffff81329a9f>] ? tcp_sendmsg+0x8c2/0x9b6
[<ffffffff810a08d4>] ? core_sys_select+0x1ab/0x26f
[<ffffffff810779e1>] ? __do_fault+0x3d4/0x40f
[<ffffffff8104ce8e>] ? autoremove_wake_function+0x0/0x2e
[<ffffffff810a0bcb>] ? sys_select+0x92/0xbb
[<ffffffff8109406a>] ? sys_write+0x45/0x6e
[<ffffffff8100b96b>] ? system_call_fastpath+0x16/0x1b
Code: 85 c0 74 10 f6 87 ec 00 00 00 01 75 07 8b 80 f0 00 00 00 c3 31 c0 c3 53 4\
8 89 fb 48 8b bf f8 00 00 00 48 85 ff 74 2a 48 8b 47 40 <48> 8b 00 48 8b 40 30 \
48 85 c0 74 1a ff d0 89 c2 48 8b 43 08 66
RIP [<ffffffff811c7c9f>] pty_chars_in_buffer+0x14/0x40
RSP <ffff8802330bd9a8>
CR2: 0000000000000000
---[ end trace 4eaa2a86a8e2da24 ]---
Regards,
Andreas
On Fri, 2009-06-12 at 17:39 +0200, Andreas Herrmann wrote:
> On Thu, Jun 11, 2009 at 09:52:47PM +0100, Tony Vroon wrote:
> > This one is new to me:
> ...
> > ------------[ cut here ]------------
> > WARNING: at kernel/smp.c:369 smp_call_function_many+0x52/0x1b3()
> ...
> > ---[ end trace 4eaa2a86a8e2da22 ]---
> > start_kernel(): bug: interrupts were enabled *very* early, fixing it
>
> Same here with v2.6.30-2327-g8ebf975, e.g.
>
> Jun 16 04:07:35 polonium ------------[ cut here ]------------
> Jun 16 04:07:35 polonium WARNING: at kernel/smp.c:369 smp_call_function_many+0x\
> 52/0x1b3()
Fixed by commit 8429db5c6336083594036c30f49401405d536911, thank you
Pekka :)
Regards,
Tony V.