When a root port receive the same errors more than once before kernel
process them, the Multiple Error Messages Received flags are set by
hardware. Because root port could only save one kind of correctable
error source id and another uncorrectable error source id at the same
time, so the second message sender id is lost if the 2 messages are
sent from 2 different devices. Below patch searches all devices under
the root port when multiple messages are received.
Signed-off-by: Zhang Yanmin <[email protected]>
---
diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
index dadf492..bbd7428 100644
--- a/drivers/pci/pcie/aer/aerdrv.h
+++ b/drivers/pci/pcie/aer/aerdrv.h
@@ -57,8 +57,10 @@ struct header_log_regs {
unsigned int dw3;
};
+#define AER_MAX_MULTI_ERR_DEVICES 5 /* Not likely to have more */
struct aer_err_info {
- struct pci_dev *dev;
+ struct pci_dev *dev[AER_MAX_MULTI_ERR_DEVICES];
+ int error_dev_num;
u16 id;
int severity; /* 0:NONFATAL | 1:FATAL | 2:COR */
int flags;
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index 2750e7b..3d88727 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -158,6 +158,17 @@ static inline int compare_device_id(struct pci_dev *dev,
return 0;
}
+static int add_error_device(struct aer_err_info *e_info, struct pci_dev *dev)
+{
+ if (e_info->error_dev_num < AER_MAX_MULTI_ERR_DEVICES) {
+ e_info->dev[e_info->error_dev_num] = dev;
+ e_info->error_dev_num++;
+ return 1;
+ } else
+ return 0;
+}
+
+
#define PCI_BUS(x) (((x) >> 8) & 0xff)
static int find_device_iter(struct pci_dev *dev, void *data)
@@ -176,15 +187,31 @@ static int find_device_iter(struct pci_dev *dev, void *data)
if (!nosourceid && (PCI_BUS(e_info->id) != 0)) {
result = compare_device_id(dev, e_info);
if (result)
- e_info->dev = dev;
- return result;
+ add_error_device(e_info, dev);
+
+ /*
+ * If there is no multiple error, we stop
+ * or continue based on the id comparing.
+ */
+ if (!(e_info->flags & AER_MULTI_ERROR_VALID_FLAG))
+ return result;
+
+ /*
+ * If there are multiple errors and id does match,
+ * We need continue to search other devices under
+ * the root port. Return 0 means that.
+ */
+ if (result)
+ return 0;
}
/*
- * Next is to check when bus id is equal to 0 or
- * nosourceid==y. Some ports might lose the bus
- * id of error source id. We check AER status
- * registers to find the initial reporter.
+ * When either
+ * 1) nosourceid==y;
+ * 2) bus id is equal to 0. Some ports might lose the bus
+ * id of error source id;
+ * 3) There are multiple errors and prior id comparing fails;
+ * We check AER status registers to find the initial reporter.
*/
if (atomic_read(&dev->enable_cnt) == 0)
return 0;
@@ -213,8 +240,8 @@ static int find_device_iter(struct pci_dev *dev, void *data)
pos + PCI_ERR_COR_MASK,
&mask);
if (status & ERR_CORRECTABLE_ERROR_MASK & ~mask) {
- e_info->dev = dev;
- return 1;
+ add_error_device(e_info, dev);
+ goto added;
}
} else {
pci_read_config_dword(dev,
@@ -224,12 +251,18 @@ static int find_device_iter(struct pci_dev *dev, void *data)
pos + PCI_ERR_UNCOR_MASK,
&mask);
if (status & ERR_UNCORRECTABLE_ERROR_MASK & ~mask) {
- e_info->dev = dev;
- return 1;
+ add_error_device(e_info, dev);
+ goto added;
}
}
return 0;
+
+added:
+ if (e_info->flags & AER_MULTI_ERROR_VALID_FLAG)
+ return 0;
+ else
+ return 1;
}
/**
@@ -709,6 +742,28 @@ static int get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
return AER_SUCCESS;
}
+static inline void aer_process_err_devices(struct pcie_device *p_device,
+ struct aer_err_info *e_info)
+{
+ int i;
+
+ if (!e_info->dev[0]) {
+ dev_printk(KERN_DEBUG, &p_device->port->dev,
+ "can't find device of ID%04x\n",
+ e_info->id);
+ }
+
+ for (i = 0; i < e_info->error_dev_num && e_info->dev[i]; i++) {
+ if (get_device_error_info(e_info->dev[i], e_info) ==
+ AER_SUCCESS) {
+ aer_print_error(e_info->dev[i], e_info);
+ handle_error_source(p_device,
+ e_info->dev[i],
+ e_info);
+ }
+ }
+}
+
/**
* aer_isr_one_error - consume an error detected by root port
* @p_device: pointer to error root port service device
@@ -754,18 +809,7 @@ static void aer_isr_one_error(struct pcie_device *p_device,
e_info->flags |= AER_MULTI_ERROR_VALID_FLAG;
find_source_device(p_device->port, e_info);
- if (e_info->dev == NULL) {
- printk(KERN_DEBUG "%s->can't find device of ID%04x\n",
- __func__, e_info->id);
- continue;
- }
- if (get_device_error_info(e_info->dev, e_info) ==
- AER_SUCCESS) {
- aer_print_error(e_info->dev, e_info);
- handle_error_source(p_device,
- e_info->dev,
- e_info);
- }
+ aer_process_err_devices(p_device, e_info);
}
kfree(e_info);
On Tue, 16 Jun 2009 13:35:16 +0800
"Zhang, Yanmin" <[email protected]> wrote:
> When a root port receive the same errors more than once before
> kernel process them, the Multiple Error Messages Received flags are
> set by hardware. Because root port could only save one kind of
> correctable error source id and another uncorrectable error source id
> at the same time, so the second message sender id is lost if the 2
> messages are sent from 2 different devices. Below patch searches all
> devices under the root port when multiple messages are received.
>
> Signed-off-by: Zhang Yanmin <[email protected]>
Thanks for rebasing Yanmin; I applied this to my linux-next branch with
Andrew's reviewed-bys.
--
Jesse Barnes, Intel Open Source Technology Center