The TWL4030/5030 family of multifunction devices allow dynamic power
switching based on board-specific applications through power 'scripts'.
Add board-independent core support for this feature and add support for
the RX51 board based on OMAP3.
Amit Kucheria (3):
TWL4030: power: Add support for TWL4030/5030 dynamic power switching
TWL4030: power: print warning for out-of-order script loading
TWL4030: power: OMAP: Board-specifc DPS scripts for RX51 board
arch/arm/mach-omap2/board-rx51-peripherals.c | 120 ++++++++-
drivers/mfd/Kconfig | 13 +
drivers/mfd/Makefile | 1 +
drivers/mfd/twl4030-core.c | 26 ++
drivers/mfd/twl4030-power.c | 396 ++++++++++++++++++++++++++
include/linux/i2c/twl4030.h | 91 ++++++-
6 files changed, 636 insertions(+), 11 deletions(-)
create mode 100644 drivers/mfd/twl4030-power.c
The TWL4030/5030 family of multifunction devices allows board-specific
control of the the various regulators, clock and reset lines through
'scripts' that are loaded into its memory. This allows for Dynamic Power
Switching (DPS).
Implement board-independent core support for DPS that is then used by
board-specific code to load custom DPS scripts.
Signed-off-by: Amit Kucheria <[email protected]>
---
drivers/mfd/Kconfig | 13 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/twl4030-core.c | 26 +++
drivers/mfd/twl4030-power.c | 389 +++++++++++++++++++++++++++++++++++++++++++
include/linux/i2c/twl4030.h | 91 +++++++++-
5 files changed, 510 insertions(+), 10 deletions(-)
create mode 100644 drivers/mfd/twl4030-power.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ee3927a..502c116 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -107,6 +107,19 @@ config TWL4030_CORE
high speed USB OTG transceiver, an audio codec (on most
versions) and many other features.
+config TWL4030_POWER
+ bool "Support power resources on TWL4030 family chips"
+ depends on TWL4030_CORE
+ help
+ Say yes here if you want to use the power resources on the
+ TWL4030 family chips. Most of these resources are regulators,
+ which have a separate driver; some are control signals, such
+ as clock request handshaking.
+
+ This driver uses board-specific data to initialize the resources
+ and load scripts controling which resources are switched off/on
+ or reset when a sleep, wakeup or warm reset event occurs.
+
config MFD_TMIO
bool
default n
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 3afb519..44a0053 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_MENELAUS) += menelaus.o
obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o
+obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o
obj-$(CONFIG_MFD_CORE) += mfd-core.o
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index ec90e95..30d1179 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -89,6 +89,12 @@
#define twl_has_madc() false
#endif
+#ifdef CONFIG_TWL4030_POWER
+#define twl_has_power() true
+#else
+#define twl_has_power() false
+#endif
+
#if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE)
#define twl_has_rtc() true
#else
@@ -102,6 +108,13 @@
#endif
+#if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \
+ || defined(CONFIG_INPUT_TWL4030_PWBUTTON_MODULE)
+#define twl_has_pwrbutton() true
+#else
+#define twl_has_pwrbutton() false
+#endif
+
/* Triton Core internal information (BEGIN) */
/* Last - for index max*/
@@ -225,6 +238,8 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
{ 3, TWL4030_BASEADD_SECURED_REG },
};
+extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
+
/*----------------------------------------------------------------------*/
/* Exported Functions */
@@ -526,6 +541,13 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
usb_transceiver = child;
}
+ if (twl_has_pwrbutton()) {
+ child = add_child(1, "twl4030_pwrbutton",
+ NULL, 0, true, pdata->irq_base + 8 + 0, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
if (twl_has_regulator()) {
/*
child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1);
@@ -776,6 +798,10 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
/* setup clock framework */
clocks_init(&client->dev);
+ /* load power event scripts */
+ if (twl_has_power() && pdata->power)
+ twl4030_power_init(pdata->power);
+
/* Maybe init the T2 Interrupt subsystem */
if (client->irq
&& pdata->irq_base
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
new file mode 100644
index 0000000..75dd814
--- /dev/null
+++ b/drivers/mfd/twl4030-power.c
@@ -0,0 +1,389 @@
+/*
+ * linux/drivers/i2c/chips/twl4030-power.c
+ *
+ * Handle TWL4030 Power initialization
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2006 Texas Instruments, Inc
+ *
+ * Written by Kalle Jokiniemi
+ * Peter De Schrijver <[email protected]>
+ * Several fixes by Amit Kucheria <[email protected]>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+static u8 triton_next_free_address = 0x2b;
+
+#define PWR_P1_SW_EVENTS 0x10
+#define PWR_DEVOFF (1<<0)
+
+#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36)
+#define PHY_TO_OFF_PM_RECEIVER(p) (p - 0x5b)
+
+#define NUM_OF_RESOURCES 28
+
+/* resource - hfclk */
+#define R_HFCLKOUT_DEV_GRP PHY_TO_OFF_PM_RECEIVER(0xe6)
+
+/* PM events */
+#define R_P1_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x46)
+#define R_P2_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x47)
+#define R_P3_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x48)
+#define R_CFG_P1_TRANSITION PHY_TO_OFF_PM_MASTER(0x36)
+#define R_CFG_P2_TRANSITION PHY_TO_OFF_PM_MASTER(0x37)
+#define R_CFG_P3_TRANSITION PHY_TO_OFF_PM_MASTER(0x38)
+
+#define LVL_WAKEUP 0x08
+
+#define ENABLE_WARMRESET (1<<4)
+
+#define END_OF_SCRIPT 0x3f
+
+#define R_SEQ_ADD_A2S PHY_TO_OFF_PM_MASTER(0x55)
+#define R_SEQ_ADD_S2A12 PHY_TO_OFF_PM_MASTER(0x56)
+#define R_SEQ_ADD_S2A3 PHY_TO_OFF_PM_MASTER(0x57)
+#define R_SEQ_ADD_WARM PHY_TO_OFF_PM_MASTER(0x58)
+#define R_MEMORY_ADDRESS PHY_TO_OFF_PM_MASTER(0x59)
+#define R_MEMORY_DATA PHY_TO_OFF_PM_MASTER(0x5a)
+
+#define R_PROTECT_KEY 0x0E
+#define KEY_1 0xC0
+#define KEY_2 0x0C
+
+/* resource configuration registers */
+
+#define DEVGROUP_OFFSET 0
+#define TYPE_OFFSET 1
+
+static u8 res_config_addrs[] = {
+ [RES_VAUX1] = 0x17,
+ [RES_VAUX2] = 0x1b,
+ [RES_VAUX3] = 0x1f,
+ [RES_VAUX4] = 0x23,
+ [RES_VMMC1] = 0x27,
+ [RES_VMMC2] = 0x2b,
+ [RES_VPLL1] = 0x2f,
+ [RES_VPLL2] = 0x33,
+ [RES_VSIM] = 0x37,
+ [RES_VDAC] = 0x3b,
+ [RES_VINTANA1] = 0x3f,
+ [RES_VINTANA2] = 0x43,
+ [RES_VINTDIG] = 0x47,
+ [RES_VIO] = 0x4b,
+ [RES_VDD1] = 0x55,
+ [RES_VDD2] = 0x63,
+ [RES_VUSB_1V5] = 0x71,
+ [RES_VUSB_1V8] = 0x74,
+ [RES_VUSB_3V1] = 0x77,
+ [RES_VUSBCP] = 0x7a,
+ [RES_REGEN] = 0x7f,
+ [RES_NRES_PWRON] = 0x82,
+ [RES_CLKEN] = 0x85,
+ [RES_SYSEN] = 0x88,
+ [RES_HFCLKOUT] = 0x8b,
+ [RES_32KCLKOUT] = 0x8e,
+ [RES_RESET] = 0x91,
+ [RES_Main_Ref] = 0x94,
+};
+
+static int __init twl4030_write_script_byte(u8 address, u8 byte)
+{
+ int err;
+
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_MEMORY_ADDRESS);
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte,
+ R_MEMORY_DATA);
+
+ return err;
+}
+
+static int __init twl4030_write_script_ins(u8 address, u16 pmb_message,
+ u8 delay, u8 next)
+{
+ int err = 0;
+
+ address *= 4;
+ err |= twl4030_write_script_byte(address++, pmb_message >> 8);
+ err |= twl4030_write_script_byte(address++, pmb_message & 0xff);
+ err |= twl4030_write_script_byte(address++, delay);
+ err |= twl4030_write_script_byte(address++, next);
+
+ return err;
+}
+
+static int __init twl4030_write_script(u8 address, struct twl4030_ins *script,
+ int len)
+{
+ int err = 0;
+
+ for (; len; len--, address++, script++) {
+ if (len == 1)
+ err |= twl4030_write_script_ins(address,
+ script->pmb_message,
+ script->delay,
+ END_OF_SCRIPT);
+ else
+ err |= twl4030_write_script_ins(address,
+ script->pmb_message,
+ script->delay,
+ address + 1);
+ }
+
+ return err;
+}
+
+static int __init config_wakeup3_sequence(u8 address)
+{
+
+ int err = 0;
+
+ /* Set SLEEP to ACTIVE SEQ address for P3 */
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_S2A3);
+
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, LVL_WAKEUP,
+ R_P3_SW_EVENTS);
+ if (err)
+ printk(KERN_ERR "TWL4030 wakeup sequence for P3" \
+ "config error\n");
+
+ return err;
+}
+
+static int __init config_wakeup12_sequence(u8 address)
+{
+ int err = 0;
+
+ /* Set SLEEP to ACTIVE SEQ address for P1 and P2 */
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_S2A12);
+
+ /* P1/P2/P3 LVL_WAKEUP should be on LEVEL */
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, LVL_WAKEUP,
+ R_P1_SW_EVENTS);
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, LVL_WAKEUP,
+ R_P2_SW_EVENTS);
+
+ if (machine_is_omap_3430sdp() || machine_is_omap_ldp()) {
+ u8 data;
+ /* Disabling AC charger effect on sleep-active transitions */
+ err |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+ R_CFG_P1_TRANSITION);
+ data &= ~(1<<1);
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data ,
+ R_CFG_P1_TRANSITION);
+ }
+
+ if (err)
+ printk(KERN_ERR "TWL4030 wakeup sequence for P1 and P2" \
+ "config error\n");
+
+ return err;
+}
+
+static int __init config_sleep_sequence(u8 address)
+{
+ int err = 0;
+
+ /*
+ * CLKREQ is pulled high on the 2430SDP, therefore, we need to take
+ * it out of the HFCLKOUT DEV_GRP for P1 else HFCLKOUT can't be stopped.
+ */
+
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+ 0x20, R_HFCLKOUT_DEV_GRP);
+
+ /* Set ACTIVE to SLEEP SEQ address in T2 memory*/
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_A2S);
+
+ if (err)
+ printk(KERN_ERR "TWL4030 sleep sequence config error\n");
+
+ return err;
+}
+
+static int __init config_warmreset_sequence(u8 address)
+{
+
+ int err = 0;
+ u8 rd_data;
+
+ /* Set WARM RESET SEQ address for P1 */
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_WARM);
+
+ /* P1/P2/P3 enable WARMRESET */
+ err |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+ R_P1_SW_EVENTS);
+ rd_data |= ENABLE_WARMRESET;
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+ R_P1_SW_EVENTS);
+
+ err |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+ R_P2_SW_EVENTS);
+ rd_data |= ENABLE_WARMRESET;
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+ R_P2_SW_EVENTS);
+
+ err |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+ R_P3_SW_EVENTS);
+ rd_data |= ENABLE_WARMRESET;
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+ R_P3_SW_EVENTS);
+
+ if (err)
+ printk(KERN_ERR
+ "TWL4030 warmreset seq config error\n");
+ return err;
+}
+
+static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig)
+{
+ int rconfig_addr;
+ int err;
+ u8 type;
+
+ if (rconfig->resource > NUM_OF_RESOURCES) {
+ printk(KERN_ERR
+ "TWL4030 Resource %d does not exist\n",
+ rconfig->resource);
+ return -EINVAL;
+ }
+
+ rconfig_addr = res_config_addrs[rconfig->resource];
+
+ /* Set resource group */
+ if (rconfig->devgroup >= 0)
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+ rconfig->devgroup << 5,
+ rconfig_addr + DEVGROUP_OFFSET);
+ if (err < 0) {
+ printk(KERN_ERR
+ "TWL4030 failed to program devgroup");
+ return err;
+ }
+
+ /* Set resource types */
+ err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type,
+ rconfig_addr + TYPE_OFFSET);
+ if (err < 0) {
+ printk(KERN_ERR
+ "TWL4030 Resource %d type could not be read\n",
+ rconfig->resource);
+ return err;
+ }
+
+ if (rconfig->type >= 0) {
+ type &= ~7;
+ type |= rconfig->type;
+ }
+
+ if (rconfig->type2 >= 0) {
+ type &= ~(3 << 3);
+ type |= rconfig->type2 << 3;
+ }
+
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+ type, rconfig_addr + TYPE_OFFSET);
+ if (err < 0) {
+ printk(KERN_ERR
+ "TWL4030 failed to program resource type");
+ return err;
+ }
+
+ return 0;
+
+}
+
+static int __init load_triton_script(struct twl4030_script *tscript)
+{
+ u8 address = triton_next_free_address;
+ int err;
+
+ /* Make sure the script isn't going beyond last valid address */
+ if ((address + tscript->size) > (END_OF_SCRIPT-1)) {
+ printk(KERN_ERR "TWL4030 script too big error\n");
+ return -EINVAL;
+ }
+
+ err = twl4030_write_script(address, tscript->script, tscript->size);
+ if (err)
+ return err;
+
+ triton_next_free_address += tscript->size;
+
+ if (tscript->flags & TRITON_WRST_SCRIPT)
+ err |= config_warmreset_sequence(address);
+
+ if (tscript->flags & TRITON_WAKEUP12_SCRIPT)
+ err |= config_wakeup12_sequence(address);
+
+ if (tscript->flags & TRITON_WAKEUP3_SCRIPT)
+ err |= config_wakeup3_sequence(address);
+
+ if (tscript->flags & TRITON_SLEEP_SCRIPT)
+ err |= config_sleep_sequence(address);
+
+ return err;
+}
+
+void __init twl4030_power_init(struct twl4030_power_data *triton2_scripts)
+{
+ int err = 0;
+ int i;
+ struct twl4030_resconfig *resconfig;
+
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_1,
+ R_PROTECT_KEY);
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_2,
+ R_PROTECT_KEY);
+ if (err)
+ printk(KERN_ERR
+ "TWL4030 Unable to unlock registers\n");
+
+ for (i = 0; i < triton2_scripts->size; i++) {
+ err = load_triton_script(triton2_scripts->scripts[i]);
+ if (err < 0) {
+ printk(KERN_ERR "TWL4030 failed to load scripts");
+ break;
+ }
+ }
+
+ resconfig = triton2_scripts->resource_config;
+ if (resconfig) {
+ while (resconfig->resource) {
+ err = twl4030_configure_resource(resconfig);
+ resconfig++;
+ if (err < 0) {
+ printk(KERN_ERR
+ "TWL4030 failed to configure resource");
+ break;
+ }
+ }
+ }
+
+ if (twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY))
+ printk(KERN_ERR
+ "TWL4030 Unable to relock registers\n");
+}
diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
index 0dc80ef..15edfaa 100644
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -220,19 +220,28 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
/* Power bus message definitions */
-#define DEV_GRP_NULL 0x0
-#define DEV_GRP_P1 0x1
-#define DEV_GRP_P2 0x2
-#define DEV_GRP_P3 0x4
+/* The TWL4030/5030 splits its power-management resources (the various
+ * regulators, clock and reset lines) into 3 processor groups - P1, P2 and
+ * P3. These groups can then be configured to transition between sleep, wait-on
+ * and active states by sending messages to the power bus. See Section 5.4.2
+ * Power Resources of TWL4030 TRM
+ */
-#define RES_GRP_RES 0x0
-#define RES_GRP_PP 0x1
-#define RES_GRP_RC 0x2
+/* Processor groups */
+#define DEV_GRP_NULL 0x0
+#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */
+#define DEV_GRP_P2 0x2 /* P2: all Modem devices */
+#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */
+
+/* Resource groups */
+#define RES_GRP_RES 0x0 /* Reserved */
+#define RES_GRP_PP 0x1 /* Power providers */
+#define RES_GRP_RC 0x2 /* Reset and control */
#define RES_GRP_PP_RC 0x3
-#define RES_GRP_PR 0x4
+#define RES_GRP_PR 0x4 /* Power references */
#define RES_GRP_PP_PR 0x5
#define RES_GRP_RC_PR 0x6
-#define RES_GRP_ALL 0x7
+#define RES_GRP_ALL 0x7 /* All resource groups */
#define RES_TYPE2_R0 0x0
@@ -243,6 +252,40 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
#define RES_STATE_SLEEP 0x8
#define RES_STATE_OFF 0x0
+/* Power resources */
+
+/* Power providers */
+#define RES_VAUX1 1
+#define RES_VAUX2 2
+#define RES_VAUX3 3
+#define RES_VAUX4 4
+#define RES_VMMC1 5
+#define RES_VMMC2 6
+#define RES_VPLL1 7
+#define RES_VPLL2 8
+#define RES_VSIM 9
+#define RES_VDAC 10
+#define RES_VINTANA1 11
+#define RES_VINTANA2 12
+#define RES_VINTDIG 13
+#define RES_VIO 14
+#define RES_VDD1 15
+#define RES_VDD2 16
+#define RES_VUSB_1V5 17
+#define RES_VUSB_1V8 18
+#define RES_VUSB_3V1 19
+#define RES_VUSBCP 20
+#define RES_REGEN 21
+/* Reset and control */
+#define RES_NRES_PWRON 22
+#define RES_CLKEN 23
+#define RES_SYSEN 24
+#define RES_HFCLKOUT 25
+#define RES_32KCLKOUT 26
+#define RES_RESET 27
+/* Power Reference */
+#define RES_Main_Ref 28
+
/*
* Power Bus Message Format ... these can be sent individually by Linux,
* but are usually part of downloaded scripts that are run when various
@@ -320,6 +363,34 @@ struct twl4030_usb_data {
enum twl4030_usb_mode usb_mode;
};
+struct twl4030_ins {
+ u16 pmb_message;
+ u8 delay;
+};
+
+struct twl4030_script {
+ struct twl4030_ins *script;
+ unsigned size;
+ u8 flags;
+#define TRITON_WRST_SCRIPT (1<<0)
+#define TRITON_WAKEUP12_SCRIPT (1<<1)
+#define TRITON_WAKEUP3_SCRIPT (1<<2)
+#define TRITON_SLEEP_SCRIPT (1<<3)
+};
+
+struct twl4030_resconfig {
+ u8 resource;
+ u8 devgroup;
+ u8 type;
+ u8 type2;
+};
+
+struct twl4030_power_data {
+ struct twl4030_script **scripts;
+ unsigned size;
+ const struct twl4030_resconfig *resource_config;
+};
+
struct twl4030_platform_data {
unsigned irq_base, irq_end;
struct twl4030_bci_platform_data *bci;
@@ -327,6 +398,7 @@ struct twl4030_platform_data {
struct twl4030_madc_platform_data *madc;
struct twl4030_keypad_data *keypad;
struct twl4030_usb_data *usb;
+ struct twl4030_power_data *power;
/* LDO regulators */
struct regulator_init_data *vdac;
@@ -357,7 +429,6 @@ int twl4030_sih_setup(int module);
#define TWL4030_VAUX3_DEV_GRP 0x1F
#define TWL4030_VAUX3_DEDICATED 0x22
-
#if defined(CONFIG_TWL4030_BCI_BATTERY) || \
defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
extern int twl4030charger_usb_en(int enable);
--
1.6.3.1
When the sleep script is loaded before the wakeup script, there is a
chance that the system might go to sleep before the wakeup script
loading is completed. This will lead to a system that does not wakeup
and has been observed to cause non-booting boards.
Various options were considered to solve this problem, including
modification of the core twl4030 power code to be smart enough to
reorder the loading of the scripts. But it felt too over-engineered.
Hence this patch just warns the DPS script developer so that it may be
reordered in the board-code itself.
Signed-off-by: Amit Kucheria <[email protected]>
---
drivers/mfd/twl4030-power.c | 11 +++++++++--
1 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 75dd814..884c04f 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -320,6 +320,7 @@ static int __init load_triton_script(struct twl4030_script *tscript)
{
u8 address = triton_next_free_address;
int err;
+ static u8 mask = 0;
/* Make sure the script isn't going beyond last valid address */
if ((address + tscript->size) > (END_OF_SCRIPT-1)) {
@@ -336,14 +337,20 @@ static int __init load_triton_script(struct twl4030_script *tscript)
if (tscript->flags & TRITON_WRST_SCRIPT)
err |= config_warmreset_sequence(address);
- if (tscript->flags & TRITON_WAKEUP12_SCRIPT)
+ if (tscript->flags & TRITON_WAKEUP12_SCRIPT) {
err |= config_wakeup12_sequence(address);
+ mask |= TRITON_WAKEUP12_SCRIPT;
+ }
if (tscript->flags & TRITON_WAKEUP3_SCRIPT)
err |= config_wakeup3_sequence(address);
- if (tscript->flags & TRITON_SLEEP_SCRIPT)
+ if (tscript->flags & TRITON_SLEEP_SCRIPT) {
+ if (!(mask & TRITON_WAKEUP12_SCRIPT))
+ printk(KERN_WARNING
+ "TWL4030: Wakeup script not yet loaded. Might lead to boot failure on some boards\n");
err |= config_sleep_sequence(address);
+ }
return err;
}
--
1.6.3.1
Add support for Dynamic Power Switching (DPS) for the RX51 board.
Signed-off-by: Amit Kucheria <[email protected]>
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 120 +++++++++++++++++++++++++-
1 files changed, 119 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9a0bf67..43d081b 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-omap2/board-rx51-flash.c
+ * linux/arch/arm/mach-omap2/board-rx51-peripherals.c
*
* Copyright (C) 2008-2009 Nokia
*
@@ -278,6 +278,123 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
.setup = rx51_twlgpio_setup,
};
+static struct twl4030_ins sleep_on_seq[] __initdata = {
+/*
+ * Turn off VDD1 and VDD2.
+ */
+ {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_OFF), 4},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_OFF), 2},
+/*
+ * And also turn off the OMAP3 PLLs and the sysclk output.
+ */
+ {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_OFF), 3},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_OFF), 3},
+};
+
+static struct twl4030_script sleep_on_script __initdata = {
+ .script = sleep_on_seq,
+ .size = ARRAY_SIZE(sleep_on_seq),
+ .flags = TRITON_SLEEP_SCRIPT,
+};
+
+static struct twl4030_ins wakeup_seq[] __initdata = {
+/*
+ * Reenable the OMAP3 PLLs.
+ * Wakeup VDD1 and VDD2.
+ * Reenable sysclk output.
+ */
+ {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_ACTIVE), 0x30},
+ {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 0x30},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 0x37},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 3},
+};
+
+static struct twl4030_script wakeup_script __initdata = {
+ .script = wakeup_seq,
+ .size = ARRAY_SIZE(wakeup_seq),
+ .flags = TRITON_WAKEUP12_SCRIPT,
+};
+
+static struct twl4030_ins wakeup_p3_seq[] __initdata = {
+/*
+ * Wakeup VDD1 (dummy to be able to insert a delay)
+ * Enable CLKEN
+ */
+ {MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_ACTIVE), 3},
+};
+
+static struct twl4030_script wakeup_p3_script __initdata = {
+ .script = wakeup_p3_seq,
+ .size = ARRAY_SIZE(wakeup_p3_seq),
+ .flags = TRITON_WAKEUP3_SCRIPT,
+};
+
+static struct twl4030_ins wrst_seq[] __initdata = {
+/*
+ * Reset twl4030.
+ * Reset VDD1 regulator.
+ * Reset VDD2 regulator.
+ * Reset VPLL1 regulator.
+ * Enable sysclk output.
+ * Reenable twl4030.
+ */
+ {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
+ {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
+ 0x13},
+ {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 2, RES_STATE_WRST), 0x13},
+ {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
+ {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
+ {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
+ {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
+ {MSG_SINGULAR(DEV_GRP_P1, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
+ {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
+};
+
+static struct twl4030_script wrst_script __initdata = {
+ .script = wrst_seq,
+ .size = ARRAY_SIZE(wrst_seq),
+ .flags = TRITON_WRST_SCRIPT,
+};
+
+static struct twl4030_script *twl4030_scripts[] __initdata = {
+ /* wakeup12 script should be loaded before sleep script, otherwise a
+ board might hit retention before loading of wakeup script is
+ completed. This can cause boot failures depending on timing issues.
+ */
+ &wakeup_script,
+ &sleep_on_script,
+ &wakeup_p3_script,
+ &wrst_script,
+};
+
+static struct twl4030_resconfig twl4030_rconfig[] = {
+ { .resource = RES_VINTANA1, .devgroup = -1, .type = -1, .type2 = 1 },
+ { .resource = RES_VINTANA2, .devgroup = -1, .type = -1, .type2 = 1 },
+ { .resource = RES_VINTDIG, .devgroup = -1, .type = -1, .type2 = 1 },
+ { .resource = RES_VMMC1, .devgroup = -1, .type = -1, .type2 = 3},
+ { .resource = RES_VMMC2, .devgroup = DEV_GRP_NULL, .type = -1,
+ .type2 = 3},
+ { .resource = RES_VAUX1, .devgroup = -1, .type = -1, .type2 = 3},
+ { .resource = RES_VAUX2, .devgroup = -1, .type = -1, .type2 = 3},
+ { .resource = RES_VAUX3, .devgroup = -1, .type = -1, .type2 = 3},
+ { .resource = RES_VAUX4, .devgroup = -1, .type = -1, .type2 = 3},
+ { .resource = RES_VPLL2, .devgroup = -1, .type = -1, .type2 = 3},
+ { .resource = RES_VDAC, .devgroup = -1, .type = -1, .type2 = 3},
+ { .resource = RES_VSIM, .devgroup = DEV_GRP_NULL, .type = -1,
+ .type2 = 3},
+ { .resource = RES_CLKEN, .devgroup = DEV_GRP_P3, .type = -1,
+ .type2 = 1 },
+ { 0, 0},
+};
+
+static struct twl4030_power_data rx51_t2scripts_data = {
+ .scripts = twl4030_scripts,
+ .size = ARRAY_SIZE(twl4030_scripts),
+ .resource_config = twl4030_rconfig,
+};
+
+
+
static struct twl4030_platform_data rx51_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
@@ -286,6 +403,7 @@ static struct twl4030_platform_data rx51_twldata = {
.gpio = &rx51_gpio_data,
.keypad = &rx51_kp_data,
.madc = &rx51_madc_data,
+ .power = &rx51_t2scripts_data,
.vaux1 = &rx51_vaux1,
.vaux2 = &rx51_vaux2,
--
1.6.3.1