In certain cases (such as ACPI) we want to be able to associate
platform-specific data against the SCSI device tree. Handling this
properly requires the ability to run platform code at SCSI init time.
This patch adds stub functions that can be overridden if the platform
defines CONFIG_SCSI_PLATFORM.
Signed-off-by: Matthew Garrett <[email protected]>
---
drivers/scsi/Kconfig | 4 ++++
drivers/scsi/scsi.c | 6 ++++++
drivers/scsi/scsi_priv.h | 1 -
include/scsi/scsi.h | 10 ++++++++++
4 files changed, 20 insertions(+), 1 deletions(-)
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 9c23122..7537d0b 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -34,6 +34,10 @@ config SCSI_DMA
bool
default n
+config SCSI_PLATFORM
+ bool
+ default n
+
config SCSI_TGT
tristate "SCSI target support"
depends on SCSI && EXPERIMENTAL
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 2de5f3a..da02f64 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -1332,12 +1332,17 @@ static int __init init_scsi(void)
error = scsi_sysfs_register();
if (error)
goto cleanup_sysctl;
+ error = scsi_platform_register();
+ if (error)
+ goto cleanup_sysfs;
scsi_netlink_init();
printk(KERN_NOTICE "SCSI subsystem initialized\n");
return 0;
+cleanup_sysfs:
+ scsi_sysfs_unregister();
cleanup_sysctl:
scsi_exit_sysctl();
cleanup_hosts:
@@ -1356,6 +1361,7 @@ cleanup_queue:
static void __exit exit_scsi(void)
{
scsi_netlink_exit();
+ scsi_platform_unregister();
scsi_sysfs_unregister();
scsi_exit_sysctl();
scsi_exit_hosts();
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index 021e503..bce4a70 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -131,7 +131,6 @@ extern int scsi_sysfs_target_initialize(struct scsi_device *);
extern struct scsi_transport_template blank_transport_template;
extern void __scsi_remove_device(struct scsi_device *);
-extern struct bus_type scsi_bus_type;
extern struct attribute_group *scsi_sysfs_shost_attr_groups[];
/* scsi_netlink.c */
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 084478e..f349c83 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -140,6 +140,16 @@ struct scsi_cmnd;
#define SCSI_MAX_VARLEN_CDB_SIZE 260
+#ifdef CONFIG_SCSI_PLATFORM
+extern int scsi_platform_register(void);
+extern void scsi_platform_unregister(void);
+#else
+static inline int scsi_platform_register(void) { return 0; };
+static inline void scsi_platform_unregister(void) { };
+#endif
+
+extern struct bus_type scsi_bus_type;
+
/* defined in T10 SCSI Primary Commands-2 (SPC2) */
struct scsi_varlen_cdb_hdr {
u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
--
1.6.2.5
Now that we have the ability to directly glue the ACPI namespace to the
driver model in libata, we don't need the custom code to handle the
same thing. Remove it and migrate the functions over to the new code.
Signed-off-by: Matthew Garrett <[email protected]>
---
drivers/ata/libata-acpi.c | 170 +++++++++++---------------------------------
drivers/ata/libata-core.c | 3 -
drivers/ata/libata-pmp.c | 4 -
drivers/ata/libata.h | 4 -
drivers/ata/pata_acpi.c | 4 +-
include/linux/libata.h | 7 +--
6 files changed, 47 insertions(+), 145 deletions(-)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 2d12a2c..4132d49 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -56,14 +56,29 @@ static void ata_acpi_clear_gtf(struct ata_device *dev)
dev->gtf_cache = NULL;
}
-static acpi_handle ap_acpi_handle(struct ata_port *ap)
+/**
+ * ata_ap_acpi_handle - provide the acpi_handle for an ata_port
+ * @ap: the acpi_handle returned will correspond to this port
+ *
+ * Returns the acpi_handle for the ACPI namespace object corresponding to
+ * the ata_port passed into the function, or NULL if no such object exists
+ */
+acpi_handle ata_ap_acpi_handle(struct ata_port *ap)
{
if (ap->flags & ATA_FLAG_ACPI_SATA)
return NULL;
return DEVICE_ACPI_HANDLE(&ap->scsi_host->shost_gendev);
}
+EXPORT_SYMBOL(ata_ap_acpi_handle);
-static acpi_handle dev_acpi_handle(struct ata_device *dev)
+/**
+ * ata_dev_acpi_handle - provide the acpi_handle for an ata_device
+ * @dev: the acpi_device returned will correspond to this port
+ *
+ * Returns the acpi_handle for the ACPI namespace object corresponding to
+ * the ata_device passed into the function, or NULL if no such object exists
+ */
+acpi_handle ata_dev_acpi_handle(struct ata_device *dev)
{
acpi_integer adr;
struct ata_port *ap = dev->link->ap;
@@ -78,66 +93,9 @@ static acpi_handle dev_acpi_handle(struct ata_device *dev)
adr = SATA_ADR(ap->port_no, dev->link->pmp);
return acpi_get_child(DEVICE_ACPI_HANDLE(ap->host->dev), adr);
} else
- return acpi_get_child(ap_acpi_handle(ap), dev->devno);
-}
-
-/**
- * ata_acpi_associate_sata_port - associate SATA port with ACPI objects
- * @ap: target SATA port
- *
- * Look up ACPI objects associated with @ap and initialize acpi_handle
- * fields of @ap, the port and devices accordingly.
- *
- * LOCKING:
- * EH context.
- *
- * RETURNS:
- * 0 on success, -errno on failure.
- */
-void ata_acpi_associate_sata_port(struct ata_port *ap)
-{
- WARN_ON(!(ap->flags & ATA_FLAG_ACPI_SATA));
-
- if (!sata_pmp_attached(ap)) {
- acpi_integer adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
-
- ap->link.device->acpi_handle =
- acpi_get_child(ap->host->acpi_handle, adr);
- } else {
- struct ata_link *link;
-
- ap->link.device->acpi_handle = NULL;
-
- ata_for_each_link(link, ap, EDGE) {
- acpi_integer adr = SATA_ADR(ap->port_no, link->pmp);
-
- link->device->acpi_handle =
- acpi_get_child(ap->host->acpi_handle, adr);
- }
- }
-}
-
-static void ata_acpi_associate_ide_port(struct ata_port *ap)
-{
- int max_devices, i;
-
- ap->acpi_handle = acpi_get_child(ap->host->acpi_handle, ap->port_no);
- if (!ap->acpi_handle)
- return;
-
- max_devices = 1;
- if (ap->flags & ATA_FLAG_SLAVE_POSS)
- max_devices++;
-
- for (i = 0; i < max_devices; i++) {
- struct ata_device *dev = &ap->link.device[i];
-
- dev->acpi_handle = acpi_get_child(ap->acpi_handle, i);
- }
-
- if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0)
- ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
+ return acpi_get_child(ata_ap_acpi_handle(ap), dev->devno);
}
+EXPORT_SYMBOL(ata_dev_acpi_handle);
/* @ap and @dev are the same as ata_acpi_handle_hotplug() */
static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev)
@@ -182,9 +140,9 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
acpi_handle handle;
if (dev)
- handle = dev->acpi_handle;
+ handle = ata_dev_acpi_handle(dev);
else
- handle = ap->acpi_handle;
+ handle = ata_ap_acpi_handle(ap);
spin_lock_irqsave(ap->lock, flags);
/*
@@ -269,56 +227,6 @@ static struct acpi_dock_ops ata_acpi_ap_dock_ops = {
};
/**
- * ata_acpi_associate - associate ATA host with ACPI objects
- * @host: target ATA host
- *
- * Look up ACPI objects associated with @host and initialize
- * acpi_handle fields of @host, its ports and devices accordingly.
- *
- * LOCKING:
- * EH context.
- *
- * RETURNS:
- * 0 on success, -errno on failure.
- */
-void ata_acpi_associate(struct ata_host *host)
-{
- int i, j;
-
- if (!is_pci_dev(host->dev) || libata_noacpi)
- return;
-
- host->acpi_handle = DEVICE_ACPI_HANDLE(host->dev);
- if (!host->acpi_handle)
- return;
-
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
-
- if (host->ports[0]->flags & ATA_FLAG_ACPI_SATA)
- ata_acpi_associate_sata_port(ap);
- else
- ata_acpi_associate_ide_port(ap);
-
- if (ap->acpi_handle) {
- /* we might be on a docking station */
- register_hotplug_dock_device(ap->acpi_handle,
- &ata_acpi_ap_dock_ops, ap);
- }
-
- for (j = 0; j < ata_link_max_devices(&ap->link); j++) {
- struct ata_device *dev = &ap->link.device[j];
-
- if (dev->acpi_handle) {
- /* we might be on a docking station */
- register_hotplug_dock_device(dev->acpi_handle,
- &ata_acpi_dev_dock_ops, dev);
- }
- }
- }
-}
-
-/**
* ata_acpi_dissociate - dissociate ATA host from ACPI objects
* @host: target ATA host
*
@@ -339,7 +247,7 @@ void ata_acpi_dissociate(struct ata_host *host)
struct ata_port *ap = host->ports[i];
const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
- if (ap->acpi_handle && gtm)
+ if (ata_ap_acpi_handle(ap) && gtm)
ata_acpi_stm(ap, gtm);
}
}
@@ -364,7 +272,8 @@ int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *gtm)
acpi_status status;
int rc = 0;
- status = acpi_evaluate_object(ap->acpi_handle, "_GTM", NULL, &output);
+ status = acpi_evaluate_object(ata_ap_acpi_handle(ap), "_GTM", NULL,
+ &output);
rc = -ENOENT;
if (status == AE_NOT_FOUND)
@@ -437,7 +346,8 @@ int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm)
input.count = 3;
input.pointer = in_params;
- status = acpi_evaluate_object(ap->acpi_handle, "_STM", &input, NULL);
+ status = acpi_evaluate_object(ata_ap_acpi_handle(ap), "_STM", &input,
+ NULL);
if (status == AE_NOT_FOUND)
return -ENOENT;
@@ -494,7 +404,8 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf)
__func__, ap->port_no);
/* _GTF has no input parameters */
- status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output);
+ status = acpi_evaluate_object(ata_dev_acpi_handle(dev), "_GTF", NULL,
+ &output);
out_obj = dev->gtf_cache = output.pointer;
if (ACPI_FAILURE(status)) {
@@ -852,7 +763,8 @@ static int ata_acpi_push_id(struct ata_device *dev)
/* It's OK for _SDD to be missing too. */
swap_buf_le16(dev->id, ATA_ID_WORDS);
- status = acpi_evaluate_object(dev->acpi_handle, "_SDD", &input, NULL);
+ status = acpi_evaluate_object(ata_dev_acpi_handle(dev), "_SDD", &input,
+ NULL);
swap_buf_le16(dev->id, ATA_ID_WORDS);
err = ACPI_FAILURE(status) ? -EIO : 0;
@@ -899,7 +811,7 @@ void ata_acpi_on_resume(struct ata_port *ap)
const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
struct ata_device *dev;
- if (ap->acpi_handle && gtm) {
+ if (ata_ap_acpi_handle(ap) && gtm) {
/* _GTM valid */
/* restore timing parameters */
@@ -940,22 +852,22 @@ void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
{
struct ata_device *dev;
- if (!ap->acpi_handle || (ap->flags & ATA_FLAG_ACPI_SATA))
+ if (!ata_ap_acpi_handle(ap) || (ap->flags & ATA_FLAG_ACPI_SATA))
return;
/* channel first and then drives for power on and vica versa
for power off */
if (state.event == PM_EVENT_ON)
- acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0);
+ acpi_bus_set_power(ata_ap_acpi_handle(ap), ACPI_STATE_D0);
ata_for_each_dev(dev, &ap->link, ENABLED) {
- if (dev->acpi_handle)
- acpi_bus_set_power(dev->acpi_handle,
+ if (ata_dev_acpi_handle(dev))
+ acpi_bus_set_power(ata_dev_acpi_handle(dev),
state.event == PM_EVENT_ON ?
ACPI_STATE_D0 : ACPI_STATE_D3);
}
if (state.event != PM_EVENT_ON)
- acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D3);
+ acpi_bus_set_power(ata_ap_acpi_handle(ap), ACPI_STATE_D3);
}
/**
@@ -980,7 +892,7 @@ int ata_acpi_on_devcfg(struct ata_device *dev)
int nr_executed = 0;
int rc;
- if (!dev->acpi_handle)
+ if (!ata_dev_acpi_handle(dev))
return 0;
/* do we need to do _GTF? */
@@ -1027,7 +939,6 @@ int ata_acpi_on_devcfg(struct ata_device *dev)
ata_dev_printk(dev, KERN_WARNING,
"ACPI: failed the second time, disabled\n");
- dev->acpi_handle = NULL;
/* We can safely continue if no _GTF command has been executed
* and port is not frozen.
@@ -1081,6 +992,9 @@ static int ata_acpi_bind_host(struct device *dev, int host, acpi_handle *handle)
if (!*handle)
return -ENODEV;
+ register_hotplug_dock_device(ata_ap_acpi_handle(ap),
+ &ata_acpi_ap_dock_ops, ap);
+
return 0;
}
@@ -1097,10 +1011,12 @@ static int ata_acpi_bind_device(struct device *dev, int channel, int id,
else
ata_dev = &ap->link.device[id];
- *handle = dev_acpi_handle(ata_dev);
+ *handle = ata_dev_acpi_handle(ata_dev);
if (!*handle)
return -ENODEV;
+ register_hotplug_dock_device(ata_dev_acpi_handle(ata_dev),
+ &ata_acpi_dev_dock_ops, dev);
return 0;
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 045a486..4830a20 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6099,9 +6099,6 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
if (rc)
return rc;
- /* associate with ACPI nodes */
- ata_acpi_associate(host);
-
/* set cable, sata_spd_limit and report */
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 619f2c3..c15f7a6 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -453,8 +453,6 @@ int sata_pmp_attach(struct ata_device *dev)
ata_for_each_link(tlink, ap, EDGE)
sata_link_init_spd(tlink);
- ata_acpi_associate_sata_port(ap);
-
return 0;
fail:
@@ -494,8 +492,6 @@ static void sata_pmp_detach(struct ata_device *dev)
ap->nr_pmp_links = 0;
link->pmp = 0;
spin_unlock_irqrestore(ap->lock, flags);
-
- ata_acpi_associate_sata_port(ap);
}
/**
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 89a1e00..e00c4c6 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -118,8 +118,6 @@ extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm);
/* libata-acpi.c */
#ifdef CONFIG_ATA_ACPI
-extern void ata_acpi_associate_sata_port(struct ata_port *ap);
-extern void ata_acpi_associate(struct ata_host *host);
extern void ata_acpi_dissociate(struct ata_host *host);
extern int ata_acpi_on_suspend(struct ata_port *ap);
extern void ata_acpi_on_resume(struct ata_port *ap);
@@ -127,8 +125,6 @@ extern int ata_acpi_on_devcfg(struct ata_device *dev);
extern void ata_acpi_on_disable(struct ata_device *dev);
extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state);
#else
-static inline void ata_acpi_associate_sata_port(struct ata_port *ap) { }
-static inline void ata_acpi_associate(struct ata_host *host) { }
static inline void ata_acpi_dissociate(struct ata_host *host) { }
static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
static inline void ata_acpi_on_resume(struct ata_port *ap) { }
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index d8f35fe..794534a 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -38,7 +38,7 @@ static int pacpi_pre_reset(struct ata_link *link, unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct pata_acpi *acpi = ap->private_data;
- if (ap->acpi_handle == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
+ if (ata_ap_acpi_handle(ap) == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
return -ENODEV;
return ata_sff_prereset(link, deadline);
@@ -196,7 +196,7 @@ static int pacpi_port_start(struct ata_port *ap)
int ret;
- if (ap->acpi_handle == NULL)
+ if (ata_ap_acpi_handle(ap) == NULL)
return -ENODEV;
acpi = ap->private_data = devm_kzalloc(&pdev->dev, sizeof(struct pata_acpi), GFP_KERNEL);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 3d501db..03b8540 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -514,9 +514,6 @@ struct ata_host {
void *private_data;
struct ata_port_operations *ops;
unsigned long flags;
-#ifdef CONFIG_ATA_ACPI
- acpi_handle acpi_handle;
-#endif
struct ata_port *simplex_claimed; /* channel owning the DMA */
struct ata_port *ports[0];
};
@@ -583,7 +580,6 @@ struct ata_device {
unsigned long flags; /* ATA_DFLAG_xxx */
struct scsi_device *sdev; /* attached SCSI device */
#ifdef CONFIG_ATA_ACPI
- acpi_handle acpi_handle;
union acpi_object *gtf_cache;
#endif
/* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
@@ -755,7 +751,6 @@ struct ata_port {
void *private_data;
#ifdef CONFIG_ATA_ACPI
- acpi_handle acpi_handle;
struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */
#endif
/* owned by EH */
@@ -1067,6 +1062,8 @@ int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm);
int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm);
unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev,
const struct ata_acpi_gtm *gtm);
+acpi_handle ata_ap_acpi_handle(struct ata_port *ap);
+acpi_handle ata_dev_acpi_handle(struct ata_device *dev);
int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm);
#else
static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
--
1.6.2.5
We want to be able to express the dependencies between ACPI dock
devices and their children. This requires us to be able to associate
the ACPI device tree and libata devices. This patch uses the generic
ACPI glue framework to do so.
Signed-off-by: Matthew Garrett <[email protected]>
---
drivers/ata/Kconfig | 1 +
drivers/ata/libata-acpi.c | 118 +++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 119 insertions(+), 0 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index b17c57f..2e192bf 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -30,6 +30,7 @@ config ATA_ACPI
bool "ATA ACPI Support"
depends on ACPI && PCI
select ACPI_DOCK
+ select SCSI_PLATFORM
default y
help
This option adds support for ATA-related ACPI objects.
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index ac176da..2d12a2c 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -56,6 +56,31 @@ static void ata_acpi_clear_gtf(struct ata_device *dev)
dev->gtf_cache = NULL;
}
+static acpi_handle ap_acpi_handle(struct ata_port *ap)
+{
+ if (ap->flags & ATA_FLAG_ACPI_SATA)
+ return NULL;
+ return DEVICE_ACPI_HANDLE(&ap->scsi_host->shost_gendev);
+}
+
+static acpi_handle dev_acpi_handle(struct ata_device *dev)
+{
+ acpi_integer adr;
+ struct ata_port *ap = dev->link->ap;
+
+ if (dev->sdev)
+ return DEVICE_ACPI_HANDLE(&dev->sdev->sdev_gendev);
+
+ if (ap->flags & ATA_FLAG_ACPI_SATA) {
+ if (!sata_pmp_attached(ap))
+ adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
+ else
+ adr = SATA_ADR(ap->port_no, dev->link->pmp);
+ return acpi_get_child(DEVICE_ACPI_HANDLE(ap->host->dev), adr);
+ } else
+ return acpi_get_child(ap_acpi_handle(ap), dev->devno);
+}
+
/**
* ata_acpi_associate_sata_port - associate SATA port with ACPI objects
* @ap: target SATA port
@@ -1026,3 +1051,96 @@ void ata_acpi_on_disable(struct ata_device *dev)
{
ata_acpi_clear_gtf(dev);
}
+
+static int is_pci_ata(struct device *dev)
+{
+ struct pci_dev *pdev;
+
+ if (!is_pci_dev(dev))
+ return 0;
+
+ pdev = to_pci_dev(dev);
+
+ if ((pdev->class >> 8) != PCI_CLASS_STORAGE_SATA &&
+ (pdev->class >> 8) != PCI_CLASS_STORAGE_IDE)
+ return 0;
+
+ return 1;
+}
+
+static int ata_acpi_bind_host(struct device *dev, int host, acpi_handle *handle)
+{
+ struct Scsi_Host *shost = dev_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+
+ if (ap->flags & ATA_FLAG_ACPI_SATA)
+ return -ENODEV;
+
+ *handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), ap->port_no);
+
+ if (!*handle)
+ return -ENODEV;
+
+ return 0;
+}
+
+static int ata_acpi_bind_device(struct device *dev, int channel, int id,
+ acpi_handle *handle)
+{
+ struct device *host = dev->parent->parent;
+ struct Scsi_Host *shost = dev_to_shost(host);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ata_device *ata_dev;
+
+ if (ap->flags & ATA_FLAG_ACPI_SATA)
+ ata_dev = &ap->link.device[channel];
+ else
+ ata_dev = &ap->link.device[id];
+
+ *handle = dev_acpi_handle(ata_dev);
+
+ if (!*handle)
+ return -ENODEV;
+
+ return 0;
+}
+
+static int ata_acpi_find_device(struct device *dev, acpi_handle *handle)
+{
+ unsigned int host, channel, id, lun;
+
+ if (sscanf(dev_name(dev), "host%u", &host) == 1) {
+ if (!is_pci_ata(dev->parent))
+ return -ENODEV;
+
+ return ata_acpi_bind_host(dev, host, handle);
+ } else if (sscanf(dev_name(dev), "%d:%d:%d:%d",
+ &host, &channel, &id, &lun) == 4) {
+ if (!is_pci_ata(dev->parent->parent->parent))
+ return -ENODEV;
+
+ return ata_acpi_bind_device(dev, channel, id, handle);
+ } else
+ return -ENODEV;
+}
+
+static int ata_acpi_find_dummy(struct device *dev, acpi_handle *handle)
+{
+ return -ENODEV;
+}
+
+static struct acpi_bus_type ata_acpi_bus = {
+ .bus = &scsi_bus_type,
+ .find_bridge = ata_acpi_find_dummy,
+ .find_device = ata_acpi_find_device,
+};
+
+int scsi_platform_register(void)
+{
+ return register_acpi_bus_type(&ata_acpi_bus);
+}
+
+void scsi_platform_unregister(void)
+{
+ unregister_acpi_bus_type(&ata_acpi_bus);
+}
--
1.6.2.5